LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] mtd: nand: Add support for reading ooblayout from device tree
@ 2018-05-11 21:29 Paul Cercueil
  2018-05-12  5:55 ` Boris Brezillon
  0 siblings, 1 reply; 8+ messages in thread
From: Paul Cercueil @ 2018-05-11 21:29 UTC (permalink / raw)
  To: David Woodhouse, Brian Norris, Boris Brezillon, Marek Vasut,
	Richard Weinberger, Rob Herring, Mark Rutland
  Cc: linux-mtd, devicetree, linux-kernel, Paul Cercueil

By specifying the properties "mtd-oob-ecc" and "mtd-oob-free", it is
now possible to specify from devicetree where the ECC data is located
inside the OOB region.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 Documentation/devicetree/bindings/mtd/nand.txt |  7 +++++
 drivers/mtd/nand/raw/nand_base.c               | 42 ++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 8bb11d809429..118ea92787cb 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -45,6 +45,13 @@ Optional NAND chip properties:
 		     as reliable as possible.
 - nand-rb: shall contain the native Ready/Busy ids.
 
+- nand-oob-ecc: <offset, length> couples of integers, specifying the offset
+		     and length of the ECC data in the OOB region. There can be more
+		     than one couple.
+- nand-oob-free: <offset, length> couples of integers, specifying the offset
+		     and length of a free-to-use area in the OOB region. There can be
+		     more than one couple.
+
 The ECC strength and ECC step size properties define the correction capability
 of a controller. Together, they say a controller can correct "{strength} bit
 errors per {size} bytes".
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 72f3a89da513..c905531effb0 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -213,6 +213,43 @@ static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
 	.free = nand_ooblayout_free_lp_hamming,
 };
 
+static int nand_oob_of(struct device_node *np, int section,
+		       struct mtd_oob_region *oobregion, const char *prop)
+{
+	int ret = of_property_read_u32_index(np, prop,
+			section * 2, &oobregion->offset);
+	if (ret == -EOVERFLOW)
+		return -ERANGE; /* We're done */
+	if (ret)
+		return ret;
+
+	ret = of_property_read_u32_index(np, prop,
+			section * 2 + 1, &oobregion->length);
+	if (ret == -EOVERFLOW)
+		return -EINVAL; /* We must have an even number of integers */
+
+	return ret;
+}
+
+static int nand_ooblayout_ecc_of(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	return nand_oob_of(mtd->dev.of_node, section,
+			oobregion, "nand-oob-ecc");
+}
+
+static int nand_ooblayout_free_of(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	return nand_oob_of(mtd->dev.of_node, section,
+			oobregion, "nand-oob-free");
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_of_ops = {
+	.ecc = nand_ooblayout_ecc_of,
+	.free = nand_ooblayout_free_of,
+};
+
 static int check_offs_len(struct mtd_info *mtd,
 					loff_t ofs, uint64_t len)
 {
@@ -5843,6 +5880,11 @@ static int nand_dt_init(struct nand_chip *chip)
 	if (of_property_read_bool(dn, "nand-ecc-maximize"))
 		chip->ecc.options |= NAND_ECC_MAXIMIZE;
 
+	if (!chip->mtd.ooblayout &&
+				of_property_read_bool(dn, "nand-oob-ecc") &&
+				of_property_read_bool(dn, "nand-oob-free"))
+		chip->mtd.ooblayout = &nand_ooblayout_of_ops;
+
 	return 0;
 }
 
-- 
2.11.0

^ permalink raw reply	[flat|nested] 8+ messages in thread
[parent not found: <20180512115551.56C6E20787@mail.bootlin.com>]

end of thread, other threads:[~2018-05-12 18:30 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-11 21:29 [PATCH] mtd: nand: Add support for reading ooblayout from device tree Paul Cercueil
2018-05-12  5:55 ` Boris Brezillon
     [not found] <20180512115551.56C6E20787@mail.bootlin.com>
2018-05-12 13:42 ` Boris Brezillon
2018-05-12 14:38   ` Paul Cercueil
2018-05-12 15:00     ` Boris Brezillon
2018-05-12 17:42       ` Paul Cercueil
2018-05-12 18:02         ` Boris Brezillon
2018-05-12 18:30           ` Paul Cercueil

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).