From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1751977AbeEQFur (ORCPT <rfc822;w@1wt.eu>);
        Thu, 17 May 2018 01:50:47 -0400
Received: from metis.ext.pengutronix.de ([85.220.165.71]:59869 "EHLO
        metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S1751322AbeEQFun (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Thu, 17 May 2018 01:50:43 -0400
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>, Mark Brown <broonie@kernel.org>,
        "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
        Andrew Morton <akpm@linux-foundation.org>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Leonard Crestez <leonard.crestez@nxp.com>,
        Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
        Michael Turquette <mturquette@baylibre.com>,
        Stephen Boyd <sboyd@codeaurora.org>,
        Fabio Estevam <fabio.estevam@nxp.com>,
        Russell King <linux@armlinux.org.uk>
Subject: [PATCH v7 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option
Date: Thu, 17 May 2018 07:50:14 +0200
Message-Id: <20180517055014.6607-7-o.rempel@pengutronix.de>
X-Mailer: git-send-email 2.17.0
In-Reply-To: <20180517055014.6607-1-o.rempel@pengutronix.de>
References: <20180517055014.6607-1-o.rempel@pengutronix.de>
X-SA-Exim-Connect-IP: 2001:67c:670:100:1d::7
X-SA-Exim-Mail-From: ore@pengutronix.de
X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false
X-PTX-Original-Recipient: linux-kernel@vger.kernel.org
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2e98c92adff7..a0e9753ee767 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -170,6 +174,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
-- 
2.17.0