LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Yixun Lan <yixun.lan@amlogic.com>
To: Mark Brown <broonie@kernel.org>
Cc: Sunny Luo <sunny.luo@amlogic.com>,
	Yixun Lan <yixun.lan@amlogic.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Carlo Caione <carlo@caione.org>, <linux-spi@vger.kernel.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 2/3] spi: meson-axg: enhance output enable feature
Date: Thu, 3 May 2018 21:36:43 +0000	[thread overview]
Message-ID: <20180503213645.20694-3-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20180503213645.20694-1-yixun.lan@amlogic.com>

From: Sunny Luo <sunny.luo@amlogic.com>

The SPICC controller in Meson-AXG is capable of driving the CLK/MOSI/SS
signal lines through the idle state (between two transmission operation),
which avoid the signals floating in unexpected state.

Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
 drivers/spi/spi-meson-spicc.c | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c
index 8489f4c9f465..90b15f7d50dd 100644
--- a/drivers/spi/spi-meson-spicc.c
+++ b/drivers/spi/spi-meson-spicc.c
@@ -115,6 +115,13 @@
 
 #define SPICC_DWADDR	0x24	/* Write Address of DMA */
 
+#define SPICC_ENH_CTL0	0x38	/* Enhanced Feature */
+#define SPICC_ENH_MOSI_OEN		BIT(25)
+#define SPICC_ENH_CLK_OEN		BIT(26)
+#define SPICC_ENH_CS_OEN		BIT(27)
+#define SPICC_ENH_CLK_CS_DELAY_EN	BIT(28)
+#define SPICC_ENH_MAIN_CLK_AO		BIT(29)
+
 #define writel_bits_relaxed(mask, val, addr) \
 	writel_relaxed((readl_relaxed(addr) & ~(mask)) | (val), addr)
 
@@ -123,6 +130,7 @@
 
 struct meson_spicc_data {
 	unsigned int			max_speed_hz;
+	bool				has_oen;
 };
 
 struct meson_spicc_device {
@@ -145,6 +153,19 @@ struct meson_spicc_device {
 	bool				is_last_burst;
 };
 
+static void meson_spicc_oen_enable(struct meson_spicc_device *spicc)
+{
+	u32 conf;
+
+	if (!spicc->data->has_oen)
+		return;
+
+	conf = readl_relaxed(spicc->base + SPICC_ENH_CTL0) |
+		SPICC_ENH_MOSI_OEN | SPICC_ENH_CLK_OEN | SPICC_ENH_CS_OEN;
+
+	writel_relaxed(conf, spicc->base + SPICC_ENH_CTL0);
+}
+
 static inline bool meson_spicc_txfull(struct meson_spicc_device *spicc)
 {
 	return !!FIELD_GET(SPICC_TF,
@@ -453,6 +474,8 @@ static int meson_spicc_prepare_message(struct spi_master *master,
 
 	writel_bits_relaxed(BIT(24), BIT(24), spicc->base + SPICC_TESTREG);
 
+	meson_spicc_oen_enable(spicc);
+
 	return 0;
 }
 
@@ -605,11 +628,12 @@ static int meson_spicc_remove(struct platform_device *pdev)
 }
 
 static const struct meson_spicc_data meson_spicc_gx_data = {
-	.max_speed_hz	= 30000000,
+	.max_speed_hz		= 30000000,
 };
 
 static const struct meson_spicc_data meson_spicc_axg_data = {
-	.max_speed_hz	= 80000000,
+	.max_speed_hz		= 80000000,
+	.has_oen		= true,
 };
 
 static const struct of_device_id meson_spicc_of_match[] = {
-- 
2.17.0

  parent reply	other threads:[~2018-05-03 13:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-03 21:36 [PATCH 0/3] spi: meson-axg: add few enhanced features Yixun Lan
2018-05-03 21:36 ` [PATCH 1/3] spi: meson-axg: support MAX 80M clock Yixun Lan
2018-05-03 23:13   ` Mark Brown
2018-05-04  1:56     ` Yixun Lan
2018-05-05  0:58       ` Mark Brown
2018-05-03 21:36 ` Yixun Lan [this message]
2018-05-03 21:36 ` [PATCH 3/3] spi: meson-axg: add a linear clock divider support Yixun Lan
2018-05-03 23:16   ` Mark Brown
2018-05-04  2:07     ` Yixun Lan
2018-05-04  2:22   ` kbuild test robot
2018-05-04  2:46   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180503213645.20694-3-yixun.lan@amlogic.com \
    --to=yixun.lan@amlogic.com \
    --cc=broonie@kernel.org \
    --cc=carlo@caione.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=sunny.luo@amlogic.com \
    --subject='Re: [PATCH 2/3] spi: meson-axg: enhance output enable feature' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).