LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
@ 2018-05-11  9:17 Rafał Miłecki
  2018-05-11  9:17 ` [PATCH V2 2/2] ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y Rafał Miłecki
                   ` (2 more replies)
  0 siblings, 3 replies; 11+ messages in thread
From: Rafał Miłecki @ 2018-05-11  9:17 UTC (permalink / raw)
  To: Kalle Valo, Michael Büsch, Larry Finger, Matt Redfearn
  Cc: linux-wireless, Hauke Mehrtens, LKML, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.

Above commit added "SSB = y" dependency to the wrong symbol
SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
selected when needed. PCI core driver for core running in clienthost
mode is important for bus initialization. It's perfectly valid scenario
to have ssb built as module and use it with buses on PCI cards.

This fixes regression that affected all *module* users with PCI cards.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/ssb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 9371651d8017..b3f5cae98ea6 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -117,7 +117,7 @@ config SSB_SERIAL
 
 config SSB_DRIVER_PCICORE_POSSIBLE
 	bool
-	depends on SSB_PCIHOST && SSB = y
+	depends on SSB_PCIHOST
 	default y
 
 config SSB_DRIVER_PCICORE
-- 
2.13.6

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH V2 2/2] ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y
  2018-05-11  9:17 [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
@ 2018-05-11  9:17 ` Rafał Miłecki
  2018-05-11  9:21 ` [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
  2018-05-12  8:40 ` [V2, " Kalle Valo
  2 siblings, 0 replies; 11+ messages in thread
From: Rafał Miłecki @ 2018-05-11  9:17 UTC (permalink / raw)
  To: Kalle Valo, Michael Büsch, Larry Finger, Matt Redfearn
  Cc: linux-wireless, Hauke Mehrtens, LKML, Rafał Miłecki

From: Rafał Miłecki <rafal@milecki.pl>

SSB_PCICORE_HOSTMODE protects MIPS specific code that calls not exported
symbols pcibios_enable_device and register_pci_controller. This code is
supposed to be compiled only with ssb builtin.

This fixes:
ERROR: "pcibios_enable_device" [drivers/ssb/ssb.ko] undefined!
ERROR: "register_pci_controller" [drivers/ssb/ssb.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1

Reported-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
---
V2: Add Reported-by and Reviewed-by
---
 drivers/ssb/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index b3f5cae98ea6..c574dd210500 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -131,7 +131,7 @@ config SSB_DRIVER_PCICORE
 
 config SSB_PCICORE_HOSTMODE
 	bool "Hostmode support for SSB PCI core"
-	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS
+	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && SSB = y
 	help
 	  PCIcore hostmode operation (external PCI bus).
 
-- 
2.13.6

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11  9:17 [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
  2018-05-11  9:17 ` [PATCH V2 2/2] ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y Rafał Miłecki
@ 2018-05-11  9:21 ` Rafał Miłecki
  2018-05-11 10:13   ` Kalle Valo
  2018-05-12  8:40 ` [V2, " Kalle Valo
  2 siblings, 1 reply; 11+ messages in thread
From: Rafał Miłecki @ 2018-05-11  9:21 UTC (permalink / raw)
  To: Kalle Valo, Michael Büsch, Larry Finger, Matt Redfearn
  Cc: linux-wireless, Hauke Mehrtens, LKML, Rafał Miłecki

On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
>
> Above commit added "SSB = y" dependency to the wrong symbol
> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
> selected when needed. PCI core driver for core running in clienthost
> mode is important for bus initialization. It's perfectly valid scenario
> to have ssb built as module and use it with buses on PCI cards.
>
> This fixes regression that affected all *module* users with PCI cards.
>
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

As these patches fix regression/build error, I believe both should get
into 4.17.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11  9:21 ` [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
@ 2018-05-11 10:13   ` Kalle Valo
  2018-05-11 10:25     ` Rafał Miłecki
  2018-05-11 12:08     ` Larry Finger
  0 siblings, 2 replies; 11+ messages in thread
From: Kalle Valo @ 2018-05-11 10:13 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Michael Büsch, Larry Finger, Matt Redfearn, linux-wireless,
	Hauke Mehrtens, LKML, Rafał Miłecki

Rafał Miłecki <zajec5@gmail.com> writes:

> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
>>
>> Above commit added "SSB = y" dependency to the wrong symbol
>> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
>> selected when needed. PCI core driver for core running in clienthost
>> mode is important for bus initialization. It's perfectly valid scenario
>> to have ssb built as module and use it with buses on PCI cards.
>>
>> This fixes regression that affected all *module* users with PCI cards.
>>
>> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>
> As these patches fix regression/build error, I believe both should get
> into 4.17.

