LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 1/2] regulator: pfuze100: add enable/disable for switch
@ 2018-05-17  7:27 Anson Huang
  2018-05-17  7:27 ` [PATCH 2/2] regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops Anson Huang
  2018-05-17 17:13 ` Applied "regulator: pfuze100: add enable/disable for switch" " Mark Brown
  0 siblings, 2 replies; 4+ messages in thread
From: Anson Huang @ 2018-05-17  7:27 UTC (permalink / raw)
  To: lgirdwood, broonie; +Cc: Linux-imx, linux-kernel

Add enable/disable support for switch regulator on pfuze100.

Based on Robin Gong's patch from the NXP kernel tree.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 drivers/regulator/pfuze100-regulator.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 680f076..053eb1e 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -155,6 +155,9 @@ static const struct regulator_ops pfuze100_fixed_regulator_ops = {
 };
 
 static const struct regulator_ops pfuze100_sw_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -200,6 +203,11 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
 			.uV_step = (step),	\
 			.vsel_reg = (base) + PFUZE100_VOL_OFFSET,	\
 			.vsel_mask = 0x3f,	\
+			.enable_reg = (base) + PFUZE100_MODE_OFFSET,	\
+			.enable_val = 0xc,	\
+			.disable_val = 0x0,	\
+			.enable_mask = 0xf,	\
+			.enable_time = 500,	\
 		},	\
 		.stby_reg = (base) + PFUZE100_STANDBY_OFFSET,	\
 		.stby_mask = 0x3f,	\
-- 
2.7.4

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2018-05-17 17:13 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-17  7:27 [PATCH 1/2] regulator: pfuze100: add enable/disable for switch Anson Huang
2018-05-17  7:27 ` [PATCH 2/2] regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops Anson Huang
2018-05-17 17:13   ` Applied "regulator: pfuze100: add .is_enable() for pfuze100_swb_regulator_ops" to the regulator tree Mark Brown
2018-05-17 17:13 ` Applied "regulator: pfuze100: add enable/disable for switch" " Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).