LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 3.18 000/185] 3.18.111-stable review
@ 2018-05-28 10:00 Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 001/185] MIPS: ptrace: Expose FIR register through FP regset Greg Kroah-Hartman
                   ` (175 more replies)
  0 siblings, 176 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

This is the start of the stable review cycle for the 3.18.111 release.
There are 185 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed May 30 10:00:18 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.111-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.111-rc1

Randy Dunlap <rdunlap@infradead.org>
    kdb: make "mdr" command repeat

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix frequency of Release WQE CQEs

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix issue_lip if link is disabled

Richard Haines <richard_c_haines@btinternet.com>
    netlabel: If PF_INET6, check sk_buff ip header version

Richard Guy Briggs <rgb@redhat.com>
    audit: return on memory error to avoid null pointer dereference

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos3250: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos5250: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: exynos5260: Fix PLL rates

Andrzej Hajda <a.hajda@samsung.com>
    clk: samsung: s3c2410: Fix PLL rates

Colin Ian King <colin.king@canonical.com>
    media: cx25821: prevent out-of-bounds read on array card

Jan Kara <jack@suse.cz>
    udf: Provide saner default for invalid uid / gid

Thomas Vincent-Cross <me@tvc.id.au>
    PCI: Add function 1 DMA alias quirk for Marvell 88SE9220

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: arc_uart: Fix out-of-bounds access through DT alias

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: fsl_lpuart: Fix out-of-bounds access through DT alias

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: imx: Fix out-of-bounds access through serial port index

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: samsung: Fix out-of-bounds access through serial port index

Geert Uytterhoeven <geert+renesas@glider.be>
    serial: xuartps: Fix out-of-bounds access through DT alias

Colin Ian King <colin.king@canonical.com>
    rtc: tx4939: avoid unintended sign extension on a 24 bit shift

Colin Ian King <colin.king@canonical.com>
    staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr

Brad Love <brad@nextdimension.cc>
    media: em28xx: USB bulk packet size fix

Qi Hou <qi.hou@windriver.com>
    dmaengine: pl330: fix a race condition in case of threaded irqs

Arnd Bergmann <arnd@arndb.de>
    media: s3c-camif: fix out-of-bounds array access

Brad Love <brad@nextdimension.cc>
    media: cx23885: Set subdev host data to clk_freq pointer

Brad Love <brad@nextdimension.cc>
    media: cx23885: Override 888 ImpactVCBe crystal frequency

Takashi Iwai <tiwai@suse.de>
    ALSA: vmaster: Propagate slave error

Chris Dickens <christopher.a.dickens@gmail.com>
    usb: gadget: composite: fix incorrect handling of OS desc requests

Wolfram Sang <wsa+renesas@sang-engineering.com>
    usb: gadget: udc: change comparison to bitshift when dealing with a mask

Maurizio Lombardi <mlombard@redhat.com>
    cdrom: do not call check_disk_change() inside cdrom_open()

Guenter Roeck <linux@roeck-us.net>
    hwmon: (pmbus/adm1275) Accept negative page register values

Guenter Roeck <linux@roeck-us.net>
    hwmon: (pmbus/max8688) Accept negative page register values

Peter Zijlstra <peterz@infradead.org>
    perf/core: Fix perf_output_read_group()

Mathieu Malaterre <malat@debian.org>
    powerpc: Add missing prototype for arch_irq_work_raise()

Lars-Peter Clausen <lars@metafoo.de>
    usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS

Grigor Tovmasyan <Grigor.Tovmasyan@synopsys.com>
    usb: dwc2: Fix interval type issue

Rafael J. Wysocki <rjw@rjwysocki.net>
    PCI: Restore config space on runtime resume despite being unbound

Mathias Kresin <dev@kresin.me>
    MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: zero usb device slot_id member when disabling and freeing a xhci slot

Gregory CLEMENT <gregory.clement@bootlin.com>
    i2c: mv64xxx: Apply errata delay only in standard mode

Seunghun Han <kkamagui@gmail.com>
    ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c

Erik Schmauss <erik.schmauss@intel.com>
    ACPICA: Events: add a return on failure from acpi_hw_register_read

Coly Li <colyli@suse.de>
    bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set

Michael Schmitz <schmitzmic@gmail.com>
    zorro: Set up z->dev.dma_mask for the DMA API

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields

Philipp Puschmann <pp@emlix.com>
    arm: dts: socfpga: fix GIC PPI warning

Jay Vosburgh <jay.vosburgh@canonical.com>
    virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS

Petr Vorel <pvorel@suse.cz>
    ima: Fallback to the builtin hash algorithm

Karthikeyan Periyasamy <periyasa@codeaurora.org>
    ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)

Leon Romanovsky <leonro@mellanox.com>
    net/mlx5: Protect from command bit overflow

Frank Asseg <frank.asseg@objecthunter.net>
    tools/thermal: tmon: fix for segfault

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/perf: Fix kernel address leak via sampling registers

Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
    powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer

Guenter Roeck <linux@roeck-us.net>
    hwmon: (nct6775) Fix writing pwmX_mode

Helge Deller <deller@gmx.de>
    parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode

Greg Ungerer <gerg@linux-m68k.org>
    m68k: set dma and coherent masks for platform FEC ethernets

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/mpic: Check if cpu_possible() in mpic_physmask()

Lenny Szubowicz <lszubowi@redhat.com>
    ACPI: acpi_pad: Fix memory leak in power saving threads

Dan Carpenter <dan.carpenter@oracle.com>
    xen/acpi: off by one in read_acpi_id()

Jeff Mahoney <jeffm@suse.com>
    btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix copy_items() return value when logging an inode

Qu Wenruo <wqu@suse.com>
    btrfs: tests/qgroup: Fix wrong tree backref level

David S. Miller <davem@davemloft.net>
    sparc64: Make atomic_xchg() an inline function rather than a macro.

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: VMX: raise internal error for exception during invalid protected mode state

Davidlohr Bueso <dave@stgolabs.net>
    sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning

Nikolay Borisov <nborisov@suse.com>
    btrfs: Fix possible softlock on single core machines

Liu Bo <bo.liu@linux.alibaba.com>
    Btrfs: fix NULL pointer dereference in log_dir_items

Liu Bo <bo.liu@linux.alibaba.com>
    Btrfs: bail out on error during replay_dir_deletes

Huang Ying <ying.huang@intel.com>
    mm: fix races between address_space dereference and free in page_evicatable

Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
    mm/ksm: fix interaction with THP

Esben Haabendal <eha@deif.com>
    dp83640: Ensure against premature access to PHY registers after reset

Dave Carroll <david.carroll@microsemi.com>
    scsi: aacraid: Insure command thread is not recursively stopped

Carlos Maiolino <cmaiolino@redhat.com>
    Force log to disk before reading the AGF during a fstrim

Jens Axboe <axboe@kernel.dk>
    sr: get/drop reference to device in revalidate and check_events

Tom Abraham <tabraham@suse.com>
    swap: divide-by-zero when zero length swap file on ssd

Danilo Krummrich <danilokrummrich@dk-develop.de>
    fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table

Rich Felker <dalias@libc.org>
    sh: fix debug trap failure to process signals before return to user

Yelena Krivosheev <yelena@marvell.com>
    net: mvneta: fix enable of all initialized RXQs

Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
    net: Fix untag for vlan packets without ethernet header

Cong Wang <xiyou.wangcong@gmail.com>
    llc: properly handle dev_queue_xmit() return value

Giuseppe Lippolis <giu.lippolis@gmail.com>
    net-usb: add qmi_wwan if on lte modem wistron neweb d18q1

Pawel Dembicki <paweldembicki@gmail.com>
    net: qmi_wwan: add BroadMobi BM806U 2020:2033

Linus Lüssing <linus.luessing@c0d3.blue>
    batman-adv: fix packet loss for broadcasted DHCP packets to a server

Linus Lüssing <linus.luessing@c0d3.blue>
    batman-adv: fix multicast-via-unicast transmission with AP isolation

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: ftrace: Add a testcase for probepoint

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: ftrace: Add a testcase for string type with kprobe_event

Masami Hiramatsu <mhiramat@kernel.org>
    selftests: ftrace: Add probe event argument syntax testcase

Yisheng Xie <xieyisheng1@huawei.com>
    mm/mempolicy.c: avoid use uninitialized preferred_node

Stefano Brivio <sbrivio@redhat.com>
    vti4: Don't override MTU passed on link creation via IFLA_MTU

Stefano Brivio <sbrivio@redhat.com>
    vti4: Don't count header length twice on tunnel setup

Matthias Schiffer <mschiffer@universe-factory.net>
    batman-adv: fix header size check in batadv_dbg_arp()

Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
    net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off

Rob Herring <robh@kernel.org>
    microblaze: switch to NO_BOOTMEM

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: fix erroneous reject of last rule

Fredrik Noring <noring@nocrew.org>
    USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM

Arvind Yadav <arvind.yadav.cs@gmail.com>
    xen: xenbus: use put_device() instead of kfree()

Peter Malone <peter.malone@gmail.com>
    fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().

Jeremy Cline <jeremy@jcline.org>
    scsi: sd: Keep disk read-only when re-reading partition

Merlijn Wajer <merlijn@wizzup.org>
    usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers

Pierre-Yves Kerbrat <pkerbrat@kalray.eu>
    e1000e: allocate ring descriptors with dma_zalloc_coherent

Benjamin Poirier <bpoirier@suse.com>
    e1000e: Fix check_for_link return value with autoneg off

Igor Pylypiv <igor.pylypiv@gmail.com>
    watchdog: f71808e_wdt: Fix magic close handling

Filipe Manana <fdmanana@suse.com>
    Btrfs: send, fix issuing write op when processing hole in no data mode

Roger Pau Monne <roger.pau@citrix.com>
    xen/pirq: fix error path cleanup when binding MSIs

Joey Pabalinas <joeypabalinas@gmail.com>
    net/tcp/illinois: replace broken algorithm reference link

Xin Long <lucien.xin@gmail.com>
    sit: fix IFLA_MTU ignored on NEWLINK

Tang Junhui <tang.junhui@zte.com.cn>
    bcache: fix kcrashes with fio in RAID5 backend dev

Eric Dumazet <edumazet@google.com>
    r8152: fix tx packets accounting

Colin Ian King <colin.king@canonical.com>
    clocksource/drivers/fsl_ftm_timer: Fix error return checking

Florian Westphal <fw@strlen.de>
    netfilter: ebtables: convert BUG_ONs to WARN_ONs

Matthias Schiffer <mschiffer@universe-factory.net>
    batman-adv: invalidate checksum on fragment reassembly

Matthias Schiffer <mschiffer@universe-factory.net>
    batman-adv: fix packet checksum in receive path

Yufen Yu <yuyufen@huawei.com>
    md/raid1: fix NULL pointer dereference

Mauro Carvalho Chehab <mchehab@s-opensource.com>
    media: dmxdev: fix error code for invalid ioctls

Samuel Neves <sneves@dei.uc.pt>
    x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations

Andrea Parri <parri.andrea@gmail.com>
    locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs

Johannes Berg <johannes.berg@intel.com>
    regulatory: add NUL to request alpha2

Eric Dumazet <edumazet@google.com>
    smsc75xx: fix smsc75xx_set_features()

Tony Lindgren <tony@atomide.com>
    ARM: OMAP: Fix dmtimer init for omap1

Sebastian Ott <sebott@linux.vnet.ibm.com>
    s390/cio: clear timer when terminating driver I/O

Sebastian Ott <sebott@linux.vnet.ibm.com>
    s390/cio: fix return code after missing interrupt

David Rientjes <rientjes@google.com>
    kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE

Andrea Parri <parri.andrea@gmail.com>
    locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()

Markus Elfring <elfring@users.sourceforge.net>
    drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions

Wolfram Sang <wsa+renesas@sang-engineering.com>
    drm/exynos: fix comparison to bitshift when dealing with a mask

Yufen Yu <yuyufen@huawei.com>
    md raid10: fix NULL deference in handle_write_completed()

Felix Fietkau <nbd@nbd.name>
    mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4

Kees Cook <keescook@chromium.org>
    NFC: llcp: Limit size of SDP URI

Geert Uytterhoeven <geert+renesas@glider.be>
    ARM: OMAP1: clock: Fix debugfs_create_*() usage

Tony Lindgren <tony@atomide.com>
    ARM: OMAP3: Fix prm wake interrupt for resume

Manish Rangankar <manish.rangankar@cavium.com>
    scsi: qla4xxx: skip error recovery in case of register disconnect.

Meelis Roos <mroos@linux.ee>
    scsi: aacraid: fix shutdown crash when init fails

Anders Roxell <anders.roxell@linaro.org>
    selftests: memfd: add config fragment for fuse

Stefan Agner <stefan@agner.ch>
    usb: gadget: fsl_udc_core: fix ep valid checks

John Keeping <john@metanate.com>
    usb: gadget: f_uac2: fix bFirstInterface in composite gadget

Bart Van Assche <bart.vanassche@wdc.com>
    scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()

Dan Carpenter <dan.carpenter@oracle.com>
    scsi: sym53c8xx_2: iterator underflow in sym_getsync()

Chad Dupuis <chad.dupuis@cavium.com>
    scsi: bnx2fc: Fix check in SCSI completion handler for timed out request

Sujit Reddy Thumma <sthumma@codeaurora.org>
    scsi: ufs: Enable quirk to ignore sending WRITE_SAME command

Mark Salter <msalter@redhat.com>
    irqchip/gic-v3: Change pr_debug message to pr_devel

Tang Junhui <tang.junhui@zte.com.cn>
    bcache: return attach error when no cache set exist

Tang Junhui <tang.junhui@zte.com.cn>
    bcache: fix for data collapse after re-attaching an attached device

Tang Junhui <tang.junhui@zte.com.cn>
    bcache: fix for allocator and register thread race

Coly Li <colyli@suse.de>
    bcache: properly set task state in bch_writeback_thread()

Arnd Bergmann <arnd@arndb.de>
    cifs: silence compiler warnings showing up with gcc-8.0.0

Alexey Dobriyan <adobriyan@gmail.com>
    proc: fix /proc/*/map_files lookup

Ross Lagerwall <ross.lagerwall@citrix.com>
    xen/grant-table: Use put_page instead of free_page

Matt Redfearn <matt.redfearn@mips.com>
    MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS

Chen Yu <yu.c.chen@intel.com>
    ACPI: processor_perflib: Do not send _PPC change notification if not ready

Jean Delvare <jdelvare@suse.de>
    firmware: dmi_scan: Fix handling of empty DMI strings

Arnd Bergmann <arnd@arndb.de>
    x86/power: Fix swsusp_arch_resume prototype

Alex Estrin <alex.estrin@intel.com>
    IB/ipoib: Fix for potential no-carrier state

Mel Gorman <mgorman@techsingularity.net>
    mm: pin address_space before dereferencing it while isolating an LRU page

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    asm-generic: provide generic_pmdp_establish()

Yisheng Xie <xieyisheng1@huawei.com>
    mm/mempolicy: add nodes_empty check in SYSC_migrate_pages

Yisheng Xie <xieyisheng1@huawei.com>
    mm/mempolicy: fix the check of nodemask from user

piaojun <piaojun@huawei.com>
    ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute

piaojun <piaojun@huawei.com>
    ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid

Leon Romanovsky <leonro@mellanox.com>
    RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure

Jake Daryll Obina <jake.obina@gmail.com>
    jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path

Dan Carpenter <dan.carpenter@oracle.com>
    HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()

Arnd Bergmann <arnd@arndb.de>
    scsi: fas216: fix sense buffer initialization

Nikolay Borisov <nborisov@suse.com>
    btrfs: Fix out of bounds access in btrfs_search_slot

Ulf Magnusson <ulfalizer@gmail.com>
    kconfig: Fix expr_free() E_NOT leak

Ulf Magnusson <ulfalizer@gmail.com>
    kconfig: Fix automatic menu creation mem leak

Ulf Magnusson <ulfalizer@gmail.com>
    kconfig: Don't leak main menus during parsing

Guenter Roeck <linux@roeck-us.net>
    watchdog: sp5100_tco: Fix watchdog disable bit

Jan Chochol <jan@chochol.info>
    nfs: Do not convert nfs_idmap_cache_timeout to jiffies

mulhern <amulhern@redhat.com>
    dm thin: fix documentation relative to low water mark threshold

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tools lib traceevent: Fix get_field_str() for dynamic strings

Alex Williamson <alex.williamson@redhat.com>
    PCI: Add function 1 DMA alias quirk for Marvell 9128

Anna-Maria Gleixner <anna-maria@linutronix.de>
    tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account

Paolo Bonzini <pbonzini@redhat.com>
    kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl

Dan Carpenter <dan.carpenter@oracle.com>
    ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()

Hector Martin <marcan@marcan.st>
    firewire-ohci: work around oversized DMA reads on JMicron controllers

zhongjiang <zhongjiang@huawei.com>
    kernel/signal.c: avoid undefined behaviour in kill_something_info

Joe Jin <joe.jin@oracle.com>
    xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent

Tejun Heo <tj@kernel.org>
    libata: Blacklist some Sandisk SSDs for NCQ

Al Viro <viro@zeniv.linux.org.uk>
    do d_instantiate/unlock_new_inode combinations safely

Al Viro <viro@zeniv.linux.org.uk>
    aio: fix io_destroy(2) vs. lookup_ioctx() race

Al Viro <viro@zeniv.linux.org.uk>
    affs_lookup(): close a race with affs_remove_link()

Colin Ian King <colin.king@canonical.com>
    KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"

Maciej W. Rozycki <macro@mips.com>
    MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs

Maciej W. Rozycki <macro@mips.com>
    MIPS: ptrace: Expose FIR register through FP regset


-------------

Diffstat:

