LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v8] PCI: hv: Make sure the bus domain is really unique
@ 2018-05-01 17:56 Sridhar Pitchai
  2018-05-03 11:35 ` Lorenzo Pieralisi
  0 siblings, 1 reply; 2+ messages in thread
From: Sridhar Pitchai @ 2018-05-01 17:56 UTC (permalink / raw)
  To: Lorenzo Pieralisi, Bjorn Helgaas, Haiyang Zhang
  Cc: devel, Stephen Hemminger, linux-kernel, linux-pci

When Linux runs as a guest VM in Hyper-V and Hyper-V adds the virtual PCI
bus to the guest, Hyper-V always provides unique PCI domain.

commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
overrode unique domain with the serial number of the first device added to
the virtual PCI bus.

The reason for that patch was to have a consistent and short name for the
device, but Hyper-V doesn't provide unique serial numbers. Using non-unique
serial numbers as domain IDs leads to duplicate device addresses, which
causes PCI bus registration to fail.

commit 0c195567a8f6 ("netvsc: transparent VF management") avoids the need
for commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
domain").  When scripts were used to configure VF devices, the name of
the VF needed to be consistent and short, but with commit 0c195567a8f6
("netvsc: transparent VF management") all the setup is done in the kernel,
and we do not need to maintain consistent name.

Revert commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
domain") so we can reliably support multiple devices being assigned to
a guest.

This revert should only be backported to kernels that contain commit
0c195567a8f6 ("netvsc: transparent VF management").

Fixes: 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
Signed-off-by: Sridhar Pitchai <sridhar.pitchai@microsoft.com>
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>

---
Changes in v8:
* fix the commit comment. [Lorenzo Pieralisi, Bjorn Helgaas]
---
 drivers/pci/host/pci-hyperv.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index 2faf38eab785..ac67e56e451a 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -1518,17 +1518,6 @@ static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
 	get_pcichild(hpdev, hv_pcidev_ref_childlist);
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 
-	/*
-	 * When a device is being added to the bus, we set the PCI domain
-	 * number to be the device serial number, which is non-zero and
-	 * unique on the same VM.  The serial numbers start with 1, and
-	 * increase by 1 for each device.  So device names including this
-	 * can have shorter names than based on the bus instance UUID.
-	 * Only the first device serial number is used for domain, so the
-	 * domain number will not change after the first device is added.
-	 */
-	if (list_empty(&hbus->children))
-		hbus->sysdata.domain = desc->ser;
 	list_add_tail(&hpdev->list_entry, &hbus->children);
 	spin_unlock_irqrestore(&hbus->device_list_lock, flags);
 	return hpdev;
-- 
2.14.1


_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH v8] PCI: hv: Make sure the bus domain is really unique
  2018-05-01 17:56 [PATCH v8] PCI: hv: Make sure the bus domain is really unique Sridhar Pitchai
@ 2018-05-03 11:35 ` Lorenzo Pieralisi
  0 siblings, 0 replies; 2+ messages in thread
From: Lorenzo Pieralisi @ 2018-05-03 11:35 UTC (permalink / raw)
  To: Sridhar Pitchai
  Cc: Stephen Hemminger, linux-pci, Haiyang Zhang, linux-kernel,
	Bjorn Helgaas, devel

On Tue, May 01, 2018 at 05:56:32PM +0000, Sridhar Pitchai wrote:
> When Linux runs as a guest VM in Hyper-V and Hyper-V adds the virtual PCI
> bus to the guest, Hyper-V always provides unique PCI domain.
> 
> commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
> overrode unique domain with the serial number of the first device added to
> the virtual PCI bus.
> 
> The reason for that patch was to have a consistent and short name for the
> device, but Hyper-V doesn't provide unique serial numbers. Using non-unique
> serial numbers as domain IDs leads to duplicate device addresses, which
> causes PCI bus registration to fail.
> 
> commit 0c195567a8f6 ("netvsc: transparent VF management") avoids the need
> for commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
> domain").  When scripts were used to configure VF devices, the name of
> the VF needed to be consistent and short, but with commit 0c195567a8f6
> ("netvsc: transparent VF management") all the setup is done in the kernel,
> and we do not need to maintain consistent name.
> 
> Revert commit 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI
> domain") so we can reliably support multiple devices being assigned to
> a guest.
> 
> This revert should only be backported to kernels that contain commit
> 0c195567a8f6 ("netvsc: transparent VF management").

I removed this last paragraph, the information is in the stable tag
below.

> Fixes: 4a9b0933bdfc ("PCI: hv: Use device serial number as PCI domain")
> Signed-off-by: Sridhar Pitchai <sridhar.pitchai@microsoft.com>
> Cc: stable@vger.kernel.org # v4.14+
> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
> 
> ---
> Changes in v8:
> * fix the commit comment. [Lorenzo Pieralisi, Bjorn Helgaas]
> ---
>  drivers/pci/host/pci-hyperv.c | 11 -----------
>  1 file changed, 11 deletions(-)

Applied to pci/hv for v4.18, thanks.

Lorenzo

> diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
> index 2faf38eab785..ac67e56e451a 100644
> --- a/drivers/pci/host/pci-hyperv.c
> +++ b/drivers/pci/host/pci-hyperv.c
> @@ -1518,17 +1518,6 @@ static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
>  	get_pcichild(hpdev, hv_pcidev_ref_childlist);
>  	spin_lock_irqsave(&hbus->device_list_lock, flags);
>  
> -	/*
> -	 * When a device is being added to the bus, we set the PCI domain
> -	 * number to be the device serial number, which is non-zero and
> -	 * unique on the same VM.  The serial numbers start with 1, and
> -	 * increase by 1 for each device.  So device names including this
> -	 * can have shorter names than based on the bus instance UUID.
> -	 * Only the first device serial number is used for domain, so the
> -	 * domain number will not change after the first device is added.
> -	 */
> -	if (list_empty(&hbus->children))
> -		hbus->sysdata.domain = desc->ser;
>  	list_add_tail(&hpdev->list_entry, &hbus->children);
>  	spin_unlock_irqrestore(&hbus->device_list_lock, flags);
>  	return hpdev;
> -- 
> 2.14.1
> 
> 
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-05-03 11:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-01 17:56 [PATCH v8] PCI: hv: Make sure the bus domain is really unique Sridhar Pitchai
2018-05-03 11:35 ` Lorenzo Pieralisi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).