LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Sricharan R <sricharan@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Rohit kumar <rohitkr@codeaurora.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling
Date: Tue, 22 May 2018 22:20:51 -0700	[thread overview]
Message-ID: <20180523052054.19025-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180523052054.19025-1-bjorn.andersson@linaro.org>

Shared between all Hexagon V5 based remoteprocs is the handling of the 5
interrupts and the SMP2P stop request, so break this out into a separate
function in order to allow these drivers to be cleaned up.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/remoteproc/Kconfig     |   5 +
 drivers/remoteproc/Makefile    |   1 +
 drivers/remoteproc/qcom_q6v5.c | 243 +++++++++++++++++++++++++++++++++
 drivers/remoteproc/qcom_q6v5.h |  46 +++++++
 4 files changed, 295 insertions(+)
 create mode 100644 drivers/remoteproc/qcom_q6v5.c
 create mode 100644 drivers/remoteproc/qcom_q6v5.h

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index cd1c168fd188..63b79ea91a21 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -102,6 +102,11 @@ config QCOM_ADSP_PIL
 config QCOM_RPROC_COMMON
 	tristate
 
+config QCOM_Q6V5_COMMON
+	tristate
+	depends on ARCH_QCOM
+	depends on QCOM_SMEM
+
 config QCOM_Q6V5_PIL
 	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
 	depends on OF && ARCH_QCOM
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 02627ede8d4a..5dd0249cf76a 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DA8XX_REMOTEPROC)		+= da8xx_remoteproc.o
 obj-$(CONFIG_KEYSTONE_REMOTEPROC)	+= keystone_remoteproc.o
 obj-$(CONFIG_QCOM_ADSP_PIL)		+= qcom_adsp_pil.o
 obj-$(CONFIG_QCOM_RPROC_COMMON)		+= qcom_common.o
+obj-$(CONFIG_QCOM_Q6V5_COMMON)		+= qcom_q6v5.o
 obj-$(CONFIG_QCOM_Q6V5_PIL)		+= qcom_q6v5_pil.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
 obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
new file mode 100644
index 000000000000..9076537a1671
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm Peripheral Image Loader for Q6V5 WCSS
+ *
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include <linux/remoteproc.h>
+#include "qcom_q6v5.h"
+
+/**
+ * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
+ * @q6v5:	reference to qcom_q6v5 context to be reinitialized
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
+{
+	reinit_completion(&q6v5->start_done);
+	reinit_completion(&q6v5->stop_done);
+
+	q6v5->running = true;
+	q6v5->handover_issued = false;
+
+	enable_irq(q6v5->handover_irq);
+
+	return 0;
+}
+
+/**
+ * qcom_q6v5_unprepare() - unprepare the qcom_q6v5 context after stop
+ * @q6v5:	reference to qcom_q6v5 context to be unprepared
+ *
+ * Return: 0 on success, 1 if handover hasn't yet been called
+ */
+int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
+{
+	disable_irq(q6v5->handover_irq);
+
+	return !q6v5->handover_issued;
+}
+
+static irqreturn_t q6v5_wdog_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+	size_t len;
+	char *msg;
+
+	/* Sometimes the stop triggers a watchdog rather than a stop-ack */
+	if (!q6v5->running) {
+		complete(&q6v5->stop_done);
+		return IRQ_HANDLED;
+	}
+
+	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
+	if (!IS_ERR(msg) && len > 0 && msg[0])
+		dev_err(q6v5->dev, "watchdog received: %s\n", msg);
+	else
+		dev_err(q6v5->dev, "watchdog without message\n");
+
+	rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_fatal_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+	size_t len;
+	char *msg;
+
+	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, q6v5->crash_reason, &len);
+	if (!IS_ERR(msg) && len > 0 && msg[0])
+		dev_err(q6v5->dev, "fatal error received: %s\n", msg);
+	else
+		dev_err(q6v5->dev, "fatal error without message\n");
+
+	rproc_report_crash(q6v5->rproc, RPROC_FATAL_ERROR);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_ready_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	complete(&q6v5->start_done);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * qcom_q6v5_wait_for_start() - wait for remote processor start signal
+ * @q6v5:	reference to qcom_q6v5 context
+ * @timeout:	timeout to wait for the event, in jiffies
+ *
+ * qcom_q6v5_unprepare() should not be called when this function fails.
+ *
+ * Return: 0 on success, -ETIMEDOUT on timeout
+ */
+int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout)
+{
+	int ret;
+
+	ret = wait_for_completion_timeout(&q6v5->start_done, timeout);
+	if (!ret)
+		disable_irq(q6v5->handover_irq);
+
+	return !ret ? -ETIMEDOUT : 0;
+}
+
+static irqreturn_t q6v5_handover_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	if (q6v5->handover)
+		q6v5->handover(q6v5);
+
+	q6v5->handover_issued = true;
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t q6v5_stop_interrupt(int irq, void *data)
+{
+	struct qcom_q6v5 *q6v5 = data;
+
+	complete(&q6v5->stop_done);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * qcom_q6v5_request_stop() - request the remote processor to stop
+ * @q6v5:	reference to qcom_q6v5 context
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
+{
+	int ret;
+
+	q6v5->running = false;
+
+	qcom_smem_state_update_bits(q6v5->state,
+				    BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
+
+	ret = wait_for_completion_timeout(&q6v5->stop_done, 5 * HZ);
+
+	qcom_smem_state_update_bits(q6v5->state, BIT(q6v5->stop_bit), 0);
+
+	return ret == 0 ? -ETIMEDOUT : 0;
+}
+
+/**
+ * qcom_q6v5_init() - initializer of the q6v5 common struct
+ * @q6v5:	handle to be initialized
+ * @pdev:	platform_device reference for acquiring resources
+ * @rproc:	associated remoteproc instance
+ * @crash_reason: SMEM id for crash reason string, or 0 if none
+ * @handover:	function to be called when proxy resources should be released
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
+		   struct rproc *rproc, int crash_reason,
+		   void (*handover)(struct qcom_q6v5 *q6v5))
+{
+	int ret;
+
+	q6v5->rproc = rproc;
+	q6v5->dev = &pdev->dev;
+	q6v5->crash_reason = crash_reason;
+	q6v5->handover = handover;
+
+	init_completion(&q6v5->start_done);
+	init_completion(&q6v5->stop_done);
+
+	q6v5->wdog_irq = platform_get_irq_byname(pdev, "wdog");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->wdog_irq,
+					NULL, q6v5_wdog_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 wdog", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire wdog IRQ\n");
+		return ret;
+	}
+
+	q6v5->fatal_irq = platform_get_irq_byname(pdev, "fatal");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->fatal_irq,
+					NULL, q6v5_fatal_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 fatal", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire fatal IRQ\n");
+		return ret;
+	}
+
+	q6v5->ready_irq = platform_get_irq_byname(pdev, "ready");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->ready_irq,
+					NULL, q6v5_ready_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 ready", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire ready IRQ\n");
+		return ret;
+	}
+
+	q6v5->handover_irq = platform_get_irq_byname(pdev, "handover");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->handover_irq,
+					NULL, q6v5_handover_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 handover", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire handover IRQ\n");
+		return ret;
+	}
+	disable_irq(q6v5->handover_irq);
+
+	q6v5->stop_irq = platform_get_irq_byname(pdev, "stop-ack");
+	ret = devm_request_threaded_irq(&pdev->dev, q6v5->stop_irq,
+					NULL, q6v5_stop_interrupt,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"q6v5 stop", q6v5);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to acquire stop-ack IRQ\n");
+		return ret;
+	}
+
+	q6v5->state = qcom_smem_state_get(&pdev->dev, "stop", &q6v5->stop_bit);
+	if (IS_ERR(q6v5->state)) {
+		dev_err(&pdev->dev, "failed to acquire stop state\n");
+		return PTR_ERR(q6v5->state);
+	}
+
+	return 0;
+}
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
new file mode 100644
index 000000000000..7ac92c1e0f49
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __QCOM_Q6V5_H__
+#define __QCOM_Q6V5_H__
+
+#include <linux/kernel.h>
+#include <linux/completion.h>
+
+struct rproc;
+struct qcom_smem_state;
+
+struct qcom_q6v5 {
+	struct device *dev;
+	struct rproc *rproc;
+
+	struct qcom_smem_state *state;
+	unsigned stop_bit;
+
+	int wdog_irq;
+	int fatal_irq;
+	int ready_irq;
+	int handover_irq;
+	int stop_irq;
+
+	bool handover_issued;
+
+	struct completion start_done;
+	struct completion stop_done;
+
+	int crash_reason;
+
+	bool running;
+
+	void (*handover)(struct qcom_q6v5 *q6v5);
+};
+
+int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
+		   struct rproc *rproc, int crash_reason,
+		   void (*handover)(struct qcom_q6v5 *q6v5));
+
+int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
+
+#endif
-- 
2.17.0

