LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC
@ 2018-03-05 10:25 Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel
                   ` (7 more replies)
  0 siblings, 8 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

This patch series is providing power off support for Freescale/NXP iMX6 based
boards with external power management integrated circuit (PMIC).
As a first step the PMIC is configured to turn off the system if the
standby pin is asserted. On second step we assert the standby pin.
For this reason we need to use pm_power_off_prepare.

Usage of stnadby pin for power off is described in official iMX6
documentation.

2018.03.05:
As this patch set touches multiple subsystems I think it would make
sense for Shawn Guo to take the all patch set.
The only part which didn't receive an ACK is regulator stuff. So I would
hope that Mark Brown can ACK it.

Kind regards,
Oleksij Rempel

2017.12.06:
Adding Linus. Probably there is no maintainer for this patch set.
No changes are made, tested on v4.15-rc1.

2017.10.27:
Last version of this patch set was send at 20 Jun 2017, this is a rebase against
kernel v4.14-rc6. Probably this set got lost. If I forgot to address some comments,
please point me.

changes:
v6:
 - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
 - fix "MPIC_STBY_REQ" typo in the comment.

v5:
 - remove useless includes from pm-imx6.c patch
 - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
   patch

v4:
 - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
   patch
 - add Acked-by to "ARM: imx6q: provide documentation for new ..."
   patch

v3:
 - set pm_power_off_prepare = NULL on .remove.
 - documentation and spelling fixes.
 - use %pf instead of lookup_symbol_name.


Oleksij Rempel (6):
  ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
    property
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
    is set
  kernel/reboot.c: export pm_power_off_prepare
  regulator: pfuze100: add fsl,pmic-stby-poweroff property
  regulator: pfuze100-regulator: provide pm_power_off_prepare handler
  ARM: dts: imx6: RIoTboard provide standby on power off option

 .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
 .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
 arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
 arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
 drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
 kernel/reboot.c                                    |  1 +
 6 files changed, 138 insertions(+)

-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index a45ca67a9d5f..e1308346e00d 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
 - interrupts: Should contain CCM interrupt
 - #clock-cells: Should be <1>
 
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+  on power off.
+  Use this property if the SoC should be powered off by external power
+  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+  be using "syscon-poweroff" driver instead.
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
 for the full list of i.MX6 Quad and DualLite clock IDs.
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-05-08 12:40   ` Russell King - ARM Linux
  2018-03-05 10:25 ` [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
                   ` (5 subsequent siblings)
  7 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index ecdf071653d4..24689260a2a5 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -620,6 +642,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-05-04 18:50   ` Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
                   ` (4 subsequent siblings)
  7 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index e4ced883d8de..350be6baa60d 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
                   ` (2 preceding siblings ...)
  2018-03-05 10:25 ` [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index c6dd3f5e485b..91fec1a0785d 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
                   ` (3 preceding siblings ...)
  2018-03-05 10:25 ` [PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-03-05 10:25 ` [PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC
about state changes. In this case internal state of PMIC must be
preconfigured for upcomming state change.
It works fine with the current regulator framework, except with the
power-off case.

This patch is providing an optional pm_power_off_prepare handler
which will configure standby state of the PMIC to disable all power lines.

In my power consumption test on RIoTBoard, I got the following results:
power off without this patch:	320 mA
power off with this patch:	2   mA
suspend to ram:			40  mA

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 63922a2167e5..f6c276ed91d8 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/pfuze100.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/kallsyms.h>
 #include <linux/regmap.h>
 
 #define PFUZE_NUMREGS		128
@@ -42,11 +43,17 @@
 
 #define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
 #define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
 #define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
 #define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
 #define PFUZE100_SWBSTCON1	0x66
 #define PFUZE100_VREFDDRCON	0x6a
 #define PFUZE100_VSNVSVOL	0x6b
@@ -57,6 +64,13 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
 
 struct pfuze_regulator {
@@ -489,6 +503,69 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
+static struct pfuze_chip *syspm_pfuze_chip;
+
+static void pfuze_power_off_prepare(void)
+{
+	dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+}
+
+static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
+{
+	if (pfuze_chip->chip_id != PFUZE100) {
+		dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
+		return -ENODEV;
+	}
+
+	if (pm_power_off_prepare) {
+		dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
+		return -EBUSY;
+	}
+
+	if (syspm_pfuze_chip) {
+		dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
+		return -EBUSY;
+	}
+
+	syspm_pfuze_chip = pfuze_chip;
+	pm_power_off_prepare = pfuze_power_off_prepare;
+
+	return 0;
+}
+
 static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 {
 	unsigned int value;
@@ -659,6 +736,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		}
 	}
 
