LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Danny Milosavljevic <dannym@scratchpost.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Chen-Yu Tsai <wens@csie.org>,
	Andrea Bondavalli <andrea.bondavalli74@gmail.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Icenowy Zheng <icenowy@aosc.xyz>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v14 2/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume
Date: Thu, 3 May 2018 16:33:19 +0200	[thread overview]
Message-ID: <20180503143319.4vyh2y5sluatssnv@flea> (raw)
In-Reply-To: <20180502210800.1971-3-dannym@scratchpost.org>

[-- Attachment #1: Type: text/plain, Size: 4655 bytes --]

On Wed, May 02, 2018 at 11:07:54PM +0200, Danny Milosavljevic wrote:
> Add Mic1 Boost Volume and Mic2 Boost Volume for Allwinner A10 and Allwinner
> A20.  Also add support for extra controls to the sun4i_codec_quirks because
> the A10 and A20 have Mic1 Boost Volume at different places (likewise for
> Mic2 Boost Volume).

A good rule of thumb is that when you have "also" in your commit log,
you should do another patch instead doing that instead.

> 
> Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
> ---
>  sound/soc/sunxi/sun4i-codec.c | 66 ++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 56 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index 060a40b45ab0..4af286f44a67 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -95,6 +95,8 @@
>  #define SUN4I_CODEC_ADC_ACTL_PREG1EN			(29)
>  #define SUN4I_CODEC_ADC_ACTL_PREG2EN			(28)
>  #define SUN4I_CODEC_ADC_ACTL_VMICEN			(27)
> +#define SUN4I_CODEC_ADC_ACTL_PREG1			(25)
> +#define SUN4I_CODEC_ADC_ACTL_PREG2			(23)
>  #define SUN4I_CODEC_ADC_ACTL_VADCG			(20)
>  #define SUN4I_CODEC_ADC_ACTL_ADCIS			(17)
>  #define SUN4I_CODEC_ADC_ACTL_PA_EN			(4)
> @@ -111,6 +113,9 @@
>  /* Microphone controls (sun7i only) */
>  #define SUN7I_CODEC_AC_MIC_PHONE_CAL		(0x3c)
>  
> +#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1		(29)
> +#define SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2		(26)
> +
>  /*
>   * sun6i specific registers
>   *
> @@ -676,6 +681,12 @@ static const struct snd_kcontrol_new sun4i_codec_pa_mute =
>  static DECLARE_TLV_DB_SCALE(sun4i_codec_pa_volume_scale, -6300, 100, 1);
>  static DECLARE_TLV_DB_SCALE(sun4i_codec_micin_loopback_gain_scale, -450, 150,
>  			    0);
> +static DECLARE_TLV_DB_RANGE(sun4i_codec_micin_preamp_gain_scale,
> +			    0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
> +			    1, 7, TLV_DB_SCALE_ITEM(3500, 300, 0));
> +static DECLARE_TLV_DB_RANGE(sun7i_codec_micin_preamp_gain_scale,
> +			    0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
> +			    1, 7, TLV_DB_SCALE_ITEM(2400, 300, 0));
>  
>  static const struct snd_kcontrol_new sun4i_codec_controls[] = {
>  	SOC_SINGLE_TLV("Power Amplifier Volume", SUN4I_CODEC_DAC_ACTL,
> @@ -686,6 +697,24 @@ static const struct snd_kcontrol_new sun4i_codec_controls[] = {
>  		       sun4i_codec_micin_loopback_gain_scale),
>  };
>  
> +static const struct snd_kcontrol_new sun4i_codec_extra_controls[] = {
> +	SOC_SINGLE_TLV("Mic1 Boost Volume", SUN4I_CODEC_ADC_ACTL,
> +		       SUN4I_CODEC_ADC_ACTL_PREG1, 3, 0,
> +		       sun4i_codec_micin_preamp_gain_scale),
> +	SOC_SINGLE_TLV("Mic2 Boost Volume", SUN4I_CODEC_ADC_ACTL,
> +		       SUN4I_CODEC_ADC_ACTL_PREG2, 3, 0,
> +		       sun4i_codec_micin_preamp_gain_scale),
> +};
> +
> +static const struct snd_kcontrol_new sun7i_codec_extra_controls[] = {
> +	SOC_SINGLE_TLV("Mic1 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
> +		       SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG1, 7, 0,
> +		       sun7i_codec_micin_preamp_gain_scale),
> +	SOC_SINGLE_TLV("Mic2 Boost Volume", SUN7I_CODEC_AC_MIC_PHONE_CAL,
> +		       SUN7I_CODEC_AC_MIC_PHONE_CAL_PREG2, 7, 0,
> +		       sun7i_codec_micin_preamp_gain_scale),
> +};
> +
>  static const struct snd_kcontrol_new sun4i_codec_left_mixer_controls[] = {
>  	SOC_DAPM_SINGLE("Left DAC Playback Switch", SUN4I_CODEC_DAC_ACTL,
>  			SUN4I_CODEC_DAC_ACTL_LDACLMIXS, 1, 0),
> @@ -807,7 +836,30 @@ static const struct snd_soc_dapm_route sun4i_codec_codec_dapm_routes[] = {
>  	{ "Mic2", NULL, "VMIC" },
>  };
>  
> +struct sun4i_codec_quirks {
> +	const struct regmap_config *regmap_config;
> +	const struct snd_soc_component_driver *codec;
> +	struct snd_soc_card * (*create_card)(struct device *dev);
> +	struct reg_field reg_adc_fifoc;	/* used for regmap_field */
> +	unsigned int reg_dac_txdata;	/* TX FIFO offset for DMA config */
> +	unsigned int reg_adc_rxdata;	/* RX FIFO offset for DMA config */
> +	bool has_reset;
> +	const struct snd_kcontrol_new *controls;
> +	unsigned int num_controls;
> +};
> +
> +static int sun4i_codec_component_driver_probe(struct snd_soc_component *codec)
> +{
> +	const struct sun4i_codec_quirks *quirks;
> +
> +	quirks = of_device_get_match_data(codec->dev);
> +	return snd_soc_add_component_controls(codec,
> +					      quirks->controls,
> +					      quirks->num_controls);