 Documentation/device-mapper/thin-provisioning.txt  |  8 +-
 Makefile                                           |  4 +-
 arch/alpha/include/asm/xchg.h                      | 30 +++++--
 arch/arm/boot/dts/socfpga.dtsi                     |  2 +-
 arch/arm/mach-omap1/clock.c                        |  6 +-
 arch/arm/mach-omap2/pm.c                           |  4 +-
 arch/arm/plat-omap/dmtimer.c                       |  7 +-
 arch/m68k/coldfire/device.c                        | 12 ++-
 arch/microblaze/Kconfig                            |  1 +
 arch/microblaze/mm/init.c                          | 56 ++-----------
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h     |  2 +-
 arch/mips/kernel/ptrace.c                          | 22 ++++-
 arch/mips/kernel/ptrace32.c                        |  4 +-
 arch/mips/kvm/mips.c                               |  2 +-
 arch/mips/txx9/rbtx4939/setup.c                    |  4 +-
 arch/powerpc/include/asm/irq_work.h                |  1 +
 arch/powerpc/perf/core-book3s.c                    | 25 ++++++
 arch/powerpc/sysdev/mpic.c                         |  2 +-
 arch/sh/kernel/entry-common.S                      |  2 +-
 arch/sparc/include/asm/atomic_64.h                 |  6 +-
 arch/x86/kernel/smpboot.c                          |  1 +
 arch/x86/kvm/vmx.c                                 | 20 +++--
 arch/x86/kvm/x86.c                                 |  7 +-
 arch/x86/power/hibernate_32.c                      |  2 +-
 arch/x86/power/hibernate_64.c                      |  2 +-
 drivers/acpi/acpi_pad.c                            |  3 +
 drivers/acpi/acpica/evevent.c                      |  9 +-
 drivers/acpi/acpica/nseval.c                       |  8 ++
 drivers/acpi/processor_perflib.c                   |  2 +-
 drivers/ata/libata-core.c                          |  4 +
 drivers/block/paride/pcd.c                         |  2 +
 drivers/cdrom/cdrom.c                              |  3 -
 drivers/cdrom/gdrom.c                              |  3 +
 drivers/clk/samsung/clk-exynos3250.c               |  4 +-
 drivers/clk/samsung/clk-exynos5250.c               |  8 +-
 drivers/clk/samsung/clk-exynos5260.c               |  2 +-
 drivers/clk/samsung/clk-s3c2410.c                  | 16 ++--
 drivers/clocksource/fsl_ftm_timer.c                |  2 +-
 drivers/dma/pl330.c                                |  6 +-
 drivers/firewire/ohci.c                            |  8 +-
 drivers/firmware/dmi_scan.c                        | 22 ++---
 drivers/gpu/drm/exynos/exynos_drm_g2d.c            |  6 +-
 drivers/gpu/drm/exynos/regs-fimc.h                 |  2 +-
 drivers/hid/hid-roccat-kovaplus.c                  |  2 +
 drivers/hwmon/nct6775.c                            | 10 +--
 drivers/hwmon/pmbus/adm1275.c                      |  4 +-
 drivers/hwmon/pmbus/max8688.c                      |  2 +-
 drivers/i2c/busses/i2c-mv64xxx.c                   |  8 +-
 drivers/ide/ide-cd.c                               |  2 +
 drivers/infiniband/hw/mlx5/qp.c                    |  5 +-
 drivers/infiniband/ulp/ipoib/ipoib_main.c          |  3 +
 drivers/irqchip/irq-gic-v3.c                       |  2 +-
 drivers/md/bcache/alloc.c                          |  4 +-
 drivers/md/bcache/bcache.h                         |  2 +-
 drivers/md/bcache/btree.c                          |  9 +-
 drivers/md/bcache/request.c                        |  2 +-
 drivers/md/bcache/super.c                          | 23 +++--
 drivers/md/bcache/sysfs.c                          | 11 ++-
 drivers/md/bcache/writeback.c                      | 27 ++++--
 drivers/md/raid1.c                                 | 11 +++
 drivers/md/raid10.c                                |  6 +-
 drivers/media/dvb-core/dmxdev.c                    |  2 +-
 drivers/media/pci/cx23885/cx23885-cards.c          |  4 +
 drivers/media/pci/cx23885/cx23885-core.c           | 10 +++
 drivers/media/pci/cx25821/cx25821-core.c           |  7 +-
 drivers/media/platform/s3c-camif/camif-capture.c   |  7 +-
 drivers/media/usb/em28xx/em28xx.h                  |  2 +-
 drivers/message/fusion/mptctl.c                    |  2 +
 drivers/net/ethernet/intel/e1000e/ich8lan.c        |  2 +-
 drivers/net/ethernet/intel/e1000e/mac.c            |  2 +-
 drivers/net/ethernet/intel/e1000e/netdev.c         |  4 +-
 drivers/net/ethernet/marvell/mvneta.c              |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c      |  2 +-
 drivers/net/phy/dp83640.c                          | 18 ++++
 drivers/net/usb/qmi_wwan.c                         |  4 +
 drivers/net/usb/r8152.c                            |  2 +-
 drivers/net/usb/smsc75xx.c                         |  7 +-
 drivers/net/virtio_net.c                           |  2 +-
 drivers/net/wireless/ath/ath10k/mac.c              | 10 +++
 drivers/parisc/lba_pci.c                           | 20 ++++-
 drivers/pci/pci-driver.c                           | 17 ++--
 drivers/pci/quirks.c                               |  5 ++
 drivers/regulator/of_regulator.c                   |  1 +
 drivers/rtc/rtc-tx4939.c                           |  6 +-
 drivers/s390/cio/device_fsm.c                      |  7 +-
 drivers/s390/cio/io_sch.h                          |  1 +
 drivers/scsi/aacraid/commsup.c                     |  4 +-
 drivers/scsi/aacraid/linit.c                       |  5 +-
 drivers/scsi/arm/fas216.c                          |  2 +-
 drivers/scsi/bnx2fc/bnx2fc_io.c                    |  1 +
 drivers/scsi/lpfc/lpfc_attr.c                      |  5 ++
 drivers/scsi/lpfc/lpfc_hbadisc.c                   |  5 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |  2 +
 drivers/scsi/qla2xxx/qla_isr.c                     |  6 +-
 drivers/scsi/qla4xxx/ql4_def.h                     |  2 +
 drivers/scsi/qla4xxx/ql4_os.c                      | 46 ++++++++++
 drivers/scsi/sd.c                                  |  3 +-
 drivers/scsi/sr.c                                  | 21 ++++-
 drivers/scsi/sym53c8xx_2/sym_hipd.c                |  2 +-
 drivers/scsi/ufs/ufshcd.c                          |  2 +
 drivers/staging/rtl8192u/r8192U_core.c             |  2 +
 drivers/tty/serial/arc_uart.c                      |  5 ++
 drivers/tty/serial/fsl_lpuart.c                    |  4 +
 drivers/tty/serial/imx.c                           |  6 ++
 drivers/tty/serial/samsung.c                       |  4 +
 drivers/tty/serial/xilinx_uartps.c                 |  2 +-
 drivers/usb/dwc2/core.h                            |  2 +-
 drivers/usb/dwc3/core.h                            |  2 +
 drivers/usb/gadget/composite.c                     | 40 +++++----
 drivers/usb/gadget/function/f_fs.c                 |  2 +-
 drivers/usb/gadget/function/f_uac2.c               |  2 +
 drivers/usb/gadget/udc/fsl_udc_core.c              |  4 +-
 drivers/usb/gadget/udc/goku_udc.h                  |  2 +-
 drivers/usb/host/ohci-hcd.c                        |  3 +-
 drivers/usb/host/xhci-mem.c                        |  2 +
 drivers/usb/musb/musb_core.c                       |  2 +
 drivers/video/fbdev/sbuslib.c                      |  4 +-
 drivers/watchdog/f71808e_wdt.c                     |  3 +-
 drivers/watchdog/sp5100_tco.h                      |  2 +-
 drivers/xen/events/events_base.c                   |  4 +-
 drivers/xen/grant-table.c                          |  4 +-
 drivers/xen/swiotlb-xen.c                          |  2 +-
 drivers/xen/xen-acpi-processor.c                   |  6 +-
 drivers/xen/xenbus/xenbus_probe.c                  |  5 +-
 drivers/zorro/zorro.c                              | 12 +++
 fs/affs/namei.c                                    | 10 ++-
 fs/aio.c                                           |  4 +-
 fs/btrfs/ctree.c                                   | 12 ++-
 fs/btrfs/disk-io.c                                 |  2 +-
 fs/btrfs/extent-tree.c                             |  1 +
 fs/btrfs/inode.c                                   | 16 +---
 fs/btrfs/send.c                                    |  3 +
 fs/btrfs/tests/qgroup-tests.c                      |  2 +-
 fs/btrfs/tree-log.c                                | 12 ++-
 fs/cifs/cifssmb.c                                  |  4 +-
 fs/dcache.c                                        | 22 +++++
 fs/ecryptfs/inode.c                                |  3 +-
 fs/ext2/namei.c                                    |  6 +-
 fs/ext4/namei.c                                    |  6 +-
 fs/f2fs/namei.c                                    | 12 +--
 fs/jffs2/dir.c                                     | 12 +--
 fs/jffs2/fs.c                                      |  1 -
 fs/jfs/namei.c                                     | 12 +--
 fs/nfs/nfs4sysctl.c                                |  2 +-
 fs/nilfs2/namei.c                                  |  6 +-
 fs/ocfs2/acl.c                                     |  6 ++
 fs/ocfs2/super.c                                   |  5 +-
 fs/ocfs2/xattr.c                                   |  2 +
 fs/proc/base.c                                     | 29 ++++++-
 fs/proc/proc_sysctl.c                              |  3 +
 fs/reiserfs/namei.c                                | 12 +--
 fs/udf/namei.c                                     |  6 +-
 fs/udf/super.c                                     |  5 +-
 fs/ufs/namei.c                                     |  6 +-
 fs/xfs/xfs_discard.c                               | 14 ++--
 include/asm-generic/pgtable.h                      | 15 ++++
 include/linux/dcache.h                             |  1 +
 include/linux/suspend.h                            |  2 +
 include/linux/usb/composite.h                      |  3 +
 include/net/llc_conn.h                             |  2 +-
 include/net/mac80211.h                             |  2 +-
 include/net/regulatory.h                           |  2 +-
 include/trace/events/timer.h                       | 20 ++++-
 include/uapi/linux/if_ether.h                      |  1 +
 kernel/audit.c                                     |  2 +
 kernel/debug/kdb/kdb_main.c                        | 27 ++++--
 kernel/events/core.c                               |  3 +-
 kernel/power/power.h                               |  3 -
 kernel/relay.c                                     |  2 +-
 kernel/sched/rt.c                                  |  2 +
 kernel/signal.c                                    |  4 +
 mm/ksm.c                                           | 28 +++++++
 mm/mempolicy.c                                     | 36 ++++++--
 mm/swapfile.c                                      |  4 +
 mm/vmscan.c                                        | 22 ++++-
 net/batman-adv/distributed-arp-table.c             |  2 +-
 net/batman-adv/fragmentation.c                     |  3 +-
 net/batman-adv/gateway_client.c                    |  3 +
 net/batman-adv/multicast.c                         |  4 +-
 net/batman-adv/soft-interface.c                    |  8 +-
 net/bridge/netfilter/ebtables.c                    | 33 +++++---
 net/core/skbuff.c                                  |  9 +-
 net/ipv4/ip_vti.c                                  |  2 -
 net/ipv4/tcp_illinois.c                            |  2 +-
 net/ipv6/sit.c                                     |  7 ++
 net/llc/llc_c_ac.c                                 | 15 ++--
 net/llc/llc_conn.c                                 | 32 +++++--
 net/netlabel/netlabel_unlabeled.c                  | 10 +++
 net/nfc/llcp_commands.c                            |  4 +
 net/nfc/netlink.c                                  |  3 +-
 scripts/kconfig/expr.c                             |  2 +-
 scripts/kconfig/menu.c                             |  1 +
 scripts/kconfig/zconf.y                            | 33 ++++++--
 security/integrity/ima/ima_crypto.c                |  2 +
 security/integrity/ima/ima_main.c                  | 13 +++
 sound/core/vmaster.c                               |  5 +-
 sound/soc/au1x/ac97c.c                             |  6 +-
 tools/lib/traceevent/parse-filter.c                | 10 ++-
 .../ftrace/test.d/kprobe/kprobe_args_string.tc     | 46 ++++++++++
 .../ftrace/test.d/kprobe/kprobe_args_syntax.tc     | 97 ++++++++++++++++++++++
 .../selftests/ftrace/test.d/kprobe/probepoint.tc   | 43 ++++++++++
 tools/testing/selftests/memfd/config               |  1 +
 tools/thermal/tmon/sysfs.c                         | 12 +--
 tools/thermal/tmon/tmon.c                          |  1 -
 204 files changed, 1228 insertions(+), 450 deletions(-)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 001/185] MIPS: ptrace: Expose FIR register through FP regset
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 002/185] MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs Greg Kroah-Hartman
                   ` (174 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, James Hogan, Maciej W. Rozycki,
	Ralf Baechle, linux-mips

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@mips.com>

commit 71e909c0cdad28a1df1fa14442929e68615dee45 upstream.

Correct commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
and expose the FIR register using the unused 4 bytes at the end of the
NT_PRFPREG regset.  Without that register included clients cannot use
the PTRACE_GETREGSET request to retrieve the complete FPU register set
and have to resort to one of the older interfaces, either PTRACE_PEEKUSR
or PTRACE_GETFPREGS, to retrieve the missing piece of data.  Also the
register is irreversibly missing from core dumps.

This register is architecturally hardwired and read-only so the write
path does not matter.  Ignore data supplied on writes then.

Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.")
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.13+
Patchwork: https://patchwork.linux-mips.org/patch/19273/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -444,7 +444,7 @@ static int fpr_get_msa(struct task_struc
 /*
  * Copy the floating-point context to the supplied NT_PRFPREG buffer.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR and FIR registers separately.
  */
 static int fpr_get(struct task_struct *target,
 		   const struct user_regset *regset,
@@ -452,6 +452,7 @@ static int fpr_get(struct task_struct *t
 		   void *kbuf, void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	int err;
 
 	if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t))
@@ -464,6 +465,12 @@ static int fpr_get(struct task_struct *t
 	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpu.fcr31,
 				  fcr31_pos, fcr31_pos + sizeof(u32));
+	if (err)
+		return err;
+
+	err = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  &boot_cpu_data.fpu_id,
+				  fir_pos, fir_pos + sizeof(u32));
 
 	return err;
 }
@@ -512,7 +519,8 @@ static int fpr_set_msa(struct task_struc
 /*
  * Copy the supplied NT_PRFPREG buffer to the floating-point context.
  * Choose the appropriate helper for general registers, and then copy
- * the FCSR register separately.
+ * the FCSR register separately.  Ignore the incoming FIR register
+ * contents though, as the register is read-only.
  *
  * We optimize for the case where `count % sizeof(elf_fpreg_t) == 0',
  * which is supposed to have been guaranteed by the kernel before
@@ -526,6 +534,7 @@ static int fpr_set(struct task_struct *t
 		   const void *kbuf, const void __user *ubuf)
 {
 	const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t);
+	const int fir_pos = fcr31_pos + sizeof(u32);
 	u32 fcr31;
 	int err;
 
@@ -551,6 +560,11 @@ static int fpr_set(struct task_struct *t
 		target->thread.fpu.fcr31 = fcr31 & ~FPU_CSR_ALL_X;
 	}
 
+	if (count > 0)
+		err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						fir_pos,
+						fir_pos + sizeof(u32));
+
 	return err;
 }
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 002/185] MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 001/185] MIPS: ptrace: Expose FIR register through FP regset Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 003/185] KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable" Greg Kroah-Hartman
                   ` (173 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maciej W. Rozycki, Ralf Baechle,
	linux-mips, James Hogan

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej W. Rozycki <macro@mips.com>

commit 9a3a92ccfe3620743d4ae57c987dc8e9c5f88996 upstream.

Check the TIF_32BIT_FPREGS task setting of the tracee rather than the
tracer in determining the layout of floating-point general registers in
the floating-point context, correcting access to odd-numbered registers
for o32 tracees where the setting disagrees between the two processes.

Fixes: 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries")
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/ptrace.c   |    4 ++--
 arch/mips/kernel/ptrace32.c |    4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -702,7 +702,7 @@ long arch_ptrace(struct task_struct *chi
 			fregs = get_fpu_regs(child);
 
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -796,7 +796,7 @@ long arch_ptrace(struct task_struct *chi
 				child->thread.fpu.fcr31 = 0;
 			}
 #ifdef CONFIG_32BIT
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -97,7 +97,7 @@ long compat_arch_ptrace(struct task_stru
 				break;
 			}
 			fregs = get_fpu_regs(child);
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even
@@ -203,7 +203,7 @@ long compat_arch_ptrace(struct task_stru
 				       sizeof(child->thread.fpu));
 				child->thread.fpu.fcr31 = 0;
 			}
-			if (test_thread_flag(TIF_32BIT_FPREGS)) {
+			if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) {
 				/*
 				 * The odd registers are actually the high
 				 * order bits of the values stored in the even

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 003/185] KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 001/185] MIPS: ptrace: Expose FIR register through FP regset Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 002/185] MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 004/185] affs_lookup(): close a race with affs_remove_link() Greg Kroah-Hartman
                   ` (172 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Ralf Baechle,
	linux-mips, kernel-janitors, James Hogan

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit ba3696e94d9d590d9a7e55f68e81c25dba515191 upstream.

Trivial fix to spelling mistake in debugfs_entries text.

Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-janitors@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kvm/mips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_en
 	{ "cache",	  VCPU_STAT(cache_exits),	 KVM_STAT_VCPU },
 	{ "signal",	  VCPU_STAT(signal_exits),	 KVM_STAT_VCPU },
 	{ "interrupt",	  VCPU_STAT(int_exits),		 KVM_STAT_VCPU },
-	{ "cop_unsuable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
+	{ "cop_unusable", VCPU_STAT(cop_unusable_exits), KVM_STAT_VCPU },
 	{ "tlbmod",	  VCPU_STAT(tlbmod_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_ld",	  VCPU_STAT(tlbmiss_ld_exits),	 KVM_STAT_VCPU },
 	{ "tlbmiss_st",	  VCPU_STAT(tlbmiss_st_exits),	 KVM_STAT_VCPU },

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 004/185] affs_lookup(): close a race with affs_remove_link()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (2 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 003/185] KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable" Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 005/185] aio: fix io_destroy(2) vs. lookup_ioctx() race Greg Kroah-Hartman
                   ` (171 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Sterba, Al Viro

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 30da870ce4a4e007c901858a96e9e394a1daa74a upstream.

we unlock the directory hash too early - if we are looking at secondary
link and primary (in another directory) gets removed just as we unlock,
we could have the old primary moved in place of the secondary, leaving
us to look into freed entry (and leaving our dentry with ->d_fsdata
pointing to a freed entry).

Cc: stable@vger.kernel.org # 2.4.4+
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/affs/namei.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -224,9 +224,10 @@ affs_lookup(struct inode *dir, struct de
 
 	affs_lock_dir(dir);
 	bh = affs_find_entry(dir, dentry);
-	affs_unlock_dir(dir);
-	if (IS_ERR(bh))
+	if (IS_ERR(bh)) {
+		affs_unlock_dir(dir);
 		return ERR_CAST(bh);
+	}
 	if (bh) {
 		u32 ino = bh->b_blocknr;
 
@@ -240,10 +241,13 @@ affs_lookup(struct inode *dir, struct de
 		}
 		affs_brelse(bh);
 		inode = affs_iget(sb, ino);
-		if (IS_ERR(inode))
+		if (IS_ERR(inode)) {
+			affs_unlock_dir(dir);
 			return ERR_CAST(inode);
+		}
 	}
 	d_add(dentry, inode);
+	affs_unlock_dir(dir);
 	return NULL;
 }
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 005/185] aio: fix io_destroy(2) vs. lookup_ioctx() race
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (3 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 004/185] affs_lookup(): close a race with affs_remove_link() Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 007/185] libata: Blacklist some Sandisk SSDs for NCQ Greg Kroah-Hartman
                   ` (170 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit baf10564fbb66ea222cae66fbff11c444590ffd9 upstream.

kill_ioctx() used to have an explicit RCU delay between removing the
reference from ->ioctx_table and percpu_ref_kill() dropping the refcount.
At some point that delay had been removed, on the theory that
percpu_ref_kill() itself contained an RCU delay.  Unfortunately, that was
the wrong kind of RCU delay and it didn't care about rcu_read_lock() used
by lookup_ioctx().  As the result, we could get ctx freed right under
lookup_ioctx().  Tejun has fixed that in a6d7cff472e ("fs/aio: Add explicit
RCU grace period when freeing kioctx"); however, that fix is not enough.

Suppose io_destroy() from one thread races with e.g. io_setup() from another;
CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2
has picked it (under rcu_read_lock()).  Then CPU1 proceeds to drop the
refcount, getting it to 0 and triggering a call of free_ioctx_users(),
which proceeds to drop the secondary refcount and once that reaches zero
calls free_ioctx_reqs().  That does
        INIT_RCU_WORK(&ctx->free_rwork, free_ioctx);
        queue_rcu_work(system_wq, &ctx->free_rwork);
and schedules freeing the whole thing after RCU delay.

In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the
refcount from 0 to 1 and returned the reference to io_setup().

Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get
freed until after percpu_ref_get().  Sure, we'd increment the counter before
ctx can be freed.  Now we are out of rcu_read_lock() and there's nothing to
stop freeing of the whole thing.  Unfortunately, CPU2 assumes that since it
has grabbed the reference, ctx is *NOT* going away until it gets around to
dropping that reference.

The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss.
It's not costlier than what we currently do in normal case, it's safe to
call since freeing *is* delayed and it closes the race window - either
lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users
won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx()
fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see
the object in question at all.

Cc: stable@kernel.org
Fixes: a6d7cff472e "fs/aio: Add explicit RCU grace period when freeing kioctx"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/aio.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1006,8 +1006,8 @@ static struct kioctx *lookup_ioctx(unsig
 
 	ctx = rcu_dereference(table->table[id]);
 	if (ctx && ctx->user_id == ctx_id) {
-		percpu_ref_get(&ctx->users);
-		ret = ctx;
+		if (percpu_ref_tryget_live(&ctx->users))
+			ret = ctx;
 	}
 out:
 	rcu_read_unlock();

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 007/185] libata: Blacklist some Sandisk SSDs for NCQ
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (4 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 005/185] aio: fix io_destroy(2) vs. lookup_ioctx() race Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 008/185] xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent Greg Kroah-Hartman
                   ` (169 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Tejun Heo, Dave Jones

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 322579dcc865b94b47345ad1b6002ad167f85405 upstream.

Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up
regularly under sustained moderate load with NCQ enabled.  Blacklist
for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4188,6 +4188,10 @@ static const struct ata_blacklist_entry
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
 	{ "C300-CTFDDAC128MAG",	"0001",		ATA_HORKAGE_NONCQ, },
 
+	/* Some Sandisk SSDs lock up hard with NCQ enabled.  Reported on
+	   SD7SN6S256G and SD8SN8U256G */
+	{ "SanDisk SD[78]SN*G",	NULL,		ATA_HORKAGE_NONCQ, },
+
 	/* devices which puke on READ_NATIVE_MAX */
 	{ "HDS724040KLSA80",	"KFAOA20N",	ATA_HORKAGE_BROKEN_HPA, },
 	{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 008/185] xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (5 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 007/185] libata: Blacklist some Sandisk SSDs for NCQ Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 009/185] kernel/signal.c: avoid undefined behaviour in kill_something_info Greg Kroah-Hartman
                   ` (168 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Joe Jin, John Sobecki, Rzeszutek Wilk

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Jin <joe.jin@oracle.com>

commit 4855c92dbb7b3b85c23e88ab7ca04f99b9677b41 upstream.

When run raidconfig from Dom0 we found that the Xen DMA heap is reduced,
but Dom Heap is increased by the same size. Tracing raidconfig we found
that the related ioctl() in megaraid_sas will call dma_alloc_coherent()
to apply memory. If the memory allocated by Dom0 is not in the DMA area,
it will exchange memory with Xen to meet the requiment. Later drivers
call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent()
the check condition (dev_addr + size - 1 <= dma_mask) is always false,
it prevents calling xen_destroy_contiguous_region() to return the memory
to the Xen DMA heap.

This issue introduced by commit 6810df88dcfc2 "xen-swiotlb: When doing
coherent alloc/dealloc check before swizzling the MFNs.".

Signed-off-by: Joe Jin <joe.jin@oracle.com>
Tested-by: John Sobecki <john.sobecki@oracle.com>
Reviewed-by: Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/swiotlb-xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -366,7 +366,7 @@ xen_swiotlb_free_coherent(struct device
 	 * physical address */
 	phys = xen_bus_to_phys(dev_addr);
 
-	if (((dev_addr + size - 1 > dma_mask)) ||
+	if (((dev_addr + size - 1 <= dma_mask)) ||
 	    range_straddles_page_boundary(phys, size))
 		xen_destroy_contiguous_region(phys, order);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 009/185] kernel/signal.c: avoid undefined behaviour in kill_something_info
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (6 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 008/185] xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 010/185] firewire-ohci: work around oversized DMA reads on JMicron controllers Greg Kroah-Hartman
                   ` (167 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, zhongjiang, Oleg Nesterov,
	Michal Hocko, Vlastimil Babka, Xishi Qiu, Andrew Morton,
	Linus Torvalds, Guenter Roeck

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: zhongjiang <zhongjiang@huawei.com>

commit 4ea77014af0d6205b05503d1c7aac6eace11d473 upstream.

When running kill(72057458746458112, 0) in userspace I hit the following
issue.

  UBSAN: Undefined behaviour in kernel/signal.c:1462:11
  negation of -2147483648 cannot be represented in type 'int':
  CPU: 226 PID: 9849 Comm: test Tainted: G    B          ---- -------   3.10.0-327.53.58.70.x86_64_ubsan+ #116
  Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014
  Call Trace:
    dump_stack+0x19/0x1b
    ubsan_epilogue+0xd/0x50
    __ubsan_handle_negate_overflow+0x109/0x14e
    SYSC_kill+0x43e/0x4d0
    SyS_kill+0xe/0x10
    system_call_fastpath+0x16/0x1b

Add code to avoid the UBSAN detection.

[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/signal.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1435,6 +1435,10 @@ static int kill_something_info(int sig,
 		return ret;
 	}
 
+	/* -INT_MIN is undefined.  Exclude this case to avoid a UBSAN warning */
+	if (pid == INT_MIN)
+		return -ESRCH;
+
 	read_lock(&tasklist_lock);
 	if (pid != -1) {
 		ret = __kill_pgrp_info(sig, info,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 010/185] firewire-ohci: work around oversized DMA reads on JMicron controllers
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (7 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 009/185] kernel/signal.c: avoid undefined behaviour in kill_something_info Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 011/185] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read() Greg Kroah-Hartman
                   ` (166 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hector Martin, Clemens Ladisch,
	Stefan Richter, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 188775181bc05f29372b305ef96485840e351fde ]

At least some JMicron controllers issue buggy oversized DMA reads when
fetching context descriptors, always fetching 0x20 bytes at once for
descriptors which are only 0x10 bytes long. This is often harmless, but
can cause page faults on modern systems with IOMMUs:

DMAR: [DMA Read] Request device [05:00.0] fault addr fff56000 [fault reason 06] PTE Read access is not set
firewire_ohci 0000:05:00.0: DMA context IT0 has stopped, error code: evt_descriptor_read

This works around the problem by always leaving 0x10 padding bytes at
the end of descriptor buffer pages, which should be harmless to do
unconditionally for controllers in case others have the same behavior.

Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firewire/ohci.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1137,7 +1137,13 @@ static int context_add_buffer(struct con
 		return -ENOMEM;
 
 	offset = (void *)&desc->buffer - (void *)desc;
-	desc->buffer_size = PAGE_SIZE - offset;
+	/*
+	 * Some controllers, like JMicron ones, always issue 0x20-byte DMA reads
+	 * for descriptors, even 0x10-byte ones. This can cause page faults when
+	 * an IOMMU is in use and the oversized read crosses a page boundary.
+	 * Work around this by always leaving at least 0x10 bytes of padding.
+	 */
+	desc->buffer_size = PAGE_SIZE - offset - 0x10;
 	desc->buffer_bus = bus_addr + offset;
 	desc->used = 0;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 011/185] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (8 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 010/185] firewire-ohci: work around oversized DMA reads on JMicron controllers Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 013/185] tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account Greg Kroah-Hartman
                   ` (165 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Mark Brown, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 123af9043e93cb6f235207d260d50f832cdb5439 ]

The loop timeout doesn't work because it's a post op and ends with "tmo"
set to -1.  I changed it from a post-op to a pre-op and I changed the
initial the starting value from 5 to 6 so we still iterate 5 times.  I
left the other as it was because it's a large number.

Fixes: b3c70c9ea62a ("ASoC: Alchemy AC97C/I2SC audio support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/au1x/ac97c.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/sound/soc/au1x/ac97c.c
+++ b/sound/soc/au1x/ac97c.c
@@ -91,8 +91,8 @@ static unsigned short au1xac97c_ac97_rea
 	do {
 		mutex_lock(&ctx->lock);
 
-		tmo = 5;
-		while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+		tmo = 6;
+		while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo)
 			udelay(21);	/* wait an ac97 frame time */
 		if (!tmo) {
 			pr_debug("ac97rd timeout #1\n");
@@ -105,7 +105,7 @@ static unsigned short au1xac97c_ac97_rea
 		 * poll, Forrest, poll...
 		 */
 		tmo = 0x10000;
-		while ((RD(ctx, AC97_STATUS) & STAT_CP) && tmo--)
+		while ((RD(ctx, AC97_STATUS) & STAT_CP) && --tmo)
 			asm volatile ("nop");
 		data = RD(ctx, AC97_CMDRESP);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 013/185] tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (9 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 011/185] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read() Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 014/185] PCI: Add function 1 DMA alias quirk for Marvell 9128 Greg Kroah-Hartman
                   ` (164 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Anna-Maria Gleixner,
	Christoph Hellwig, John Stultz, Linus Torvalds, Peter Zijlstra,
	Thomas Gleixner, keescook, Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anna-Maria Gleixner <anna-maria@linutronix.de>

[ Upstream commit 91633eed73a3ac37aaece5c8c1f93a18bae616a9 ]

So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as
well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for
detecting the ABS or REL timer modes is not valid anymore, it got broken
by the introduction of HRTIMER_MODE_PINNED.

HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the
sake of completeness print all given modes.

Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/trace/events/timer.h |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

--- a/include/trace/events/timer.h
+++ b/include/trace/events/timer.h
@@ -121,6 +121,20 @@ DEFINE_EVENT(timer_class, timer_cancel,
 	TP_ARGS(timer)
 );
 
+#define decode_clockid(type)						\
+	__print_symbolic(type,						\
+		{ CLOCK_REALTIME,	"CLOCK_REALTIME"	},	\
+		{ CLOCK_MONOTONIC,	"CLOCK_MONOTONIC"	},	\
+		{ CLOCK_BOOTTIME,	"CLOCK_BOOTTIME"	},	\
+		{ CLOCK_TAI,		"CLOCK_TAI"		})
+
+#define decode_hrtimer_mode(mode)					\
+	__print_symbolic(mode,						\
+		{ HRTIMER_MODE_ABS,		"ABS"		},	\
+		{ HRTIMER_MODE_REL,		"REL"		},	\
+		{ HRTIMER_MODE_ABS_PINNED,	"ABS|PINNED"	},	\
+		{ HRTIMER_MODE_REL_PINNED,	"REL|PINNED"	})
+
 /**
  * hrtimer_init - called when the hrtimer is initialized
  * @hrtimer:	pointer to struct hrtimer
@@ -147,10 +161,8 @@ TRACE_EVENT(hrtimer_init,
 	),
 
 	TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
-		  __entry->clockid == CLOCK_REALTIME ?
-			"CLOCK_REALTIME" : "CLOCK_MONOTONIC",
-		  __entry->mode == HRTIMER_MODE_ABS ?
-			"HRTIMER_MODE_ABS" : "HRTIMER_MODE_REL")
+		  decode_clockid(__entry->clockid),
+		  decode_hrtimer_mode(__entry->mode))
 );
 
 /**

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 014/185] PCI: Add function 1 DMA alias quirk for Marvell 9128
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (10 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 013/185] tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 015/185] tools lib traceevent: Fix get_field_str() for dynamic strings Greg Kroah-Hartman
                   ` (163 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Binarus, Alex Williamson,
	Bjorn Helgaas, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit aa008206634363ef800fbd5f0262016c9ff81dea ]

The Marvell 9128 is the original device generating bug 42679, from which
many other Marvell DMA alias quirks have been sourced, but we didn't have
positive confirmation of the fix on 9128 until now.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Link: https://www.spinics.net/lists/kvm/msg161459.html
Reported-by: Binarus <lists@binarus.de>
Tested-by: Binarus <lists@binarus.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3559,6 +3559,8 @@ static void quirk_dma_func1_alias(struct
  */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
 			 quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
+			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
 			 quirk_dma_func1_alias);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 015/185] tools lib traceevent: Fix get_field_str() for dynamic strings
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (11 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 014/185] PCI: Add function 1 DMA alias quirk for Marvell 9128 Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 016/185] dm thin: fix documentation relative to low water mark threshold Greg Kroah-Hartman
                   ` (162 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Gopanapalli Pradeep, Steven Rostedt,
	Namhyung Kim, Andrew Morton, Arnaldo Carvalho de Melo,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit d777f8de99b05d399c0e4e51cdce016f26bd971b ]

If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.

Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/lib/traceevent/parse-filter.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/tools/lib/traceevent/parse-filter.c
+++ b/tools/lib/traceevent/parse-filter.c
@@ -1867,17 +1867,25 @@ static const char *get_field_str(struct
 	struct pevent *pevent;
 	unsigned long long addr;
 	const char *val = NULL;
+	unsigned int size;
 	char hex[64];
 
 	/* If the field is not a string convert it */
 	if (arg->str.field->flags & FIELD_IS_STRING) {
 		val = record->data + arg->str.field->offset;
+		size = arg->str.field->size;
+
+		if (arg->str.field->flags & FIELD_IS_DYNAMIC) {
+			addr = *(unsigned int *)val;
+			val = record->data + (addr & 0xffff);
+			size = addr >> 16;
+		}
 
 		/*
 		 * We need to copy the data since we can't be sure the field
 		 * is null terminated.
 		 */
-		if (*(val + arg->str.field->size - 1)) {
+		if (*(val + size - 1)) {
 			/* copy it */
 			memcpy(arg->str.buffer, val, arg->str.field->size);
 			/* the buffer is already NULL terminated */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 016/185] dm thin: fix documentation relative to low water mark threshold
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (12 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 015/185] tools lib traceevent: Fix get_field_str() for dynamic strings Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:00 ` [PATCH 3.18 017/185] nfs: Do not convert nfs_idmap_cache_timeout to jiffies Greg Kroah-Hartman
                   ` (161 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, mulhern, Mike Snitzer, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: mulhern <amulhern@redhat.com>

[ Upstream commit 9b28a1102efc75d81298198166ead87d643a29ce ]

Fixes:
1. The use of "exceeds" when the opposite of exceeds, falls below,
was meant.
2. Properly speaking, a table can not exceed a threshold.

It emphasizes the important point, which is that it is the userspace
daemon's responsibility to check for low free space when a device
is resumed, since it won't get a special event indicating low free
space in that situation.

Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/device-mapper/thin-provisioning.txt |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -112,9 +112,11 @@ $low_water_mark is expressed in blocks o
 free space on the data device drops below this level then a dm event
 will be triggered which a userspace daemon should catch allowing it to
 extend the pool device.  Only one such event will be sent.
-Resuming a device with a new table itself triggers an event so the
-userspace daemon can use this to detect a situation where a new table
-already exceeds the threshold.
+
+No special event is triggered if a just resumed device's free space is below
+the low water mark. However, resuming a device always triggers an
+event; a userspace daemon should verify that free space exceeds the low
+water mark when handling this event.
 
 A low water mark for the metadata device is maintained in the kernel and
 will trigger a dm event if free space on the metadata device drops below

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 017/185] nfs: Do not convert nfs_idmap_cache_timeout to jiffies
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (13 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 016/185] dm thin: fix documentation relative to low water mark threshold Greg Kroah-Hartman
@ 2018-05-28 10:00 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 019/185] kconfig: Dont leak main menus during parsing Greg Kroah-Hartman
                   ` (160 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jan Chochol, Trond Myklebust, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Chochol <jan@chochol.info>

[ Upstream commit cbebc6ef4fc830f4040d4140bf53484812d5d5d9 ]

Since commit 57e62324e469 ("NFS: Store the legacy idmapper result in the
keyring") nfs_idmap_cache_timeout changed units from jiffies to seconds.
Unfortunately sysctl interface was not updated accordingly.

As a effect updating /proc/sys/fs/nfs/idmap_cache_timeout with some
value will incorrectly multiply this value by HZ.
Also reading /proc/sys/fs/nfs/idmap_cache_timeout will show real value
divided by HZ.

Fixes: 57e62324e469 ("NFS: Store the legacy idmapper result in the keyring")
Signed-off-by: Jan Chochol <jan@chochol.info>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4sysctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4sysctl.c
+++ b/fs/nfs/nfs4sysctl.c
@@ -31,7 +31,7 @@ static struct ctl_table nfs4_cb_sysctls[
 		.data = &nfs_idmap_cache_timeout,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = proc_dointvec_jiffies,
+		.proc_handler = proc_dointvec,
 	},
 	{ }
 };

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 019/185] kconfig: Dont leak main menus during parsing
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (14 preceding siblings ...)
  2018-05-28 10:00 ` [PATCH 3.18 017/185] nfs: Do not convert nfs_idmap_cache_timeout to jiffies Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 020/185] kconfig: Fix automatic menu creation mem leak Greg Kroah-Hartman
                   ` (159 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ulf Magnusson, Masahiro Yamada, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit 0724a7c32a54e3e50d28e19e30c59014f61d4e2c ]

If a 'mainmenu' entry appeared in the Kconfig files, two things would
leak:

	- The 'struct property' allocated for the default "Linux Kernel
	  Configuration" prompt.

	- The string for the T_WORD/T_WORD_QUOTE prompt after the
	  T_MAINMENU token, allocated on the heap in zconf.l.

To fix it, introduce a new 'no_mainmenu_stmt' nonterminal that matches
if there's no 'mainmenu' and adds the default prompt. That means the
prompt only gets allocated once regardless of whether there's a
'mainmenu' statement or not, and managing it becomes simple.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 344,568 bytes in 14,352 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 344,440 bytes in 14,350 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kconfig/zconf.y |   33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -102,7 +102,27 @@ static struct menu *current_menu, *curre
 %%
 input: nl start | start;
 
-start: mainmenu_stmt stmt_list | stmt_list;
+start: mainmenu_stmt stmt_list | no_mainmenu_stmt stmt_list;
+
+/* mainmenu entry */
+
+mainmenu_stmt: T_MAINMENU prompt nl
+{
+	menu_add_prompt(P_MENU, $2, NULL);
+};
+
+/* Default main menu, if there's no mainmenu entry */
+
+no_mainmenu_stmt: /* empty */
+{
+	/*
+	 * Hack: Keep the main menu title on the heap so we can safely free it
+	 * later regardless of whether it comes from the 'prompt' in
+	 * mainmenu_stmt or here
+	 */
+	menu_add_prompt(P_MENU, strdup("Linux Kernel Configuration"), NULL);
+};
+
 
 stmt_list:
 	  /* empty */
@@ -339,13 +359,6 @@ if_block:
 	| if_block choice_stmt
 ;
 
-/* mainmenu entry */
-
-mainmenu_stmt: T_MAINMENU prompt nl
-{
-	menu_add_prompt(P_MENU, $2, NULL);
-};
-
 /* menu entry */
 
 menu: T_MENU prompt T_EOL
@@ -486,6 +499,7 @@ word_opt: /* empty */			{ $$ = NULL; }
 
 void conf_parse(const char *name)
 {
+	const char *tmp;
 	struct symbol *sym;
 	int i;
 
@@ -493,7 +507,6 @@ void conf_parse(const char *name)
 
 	sym_init();
 	_menu_init();
-	rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
 
 	if (getenv("ZCONF_DEBUG"))
 		zconfdebug = 1;
@@ -503,8 +516,10 @@ void conf_parse(const char *name)
 	if (!modules_sym)
 		modules_sym = sym_find( "n" );
 
+	tmp = rootmenu.prompt->text;
 	rootmenu.prompt->text = _(rootmenu.prompt->text);
 	rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text);
+	free((char*)tmp);
 
 	menu_finalize(&rootmenu);
 	for_all_symbols(i, sym) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 020/185] kconfig: Fix automatic menu creation mem leak
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (15 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 019/185] kconfig: Dont leak main menus during parsing Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 021/185] kconfig: Fix expr_free() E_NOT leak Greg Kroah-Hartman
                   ` (158 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ulf Magnusson, Masahiro Yamada, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit ae7440ef0c8013d68c00dad6900e7cce5311bb1c ]

expr_trans_compare() always allocates and returns a new expression,
giving the following leak outline:

	...
	*Allocate*
	basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
	...
	for (menu = parent->next; menu; menu = menu->next) {
		...
		*Copy*
		dep2 = expr_copy(basedep);
		...
		*Free copy*
		expr_free(dep2);
	}
	*basedep lost!*

Fix by freeing 'basedep' after the loop.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 344,376 bytes in 14,349 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 44,448 bytes in 1,852 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kconfig/menu.c |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -364,6 +364,7 @@ void menu_finalize(struct menu *parent)
 			menu->parent = parent;
 			last_menu = menu;
 		}
+		expr_free(basedep);
 		if (last_menu) {
 			parent->list = parent->next;
 			parent->next = last_menu->next;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 021/185] kconfig: Fix expr_free() E_NOT leak
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (16 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 020/185] kconfig: Fix automatic menu creation mem leak Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 022/185] btrfs: Fix out of bounds access in btrfs_search_slot Greg Kroah-Hartman
                   ` (157 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ulf Magnusson, Masahiro Yamada, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Magnusson <ulfalizer@gmail.com>

[ Upstream commit 5b1374b3b3c2fc4f63a398adfa446fb8eff791a4 ]

Only the E_NOT operand and not the E_NOT node itself was freed, due to
accidentally returning too early in expr_free(). Outline of leak:

	switch (e->type) {
	...
	case E_NOT:
		expr_free(e->left.expr);
		return;
	...
	}
	*Never reached, 'e' leaked*
	free(e);

Fix by changing the 'return' to a 'break'.

Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:

	LEAK SUMMARY:
	   definitely lost: 44,448 bytes in 1,852 blocks
	   ...

Summary after the fix:

	LEAK SUMMARY:
	   definitely lost: 1,608 bytes in 67 blocks
	   ...

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/kconfig/expr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -106,7 +106,7 @@ void expr_free(struct expr *e)
 		break;
 	case E_NOT:
 		expr_free(e->left.expr);
-		return;
+		break;
 	case E_EQUAL:
 	case E_UNEQUAL:
 		break;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 022/185] btrfs: Fix out of bounds access in btrfs_search_slot
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (17 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 021/185] kconfig: Fix expr_free() E_NOT leak Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 023/185] scsi: fas216: fix sense buffer initialization Greg Kroah-Hartman
                   ` (156 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nikolay Borisov, David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 9ea2c7c9da13c9073e371c046cbbc45481ecb459 ]

When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.

Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/ctree.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2758,6 +2758,8 @@ again:
 		 * contention with the cow code
 		 */
 		if (cow) {
+			bool last_level = (level == (BTRFS_MAX_LEVEL - 1));
+
 			/*
 			 * if we don't really need to cow this block
 			 * then we don't want to set the path blocking,
@@ -2782,9 +2784,13 @@ again:
 			}
 
 			btrfs_set_path_blocking(p);
-			err = btrfs_cow_block(trans, root, b,
-					      p->nodes[level + 1],
-					      p->slots[level + 1], &b);
+			if (last_level)
+				err = btrfs_cow_block(trans, root, b, NULL, 0,
+						      &b);
+			else
+				err = btrfs_cow_block(trans, root, b,
+						      p->nodes[level + 1],
+						      p->slots[level + 1], &b);
 			if (err) {
 				ret = err;
 				goto done;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 023/185] scsi: fas216: fix sense buffer initialization
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (18 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 022/185] btrfs: Fix out of bounds access in btrfs_search_slot Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 024/185] HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() Greg Kroah-Hartman
                   ` (155 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Martin K. Petersen,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 96d5eaa9bb74d299508d811d865c2c41b38b0301 ]

While testing with the ARM specific memset() macro removed, I ran into a
compiler warning that shows an old bug:

drivers/scsi/arm/fas216.c: In function 'fas216_rq_sns_done':
drivers/scsi/arm/fas216.c:2014:40: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]

It turns out that the definition of the scsi_cmd structure changed back
in linux-2.6.25, so now we clear only four bytes (sizeof(pointer))
instead of 96 (SCSI_SENSE_BUFFERSIZE). I did not check whether we
actually need to initialize the buffer here, but it's clear that if we
do it, we should use the correct size.

Fixes: de25deb18016 ("[SCSI] use dynamically allocated sense buffer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/arm/fas216.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2010,7 +2010,7 @@ static void fas216_rq_sns_done(FAS216_In
 		 * have valid data in the sense buffer that could
 		 * confuse the higher levels.
 		 */
-		memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
+		memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 //printk("scsi%d.%c: sense buffer: ", info->host->host_no, '0' + SCpnt->device->id);
 //{ int i; for (i = 0; i < 32; i++) printk("%02x ", SCpnt->sense_buffer[i]); printk("\n"); }
 	/*

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 024/185] HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (19 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 023/185] scsi: fas216: fix sense buffer initialization Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 025/185] jffs2: Fix use-after-free bug in jffs2_iget()s error handling path Greg Kroah-Hartman
                   ` (154 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Silvan Jegen,
	Jiri Kosina, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 7ad81482cad67cbe1ec808490d1ddfc420c42008 ]

We get the "new_profile_index" value from the mouse device when we're
handling raw events.  Smatch taints it as untrusted data and complains
that we need a bounds check.  This seems like a reasonable warning
otherwise there is a small read beyond the end of the array.

Fixes: 0e70f97f257e ("HID: roccat: Add support for Kova[+] mouse")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-roccat-kovaplus.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/hid/hid-roccat-kovaplus.c
+++ b/drivers/hid/hid-roccat-kovaplus.c
@@ -37,6 +37,8 @@ static uint kovaplus_convert_event_cpi(u
 static void kovaplus_profile_activated(struct kovaplus_device *kovaplus,
 		uint new_profile_index)
 {
+	if (new_profile_index >= ARRAY_SIZE(kovaplus->profile_settings))
+		return;
 	kovaplus->actual_profile = new_profile_index;
 	kovaplus->actual_cpi = kovaplus->profile_settings[new_profile_index].cpi_startup_level;
 	kovaplus->actual_x_sensitivity = kovaplus->profile_settings[new_profile_index].sensitivity_x;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 025/185] jffs2: Fix use-after-free bug in jffs2_iget()s error handling path
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (20 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 024/185] HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 026/185] RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure Greg Kroah-Hartman
                   ` (153 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Richard Weinberger,
	Jake Daryll Obina, Al Viro, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jake Daryll Obina <jake.obina@gmail.com>

[ Upstream commit 5bdd0c6f89fba430e18d636493398389dadc3b17 ]

If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode()
can get called twice in the error handling path, the first call in
jffs2_iget() itself and the second through iget_failed(). This can result
to a use-after-free error in the second jffs2_do_clear_inode() call, such
as shown by the oops below wherein the second jffs2_do_clear_inode() call
was trying to free node fragments that were already freed in the first
jffs2_do_clear_inode() call.

[   78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c
[   78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b
[   78.185871] pgd = ffffffc03a567000
[   78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000
[   78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
[   78.513147] PC is at rb_first_postorder+0xc/0x28
[   78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2]
[   78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105
[   78.526757] sp : ffffff800cea38f0
[   78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80
[   78.532754] x27: 0000000000000000 x26: ffffff800cea3c70
[   78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d
[   78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8
[   78.544760] x21: 0000000000000000 x20: 0000000000000000
[   78.548762] x19: ffffffc037d48910 x18: ffffff800891a588
[   78.552764] x17: 0000000000000800 x16: 0000000000000c00
[   78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f
[   78.560767] x13: 6461657220726f66 x12: 2064656c69616620
[   78.564769] x11: 435243203a6c616e x10: 7265746e695f6564
[   78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038
[   78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
[   78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000
[   78.580777] x3 : 0000000000000000 x2 : 000000403755e000
[   78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b
...
[   79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28
[   79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2]
[   79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2]
[   79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168
[   79.056835] [<ffffff8008202650>] iput+0x1c0/0x200
[   79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c
[   79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2]
[   79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2]
[   79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190
[   79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c
[   79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108
[   79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100
[   79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c
[   79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114
[   79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98
[   79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4
[   79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821)

The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since
iget_failed() will eventually call jffs2_do_clear_inode() if needed, so
just remove it.

Fixes: 5451f79f5f81 ("iget: stop JFFS2 from using iget() and read_inode()")
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/jffs2/fs.c |    1 -
 1 file changed, 1 deletion(-)

--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -363,7 +363,6 @@ error_io:
 	ret = -EIO;
 error:
 	mutex_unlock(&f->sem);
-	jffs2_do_clear_inode(c, f);
 	iget_failed(inode);
 	return ERR_PTR(ret);
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 026/185] RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (21 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 025/185] jffs2: Fix use-after-free bug in jffs2_iget()s error handling path Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 027/185] ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid Greg Kroah-Hartman
                   ` (152 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Majd Dibbiny, Leon Romanovsky,
	Yuval Shaia, Jason Gunthorpe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit b081808a66345ba725b77ecd8d759bee874cd937 ]

Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.

