LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Sricharan R <sricharan@codeaurora.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	Rohit kumar <rohitkr@codeaurora.org>
Cc: Andy Gross <andy.gross@linaro.org>,
	linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-arm-msm@vger.kernel.org
Subject: [RFC PATCH 3/5] remoteproc: qcom: adsp: Use common q6v5 helpers
Date: Tue, 22 May 2018 22:20:52 -0700	[thread overview]
Message-ID: <20180523052054.19025-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180523052054.19025-1-bjorn.andersson@linaro.org>

Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted
helper functions. The use of the handover callback does introduce latent
disabling of proxy resources. But apart from this there should be no
change in functionality.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/remoteproc/Kconfig         |   1 +
 drivers/remoteproc/qcom_adsp_pil.c | 156 +++++------------------------
 2 files changed, 28 insertions(+), 129 deletions(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 63b79ea91a21..d51d155cf8bd 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -93,6 +93,7 @@ config QCOM_ADSP_PIL
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
 	select QCOM_MDT_LOADER
+	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
diff --git a/drivers/remoteproc/qcom_adsp_pil.c b/drivers/remoteproc/qcom_adsp_pil.c
index 89a86ce07f99..d4339a6da616 100644
--- a/drivers/remoteproc/qcom_adsp_pil.c
+++ b/drivers/remoteproc/qcom_adsp_pil.c
@@ -31,6 +31,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
 struct adsp_data {
@@ -48,14 +49,7 @@ struct qcom_adsp {
 	struct device *dev;
 	struct rproc *rproc;
 
-	int wdog_irq;
-	int fatal_irq;
-	int ready_irq;
-	int handover_irq;
-	int stop_ack_irq;
-
-	struct qcom_smem_state *state;
-	unsigned stop_bit;
+	struct qcom_q6v5 q6v5;
 
 	struct clk *xo;
 	struct clk *aggre2_clk;
@@ -96,6 +90,8 @@ static int adsp_start(struct rproc *rproc)
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;
 
+	qcom_q6v5_prepare(&adsp->q6v5);
+
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
 		return ret;
@@ -119,16 +115,14 @@ static int adsp_start(struct rproc *rproc)
 		goto disable_px_supply;
 	}
 
-	ret = wait_for_completion_timeout(&adsp->start_done,
-					  msecs_to_jiffies(5000));
-	if (!ret) {
+	ret = qcom_q6v5_wait_for_start(&adsp->q6v5, msecs_to_jiffies(5000));
+	if (ret == -ETIMEDOUT) {
 		dev_err(adsp->dev, "start timed out\n");
 		qcom_scm_pas_shutdown(adsp->pas_id);
-		ret = -ETIMEDOUT;
 		goto disable_px_supply;
 	}
 
-	ret = 0;
+	return 0;
 
 disable_px_supply:
 	regulator_disable(adsp->px_supply);
@@ -142,28 +136,34 @@ static int adsp_start(struct rproc *rproc)
 	return ret;
 }
 
+static void qcom_pas_handover(struct qcom_q6v5 *q6v5)
+{
+	struct qcom_adsp *adsp = container_of(q6v5, struct qcom_adsp, q6v5);
+
+	regulator_disable(adsp->px_supply);
+	regulator_disable(adsp->cx_supply);
+	clk_disable_unprepare(adsp->aggre2_clk);
+	clk_disable_unprepare(adsp->xo);
+}
+
 static int adsp_stop(struct rproc *rproc)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int handover;
 	int ret;
 
-	qcom_smem_state_update_bits(adsp->state,
-				    BIT(adsp->stop_bit),
-				    BIT(adsp->stop_bit));
-
-	ret = wait_for_completion_timeout(&adsp->stop_done,
-					  msecs_to_jiffies(5000));
-	if (ret == 0)
+	ret = qcom_q6v5_request_stop(&adsp->q6v5);
+	if (ret == -ETIMEDOUT)
 		dev_err(adsp->dev, "timed out on wait\n");
 
-	qcom_smem_state_update_bits(adsp->state,
-				    BIT(adsp->stop_bit),
-				    0);
-
 	ret = qcom_scm_pas_shutdown(adsp->pas_id);
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
+	handover = qcom_q6v5_unprepare(&adsp->q6v5);
+	if (handover)
+		qcom_pas_handover(&adsp->q6v5);
+
 	return ret;
 }
 
@@ -187,53 +187,6 @@ static const struct rproc_ops adsp_ops = {
 	.load = adsp_load,
 };
 
