LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Felipe Balbi <balbi@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 2/5] dt-bindings: usb: add binding for the DWC3 controller on Allwinner SoC
Date: Mon,  7 May 2018 23:18:14 +0800	[thread overview]
Message-ID: <20180507151817.55663-3-icenowy@aosc.io> (raw)
In-Reply-To: <20180507151817.55663-1-icenowy@aosc.io>

The Allwinner H6 SoC uses DWC3 controller for USB3.

Add its device tree binding document.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 .../bindings/usb/allwinner,dwc3.txt           | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/allwinner,dwc3.txt

diff --git a/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt b/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt
new file mode 100644
index 000000000000..3f7714636785
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/allwinner,dwc3.txt
@@ -0,0 +1,39 @@
+Allwinner SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	should contain "allwinner,sun50i-h6-dwc3" for H6 SoC
+- clocks:	A list of phandle + clock-specifier pairs for the
+		clocks listed in clock-names
+- clock-names:	Should contain the following:
+  "bus"		The bus clock of the DWC3 part
+- resets:	A list of phandle + reset-specifier pairs for the
+		resets listed in reset-names
+- reset-names:	Should contain the following:
+  "bus"		The bus reset of the DWC3 part
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
+
+Example device nodes:
+	usb3: usb@5200000 {
+		compatible = "allwinner,sun50i-h6-dwc3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clocks = <&ccu CLK_BUS_XHCI>;
+		clock-names = "bus";
+		resets = <&ccu RST_BUS_XHCI>;
+		reset-names = "bus";
+
+		dwc3: dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x5200000 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3phy>;
+			phy-names = "usb3-phy";
+		};
+	};
-- 
2.17.0


  parent reply	other threads:[~2018-05-07 15:23 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-07 15:18 [PATCH 0/5] Allwinner H6 USB3 support Icenowy Zheng
2018-05-07 15:18 ` [PATCH 1/5] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC Icenowy Zheng
2018-05-22 20:12   ` Rob Herring
2018-05-07 15:18 ` Icenowy Zheng [this message]
2018-05-07 15:18 ` [PATCH 3/5] usb: dwc3: of-simple: Add compatible for Allwinner H6 platform Icenowy Zheng
2018-05-07 15:18 ` [PATCH 4/5] arm64: allwinner: h6: add USB3 device nodes Icenowy Zheng
2018-05-08  8:31   ` Sergei Shtylyov
2018-05-22 20:09     ` Rob Herring
2018-05-07 15:18 ` [PATCH 5/5] arm64: allwinner: h6: enable USB3 port on Pine H64 Icenowy Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180507151817.55663-3-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --subject='Re: [PATCH 2/5] dt-bindings: usb: add binding for the DWC3 controller on Allwinner SoC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).