LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps
@ 2018-05-24  7:06 Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
                   ` (12 more replies)
  0 siblings, 13 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

This v1 cover letter is quoted in [1].

For maintainers the table below should help you focus on the patches targetted at you, and ignore the other noise.

The differences since v1 is by maintainers / topic / patch :
- Arnd and Daniel / PXA topic / 0002
  devices.c split into pxa25x.c, pxa27x.c and pxa3xx.c
- Boris and Daniel / MTD topic / 0005
  Review and ack of this one
- Arnd and netdev / NET topic / 0006 and 0007
  Arnd comment taken, review and ack of these one
- Mark and alsa-devel / ASoC topic / 0008
  Mark, I couldn't keep your former Ack because :
    - I changed one line so that the cpu device provides the DMA
    - I added pxa2xx-i2s which was forgotten
  Therefore I need a new ack
- Arnd and Daniel / SSP topic / 0013
  Review and ack of this one

Happy review.

--
Robert

Robert Jarzmik (13):
  dmaengine: pxa: use a dma slave map
  ARM: pxa: add dma slave map
  mmc: pxamci: remove the dmaengine compat need
  media: pxa_camera: remove the dmaengine compat need
  mtd: rawnand: marvell: remove the dmaengine compat need
  net: smc911x: remove the dmaengine compat need
  net: smc91x: remove the dmaengine compat need
  ASoC: pxa: remove the dmaengine compat need
  ata: pata_pxa: remove the dmaengine compat need
  dmaengine: pxa: document pxad_param
  dmaengine: pxa: make the filter function internal
  ARM: pxa: remove the DMA IO resources
  ARM: pxa: change SSP DMA channels allocation

 arch/arm/mach-pxa/devices.c           | 148 +---------------------------------
 arch/arm/mach-pxa/devices.h           |   6 +-
 arch/arm/mach-pxa/pxa25x.c            |  41 +++++++++-
 arch/arm/mach-pxa/pxa27x.c            |  42 +++++++++-
 arch/arm/mach-pxa/pxa3xx.c            |  44 +++++++++-
 arch/arm/plat-pxa/ssp.c               |  47 -----------
 drivers/ata/pata_pxa.c                |  10 +--
 drivers/dma/pxa_dma.c                 |  13 ++-
 drivers/media/platform/pxa_camera.c   |  22 +----
 drivers/mmc/host/pxamci.c             |  29 +------
 drivers/mtd/nand/raw/marvell_nand.c   |  17 +---
 drivers/net/ethernet/smsc/smc911x.c   |  16 +---
 drivers/net/ethernet/smsc/smc91x.c    |  12 +--
 drivers/net/ethernet/smsc/smc91x.h    |   1 -
 include/linux/dma/pxa-dma.h           |  20 +++--
 include/linux/platform_data/mmp_dma.h |   4 +
 include/linux/pxa2xx_ssp.h            |   2 -
 sound/arm/pxa2xx-ac97.c               |  14 +---
 sound/arm/pxa2xx-pcm-lib.c            |   6 +-
 sound/soc/pxa/pxa-ssp.c               |   5 +-
 sound/soc/pxa/pxa2xx-ac97.c           |  32 ++------
 sound/soc/pxa/pxa2xx-i2s.c            |   6 +-
 22 files changed, 180 insertions(+), 357 deletions(-)

-- 
2.11.0

---
[1] Former v1 cover letter
This serie is aimed at removing the dmaengine slave compat use, and transfer
knowledge of the DMA requestors into architecture code.

This was discussed/advised by Arnd a couple of years back, it's almost time.

The serie is divided in 3 phasees :
 - phase 1 : patch 1/15 and patch 2/15
   => this is the preparation work
 - phase 2 : patches 3/15 .. 10/15
   => this is the switch of all the drivers
   => this one will require either an Ack of the maintainers or be taken by them
      once phase 1 is merged
 - phase 3 : patches 11/15
   => this is the last part, cleanup and removal of export of the DMA filter
      function

As this looks like a patch bomb, each maintainer expressing for his tree either
an Ack or "I want to take through my tree" will be spared in the next iterations
of this serie.

Several of these changes have been tested on actual hardware, including :
 - pxamci
 - pxa_camera
 - smc*
 - ASoC and SSP

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 01/13] dmaengine: pxa: use a dma slave map
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-06-25 13:15   ` Applied "dmaengine: pxa: use a dma slave map" to the asoc tree Mark Brown
  2018-05-24  7:06 ` [PATCH v2 02/13] ARM: pxa: add dma slave map Robert Jarzmik
                   ` (11 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.

This won't impact MMP architecture, but is aimed only at all PXA boards.

This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/pxa_dma.c                 | 10 +++++++++-
 include/linux/platform_data/mmp_dma.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b53fb618bbf6..9505334f9c6e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,6 +179,8 @@ static unsigned int pxad_drcmr(unsigned int line)
 	return 0x1000 + line * 4;
 }
 
+bool pxad_filter_fn(struct dma_chan *chan, void *param);
+
 /*
  * Debug fs
  */
@@ -1396,9 +1398,10 @@ static int pxad_probe(struct platform_device *op)
 {
 	struct pxad_device *pdev;
 	const struct of_device_id *of_id;
+	const struct dma_slave_map *slave_map = NULL;
 	struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
 	struct resource *iores;
-	int ret, dma_channels = 0, nb_requestors = 0;
+	int ret, dma_channels = 0, nb_requestors = 0, slave_map_cnt = 0;
 	const enum dma_slave_buswidth widths =
 		DMA_SLAVE_BUSWIDTH_1_BYTE   | DMA_SLAVE_BUSWIDTH_2_BYTES |
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1429,6 +1432,8 @@ static int pxad_probe(struct platform_device *op)
 	} else if (pdata && pdata->dma_channels) {
 		dma_channels = pdata->dma_channels;
 		nb_requestors = pdata->nb_requestors;
+		slave_map = pdata->slave_map;
+		slave_map_cnt = pdata->slave_map_cnt;
 	} else {
 		dma_channels = 32;	/* default 32 channel */
 	}
@@ -1440,6 +1445,9 @@ static int pxad_probe(struct platform_device *op)
 	pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy;
 	pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg;
 	pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic;
+	pdev->slave.filter.map = slave_map;
+	pdev->slave.filter.mapcnt = slave_map_cnt;
+	pdev->slave.filter.fn = pxad_filter_fn;
 
 	pdev->slave.copy_align = PDMA_ALIGNMENT;
 	pdev->slave.src_addr_widths = widths;
diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index d1397c8ed94e..6397b9c8149a 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -12,9 +12,13 @@
 #ifndef MMP_DMA_H
 #define MMP_DMA_H
 
+struct dma_slave_map;
+
 struct mmp_dma_platdata {
 	int dma_channels;
 	int nb_requestors;
+	int slave_map_cnt;
+	const struct dma_slave_map *slave_map;
 };
 
 #endif /* MMP_DMA_H */
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 02/13] ARM: pxa: add dma slave map
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-05-24 18:11   ` Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need Robert Jarzmik
                   ` (10 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.