How much confidence do we have that we don't need to end up reverting
patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
more time for testing and waiting for feedback.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11 10:13   ` Kalle Valo
@ 2018-05-11 10:25     ` Rafał Miłecki
  2018-05-11 12:08     ` Larry Finger
  1 sibling, 0 replies; 11+ messages in thread
From: Rafał Miłecki @ 2018-05-11 10:25 UTC (permalink / raw)
  To: Kalle Valo
  Cc: Michael Büsch, Larry Finger, Matt Redfearn, linux-wireless,
	Hauke Mehrtens, LKML, Rafał Miłecki

On 11 May 2018 at 12:13, Kalle Valo <kvalo@codeaurora.org> wrote:
> Rafał Miłecki <zajec5@gmail.com> writes:
>
>> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
>>>
>>> Above commit added "SSB = y" dependency to the wrong symbol
>>> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
>>> selected when needed. PCI core driver for core running in clienthost
>>> mode is important for bus initialization. It's perfectly valid scenario
>>> to have ssb built as module and use it with buses on PCI cards.
>>>
>>> This fixes regression that affected all *module* users with PCI cards.
>>>
>>> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>
>> As these patches fix regression/build error, I believe both should get
>> into 4.17.
>
> How much confidence do we have that we don't need to end up reverting
> patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
> more time for testing and waiting for feedback.

Solution from 2/2 seems pretty obvious.

1) Enabling SSB_PCICORE_HOSTMODE compiles code that requires
non-exported symbols. Requiring "SSB = y" seems pretty obvious.
2) As pointed in another e-mail bcma has pretty identical solution
that seems to be working well, see commit 79ca239a68f8f ("bcma:
Prevent build of PCI host features in module").

That's just my opinion though, I shared since you asked.

If you prefer to queue that for 4.18, I'm OK. After all:
1) This problem affects MIPS arch only
2) It can be fixed by not selecting BCMA_DRIVER_PCI_HOSTMODE for SSB = m

-- 
Rafał

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11 10:13   ` Kalle Valo
  2018-05-11 10:25     ` Rafał Miłecki
@ 2018-05-11 12:08     ` Larry Finger
  2018-05-12  7:50       ` Kalle Valo
  1 sibling, 1 reply; 11+ messages in thread
From: Larry Finger @ 2018-05-11 12:08 UTC (permalink / raw)
  To: Kalle Valo, Rafał Miłecki
  Cc: Michael Büsch, Matt Redfearn, linux-wireless,
	Hauke Mehrtens, LKML, Rafał Miłecki

On 05/11/2018 05:13 AM, Kalle Valo wrote:
> Rafał Miłecki <zajec5@gmail.com> writes:
> 
>> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
>>>
>>> Above commit added "SSB = y" dependency to the wrong symbol
>>> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
>>> selected when needed. PCI core driver for core running in clienthost
>>> mode is important for bus initialization. It's perfectly valid scenario
>>> to have ssb built as module and use it with buses on PCI cards.
>>>
>>> This fixes regression that affected all *module* users with PCI cards.
>>>
>>> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>
>> As these patches fix regression/build error, I believe both should get
>> into 4.17.
> 
> How much confidence do we have that we don't need to end up reverting
> patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
> more time for testing and waiting for feedback.

Although I do not have the hardware to test the builds, I worked closely with 
the OP in the bug at b.r.c noted above. From that effort, it became clear what 
configuration variables were missing to cause the x86 failures. Patch 2 
satisfies the requirement, and prevents the build problems found by the MIPS 
users. Both patches are needed in 4.17.

Larry

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11 12:08     ` Larry Finger
@ 2018-05-12  7:50       ` Kalle Valo
  2018-05-12  8:01         ` Michael Büsch
  0 siblings, 1 reply; 11+ messages in thread
From: Kalle Valo @ 2018-05-12  7:50 UTC (permalink / raw)
  To: Larry Finger
  Cc: Rafał Miłecki, Michael Büsch, Matt Redfearn,
	linux-wireless, Hauke Mehrtens, LKML, Rafał Miłecki

Larry Finger <Larry.Finger@lwfinger.net> writes:

