From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752323AbeEGMa5 (ORCPT ); Mon, 7 May 2018 08:30:57 -0400 Received: from hermes.aosc.io ([199.195.250.187]:43631 "EHLO hermes.aosc.io" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751968AbeEGMa4 (ORCPT ); Mon, 7 May 2018 08:30:56 -0400 From: Icenowy Zheng To: Mark Brown , Liam Girdwood , Maxime Ripard , Chen-Yu Tsai Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@googlegroups.com, Icenowy Zheng Subject: [PATCH v4 0/3] SY8106A regulator support and enable it on Orange Pi PC Date: Mon, 7 May 2018 20:29:39 +0800 Message-Id: <20180507122942.25758-1-icenowy@aosc.io> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patchset adds dt-bindings and driver for Silergy SY8106A, and then utilize it on the Orange Pi PC board, which uses SY8016A as its CPUX (main ARM CPU cluster in an Allwinner SoC) power supply. The driver's functionality is restricted now, mainly {en,dis}able function is not yet implemented, as it cannot be debugged on Orange Pi PC (disable it will kill Linux). Ondrej Jirman (3): dt-bindings: add binding for the SY8106A voltage regulator regulator: add support for SY8106A regulator ARM: dts: sun8i: h3: Add SY8106A regulator to Orange Pi PC .../bindings/regulator/sy8106a-regulator.txt | 23 +++ MAINTAINERS | 6 + arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 28 +++ drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 2 +- drivers/regulator/sy8106a-regulator.c | 168 ++++++++++++++++++ 6 files changed, 233 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt create mode 100644 drivers/regulator/sy8106a-regulator.c -- 2.17.0