+	if (of_property_read_bool(client->dev.of_node,
+				  "fsl,pmic-stby-poweroff"))
+		return pfuze_power_off_prepare_init(pfuze_chip);
+
+	return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+	if (syspm_pfuze_chip) {
+		syspm_pfuze_chip = NULL;
+		pm_power_off_prepare = NULL;
+	}
+
 	return 0;
 }
 
@@ -669,6 +760,7 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
+	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
                   ` (4 preceding siblings ...)
  2018-03-05 10:25 ` [PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
@ 2018-03-05 10:25 ` Oleksij Rempel
  2018-04-03  5:59 ` [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
  2018-04-09 11:37 ` Shawn Guo
  7 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-03-05 10:25 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 23e108204e1e..c507532baed3 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -170,6 +174,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
-- 
2.16.1

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
                   ` (5 preceding siblings ...)
  2018-03-05 10:25 ` [PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
@ 2018-04-03  5:59 ` Oleksij Rempel
  2018-04-09 11:37 ` Shawn Guo
  7 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-04-03  5:59 UTC (permalink / raw)
  To: Shawn Guo, Mark Brown
  Cc: kernel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	Andrew Morton, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King


[-- Attachment #1.1: Type: text/plain, Size: 2705 bytes --]

ping,

this week is a merge window. Any chance to get it in to 4.17?

On 05.03.2018 11:25, Oleksij Rempel wrote:
> This patch series is providing power off support for Freescale/NXP iMX6 based
> boards with external power management integrated circuit (PMIC).
> As a first step the PMIC is configured to turn off the system if the
> standby pin is asserted. On second step we assert the standby pin.
> For this reason we need to use pm_power_off_prepare.
> 
> Usage of stnadby pin for power off is described in official iMX6
> documentation.
> 
> 2018.03.05:
> As this patch set touches multiple subsystems I think it would make
> sense for Shawn Guo to take the all patch set.
> The only part which didn't receive an ACK is regulator stuff. So I would
> hope that Mark Brown can ACK it.
> 
> Kind regards,
> Oleksij Rempel
> 
> 2017.12.06:
> Adding Linus. Probably there is no maintainer for this patch set.
> No changes are made, tested on v4.15-rc1.
> 
> 2017.10.27:
> Last version of this patch set was send at 20 Jun 2017, this is a rebase against
> kernel v4.14-rc6. Probably this set got lost. If I forgot to address some comments,
> please point me.
> 
> changes:
> v6:
>  - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
>  - fix "MPIC_STBY_REQ" typo in the comment.
> 
> v5:
>  - remove useless includes from pm-imx6.c patch
>  - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
>    patch
> 
> v4:
>  - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
>    patch
>  - add Acked-by to "ARM: imx6q: provide documentation for new ..."
>    patch
> 
> v3:
>  - set pm_power_off_prepare = NULL on .remove.
>  - documentation and spelling fixes.
>  - use %pf instead of lookup_symbol_name.
> 
> 
> Oleksij Rempel (6):
>   ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
>     property
>   ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
>     is set
>   kernel/reboot.c: export pm_power_off_prepare
>   regulator: pfuze100: add fsl,pmic-stby-poweroff property
>   regulator: pfuze100-regulator: provide pm_power_off_prepare handler
>   ARM: dts: imx6: RIoTboard provide standby on power off option
> 
>  .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
>  .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
>  arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
>  arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
>  drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
>  kernel/reboot.c                                    |  1 +
>  6 files changed, 138 insertions(+)
> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC
  2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
                   ` (6 preceding siblings ...)
  2018-04-03  5:59 ` [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
@ 2018-04-09 11:37 ` Shawn Guo
  2018-04-09 11:40   ` Mark Brown
  7 siblings, 1 reply; 25+ messages in thread
From: Shawn Guo @ 2018-04-09 11:37 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Mark Brown, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

On Mon, Mar 05, 2018 at 11:25:17AM +0100, Oleksij Rempel wrote:
> This patch series is providing power off support for Freescale/NXP iMX6 based
> boards with external power management integrated circuit (PMIC).
> As a first step the PMIC is configured to turn off the system if the
> standby pin is asserted. On second step we assert the standby pin.
> For this reason we need to use pm_power_off_prepare.
> 
> Usage of stnadby pin for power off is described in official iMX6
> documentation.
> 
> 2018.03.05:
> As this patch set touches multiple subsystems I think it would make
> sense for Shawn Guo to take the all patch set.
> The only part which didn't receive an ACK is regulator stuff. So I would
> hope that Mark Brown can ACK it.

