LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mathieu Malaterre <malat@debian.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Mathieu Malaterre <malat@debian.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3] arm: exynos/s3c: dts: Remove leading 0x and 0s from bindings notation
Date: Thu, 3 May 2018 20:44:53 +0200 [thread overview]
Message-ID: <20180503184454.19131-1-malat@debian.org> (raw)
In-Reply-To: <20180502201153.7459-1-malat@debian.org>
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]\+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0\+\(.*\) {/@\1 {/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
v3: remove extra 0 preventing correct fixup
v2: intermediate patch contained unrelated changes. restrict to S3 and Exynos*
arch/arm/boot/dts/exynos5420.dtsi | 36 +++++++++++++--------------
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 2 +-
arch/arm/boot/dts/s3c2416.dtsi | 8 +++---
3 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a97f71..633952a96427 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -761,7 +761,7 @@
#include "exynos5420-tmu-sensor-conf.dtsi"
};
- sysmmu_g2dr: sysmmu@0x10A60000 {
+ sysmmu_g2dr: sysmmu@10a60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
interrupt-parent = <&combiner>;
@@ -771,7 +771,7 @@
#iommu-cells = <0>;
};
- sysmmu_g2dw: sysmmu@0x10A70000 {
+ sysmmu_g2dw: sysmmu@10a70000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A70000 0x1000>;
interrupt-parent = <&combiner>;
@@ -781,7 +781,7 @@
#iommu-cells = <0>;
};
- sysmmu_tv: sysmmu@0x14650000 {
+ sysmmu_tv: sysmmu@14650000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14650000 0x1000>;
interrupt-parent = <&combiner>;
@@ -792,7 +792,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl0: sysmmu@0x13E80000 {
+ sysmmu_gscl0: sysmmu@13e80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
@@ -803,7 +803,7 @@
#iommu-cells = <0>;
};
- sysmmu_gscl1: sysmmu@0x13E90000 {
+ sysmmu_gscl1: sysmmu@13e90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E90000 0x1000>;
interrupt-parent = <&combiner>;
@@ -814,7 +814,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler0r: sysmmu@0x12880000 {
+ sysmmu_scaler0r: sysmmu@12880000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12880000 0x1000>;
interrupt-parent = <&combiner>;
@@ -824,7 +824,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler1r: sysmmu@0x12890000 {
+ sysmmu_scaler1r: sysmmu@12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
@@ -833,7 +833,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler2r: sysmmu@0x128A0000 {
+ sysmmu_scaler2r: sysmmu@128a0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -842,7 +842,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler0w: sysmmu@0x128C0000 {
+ sysmmu_scaler0w: sysmmu@128c0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128C0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -852,7 +852,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler1w: sysmmu@0x128D0000 {
+ sysmmu_scaler1w: sysmmu@128d0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128D0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -862,7 +862,7 @@
#iommu-cells = <0>;
};
- sysmmu_scaler2w: sysmmu@0x128E0000 {
+ sysmmu_scaler2w: sysmmu@128e0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128E0000 0x1000>;
interrupt-parent = <&combiner>;
@@ -872,7 +872,7 @@
#iommu-cells = <0>;
};
- sysmmu_rotator: sysmmu@0x11D40000 {
+ sysmmu_rotator: sysmmu@11d40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11D40000 0x1000>;
interrupt-parent = <&combiner>;
@@ -882,7 +882,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg0: sysmmu@0x11F10000 {
+ sysmmu_jpeg0: sysmmu@11f10000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F10000 0x1000>;
interrupt-parent = <&combiner>;
@@ -892,7 +892,7 @@
#iommu-cells = <0>;
};
- sysmmu_jpeg1: sysmmu@0x11F20000 {
+ sysmmu_jpeg1: sysmmu@11f20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -901,7 +901,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_l: sysmmu@0x11200000 {
+ sysmmu_mfc_l: sysmmu@11200000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11200000 0x1000>;
interrupt-parent = <&combiner>;
@@ -912,7 +912,7 @@
#iommu-cells = <0>;
};
- sysmmu_mfc_r: sysmmu@0x11210000 {
+ sysmmu_mfc_r: sysmmu@11210000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11210000 0x1000>;
interrupt-parent = <&combiner>;
@@ -923,7 +923,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_0: sysmmu@0x14640000 {
+ sysmmu_fimd1_0: sysmmu@14640000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14640000 0x1000>;
interrupt-parent = <&combiner>;
@@ -934,7 +934,7 @@
#iommu-cells = <0>;
};
- sysmmu_fimd1_1: sysmmu@0x14680000 {
+ sysmmu_fimd1_1: sysmmu@14680000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14680000 0x1000>;
interrupt-parent = <&combiner>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index d31249f25ccf..2f4f40882dab 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -23,7 +23,7 @@
stdout-path = "serial2:115200n8";
};
- firmware@02073000 {
+ firmware@2073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 3c7385cab248..46cf85f3c18b 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -30,7 +30,7 @@
compatible = "samsung,s3c2416-irq";
};
- clocks: clock-controller@0x4c000000 {
+ clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
@@ -69,7 +69,7 @@
<&clocks SCLK_UART>;
};
- uart_3: serial@5000C000 {
+ uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -80,7 +80,7 @@
status = "disabled";
};
- sdhci_1: sdhci@4AC00000 {
+ sdhci_1: sdhci@4ac00000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4AC00000 0x100>;
interrupts = <0 0 21 3>;
@@ -91,7 +91,7 @@
status = "disabled";
};
- sdhci_0: sdhci@4A800000 {
+ sdhci_0: sdhci@4a800000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0x4A800000 0x100>;
interrupts = <0 0 20 3>;
--
2.11.0
next prev parent reply other threads:[~2018-05-03 18:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 12:46 [PATCH 04/25] " Mathieu Malaterre
2017-12-18 9:40 ` Krzysztof Kozlowski
2017-12-18 10:17 ` Mathieu Malaterre
2018-05-01 16:15 ` Krzysztof Kozlowski
2018-05-02 20:11 ` [PATCH v2] " Mathieu Malaterre
2018-05-03 16:30 ` Krzysztof Kozlowski
2018-05-03 16:35 ` Krzysztof Kozlowski
2018-05-03 18:47 ` Mathieu Malaterre
2018-05-03 18:44 ` Mathieu Malaterre [this message]
2018-05-03 18:53 ` [PATCH v3] " Krzysztof Kozlowski
2018-05-03 18:58 ` Mathieu Malaterre
2018-05-03 19:01 ` Krzysztof Kozlowski
2018-05-03 19:13 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180503184454.19131-1-malat@debian.org \
--to=malat@debian.org \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--subject='Re: [PATCH v3] arm: exynos/s3c: dts: Remove leading 0x and 0s from bindings notation' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).