This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
---
Since v1: revamped the SSP part, split into pxa25.c, pxa27x.c and
          pxa3xx.c, and add pxa-i2s.
---
 arch/arm/mach-pxa/devices.c | 12 +++---------
 arch/arm/mach-pxa/devices.h |  6 +++++-
 arch/arm/mach-pxa/pxa25x.c  | 41 ++++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-pxa/pxa27x.c  | 42 +++++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-pxa/pxa3xx.c  | 44 +++++++++++++++++++++++++++++++++++++++++++-
 5 files changed, 132 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d7c9a8476d57..1e8915fc340d 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,6 +4,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
 
@@ -1202,11 +1203,6 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 	platform_device_add(pd);
 }
 
-static struct mmp_dma_platdata pxa_dma_pdata = {
-	.dma_channels	= 0,
-	.nb_requestors	= 0,
-};
-
 static struct resource pxa_dma_resource[] = {
 	[0] = {
 		.start	= 0x40000000,
@@ -1233,9 +1229,7 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
 {
-	pxa_dma_pdata.dma_channels = nb_channels;
-	pxa_dma_pdata.nb_requestors = nb_requestors;
-	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
+	pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
 }
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 11263f7c455b..498b07bc6a3e 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,4 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \
+	.prio = PXAD_PRIO_##_prio, .drcmr = _requestor })
+struct mmp_dma_platdata;
+
 extern struct platform_device pxa_device_pmu;
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
@@ -55,7 +59,7 @@ extern struct platform_device pxa3xx_device_gpio;
 extern struct platform_device pxa93x_device_gpio;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
-void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
+void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
 
 struct i2c_pxa_platform_data;
 extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index ba431fad5c47..2d61de41a9d5 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,8 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
@@ -26,6 +28,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -201,6 +204,42 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa_device_asoc_platform,
 };
 
+static const struct dma_slave_map pxa25x_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+	{ "smc911x.0", "rx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc911x.0", "tx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc91x.0", "data", PDMA_FILTER_PARAM(LOWEST, -1) },
+
+	/* PXA25x specific map */
+	{ "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
+	{ "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
+};
+
+static struct mmp_dma_platdata pxa25x_dma_pdata = {
+	.dma_channels	= 16,
+	.nb_requestors	= 40,
+	.slave_map	= pxa25x_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa25x_slave_map),
+};
+
 static int __init pxa25x_init(void)
 {
 	int ret = 0;
@@ -215,7 +254,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
 		if (!of_have_populated_dt()) {
-			pxa2xx_set_dmac_info(16, 40);
+			pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
 			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 			ret = platform_add_devices(pxa25x_devices,
 						   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 0c06f383ad52..b44e3c4f3013 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/gpio-pxa.h>
 #include <linux/module.h>
@@ -23,6 +25,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -297,6 +300,43 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
+static const struct dma_slave_map pxa27x_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+	{ "smc911x.0", "rx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc911x.0", "tx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc91x.0", "data", PDMA_FILTER_PARAM(LOWEST, -1) },
+
+	/* PXA27x specific map */
+	{ "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+	{ "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+	{ "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
+	{ "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
+	{ "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
+};
+
+static struct mmp_dma_platdata pxa27x_dma_pdata = {
+	.dma_channels	= 32,
+	.nb_requestors	= 75,
+	.slave_map	= pxa27x_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa27x_slave_map),
+};
+
 static int __init pxa27x_init(void)
 {
 	int ret = 0;
@@ -313,7 +353,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32, 75);
+			pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4b8a0df8ea57..b5ca4be093ec 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,6 +12,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/dmaengine.h>
+#include <linux/dma/pxa-dma.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,6 +26,7 @@
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/platform_data/mmp_dma.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -421,6 +424,45 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_pwm1,
 };
 
+static const struct dma_slave_map pxa3xx_slave_map[] = {
+	/* PXA25x, PXA27x and PXA3xx common entries */
+	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
+	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
+	  PDMA_FILTER_PARAM(LOWEST, 10) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
+	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
+	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
+	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
+	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
+	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
+	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
+	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
+	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
+	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
+	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
+	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
+	{ "smc911x.0", "rx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc911x.0", "tx", PDMA_FILTER_PARAM(LOWEST, -1) },
+	{ "smc91x.0", "data", PDMA_FILTER_PARAM(LOWEST, -1) },
+
+	/* PXA3xx specific map */
+	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
+	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
+	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
+	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
+	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
+	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
+	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
+};
+
+static struct mmp_dma_platdata pxa3xx_dma_pdata = {
+	.dma_channels	= 32,
+	.nb_requestors	= 100,
+	.slave_map	= pxa3xx_slave_map,
+	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
+};
+
 static int __init pxa3xx_init(void)
 {
 	int ret = 0;
@@ -452,7 +494,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32, 100);
+		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 02/13] ARM: pxa: add dma slave map Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-06-25 13:15   ` Applied "mmc: pxamci: remove the dmaengine compat need" to the asoc tree Mark Brown
  2018-05-24  7:06 ` [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need Robert Jarzmik
                   ` (9 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/host/pxamci.c | 29 +++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index c763b404510f..6c94474e36f4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
@@ -637,10 +636,8 @@ static int pxamci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
-	struct resource *r, *dmarx, *dmatx;
-	struct pxad_param param_rx, param_tx;
+	struct resource *r;
 	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
-	dma_cap_mask_t mask;
 
 	ret = pxamci_of_init(pdev);
 	if (ret)
@@ -739,34 +736,14 @@ static int pxamci_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mmc);
 
-	if (!pdev->dev.of_node) {
-		dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (!dmarx || !dmatx) {
-			ret = -ENXIO;
-			goto out;
-		}
-		param_rx.prio = PXAD_PRIO_LOWEST;
-		param_rx.drcmr = dmarx->start;
-		param_tx.prio = PXAD_PRIO_LOWEST;
-		param_tx.drcmr = dmatx->start;
-	}
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	host->dma_chan_rx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_rx, &pdev->dev, "rx");
+	host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx");
 	if (host->dma_chan_rx == NULL) {
 		dev_err(&pdev->dev, "unable to request rx dma channel\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	host->dma_chan_tx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_tx,  &pdev->dev, "tx");
+	host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx");
 	if (host->dma_chan_tx == NULL) {
 		dev_err(&pdev->dev, "unable to request tx dma channel\n");
 		ret = -ENODEV;
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (2 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-06-25 13:15   ` Applied "media: pxa_camera: remove the dmaengine compat need" to the asoc tree Mark Brown
  2018-05-24  7:06 ` [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need Robert Jarzmik
                   ` (8 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/media/platform/pxa_camera.c | 22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index c71a00736541..4c82d1880753 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2357,8 +2357,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		.src_maxburst = 8,
 		.direction = DMA_DEV_TO_MEM,
 	};
-	dma_cap_mask_t mask;
-	struct pxad_param params;
 	char clk_name[V4L2_CLK_NAME_SIZE];
 	int irq;
 	int err = 0, i;
@@ -2432,34 +2430,20 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	pcdev->base = base;
 
 	/* request dma */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-
-	params.prio = 0;
-	params.drcmr = 68;
-	pcdev->dma_chans[0] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_Y");
+	pcdev->dma_chans[0] = dma_request_slave_channel(&pdev->dev, "CI_Y");
 	if (!pcdev->dma_chans[0]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		return -ENODEV;
 	}
 
-	params.drcmr = 69;
-	pcdev->dma_chans[1] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_U");
+	pcdev->dma_chans[1] = dma_request_slave_channel(&pdev->dev, "CI_U");
 	if (!pcdev->dma_chans[1]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		err = -ENODEV;
 		goto exit_free_dma_y;
 	}
 
-	params.drcmr = 70;
-	pcdev->dma_chans[2] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_V");
+	pcdev->dma_chans[2] = dma_request_slave_channel(&pdev->dev, "CI_V");
 	if (!pcdev->dma_chans[2]) {
 		dev_err(&pdev->dev, "Can't request DMA for V\n");
 		err = -ENODEV;
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (3 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-05-24  9:30   ` Miquel Raynal
  2018-05-24  7:06 ` [PATCH v2 06/13] net: smc911x: " Robert Jarzmik
                   ` (7 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
 1 file changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 10e953218948..f9763be078ef 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2613,8 +2613,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 						    dev);
 	struct dma_slave_config config = {};
 	struct resource *r;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret;
 
 	if (!IS_ENABLED(CONFIG_PXA_DMA)) {
@@ -2627,20 +2625,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	if (ret)
 		return ret;
 
-	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!r) {
-		dev_err(nfc->dev, "No resource defined for data DMA\n");
-		return -ENXIO;
-	}
-
-	param.drcmr = r->start;
-	param.prio = PXAD_PRIO_LOWEST;
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	nfc->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, nfc->dev,
-						 "data");
+	nfc->dma_chan =	dma_request_slave_channel(&nfc->dev, "data");
 	if (!nfc->dma_chan) {
 		dev_err(nfc->dev,
 			"Unable to request data DMA channel\n");
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 06/13] net: smc911x: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (4 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 07/13] net: smc91x: " Robert Jarzmik
                   ` (6 subsequent siblings)
  12 siblings, 0 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/net/ethernet/smsc/smc911x.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 05157442a980..4c3713bd5caa 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -74,7 +74,6 @@ static const char version[] =
 #include <linux/skbuff.h>
 