> On 05/11/2018 05:13 AM, Kalle Valo wrote:
>> Rafał Miłecki <zajec5@gmail.com> writes:
>>
>>> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
>>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>>
>>>> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
>>>>
>>>> Above commit added "SSB = y" dependency to the wrong symbol
>>>> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
>>>> selected when needed. PCI core driver for core running in clienthost
>>>> mode is important for bus initialization. It's perfectly valid scenario
>>>> to have ssb built as module and use it with buses on PCI cards.
>>>>
>>>> This fixes regression that affected all *module* users with PCI cards.
>>>>
>>>> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
>>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> As these patches fix regression/build error, I believe both should get
>>> into 4.17.
>>
>> How much confidence do we have that we don't need to end up reverting
>> patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
>> more time for testing and waiting for feedback.
>
> Although I do not have the hardware to test the builds, I worked
> closely with the OP in the bug at b.r.c noted above. From that effort,
> it became clear what configuration variables were missing to cause the
> x86 failures. Patch 2 satisfies the requirement, and prevents the
> build problems found by the MIPS users. Both patches are needed in
> 4.17.

And I assume Michael is ok with this approach as well as I haven't heard
from him. I'll then push both of these to 4.17.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-12  7:50       ` Kalle Valo
@ 2018-05-12  8:01         ` Michael Büsch
  2018-05-12 10:00           ` Rafał Miłecki
  0 siblings, 1 reply; 11+ messages in thread
From: Michael Büsch @ 2018-05-12  8:01 UTC (permalink / raw)
  To: Kalle Valo
  Cc: Larry Finger, Rafał Miłecki, Matt Redfearn,
	linux-wireless, Hauke Mehrtens, LKML, Rafał Miłecki

[-- Attachment #1: Type: text/plain, Size: 1478 bytes --]

On Sat, 12 May 2018 10:50:42 +0300
Kalle Valo <kvalo@codeaurora.org> wrote:

> Larry Finger <Larry.Finger@lwfinger.net> writes:
> 
> > On 05/11/2018 05:13 AM, Kalle Valo wrote:  
> >> Rafał Miłecki <zajec5@gmail.com> writes:
> >>  
> >>> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:  
>  [...]  
> >>>
> >>> As these patches fix regression/build error, I believe both should get
> >>> into 4.17.  
> >>
> >> How much confidence do we have that we don't need to end up reverting
> >> patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
> >> more time for testing and waiting for feedback.  
> >
> > Although I do not have the hardware to test the builds, I worked
> > closely with the OP in the bug at b.r.c noted above. From that effort,
> > it became clear what configuration variables were missing to cause the
> > x86 failures. Patch 2 satisfies the requirement, and prevents the
> > build problems found by the MIPS users. Both patches are needed in
> > 4.17.  
> 
> And I assume Michael is ok with this approach as well as I haven't heard
> from him. I'll then push both of these to 4.17.
> 

Yes, I'm OK with the patch, if we have a third patch that cleans up the
PCI_DRIVERS_LEGACY dependency by moving it to SSB_PCICORE_HOSTMODE
where it belongs. (This doesn't need to go into the stable tree.)
We currently implicitly get that via dependency chain, so this is OK
for now as-is.

-- 
Michael

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [V2, 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-11  9:17 [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
  2018-05-11  9:17 ` [PATCH V2 2/2] ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y Rafał Miłecki
  2018-05-11  9:21 ` [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
@ 2018-05-12  8:40 ` Kalle Valo
  2 siblings, 0 replies; 11+ messages in thread
From: Kalle Valo @ 2018-05-12  8:40 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Michael Büsch, Larry Finger, Matt Redfearn, linux-wireless,
	Hauke Mehrtens, LKML, Rafał Miłecki

Rafał Miłecki wrote:

> From: Rafał Miłecki <rafal@milecki.pl>
> 
> This reverts commit 882164a4a928bcaa53280940436ca476e6b1db8e.
> 
> Above commit added "SSB = y" dependency to the wrong symbol
> SSB_DRIVER_PCICORE_POSSIBLE and prevented SSB_DRIVER_PCICORE from being
> selected when needed. PCI core driver for core running in clienthost
> mode is important for bus initialization. It's perfectly valid scenario
> to have ssb built as module and use it with buses on PCI cards.
> 
> This fixes regression that affected all *module* users with PCI cards.
> 
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1572349
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

2 patches applied to wireless-drivers.git, thanks.

