LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, <linux-mmc@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, <kishon@ti.com>
Subject: [PATCH v5 03/14] mmc: sdhci-omap: Workaround for Errata i843
Date: Fri, 27 Apr 2018 17:17:12 +0530	[thread overview]
Message-ID: <20180427114723.2687-4-kishon@ti.com> (raw)
In-Reply-To: <20180427114723.2687-1-kishon@ti.com>

Errata i843 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429K July 2014–Revised March 2017 [1]) mentions
PG 1.0/1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3
can operate.

Use soc_device_match() to identify rev 1.0/1.1 silicon and
override mmc->f_max according to the errata workaround.
"max-frequency" dt property cannot be used since the device
tree is added for rev 2.0 silicon.

soc_device_match() is also used in order to get the IODelay values
for rev 1.0/1.1 silicon.

[1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/sdhci-omap.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 78f3ceea570e..b3dc7f1466e5 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -26,6 +26,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/sys_soc.h>
 
 #include "sdhci-pltfm.h"
 
@@ -100,6 +101,7 @@ struct sdhci_omap_data {
 };
 
 struct sdhci_omap_host {
+	char			*version;
 	void __iomem		*base;
 	struct device		*dev;
 	struct	regulator	*pbias;
@@ -733,12 +735,21 @@ static struct pinctrl_state
 				  u32 *caps, u32 capmask)
 {
 	struct device *dev = omap_host->dev;
+	char *version = omap_host->version;
 	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
+	char str[20];
 
 	if (!(*caps & capmask))
 		goto ret;
 
-	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+	if (version) {
+		snprintf(str, 20, "%s-%s", mode, version);
+		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, str);
+	}
+
+	if (IS_ERR(pinctrl_state))
+		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+
 	if (IS_ERR(pinctrl_state)) {
 		dev_err(dev, "no pinctrl state for %s mode", mode);
 		*caps &= ~capmask;
@@ -830,6 +841,16 @@ static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
 	return 0;
 }
 
+static const struct soc_device_attribute sdhci_omap_soc_devices[] = {
+	{
+		.machine = "DRA7[45]*",
+		.revision = "ES1.[01]",
+	},
+	{
+		/* sentinel */
+	}
+};
+
 static int sdhci_omap_probe(struct platform_device *pdev)
 {
 	int ret;
@@ -841,6 +862,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	struct mmc_host *mmc;
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
+	const struct soc_device_attribute *soc;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -875,6 +897,17 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_pltfm_free;
 
+	soc = soc_device_match(sdhci_omap_soc_devices);
+	if (soc) {
+		omap_host->version = "rev11";
+		if (!strcmp(dev_name(dev), "4809c000.mmc"))
+			mmc->f_max = 96000000;
+		if (!strcmp(dev_name(dev), "480b4000.mmc"))
+			mmc->f_max = 48000000;
+		if (!strcmp(dev_name(dev), "480ad000.mmc"))
+			mmc->f_max = 48000000;
+	}
+
 	pltfm_host->clk = devm_clk_get(dev, "fck");
 	if (IS_ERR(pltfm_host->clk)) {
 		ret = PTR_ERR(pltfm_host->clk);
-- 
2.17.0

  parent reply	other threads:[~2018-04-27 11:47 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27 11:47 [PATCH v5 00/14] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 01/14] mmc: sdhci-omap: Fix when capabilities are obtained from SDHCI_CAPABILITIES reg Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 02/14] mmc: sdhci-omap: Remove setting ADMA capability in driver Kishon Vijay Abraham I
2018-04-27 11:47 ` Kishon Vijay Abraham I [this message]
2018-04-27 11:47 ` [PATCH v5 04/14] mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt properties Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 05/14] mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support 1.8v Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 06/14] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 07/14] mmc: sdhci: Factor out target_timeout calculation Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 08/14] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 09/14] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 10/14] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 11/14] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 12/14] mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq Kishon Vijay Abraham I
2018-04-27 11:47 ` [PATCH v5 13/14] dt-bindings: sdhci-omap: Add pinctrl bindings Kishon Vijay Abraham I
2018-04-27 14:26   ` Rob Herring
2018-04-27 11:47 ` [PATCH v5 14/14] mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode Kishon Vijay Abraham I
2018-05-02 13:15 ` [PATCH v5 00/14] mmc: sdhci-omap: Add UHS/HS200 mode support Ulf Hansson
2018-05-02 14:55   ` Tony Lindgren
2018-05-03  8:51     ` Ulf Hansson
2018-05-03 14:12       ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180427114723.2687-4-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH v5 03/14] mmc: sdhci-omap: Workaround for Errata i843' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).