  parent reply	other threads:[~2018-05-23  5:22 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23  5:20 [RFC PATCH 0/5] Hexagon remoteproc spring cleaning Bjorn Andersson
2018-05-23  5:20 ` [RFC PATCH 1/5] remoteproc: qcom: mdt_loader: Make the firmware authentication optional Bjorn Andersson
2018-05-23  5:20 ` Bjorn Andersson [this message]
2018-06-01  6:16   ` [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling Sricharan R
2018-06-01 15:18     ` Sibi S
2018-06-01 16:39       ` Sricharan R
2018-05-23  5:20 ` [RFC PATCH 3/5] remoteproc: qcom: adsp: Use common q6v5 helpers Bjorn Andersson
2018-06-01  6:25   ` Sricharan R
2018-06-01 13:35   ` Rohit Kumar
2018-05-23  5:20 ` [RFC PATCH 4/5] remoteproc: qcom: q6v5-pil: " Bjorn Andersson
2018-06-01  6:42   ` Sricharan R
2018-05-23  5:20 ` [RFC PATCH 5/5] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver Bjorn Andersson
2018-05-23  6:05   ` Vinod
2018-05-23  6:58     ` Bjorn Andersson
2018-05-23  7:37       ` Vinod
2018-05-23 14:48         ` Sricharan R
2018-05-29  4:07           ` Bjorn Andersson
2018-05-29  8:32             ` Sricharan R
2018-06-01 13:33 ` [RFC PATCH 0/5] Hexagon remoteproc spring cleaning Rohit Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180523052054.19025-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=rohitkr@codeaurora.org \
    --cc=sibis@codeaurora.org \
    --cc=sricharan@codeaurora.org \
    --subject='Re: [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).