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 
 #include <asm/io.h>
 
@@ -1794,8 +1793,6 @@ static int smc911x_probe(struct net_device *dev)
 	unsigned long irq_flags;
 #ifdef SMC_USE_DMA
 	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 #endif
 
 	DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__);
@@ -1969,17 +1966,8 @@ static int smc911x_probe(struct net_device *dev)
 
 #ifdef SMC_USE_DMA
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = -1UL;
-
-	lp->rxdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "rx");
-	lp->txdma =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &dev->dev, "tx");
+	lp->rxdma = dma_request_slave_channel(&dev->dev, "rx");
+	lp->txdma = dma_request_slave_channel(&dev->dev, "tx");
 	lp->rxdma_active = 0;
 	lp->txdma_active = 0;
 
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 07/13] net: smc91x: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (5 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 06/13] net: smc911x: " Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
                   ` (5 subsequent siblings)
  12 siblings, 0 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/net/ethernet/smsc/smc91x.c | 12 +-----------
 drivers/net/ethernet/smsc/smc91x.h |  1 -
 2 files changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 080428762858..4c600f430f6d 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2018,18 +2018,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	lp->cfg.flags |= SMC91X_USE_DMA;
 #  endif
 	if (lp->cfg.flags & SMC91X_USE_DMA) {
-		dma_cap_mask_t mask;
-		struct pxad_param param;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		param.prio = PXAD_PRIO_LOWEST;
-		param.drcmr = -1UL;
-
 		lp->dma_chan =
-			dma_request_slave_channel_compat(mask, pxad_filter_fn,
-							 &param, &dev->dev,
-							 "data");
+			dma_request_slave_channel(lp->device, "data");
 	}
 #endif
 
diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index b337ee97e0c0..a27352229fc2 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -301,7 +301,6 @@ struct smc_local {
  * as RX which can overrun memory and lose packets.
  */
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 
 #ifdef SMC_insl
 #undef SMC_insl
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 08/13] ASoC: pxa: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (6 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 07/13] net: smc91x: " Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-05-24 13:58   ` Mark Brown
                     ` (2 more replies)
  2018-05-24  7:06 ` [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need Robert Jarzmik
                   ` (4 subsequent siblings)
  12 siblings, 3 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 sound/arm/pxa2xx-ac97.c     | 14 ++------------
 sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
 sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
 sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
 4 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4bc244c40f80..236a63cdaf9f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_legacy_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_out_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_in_req,
 };
 
 static struct snd_pcm *pxa2xx_ac97_pcm;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index e8da3b8ee721..dcbe7ecc1835 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
 	if (ret < 0)
 		return ret;
 
-	return snd_dmaengine_pcm_open_request_chan(substream,
-					pxad_filter_fn,
-					dma_params->filter_data);
+	return snd_dmaengine_pcm_open(
+		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+						     dma_params->chan_name));
 }
 EXPORT_SYMBOL(__pxa2xx_pcm_open);
 
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 803818aabee9..1b41c0f2a8fb 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_cold_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 10,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_out",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 9,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_in",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 8,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
 	.addr		= __PREG(MCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mic_mono",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
 };
 
 static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 3fb60baf6eab..e7184de0de04 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
 static struct clk *clk_i2s;
 static int clk_ena = 0;
 
-static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "tx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
 };
 
-static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "rx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
 };
 
 static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (7 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
@ 2018-05-24  7:06 ` Robert Jarzmik
  2018-06-25 13:15   ` Applied "ata: pata_pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
  2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
                   ` (3 subsequent siblings)
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:06 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_pxa.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index f6c46e9a4dc0..e8b6a2e464c9 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -25,7 +25,6 @@
 #include <linux/libata.h>
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/completion.h>
@@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	struct resource *irq_res;
 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret = 0;
 
 	/*
@@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 
 	ap->private_data = data;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = pdata->dma_dreq;
 	memset(&config, 0, sizeof(config));
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	 * Request the DMA channel
 	 */
 	data->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &pdev->dev, "data");
+		dma_request_slave_channel(&pdev->dev, "data");
 	if (!data->dma_chan)
 		return -EBUSY;
 	ret = dmaengine_slave_config(data->dma_chan, &config);
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 10/13] dmaengine: pxa: document pxad_param
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (8 preceding siblings ...)
  2018-05-24  7:06 ` [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need Robert Jarzmik
@ 2018-05-24  7:07 ` Robert Jarzmik
  2018-05-25 10:59   ` Vinod
  2018-06-25 13:15   ` Applied "dmaengine: pxa: document pxad_param" to the asoc tree Mark Brown
  2018-05-24  7:07 ` [PATCH v2 11/13] dmaengine: pxa: make the filter function internal Robert Jarzmik
                   ` (2 subsequent siblings)
  12 siblings, 2 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:07 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 include/linux/dma/pxa-dma.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index e56ec7af4fd7..9fc594f69eff 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -9,6 +9,15 @@ enum pxad_chan_prio {
 	PXAD_PRIO_LOWEST,
 };
 
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
 struct pxad_param {
 	unsigned int drcmr;
 	enum pxad_chan_prio prio;
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 11/13] dmaengine: pxa: make the filter function internal
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (9 preceding siblings ...)
  2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
@ 2018-05-24  7:07 ` Robert Jarzmik
  2018-05-25 10:59   ` Vinod
  2018-05-24  7:07 ` [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources Robert Jarzmik
  2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:07 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/dma/pxa_dma.c       |  5 ++---
 include/linux/dma/pxa-dma.h | 11 -----------
 2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 9505334f9c6e..a332ad1d7dfb 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,7 +179,7 @@ static unsigned int pxad_drcmr(unsigned int line)
 	return 0x1000 + line * 4;
 }
 
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
+static bool pxad_filter_fn(struct dma_chan *chan, void *param);
 
 /*
  * Debug fs
@@ -1496,7 +1496,7 @@ static struct platform_driver pxad_driver = {
 	.remove		= pxad_remove,
 };
 
-bool pxad_filter_fn(struct dma_chan *chan, void *param)
+static bool pxad_filter_fn(struct dma_chan *chan, void *param)
 {
 	struct pxad_chan *c = to_pxad_chan(chan);
 	struct pxad_param *p = param;
@@ -1509,7 +1509,6 @@ bool pxad_filter_fn(struct dma_chan *chan, void *param)
 
 	return true;
 }
-EXPORT_SYMBOL_GPL(pxad_filter_fn);
 
 module_platform_driver(pxad_driver);
 
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index 9fc594f69eff..fceb5df07097 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -23,15 +23,4 @@ struct pxad_param {
 	enum pxad_chan_prio prio;
 };
 
-struct dma_chan;
-
-#ifdef CONFIG_PXA_DMA
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
-#else
-static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
-{
-	return false;
-}
-#endif
-
 #endif /* _PXA_DMA_H_ */
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (10 preceding siblings ...)
  2018-05-24  7:07 ` [PATCH v2 11/13] dmaengine: pxa: make the filter function internal Robert Jarzmik
@ 2018-05-24  7:07 ` Robert Jarzmik
  2018-06-25 13:15   ` Applied "ARM: pxa: remove the DMA IO resources" to the asoc tree Mark Brown
  2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
  12 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:07 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

