LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v5 0/7] phy: qcom: Updates for USB PHYs on SDM845
@ 2018-05-02 21:06 Manu Gautam
  2018-05-02 21:06 ` [PATCH v5 1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk Manu Gautam
                   ` (6 more replies)
  0 siblings, 7 replies; 18+ messages in thread
From: Manu Gautam @ 2018-05-02 21:06 UTC (permalink / raw)
  To: Kishon Vijay Abraham I, robh, sboyd
  Cc: devicetree, linux-kernel, dianders, evgreen, Vivek Gautam,
	linux-arm-msm, linux-usb, Manu Gautam

SDM845 has two USB instances each with QUSB2 and QMP PHYs.
One of the QMP PHY is USB-DP (DisplayPort) combo PHY where
as other one is single lane UNI-PHY (without DP support).
Changes are related to PHY configuration for electrical
parameters tuning to improve eye-diagram and some fixes.

First gcc-msm8996 driver patch is dependent on following
patch which is now applied by Stephen.
https://patchwork.kernel.org/patch/10375043/


Changes since v4:
 - Addressed Doug's review comments to have QUSB2 PHY tuning
   values in header file.
 - Updated msm8996-gcc patch to use BRANCH_HALT_SKIP flag
   added by patch - https://patchwork.kernel.org/patch/10375041/
   
Changes since v3:
 - As per Doug's review comments added device tree parameters
   to handle board level differences in PHY tuning values instead
   of adding separate device tree bindings.
 - Replace PHY version specific bindings names with SOC name as
   no one is going to use generic binding names.
 - Update halt_check to not check for pipe clock status that
   allows to simplify pipe_clk handling in QMP driver.

Changes since v2:
 - Use separate phy_ops for USB to not register power_on op.
 - And other minor changes as per review comments from Stephen.

Changes since v1:
 - Updated qusb2 compatibility name as per comment from Vivek.

Manu Gautam (7):
  clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
  phy: qcom-qmp: Enable pipe_clk before PHY initialization
  phy: qcom-qusb2: Fix crash if nvmem cell not specified
  dt-bindings: phy-qcom-qmp: Update bindings for sdm845
  phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845
  dt-bindings: phy-qcom-usb2: Add support to override tuning values
  phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845

 .../devicetree/bindings/phy/qcom-qmp-phy.txt       |   3 +-
 .../devicetree/bindings/phy/qcom-qusb2-phy.txt     |  23 ++-
 drivers/clk/qcom/gcc-msm8996.c                     |   4 +
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 169 +++++++++++++++++++--
 drivers/phy/qualcomm/phy-qcom-qmp.h                |   5 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c              | 130 +++++++++++++++-
 include/dt-bindings/phy/phy-qcom-qusb2.h           |  37 +++++
 7 files changed, 346 insertions(+), 25 deletions(-)
 create mode 100644 include/dt-bindings/phy/phy-qcom-qusb2.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2018-06-01 18:45 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-02 21:06 [PATCH v5 0/7] phy: qcom: Updates for USB PHYs on SDM845 Manu Gautam
2018-05-02 21:06 ` [PATCH v5 1/7] clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk Manu Gautam
2018-05-03 10:41   ` kbuild test robot
2018-05-04 19:46   ` Doug Anderson
2018-06-01 18:45   ` Stephen Boyd
2018-05-02 21:06 ` [PATCH v5 2/7] phy: qcom-qmp: Enable pipe_clk before PHY initialization Manu Gautam
2018-05-04 19:47   ` Doug Anderson
2018-05-02 21:06 ` [PATCH v5 3/7] phy: qcom-qusb2: Fix crash if nvmem cell not specified Manu Gautam
2018-05-02 21:06 ` [PATCH v5 4/7] dt-bindings: phy-qcom-qmp: Update bindings for sdm845 Manu Gautam
2018-05-07 14:08   ` Rob Herring
2018-05-02 21:06 ` [PATCH v5 5/7] phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support " Manu Gautam
2018-05-02 21:06 ` [PATCH v5 6/7] dt-bindings: phy-qcom-usb2: Add support to override tuning values Manu Gautam
2018-05-04 19:47   ` Doug Anderson
2018-05-07 15:53   ` Rob Herring
2018-05-07 15:57     ` Doug Anderson
2018-05-07 20:40       ` Rob Herring
2018-05-02 21:06 ` [PATCH v5 7/7] phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845 Manu Gautam
2018-05-04 19:47   ` Doug Anderson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).