Why not just extending the sun4i_codec_controls to add it, and create
a duplicate one for the A20?


-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2018-05-03 14:33 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-02 21:07 [PATCH v14 0/8] ASoC: sun4i-codec: Add Line-In, FM-In, Mic 2, Capture Source, Differential Line-In Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 1/8] ASoC: sun4i-codec: Add MIC2 Pre-Amplifier, Mic2, Mic Playback Volume Danny Milosavljevic
2018-05-03 14:30   ` Maxime Ripard
2018-05-02 21:07 ` [PATCH v14 2/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume Danny Milosavljevic
2018-05-03 14:33   ` Maxime Ripard [this message]
2018-05-05  7:05     ` Danny Milosavljevic
2018-05-14 14:05       ` Maxime Ripard
2018-05-02 21:07 ` [PATCH v14 3/8] ASoC: sun4i-codec: Merge sun4i_codec_left_mixer_controls and sun4i_codec_right_mixer_controls into sun4i_codec_mixer_controls Danny Milosavljevic
2018-05-03 14:46   ` Maxime Ripard
2018-05-05  6:51     ` Danny Milosavljevic
2018-05-14 14:06       ` Maxime Ripard
2018-05-02 21:07 ` [PATCH v14 4/8] ASoC: sun4i-codec: Add Mic1 Playback Switch, Mic2 Playback Switch Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 5/8] ASoC: sun4i-codec: Add FM Playback Volume, FM Left, FM Right, FM " Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 6/8] ASoC: sun4i-codec: Add Line Playback Volume, Line Boost Volume, Line Right, Line Left, Line " Danny Milosavljevic
2018-05-02 21:07 ` [PATCH v14 7/8] ASoC: sun4i-codec: Add Differential Line Source Danny Milosavljevic
2018-05-02 21:08 ` [PATCH v14 8/8] ASoC: sun4i-codec: Add Left Capture Select, Right Capture Select Danny Milosavljevic
2018-05-03 14:54   ` Maxime Ripard
2018-05-05 10:40     ` Danny Milosavljevic
2018-05-14 14:11       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180503143319.4vyh2y5sluatssnv@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andrea.bondavalli74@gmail.com \
    --cc=broonie@kernel.org \
    --cc=dannym@scratchpost.org \
    --cc=fabio.estevam@nxp.com \
    --cc=icenowy@aosc.xyz \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=p.zabel@pengutronix.de \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    --subject='Re: [PATCH v14 2/8] ASoC: sun4i-codec: Add Mic1 Boost Volume, Mic2 Boost Volume' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).