As the last driver using the former mechanism to acquire the DMA
requestor line has be converted to the dma_slave_map, remove all these
resources from the PXA devices.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 arch/arm/mach-pxa/devices.c | 136 --------------------------------------------
 1 file changed, 136 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e8915fc340d..5a16ea74e28a 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -60,16 +60,6 @@ static struct resource pxamci_resources[] = {
 		.end	= IRQ_MMC,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 21,
-		.end	= 21,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 22,
-		.end	= 22,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxamci_dmamask = 0xffffffffUL;
@@ -407,16 +397,6 @@ static struct resource pxa_ir_resources[] = {
 		.end	= 0x40700023,
 		.flags  = IORESOURCE_MEM,
 	},
-	[5] = {
-		.start  = 17,
-		.end	= 17,
-		.flags  = IORESOURCE_DMA,
-	},
-	[6] = {
-		.start  = 18,
-		.end	= 18,
-		.flags  = IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa_device_ficp = {
@@ -545,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_ssp = {
@@ -583,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = {
 		.end	= IRQ_NSSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_nssp = {
@@ -621,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = {
 		.end	= IRQ_ASSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 23,
-		.end	= 23,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 24,
-		.end	= 24,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_assp = {
@@ -751,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp1 = {
@@ -789,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = {
 		.end	= IRQ_SSP2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp2 = {
@@ -827,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = {
 		.end	= IRQ_SSP3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 66,
-		.end	= 66,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 67,
-		.end	= 67,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp3 = {
@@ -895,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = {
 		.end	= IRQ_MMC2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 93,
-		.end	= 93,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 94,
-		.end	= 94,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci2 = {
@@ -934,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = {
 		.end	= IRQ_MMC3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 100,
-		.end	= 100,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 101,
-		.end	= 101,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci3 = {
@@ -1021,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = {
 		.end	= IRQ_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for Data DMA */
-		.start	= 97,
-		.end	= 97,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for Command DMA */
-		.start	= 99,
-		.end	= 99,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
@@ -1066,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = {
 		.end	= IRQ_SSP4,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 /*
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation
  2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
                   ` (11 preceding siblings ...)
  2018-05-24  7:07 ` [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources Robert Jarzmik
@ 2018-05-24  7:07 ` Robert Jarzmik
  2018-05-25  7:56   ` Daniel Mack
  2018-06-25 13:15   ` Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree Mark Brown
  12 siblings, 2 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24  7:07 UTC (permalink / raw)
  To: Daniel Mack, Haojian Zhuang, Robert Jarzmik, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.

This specifically means that :
- for platform data based machines, the DMA requestor channels are
  extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
  ssp.<N>, and the channels are either "rx" or "tx".

- for device tree platforms, the dma node should be hooked into the
  pxa2xx-ac97 or pxa-ssp-dai node.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: Removed channel names from platform_data
---
 arch/arm/plat-pxa/ssp.c    | 47 ----------------------------------------------
 include/linux/pxa2xx_ssp.h |  2 --
 sound/soc/pxa/pxa-ssp.c    |  5 ++---
 3 files changed, 2 insertions(+), 52 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 	if (IS_ERR(ssp->clk))
 		return PTR_ERR(ssp->clk);
 
-	if (dev->of_node) {
-		struct of_phandle_args dma_spec;
-		struct device_node *np = dev->of_node;
-		int ret;
-
-		/*
-		 * FIXME: we should allocate the DMA channel from this
-		 * context and pass the channel down to the ssp users.
-		 * For now, we lookup the rx and tx indices manually
-		 */
-
-		/* rx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 0, &dma_spec);
-
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-
-		/* tx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 1, &dma_spec);
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-	} else {
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (res == NULL) {
-			dev_err(dev, "no SSP RX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = res->start;
-
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (res == NULL) {
-			dev_err(dev, "no SSP TX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = res->start;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
 	int		type;
 	int		use_count;
 	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
 
 	struct device_node	*of_node;
 };
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0291c7cb64eb..e09368d89bbc 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 	dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
 	if (!dma)
 		return -ENOMEM;
-
-	dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-				&ssp->drcmr_tx : &ssp->drcmr_rx;
+	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		"tx" : "rx";
 
 	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
 
-- 
2.11.0

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need
  2018-05-24  7:06 ` [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need Robert Jarzmik
@ 2018-05-24  9:30   ` Miquel Raynal
  2018-05-24 18:07     ` Robert Jarzmik
  0 siblings, 1 reply; 31+ messages in thread
From: Miquel Raynal @ 2018-05-24  9:30 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann, alsa-devel, netdev,
	linux-mmc, linux-kernel, linux-ide, linux-mtd, dmaengine,
	linux-arm-kernel, linux-media

Hi Robert,

On Thu, 24 May 2018 09:06:55 +0200, Robert Jarzmik
<robert.jarzmik@free.fr> wrote:

> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Signed-off-by: Daniel Mack <daniel@zonque.org>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
>  drivers/mtd/nand/raw/marvell_nand.c | 17 +----------------
>  1 file changed, 1 insertion(+), 16 deletions(-)
> 

Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 08/13] ASoC: pxa: remove the dmaengine compat need
  2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
@ 2018-05-24 13:58   ` Mark Brown
  2018-05-25  8:35   ` Daniel Mack
  2018-06-29 11:07   ` Applied "ASoC: pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
  2 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-05-24 13:58 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Arnd Bergmann, linux-arm-kernel, linux-kernel,
	linux-ide, dmaengine, linux-media, linux-mmc, linux-mtd, netdev,
	alsa-devel

[-- Attachment #1: Type: text/plain, Size: 289 bytes --]

On Thu, May 24, 2018 at 09:06:58AM +0200, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need
  2018-05-24  9:30   ` Miquel Raynal
@ 2018-05-24 18:07     ` Robert Jarzmik
  2018-05-25  6:56       ` Miquel Raynal
  0 siblings, 1 reply; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24 18:07 UTC (permalink / raw)
  To: Miquel Raynal, Daniel Mack, Haojian Zhuang, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris
  Cc: linux-kernel, linux-mtd

Miquel Raynal <miquel.raynal@bootlin.com> writes:

> Hi Robert,

Actually, a last time error slipped in this patch here (I'm really doing poorly
on the copy paste side):
+	nfc->dma_chan =	dma_request_slave_channel(&nfc->dev, "data");

This should rather be :
+	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");

Would you grant your ack for the next iteration with this change folded in ?

Cheers.

--
Robert

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 02/13] ARM: pxa: add dma slave map
  2018-05-24  7:06 ` [PATCH v2 02/13] ARM: pxa: add dma slave map Robert Jarzmik
@ 2018-05-24 18:11   ` Robert Jarzmik
  0 siblings, 0 replies; 31+ messages in thread
From: Robert Jarzmik @ 2018-05-24 18:11 UTC (permalink / raw)
  To: Arnd Bergmann, Daniel Mack; +Cc: Haojian Zhuang, linux-arm-kernel, linux-kernel

Robert Jarzmik <robert.jarzmik@free.fr> writes:

> In order to remove the specific knowledge of the dma mapping from PXA
> drivers, add a default slave map for pxa architectures.
>
> This is the first step, and once all drivers are converted,
> pxad_filter_fn() will be made static, and the DMA resources removed from
> device.c.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
> Reported-by: Arnd Bergmann <arnd@arndb.de>
> +	{ "smc911x.0", "rx", PDMA_FILTER_PARAM(LOWEST, -1) },
> +	{ "smc911x.0", "tx", PDMA_FILTER_PARAM(LOWEST, -1) },
> +	{ "smc91x.0", "data", PDMA_FILTER_PARAM(LOWEST, -1) },

Hi Arnd,

Actually after rereading this, I realised that I completely forgot your former
comment about having a NULL parameter for network devices (as there is no
requestor behind).

I will cook it up for v3 ... that will be a minor change in this patch (hence
I'll keep any Ack), but for patches 0006 and 0007, things will change, and
another patch for Vinod will appear.

Cheers.

--
Robert

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need
  2018-05-24 18:07     ` Robert Jarzmik
@ 2018-05-25  6:56       ` Miquel Raynal
  0 siblings, 0 replies; 31+ messages in thread
From: Miquel Raynal @ 2018-05-25  6:56 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, linux-kernel, linux-mtd

Hi Robert,

On Thu, 24 May 2018 20:07:11 +0200, Robert Jarzmik
<robert.jarzmik@free.fr> wrote:

> Miquel Raynal <miquel.raynal@bootlin.com> writes:
> 
> > Hi Robert,  
> 
> Actually, a last time error slipped in this patch here (I'm really doing poorly
> on the copy paste side):
> +	nfc->dma_chan =	dma_request_slave_channel(&nfc->dev, "data");
> 
> This should rather be :
> +	nfc->dma_chan =	dma_request_slave_channel(nfc->dev, "data");
> 
> Would you grant your ack for the next iteration with this change folded in ?

