Incoming sms problem on Motorola Droid 4

Incoming sms problem on Motorola Droid 4

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 917 bytes --]

Hi!

I have problems with incoming SMS. ofono tries to use +CNMI=1,2,2,1,0

> AT+CNMI=?
< +CNMI: (0,1,2),(0,1,2,3),(0,2),(0,1,2),(0,1)
< OK
ofonod[3070]: drivers/atmodem/sms.c:build_cnmi_string()
ofonod[3070]: drivers/atmodem/sms.c:construct_ack_pdu()
> AT+CNMI=1,2,2,1,0
< OK
ofonod[3070]: src/network.c:__ofono_netreg_add_status_watch() 0x5bbbf0

... unfortunately, with that configuration no messages are comming to
ofono and the other phone sees them as "delievery failed".

I had some luck with unicsy_demo using AT+CNMI=1,2 with text mode (not
PDU) messages. That works well enough for me.

Unfortunately, if I force ofono to pass "AT+CNMI=1,2", it does not
work well, either.

Any ideas how to debug this / what to try?

Thanks,

								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: Incoming sms problem on Motorola Droid 4

[Tony Lindgren]

* Pavel Machek <pavel@ucw.cz> [180508 21:53]:
> Hi!
> 
> I have problems with incoming SMS. ofono tries to use +CNMI=1,2,2,1,0
> 
> > AT+CNMI=?
> < +CNMI: (0,1,2),(0,1,2,3),(0,2),(0,1,2),(0,1)
> < OK
> ofonod[3070]: drivers/atmodem/sms.c:build_cnmi_string()
> ofonod[3070]: drivers/atmodem/sms.c:construct_ack_pdu()
> > AT+CNMI=1,2,2,1,0
> < OK
> ofonod[3070]: src/network.c:__ofono_netreg_add_status_watch() 0x5bbbf0
> 
> ... unfortunately, with that configuration no messages are comming to
> ofono and the other phone sees them as "delievery failed".
> 
> I had some luck with unicsy_demo using AT+CNMI=1,2 with text mode (not
> PDU) messages. That works well enough for me.
> 
> Unfortunately, if I force ofono to pass "AT+CNMI=1,2", it does not
> work well, either.
> 
> Any ideas how to debug this / what to try?

Well you can try to see what Android is doing for SMS with:

# echo 0x7fffffff > /sys/module/ts27010mux/parameters/debug_level
# dmesg | grep ts27010 | grep AT

To send SMS, looks like Android RIL first does:

2 AT+CMGS=327 where 327 seems to be the size of the whatever
encoded message. Then the next packet to dlci 2 contains the
encoded message that is of size 327.

When receiving, mdm6600 sends these on dlci 1:
~+WAKEUP
~+WAKEUP
~+WAKEUP

Then mdm6600 sends this on dlci 9:
~+CMT=372

And that's probably the incoming SMS size. But I don't see
anything for what actually reads the incoming SMS.

Regards,

Tony