36910d82a80c Revert "ssb: Prevent build of PCI host features in module"
ebd27d3317c6 ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y

-- 
https://patchwork.kernel.org/patch/10393729/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-12  8:01         ` Michael Büsch
@ 2018-05-12 10:00           ` Rafał Miłecki
  2018-05-12 10:14             ` Michael Büsch
  0 siblings, 1 reply; 11+ messages in thread
From: Rafał Miłecki @ 2018-05-12 10:00 UTC (permalink / raw)
  To: Michael Büsch
  Cc: Kalle Valo, Larry Finger, Rafał Miłecki, Matt Redfearn,
	linux-wireless, Hauke Mehrtens, LKML

On 2018-05-12 10:01, Michael Büsch wrote:
> On Sat, 12 May 2018 10:50:42 +0300
> Kalle Valo <kvalo@codeaurora.org> wrote:
> 
>> Larry Finger <Larry.Finger@lwfinger.net> writes:
>> 
>> > On 05/11/2018 05:13 AM, Kalle Valo wrote:
>> >> Rafał Miłecki <zajec5@gmail.com> writes:
>> >>
>> >>> On 11 May 2018 at 11:17, Rafał Miłecki <zajec5@gmail.com> wrote:
>>  [...]
>> >>>
>> >>> As these patches fix regression/build error, I believe both should get
>> >>> into 4.17.
>> >>
>> >> How much confidence do we have that we don't need to end up reverting
>> >> patch 2 as well? I rather be pushing patch 2 to 4.18 so that there's
>> >> more time for testing and waiting for feedback.
>> >
>> > Although I do not have the hardware to test the builds, I worked
>> > closely with the OP in the bug at b.r.c noted above. From that effort,
>> > it became clear what configuration variables were missing to cause the
>> > x86 failures. Patch 2 satisfies the requirement, and prevents the
>> > build problems found by the MIPS users. Both patches are needed in
>> > 4.17.
>> 
>> And I assume Michael is ok with this approach as well as I haven't 
>> heard
>> from him. I'll then push both of these to 4.17.
>> 
> 
> Yes, I'm OK with the patch, if we have a third patch that cleans up the
> PCI_DRIVERS_LEGACY dependency by moving it to SSB_PCICORE_HOSTMODE
> where it belongs. (This doesn't need to go into the stable tree.)
> We currently implicitly get that via dependency chain, so this is OK
> for now as-is.

I'm planning to handle PCI_DRIVERS_LEGACY cleanup once my patches hit
net-next.git and then wireless-drivers-next.git. It's to avoid
conflicts.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module"
  2018-05-12 10:00           ` Rafał Miłecki
@ 2018-05-12 10:14             ` Michael Büsch
  0 siblings, 0 replies; 11+ messages in thread
From: Michael Büsch @ 2018-05-12 10:14 UTC (permalink / raw)
  To: Rafał Miłecki
  Cc: Kalle Valo, Larry Finger, Rafał Miłecki, Matt Redfearn,
	linux-wireless, Hauke Mehrtens, LKML

[-- Attachment #1: Type: text/plain, Size: 681 bytes --]

On Sat, 12 May 2018 12:00:07 +0200
Rafał Miłecki <rafal@milecki.pl> wrote:

> > Yes, I'm OK with the patch, if we have a third patch that cleans up the
> > PCI_DRIVERS_LEGACY dependency by moving it to SSB_PCICORE_HOSTMODE
> > where it belongs. (This doesn't need to go into the stable tree.)
> > We currently implicitly get that via dependency chain, so this is OK
> > for now as-is.  
> 
> I'm planning to handle PCI_DRIVERS_LEGACY cleanup once my patches hit
> net-next.git and then wireless-drivers-next.git. It's to avoid
> conflicts.

Yes, thanks. Take your time. We're not in a hurry. :)
This change should not make a functional difference.

-- 
Michael

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2018-05-12 11:15 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-11  9:17 [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
2018-05-11  9:17 ` [PATCH V2 2/2] ssb: make SSB_PCICORE_HOSTMODE depend on SSB = y Rafał Miłecki
2018-05-11  9:21 ` [PATCH V2 1/2] Revert "ssb: Prevent build of PCI host features in module" Rafał Miłecki
2018-05-11 10:13   ` Kalle Valo
2018-05-11 10:25     ` Rafał Miłecki
2018-05-11 12:08     ` Larry Finger
2018-05-12  7:50       ` Kalle Valo
2018-05-12  8:01         ` Michael Büsch
2018-05-12 10:00           ` Rafał Miłecki
2018-05-12 10:14             ` Michael Büsch
2018-05-12  8:40 ` [V2, " Kalle Valo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).