Didn't spot it. But, sure, I'm okay with the changes :)

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation
  2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
@ 2018-05-25  7:56   ` Daniel Mack
  2018-06-25 13:15   ` Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree Mark Brown
  1 sibling, 0 replies; 31+ messages in thread
From: Daniel Mack @ 2018-05-25  7:56 UTC (permalink / raw)
  To: Robert Jarzmik, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

On Thursday, May 24, 2018 09:07 AM, Robert Jarzmik wrote:
> Now the dma_slave_map is available for PXA architecture, switch the SSP
> device to it.
> 
> This specifically means that :
> - for platform data based machines, the DMA requestor channels are
>    extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
>    ssp.<N>, and the channels are either "rx" or "tx".
> 
> - for device tree platforms, the dma node should be hooked into the
>    pxa2xx-ac97 or pxa-ssp-dai node.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Acked-by: Daniel Mack <daniel@zonque.org>


We should, however, merge what's left of this management glue code into 
the users of it, so the dma related properties can be put in the right 
devicetree node.

I'll prepare a patch for that for 4.18. This is a good preparation for 
this round though.


Thanks,
Daniel


> ---
> Since v1: Removed channel names from platform_data
> ---
>   arch/arm/plat-pxa/ssp.c    | 47 ----------------------------------------------
>   include/linux/pxa2xx_ssp.h |  2 --
>   sound/soc/pxa/pxa-ssp.c    |  5 ++---
>   3 files changed, 2 insertions(+), 52 deletions(-)
> 
> diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
> index ba13f793fbce..ed36dcab80f1 100644
> --- a/arch/arm/plat-pxa/ssp.c
> +++ b/arch/arm/plat-pxa/ssp.c
> @@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
>   	if (IS_ERR(ssp->clk))
>   		return PTR_ERR(ssp->clk);
>   
> -	if (dev->of_node) {
> -		struct of_phandle_args dma_spec;
> -		struct device_node *np = dev->of_node;
> -		int ret;
> -
> -		/*
> -		 * FIXME: we should allocate the DMA channel from this
> -		 * context and pass the channel down to the ssp users.
> -		 * For now, we lookup the rx and tx indices manually
> -		 */
> -
> -		/* rx */
> -		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
> -						 0, &dma_spec);
> -
> -		if (ret) {
> -			dev_err(dev, "Can't parse dmas property\n");
> -			return -ENODEV;
> -		}
> -		ssp->drcmr_rx = dma_spec.args[0];
> -		of_node_put(dma_spec.np);
> -
> -		/* tx */
> -		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
> -						 1, &dma_spec);
> -		if (ret) {
> -			dev_err(dev, "Can't parse dmas property\n");
> -			return -ENODEV;
> -		}
> -		ssp->drcmr_tx = dma_spec.args[0];
> -		of_node_put(dma_spec.np);
> -	} else {
> -		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
> -		if (res == NULL) {
> -			dev_err(dev, "no SSP RX DRCMR defined\n");
> -			return -ENODEV;
> -		}
> -		ssp->drcmr_rx = res->start;
> -
> -		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
> -		if (res == NULL) {
> -			dev_err(dev, "no SSP TX DRCMR defined\n");
> -			return -ENODEV;
> -		}
> -		ssp->drcmr_tx = res->start;
> -	}
> -
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	if (res == NULL) {
>   		dev_err(dev, "no memory resource defined\n");
> diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
> index 8461b18e4608..03a7ca46735b 100644
> --- a/include/linux/pxa2xx_ssp.h
> +++ b/include/linux/pxa2xx_ssp.h
> @@ -212,8 +212,6 @@ struct ssp_device {
>   	int		type;
>   	int		use_count;
>   	int		irq;
> -	int		drcmr_rx;
> -	int		drcmr_tx;
>   
>   	struct device_node	*of_node;
>   };
> diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
> index 0291c7cb64eb..e09368d89bbc 100644
> --- a/sound/soc/pxa/pxa-ssp.c
> +++ b/sound/soc/pxa/pxa-ssp.c
> @@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
>   	dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
>   	if (!dma)
>   		return -ENOMEM;
> -
> -	dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
> -				&ssp->drcmr_tx : &ssp->drcmr_rx;
> +	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
> +		"tx" : "rx";
>   
>   	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
>   
> 

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 08/13] ASoC: pxa: remove the dmaengine compat need
  2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
  2018-05-24 13:58   ` Mark Brown
@ 2018-05-25  8:35   ` Daniel Mack
  2018-06-29 11:07   ` Applied "ASoC: pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
  2 siblings, 0 replies; 31+ messages in thread
From: Daniel Mack @ 2018-05-25  8:35 UTC (permalink / raw)
  To: Robert Jarzmik, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann
  Cc: linux-arm-kernel, linux-kernel, linux-ide, dmaengine,
	linux-media, linux-mmc, linux-mtd, netdev, alsa-devel

On Thursday, May 24, 2018 09:06 AM, Robert Jarzmik wrote:
> As the pxa architecture switched towards the dmaengine slave map, the
> old compatibility mechanism to acquire the dma requestor line number and
> priority are not needed anymore.
> 
> This patch simplifies the dma resource acquisition, using the more
> generic function dma_request_slave_channel().
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Reviewed-by: Daniel Mack <daniel@zonque.org>

> ---
>   sound/arm/pxa2xx-ac97.c     | 14 ++------------
>   sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
>   sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
>   sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
>   4 files changed, 12 insertions(+), 46 deletions(-)
> 
> diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
> index 4bc244c40f80..236a63cdaf9f 100644
> --- a/sound/arm/pxa2xx-ac97.c
> +++ b/sound/arm/pxa2xx-ac97.c
> @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_legacy_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_out_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_in_req,
>   };
>   
>   static struct snd_pcm *pxa2xx_ac97_pcm;
> diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
> index e8da3b8ee721..dcbe7ecc1835 100644
> --- a/sound/arm/pxa2xx-pcm-lib.c
> +++ b/sound/arm/pxa2xx-pcm-lib.c
> @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
>   	if (ret < 0)
>   		return ret;
>   
> -	return snd_dmaengine_pcm_open_request_chan(substream,
> -					pxad_filter_fn,
> -					dma_params->filter_data);
> +	return snd_dmaengine_pcm_open(
> +		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
> +						     dma_params->chan_name));
>   }
>   EXPORT_SYMBOL(__pxa2xx_pcm_open);
>   
> diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
> index 803818aabee9..1b41c0f2a8fb 100644
> --- a/sound/soc/pxa/pxa2xx-ac97.c
> +++ b/sound/soc/pxa/pxa2xx-ac97.c
> @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
>   	.reset	= pxa2xx_ac97_cold_reset,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 11,
> -};
> -
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_in",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
> -};
> -
> -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 12,
>   };
>   
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
>   	.addr		= __PREG(PCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "pcm_pcm_stereo_out",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 10,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_out",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 9,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
>   	.addr		= __PREG(MODR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mono_in",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
>   };
>   
> -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
> -	.prio = PXAD_PRIO_LOWEST,
> -	.drcmr = 8,
> -};
>   static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
>   	.addr		= __PREG(MCDR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
> +	.chan_name	= "pcm_aux_mic_mono",
>   	.maxburst	= 16,
> -	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
>   };
>   
>   static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
> diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
> index 3fb60baf6eab..e7184de0de04 100644
> --- a/sound/soc/pxa/pxa2xx-i2s.c
> +++ b/sound/soc/pxa/pxa2xx-i2s.c
> @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
>   static struct clk *clk_i2s;
>   static int clk_ena = 0;
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "tx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
>   };
>   
> -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
>   static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
>   	.addr		= __PREG(SADR),
>   	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
> +	.chan_name	= "rx",
>   	.maxburst	= 32,
> -	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
>   };
>   
>   static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
> 

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 10/13] dmaengine: pxa: document pxad_param
  2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
@ 2018-05-25 10:59   ` Vinod
  2018-06-25 13:15   ` Applied "dmaengine: pxa: document pxad_param" to the asoc tree Mark Brown
  1 sibling, 0 replies; 31+ messages in thread
From: Vinod @ 2018-05-25 10:59 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann, linux-arm-kernel,
	linux-kernel, linux-ide, dmaengine, linux-media, linux-mmc,
	linux-mtd, netdev, alsa-devel

On 24-05-18, 09:07, Robert Jarzmik wrote:
> Add some documentation for the pxad_param structure, and describe the
> contract behind the minimal required priority of a DMA channel.

