LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Thierry Reding <thierry.reding@gmail.com>, David Airlie <airlied@linux.ie>, Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Lukasz Majewski <lukma@denx.de> Subject: [PATCH RESEND] display: panel: Add KOE tx14d24vm1bpa display support (320x240) Date: Wed, 9 May 2018 17:43:38 +0200 [thread overview] Message-ID: <20180509154338.2841-1-lukma@denx.de> (raw) In-Reply-To: <20180412143715.6828-1-lukma@denx.de> This commit adds support for KOE's 5.7" display. Signed-off-by: Lukasz Majewski <lukma@denx.de> --- .../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 ++++++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt diff --git a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt new file mode 100644 index 000000000000..be7ac666807b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel + +Required properties: +- compatible: should be "koe,tx14d24vm1bpa" +- backlight: phandle of the backlight device attached to the panel +- power-supply: single regulator to provide the supply voltage + +Required nodes: +- port: Parallel port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX53 based board + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + +Then one needs to extend the dispX node: + + lcd_display: disp1 { + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index d9984bdb5bb5..103b43ce7dee 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1268,6 +1268,29 @@ static const struct panel_desc innolux_zj070na_01p = { }, }; +static const struct display_timing koe_tx14d24vm1bpa_timing = { + .pixelclock = { 5580000, 5850000, 6200000 }, + .hactive = { 320, 320, 320 }, + .hfront_porch = { 30, 30, 30 }, + .hback_porch = { 30, 30, 30 }, + .hsync_len = { 1, 5, 17 }, + .vactive = { 240, 240, 240 }, + .vfront_porch = { 6, 6, 6 }, + .vback_porch = { 5, 5, 5 }, + .vsync_len = { 1, 2, 11 }, + .flags = DISPLAY_FLAGS_DE_HIGH, +}; + +static const struct panel_desc koe_tx14d24vm1bpa = { + .timings = &koe_tx14d24vm1bpa_timing, + .num_timings = 1, + .bpc = 6, + .size = { + .width = 115, + .height = 86, + }, +}; + static const struct display_timing koe_tx31d200vm0baa_timing = { .pixelclock = { 39600000, 43200000, 48000000 }, .hactive = { 1280, 1280, 1280 }, @@ -2204,6 +2227,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "innolux,zj070na-01p", .data = &innolux_zj070na_01p, }, { + .compatible = "koe,tx14d24vm1bpa", + .data = &koe_tx14d24vm1bpa, + }, { .compatible = "koe,tx31d200vm0baa", .data = &koe_tx31d200vm0baa, }, { -- 2.11.0
next prev parent reply other threads:[~2018-05-09 15:44 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-12 14:37 [PATCH] display: panel: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2018-04-16 19:24 ` Rob Herring 2018-05-04 10:28 ` Lukasz Majewski 2018-05-10 14:22 ` Rob Herring 2018-05-11 15:04 ` Lukasz Majewski 2018-05-09 15:43 ` Lukasz Majewski [this message] 2018-05-10 14:24 ` [PATCH RESEND] " Rob Herring 2018-05-19 11:05 ` Lukasz Majewski 2018-05-28 7:55 ` Lukasz Majewski 2018-05-29 14:30 ` Thierry Reding 2018-05-29 15:01 ` Lukasz Majewski 2018-05-29 15:22 ` Thierry Reding 2018-05-29 15:33 ` Lukasz Majewski 2018-05-29 16:12 ` Thierry Reding 2018-05-29 15:05 ` [PATCH v2] " Lukasz Majewski 2018-06-22 8:56 ` Lukasz Majewski 2018-06-29 17:05 ` Lukasz Majewski 2018-07-08 8:43 ` Lukasz Majewski 2019-04-04 11:22 ` [PATCH v3 1/2] dt-bindings: display/panel: Add KOE tx14d24vm1bpa display description Lukasz Majewski 2019-04-04 11:22 ` [PATCH v3 2/2] drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2019-04-26 12:29 ` Lukasz Majewski 2019-04-26 12:29 ` [PATCH v3 1/2] dt-bindings: display/panel: Add KOE tx14d24vm1bpa display description Lukasz Majewski 2019-05-15 16:04 ` [PATCH v4 " Lukasz Majewski 2019-05-24 21:56 ` Rob Herring 2019-05-25 6:54 ` Sam Ravnborg 2019-05-15 16:06 ` [PATCH v4 2/2] drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2019-05-25 6:55 ` Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180509154338.2841-1-lukma@denx.de \ --to=lukma@denx.de \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).