LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
	Kevin Hilman <khilman@kernel.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Adam Ford <aford173@gmail.com>,
	linux-kernel@vger.kernel.org,
	David Lechner <david@lechnology.com>
Subject: [PATCH v9 27/27] ARM: dts: da850: Add clocks
Date: Thu, 26 Apr 2018 19:17:45 -0500	[thread overview]
Message-ID: <20180427001745.4116-28-david@lechnology.com> (raw)
In-Reply-To: <20180427001745.4116-1-david@lechnology.com>

This adds clock provider nodes for da850 and wires them up to all of the
devices.

Signed-off-by: David Lechner <david@lechnology.com>
---

v9 changes:
- change mcasp and vpif nodes from clocks to power-domains

v8 changes:
- fix typo in clock-names property of psc0
- added power-domains properties to nodes that define that property in their
  device tree bindings

v7 changes:
- move ref_clk frequency to board-specific DT files
- enable sata_refclk in da850-lcdk.dts
- drop async2 fixed factor clock
- add power-domains for devices that use them
- fix USB PHY clock-names property
- move assigned-clocks to PSC device node
- drop clocks property from devices that don't use it (e.g. EDMA)
- add clock to RTC node
- add clock-ranges to usb0 and aemif nodes
- add clock-names property to aemif node
- fix typo in psc1 clock-names

v6 changes:
- updated for device tree bindings changes earlier in this series
- use single async2 clock instead of duplicate fixed factor clocks
- add clock-names property to mdio node


 arch/arm/boot/dts/da850-enbw-cmc.dts |   4 +
 arch/arm/boot/dts/da850-evm.dts      |   4 +
 arch/arm/boot/dts/da850-lcdk.dts     |   9 ++
 arch/arm/boot/dts/da850-lego-ev3.dts |   4 +
 arch/arm/boot/dts/da850.dtsi         | 166 +++++++++++++++++++++++++++
 5 files changed, 187 insertions(+)

diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 14dff3e188ed..0102ffc5aa53 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -35,6 +35,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &edma0 {
 	ti,edma-reserved-slot-ranges = <32 50>;
 };
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 11cf3765214f..48f6318f4c69 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -200,6 +200,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 /include/ "tps6507x.dtsi"
 
 &tps {
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0edf769ea95c..0177e3ed20fe 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -123,6 +123,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -175,6 +179,11 @@
 	status = "okay";
 };
 
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 0a7cfa48b17e..9252ea2c3d3b 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -193,6 +193,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f6f1597b03df..acf71973fec7 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -32,6 +32,25 @@
 			reg = <0xfffee000 0x2000>;
 		};
 	};
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
 	dsp: dsp@11800000 {
 		compatible = "ti,da850-dsp";
 		reg = <0x11800000 0x40000>,
@@ -42,6 +61,7 @@
 		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
 		interrupt-parent = <&intc>;
 		interrupts = <28>;
+		clocks = <&psc0 15>;
 		status = "disabled";
 	};
 	soc@1c00000 {
@@ -52,6 +72,37 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
@@ -281,8 +332,41 @@
 			usb_phy: usb-phy {
 				compatible = "ti,da830-usb-phy";
 				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
 				status = "disabled";
 			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
 		};
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
@@ -294,18 +378,21 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
 		};
 		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
 		};
 		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
 		};
 		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
@@ -317,12 +404,14 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
 		};
 		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
 		};
 		serial0: serial@42000 {
 			compatible = "ti,da830-uart", "ns16550a";
@@ -330,6 +419,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
 			status = "disabled";
 		};
 		serial1: serial@10c000 {
@@ -338,6 +429,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
 			status = "disabled";
 		};
 		serial2: serial@10d000 {
@@ -346,6 +439,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
 			status = "disabled";
 		};
 		rtc0: rtc@23000 {
@@ -353,6 +448,8 @@
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
 			status = "disabled";
 		};
 		i2c0: i2c@22000 {
@@ -361,6 +458,7 @@
 			interrupts = <15>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		i2c1: i2c@228000 {
@@ -369,11 +467,19 @@
 			interrupts = <51>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
 			status = "disabled";
 		};
+		clocksource: timer@20000 {
+			compatible = "ti,davinci-timer";
+			reg = <0x20000 0x1000>;
+			clocks = <&pll0_auxclk>;
+		};
 		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		mmc0: mmc@40000 {
@@ -384,12 +490,14 @@
 			interrupts = <16>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
 			status = "disabled";
 		};
 		vpif: video@217000 {
 			compatible = "ti,da850-vpif";
 			reg = <0x217000 0x1000>;
 			interrupts = <92>;
+			power-domains = <&psc1 9>;
 			status = "disabled";
 
 			/* VPIF capture port */
@@ -412,6 +520,7 @@
 			interrupts = <72>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
@@ -419,6 +528,8 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
@@ -426,6 +537,8 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
@@ -433,6 +546,8 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
@@ -440,6 +555,8 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
@@ -447,6 +564,8 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
 			status = "disabled";
 		};
 		spi0: spi@41000 {
@@ -459,6 +578,8 @@
 			interrupts = <20>;
 			dmas = <&edma0 14 0>, <&edma0 15 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
 			status = "disabled";
 		};
 		spi1: spi@30e000 {
@@ -471,6 +592,8 @@
 			interrupts = <56>;
 			dmas = <&edma0 18 0>, <&edma0 19 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
 			status = "disabled";
 		};
 		usb0: usb@200000 {
@@ -482,6 +605,8 @@
 			dr_mode = "otg";
 			phys = <&usb_phy 0>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
 			status = "disabled";
 