Besides regulator changes, I did not see an ACK on kernel/reboot.c
either.

Shawn

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC
  2018-04-09 11:37 ` Shawn Guo
@ 2018-04-09 11:40   ` Mark Brown
  2018-04-09 11:43     ` Oleksij Rempel
  0 siblings, 1 reply; 25+ messages in thread
From: Mark Brown @ 2018-04-09 11:40 UTC (permalink / raw)
  To: Shawn Guo
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Leonard Crestez,
	Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Fabio Estevam, Russell King

[-- Attachment #1: Type: text/plain, Size: 480 bytes --]

On Mon, Apr 09, 2018 at 07:37:45PM +0800, Shawn Guo wrote:
> On Mon, Mar 05, 2018 at 11:25:17AM +0100, Oleksij Rempel wrote:

> > As this patch set touches multiple subsystems I think it would make
> > sense for Shawn Guo to take the all patch set.
> > The only part which didn't receive an ACK is regulator stuff. So I would
> > hope that Mark Brown can ACK it.

> Besides regulator changes, I did not see an ACK on kernel/reboot.c
> either.

Right, that's the big blocker here.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC
  2018-04-09 11:40   ` Mark Brown
@ 2018-04-09 11:43     ` Oleksij Rempel
  0 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-04-09 11:43 UTC (permalink / raw)
  To: Mark Brown, Shawn Guo
  Cc: kernel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	Andrew Morton, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King


[-- Attachment #1.1: Type: text/plain, Size: 577 bytes --]

On 09.04.2018 13:40, Mark Brown wrote:
> On Mon, Apr 09, 2018 at 07:37:45PM +0800, Shawn Guo wrote:
>> On Mon, Mar 05, 2018 at 11:25:17AM +0100, Oleksij Rempel wrote:
> 
>>> As this patch set touches multiple subsystems I think it would make
>>> sense for Shawn Guo to take the all patch set.
>>> The only part which didn't receive an ACK is regulator stuff. So I would
>>> hope that Mark Brown can ACK it.
> 
>> Besides regulator changes, I did not see an ACK on kernel/reboot.c
>> either.
> 
> Right, that's the big blocker here.
> 

Ok, Who should ACK it?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-03-05 10:25 ` [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
@ 2018-05-04 18:50   ` Oleksij Rempel
  2018-05-04 20:49     ` Andrew Morton
  2018-05-12 11:13     ` Rafael J. Wysocki
  0 siblings, 2 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-04 18:50 UTC (permalink / raw)
  To: Andrew Morton
  Cc: kernel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	Liam Girdwood, Leonard Crestez, Rob Herring, Mark Rutland,
	Michael Turquette, Stephen Boyd, Fabio Estevam, Russell King,
	Shawn Guo, Mark Brown

[-- Attachment #1: Type: text/plain, Size: 1351 bytes --]

Hallo Andrew,
I need your ACK or NACK for this patch.

This function is used to configure external PMIC to interpret
signal which will be triggered by pm_power_off as power off.
Since same signal can be used for stand by, I linked PMIC configuration
with pm_power_off_prepare to avoid possible conflicts.