This patch changes behavior to always free memory and always return
success to the user.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/qp.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3032,12 +3032,9 @@ int mlx5_ib_dealloc_xrcd(struct ib_xrcd
 	int err;
 
 	err = mlx5_core_xrcd_dealloc(dev->mdev, xrcdn);
-	if (err) {
+	if (err)
 		mlx5_ib_warn(dev, "failed to dealloc xrcdn 0x%x\n", xrcdn);
-		return err;
-	}
 
 	kfree(xrcd);
-
 	return 0;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 027/185] ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (22 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 026/185] RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 028/185] ocfs2/acl: use ip_xattr_sem to protect getting extended attribute Greg Kroah-Hartman
                   ` (151 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jun Piao, Alex Chen, Joseph Qi,
	Changwei Ge, Gang He, Mark Fasheh, Joel Becker, Junxiao Bi,
	Andrew Morton, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: piaojun <piaojun@huawei.com>

[ Upstream commit 025bcbde3634b2c9b316f227fed13ad6ad6817fb ]

If metadata is corrupted such as 'invalid inode block', we will get
failed by calling 'mount()' and then set filesystem readonly as below:

  ocfs2_mount
    ocfs2_initialize_super
      ocfs2_init_global_system_inodes
        ocfs2_iget
          ocfs2_read_locked_inode
            ocfs2_validate_inode_block
	      ocfs2_error
	        ocfs2_handle_error
	          ocfs2_set_ro_flag(osb, 0);  // set readonly

In this situation we need return -EROFS to 'mount.ocfs2', so that user
can fix it by fsck.  And then mount again.  In addition, 'mount.ocfs2'
should be updated correspondingly as it only return 1 for all errno.
And I will post a patch for 'mount.ocfs2' too.

Link: http://lkml.kernel.org/r/5A4302FA.2010606@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/super.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -467,9 +467,8 @@ static int ocfs2_init_global_system_inod
 		new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
 		if (!new) {
 			ocfs2_release_system_inodes(osb);
-			status = -EINVAL;
+			status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
 			mlog_errno(status);
-			/* FIXME: Should ERROR_RO_FS */
 			mlog(ML_ERROR, "Unable to load system inode %d, "
 			     "possibly corrupt fs?", i);
 			goto bail;
@@ -498,7 +497,7 @@ static int ocfs2_init_local_system_inode
 		new = ocfs2_get_system_file_inode(osb, i, osb->slot_num);
 		if (!new) {
 			ocfs2_release_system_inodes(osb);
-			status = -EINVAL;
+			status = ocfs2_is_soft_readonly(osb) ? -EROFS : -EINVAL;
 			mlog(ML_ERROR, "status=%d, sysfile=%d, slot=%d\n",
 			     status, i, osb->slot_num);
 			goto bail;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 028/185] ocfs2/acl: use ip_xattr_sem to protect getting extended attribute
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (23 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 027/185] ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 029/185] mm/mempolicy: fix the check of nodemask from user Greg Kroah-Hartman
                   ` (150 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jun Piao, Alex Chen, Mark Fasheh,
	Joel Becker, Junxiao Bi, Joseph Qi, Changwei Ge, Andrew Morton,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: piaojun <piaojun@huawei.com>

[ Upstream commit 16c8d569f5704a84164f30ff01b29879f3438065 ]

The race between *set_acl and *get_acl will cause getting incomplete
xattr data as below:

  processA                                    processB

  ocfs2_set_acl
    ocfs2_xattr_set
      __ocfs2_xattr_set_handle

                                              ocfs2_get_acl_nolock
                                                ocfs2_xattr_get_nolock:

processB may get incomplete xattr data if processA hasn't set_acl done.

So we should use 'ip_xattr_sem' to protect getting extended attribute in
ocfs2_get_acl_nolock(), as other processes could be changing it
concurrently.

Link: http://lkml.kernel.org/r/5A5DDCFF.7030001@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/acl.c   |    6 ++++++
 fs/ocfs2/xattr.c |    2 ++
 2 files changed, 8 insertions(+)

--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -300,7 +300,9 @@ struct posix_acl *ocfs2_iop_get_acl(stru
 	if (ret < 0)
 		return ERR_PTR(ret);
 
+	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, type, di_bh);
+	up_read(&OCFS2_I(inode)->ip_xattr_sem);
 
 	brelse(di_bh);
 
@@ -319,7 +321,9 @@ int ocfs2_acl_chmod(struct inode *inode,
 	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
 		return 0;
 
+	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	acl = ocfs2_get_acl_nolock(inode, ACL_TYPE_ACCESS, bh);
+	up_read(&OCFS2_I(inode)->ip_xattr_sem);
 	if (IS_ERR(acl) || !acl)
 		return PTR_ERR(acl);
 	ret = __posix_acl_chmod(&acl, GFP_KERNEL, inode->i_mode);
@@ -350,8 +354,10 @@ int ocfs2_init_acl(handle_t *handle,
 
 	if (!S_ISLNK(inode->i_mode)) {
 		if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
+			down_read(&OCFS2_I(dir)->ip_xattr_sem);
 			acl = ocfs2_get_acl_nolock(dir, ACL_TYPE_DEFAULT,
 						   dir_bh);
+			up_read(&OCFS2_I(dir)->ip_xattr_sem);
 			if (IS_ERR(acl))
 				return PTR_ERR(acl);
 		}
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -645,9 +645,11 @@ int ocfs2_calc_xattr_init(struct inode *
 						     si->value_len);
 
 	if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
+		down_read(&OCFS2_I(dir)->ip_xattr_sem);
 		acl_len = ocfs2_xattr_get_nolock(dir, dir_bh,
 					OCFS2_XATTR_INDEX_POSIX_ACL_DEFAULT,
 					"", NULL, 0);
+		up_read(&OCFS2_I(dir)->ip_xattr_sem);
 		if (acl_len > 0) {
 			a_size = ocfs2_xattr_entry_real_size(0, acl_len);
 			if (S_ISDIR(mode))

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 029/185] mm/mempolicy: fix the check of nodemask from user
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (24 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 028/185] ocfs2/acl: use ip_xattr_sem to protect getting extended attribute Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 030/185] mm/mempolicy: add nodes_empty check in SYSC_migrate_pages Greg Kroah-Hartman
                   ` (149 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yisheng Xie, Tan Xiaojun,
	Vlastimil Babka, Andi Kleen, Chris Salls, Christopher Lameter,
	David Rientjes, Ingo Molnar, Naoya Horiguchi, Andrew Morton,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <xieyisheng1@huawei.com>

[ Upstream commit 56521e7a02b7b84a5e72691a1fb15570e6055545 ]

As Xiaojun reported the ltp of migrate_pages01 will fail on arm64 system
which has 4 nodes[0...3], all have memory and CONFIG_NODES_SHIFT=2:

  migrate_pages01    0  TINFO  :  test_invalid_nodes
  migrate_pages01   14  TFAIL  :  migrate_pages_common.c:45: unexpected failure - returned value = 0, expected: -1
  migrate_pages01   15  TFAIL  :  migrate_pages_common.c:55: call succeeded unexpectedly

In this case the test_invalid_nodes of migrate_pages01 will call:
SYSC_migrate_pages as:

  migrate_pages(0, , {0x0000000000000001}, 64, , {0x0000000000000010}, 64) = 0

The new nodes specifies one or more node IDs that are greater than the
maximum supported node ID, however, the errno is not set to EINVAL as
expected.

As man pages of set_mempolicy[1], mbind[2], and migrate_pages[3]
mentioned, when nodemask specifies one or more node IDs that are greater
than the maximum supported node ID, the errno should set to EINVAL.
However, get_nodes only check whether the part of bits
[BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES), maxnode) is zero or not, and
remain [MAX_NUMNODES, BITS_PER_LONG*BITS_TO_LONGS(MAX_NUMNODES)
unchecked.

This patch is to check the bits of [MAX_NUMNODES, maxnode) in get_nodes
to let migrate_pages set the errno to EINVAL when nodemask specifies one
or more node IDs that are greater than the maximum supported node ID,
which follows the manpage's guide.

[1] http://man7.org/linux/man-pages/man2/set_mempolicy.2.html
[2] http://man7.org/linux/man-pages/man2/mbind.2.html
[3] http://man7.org/linux/man-pages/man2/migrate_pages.2.html

Link: http://lkml.kernel.org/r/1510882624-44342-3-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/mempolicy.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1286,6 +1286,7 @@ static int get_nodes(nodemask_t *nodes,
 		     unsigned long maxnode)
 {
 	unsigned long k;
+	unsigned long t;
 	unsigned long nlongs;
 	unsigned long endmask;
 
@@ -1302,13 +1303,19 @@ static int get_nodes(nodemask_t *nodes,
 	else
 		endmask = (1UL << (maxnode % BITS_PER_LONG)) - 1;
 
-	/* When the user specified more nodes than supported just check
-	   if the non supported part is all zero. */
+	/*
+	 * When the user specified more nodes than supported just check
+	 * if the non supported part is all zero.
+	 *
+	 * If maxnode have more longs than MAX_NUMNODES, check
+	 * the bits in that area first. And then go through to
+	 * check the rest bits which equal or bigger than MAX_NUMNODES.
+	 * Otherwise, just check bits [MAX_NUMNODES, maxnode).
+	 */
 	if (nlongs > BITS_TO_LONGS(MAX_NUMNODES)) {
 		if (nlongs > PAGE_SIZE/sizeof(long))
 			return -EINVAL;
 		for (k = BITS_TO_LONGS(MAX_NUMNODES); k < nlongs; k++) {
-			unsigned long t;
 			if (get_user(t, nmask + k))
 				return -EFAULT;
 			if (k == nlongs - 1) {
@@ -1321,6 +1328,16 @@ static int get_nodes(nodemask_t *nodes,
 		endmask = ~0UL;
 	}
 
+	if (maxnode > MAX_NUMNODES && MAX_NUMNODES % BITS_PER_LONG != 0) {
+		unsigned long valid_mask = endmask;
+
+		valid_mask &= ~((1UL << (MAX_NUMNODES % BITS_PER_LONG)) - 1);
+		if (get_user(t, nmask + nlongs - 1))
+			return -EFAULT;
+		if (t & valid_mask)
+			return -EINVAL;
+	}
+
 	if (copy_from_user(nodes_addr(*nodes), nmask, nlongs*sizeof(unsigned long)))
 		return -EFAULT;
 	nodes_addr(*nodes)[nlongs-1] &= endmask;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 030/185] mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (25 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 029/185] mm/mempolicy: fix the check of nodemask from user Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 031/185] asm-generic: provide generic_pmdp_establish() Greg Kroah-Hartman
                   ` (148 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yisheng Xie, Vlastimil Babka,
	Andi Kleen, Chris Salls, Christopher Lameter, David Rientjes,
	Ingo Molnar, Naoya Horiguchi, Tan Xiaojun, Andrew Morton,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <xieyisheng1@huawei.com>

[ Upstream commit 0486a38bcc4749808edbc848f1bcf232042770fc ]

As in manpage of migrate_pages, the errno should be set to EINVAL when
none of the node IDs specified by new_nodes are on-line and allowed by
the process's current cpuset context, or none of the specified nodes
contain memory.  However, when test by following case:

	new_nodes = 0;
	old_nodes = 0xf;
	ret = migrate_pages(pid, old_nodes, new_nodes, MAX);

The ret will be 0 and no errno is set.  As the new_nodes is empty, we
should expect EINVAL as documented.

To fix the case like above, this patch check whether target nodes AND
current task_nodes is empty, and then check whether AND
node_states[N_MEMORY] is empty.

Link: http://lkml.kernel.org/r/1510882624-44342-4-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chris Salls <salls@cs.ucsb.edu>
Cc: Christopher Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/mempolicy.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1464,10 +1464,14 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pi
 		goto out_put;
 	}
 
-	if (!nodes_subset(*new, node_states[N_MEMORY])) {
-		err = -EINVAL;
+	task_nodes = cpuset_mems_allowed(current);
+	nodes_and(*new, *new, task_nodes);
+	if (nodes_empty(*new))
+		goto out_put;
+
+	nodes_and(*new, *new, node_states[N_MEMORY]);
+	if (nodes_empty(*new))
 		goto out_put;
-	}
 
 	err = security_task_movememory(task);
 	if (err)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 031/185] asm-generic: provide generic_pmdp_establish()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (26 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 030/185] mm/mempolicy: add nodes_empty check in SYSC_migrate_pages Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 032/185] mm: pin address_space before dereferencing it while isolating an LRU page Greg Kroah-Hartman
                   ` (147 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kirill A. Shutemov, Vlastimil Babka,
	Andrea Arcangeli, Michal Hocko, Aneesh Kumar K.V,
	Catalin Marinas, David Daney, David Miller, H. Peter Anvin,
	Hugh Dickins, Ingo Molnar, Martin Schwidefsky, Nitin Gupta,
	Ralf Baechle, Thomas Gleixner, Vineet Gupta, Andrew Morton,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

[ Upstream commit c58f0bb77ed8bf93dfdde762b01cb67eebbdfc29 ]

Patch series "Do not lose dirty bit on THP pages", v4.

Vlastimil noted that pmdp_invalidate() is not atomic and we can lose
dirty and access bits if CPU sets them after pmdp dereference, but
before set_pmd_at().

The bug can lead to data loss, but the race window is tiny and I haven't
seen any reports that suggested that it happens in reality.  So I don't
think it worth sending it to stable.

Unfortunately, there's no way to address the issue in a generic way.  We
need to fix all architectures that support THP one-by-one.

All architectures that have THP supported have to provide atomic
pmdp_invalidate() that returns previous value.

If generic implementation of pmdp_invalidate() is used, architecture
needs to provide atomic pmdp_estabish().

pmdp_estabish() is not used out-side generic implementation of
pmdp_invalidate() so far, but I think this can change in the future.

This patch (of 12):

This is an implementation of pmdp_establish() that is only suitable for
an architecture that doesn't have hardware dirty/accessed bits.  In this
case we can't race with CPU which sets these bits and non-atomic
approach is fine.

Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Daney <david.daney@cavium.com>
Cc: David Miller <davem@davemloft.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nitin Gupta <nitin.m.gupta@oracle.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/asm-generic/pgtable.h |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -181,6 +181,21 @@ extern void pgtable_trans_huge_deposit(s
 extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
 #endif
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/*
+ * This is an implementation of pmdp_establish() that is only suitable for an
+ * architecture that doesn't have hardware dirty/accessed bits. In this case we
+ * can't race with CPU which sets these bits and non-atomic aproach is fine.
+ */
+static inline pmd_t generic_pmdp_establish(struct vm_area_struct *vma,
+		unsigned long address, pmd_t *pmdp, pmd_t pmd)
+{
+	pmd_t old_pmd = *pmdp;
+	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
+	return old_pmd;
+}
+#endif
+
 #ifndef __HAVE_ARCH_PMDP_INVALIDATE
 extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 			    pmd_t *pmdp);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 032/185] mm: pin address_space before dereferencing it while isolating an LRU page
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (27 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 031/185] asm-generic: provide generic_pmdp_establish() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 033/185] IB/ipoib: Fix for potential no-carrier state Greg Kroah-Hartman
                   ` (146 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mel Gorman, Minchan Kim, Huang, Ying,
	Jan Kara, Andrew Morton, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mel Gorman <mgorman@techsingularity.net>

[ Upstream commit 69d763fc6d3aee787a3e8c8c35092b4f4960fa5d ]

Minchan Kim asked the following question -- what locks protects
address_space destroying when race happens between inode trauncation and
__isolate_lru_page? Jan Kara clarified by describing the race as follows

CPU1                                            CPU2

truncate(inode)                                 __isolate_lru_page()
  ...
  truncate_inode_page(mapping, page);
    delete_from_page_cache(page)
      spin_lock_irqsave(&mapping->tree_lock, flags);
        __delete_from_page_cache(page, NULL)
          page_cache_tree_delete(..)
            ...                                   mapping = page_mapping(page);
            page->mapping = NULL;
            ...
      spin_unlock_irqrestore(&mapping->tree_lock, flags);
      page_cache_free_page(mapping, page)
        put_page(page)
          if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space

                                                  if (mapping && !mapping->a_ops->migratepage)
- we've dereferenced mapping which is potentially already free.

The race is theoretically possible but unlikely.  Before the
delete_from_page_cache, truncate_cleanup_page is called so the page is
likely to be !PageDirty or PageWriteback which gets skipped by the only
caller that checks the mappping in __isolate_lru_page.  Even if the race
occurs, a substantial amount of work has to happen during a tiny window
with no preemption but it could potentially be done using a virtual
machine to artifically slow one CPU or halt it during the critical
window.

This patch should eliminate the race with truncation by try-locking the
page before derefencing mapping and aborting if the lock was not
acquired.  There was a suggestion from Huang Ying to use RCU as a
side-effect to prevent mapping being freed.  However, I do not like the
solution as it's an unconventional means of preserving a mapping and
it's not a context where rcu_read_lock is obviously protecting rcu data.

Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net
Fixes: c82449352854 ("mm: compaction: make isolate_lru_page() filter-aware again")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmscan.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1215,6 +1215,7 @@ int __isolate_lru_page(struct page *page
 
 		if (PageDirty(page)) {
 			struct address_space *mapping;
+			bool migrate_dirty;
 
 			/* ISOLATE_CLEAN means only clean pages */
 			if (mode & ISOLATE_CLEAN)
@@ -1223,10 +1224,19 @@ int __isolate_lru_page(struct page *page
 			/*
 			 * Only pages without mappings or that have a
 			 * ->migratepage callback are possible to migrate
-			 * without blocking
+			 * without blocking. However, we can be racing with
+			 * truncation so it's necessary to lock the page
+			 * to stabilise the mapping as truncation holds
+			 * the page lock until after the page is removed
+			 * from the page cache.
 			 */
+			if (!trylock_page(page))
+				return ret;
+
 			mapping = page_mapping(page);
-			if (mapping && !mapping->a_ops->migratepage)
+			migrate_dirty = mapping && mapping->a_ops->migratepage;
+			unlock_page(page);
+			if (!migrate_dirty)
 				return ret;
 		}
 	}

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 033/185] IB/ipoib: Fix for potential no-carrier state
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (28 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 032/185] mm: pin address_space before dereferencing it while isolating an LRU page Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 034/185] x86/power: Fix swsusp_arch_resume prototype Greg Kroah-Hartman
                   ` (145 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mike Marciniszyn, Ira Weiny,
	Alex Estrin, Dennis Dalessandro, Jason Gunthorpe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Estrin <alex.estrin@intel.com>

[ Upstream commit 1029361084d18cc270f64dfd39529fafa10cfe01 ]

On reboot SM can program port pkey table before ipoib registered its
event handler, which could result in missing pkey event and leave root
interface with initial pkey value from index 0.

Since OPA port starts with invalid pkey in index 0, root interface will
fail to initialize and stay down with no-carrier flag.

For IB ipoib interface may end up with pkey different from value
opensm put in pkey table idx 0, resulting in connectivity issues
(different mcast groups, for example).

Close the window by calling event handler after registration
to make sure ipoib pkey is in sync with port pkey table.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1644,6 +1644,9 @@ static struct net_device *ipoib_add_port
 		goto event_failed;
 	}
 
+	/* call event handler to ensure pkey in sync */
+	queue_work(ipoib_workqueue, &priv->flush_heavy);
+
 	result = register_netdev(priv->dev);
 	if (result) {
 		printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n",

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 034/185] x86/power: Fix swsusp_arch_resume prototype
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (29 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 033/185] IB/ipoib: Fix for potential no-carrier state Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 035/185] firmware: dmi_scan: Fix handling of empty DMI strings Greg Kroah-Hartman
                   ` (144 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Thomas Gleixner,
	Len Brown, Andi Kleen, Nicolas Pitre, linux-pm,
	Rafael J. Wysocki, Pavel Machek, Bart Van Assche, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 328008a72d38b5bde6491e463405c34a81a65d3e ]

The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the
definition in x86-32 does not, and it fails to include the header with the
declaration. This leads to a warning when building with
link-time-optimizations:

kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch]
 extern asmlinkage int swsusp_arch_resume(void);
                       ^
arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here
 int swsusp_arch_resume(void)

This moves the declaration into a globally visible header file and fixes up
both x86 definitions to match it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/power/hibernate_32.c |    2 +-
 arch/x86/power/hibernate_64.c |    2 +-
 include/linux/suspend.h       |    2 ++
 kernel/power/power.h          |    3 ---
 4 files changed, 4 insertions(+), 5 deletions(-)

--- a/arch/x86/power/hibernate_32.c
+++ b/arch/x86/power/hibernate_32.c
@@ -142,7 +142,7 @@ static inline void resume_init_first_lev
 #endif
 }
 
-int swsusp_arch_resume(void)
+asmlinkage int swsusp_arch_resume(void)
 {
 	int error;
 
--- a/arch/x86/power/hibernate_64.c
+++ b/arch/x86/power/hibernate_64.c
@@ -78,7 +78,7 @@ static int set_up_temporary_mappings(voi
 	return 0;
 }
 
-int swsusp_arch_resume(void)
+asmlinkage int swsusp_arch_resume(void)
 {
 	int error;
 
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -325,6 +325,8 @@ extern int swsusp_page_is_forbidden(stru
 extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
 extern unsigned long get_safe_page(gfp_t gfp_mask);
+extern asmlinkage int swsusp_arch_suspend(void);
+extern asmlinkage int swsusp_arch_resume(void);
 
 extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -85,9 +85,6 @@ extern int in_suspend;
 extern dev_t swsusp_resume_device;
 extern sector_t swsusp_resume_block;
 
-extern asmlinkage int swsusp_arch_suspend(void);
-extern asmlinkage int swsusp_arch_resume(void);
-
 extern int create_basic_memory_bitmaps(void);
 extern void free_basic_memory_bitmaps(void);
 extern int hibernate_preallocate_memory(void);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 035/185] firmware: dmi_scan: Fix handling of empty DMI strings
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (30 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 034/185] x86/power: Fix swsusp_arch_resume prototype Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 036/185] ACPI: processor_perflib: Do not send _PPC change notification if not ready Greg Kroah-Hartman
                   ` (143 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jean Delvare, Parag Warudkar,
	Ingo Molnar, Thomas Gleixner, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit a7770ae194569e96a93c48aceb304edded9cc648 ]

The handling of empty DMI strings looks quite broken to me:
* Strings from 1 to 7 spaces are not considered empty.
* True empty DMI strings (string index set to 0) are not considered
  empty, and result in allocating a 0-char string.
* Strings with invalid index also result in allocating a 0-char
  string.
* Strings starting with 8 spaces are all considered empty, even if
  non-space characters follow (sounds like a weird thing to do, but
  I have actually seen occurrences of this in DMI tables before.)
* Strings which are considered empty are reported as 8 spaces,
  instead of being actually empty.

Some of these issues are the result of an off-by-one error in memcmp,
the rest is incorrect by design.