-static irqreturn_t adsp_wdog_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	rproc_report_crash(adsp->rproc, RPROC_WATCHDOG);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_fatal_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-	size_t len;
-	char *msg;
-
-	msg = qcom_smem_get(QCOM_SMEM_HOST_ANY, adsp->crash_reason_smem, &len);
-	if (!IS_ERR(msg) && len > 0 && msg[0])
-		dev_err(adsp->dev, "fatal error received: %s\n", msg);
-
-	rproc_report_crash(adsp->rproc, RPROC_FATAL_ERROR);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_ready_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_handover_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	complete(&adsp->start_done);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t adsp_stop_ack_interrupt(int irq, void *dev)
-{
-	struct qcom_adsp *adsp = dev;
-
-	complete(&adsp->stop_done);
-
-	return IRQ_HANDLED;
-}
-
 static int adsp_init_clock(struct qcom_adsp *adsp)
 {
 	int ret;
@@ -272,29 +225,6 @@ static int adsp_init_regulator(struct qcom_adsp *adsp)
 	return PTR_ERR_OR_ZERO(adsp->px_supply);
 }
 
-static int adsp_request_irq(struct qcom_adsp *adsp,
-			     struct platform_device *pdev,
-			     const char *name,
-			     irq_handler_t thread_fn)
-{
-	int ret;
-
-	ret = platform_get_irq_byname(pdev, name);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "no %s IRQ defined\n", name);
-		return ret;
-	}
-
-	ret = devm_request_threaded_irq(&pdev->dev, ret,
-					NULL, thread_fn,
-					IRQF_ONESHOT,
-					"adsp", adsp);
-	if (ret)
-		dev_err(&pdev->dev, "request %s IRQ failed\n", name);
-
-	return ret;
-}
-
 static int adsp_alloc_memory_region(struct qcom_adsp *adsp)
 {
 	struct device_node *node;
@@ -348,13 +278,9 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->dev = &pdev->dev;
 	adsp->rproc = rproc;
 	adsp->pas_id = desc->pas_id;
-	adsp->crash_reason_smem = desc->crash_reason_smem;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
 	platform_set_drvdata(pdev, adsp);
 
-	init_completion(&adsp->start_done);
-	init_completion(&adsp->stop_done);
-
 	ret = adsp_alloc_memory_region(adsp);
 	if (ret)
 		goto free_rproc;
@@ -367,37 +293,10 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = adsp_request_irq(adsp, pdev, "wdog", adsp_wdog_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->wdog_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "fatal", adsp_fatal_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->fatal_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "ready", adsp_ready_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->ready_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "handover", adsp_handover_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->handover_irq = ret;
-
-	ret = adsp_request_irq(adsp, pdev, "stop-ack", adsp_stop_ack_interrupt);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->stop_ack_irq = ret;
-
-	adsp->state = qcom_smem_state_get(&pdev->dev, "stop",
-					  &adsp->stop_bit);
-	if (IS_ERR(adsp->state)) {
-		ret = PTR_ERR(adsp->state);
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+			     qcom_pas_handover);
+	if (ret)
 		goto free_rproc;
-	}
 
 	qcom_add_glink_subdev(rproc, &adsp->glink_subdev);
 	qcom_add_smd_subdev(rproc, &adsp->smd_subdev);
@@ -422,7 +321,6 @@ static int adsp_remove(struct platform_device *pdev)
 {
 	struct qcom_adsp *adsp = platform_get_drvdata(pdev);
 
-	qcom_smem_state_put(adsp->state);
 	rproc_del(adsp->rproc);
 
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
-- 
2.17.0

  parent reply	other threads:[~2018-05-23  5:21 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23  5:20 [RFC PATCH 0/5] Hexagon remoteproc spring cleaning Bjorn Andersson
2018-05-23  5:20 ` [RFC PATCH 1/5] remoteproc: qcom: mdt_loader: Make the firmware authentication optional Bjorn Andersson
2018-05-23  5:20 ` [RFC PATCH 2/5] remoteproc: q6v5: Extract common resource handling Bjorn Andersson
2018-06-01  6:16   ` Sricharan R
2018-06-01 15:18     ` Sibi S
2018-06-01 16:39       ` Sricharan R
2018-05-23  5:20 ` Bjorn Andersson [this message]
2018-06-01  6:25   ` [RFC PATCH 3/5] remoteproc: qcom: adsp: Use common q6v5 helpers Sricharan R
2018-06-01 13:35   ` Rohit Kumar
2018-05-23  5:20 ` [RFC PATCH 4/5] remoteproc: qcom: q6v5-pil: " Bjorn Andersson
2018-06-01  6:42   ` Sricharan R
2018-05-23  5:20 ` [RFC PATCH 5/5] remoteproc: qcom: Introduce Hexagon V5 based WCSS driver Bjorn Andersson
2018-05-23  6:05   ` Vinod
2018-05-23  6:58     ` Bjorn Andersson
2018-05-23  7:37       ` Vinod
2018-05-23 14:48         ` Sricharan R
2018-05-29  4:07           ` Bjorn Andersson
2018-05-29  8:32             ` Sricharan R
2018-06-01 13:33 ` [RFC PATCH 0/5] Hexagon remoteproc spring cleaning Rohit Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180523052054.19025-4-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=rohitkr@codeaurora.org \
    --cc=sibis@codeaurora.org \
    --cc=sricharan@codeaurora.org \
    --subject='Re: [RFC PATCH 3/5] remoteproc: qcom: adsp: Use common q6v5 helpers' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).