On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> Export pm_power_off_prepare. It is needed to implement power off on
> Freescale/NXP iMX6 based boards with external power management
> integrated circuit (PMIC).
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  kernel/reboot.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index e4ced883d8de..350be6baa60d 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -49,6 +49,7 @@ int reboot_force;
>   */
>  
>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);
>  
>  /**
>   *	emergency_restart - reboot the system
> -- 
> 2.16.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-04 18:50   ` Oleksij Rempel
@ 2018-05-04 20:49     ` Andrew Morton
  2018-05-05  7:01       ` Oleksij Rempel
  2018-05-12 11:13     ` Rafael J. Wysocki
  1 sibling, 1 reply; 25+ messages in thread
From: Andrew Morton @ 2018-05-04 20:49 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: kernel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	Liam Girdwood, Leonard Crestez, Rob Herring, Mark Rutland,
	Michael Turquette, Stephen Boyd, Fabio Estevam, Russell King,
	Shawn Guo, Mark Brown, Rafael J . Wysocki

On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:

> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> ...
>
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);
> >  

OK by me, but it's more of a Rafael thing.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-04 20:49     ` Andrew Morton
@ 2018-05-05  7:01       ` Oleksij Rempel
  2018-05-08 21:39         ` Rafael J. Wysocki
  0 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-05  7:01 UTC (permalink / raw)
  To: Andrew Morton, Rafael J . Wysocki
  Cc: kernel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	Liam Girdwood, Leonard Crestez, Rob Herring, Mark Rutland,
	Michael Turquette, Stephen Boyd, Fabio Estevam, Russell King,
	Shawn Guo, Mark Brown

[-- Attachment #1: Type: text/plain, Size: 1214 bytes --]

Moving Rafael from Cc to To.

Hi Rafael,

can you please help here?
I need your ACK or NACK for this patch.

On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
> 
> > Hallo Andrew,
> > I need your ACK or NACK for this patch.
> > 
> > This function is used to configure external PMIC to interpret
> > signal which will be triggered by pm_power_off as power off.
> > Since same signal can be used for stand by, I linked PMIC configuration
> > with pm_power_off_prepare to avoid possible conflicts.
> > 
> > ...
> >
> > > --- a/kernel/reboot.c
> > > +++ b/kernel/reboot.c
> > > @@ -49,6 +49,7 @@ int reboot_force;
> > >   */
> > >  
> > >  void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > >  
> 
> OK by me, but it's more of a Rafael thing.
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2018-03-05 10:25 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
@ 2018-05-08 12:40   ` Russell King - ARM Linux
  2018-05-09  5:06     ` Oleksij Rempel
  0 siblings, 1 reply; 25+ messages in thread
From: Russell King - ARM Linux @ 2018-05-08 12:40 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Shawn Guo, Mark Brown, kernel, devicetree, linux-arm-kernel,
	linux-clk, linux-kernel, Andrew Morton, Liam Girdwood,
	Leonard Crestez, Rob Herring, Mark Rutland, Michael Turquette,
	Stephen Boyd, Fabio Estevam

On Mon, Mar 05, 2018 at 11:25:19AM +0100, Oleksij Rempel wrote:
> One of the Freescale recommended sequences for power off with external
> PMIC is the following:
> ...
> 3.  SoC is programming PMIC for power off when standby is asserted.
> 4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
> 
> See:
> http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
> page 5083
> 
> This patch implements step 4. of this sequence.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
> index ecdf071653d4..24689260a2a5 100644
> --- a/arch/arm/mach-imx/pm-imx6.c
> +++ b/arch/arm/mach-imx/pm-imx6.c
> @@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
>  				   IMX6Q_GPR1_GINT);
>  }
>  
> +static void imx6_pm_stby_poweroff(void)
> +{
> +	imx6_set_lpm(STOP_POWER_OFF);
> +	cpu_suspend(0, imx6q_suspend_finish);

Do you actually need to save the processor state etc here - the request
is after all to power down the system and not to suspend.  Would calling
imx6q_suspend_finish() directly work (and hence simplify the code) ?

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-05  7:01       ` Oleksij Rempel
@ 2018-05-08 21:39         ` Rafael J. Wysocki
  0 siblings, 0 replies; 25+ messages in thread
From: Rafael J. Wysocki @ 2018-05-08 21:39 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Andrew Morton, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King, Shawn Guo, Mark Brown

On 5/5/2018 9:01 AM, Oleksij Rempel wrote:
> Moving Rafael from Cc to To.
>
> Hi Rafael,
>
> can you please help here?
> I need your ACK or NACK for this patch.

Sorry for the delay, I'll have a closer look at it in the next couple of 
days.