 			#address-cells = <1>;
@@ -512,13 +637,31 @@
 			compatible = "ti,da850-ahci";
 			reg = <0x218000 0x2000>, <0x22c018 0x4>;
 			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
 			status = "disabled";
 		};
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		eth0: ethernet@220000 {
@@ -534,6 +677,8 @@
 					35
 					36
 					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		usb1: usb@225000 {
@@ -542,6 +687,7 @@
 			interrupts = <59>;
 			phys = <&usb_phy 1>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
 			status = "disabled";
 		};
 		gpio: gpio@226000 {
@@ -556,6 +702,8 @@
 				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
 			status = "disabled";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -704,6 +852,17 @@
 				      <&pmx_core 142 147 1>,
 				      <&pmx_core 143 146 1>;
 		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
 		pinconf: pin-controller@22c00c {
 			compatible = "ti,da850-pupd";
 			reg = <0x22c00c 0x8>;
@@ -717,6 +876,7 @@
 			reg-names = "mpu", "dat";
 			interrupts = <54>;
 			interrupt-names = "common";
+			power-domains = <&psc1 7>;
 			status = "disabled";
 			dmas = <&edma0 1 1>,
 				<&edma0 0 1>;
@@ -728,6 +888,9 @@
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
 			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
 			status = "disabled";
 		};
 	};
@@ -739,6 +902,9 @@
 		reg = <0x68000000 0x00008000>;
 		ranges = <0 0 0x60000000 0x08000000
 			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
 		status = "disabled";
 	};
 	memctrl: memory-controller@b0000000 {
-- 
2.17.0

  parent reply	other threads:[~2018-04-27  0:19 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27  0:17 [PATCH v9 00/27] ARM: davinci: convert to common clock framework​ David Lechner
2018-04-27  0:17 ` [PATCH v9 01/27] clk: davinci: pll: allow dev == NULL David Lechner
2018-05-01 13:27   ` Sekhar Nori
2018-05-02  1:44     ` David Lechner
2018-04-27  0:17 ` [PATCH v9 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE David Lechner
2018-05-01 13:46   ` Sekhar Nori
2018-05-02  1:46     ` David Lechner
2018-04-27  0:17 ` [PATCH v9 03/27] clk: davinci: psc: allow for dev == NULL David Lechner
2018-05-01 14:02   ` Sekhar Nori
2018-05-02  1:49     ` David Lechner
2018-05-02 15:08       ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 04/27] ARM: davinci: pass clock as parameter to davinci_timer_init() David Lechner
2018-05-01 14:09   ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 05/27] ARM: davinci: da830: add new clock init using common clock framework David Lechner
2018-05-01 14:13   ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 06/27] ARM: davinci: da850: " David Lechner
2018-05-01 14:17   ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 07/27] ARM: davinci: dm355: " David Lechner
2018-05-03 15:34   ` Sekhar Nori
2018-05-03 15:44     ` David Lechner
2018-05-04 10:01       ` Sekhar Nori
2018-05-04 14:26         ` David Lechner
2018-04-27  0:17 ` [PATCH v9 08/27] ARM: davinci: dm365: " David Lechner
2018-04-27  0:17 ` [PATCH v9 09/27] ARM: davinci: dm644x: " David Lechner
2018-05-03 13:18   ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 10/27] ARM: davinci: dm646x: " David Lechner
2018-04-27  0:17 ` [PATCH v9 11/27] ARM: davinci: da8xx: add new USB PHY " David Lechner
2018-04-27  0:17 ` [PATCH v9 12/27] ARM: davinci: da8xx: add new sata_refclk " David Lechner
2018-04-27  0:17 ` [PATCH v9 13/27] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-04-27  0:17 ` [PATCH v9 14/27] ARM: davinci_all_defconfig: " David Lechner
2018-04-27  0:17 ` [PATCH v9 15/27] ARM: davinci: switch to common clock framework David Lechner
2018-04-27  0:17 ` [PATCH v9 16/27] ARM: davinci: da830: Remove legacy clock init David Lechner
2018-04-27  0:17 ` [PATCH v9 17/27] ARM: davinci: da850: " David Lechner
2018-04-27  0:17 ` [PATCH v9 18/27] ARM: davinci: dm355: " David Lechner
2018-04-27  0:17 ` [PATCH v9 19/27] ARM: davinci: dm365: " David Lechner
2018-04-27  0:17 ` [PATCH v9 20/27] ARM: davinci: dm644x: " David Lechner
2018-04-27  0:17 ` [PATCH v9 21/27] ARM: davinci: dm646x: " David Lechner
2018-04-27  0:17 ` [PATCH v9 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA " David Lechner
2018-04-27  0:17 ` [PATCH v9 23/27] ARM: davinci: remove legacy clocks David Lechner
2018-04-27  0:17 ` [PATCH v9 24/27] dt-bindings: timer: new bindings for TI DaVinci timer David Lechner
2018-04-27 14:05   ` Rob Herring
2018-05-02  1:52     ` David Lechner
2018-05-02  5:03       ` Sekhar Nori
2018-04-27  0:17 ` [PATCH v9 25/27] ARM: davinci: add device tree support to timer David Lechner
2018-04-27  0:17 ` [PATCH v9 26/27] ARM: davinci: da8xx-dt: switch to device tree clocks David Lechner
2018-04-27  9:53   ` Bartosz Golaszewski
2018-04-27  0:17 ` David Lechner [this message]
2018-04-27 12:04 ` [PATCH v9 00/27] ARM: davinci: convert to common clock framework​ Bartosz Golaszewski
2018-04-30 20:35 ` Bartosz Golaszewski
2018-05-01 14:45 ` Sekhar Nori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180427001745.4116-28-david@lechnology.com \
    --to=david@lechnology.com \
    --cc=aford173@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --subject='Re: [PATCH v9 27/27] ARM: dts: da850: Add clocks' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).