Acked-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 11/13] dmaengine: pxa: make the filter function internal
  2018-05-24  7:07 ` [PATCH v2 11/13] dmaengine: pxa: make the filter function internal Robert Jarzmik
@ 2018-05-25 10:59   ` Vinod
  0 siblings, 0 replies; 31+ messages in thread
From: Vinod @ 2018-05-25 10:59 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann, linux-arm-kernel,
	linux-kernel, linux-ide, dmaengine, linux-media, linux-mmc,
	linux-mtd, netdev, alsa-devel

On 24-05-18, 09:07, Robert Jarzmik wrote:
> As the pxa architecture and all its related drivers do not rely anymore
> on the filter function, thanks to the slave map conversion, make
> pxad_filter_fn() static, and remove it from the global namespace.

Acked-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree
  2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
  2018-05-25  7:56   ` Daniel Mack
@ 2018-06-25 13:15   ` Mark Brown
  1 sibling, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Daniel Mack, Haojian Zhuang, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann,
	alsa-devel, netdev, linux-mmc, linux-kernel, linux-ide,
	linux-mtd, dmaengine, linux-arm-kernel, linux-media, alsa-devel

The patch

   ARM: pxa: change SSP DMA channels allocation

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From cd31b80736852d34bc1072f3e579a6fd73a244e7 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:17 +0200
Subject: [PATCH] ARM: pxa: change SSP DMA channels allocation

Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.

This specifically means that :
- for platform data based machines, the DMA requestor channels are
  extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
  ssp.<N>, and the channels are either "rx" or "tx".

- for device tree platforms, the dma node should be hooked into the
  pxa2xx-ac97 or pxa-ssp-dai node.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Mack <daniel@zonque.org>
---
 arch/arm/plat-pxa/ssp.c    | 47 --------------------------------------
 include/linux/pxa2xx_ssp.h |  2 --
 sound/soc/pxa/pxa-ssp.c    |  5 ++--
 3 files changed, 2 insertions(+), 52 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 	if (IS_ERR(ssp->clk))
 		return PTR_ERR(ssp->clk);
 
-	if (dev->of_node) {
-		struct of_phandle_args dma_spec;
-		struct device_node *np = dev->of_node;
-		int ret;
-
-		/*
-		 * FIXME: we should allocate the DMA channel from this
-		 * context and pass the channel down to the ssp users.
-		 * For now, we lookup the rx and tx indices manually
-		 */
-
-		/* rx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 0, &dma_spec);
-
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-
-		/* tx */
-		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-						 1, &dma_spec);
-		if (ret) {
-			dev_err(dev, "Can't parse dmas property\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = dma_spec.args[0];
-		of_node_put(dma_spec.np);
-	} else {
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		if (res == NULL) {
-			dev_err(dev, "no SSP RX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_rx = res->start;
-
-		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (res == NULL) {
-			dev_err(dev, "no SSP TX DRCMR defined\n");
-			return -ENODEV;
-		}
-		ssp->drcmr_tx = res->start;
-	}
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
 	int		type;
 	int		use_count;
 	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
 
 	struct device_node	*of_node;
 };
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 6fc986080130..0b441338bdd4 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -105,9 +105,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
 	dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
 	if (!dma)
 		return -ENOMEM;
-
-	dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-				&ssp->drcmr_tx : &ssp->drcmr_rx;
+	dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+		"tx" : "rx";
 
 	snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
 
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "ARM: pxa: remove the DMA IO resources" to the asoc tree
  2018-05-24  7:07 ` [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources Robert Jarzmik
@ 2018-06-25 13:15   ` Mark Brown
  0 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Haojian Zhuang, Ezequiel Garcia, Boris Brezillon,
	David Woodhouse, Brian Norris, Marek Vasut, Richard Weinberger,
	Liam Girdwood, Mark Brown, Arnd Bergmann, alsa-devel, netdev,
	linux-mmc, linux-kernel, linux-ide, linux-mtd, dmaengine,
	linux-arm-kernel, linux-media, alsa-devel

The patch

   ARM: pxa: remove the DMA IO resources

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From b77ed2e6d61d40117272be1b2377c5dfd101e9cd Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:16 +0200
Subject: [PATCH] ARM: pxa: remove the DMA IO resources

As the last driver using the former mechanism to acquire the DMA
requestor line has be converted to the dma_slave_map, remove all these
resources from the PXA devices.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 arch/arm/mach-pxa/devices.c | 136 ------------------------------------
 1 file changed, 136 deletions(-)

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 1e8915fc340d..5a16ea74e28a 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -60,16 +60,6 @@ static struct resource pxamci_resources[] = {
 		.end	= IRQ_MMC,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 21,
-		.end	= 21,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 22,
-		.end	= 22,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxamci_dmamask = 0xffffffffUL;
@@ -407,16 +397,6 @@ static struct resource pxa_ir_resources[] = {
 		.end	= 0x40700023,
 		.flags  = IORESOURCE_MEM,
 	},
-	[5] = {
-		.start  = 17,
-		.end	= 17,
-		.flags  = IORESOURCE_DMA,
-	},
-	[6] = {
-		.start  = 18,
-		.end	= 18,
-		.flags  = IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa_device_ficp = {
@@ -545,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_ssp = {
@@ -583,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = {
 		.end	= IRQ_NSSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_nssp = {
@@ -621,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = {
 		.end	= IRQ_ASSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 23,
-		.end	= 23,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 24,
-		.end	= 24,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa25x_device_assp = {
@@ -751,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = {
 		.end	= IRQ_SSP,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 13,
-		.end	= 13,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 14,
-		.end	= 14,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp1 = {
@@ -789,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = {
 		.end	= IRQ_SSP2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 15,
-		.end	= 15,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 16,
-		.end	= 16,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp2 = {
@@ -827,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = {
 		.end	= IRQ_SSP3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 66,
-		.end	= 66,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 67,
-		.end	= 67,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa27x_device_ssp3 = {
@@ -895,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = {
 		.end	= IRQ_MMC2,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 93,
-		.end	= 93,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 94,
-		.end	= 94,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci2 = {
@@ -934,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = {
 		.end	= IRQ_MMC3,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= 100,
-		.end	= 100,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		.start	= 101,
-		.end	= 101,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 struct platform_device pxa3xx_device_mci3 = {
@@ -1021,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = {
 		.end	= IRQ_NAND,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for Data DMA */
-		.start	= 97,
-		.end	= 97,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for Command DMA */
-		.start	= 99,
-		.end	= 99,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
@@ -1066,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = {
 		.end	= IRQ_SSP4,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 /*
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "dmaengine: pxa: document pxad_param" to the asoc tree
  2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
  2018-05-25 10:59   ` Vinod
@ 2018-06-25 13:15   ` Mark Brown
  1 sibling, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Vinod Koul, Daniel Mack, Haojian Zhuang, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann,
	alsa-devel, netdev, linux-mmc, linux-kernel, linux-ide,
	linux-mtd, dmaengine, linux-arm-kernel, linux-media, alsa-devel

The patch

   dmaengine: pxa: document pxad_param

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From b6d1a17f4729e4fda5740a855da91d202db2c118 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:14 +0200
Subject: [PATCH] dmaengine: pxa: document pxad_param

Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 include/linux/dma/pxa-dma.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index e56ec7af4fd7..9fc594f69eff 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -9,6 +9,15 @@ enum pxad_chan_prio {
 	PXAD_PRIO_LOWEST,
 };
 