So let's get it square: missing strings and strings made of only
spaces, regardless of their length, should be treated as empty and
no memory should be allocated for them. All other strings are
non-empty and should be allocated.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 79da4721117f ("x86: fix DMI out of memory problems")
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/firmware/dmi_scan.c |   22 +++++++++-------------
 1 file changed, 9 insertions(+), 13 deletions(-)

--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -15,7 +15,7 @@
  * of and an antecedent to, SMBIOS, which stands for System
  * Management BIOS.  See further: http://www.dmtf.org/standards
  */
-static const char dmi_empty_string[] = "        ";
+static const char dmi_empty_string[] = "";
 
 static u16 __initdata dmi_ver;
 /*
@@ -36,25 +36,21 @@ static int dmi_memdev_nr;
 static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s)
 {
 	const u8 *bp = ((u8 *) dm) + dm->length;
+	const u8 *nsp;
 
 	if (s) {
-		s--;
-		while (s > 0 && *bp) {
+		while (--s > 0 && *bp)
 			bp += strlen(bp) + 1;
-			s--;
-		}
 
-		if (*bp != 0) {
-			size_t len = strlen(bp)+1;
-			size_t cmp_len = len > 8 ? 8 : len;
-
-			if (!memcmp(bp, dmi_empty_string, cmp_len))
-				return dmi_empty_string;
+		/* Strings containing only spaces are considered empty */
+		nsp = bp;
+		while (*nsp == ' ')
+			nsp++;
+		if (*nsp != '\0')
 			return bp;
-		}
 	}
 
-	return "";
+	return dmi_empty_string;
 }
 
 static const char * __init dmi_string(const struct dmi_header *dm, u8 s)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 036/185] ACPI: processor_perflib: Do not send _PPC change notification if not ready
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (31 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 035/185] firmware: dmi_scan: Fix handling of empty DMI strings Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 037/185] MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS Greg Kroah-Hartman
                   ` (142 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Doug Smythies, Srinivas Pandruvada,
	Yu Chen, Rafael J. Wysocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Yu <yu.c.chen@intel.com>

[ Upstream commit ba1edb9a5125a617d612f98eead14b9b84e75c3a ]

The following warning was triggered after resumed from S3 -
if all the nonboot CPUs were put offline before suspend:

[ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30)
[ 1840.329516] Call Trace:
[ 1840.329521]  __rdmsr_on_cpu+0x33/0x50
[ 1840.329525]  generic_exec_single+0x81/0xb0
[ 1840.329527]  smp_call_function_single+0xd2/0x100
[ 1840.329530]  ? acpi_ds_result_pop+0xdd/0xf2
[ 1840.329532]  ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329534]  rdmsrl_on_cpu+0x57/0x80
[ 1840.329536]  ? cpumask_next+0x1b/0x20
[ 1840.329538]  ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329541]  intel_pstate_update_perf_limits+0xf3/0x220
[ 1840.329544]  ? notifier_call_chain+0x4a/0x70
[ 1840.329546]  intel_pstate_set_policy+0x4e/0x150
[ 1840.329548]  cpufreq_set_policy+0xcd/0x2f0
[ 1840.329550]  cpufreq_update_policy+0xb2/0x130
[ 1840.329552]  ? cpufreq_update_policy+0x130/0x130
[ 1840.329556]  acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329558]  acpi_processor_notify+0x80/0x100
[ 1840.329561]  acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329563]  acpi_os_execute_deferred+0x14/0x20
[ 1840.329565]  process_one_work+0x193/0x3c0
[ 1840.329567]  worker_thread+0x35/0x3b0
[ 1840.329569]  kthread+0x125/0x140
[ 1840.329571]  ? process_one_work+0x3c0/0x3c0
[ 1840.329572]  ? kthread_park+0x60/0x60
[ 1840.329575]  ? do_syscall_64+0x67/0x180
[ 1840.329577]  ret_from_fork+0x25/0x30
[ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30)
[ 1840.329586] Call Trace:
[ 1840.329587]  __wrmsr_on_cpu+0x37/0x40
[ 1840.329589]  generic_exec_single+0x81/0xb0
[ 1840.329592]  smp_call_function_single+0xd2/0x100
[ 1840.329594]  ? acpi_ds_create_operand+0x215/0x23c
[ 1840.329595]  ? cpumask_next+0x1b/0x20
[ 1840.329597]  wrmsrl_on_cpu+0x57/0x70
[ 1840.329598]  ? rdmsrl_on_cpu+0x57/0x80
[ 1840.329599]  ? wrmsrl_on_cpu+0x57/0x70
[ 1840.329602]  intel_pstate_hwp_set+0xd3/0x150
[ 1840.329604]  intel_pstate_set_policy+0x119/0x150
[ 1840.329606]  cpufreq_set_policy+0xcd/0x2f0
[ 1840.329607]  cpufreq_update_policy+0xb2/0x130
[ 1840.329610]  ? cpufreq_update_policy+0x130/0x130
[ 1840.329613]  acpi_processor_ppc_has_changed+0x65/0x80
[ 1840.329615]  acpi_processor_notify+0x80/0x100
[ 1840.329617]  acpi_ev_notify_dispatch+0x44/0x5c
[ 1840.329619]  acpi_os_execute_deferred+0x14/0x20
[ 1840.329620]  process_one_work+0x193/0x3c0
[ 1840.329622]  worker_thread+0x35/0x3b0
[ 1840.329624]  kthread+0x125/0x140
[ 1840.329625]  ? process_one_work+0x3c0/0x3c0
[ 1840.329626]  ? kthread_park+0x60/0x60
[ 1840.329628]  ? do_syscall_64+0x67/0x180
[ 1840.329631]  ret_from_fork+0x25/0x30

This is because if there's only one online CPU, the MSR_PM_ENABLE
(package wide)can not be enabled after resumed, due to
intel_pstate_hwp_enable() will only be invoked on AP's online
process after resumed - if there's no AP online, the HWP remains
disabled after resumed (BIOS has disabled it in S3). Then if
there comes a _PPC change notification which touches HWP register
during this stage, the warning is triggered.

Since we don't call acpi_processor_register_performance() when
HWP is enabled, the pr->performance will be NULL. When this is
NULL we don't need to do _PPC change notification.

Reported-by: Doug Smythies <dsmythies@telus.net>
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Yu Chen <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/processor_perflib.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -165,7 +165,7 @@ int acpi_processor_ppc_has_changed(struc
 {
 	int ret;
 
-	if (ignore_ppc) {
+	if (ignore_ppc || !pr->performance) {
 		/*
 		 * Only when it is notification event, the _OST object
 		 * will be evaluated. Otherwise it is skipped.

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 037/185] MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (32 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 036/185] ACPI: processor_perflib: Do not send _PPC change notification if not ready Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 038/185] xen/grant-table: Use put_page instead of free_page Greg Kroah-Hartman
                   ` (141 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matt Redfearn, James Hogan,
	Ralf Baechle, linux-mips, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Redfearn <matt.redfearn@mips.com>

[ Upstream commit 0cde5b44a30f1daaef1c34e08191239dc63271c4 ]

When commit b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
added board support for the RBTX4939, it added a call to
led_classdev_register even if the LED class is built as a module.
Built-in arch code cannot call module code directly like this. Commit
b33b44073734 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently
changed the inclusion of this code to a single check that
CONFIG_LEDS_CLASS is either builtin or a module, but the same issue
remains.

This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y
is set:

arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe':
setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register'
make: *** [Makefile:999: vmlinux] Error 1

Fix this by using the IS_BUILTIN() macro instead.

Fixes: b27311e1cace ("MIPS: TXx9: Add RBTX4939 board support")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18544/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/txx9/rbtx4939/setup.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -186,7 +186,7 @@ static void __init rbtx4939_update_ioc_p
 
 #define RBTX4939_MAX_7SEGLEDS	8
 
-#if IS_ENABLED(CONFIG_LEDS_CLASS)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS)
 static u8 led_val[RBTX4939_MAX_7SEGLEDS];
 struct rbtx4939_led_data {
 	struct led_classdev cdev;
@@ -262,7 +262,7 @@ static inline void rbtx4939_led_setup(vo
 
 static void __rbtx4939_7segled_putc(unsigned int pos, unsigned char val)
 {
-#if IS_ENABLED(CONFIG_LEDS_CLASS)
+#if IS_BUILTIN(CONFIG_LEDS_CLASS)
 	unsigned long flags;
 	local_irq_save(flags);
 	/* bit7: reserved for LED class */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 038/185] xen/grant-table: Use put_page instead of free_page
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (33 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 037/185] MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 039/185] proc: fix /proc/*/map_files lookup Greg Kroah-Hartman
                   ` (140 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ross Lagerwall, Boris Ostrovsky,
	Juergen Gross, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall <ross.lagerwall@citrix.com>

[ Upstream commit 3ac7292a25db1c607a50752055a18aba32ac2176 ]

The page given to gnttab_end_foreign_access() to free could be a
compound page so use put_page() instead of free_page() since it can
handle both compound and single pages correctly.

This bug was discovered when migrating a Xen VM with several VIFs and
CONFIG_DEBUG_VM enabled. It hits a BUG usually after fewer than 10
iterations. All netfront devices disconnect from the backend during a
suspend/resume and this will call gnttab_end_foreign_access() if a
netfront queue has an outstanding skb. The mismatch between calling
get_page() and free_page() on a compound page causes a reference
counting error which is detected when DEBUG_VM is enabled.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/grant-table.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -322,7 +322,7 @@ static void gnttab_handle_deferred(unsig
 			if (entry->page) {
 				pr_debug("freeing g.e. %#x (pfn %#lx)\n",
 					 entry->ref, page_to_pfn(entry->page));
-				__free_page(entry->page);
+				put_page(entry->page);
 			} else
 				pr_info("freeing g.e. %#x\n", entry->ref);
 			kfree(entry);
@@ -378,7 +378,7 @@ void gnttab_end_foreign_access(grant_ref
 	if (gnttab_end_foreign_access_ref(ref, readonly)) {
 		put_free_entry(ref);
 		if (page != 0)
-			free_page(page);
+			put_page(virt_to_page(page));
 	} else
 		gnttab_add_deferred(ref, readonly,
 				    page ? virt_to_page(page) : NULL);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 039/185] proc: fix /proc/*/map_files lookup
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (34 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 038/185] xen/grant-table: Use put_page instead of free_page Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 040/185] cifs: silence compiler warnings showing up with gcc-8.0.0 Greg Kroah-Hartman
                   ` (139 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexey Dobriyan, Pavel Emelyanov,
	Andrei Vagin, Andrew Morton, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit ac7f1061c2c11bb8936b1b6a94cdb48de732f7a4 ]

Current code does:

	if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2)

However sscanf() is broken garbage.

It silently accepts whitespace between format specifiers
(did you know that?).

It silently accepts valid strings which result in integer overflow.

Do not use sscanf() for any even remotely reliable parsing code.

	OK
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/               55a23af39000-55a23b05b000'
	/lib/systemd/systemd

	broken
	# readlink '/proc/1/map_files/55a23af39000-55a23b05b000    '
	/lib/systemd/systemd

	very broken
	# readlink '/proc/1/map_files/1000000000000000055a23af39000-55a23b05b000'
	/lib/systemd/systemd

Andrei said:

: This patch breaks criu.  It was a bug in criu.  And this bug is on a minor
: path, which works when memfd_create() isn't available.  It is a reason why
: I ask to not backport this patch to stable kernels.
:
: In CRIU this bug can be triggered, only if this patch will be backported
: to a kernel which version is lower than v3.16.

Link: http://lkml.kernel.org/r/20171120212706.GA14325@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/base.c |   29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -94,6 +94,8 @@
 #include "internal.h"
 #include "fd.h"
 
+#include "../../lib/kstrtox.h"
+
 /* NOTE:
  *	Implementing inode permission operations in /proc is almost
  *	certainly an error.  Permission checks need to happen during
@@ -1642,8 +1644,33 @@ end_instantiate:
 static int dname_to_vma_addr(struct dentry *dentry,
 			     unsigned long *start, unsigned long *end)
 {
-	if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2)
+	const char *str = dentry->d_name.name;
+	unsigned long long sval, eval;
+	unsigned int len;
+
+	len = _parse_integer(str, 16, &sval);
+	if (len & KSTRTOX_OVERFLOW)
+		return -EINVAL;
+	if (sval != (unsigned long)sval)
 		return -EINVAL;
+	str += len;
+
+	if (*str != '-')
+		return -EINVAL;
+	str++;
+
+	len = _parse_integer(str, 16, &eval);
+	if (len & KSTRTOX_OVERFLOW)
+		return -EINVAL;
+	if (eval != (unsigned long)eval)
+		return -EINVAL;
+	str += len;
+
+	if (*str != '\0')
+		return -EINVAL;
+
+	*start = sval;
+	*end = eval;
 
 	return 0;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 040/185] cifs: silence compiler warnings showing up with gcc-8.0.0
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (35 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 039/185] proc: fix /proc/*/map_files lookup Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 041/185] bcache: properly set task state in bch_writeback_thread() Greg Kroah-Hartman
                   ` (138 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Steve French, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit ade7db991b47ab3016a414468164f4966bd08202 ]

This bug was fixed before, but came up again with the latest
compiler in another function:

fs/cifs/cifssmb.c: In function 'CIFSSMBSetEA':
fs/cifs/cifssmb.c:6362:3: error: 'strncpy' offset 8 is out of the bounds [0, 4] [-Werror=array-bounds]
   strncpy(parm_data->list[0].name, ea_name, name_len);

Let's apply the same fix that was used for the other instances.

Fixes: b2a3ad9ca502 ("cifs: silence compiler warnings showing up with gcc-4.7.0")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/cifssmb.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -6413,9 +6413,7 @@ SetEARetry:
 	pSMB->InformationLevel =
 		cpu_to_le16(SMB_SET_FILE_EA);
 
-	parm_data =
-		(struct fealist *) (((char *) &pSMB->hdr.Protocol) +
-				       offset);
+	parm_data = (void *)pSMB + offsetof(struct smb_hdr, Protocol) + offset;
 	pSMB->ParameterOffset = cpu_to_le16(param_offset);
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->SetupCount = 1;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 041/185] bcache: properly set task state in bch_writeback_thread()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (36 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 040/185] cifs: silence compiler warnings showing up with gcc-8.0.0 Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 043/185] bcache: fix for data collapse after re-attaching an attached device Greg Kroah-Hartman
                   ` (137 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Coly Li, Hannes Reinecke,
	Michael Lyle, Junhui Tang, Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Coly Li <colyli@suse.de>

[ Upstream commit 99361bbf26337186f02561109c17a4c4b1a7536a ]

Kernel thread routine bch_writeback_thread() has the following code block,

447         down_write(&dc->writeback_lock);
448~450     if (check conditions) {
451                 up_write(&dc->writeback_lock);
452                 set_current_state(TASK_INTERRUPTIBLE);
453
454                 if (kthread_should_stop())
455                         return 0;
456
457                 schedule();
458                 continue;
459         }

If condition check is true, its task state is set to TASK_INTERRUPTIBLE
and call schedule() to wait for others to wake up it.

There are 2 issues in current code,
1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if
   another process changes the condition and call wake_up_process(dc->
   writeback_thread), then at line 452 task state is set back to
   TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be
   waken up.
2, At line 454 if kthread_should_stop() is true, writeback kernel thread
   will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and
   call do_exit(). It is not good to enter do_exit() with task state
   TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a
   warning message is reported by __might_sleep(): "WARNING: do not call
   blocking ops when !TASK_RUNNING; state=1 set at [xxxx]".

For the first issue, task state should be set before condition checks.
Ineed because dc->writeback_lock is required when modifying all the
conditions, calling set_current_state() inside code block where dc->
writeback_lock is hold is safe. But this is quite implicit, so I still move
set_current_state() before all the condition checks.

For the second issue, frankley speaking it does not hurt when kernel thread
exits with TASK_INTERRUPTIBLE state, but this warning message scares users,
makes them feel there might be something risky with bcache and hurt their
data.  Setting task state to TASK_RUNNING before returning fixes this
problem.

In alloc.c:allocator_wait(), there is also a similar issue, and is also
fixed in this patch.

Changelog:
v3: merge two similar fixes into one patch
v2: fix the race issue in v1 patch.
v1: initial buggy fix.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/bcache/alloc.c     |    4 +++-
 drivers/md/bcache/writeback.c |    7 +++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -285,8 +285,10 @@ do {									\
 			break;						\
 									\
 		mutex_unlock(&(ca)->set->bucket_lock);			\
-		if (kthread_should_stop())				\
+		if (kthread_should_stop()) {				\
+			set_current_state(TASK_RUNNING);		\
 			return 0;					\
+		}							\
 									\
 		try_to_freeze();					\
 		schedule();						\
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -425,19 +425,22 @@ static int bch_writeback_thread(void *ar
 
 	while (!kthread_should_stop()) {
 		down_write(&dc->writeback_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
 		if (!atomic_read(&dc->has_dirty) ||
 		    (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
 		     !dc->writeback_running)) {
 			up_write(&dc->writeback_lock);
-			set_current_state(TASK_INTERRUPTIBLE);
 
-			if (kthread_should_stop())
+			if (kthread_should_stop()) {
+				set_current_state(TASK_RUNNING);
 				return 0;
+			}
 
 			try_to_freeze();
 			schedule();
 			continue;
 		}
+		set_current_state(TASK_RUNNING);
 
 		searched_full_index = refill_dirty(dc);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 043/185] bcache: fix for data collapse after re-attaching an attached device
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (37 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 041/185] bcache: properly set task state in bch_writeback_thread() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 044/185] bcache: return attach error when no cache set exist Greg Kroah-Hartman
                   ` (136 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tang Junhui, Michael Lyle,
	Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 73ac105be390c1de42a2f21643c9778a5e002930 ]

back-end device sdm has already attached a cache_set with ID
f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with
another cache set, and it returns with an error:
[root]# cd /sys/block/sdm/bcache
[root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach
-bash: echo: write error: Invalid argument

After that, execute a command to modify the label of bcache
device:
[root]# echo data_disk1 > label

Then we reboot the system, when the system power on, the back-end
device can not attach to cache_set, a messages show in the log:
Feb  5 12:05:52 ceph152 kernel: [922385.508498] bcache:
bch_cached_dev_attach() couldn't find uuid for sdm in set

In sysfs_attach(), dc->sb.set_uuid was assigned to the value
which input through sysfs, no matter whether it is success
or not in bch_cached_dev_attach(). For example, If the back-end
device has already attached to an cache set, bch_cached_dev_attach()
would fail, but dc->sb.set_uuid was changed. Then modify the
label of bcache device, it will call bch_write_bdev_super(),
which would write the dc->sb.set_uuid to the super block, so we
record a wrong cache set ID in the super block, after the system
reboot, the cache set couldn't find the uuid of the back-end
device, so the bcache device couldn't exist and use any more.

In this patch, we don't assigned cache set ID to dc->sb.set_uuid
in sysfs_attach() directly, but input it into bch_cached_dev_attach(),
and assigned dc->sb.set_uuid to the cache set ID after the back-end
device attached to the cache set successful.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/bcache/bcache.h |    2 +-
 drivers/md/bcache/super.c  |   10 ++++++----
 drivers/md/bcache/sysfs.c  |    6 ++++--
 3 files changed, 11 insertions(+), 7 deletions(-)

--- a/drivers/md/bcache/bcache.h
+++ b/drivers/md/bcache/bcache.h
@@ -922,7 +922,7 @@ void bcache_write_super(struct cache_set
 
 int bch_flash_dev_create(struct cache_set *c, uint64_t size);
 
-int bch_cached_dev_attach(struct cached_dev *, struct cache_set *);
+int bch_cached_dev_attach(struct cached_dev *, struct cache_set *, uint8_t *);
 void bch_cached_dev_detach(struct cached_dev *);
 void bch_cached_dev_run(struct cached_dev *);
 void bcache_device_stop(struct bcache_device *);
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -967,7 +967,8 @@ void bch_cached_dev_detach(struct cached
 	cached_dev_put(dc);
 }
 
-int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c)
+int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
+			  uint8_t *set_uuid)
 {
 	uint32_t rtime = cpu_to_le32(get_seconds());
 	struct uuid_entry *u;
@@ -975,7 +976,8 @@ int bch_cached_dev_attach(struct cached_
 
 	bdevname(dc->bdev, buf);
 
-	if (memcmp(dc->sb.set_uuid, c->sb.set_uuid, 16))
+	if ((set_uuid && memcmp(set_uuid, c->sb.set_uuid, 16)) ||
+	    (!set_uuid && memcmp(dc->sb.set_uuid, c->sb.set_uuid, 16)))
 		return -ENOENT;
 
 	if (dc->disk.c) {
@@ -1209,7 +1211,7 @@ static void register_bdev(struct cache_s
 
 	list_add(&dc->list, &uncached_devices);
 	list_for_each_entry(c, &bch_cache_sets, list)
-		bch_cached_dev_attach(dc, c);
+		bch_cached_dev_attach(dc, c, NULL);
 
 	if (BDEV_STATE(&dc->sb) == BDEV_STATE_NONE ||
 	    BDEV_STATE(&dc->sb) == BDEV_STATE_STALE)
@@ -1729,7 +1731,7 @@ static void run_cache_set(struct cache_s
 	bcache_write_super(c);
 
 	list_for_each_entry_safe(dc, t, &uncached_devices, list)
-		bch_cached_dev_attach(dc, c);
+		bch_cached_dev_attach(dc, c, NULL);
 
 	flash_devs_run(c);
 
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -263,11 +263,13 @@ STORE(__cached_dev)
 	}
 
 	if (attr == &sysfs_attach) {
-		if (bch_parse_uuid(buf, dc->sb.set_uuid) < 16)
+		uint8_t		set_uuid[16];
+
+		if (bch_parse_uuid(buf, set_uuid) < 16)
 			return -EINVAL;
 
 		list_for_each_entry(c, &bch_cache_sets, list) {
-			v = bch_cached_dev_attach(dc, c);
+			v = bch_cached_dev_attach(dc, c, set_uuid);
 			if (!v)
 				return size;
 		}

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 044/185] bcache: return attach error when no cache set exist
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (38 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 043/185] bcache: fix for data collapse after re-attaching an attached device Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 045/185] irqchip/gic-v3: Change pr_debug message to pr_devel Greg Kroah-Hartman
                   ` (135 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tang Junhui, Michael Lyle,
	Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 7f4fc93d4713394ee8f1cd44c238e046e11b4f15 ]

I attach a back-end device to a cache set, and the cache set is not
registered yet, this back-end device did not attach successfully, and no
error returned:
[root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach
[root]#

In sysfs_attach(), the return value "v" is initialized to "size" in
the beginning, and if no cache set exist in bch_cache_sets, the "v" value
would not change any more, and return to sysfs, sysfs regard it as success
since the "size" is a positive number.

This patch fixes this issue by assigning "v" with "-ENOENT" in the
initialization.

Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/bcache/sysfs.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -191,7 +191,7 @@ STORE(__cached_dev)
 {
 	struct cached_dev *dc = container_of(kobj, struct cached_dev,
 					     disk.kobj);
-	ssize_t v = size;
+	ssize_t v;
 	struct cache_set *c;
 	struct kobj_uevent_env *env;
 
@@ -268,6 +268,7 @@ STORE(__cached_dev)
 		if (bch_parse_uuid(buf, set_uuid) < 16)
 			return -EINVAL;
 
+		v = -ENOENT;
 		list_for_each_entry(c, &bch_cache_sets, list) {
 			v = bch_cached_dev_attach(dc, c, set_uuid);
 			if (!v)
@@ -275,7 +276,7 @@ STORE(__cached_dev)
 		}
 
 		pr_err("Can't attach %s: cache set not found", buf);
-		size = v;
+		return v;
 	}
 
 	if (attr == &sysfs_detach && dc->disk.c)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 045/185] irqchip/gic-v3: Change pr_debug message to pr_devel
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (39 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 044/185] bcache: return attach error when no cache set exist Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 046/185] scsi: ufs: Enable quirk to ignore sending WRITE_SAME command Greg Kroah-Hartman
                   ` (134 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mark Salter, Marc Zyngier, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Salter <msalter@redhat.com>

[ Upstream commit b6dd4d83dc2f78cebc9a7e6e7e4bc2be4d29b94d ]

The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking
warning:

 GICv3: CPU10: ICC_SGI1R_EL1 5000400
 ======================================================
 WARNING: possible circular locking dependency detected
 4.15.0+ #1 Tainted: G        W
 ------------------------------------------------------
 dynamic_debug01/1873 is trying to acquire lock:
  ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c

 but task is already holding lock:
  (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (&rq->lock){-.-.}:
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock+0x4c/0x60
        task_fork_fair+0x3c/0x148
        sched_fork+0x10c/0x214
        copy_process.isra.32.part.33+0x4e8/0x14f0
        _do_fork+0xe8/0x78c
        kernel_thread+0x48/0x54
        rest_init+0x34/0x2a4
        start_kernel+0x45c/0x488

 -> #1 (&p->pi_lock){-.-.}:
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock_irqsave+0x58/0x70
        try_to_wake_up+0x48/0x600
        wake_up_process+0x28/0x34
        __up.isra.0+0x60/0x6c
        up+0x60/0x68
        __up_console_sem+0x4c/0x7c
        console_unlock+0x328/0x634
        vprintk_emit+0x25c/0x390
        dev_vprintk_emit+0xc4/0x1fc
        dev_printk_emit+0x88/0xa8
        __dev_printk+0x58/0x9c
        _dev_info+0x84/0xa8
        usb_new_device+0x100/0x474
        hub_port_connect+0x280/0x92c
        hub_event+0x740/0xa84
        process_one_work+0x240/0x70c
        worker_thread+0x60/0x400
        kthread+0x110/0x13c
        ret_from_fork+0x10/0x18

 -> #0 ((console_sem).lock){-...}:
        validate_chain.isra.34+0x6e4/0xa20
        __lock_acquire+0x3b4/0x6e0
        lock_acquire+0xf4/0x2a8
        _raw_spin_lock_irqsave+0x58/0x70
        down_trylock+0x20/0x4c
        __down_trylock_console_sem+0x3c/0x9c
        console_trylock+0x20/0xb0
        vprintk_emit+0x254/0x390
        vprintk_default+0x58/0x90
        vprintk_func+0xbc/0x164
        printk+0x80/0xa0
        __dynamic_pr_debug+0x84/0xac
        gic_raise_softirq+0x184/0x18c
        smp_cross_call+0xac/0x218
        smp_send_reschedule+0x3c/0x48
        resched_curr+0x60/0x9c
        check_preempt_curr+0x70/0xdc
        wake_up_new_task+0x310/0x470
        _do_fork+0x188/0x78c
        SyS_clone+0x44/0x50
        __sys_trace_return+0x0/0x4

 other info that might help us debug this:

 Chain exists of:
   (console_sem).lock --> &p->pi_lock --> &rq->lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&rq->lock);
                                lock(&p->pi_lock);
                                lock(&rq->lock);
   lock((console_sem).lock);

  *** DEADLOCK ***

 2 locks held by dynamic_debug01/1873:
  #0:  (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470
  #1:  (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc

 stack backtrace:
 CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G        W        4.15.0+ #1
 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017
 Call trace:
  dump_backtrace+0x0/0x188
  show_stack+0x24/0x2c
  dump_stack+0xa4/0xe0
  print_circular_bug.isra.31+0x29c/0x2b8
  check_prev_add.constprop.39+0x6c8/0x6dc
  validate_chain.isra.34+0x6e4/0xa20
  __lock_acquire+0x3b4/0x6e0
  lock_acquire+0xf4/0x2a8
  _raw_spin_lock_irqsave+0x58/0x70
  down_trylock+0x20/0x4c
  __down_trylock_console_sem+0x3c/0x9c
  console_trylock+0x20/0xb0
  vprintk_emit+0x254/0x390
  vprintk_default+0x58/0x90
  vprintk_func+0xbc/0x164
  printk+0x80/0xa0
  __dynamic_pr_debug+0x84/0xac
  gic_raise_softirq+0x184/0x18c
  smp_cross_call+0xac/0x218
  smp_send_reschedule+0x3c/0x48
  resched_curr+0x60/0x9c
  check_preempt_curr+0x70/0xdc
  wake_up_new_task+0x310/0x470
  _do_fork+0x188/0x78c
  SyS_clone+0x44/0x50
  __sys_trace_return+0x0/0x4
 GICv3: CPU0: ICC_SGI1R_EL1 12000

This could be fixed with printk_deferred() but that might lessen its
usefulness for debugging. So change it to pr_devel to keep it out of
production kernels. Developers working on gic-v3 can enable it as
needed in their kernels.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-gic-v3.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -488,7 +488,7 @@ static void gic_send_sgi(u64 cluster_id,
 	       MPIDR_TO_SGI_AFFINITY(cluster_id, 1)	|
 	       tlist << ICC_SGI1R_TARGET_LIST_SHIFT);
 
-	pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
+	pr_devel("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
 	gic_write_sgi1r(val);
 }
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 046/185] scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (40 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 045/185] irqchip/gic-v3: Change pr_debug message to pr_devel Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 047/185] scsi: bnx2fc: Fix check in SCSI completion handler for timed out request Greg Kroah-Hartman
                   ` (133 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sujit Reddy Thumma, Subhash Jadavani,
	Asutosh Das, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujit Reddy Thumma <sthumma@codeaurora.org>

[ Upstream commit 84af7e8b895088d89f246d6b0f82717fafdebf61 ]

WRITE_SAME command is not supported by UFS. Enable a quirk for the upper
level drivers to not send WRITE SAME command.

[mkp: botched patch, applied by hand]

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2795,6 +2795,8 @@ static int ufshcd_slave_alloc(struct scs
 	/* REPORT SUPPORTED OPERATION CODES is not supported */
 	sdev->no_report_opcodes = 1;
 
+	/* WRITE_SAME command is not supported */
+	sdev->no_write_same = 1;
 
 	ufshcd_set_queue_depth(sdev);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 047/185] scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (41 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 046/185] scsi: ufs: Enable quirk to ignore sending WRITE_SAME command Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 048/185] scsi: sym53c8xx_2: iterator underflow in sym_getsync() Greg Kroah-Hartman
                   ` (132 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chad Dupuis, Laurence Oberman,
	Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chad Dupuis <chad.dupuis@cavium.com>

[ Upstream commit ecf7ff49945f5741fa1da112f994939f942031d3 ]

When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so
that if a subsequent completion comes in on that task ID we will ignore
it.  The issue is that in the check for this flag there is a missing
return so we will continue to process a request which may have already
been returned to the ownership of the SCSI layer.  This can cause
unpredictable results.

Solution is to add in the missing return.

[mkp: typo plus title shortening]

Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/bnx2fc/bnx2fc_io.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1932,6 +1932,7 @@ void bnx2fc_process_scsi_cmd_compl(struc
 		/* we will not receive ABTS response for this IO */
 		BNX2FC_IO_DBG(io_req, "Timer context finished processing "
 			   "this scsi cmd\n");
+		return;
 	}
 
 	/* Cancel the timeout_work, as we received IO completion */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 048/185] scsi: sym53c8xx_2: iterator underflow in sym_getsync()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (42 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 047/185] scsi: bnx2fc: Fix check in SCSI completion handler for timed out request Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 049/185] scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() Greg Kroah-Hartman
                   ` (131 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Johannes Thumshirn,
	Matthew Wilcox, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit e6f791d95313c85f3dd4a26141e28e50ae9aa0ae ]

We wanted to exit the loop with "div" set to zero, but instead, if we
don't hit the break then "div" is -1 when we finish the loop.  It leads
to an array underflow a few lines later.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sym53c8xx_2/sym_hipd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -536,7 +536,7 @@ sym_getsync(struct sym_hcb *np, u_char d
 	 *  Look for the greatest clock divisor that allows an 
 	 *  input speed faster than the period.
 	 */
-	while (div-- > 0)
+	while (--div > 0)
 		if (kpc >= (div_10M[div] << 2)) break;
 
 	/*

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 049/185] scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (43 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 048/185] scsi: sym53c8xx_2: iterator underflow in sym_getsync() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 050/185] scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() Greg Kroah-Hartman
                   ` (130 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Johannes Thumshirn,
	Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit a7043e9529f3c367cc4d82997e00be034cbe57ca ]

My static checker complains about an out of bounds read:

    drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo()
    error: buffer overflow 'hd->sel_timeout' 255 <= u32max.

It's true that we probably should have a bounds check here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/message/fusion/mptctl.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -2694,6 +2694,8 @@ mptctl_hp_targetinfo(unsigned long arg)
 				__FILE__, __LINE__, iocnum);
 		return -ENODEV;
 	}
+	if (karg.hdr.id >= MPT_MAX_FC_DEVICES)
+		return -EINVAL;
 	dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n",
 	    ioc->name));
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 050/185] scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (44 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 049/185] scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 051/185] usb: gadget: f_uac2: fix bFirstInterface in composite gadget Greg Kroah-Hartman
                   ` (129 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Meelis Roos, Bart Van Assche,
	Himanshu Madhani, Laurence Oberman, Martin K. Petersen,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

[ Upstream commit c02189e12ce3bf3808cb880569d3b10249f50bd9 ]

A left shift must shift less than the bit width of the left argument.
Avoid triggering undefined behavior if ha->mbx_count == 32.

This patch avoids that UBSAN reports the following complaint:

UBSAN: Undefined behaviour in drivers/scsi/qla2xxx/qla_isr.c:275:14
shift exponent 32 is too large for 32-bit type 'int'
Call Trace:
 dump_stack+0x4e/0x6c
 ubsan_epilogue+0xd/0x3b
 __ubsan_handle_shift_out_of_bounds+0x112/0x14c
 qla2x00_mbx_completion+0x1c5/0x25d [qla2xxx]
 qla2300_intr_handler+0x1ea/0x3bb [qla2xxx]
 qla2x00_mailbox_command+0x77b/0x139a [qla2xxx]
 qla2x00_mbx_reg_test+0x83/0x114 [qla2xxx]
 qla2x00_chip_diag+0x354/0x45f [qla2xxx]
 qla2x00_initialize_adapter+0x2c2/0xa4e [qla2xxx]
 qla2x00_probe_one+0x1681/0x392e [qla2xxx]
 pci_device_probe+0x10b/0x1f1
 driver_probe_device+0x21f/0x3a4
 __driver_attach+0xa9/0xe1
 bus_for_each_dev+0x6e/0xb5
 driver_attach+0x22/0x3c
 bus_add_driver+0x1d1/0x2ae
 driver_register+0x78/0x130
 __pci_register_driver+0x75/0xa8
 qla2x00_module_init+0x21b/0x267 [qla2xxx]
 do_one_initcall+0x5a/0x1e2
 do_init_module+0x9d/0x285
 load_module+0x20db/0x38e3
 SYSC_finit_module+0xa8/0xbc
 SyS_finit_module+0x9/0xb
 do_syscall_64+0x77/0x271
 entry_SYSCALL64_slow_path+0x25/0x25

Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla2xxx/qla_isr.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -268,7 +268,8 @@ qla2x00_mbx_completion(scsi_qla_host_t *
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	/* Read all mbox registers? */
-	mboxes = (1 << ha->mbx_count) - 1;
+	WARN_ON_ONCE(ha->mbx_count > 32);
+	mboxes = (1ULL << ha->mbx_count) - 1;
 	if (!ha->mcp)
 		ql_dbg(ql_dbg_async, vha, 0x5001, "MBX pointer ERROR.\n");
 	else
@@ -2454,7 +2455,8 @@ qla24xx_mbx_completion(scsi_qla_host_t *
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 
 	/* Read all mbox registers? */
-	mboxes = (1 << ha->mbx_count) - 1;
+	WARN_ON_ONCE(ha->mbx_count > 32);
+	mboxes = (1ULL << ha->mbx_count) - 1;
 	if (!ha->mcp)
 		ql_dbg(ql_dbg_async, vha, 0x504e, "MBX pointer ERROR.\n");
 	else

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 051/185] usb: gadget: f_uac2: fix bFirstInterface in composite gadget
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (45 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 050/185] scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 052/185] usb: gadget: fsl_udc_core: fix ep valid checks Greg Kroah-Hartman
                   ` (128 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Krzysztof Opasiak, John Keeping,
	Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Keeping <john@metanate.com>

[ Upstream commit 8813a59ed892305b5ac1b5b901740b1ad4b5fefa ]

If there are multiple functions associated with a configuration, then
the UAC2 interfaces may not start at zero.  Set the correct first
interface number in the association descriptor so that the audio
interfaces are enumerated correctly in this case.

Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_uac2.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -1029,6 +1029,8 @@ afunc_bind(struct usb_configuration *cfg
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
+	iad_desc.bFirstInterface = ret;
+
 	std_ac_if_desc.bInterfaceNumber = ret;
 	agdev->ac_intf = ret;
 	agdev->ac_alt = 0;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 052/185] usb: gadget: fsl_udc_core: fix ep valid checks
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (46 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 051/185] usb: gadget: f_uac2: fix bFirstInterface in composite gadget Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 054/185] scsi: aacraid: fix shutdown crash when init fails Greg Kroah-Hartman
                   ` (127 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefan Agner, Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit 20c63f4089cceab803438c383631963e34c4d8e5 ]

Clang reports the following warning:
  drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array
  'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (ep->name)
        ~~  ~~~~^~~~

It seems that the authors intention was to check if the ep has been
configured through struct_ep_setup. Check whether struct usb_ep name
pointer has been set instead.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/fsl_udc_core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -1305,7 +1305,7 @@ static void udc_reset_ep_queue(struct fs
 {
 	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
 
-	if (ep->name)
+	if (ep->ep.name)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1693,7 +1693,7 @@ static void dtd_complete_irq(struct fsl_
 		curr_ep = get_ep_by_pipe(udc, i);
 
 		/* If the ep is configured */
-		if (curr_ep->name == NULL) {
+		if (!curr_ep->ep.name) {
 			WARNING("Invalid EP?");
 			continue;
 		}

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 054/185] scsi: aacraid: fix shutdown crash when init fails
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (47 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 052/185] usb: gadget: fsl_udc_core: fix ep valid checks Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 055/185] scsi: qla4xxx: skip error recovery in case of register disconnect Greg Kroah-Hartman
                   ` (126 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Meelis Roos, Dave Carroll,
	Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Meelis Roos <mroos@linux.ee>

[ Upstream commit 00c20cdc79259c6c5bf978b21af96c2d3edb646d ]

When aacraid init fails with "AAC0: adapter self-test failed.", shutdown
leads to UBSAN warning and then oops:

[154316.118423] ================================================================================
[154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27
[154316.118566] member access within null pointer of type 'struct Scsi_Host'
[154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G        W        4.15.0-dirty #89
[154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003
[154316.118774] Call Trace:
[154316.118848]  dump_stack+0x48/0x65
[154316.118916]  ubsan_epilogue+0xe/0x40
[154316.118976]  __ubsan_handle_type_mismatch+0xfb/0x180
[154316.119043]  scsi_block_requests+0x20/0x30
[154316.119135]  aac_shutdown+0x18/0x40 [aacraid]
[154316.119196]  pci_device_shutdown+0x33/0x50
[154316.119269]  device_shutdown+0x18a/0x390
[...]
[154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4
[154316.123515] IP: scsi_block_requests+0xa/0x30

This is because aac_shutdown() does

        struct Scsi_Host *shost = pci_get_drvdata(dev);
        scsi_block_requests(shost);

and that assumes shost has been assigned with pci_set_drvdata().

However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far
after bailing out with error from calling the init function
((*aac_drivers[index].init)(aac)), and when the init function fails, no
error is returned from aac_probe_one() so PCI layer assumes there is
driver attached, and tries to shut it down later.

Fix it by returning error from aac_probe_one() when card-specific init
function fails.

This fixes reboot on my HP NetRAID-4M with dead battery.

Signed-off-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/aacraid/linit.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1172,8 +1172,10 @@ static int aac_probe_one(struct pci_dev
 	 *	Map in the registers from the adapter.
 	 */
 	aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
-	if ((*aac_drivers[index].init)(aac))
+	if ((*aac_drivers[index].init)(aac)) {
+		error = -ENODEV;
 		goto out_unmap;
+	}
 
 	if (aac->sync_mode) {
 		if (aac_sync_mode)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 055/185] scsi: qla4xxx: skip error recovery in case of register disconnect.
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (48 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 054/185] scsi: aacraid: fix shutdown crash when init fails Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 056/185] ARM: OMAP3: Fix prm wake interrupt for resume Greg Kroah-Hartman
                   ` (125 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Manish Rangankar, Ewan D. Milne,
	Tomas Henzl, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manish Rangankar <manish.rangankar@cavium.com>

[ Upstream commit 1bc5ad3a6acdcf56f83272f2de1cd2389ea9e9e2 ]

A system crashes when continuously removing/re-adding the storage
controller.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/qla4xxx/ql4_def.h |    2 +
 drivers/scsi/qla4xxx/ql4_os.c  |   46 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)

--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -167,6 +167,8 @@
 #define DEV_DB_NON_PERSISTENT	0
 #define DEV_DB_PERSISTENT	1
 
+#define QL4_ISP_REG_DISCONNECT 0xffffffffU
+
 #define COPY_ISID(dst_isid, src_isid) {			\
 	int i, j;					\
 	for (i = 0, j = ISID_SIZE - 1; i < ISID_SIZE;)	\
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -268,6 +268,24 @@ static struct iscsi_transport qla4xxx_is
 
 static struct scsi_transport_template *qla4xxx_scsi_transport;
 
+static int qla4xxx_isp_check_reg(struct scsi_qla_host *ha)
+{
+	u32 reg_val = 0;
+	int rval = QLA_SUCCESS;
+
+	if (is_qla8022(ha))
+		reg_val = readl(&ha->qla4_82xx_reg->host_status);
+	else if (is_qla8032(ha) || is_qla8042(ha))
+		reg_val = qla4_8xxx_rd_direct(ha, QLA8XXX_PEG_ALIVE_COUNTER);
+	else
+		reg_val = readw(&ha->reg->ctrl_status);
+
+	if (reg_val == QL4_ISP_REG_DISCONNECT)
+		rval = QLA_ERROR;
+
+	return rval;
+}
+
 static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num,
 			     uint32_t iface_type, uint32_t payload_size,
 			     uint32_t pid, struct sockaddr *dst_addr)
@@ -9230,10 +9248,17 @@ static int qla4xxx_eh_abort(struct scsi_
 	struct srb *srb = NULL;
 	int ret = SUCCESS;
 	int wait = 0;
+	int rval;
 
 	ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%llu: Abort command issued cmd=%p, cdb=0x%x\n",
 		   ha->host_no, id, lun, cmd, cmd->cmnd[0]);
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 	srb = (struct srb *) CMD_SP(cmd);
 	if (!srb) {
@@ -9285,6 +9310,7 @@ static int qla4xxx_eh_device_reset(struc
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	struct ddb_entry *ddb_entry = cmd->device->hostdata;
 	int ret = FAILED, stat;
+	int rval;
 
 	if (!ddb_entry)
 		return ret;
@@ -9304,6 +9330,12 @@ static int qla4xxx_eh_device_reset(struc
 		      cmd, jiffies, cmd->request->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	/* FIXME: wait for hba to go online */
 	stat = qla4xxx_reset_lun(ha, ddb_entry, cmd->device->lun);
 	if (stat != QLA_SUCCESS) {
@@ -9347,6 +9379,7 @@ static int qla4xxx_eh_target_reset(struc
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
 	struct ddb_entry *ddb_entry = cmd->device->hostdata;
 	int stat, ret;
+	int rval;
 
 	if (!ddb_entry)
 		return FAILED;
@@ -9364,6 +9397,12 @@ static int qla4xxx_eh_target_reset(struc
 		      ha->host_no, cmd, jiffies, cmd->request->timeout / HZ,
 		      ha->dpc_flags, cmd->result, cmd->allowed));
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	stat = qla4xxx_reset_target(ha, ddb_entry);
 	if (stat != QLA_SUCCESS) {
 		starget_printk(KERN_INFO, scsi_target(cmd->device),
@@ -9418,9 +9457,16 @@ static int qla4xxx_eh_host_reset(struct
 {
 	int return_status = FAILED;
 	struct scsi_qla_host *ha;
+	int rval;
 
 	ha = to_qla_host(cmd->device->host);
 
+	rval = qla4xxx_isp_check_reg(ha);
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha, "PCI/Register disconnect, exiting.\n");
+		return FAILED;
+	}
+
 	if ((is_qla8032(ha) || is_qla8042(ha)) && ql4xdontresethba)
 		qla4_83xx_set_idc_dontreset(ha);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 056/185] ARM: OMAP3: Fix prm wake interrupt for resume
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (49 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 055/185] scsi: qla4xxx: skip error recovery in case of register disconnect Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 057/185] ARM: OMAP1: clock: Fix debugfs_create_*() usage Greg Kroah-Hartman
                   ` (124 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grygorii Strashko, Tero Kristo,
	Tony Lindgren, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit d3be6d2a08bd26580562d9714d3d97ea9ba22c73 ]

For platform_suspend_ops, the finish call is too late to re-enable wake
irqs and we need re-enable wake irqs on wake call instead.

Otherwise noirq resume for devices has already happened. And then
dev_pm_disarm_wake_irq() has already disabled the dedicated wake irqs
when the interrupt triggers and the wake irq is never handled.

For devices that are already in PM runtime suspended state when we
enter suspend this means that a possible wake irq will never trigger.

