LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: hans.verkuil@cisco.com, mchehab@kernel.org,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: media: i2c: Add mt9t111 image sensor
Date: Tue, 1 May 2018 09:28:16 -0500	[thread overview]
Message-ID: <20180501142816.GA15492@rob-hp-laptop> (raw)
In-Reply-To: <1524654014-17852-2-git-send-email-jacopo+renesas@jmondi.org>

On Wed, Apr 25, 2018 at 01:00:13PM +0200, Jacopo Mondi wrote:
> Add device tree bindings documentation for Micron MT9T111/MT9T112 image
> sensors.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  Documentation/devicetree/bindings/mt9t112.txt | 41 +++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mt9t112.txt
> 
> diff --git a/Documentation/devicetree/bindings/mt9t112.txt b/Documentation/devicetree/bindings/mt9t112.txt
> new file mode 100644
> index 0000000..cbad475
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mt9t112.txt
> @@ -0,0 +1,41 @@
> +Micron 3.1Mp CMOS Digital Image Sensor
> +--------------------------------------
> +
> +The Micron MT9T111 and MT9T112 are 1/4 inch 3.1Mp System-On-A-Chip (SOC) CMOS
> +digital image sensors which support up to QXGA (2048x1536) image resolution in
> +4/3 format.
> +
> +The sensors can be programmed through a two-wire serial interface and can
> +work both in parallel data output mode as well as in MIPI CSI-2 mode.
> +
> +Required Properties:
> +- compatible: shall be one of the following values
> +  	"micron,mt9t111" for MT9T111 sensors
> +	"micron,mt9t112" for MT9T112 sensors
> +
> +Optional properties:
> +- powerdown-gpios: reference to powerdown input GPIO signal. Pin name "STANDBY".
> +  Active level is high.
> +
> +The device node shall contain one 'port' sub-node with one 'endpoint' child
> +node, modeled accordingly to bindings described in:
> +Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +--------
> +
> +	mt9t112@3d {

camera-sensor@3d

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>

> +		compatible = "micron,mt9t112";
> +		reg = <0x3d>;
> +
> +		powerdown-gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
> +
> +		port {
> +			mt9t112_out: endpoint {
> +				pclk-sample = <1>;
> +				remote-endpoint = <&ceu_in>;
> +			};
> +		};
> +	};
> +
> +
> -- 
> 2.7.4
> 

  reply	other threads:[~2018-05-01 14:28 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25 11:00 [PATCH 0/2] media: i2c: mt9t112: Add OF tree support Jacopo Mondi
2018-04-25 11:00 ` [PATCH 1/2] dt-bindings: media: i2c: Add mt9t111 image sensor Jacopo Mondi
2018-05-01 14:28   ` Rob Herring [this message]
2018-05-07  9:17   ` Sakari Ailus
2018-04-25 11:00 ` [PATCH 2/2] media: i2c: mt9t112: Add device tree support Jacopo Mondi
2018-05-07  9:32   ` Sakari Ailus
2018-05-14 14:30     ` jacopo mondi
2018-05-14 21:50       ` Sakari Ailus
2018-05-15  7:10         ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180501142816.GA15492@rob-hp-laptop \
    --to=robh@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --subject='Re: [PATCH 1/2] dt-bindings: media: i2c: Add mt9t111 image sensor' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).