LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Lukasz Majewski <lukma@denx.de> To: Thierry Reding <thierry.reding@gmail.com> Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, David Airlie <airlied@linux.ie>, Rob Herring <robh@kernel.org>, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH RESEND] display: panel: Add KOE tx14d24vm1bpa display support (320x240) Date: Sat, 19 May 2018 13:05:33 +0200 [thread overview] Message-ID: <20180519130533.2494bceb@jawa> (raw) In-Reply-To: <20180509154338.2841-1-lukma@denx.de> [-- Attachment #1: Type: text/plain, Size: 3701 bytes --] Hi Thierry, > This commit adds support for KOE's 5.7" display. > Thierry, shall I perform some more work on this code, or is it eligible for applying to your tree? Best regards, Łukasz > Signed-off-by: Lukasz Majewski <lukma@denx.de> > --- > .../bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 > ++++++++++++++++++++++ > drivers/gpu/drm/panel/panel-simple.c | 26 > ++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 > Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt > > diff --git > a/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt > b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt > new file mode 100644 index 000000000000..be7ac666807b --- /dev/null > +++ > b/Documentation/devicetree/bindings/display/panel/koe,tx14d24vm1bpa.txt > @@ -0,0 +1,42 @@ +Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x > 240) TFT LCD panel + > +Required properties: > +- compatible: should be "koe,tx14d24vm1bpa" > +- backlight: phandle of the backlight device attached to the panel > +- power-supply: single regulator to provide the supply voltage > + > +Required nodes: > +- port: Parallel port mapping to connect this display > + > +This panel needs single power supply voltage. Its backlight is > conntrolled +via PWM signal. > + > +Example: > +-------- > + > +Example device-tree definition when connected to iMX53 based board > + > + lcd_panel: lcd-panel { > + compatible = "koe,tx14d24vm1bpa"; > + backlight = <&backlight_lcd>; > + power-supply = <®_3v3>; > + > + port { > + lcd_panel_in: endpoint { > + remote-endpoint = <&lcd_display_out>; > + }; > + }; > + }; > + > +Then one needs to extend the dispX node: > + > + lcd_display: disp1 { > + > + port@1 { > + reg = <1>; > + > + lcd_display_out: endpoint { > + remote-endpoint = <&lcd_panel_in>; > + }; > + }; > + }; > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c index > d9984bdb5bb5..103b43ce7dee 100644 --- > a/drivers/gpu/drm/panel/panel-simple.c +++ > b/drivers/gpu/drm/panel/panel-simple.c @@ -1268,6 +1268,29 @@ static > const struct panel_desc innolux_zj070na_01p = { }, > }; > > +static const struct display_timing koe_tx14d24vm1bpa_timing = { > + .pixelclock = { 5580000, 5850000, 6200000 }, > + .hactive = { 320, 320, 320 }, > + .hfront_porch = { 30, 30, 30 }, > + .hback_porch = { 30, 30, 30 }, > + .hsync_len = { 1, 5, 17 }, > + .vactive = { 240, 240, 240 }, > + .vfront_porch = { 6, 6, 6 }, > + .vback_porch = { 5, 5, 5 }, > + .vsync_len = { 1, 2, 11 }, > + .flags = DISPLAY_FLAGS_DE_HIGH, > +}; > + > +static const struct panel_desc koe_tx14d24vm1bpa = { > + .timings = &koe_tx14d24vm1bpa_timing, > + .num_timings = 1, > + .bpc = 6, > + .size = { > + .width = 115, > + .height = 86, > + }, > +}; > + > static const struct display_timing koe_tx31d200vm0baa_timing = { > .pixelclock = { 39600000, 43200000, 48000000 }, > .hactive = { 1280, 1280, 1280 }, > @@ -2204,6 +2227,9 @@ static const struct of_device_id > platform_of_match[] = { .compatible = "innolux,zj070na-01p", > .data = &innolux_zj070na_01p, > }, { > + .compatible = "koe,tx14d24vm1bpa", > + .data = &koe_tx14d24vm1bpa, > + }, { > .compatible = "koe,tx31d200vm0baa", > .data = &koe_tx31d200vm0baa, > }, { Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2018-05-19 11:06 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-12 14:37 [PATCH] display: panel: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2018-04-16 19:24 ` Rob Herring 2018-05-04 10:28 ` Lukasz Majewski 2018-05-10 14:22 ` Rob Herring 2018-05-11 15:04 ` Lukasz Majewski 2018-05-09 15:43 ` [PATCH RESEND] " Lukasz Majewski 2018-05-10 14:24 ` Rob Herring 2018-05-19 11:05 ` Lukasz Majewski [this message] 2018-05-28 7:55 ` Lukasz Majewski 2018-05-29 14:30 ` Thierry Reding 2018-05-29 15:01 ` Lukasz Majewski 2018-05-29 15:22 ` Thierry Reding 2018-05-29 15:33 ` Lukasz Majewski 2018-05-29 16:12 ` Thierry Reding 2018-05-29 15:05 ` [PATCH v2] " Lukasz Majewski 2018-06-22 8:56 ` Lukasz Majewski 2018-06-29 17:05 ` Lukasz Majewski 2018-07-08 8:43 ` Lukasz Majewski 2019-04-04 11:22 ` [PATCH v3 1/2] dt-bindings: display/panel: Add KOE tx14d24vm1bpa display description Lukasz Majewski 2019-04-04 11:22 ` [PATCH v3 2/2] drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2019-04-26 12:29 ` Lukasz Majewski 2019-04-26 12:29 ` [PATCH v3 1/2] dt-bindings: display/panel: Add KOE tx14d24vm1bpa display description Lukasz Majewski 2019-05-15 16:04 ` [PATCH v4 " Lukasz Majewski 2019-05-24 21:56 ` Rob Herring 2019-05-25 6:54 ` Sam Ravnborg 2019-05-15 16:06 ` [PATCH v4 2/2] drm/panel: simple: Add KOE tx14d24vm1bpa display support (320x240) Lukasz Majewski 2019-05-25 6:55 ` Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180519130533.2494bceb@jawa \ --to=lukma@denx.de \ --cc=airlied@linux.ie \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).