And this can lead into a situation where a device has a pending padconf
wake irq, and the device will stay unresponsive to any further wake
irqs.

This issue can be easily reproduced by setting serial console log level
to zero, letting the serial console idle, and suspend the system from
an ssh terminal. Then try to wake up the system by typing to the serial
console.

Note that this affects only omap3 PRM interrupt as that's currently
the only omap variant that does anything in omap_pm_wake().

In general, for the wake irqs to work, the interrupt must have either
IRQF_NO_SUSPEND or IRQF_EARLY_RESUME set for it to trigger before
dev_pm_disarm_wake_irq() disables the wake irqs.

Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap2/pm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -231,7 +231,7 @@ static void omap_pm_end(void)
 	cpu_idle_poll_ctrl(false);
 }
 
-static void omap_pm_finish(void)
+static void omap_pm_wake(void)
 {
 	if (cpu_is_omap34xx())
 		omap_prcm_irq_complete();
@@ -241,7 +241,7 @@ static const struct platform_suspend_ops
 	.begin		= omap_pm_begin,
 	.end		= omap_pm_end,
 	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
+	.wake		= omap_pm_wake,
 	.valid		= suspend_valid_only_mem,
 };
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 057/185] ARM: OMAP1: clock: Fix debugfs_create_*() usage
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (50 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 056/185] ARM: OMAP3: Fix prm wake interrupt for resume Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 058/185] NFC: llcp: Limit size of SDP URI Greg Kroah-Hartman
                   ` (123 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Aaro Koskinen,
	Tony Lindgren, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 8cbbf1745dcde7ba7e423dc70619d223de90fd43 ]

When exposing data access through debugfs, the correct
debugfs_create_*() functions must be used, depending on data type.

Remove all casts from data pointers passed to debugfs_create_*()
functions, as such casts prevent the compiler from flagging bugs.

Correct all wrong usage:
  - clk.rate is unsigned long, not u32,
  - clk.flags is u8, not u32, which exposed the successive
    clk.rate_offset and clk.src_offset fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap1/clock.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1031,17 +1031,17 @@ static int clk_debugfs_register_one(stru
 		return -ENOMEM;
 	c->dent = d;
 
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 058/185] NFC: llcp: Limit size of SDP URI
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (51 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 057/185] ARM: OMAP1: clock: Fix debugfs_create_*() usage Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 059/185] mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 Greg Kroah-Hartman
                   ` (122 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kees Cook, David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

[ Upstream commit fe9c842695e26d8116b61b80bfb905356f07834b ]

The tlv_len is u8, so we need to limit the size of the SDP URI. Enforce
this both in the NLA policy and in the code that performs the allocation
and copy, to avoid writing past the end of the allocated buffer.

Fixes: d9b8d8e19b073 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/nfc/llcp_commands.c |    4 ++++
 net/nfc/netlink.c       |    3 ++-
 2 files changed, 6 insertions(+), 1 deletion(-)

--- a/net/nfc/llcp_commands.c
+++ b/net/nfc/llcp_commands.c
@@ -149,6 +149,10 @@ struct nfc_llcp_sdp_tlv *nfc_llcp_build_
 
 	pr_debug("uri: %s, len: %zu\n", uri, uri_len);
 
+	/* sdreq->tlv_len is u8, takes uri_len, + 3 for header, + 1 for NULL */
+	if (WARN_ON_ONCE(uri_len > U8_MAX - 4))
+		return NULL;
+
 	sdreq = kzalloc(sizeof(struct nfc_llcp_sdp_tlv), GFP_KERNEL);
 	if (sdreq == NULL)
 		return NULL;
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -60,7 +60,8 @@ static const struct nla_policy nfc_genl_
 };
 
 static const struct nla_policy nfc_sdp_genl_policy[NFC_SDP_ATTR_MAX + 1] = {
-	[NFC_SDP_ATTR_URI] = { .type = NLA_STRING },
+	[NFC_SDP_ATTR_URI] = { .type = NLA_STRING,
+			       .len = U8_MAX - 4 },
 	[NFC_SDP_ATTR_SAP] = { .type = NLA_U8 },
 };
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 059/185] mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (52 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 058/185] NFC: llcp: Limit size of SDP URI Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 060/185] md raid10: fix NULL deference in handle_write_completed() Greg Kroah-Hartman
                   ` (121 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Felix Fietkau, Johannes Berg, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 651b9920d7a694ffb1f885aef2bbb068a25d9d66 ]

This ensures that mac80211 allocated management frames are properly
aligned, which makes copying them more efficient.
For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon
template memory on the chip.
Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be
avoided.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/mac80211.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3368,7 +3368,7 @@ static inline int ieee80211_sta_ps_trans
  * The TX headroom reserved by mac80211 for its own tx_status functions.
  * This is enough for the radiotap header.
  */
-#define IEEE80211_TX_STATUS_HEADROOM	14
+#define IEEE80211_TX_STATUS_HEADROOM	ALIGN(14, 4)
 
 /**
  * ieee80211_sta_set_buffered - inform mac80211 about driver-buffered frames

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 060/185] md raid10: fix NULL deference in handle_write_completed()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (53 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 059/185] mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 061/185] drm/exynos: fix comparison to bitshift when dealing with a mask Greg Kroah-Hartman
                   ` (120 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, NeilBrown, Yufen Yu, Shaohua Li, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 01a69cab01c184d3786af09e9339311123d63d22 ]

In the case of 'recover', an r10bio with R10BIO_WriteError &
R10BIO_IsRecover will be progressed by handle_write_completed().
This function traverses all r10bio->devs[copies].
If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement
is also not NULL. However, this is not always true.

When there is an rdev of raid10 has replacement, then each r10bio
->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover',
even if corresponded replacement is NULL, it doesn't clear r10bio
->devs[m].repl_bio, resulting in replacement NULL deference.

This bug was introduced when replacement support for raid10 was
added in Linux 3.3.

As NeilBrown suggested:
	Elsewhere the determination of "is this device part of the
	resync/recovery" is made by resting bio->bi_end_io.
	If this is end_sync_write, then we tried to write here.
	If it is NULL, then we didn't try to write.

Fixes: 9ad1aefc8ae8 ("md/raid10:  Handle replacement devices during resync.")
Cc: stable (V3.3+)
Suggested-by: NeilBrown <neilb@suse.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid10.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2754,7 +2754,8 @@ static void handle_write_completed(struc
 		for (m = 0; m < conf->copies; m++) {
 			int dev = r10_bio->devs[m].devnum;
 			rdev = conf->mirrors[dev].rdev;
-			if (r10_bio->devs[m].bio == NULL)
+			if (r10_bio->devs[m].bio == NULL ||
+				r10_bio->devs[m].bio->bi_end_io == NULL)
 				continue;
 			if (test_bit(BIO_UPTODATE,
 				     &r10_bio->devs[m].bio->bi_flags)) {
@@ -2770,7 +2771,8 @@ static void handle_write_completed(struc
 					md_error(conf->mddev, rdev);
 			}
 			rdev = conf->mirrors[dev].replacement;
-			if (r10_bio->devs[m].repl_bio == NULL)
+			if (r10_bio->devs[m].repl_bio == NULL ||
+				r10_bio->devs[m].repl_bio->bi_end_io == NULL)
 				continue;
 			if (test_bit(BIO_UPTODATE,
 				     &r10_bio->devs[m].repl_bio->bi_flags)) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 061/185] drm/exynos: fix comparison to bitshift when dealing with a mask
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (54 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 060/185] md raid10: fix NULL deference in handle_write_completed() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 062/185] drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions Greg Kroah-Hartman
                   ` (119 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Wolfram Sang, Inki Dae, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 1293b6191010672c0c9dacae8f71c6f3e4d70cbe ]

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/exynos/regs-fimc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/exynos/regs-fimc.h
+++ b/drivers/gpu/drm/exynos/regs-fimc.h
@@ -569,7 +569,7 @@
 #define EXYNOS_CIIMGEFF_FIN_EMBOSSING		(4 << 26)
 #define EXYNOS_CIIMGEFF_FIN_SILHOUETTE		(5 << 26)
 #define EXYNOS_CIIMGEFF_FIN_MASK			(7 << 26)
-#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK		((0xff < 13) | (0xff < 0))
+#define EXYNOS_CIIMGEFF_PAT_CBCR_MASK		((0xff << 13) | (0xff << 0))
 
 /* Real input DMA size register */
 #define EXYNOS_CIREAL_ISIZE_AUTOLOAD_ENABLE	(1 << 31)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 062/185] drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (55 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 061/185] drm/exynos: fix comparison to bitshift when dealing with a mask Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 063/185] locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() Greg Kroah-Hartman
                   ` (118 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Markus Elfring, Inki Dae, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markus Elfring <elfring@users.sourceforge.net>

[ Upstream commit 6f0a60298bbbea43ab5e3955913ab19c153076f3 ]

Omit an extra message for a memory allocation failure in these functions.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/exynos/exynos_drm_g2d.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -268,7 +268,6 @@ static int g2d_init_cmdlist(struct g2d_d
 
 	node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL);
 	if (!node) {
-		dev_err(dev, "failed to allocate memory\n");
 		ret = -ENOMEM;
 		goto err;
 	}
@@ -1264,10 +1263,9 @@ int exynos_g2d_exec_ioctl(struct drm_dev
 		return -EFAULT;
 
 	runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL);
-	if (!runqueue_node) {
-		dev_err(dev, "failed to allocate memory\n");
+	if (!runqueue_node)
 		return -ENOMEM;
-	}
+
 	run_cmdlist = &runqueue_node->run_cmdlist;
 	event_list = &runqueue_node->event_list;
 	INIT_LIST_HEAD(run_cmdlist);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 063/185] locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (56 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 062/185] drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 064/185] kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE Greg Kroah-Hartman
                   ` (117 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrea Parri, Peter Zijlstra,
	Paul E. McKenney, Alan Stern, Ivan Kokshaysky, Linus Torvalds,
	Matt Turner, Richard Henderson, Thomas Gleixner, Will Deacon,
	linux-alpha, Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrea Parri <parri.andrea@gmail.com>

[ Upstream commit cb13b424e986aed68d74cbaec3449ea23c50e167 ]

Continuing along with the fight against smp_read_barrier_depends() [1]
(or rather, against its improper use), add an unconditional barrier to
cmpxchg.  This guarantees that dependency ordering is preserved when a
dependency is headed by an unsuccessful cmpxchg.  As it turns out, the
change could enable further simplification of LKMM as proposed in [2].

[1] https://marc.info/?l=linux-kernel&m=150884953419377&w=2
    https://marc.info/?l=linux-kernel&m=150884946319353&w=2
    https://marc.info/?l=linux-kernel&m=151215810824468&w=2
    https://marc.info/?l=linux-kernel&m=151215816324484&w=2

[2] https://marc.info/?l=linux-kernel&m=151881978314872&w=2

Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519152356-4804-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/alpha/include/asm/xchg.h |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/arch/alpha/include/asm/xchg.h
+++ b/arch/alpha/include/asm/xchg.h
@@ -127,10 +127,9 @@ ____xchg(, volatile void *ptr, unsigned
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  *
- * The memory barrier should be placed in SMP only when we actually
- * make the change. If we don't change anything (so if the returned
- * prev is equal to old) then we aren't acquiring anything new and
- * we don't need any memory barrier as far I can tell.
+ * The memory barrier is placed in SMP unconditionally, in order to
+ * guarantee that dependency ordering is preserved when a dependency
+ * is headed by an unsuccessful operation.
  */
 
 static inline unsigned long
@@ -149,8 +148,8 @@ ____cmpxchg(_u8, volatile char *m, unsig
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -176,8 +175,8 @@ ____cmpxchg(_u16, volatile short *m, uns
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -199,8 +198,8 @@ ____cmpxchg(_u32, volatile int *m, int o
 	"	mov %4,%1\n"
 	"	stl_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
@@ -222,8 +221,8 @@ ____cmpxchg(_u64, volatile long *m, unsi
 	"	mov %4,%1\n"
 	"	stq_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 064/185] kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (57 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 063/185] locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 065/185] s390/cio: fix return code after missing interrupt Greg Kroah-Hartman
                   ` (116 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, David Rientjes, Andrew Morton,
	Jens Axboe, Dave Jiang, Al Viro, Dan Carpenter, Linus Torvalds,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>

[ Upstream commit 88913bd8ea2a75d7e460a4bed5f75e1c32660d7e ]

chan->n_subbufs is set by the user and relay_create_buf() does a kmalloc()
of chan->n_subbufs * sizeof(size_t *).

kmalloc_slab() will generate a warning when this fails if
chan->subbufs * sizeof(size_t *) > KMALLOC_MAX_SIZE.

Limit chan->n_subbufs to the maximum allowed kmalloc() size.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1802061216100.122576@chino.kir.corp.google.com
Fixes: f6302f1bcd75 ("relay: prevent integer overflow in relay_open()")
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/relay.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -166,7 +166,7 @@ static struct rchan_buf *relay_create_bu
 {
 	struct rchan_buf *buf;
 
-	if (chan->n_subbufs > UINT_MAX / sizeof(size_t *))
+	if (chan->n_subbufs > KMALLOC_MAX_SIZE / sizeof(size_t *))
 		return NULL;
 
 	buf = kzalloc(sizeof(struct rchan_buf), GFP_KERNEL);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 065/185] s390/cio: fix return code after missing interrupt
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (58 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 064/185] kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 066/185] s390/cio: clear timer when terminating driver I/O Greg Kroah-Hartman
                   ` (115 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Julian Wiedmann, Sebastian Ott,
	Martin Schwidefsky, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Ott <sebott@linux.vnet.ibm.com>

[ Upstream commit 770b55c995d171f026a9efb85e71e3b1ea47b93d ]

When a timeout occurs for users of ccw_device_start_timeout
we will stop the IO and call the drivers int handler with
the irb pointer set to ERR_PTR(-ETIMEDOUT). Sometimes
however we'd set the irb pointer to ERR_PTR(-EIO) which is
not intended. Just set the correct value in all codepaths.

Reported-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/cio/device_fsm.c |    6 ++++--
 drivers/s390/cio/io_sch.h     |    1 +
 2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -784,6 +784,7 @@ ccw_device_online_timeout(struct ccw_dev
 
 	ccw_device_set_timeout(cdev, 0);
 	cdev->private->iretry = 255;
+	cdev->private->async_kill_io_rc = -ETIMEDOUT;
 	ret = ccw_device_cancel_halt_clear(cdev);
 	if (ret == -EBUSY) {
 		ccw_device_set_timeout(cdev, 3*HZ);
@@ -860,7 +861,7 @@ ccw_device_killing_irq(struct ccw_device
 	/* OK, i/o is dead now. Call interrupt handler. */
 	if (cdev->handler)
 		cdev->handler(cdev, cdev->private->intparm,
-			      ERR_PTR(-EIO));
+			      ERR_PTR(cdev->private->async_kill_io_rc));
 }
 
 static void
@@ -877,7 +878,7 @@ ccw_device_killing_timeout(struct ccw_de
 	ccw_device_online_verify(cdev, 0);
 	if (cdev->handler)
 		cdev->handler(cdev, cdev->private->intparm,
-			      ERR_PTR(-EIO));
+			      ERR_PTR(cdev->private->async_kill_io_rc));
 }
 
 void ccw_device_kill_io(struct ccw_device *cdev)
@@ -885,6 +886,7 @@ void ccw_device_kill_io(struct ccw_devic
 	int ret;
 
 	cdev->private->iretry = 255;
+	cdev->private->async_kill_io_rc = -EIO;
 	ret = ccw_device_cancel_halt_clear(cdev);
 	if (ret == -EBUSY) {
 		ccw_device_set_timeout(cdev, 3*HZ);
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -155,6 +155,7 @@ struct ccw_device_private {
 	unsigned long intparm;	/* user interruption parameter */
 	struct qdio_irq *qdio_data;
 	struct irb irb;		/* device status */
+	int async_kill_io_rc;
 	struct senseid senseid;	/* SenseID info */
 	struct pgid pgid[8];	/* path group IDs per chpid*/
 	struct ccw1 iccws[2];	/* ccws for SNID/SID/SPGID commands */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 066/185] s390/cio: clear timer when terminating driver I/O
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (59 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 065/185] s390/cio: fix return code after missing interrupt Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 067/185] ARM: OMAP: Fix dmtimer init for omap1 Greg Kroah-Hartman
                   ` (114 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sebastian Ott, Martin Schwidefsky,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Ott <sebott@linux.vnet.ibm.com>

[ Upstream commit 410d5e13e7638bc146321671e223d56495fbf3c7 ]

When we terminate driver I/O (because we need to stop using a certain
channel path) we also need to ensure that a timer (which may have been
set up using ccw_device_start_timeout) is cleared.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/s390/cio/device_fsm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -885,6 +885,7 @@ void ccw_device_kill_io(struct ccw_devic
 {
 	int ret;
 
+	ccw_device_set_timeout(cdev, 0);
 	cdev->private->iretry = 255;
 	cdev->private->async_kill_io_rc = -EIO;
 	ret = ccw_device_cancel_halt_clear(cdev);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 067/185] ARM: OMAP: Fix dmtimer init for omap1
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (60 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 066/185] s390/cio: clear timer when terminating driver I/O Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 068/185] smsc75xx: fix smsc75xx_set_features() Greg Kroah-Hartman
                   ` (113 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Keerthy,
	Ladislav Michl, Tony Lindgren, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit ba6887836178d43b3665b9da075c2c5dfe1d207c ]

We need to enable PM runtime on omap1 also as otherwise we
will get errors:

omap_timer omap_timer.1: omap_dm_timer_probe: pm_runtime_get_sync failed!
omap_timer: probe of omap_timer.1 failed with error -13
...

We are checking for OMAP_TIMER_NEEDS_RESET flag elsewhere so this is
safe to do.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/plat-omap/dmtimer.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -853,11 +853,8 @@ static int omap_dm_timer_probe(struct pl
 	timer->irq = irq->start;
 	timer->pdev = pdev;
 
-	/* Skip pm_runtime_enable for OMAP1 */
-	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
-		pm_runtime_enable(dev);
-		pm_runtime_irq_safe(dev);
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_irq_safe(dev);
 
 	if (!timer->reserved) {
 		pm_runtime_get_sync(dev);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 068/185] smsc75xx: fix smsc75xx_set_features()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (61 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 067/185] ARM: OMAP: Fix dmtimer init for omap1 Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 069/185] regulatory: add NUL to request alpha2 Greg Kroah-Hartman
                   ` (112 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Steve Glendinning,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 88e80c62671ceecdbb77c902731ec95a4bfa62f9 ]

If an attempt is made to disable RX checksums, USB adapter is changed
but netdev->features is not, because smsc75xx_set_features() returns a
non zero value.

This throws errors from netdev_rx_csum_fault() :
<devname>: hw csum failure

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/smsc75xx.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -945,10 +945,11 @@ static int smsc75xx_set_features(struct
 	/* it's racing here! */
 
 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
-	if (ret < 0)
+	if (ret < 0) {
 		netdev_warn(dev->net, "Error writing RFE_CTL\n");
-
-	return ret;
+		return ret;
+	}
+	return 0;
 }
 
 static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 069/185] regulatory: add NUL to request alpha2
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (62 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 068/185] smsc75xx: fix smsc75xx_set_features() Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 070/185] locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs Greg Kroah-Hartman
                   ` (111 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kees Cook, Johannes Berg, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 657308f73e674e86b60509a430a46e569bf02846 ]

Similar to the ancient commit a5fe8e7695dc ("regulatory: add NUL
to alpha2"), add another byte to alpha2 in the request struct so
that when we use nla_put_string(), we don't overrun anything.

Fixes: 73d54c9e74c4 ("cfg80211: add regulatory netlink multicast group")
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/regulatory.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -78,7 +78,7 @@ struct regulatory_request {
 	int wiphy_idx;
 	enum nl80211_reg_initiator initiator;
 	enum nl80211_user_reg_hint_type user_reg_hint_type;
-	char alpha2[2];
+	char alpha2[3];
 	enum nl80211_dfs_regions dfs_region;
 	bool intersect;
 	bool processed;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 070/185] locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (63 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 069/185] regulatory: add NUL to request alpha2 Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 071/185] x86/topology: Update the cpu cores field in /proc/cpuinfo correctly across CPU hotplug operations Greg Kroah-Hartman
                   ` (110 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Will Deacon, Andrea Parri,
	Paul E. McKenney, Alan Stern, Andrew Morton, Ivan Kokshaysky,
	Linus Torvalds, Matt Turner, Peter Zijlstra, Richard Henderson,
	Thomas Gleixner, linux-alpha, Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrea Parri <parri.andrea@gmail.com>

[ Upstream commit 472e8c55cf6622d1c112dc2bc777f68bbd4189db ]

Successful RMW operations are supposed to be fully ordered, but
Alpha's xchg() and cmpxchg() do not meet this requirement.

Will Deacon noticed the bug:

  > So MP using xchg:
  >
  > WRITE_ONCE(x, 1)
  > xchg(y, 1)
  >
  > smp_load_acquire(y) == 1
  > READ_ONCE(x) == 0
  >
  > would be allowed.

... which thus violates the above requirement.

Fix it by adding a leading smp_mb() to the xchg() and cmpxchg() implementations.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/1519291488-5752-1-git-send-email-parri.andrea@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/alpha/include/asm/xchg.h |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/arch/alpha/include/asm/xchg.h
+++ b/arch/alpha/include/asm/xchg.h
@@ -11,6 +11,10 @@
  * Atomic exchange.
  * Since it can be used to implement critical sections
  * it must clobber "memory" (also for interrupts in UP).
+ *
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
  */
 
 static inline unsigned long
@@ -18,6 +22,7 @@ ____xchg(_u8, volatile char *m, unsigned
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	insbl	%1,%4,%1\n"
@@ -42,6 +47,7 @@ ____xchg(_u16, volatile short *m, unsign
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	inswl	%1,%4,%1\n"
@@ -66,6 +72,7 @@ ____xchg(_u32, volatile int *m, unsigned
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -86,6 +93,7 @@ ____xchg(_u64, volatile long *m, unsigne
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -127,9 +135,12 @@ ____xchg(, volatile void *ptr, unsigned
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  *
- * The memory barrier is placed in SMP unconditionally, in order to
- * guarantee that dependency ordering is preserved when a dependency
- * is headed by an unsuccessful operation.
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
+ * The trailing memory barrier is placed in SMP unconditionally, in
+ * order to guarantee that dependency ordering is preserved when a
+ * dependency is headed by an unsuccessful operation.
  */
 
 static inline unsigned long
@@ -137,6 +148,7 @@ ____cmpxchg(_u8, volatile char *m, unsig
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	insbl	%1,%5,%1\n"
@@ -164,6 +176,7 @@ ____cmpxchg(_u16, volatile short *m, uns
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	inswl	%1,%5,%1\n"
@@ -191,6 +204,7 @@ ____cmpxchg(_u32, volatile int *m, int o
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -214,6 +228,7 @@ ____cmpxchg(_u64, volatile long *m, unsi
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 071/185] x86/topology: Update the cpu cores field in /proc/cpuinfo correctly across CPU hotplug operations
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (64 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 070/185] locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 072/185] media: dmxdev: fix error code for invalid ioctls Greg Kroah-Hartman
                   ` (109 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dou Liyang, Samuel Neves,
	Linus Torvalds, Peter Zijlstra, Thomas Gleixner, jgross, luto,
	prarit, vkuznets, Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Samuel Neves <sneves@dei.uc.pt>

[ Upstream commit 4596749339e06dc7a424fc08a15eded850ed78b7 ]

Without this fix, /proc/cpuinfo will display an incorrect amount
of CPU cores, after bringing them offline and online again, as
exemplified below:

  $ cat /proc/cpuinfo | grep cores
  cpu cores	: 4
  cpu cores	: 8
  cpu cores	: 8
  cpu cores	: 20
  cpu cores	: 4
  cpu cores	: 3
  cpu cores	: 2
  cpu cores	: 2

This patch fixes this by always zeroing the booted_cores variable
upon turning off a logical CPU.