+/**
+ * struct pxad_param - dma channel request parameters
+ * @drcmr: requestor line number
+ * @prio: minimal mandatory priority of the channel
+ *
+ * If a requested channel is granted, its priority will be at least @prio,
+ * ie. if PXAD_PRIO_LOW is required, the requested channel will be either
+ * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST.
+ */
 struct pxad_param {
 	unsigned int drcmr;
 	enum pxad_chan_prio prio;
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "ata: pata_pxa: remove the dmaengine compat need" to the asoc tree
  2018-05-24  7:06 ` [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need Robert Jarzmik
@ 2018-06-25 13:15   ` Mark Brown
  0 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Bartlomiej Zolnierkiewicz, Daniel Mack, Haojian Zhuang,
	Ezequiel Garcia, Boris Brezillon, David Woodhouse, Brian Norris,
	Marek Vasut, Richard Weinberger, Liam Girdwood, Mark Brown,
	Arnd Bergmann, alsa-devel, netdev, linux-mmc, linux-kernel,
	linux-ide, linux-mtd, dmaengine, linux-arm-kernel, linux-media,
	alsa-devel

The patch

   ata: pata_pxa: remove the dmaengine compat need

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 273340e8bf86de53eef7073993352ea11c563696 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:13 +0200
Subject: [PATCH] ata: pata_pxa: remove the dmaengine compat need

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/ata/pata_pxa.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
index f6c46e9a4dc0..e8b6a2e464c9 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -25,7 +25,6 @@
 #include <linux/libata.h>
 #include <linux/platform_device.h>
 #include <linux/dmaengine.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/completion.h>
@@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	struct resource *irq_res;
 	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
 	struct dma_slave_config	config;
-	dma_cap_mask_t mask;
-	struct pxad_param param;
 	int ret = 0;
 
 	/*
@@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev)
 
 	ap->private_data = data;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	param.prio = PXAD_PRIO_LOWEST;
-	param.drcmr = pdata->dma_dreq;
 	memset(&config, 0, sizeof(config));
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
 	 * Request the DMA channel
 	 */
 	data->dma_chan =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param, &pdev->dev, "data");
+		dma_request_slave_channel(&pdev->dev, "data");
 	if (!data->dma_chan)
 		return -EBUSY;
 	ret = dmaengine_slave_config(data->dma_chan, &config);
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "media: pxa_camera: remove the dmaengine compat need" to the asoc tree
  2018-05-24  7:06 ` [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need Robert Jarzmik
@ 2018-06-25 13:15   ` Mark Brown
  0 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Hans Verkuil, Mauro Carvalho Chehab, Daniel Mack, Haojian Zhuang,
	Ezequiel Garcia, Boris Brezillon, David Woodhouse, Brian Norris,
	Marek Vasut, Richard Weinberger, Liam Girdwood, Mark Brown,
	Arnd Bergmann, alsa-devel, netdev, linux-mmc, linux-kernel,
	linux-ide, linux-mtd, dmaengine, linux-arm-kernel, linux-media,
	alsa-devel

The patch

   media: pxa_camera: remove the dmaengine compat need

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From f727b6cda449184188d8a64987f194687bf01782 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:08 +0200
Subject: [PATCH] media: pxa_camera: remove the dmaengine compat need

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 drivers/media/platform/pxa_camera.c | 22 +++-------------------
 1 file changed, 3 insertions(+), 19 deletions(-)

diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index d85ffbfb7c1f..b6e9e93bde7a 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -2375,8 +2375,6 @@ static int pxa_camera_probe(struct platform_device *pdev)
 		.src_maxburst = 8,
 		.direction = DMA_DEV_TO_MEM,
 	};
-	dma_cap_mask_t mask;
-	struct pxad_param params;
 	char clk_name[V4L2_CLK_NAME_SIZE];
 	int irq;
 	int err = 0, i;
@@ -2450,34 +2448,20 @@ static int pxa_camera_probe(struct platform_device *pdev)
 	pcdev->base = base;
 
 	/* request dma */
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_cap_set(DMA_PRIVATE, mask);
-
-	params.prio = 0;
-	params.drcmr = 68;
-	pcdev->dma_chans[0] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_Y");
+	pcdev->dma_chans[0] = dma_request_slave_channel(&pdev->dev, "CI_Y");
 	if (!pcdev->dma_chans[0]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		return -ENODEV;
 	}
 
-	params.drcmr = 69;
-	pcdev->dma_chans[1] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_U");
+	pcdev->dma_chans[1] = dma_request_slave_channel(&pdev->dev, "CI_U");
 	if (!pcdev->dma_chans[1]) {
 		dev_err(&pdev->dev, "Can't request DMA for Y\n");
 		err = -ENODEV;
 		goto exit_free_dma_y;
 	}
 
-	params.drcmr = 70;
-	pcdev->dma_chans[2] =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &params, &pdev->dev, "CI_V");
+	pcdev->dma_chans[2] = dma_request_slave_channel(&pdev->dev, "CI_V");
 	if (!pcdev->dma_chans[2]) {
 		dev_err(&pdev->dev, "Can't request DMA for V\n");
 		err = -ENODEV;
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "mmc: pxamci: remove the dmaengine compat need" to the asoc tree
  2018-05-24  7:06 ` [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need Robert Jarzmik
@ 2018-06-25 13:15   ` Mark Brown
  0 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Ulf Hansson, Daniel Mack, Haojian Zhuang, Ezequiel Garcia,
	Boris Brezillon, David Woodhouse, Brian Norris, Marek Vasut,
	Richard Weinberger, Liam Girdwood, Mark Brown, Arnd Bergmann,
	alsa-devel, netdev, linux-mmc, linux-kernel, linux-ide,
	linux-mtd, dmaengine, linux-arm-kernel, linux-media, alsa-devel

The patch

   mmc: pxamci: remove the dmaengine compat need

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 6b3348f9e6eb35d2c2d49ffa274039ef9a901adc Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:07 +0200
Subject: [PATCH] mmc: pxamci: remove the dmaengine compat need

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/host/pxamci.c | 29 +++--------------------------
 1 file changed, 3 insertions(+), 26 deletions(-)

diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index c763b404510f..6c94474e36f4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
-#include <linux/dma/pxa-dma.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mmc/host.h>
@@ -637,10 +636,8 @@ static int pxamci_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
-	struct resource *r, *dmarx, *dmatx;
-	struct pxad_param param_rx, param_tx;
+	struct resource *r;
 	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
-	dma_cap_mask_t mask;
 
 	ret = pxamci_of_init(pdev);
 	if (ret)
@@ -739,34 +736,14 @@ static int pxamci_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mmc);
 
-	if (!pdev->dev.of_node) {
-		dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-		dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-		if (!dmarx || !dmatx) {
-			ret = -ENXIO;
-			goto out;
-		}
-		param_rx.prio = PXAD_PRIO_LOWEST;
-		param_rx.drcmr = dmarx->start;
-		param_tx.prio = PXAD_PRIO_LOWEST;
-		param_tx.drcmr = dmatx->start;
-	}
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-
-	host->dma_chan_rx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_rx, &pdev->dev, "rx");
+	host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx");
 	if (host->dma_chan_rx == NULL) {
 		dev_err(&pdev->dev, "unable to request rx dma channel\n");
 		ret = -ENODEV;
 		goto out;
 	}
 
-	host->dma_chan_tx =
-		dma_request_slave_channel_compat(mask, pxad_filter_fn,
-						 &param_tx,  &pdev->dev, "tx");
+	host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx");
 	if (host->dma_chan_tx == NULL) {
 		dev_err(&pdev->dev, "unable to request tx dma channel\n");
 		ret = -ENODEV;
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "dmaengine: pxa: use a dma slave map" to the asoc tree
  2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
@ 2018-06-25 13:15   ` Mark Brown
  0 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-25 13:15 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Arnd Bergmann, Vinod Koul, Daniel Mack, Haojian Zhuang,
	Ezequiel Garcia, Boris Brezillon, David Woodhouse, Brian Norris,
	Marek Vasut, Richard Weinberger, Liam Girdwood, Mark Brown,
	Arnd Bergmann, alsa-devel, netdev, linux-mmc, linux-kernel,
	linux-ide, linux-mtd, dmaengine, linux-arm-kernel, linux-media,
	alsa-devel

The patch

   dmaengine: pxa: use a dma slave map

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 420c0117db25db38b72b6230223f7a976d3070ea Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sun, 17 Jun 2018 19:02:04 +0200
Subject: [PATCH] dmaengine: pxa: use a dma slave map

In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.