Thanks,
Rafael


> On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
>> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
>>
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> ...
>>>
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>    */
>>>>   
>>>>   void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>>   
>> OK by me, but it's more of a Rafael thing.
>>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2018-05-08 12:40   ` Russell King - ARM Linux
@ 2018-05-09  5:06     ` Oleksij Rempel
  2018-05-09  9:02       ` Russell King - ARM Linux
  0 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-09  5:06 UTC (permalink / raw)
  To: Russell King - ARM Linux
  Cc: Mark Rutland, devicetree, Michael Turquette, Stephen Boyd,
	linux-kernel, Rob Herring, Liam Girdwood, Mark Brown, kernel,
	Fabio Estevam, Andrew Morton, Leonard Crestez, Shawn Guo,
	linux-clk, linux-arm-kernel

[-- Attachment #1: Type: text/plain, Size: 1950 bytes --]

On Tue, May 08, 2018 at 01:40:33PM +0100, Russell King - ARM Linux wrote:
> On Mon, Mar 05, 2018 at 11:25:19AM +0100, Oleksij Rempel wrote:
> > One of the Freescale recommended sequences for power off with external
> > PMIC is the following:
> > ...
> > 3.  SoC is programming PMIC for power off when standby is asserted.
> > 4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
> > 
> > See:
> > http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
> > page 5083
> > 
> > This patch implements step 4. of this sequence.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> > 
> > diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
> > index ecdf071653d4..24689260a2a5 100644
> > --- a/arch/arm/mach-imx/pm-imx6.c
> > +++ b/arch/arm/mach-imx/pm-imx6.c
> > @@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
> >  				   IMX6Q_GPR1_GINT);
> >  }
> >  
> > +static void imx6_pm_stby_poweroff(void)
> > +{
> > +	imx6_set_lpm(STOP_POWER_OFF);
> > +	cpu_suspend(0, imx6q_suspend_finish);
> 
> Do you actually need to save the processor state etc here - the request
> is after all to power down the system and not to suspend.  Would calling
> imx6q_suspend_finish() directly work (and hence simplify the code) ?

yes you right. This will work as well.
I'll send changed version after Rafaels feedback for kernel/reboot.c
part.
Russell, can I expect your Signed-off-by for changed patch?

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2018-05-09  5:06     ` Oleksij Rempel
@ 2018-05-09  9:02       ` Russell King - ARM Linux
  0 siblings, 0 replies; 25+ messages in thread
From: Russell King - ARM Linux @ 2018-05-09  9:02 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Mark Rutland, devicetree, Michael Turquette, Stephen Boyd,
	linux-kernel, Liam Girdwood, Rob Herring, Mark Brown, kernel,
	Fabio Estevam, Andrew Morton, Leonard Crestez, Shawn Guo,
	linux-clk, linux-arm-kernel

On Wed, May 09, 2018 at 07:06:28AM +0200, Oleksij Rempel wrote:
> On Tue, May 08, 2018 at 01:40:33PM +0100, Russell King - ARM Linux wrote:
> > On Mon, Mar 05, 2018 at 11:25:19AM +0100, Oleksij Rempel wrote:
> > > One of the Freescale recommended sequences for power off with external
> > > PMIC is the following:
> > > ...
> > > 3.  SoC is programming PMIC for power off when standby is asserted.
> > > 4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.
> > > 
> > > See:
> > > http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
> > > page 5083
> > > 
> > > This patch implements step 4. of this sequence.
> > > 
> > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > > ---
> > >  arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
> > >  1 file changed, 25 insertions(+)
> > > 
> > > diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
> > > index ecdf071653d4..24689260a2a5 100644
> > > --- a/arch/arm/mach-imx/pm-imx6.c
> > > +++ b/arch/arm/mach-imx/pm-imx6.c
> > > @@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
> > >  				   IMX6Q_GPR1_GINT);
> > >  }
> > >  
> > > +static void imx6_pm_stby_poweroff(void)
> > > +{
> > > +	imx6_set_lpm(STOP_POWER_OFF);
> > > +	cpu_suspend(0, imx6q_suspend_finish);
> > 
> > Do you actually need to save the processor state etc here - the request
> > is after all to power down the system and not to suspend.  Would calling
> > imx6q_suspend_finish() directly work (and hence simplify the code) ?
> 
> yes you right. This will work as well.
> I'll send changed version after Rafaels feedback for kernel/reboot.c
> part.
> Russell, can I expect your Signed-off-by for changed patch?

