LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Radu Pirea <radu.pirea@microchip.com>
To: <broonie@kernel.org>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>, <lee.jones@linaro.org>,
	<richard.genoud@gmail.com>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <gregkh@linuxfoundation.org>
Cc: <linux-spi@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-serial@vger.kernel.org>,
	Radu Pirea <radu.pirea@microchip.com>
Subject: [PATCH v4 2/6] dt-bindings: add binding for atmel-usart in SPI mode
Date: Fri, 25 May 2018 20:19:37 +0300	[thread overview]
Message-ID: <20180525171941.26766-3-radu.pirea@microchip.com> (raw)
In-Reply-To: <20180525171941.26766-1-radu.pirea@microchip.com>

This patch moves the bindings for serial from serial/atmel-usart.txt to
mfd/atmel-usart.txt and adds bindings for USART in SPI mode.

Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
---
 .../bindings/{serial => mfd}/atmel-usart.txt  | 25 +++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/{serial => mfd}/atmel-usart.txt (76%)

diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
similarity index 76%
rename from Documentation/devicetree/bindings/serial/atmel-usart.txt
rename to Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 7c0d6b2f53e4..3b9e18642c3b 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,6 +1,6 @@
 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
-Required properties:
+Required properties for USART:
 - compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
   The compatible <chip> indicated will be the first SoC to support an
   additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties:
 	Required elements: "usart"
 - clocks: phandles to input clocks.
 
-Optional properties:
+Required properties for USART in SPI mode:
+- #size-cells      : Must be <0>
+- #address-cells   : Must be <1>
+- cs-gpios: chipselects (internal cs not supported)
+- atmel,usart-mode : Must be <USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
+
+Optional properties in serial mode:
 - atmel,use-dma-rx: use of PDC or DMA for receiving data
 - atmel,use-dma-tx: use of PDC or DMA for transmitting data
 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example:
 		dma-names = "tx", "rx";
 		atmel,fifo-size = <32>;
 	};
+
+- SPI mode:
+	#include <dt-bindings/mfd/at91-usart.h>
+
+	spi0: spi@f001c000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
+		atmel,usart-mode = <USART_MODE_SPI>;
+		reg = <0xf001c000 0x100>;
+		interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usart0_clk>;
+		clock-names = "usart";
+		cs-gpios = <&pioB 3 0>;
+	};
-- 
2.17.0

  parent reply	other threads:[~2018-05-25 17:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25 17:19 [PATCH v4 0/6] Driver for at91 usart in spi mode Radu Pirea
2018-05-25 17:19 ` [PATCH v4 1/6] MAINTAINERS: add at91 usart mfd driver Radu Pirea
2018-05-25 17:19 ` Radu Pirea [this message]
2018-05-31  1:00   ` [PATCH v4 2/6] dt-bindings: add binding for atmel-usart in SPI mode Rob Herring
2018-06-13  6:11   ` Lee Jones
2018-05-25 17:19 ` [PATCH v4 3/6] mfd: at91-usart: added mfd driver for usart Radu Pirea
2018-05-28  8:00   ` Andy Shevchenko
2018-05-29  9:32     ` Alexandre Belloni
2018-05-31  1:02   ` Rob Herring
2018-05-25 17:19 ` [PATCH v4 4/6] MAINTAINERS: add at91 usart spi driver Radu Pirea
2018-05-25 17:19 ` [PATCH v4 5/6] spi: at91-usart: add driver for at91-usart as spi Radu Pirea
2018-05-28  8:21   ` Andy Shevchenko
2018-05-29 14:28     ` Radu Pirea
2018-05-29 14:34       ` Nicolas Ferre
2018-05-29 14:36         ` Nicolas Ferre
2018-05-25 17:19 ` [PATCH v4 6/6] tty/serial: atmel: changed the driver to work under at91-usart mfd Radu Pirea
2018-05-28 10:08   ` Richard Genoud
2018-05-29  9:15     ` Radu Pirea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180525171941.26766-3-radu.pirea@microchip.com \
    --to=radu.pirea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=richard.genoud@gmail.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v4 2/6] dt-bindings: add binding for atmel-usart in SPI mode' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).