This won't impact MMP architecture, but is aimed only at all PXA boards.

This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/dma/pxa_dma.c                 | 10 +++++++++-
 include/linux/platform_data/mmp_dma.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index b53fb618bbf6..9505334f9c6e 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,6 +179,8 @@ static unsigned int pxad_drcmr(unsigned int line)
 	return 0x1000 + line * 4;
 }
 
+bool pxad_filter_fn(struct dma_chan *chan, void *param);
+
 /*
  * Debug fs
  */
@@ -1396,9 +1398,10 @@ static int pxad_probe(struct platform_device *op)
 {
 	struct pxad_device *pdev;
 	const struct of_device_id *of_id;
+	const struct dma_slave_map *slave_map = NULL;
 	struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev);
 	struct resource *iores;
-	int ret, dma_channels = 0, nb_requestors = 0;
+	int ret, dma_channels = 0, nb_requestors = 0, slave_map_cnt = 0;
 	const enum dma_slave_buswidth widths =
 		DMA_SLAVE_BUSWIDTH_1_BYTE   | DMA_SLAVE_BUSWIDTH_2_BYTES |
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1429,6 +1432,8 @@ static int pxad_probe(struct platform_device *op)
 	} else if (pdata && pdata->dma_channels) {
 		dma_channels = pdata->dma_channels;
 		nb_requestors = pdata->nb_requestors;
+		slave_map = pdata->slave_map;
+		slave_map_cnt = pdata->slave_map_cnt;
 	} else {
 		dma_channels = 32;	/* default 32 channel */
 	}
@@ -1440,6 +1445,9 @@ static int pxad_probe(struct platform_device *op)
 	pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy;
 	pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg;
 	pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic;
+	pdev->slave.filter.map = slave_map;
+	pdev->slave.filter.mapcnt = slave_map_cnt;
+	pdev->slave.filter.fn = pxad_filter_fn;
 
 	pdev->slave.copy_align = PDMA_ALIGNMENT;
 	pdev->slave.src_addr_widths = widths;
diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h
index d1397c8ed94e..6397b9c8149a 100644
--- a/include/linux/platform_data/mmp_dma.h
+++ b/include/linux/platform_data/mmp_dma.h
@@ -12,9 +12,13 @@
 #ifndef MMP_DMA_H
 #define MMP_DMA_H
 
+struct dma_slave_map;
+
 struct mmp_dma_platdata {
 	int dma_channels;
 	int nb_requestors;
+	int slave_map_cnt;
+	const struct dma_slave_map *slave_map;
 };
 
 #endif /* MMP_DMA_H */
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

* Applied "ASoC: pxa: remove the dmaengine compat need" to the asoc tree
  2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
  2018-05-24 13:58   ` Mark Brown
  2018-05-25  8:35   ` Daniel Mack
@ 2018-06-29 11:07   ` Mark Brown
  2 siblings, 0 replies; 31+ messages in thread
From: Mark Brown @ 2018-06-29 11:07 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: Daniel Mack, Mark Brown, Daniel Mack, Haojian Zhuang,
	Ezequiel Garcia, Boris Brezillon, David Woodhouse, Brian Norris,
	Marek Vasut, Richard Weinberger, Liam Girdwood, Mark Brown,
	Arnd Bergmann, alsa-devel, netdev, linux-mmc, linux-kernel,
	linux-ide, linux-mtd, dmaengine, linux-arm-kernel, linux-media,
	alsa-devel

The patch

   ASoC: pxa: remove the dmaengine compat need

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8f54061d001ad2da24dba89fc48adbbf4c85222b Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Thu, 28 Jun 2018 22:08:37 +0200
Subject: [PATCH] ASoC: pxa: remove the dmaengine compat need

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/arm/pxa2xx-ac97.c     | 14 ++------------
 sound/arm/pxa2xx-pcm-lib.c  |  6 +++---
 sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
 sound/soc/pxa/pxa2xx-i2s.c  |  6 ++----
 4 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4bc244c40f80..236a63cdaf9f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_legacy_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_out_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_in_req,
 };
 
 static struct snd_pcm *pxa2xx_ac97_pcm;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index e8da3b8ee721..dcbe7ecc1835 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
 	if (ret < 0)
 		return ret;
 
-	return snd_dmaengine_pcm_open_request_chan(substream,
-					pxad_filter_fn,
-					dma_params->filter_data);
+	return snd_dmaengine_pcm_open(
+		substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+						     dma_params->chan_name));
 }
 EXPORT_SYMBOL(__pxa2xx_pcm_open);
 
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 5738a0abcd6a..c52b33802bf2 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
 	.reset	= pxa2xx_ac97_cold_reset,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 11,
-};
-
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_in",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_in_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 12,
 };
 
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
 	.addr		= __PREG(PCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "pcm_pcm_stereo_out",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_ac97_pcm_stereo_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 10,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_out",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_out_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 9,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
 	.addr		= __PREG(MODR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mono_in",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mono_in_req,
 };
 
-static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
-	.prio = PXAD_PRIO_LOWEST,
-	.drcmr = 8,
-};
 static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
 	.addr		= __PREG(MCDR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_2_BYTES,
+	.chan_name	= "pcm_aux_mic_mono",
 	.maxburst	= 16,
-	.filter_data	= &pxa2xx_ac97_pcm_aux_mic_mono_req,
 };
 
 static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 3fb60baf6eab..e7184de0de04 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
 static struct clk *clk_i2s;
 static int clk_ena = 0;
 
-static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "tx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_out_req,
 };
 
-static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
 static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
 	.addr		= __PREG(SADR),
 	.addr_width	= DMA_SLAVE_BUSWIDTH_4_BYTES,
+	.chan_name	= "rx",
 	.maxburst	= 32,
-	.filter_data	= &pxa2xx_i2s_pcm_stereo_in_req,
 };
 
 static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
-- 
2.18.0.rc2


^ permalink raw reply	[flat|nested] 31+ messages in thread

end of thread, other threads:[~2018-06-29 11:07 UTC | newest]

Thread overview: 31+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-24  7:06 [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 01/13] dmaengine: pxa: use a dma slave map Robert Jarzmik
2018-06-25 13:15   ` Applied "dmaengine: pxa: use a dma slave map" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 02/13] ARM: pxa: add dma slave map Robert Jarzmik
2018-05-24 18:11   ` Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "mmc: pxamci: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "media: pxa_camera: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need Robert Jarzmik
2018-05-24  9:30   ` Miquel Raynal
2018-05-24 18:07     ` Robert Jarzmik
2018-05-25  6:56       ` Miquel Raynal
2018-05-24  7:06 ` [PATCH v2 06/13] net: smc911x: " Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 07/13] net: smc91x: " Robert Jarzmik
2018-05-24  7:06 ` [PATCH v2 08/13] ASoC: pxa: " Robert Jarzmik
2018-05-24 13:58   ` Mark Brown
2018-05-25  8:35   ` Daniel Mack
2018-06-29 11:07   ` Applied "ASoC: pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:06 ` [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need Robert Jarzmik
2018-06-25 13:15   ` Applied "ata: pata_pxa: remove the dmaengine compat need" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 10/13] dmaengine: pxa: document pxad_param Robert Jarzmik
2018-05-25 10:59   ` Vinod
2018-06-25 13:15   ` Applied "dmaengine: pxa: document pxad_param" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 11/13] dmaengine: pxa: make the filter function internal Robert Jarzmik
2018-05-25 10:59   ` Vinod
2018-05-24  7:07 ` [PATCH v2 12/13] ARM: pxa: remove the DMA IO resources Robert Jarzmik
2018-06-25 13:15   ` Applied "ARM: pxa: remove the DMA IO resources" to the asoc tree Mark Brown
2018-05-24  7:07 ` [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation Robert Jarzmik
2018-05-25  7:56   ` Daniel Mack
2018-06-25 13:15   ` Applied "ARM: pxa: change SSP DMA channels allocation" to the asoc tree Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).