No, please read Documentation/process/submitting-patches.rst section 12.
s-o-b does not apply in this case.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-04 18:50   ` Oleksij Rempel
  2018-05-04 20:49     ` Andrew Morton
@ 2018-05-12 11:13     ` Rafael J. Wysocki
  2018-05-14  4:33       ` Oleksij Rempel
  1 sibling, 1 reply; 25+ messages in thread
From: Rafael J. Wysocki @ 2018-05-12 11:13 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Andrew Morton, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King, Shawn Guo, Mark Brown

On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> > Export pm_power_off_prepare. It is needed to implement power off on
> > Freescale/NXP iMX6 based boards with external power management
> > integrated circuit (PMIC).
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  kernel/reboot.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/kernel/reboot.c b/kernel/reboot.c
> > index e4ced883d8de..350be6baa60d 100644
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);

Why not EXPORT_SYMBOL_GPL() ?

> >  
> >  /**
> >   *	emergency_restart - reboot the system
> 
> 

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-12 11:13     ` Rafael J. Wysocki
@ 2018-05-14  4:33       ` Oleksij Rempel
  2018-05-14  5:10         ` Oleksij Rempel
  0 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-14  4:33 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Andrew Morton, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King, Shawn Guo, Mark Brown


[-- Attachment #1.1: Type: text/plain, Size: 1220 bytes --]



On 12.05.2018 13:13, Rafael J. Wysocki wrote:
> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>> Hallo Andrew,
>> I need your ACK or NACK for this patch.
>>
>> This function is used to configure external PMIC to interpret
>> signal which will be triggered by pm_power_off as power off.
>> Since same signal can be used for stand by, I linked PMIC configuration
>> with pm_power_off_prepare to avoid possible conflicts.
>>
>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>> Export pm_power_off_prepare. It is needed to implement power off on
>>> Freescale/NXP iMX6 based boards with external power management
>>> integrated circuit (PMIC).
>>>
>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>> ---
>>>  kernel/reboot.c | 1 +
>>>  1 file changed, 1 insertion(+)
>>>
>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>> index e4ced883d8de..350be6baa60d 100644
>>> --- a/kernel/reboot.c
>>> +++ b/kernel/reboot.c
>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>   */
>>>  
>>>  void (*pm_power_off_prepare)(void);
>>> +EXPORT_SYMBOL(pm_power_off_prepare);
> 
> Why not EXPORT_SYMBOL_GPL() ?

No special reason. Fixed.
Any other comments?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-14  4:33       ` Oleksij Rempel
@ 2018-05-14  5:10         ` Oleksij Rempel
  2018-05-14 10:12           ` Oleksij Rempel
  0 siblings, 1 reply; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-14  5:10 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Andrew Morton, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King, Shawn Guo, Mark Brown


[-- Attachment #1.1: Type: text/plain, Size: 1397 bytes --]



On 14.05.2018 06:33, Oleksij Rempel wrote:
> 
> 
> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>> Freescale/NXP iMX6 based boards with external power management
>>>> integrated circuit (PMIC).
>>>>
>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>> ---
>>>>  kernel/reboot.c | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>> index e4ced883d8de..350be6baa60d 100644
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>   */
>>>>  
>>>>  void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>
>> Why not EXPORT_SYMBOL_GPL() ?
> 
> No special reason. Fixed.
> Any other comments?
> 

Or with other words, will it be enough to get your Signed-of-by for this
patch?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare
  2018-05-14  5:10         ` Oleksij Rempel
@ 2018-05-14 10:12           ` Oleksij Rempel
  0 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2018-05-14 10:12 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Andrew Morton, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Liam Girdwood, Leonard Crestez, Rob Herring,
	Mark Rutland, Michael Turquette, Stephen Boyd, Fabio Estevam,
	Russell King, Shawn Guo, Mark Brown


[-- Attachment #1.1: Type: text/plain, Size: 1644 bytes --]



On 14.05.2018 07:10, Oleksij Rempel wrote:
> 
> 
> On 14.05.2018 06:33, Oleksij Rempel wrote:
>>
>>
>> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>>> Hallo Andrew,
>>>> I need your ACK or NACK for this patch.
>>>>
>>>> This function is used to configure external PMIC to interpret
>>>> signal which will be triggered by pm_power_off as power off.
>>>> Since same signal can be used for stand by, I linked PMIC configuration
>>>> with pm_power_off_prepare to avoid possible conflicts.
>>>>
>>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>>> Freescale/NXP iMX6 based boards with external power management
>>>>> integrated circuit (PMIC).
>>>>>
>>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>>> ---
>>>>>  kernel/reboot.c | 1 +
>>>>>  1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>>> index e4ced883d8de..350be6baa60d 100644
>>>>> --- a/kernel/reboot.c
>>>>> +++ b/kernel/reboot.c
>>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>>   */
>>>>>  
>>>>>  void (*pm_power_off_prepare)(void);
>>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>
>>> Why not EXPORT_SYMBOL_GPL() ?
>>
>> No special reason. Fixed.
>> Any other comments?
>>
> 
> Or with other words, will it be enough to get your Signed-of-by for this
> patch?

Hi again,

i was punished by my colleagues and actually by Russel for asking
"Signed-of-by". So, I correct my self, is it enough for a Reviewed-by?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2017-12-06  7:23 Oleksij Rempel
@ 2017-12-06  7:23 ` Oleksij Rempel
  0 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2017-12-06  7:23 UTC (permalink / raw)
  To: Linus Torvalds, Rob Herring, Mark Rutland, Michael Turquette,
	Stephen Boyd, Shawn Guo, Fabio Estevam, Russell King
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Mark Brown,
	Leonard Crestez

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index ecdf071653d4..24689260a2a5 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -620,6 +642,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.11.0

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2017-10-27  9:48 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
@ 2017-10-27  9:48 ` Oleksij Rempel
  0 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2017-10-27  9:48 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
	Shawn Guo, Fabio Estevam, Russell King
  Cc: Oleksij Rempel, kernel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, Andrew Morton, Liam Girdwood, Mark Brown,
	Leonard Crestez

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index ecdf071653d4..24689260a2a5 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -604,6 +604,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -620,6 +642,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.11.0

^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set
  2017-06-20 14:09 [PATCH v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
@ 2017-06-20 14:09 ` Oleksij Rempel
  0 siblings, 0 replies; 25+ messages in thread
From: Oleksij Rempel @ 2017-06-20 14:09 UTC (permalink / raw)
  To: Andrew Morton, devicetree, Fabio Estevam, kernel, Liam Girdwood,
	linux-arm-kernel, linux-clk, linux-kernel, Mark Brown,
	Mark Rutland, Michael Turquette, Rob Herring, Russell King,
	Shawn Guo, Stephen Boyd, Leonard Crestez
  Cc: Oleksij Rempel

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index e61b1d1027e1..0f141caa71f6 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -602,6 +602,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -618,6 +640,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.11.0

^ permalink raw reply	[flat|nested] 25+ messages in thread

end of thread, other threads:[~2018-05-14 10:12 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-05 10:25 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2018-03-05 10:25 ` [PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property Oleksij Rempel
2018-03-05 10:25 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
2018-05-08 12:40   ` Russell King - ARM Linux
2018-05-09  5:06     ` Oleksij Rempel
2018-05-09  9:02       ` Russell King - ARM Linux
2018-03-05 10:25 ` [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare Oleksij Rempel
2018-05-04 18:50   ` Oleksij Rempel
2018-05-04 20:49     ` Andrew Morton
2018-05-05  7:01       ` Oleksij Rempel
2018-05-08 21:39         ` Rafael J. Wysocki
2018-05-12 11:13     ` Rafael J. Wysocki
2018-05-14  4:33       ` Oleksij Rempel
2018-05-14  5:10         ` Oleksij Rempel
2018-05-14 10:12           ` Oleksij Rempel
2018-03-05 10:25 ` [PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property Oleksij Rempel
2018-03-05 10:25 ` [PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler Oleksij Rempel
2018-03-05 10:25 ` [PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Oleksij Rempel
2018-04-03  5:59 ` [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2018-04-09 11:37 ` Shawn Guo
2018-04-09 11:40   ` Mark Brown
2018-04-09 11:43     ` Oleksij Rempel
  -- strict thread matches above, loose matches on Subject: below --
2017-12-06  7:23 Oleksij Rempel
2017-12-06  7:23 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
2017-10-27  9:48 [PATCH RESEND v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2017-10-27  9:48 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel
2017-06-20 14:09 [PATCH v6 0/6] provide power off support for iMX6 with external PMIC Oleksij Rempel
2017-06-20 14:09 ` [PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).