Tested-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jgross@suse.com
Cc: luto@kernel.org
Cc: prarit@redhat.com
Cc: vkuznets@redhat.com
Link: http://lkml.kernel.org/r/20180221205036.5244-1-sneves@dei.uc.pt
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/smpboot.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1290,6 +1290,7 @@ static void remove_siblinginfo(int cpu)
 	cpumask_clear(cpu_core_mask(cpu));
 	c->phys_proc_id = 0;
 	c->cpu_core_id = 0;
+	c->booted_cores = 0;
 	cpumask_clear_cpu(cpu, cpu_sibling_setup_mask);
 }
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 072/185] media: dmxdev: fix error code for invalid ioctls
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (65 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 071/185] x86/topology: Update the cpu cores field in /proc/cpuinfo correctly across CPU hotplug operations Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 073/185] md/raid1: fix NULL pointer dereference Greg Kroah-Hartman
                   ` (108 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mauro Carvalho Chehab, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[ Upstream commit a145f64c6107d3aa5a7cec9f8977d04ac2a896c9 ]

Returning -EINVAL when an ioctl is not implemented is a very
bad idea, as it is hard to distinguish from other error
contitions that an ioctl could lead. Replace it by its
right error code: -ENOTTY.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-core/dmxdev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/dvb-core/dmxdev.c
+++ b/drivers/media/dvb-core/dmxdev.c
@@ -1069,7 +1069,7 @@ static int dvb_demux_do_ioctl(struct fil
 		break;
 
 	default:
-		ret = -EINVAL;
+		ret = -ENOTTY;
 		break;
 	}
 	mutex_unlock(&dmxdev->mutex);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 073/185] md/raid1: fix NULL pointer dereference
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (66 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 072/185] media: dmxdev: fix error code for invalid ioctls Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 074/185] batman-adv: fix packet checksum in receive path Greg Kroah-Hartman
                   ` (107 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, NeilBrown, Yufen Yu, Shaohua Li, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yufen Yu <yuyufen@huawei.com>

[ Upstream commit 3de59bb9d551428cbdc76a9ea57883f82e350b4d ]

In handle_write_finished(), if r1_bio->bios[m] != NULL, it thinks
the corresponding conf->mirrors[m].rdev is also not NULL. But, it
is not always true.

Even if some io hold replacement rdev(i.e. rdev->nr_pending.count > 0),
raid1_remove_disk() can also set the rdev as NULL. That means,
bios[m] != NULL, but mirrors[m].rdev is NULL, resulting in NULL
pointer dereference in handle_write_finished and sync_request_write.

This patch can fix BUGs as follows:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000140
 IP: [<ffffffff815bbbbd>] raid1d+0x2bd/0xfc0
 PGD 12ab52067 PUD 12f587067 PMD 0
 Oops: 0000 [#1] SMP
 CPU: 1 PID: 2008 Comm: md3_raid1 Not tainted 4.1.44+ #130
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
 Call Trace:
  ? schedule+0x37/0x90
  ? prepare_to_wait_event+0x83/0xf0
  md_thread+0x144/0x150
  ? wake_atomic_t_function+0x70/0x70
  ? md_start_sync+0xf0/0xf0
  kthread+0xd8/0xf0
  ? kthread_worker_fn+0x160/0x160
  ret_from_fork+0x42/0x70
  ? kthread_worker_fn+0x160/0x160

 BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
 IP: sync_request_write+0x9e/0x980
 PGD 800000007c518067 P4D 800000007c518067 PUD 8002b067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 24 PID: 2549 Comm: md3_raid1 Not tainted 4.15.0+ #118
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
 Call Trace:
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0xc/0xb0
  ? flush_pending_writes+0x3a/0xd0
  ? pick_next_task_fair+0x4d5/0x5f0
  ? __switch_to+0xa2/0x430
  raid1d+0x65a/0x870
  ? find_pers+0x70/0x70
  ? find_pers+0x70/0x70
  ? md_thread+0x11c/0x160
  md_thread+0x11c/0x160
  ? finish_wait+0x80/0x80
  kthread+0x111/0x130
  ? kthread_create_worker_on_cpu+0x70/0x70
  ? do_syscall_64+0x6f/0x190
  ? SyS_exit_group+0x10/0x10
  ret_from_fork+0x35/0x40

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid1.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1722,6 +1722,17 @@ static int raid1_remove_disk(struct mdde
 			struct md_rdev *repl =
 				conf->mirrors[conf->raid_disks + number].rdev;
 			freeze_array(conf, 0);
+			if (atomic_read(&repl->nr_pending)) {
+				/* It means that some queued IO of retry_list
+				 * hold repl. Thus, we cannot set replacement
+				 * as NULL, avoiding rdev NULL pointer
+				 * dereference in sync_request_write and
+				 * handle_write_finished.
+				 */
+				err = -EBUSY;
+				unfreeze_array(conf);
+				goto abort;
+			}
 			clear_bit(Replacement, &repl->flags);
 			p->rdev = repl;
 			conf->mirrors[conf->raid_disks + number].rdev = NULL;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 074/185] batman-adv: fix packet checksum in receive path
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (67 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 073/185] md/raid1: fix NULL pointer dereference Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 075/185] batman-adv: invalidate checksum on fragment reassembly Greg Kroah-Hartman
                   ` (106 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maximilian Wilhelm,
	Matthias Schiffer, Sven Eckelmann, Simon Wunderlich, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schiffer <mschiffer@universe-factory.net>

[ Upstream commit abd6360591d3f8259f41c34e31ac4826dfe621b8 ]

eth_type_trans() internally calls skb_pull(), which does not adjust the
skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the
form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are
received.

Note that in usual setups, packets don't reach batman-adv with
CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see
batadv's ethtype?), which is why the log messages do not occur on every
system using batman-adv. I could reproduce this issue by stacking
batman-adv on top of a VXLAN interface.

Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Tested-by: Maximilian Wilhelm <max@sdn.clinic>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/soft-interface.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -401,13 +401,7 @@ void batadv_interface_rx(struct net_devi
 
 	/* skb->dev & skb->pkt_type are set here */
 	skb->protocol = eth_type_trans(skb, soft_iface);
-
-	/* should not be necessary anymore as we use skb_pull_rcsum()
-	 * TODO: please verify this and remove this TODO
-	 * -- Dec 21st 2009, Simon Wunderlich
-	 */
-
-	/* skb->ip_summed = CHECKSUM_UNNECESSARY; */
+	skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
 
 	batadv_inc_counter(bat_priv, BATADV_CNT_RX);
 	batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 075/185] batman-adv: invalidate checksum on fragment reassembly
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (68 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 074/185] batman-adv: fix packet checksum in receive path Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 076/185] netfilter: ebtables: convert BUG_ONs to WARN_ONs Greg Kroah-Hartman
                   ` (105 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maximilian Wilhelm,
	Matthias Schiffer, Sven Eckelmann, Simon Wunderlich, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schiffer <mschiffer@universe-factory.net>

[ Upstream commit 3bf2a09da956b43ecfaa630a2ef9a477f991a46a ]

A more sophisticated implementation could try to combine fragment checksums
when all fragments have CHECKSUM_COMPLETE and are split at even offsets.
For now, we just set ip_summed to CHECKSUM_NONE to avoid "hw csum failure"
warnings in the kernel log when fragmented frames are received. In
consequence, skb_pull_rcsum() can be replaced with skb_pull().

Note that in usual setups, packets don't reach batman-adv with
CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see
batadv's ethtype?), which is why the log messages do not occur on every
system using batman-adv. I could reproduce this issue by stacking
batman-adv on top of a VXLAN interface.

Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Tested-by: Maximilian Wilhelm <max@sdn.clinic>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/fragmentation.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -260,7 +260,8 @@ batadv_frag_merge_packets(struct hlist_h
 	/* Move the existing MAC header to just before the payload. (Override
 	 * the fragment header.)
 	 */
-	skb_pull_rcsum(skb_out, hdr_size);
+	skb_pull(skb_out, hdr_size);
+	skb_out->ip_summed = CHECKSUM_NONE;
 	memmove(skb_out->data - ETH_HLEN, skb_mac_header(skb_out), ETH_HLEN);
 	skb_set_mac_header(skb_out, -ETH_HLEN);
 	skb_reset_network_header(skb_out);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 076/185] netfilter: ebtables: convert BUG_ONs to WARN_ONs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (69 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 075/185] batman-adv: invalidate checksum on fragment reassembly Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 077/185] clocksource/drivers/fsl_ftm_timer: Fix error return checking Greg Kroah-Hartman
                   ` (104 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit fc6a5d0601c5ac1d02f283a46f60b87b2033e5ca ]

All of these conditions are not fatal and should have
been WARN_ONs from the get-go.

Convert them to WARN_ONs and bail out.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/netfilter/ebtables.c |   27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1612,7 +1612,8 @@ static int compat_match_to_user(struct e
 	int off = ebt_compat_match_offset(match, m->match_size);
 	compat_uint_t msize = m->match_size - off;
 
-	BUG_ON(off >= m->match_size);
+	if (WARN_ON(off >= m->match_size))
+		return -EINVAL;
 
 	if (copy_to_user(cm->u.name, match->name,
 	    strlen(match->name) + 1) || put_user(msize, &cm->match_size))
@@ -1639,7 +1640,8 @@ static int compat_target_to_user(struct
 	int off = xt_compat_target_offset(target);
 	compat_uint_t tsize = t->target_size - off;
 
-	BUG_ON(off >= t->target_size);
+	if (WARN_ON(off >= t->target_size))
+		return -EINVAL;
 
 	if (copy_to_user(cm->u.name, target->name,
 	    strlen(target->name) + 1) || put_user(tsize, &cm->match_size))
@@ -1867,7 +1869,8 @@ static int ebt_buf_add(struct ebt_entrie
 	if (state->buf_kern_start == NULL)
 		goto count_only;
 
-	BUG_ON(state->buf_kern_offset + sz > state->buf_kern_len);
+	if (WARN_ON(state->buf_kern_offset + sz > state->buf_kern_len))
+		return -EINVAL;
 
 	memcpy(state->buf_kern_start + state->buf_kern_offset, data, sz);
 
@@ -1880,7 +1883,8 @@ static int ebt_buf_add_pad(struct ebt_en
 {
 	char *b = state->buf_kern_start;
 
-	BUG_ON(b && state->buf_kern_offset > state->buf_kern_len);
+	if (WARN_ON(b && state->buf_kern_offset > state->buf_kern_len))
+		return -EINVAL;
 
 	if (b != NULL && sz > 0)
 		memset(b + state->buf_kern_offset, 0, sz);
@@ -1957,8 +1961,10 @@ static int compat_mtw_from_user(struct c
 	pad = XT_ALIGN(size_kern) - size_kern;
 
 	if (pad > 0 && dst) {
-		BUG_ON(state->buf_kern_len <= pad);
-		BUG_ON(state->buf_kern_offset - (match_size + off) + size_kern > state->buf_kern_len - pad);
+		if (WARN_ON(state->buf_kern_len <= pad))
+			return -EINVAL;
+		if (WARN_ON(state->buf_kern_offset - (match_size + off) + size_kern > state->buf_kern_len - pad))
+			return -EINVAL;
 		memset(dst + size_kern, 0, pad);
 	}
 	return off + match_size;
@@ -2009,7 +2015,8 @@ static int ebt_size_mwt(struct compat_eb
 		if (ret < 0)
 			return ret;
 
-		BUG_ON(ret < match32->match_size);
+		if (WARN_ON(ret < match32->match_size))
+			return -EINVAL;
 		growth += ret - match32->match_size;
 		growth += ebt_compat_entry_padsize();
 
@@ -2119,7 +2126,8 @@ static int size_entry_mwt(struct ebt_ent
 
 	startoff = state->buf_user_offset - startoff;
 
-	BUG_ON(*total < startoff);
+	if (WARN_ON(*total < startoff))
+		return -EINVAL;
 	*total -= startoff;
 	return 0;
 }
@@ -2247,7 +2255,8 @@ static int compat_do_replace(struct net
 	state.buf_kern_len = size64;
 
 	ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state);
-	BUG_ON(ret < 0);	/* parses same data again */
+	if (WARN_ON(ret < 0))
+		goto out_unlock;
 
 	vfree(entries_tmp);
 	tmp.entries_size = size64;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 077/185] clocksource/drivers/fsl_ftm_timer: Fix error return checking
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (70 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 076/185] netfilter: ebtables: convert BUG_ONs to WARN_ONs Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:01 ` [PATCH 3.18 078/185] r8152: fix tx packets accounting Greg Kroah-Hartman
                   ` (103 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Thomas Gleixner,
	Daniel Lezcano, kernel-janitors, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit f287eb9013ccf199cbfa4eabd80c36fedfc15a73 ]

The error checks on freq for a negative error return always fails because
freq is unsigned and can never be negative. Fix this by making freq a
signed long.

Detected with Coccinelle:
drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0

Fixes: 2529c3a33079 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226113614.3092-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clocksource/fsl_ftm_timer.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clocksource/fsl_ftm_timer.c
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -282,7 +282,7 @@ static int __init __ftm_clk_init(struct
 
 static unsigned long __init ftm_clk_init(struct device_node *np)
 {
-	unsigned long freq;
+	long freq;
 
 	freq = __ftm_clk_init(np, "ftm-evt-counter-en", "ftm-evt");
 	if (freq <= 0)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 078/185] r8152: fix tx packets accounting
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (71 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 077/185] clocksource/drivers/fsl_ftm_timer: Fix error return checking Greg Kroah-Hartman
@ 2018-05-28 10:01 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 079/185] bcache: fix kcrashes with fio in RAID5 backend dev Greg Kroah-Hartman
                   ` (102 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:01 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Dumazet, David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 4c27bf3c5b7434ccb9ab962301da661c26b467a4 ]

r8152 driver handles TSO packets (limited to ~16KB) quite well,
but pretends each TSO logical packet is a single packet on the wire.

There is also some error since headers are accounted once, but
error rate is small enough that we do not care.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/r8152.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1590,7 +1590,7 @@ static int r8152_tx_agg_fill(struct r815
 
 		tx_data += len;
 		agg->skb_len += len;
-		agg->skb_num++;
+		agg->skb_num += skb_shinfo(skb)->gso_segs ?: 1;
 
 		dev_kfree_skb_any(skb);
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 079/185] bcache: fix kcrashes with fio in RAID5 backend dev
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (72 preceding siblings ...)
  2018-05-28 10:01 ` [PATCH 3.18 078/185] r8152: fix tx packets accounting Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 080/185] sit: fix IFLA_MTU ignored on NEWLINK Greg Kroah-Hartman
                   ` (101 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matthias Ferdinand, Tang Junhui,
	Michael Lyle, Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tang Junhui <tang.junhui@zte.com.cn>

[ Upstream commit 60eb34ec5526e264c2bbaea4f7512d714d791caf ]

Kernel crashed when run fio in a RAID5 backend bcache device, the call
trace is bellow:
[  440.012034] kernel BUG at block/blk-ioc.c:146!
[  440.012696] invalid opcode: 0000 [#1] SMP NOPTI
[  440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8
[  440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16
/2015
[  440.028615] RIP: 0010:put_io_context+0x8b/0x90
[  440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246
[  440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000
0f4240
[  440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882
94fca0
[  440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8
0c1700
[  440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000
01000
[  440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11
bd1e0
[  440.035239] FS:  0000000000000000(0000) GS:ffff949cba280000(0000) knlGS:
0000000000000000
[  440.060190] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001
606e0
[  440.110498] Call Trace:
[  440.135443]  bio_disassociate_task+0x1b/0x60
[  440.160355]  bio_free+0x1b/0x60
[  440.184666]  bio_put+0x23/0x30
[  440.208272]  search_free+0x23/0x40 [bcache]
[  440.231448]  cached_dev_write_complete+0x31/0x70 [bcache]
[  440.254468]  closure_put+0xb6/0xd0 [bcache]
[  440.277087]  request_endio+0x30/0x40 [bcache]
[  440.298703]  bio_endio+0xa1/0x120
[  440.319644]  handle_stripe+0x418/0x2270 [raid456]
[  440.340614]  ? load_balance+0x17b/0x9c0
[  440.360506]  handle_active_stripes.isra.58+0x387/0x5a0 [raid456]
[  440.380675]  ? __release_stripe+0x15/0x20 [raid456]
[  440.400132]  raid5d+0x3ed/0x5d0 [raid456]
[  440.419193]  ? schedule+0x36/0x80
[  440.437932]  ? schedule_timeout+0x1d2/0x2f0
[  440.456136]  md_thread+0x122/0x150
[  440.473687]  ? wait_woken+0x80/0x80
[  440.491411]  kthread+0x102/0x140
[  440.508636]  ? find_pers+0x70/0x70
[  440.524927]  ? kthread_associate_blkcg+0xa0/0xa0
[  440.541791]  ret_from_fork+0x35/0x40
[  440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2
48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b
0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41
[  440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8
[  440.628575] ---[ end trace a1fd79d85643a73e ]--

All the crash issue happened when a bypass IO coming, in such scenario
s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the
s->orig_bio by calling bio_complete(), and after that, s->iop.bio became
invalid, then kernel would crash when calling bio_put(). Maybe its upper
layer's faulty, since bio should not be freed before we calling bio_put(),
but we'd better calling bio_put() first before calling bio_complete() to
notify upper layer ending this bio.

This patch moves bio_complete() under bio_put() to avoid kernel crash.

[mlyle: fixed commit subject for character limits]

Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Tested-by: Matthias Ferdinand <bcache@mfedv.net>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/bcache/request.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/md/bcache/request.c
+++ b/drivers/md/bcache/request.c
@@ -631,11 +631,11 @@ static void do_bio_hook(struct search *s
 static void search_free(struct closure *cl)
 {
 	struct search *s = container_of(cl, struct search, cl);
-	bio_complete(s);
 
 	if (s->iop.bio)
 		bio_put(s->iop.bio);
 
+	bio_complete(s);
 	closure_debug_destroy(cl);
 	mempool_free(s, s->d->c->search);
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 080/185] sit: fix IFLA_MTU ignored on NEWLINK
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (73 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 079/185] bcache: fix kcrashes with fio in RAID5 backend dev Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 081/185] net/tcp/illinois: replace broken algorithm reference link Greg Kroah-Hartman
                   ` (100 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jianlin Shi, Xin Long,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 2b3957c34b6d7f03544b12ebbf875eee430745db ]

Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len
correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same
mtu fix is also needed for sit.

Note that dev->hard_header_len setting for sit works fine, no need to
fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu
to set mtu.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/sit.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1572,6 +1572,13 @@ static int ipip6_newlink(struct net *src
 	if (err < 0)
 		return err;
 
+	if (tb[IFLA_MTU]) {
+		u32 mtu = nla_get_u32(tb[IFLA_MTU]);
+
+		if (mtu >= IPV6_MIN_MTU && mtu <= 0xFFF8 - dev->hard_header_len)
+			dev->mtu = mtu;
+	}
+
 #ifdef CONFIG_IPV6_SIT_6RD
 	if (ipip6_netlink_6rd_parms(data, &ip6rd))
 		err = ipip6_tunnel_update_6rd(nt, &ip6rd);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 081/185] net/tcp/illinois: replace broken algorithm reference link
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (74 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 080/185] sit: fix IFLA_MTU ignored on NEWLINK Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 083/185] Btrfs: send, fix issuing write op when processing hole in no data mode Greg Kroah-Hartman
                   ` (99 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Joey Pabalinas, David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joey Pabalinas <joeypabalinas@gmail.com>

[ Upstream commit ecc832758a654e375924ebf06a4ac971acb5ce60 ]

The link to the pdf containing the algorithm description is now a
dead link; it seems http://www.ifp.illinois.edu/~srikant/ has been
moved to https://sites.google.com/a/illinois.edu/srikant/ and none of
the original papers can be found there...

I have replaced it with the only working copy I was able to find.

n.b. there is also a copy available at:

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.296.6350&rep=rep1&type=pdf

However, this seems to only be a *cached* version, so I am unsure
exactly how reliable that link can be expected to remain over time
and have decided against using that one.

Signed-off-by: Joey Pabalinas <joeypabalinas@gmail.com>

 net/ipv4/tcp_illinois.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_illinois.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -6,7 +6,7 @@
  * The algorithm is described in:
  * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
  *  for High-Speed Networks"
- * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
+ * http://tamerbasar.csl.illinois.edu/LiuBasarSrikantPerfEvalArtJun2008.pdf
  *
  * Implemented from description in paper and ns-2 simulation.
  * Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org>

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 083/185] Btrfs: send, fix issuing write op when processing hole in no data mode
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (75 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 081/185] net/tcp/illinois: replace broken algorithm reference link Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 084/185] watchdog: f71808e_wdt: Fix magic close handling Greg Kroah-Hartman
                   ` (98 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit d4dfc0f4d39475ccbbac947880b5464a74c30b99 ]

When doing an incremental send of a filesystem with the no-holes feature
enabled, we end up issuing a write operation when using the no data mode
send flag, instead of issuing an update extent operation. Fix this by
issuing the update extent operation instead.

Trivial reproducer:

  $ mkfs.btrfs -f -O no-holes /dev/sdc
  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdc /mnt/sdc
  $ mount /dev/sdd /mnt/sdd

  $ xfs_io -f -c "pwrite -S 0xab 0 32K" /mnt/sdc/foobar
  $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap1

  $ xfs_io -c "fpunch 8K 8K" /mnt/sdc/foobar
  $ btrfs subvolume snapshot -r /mnt/sdc /mnt/sdc/snap2

  $ btrfs send /mnt/sdc/snap1 | btrfs receive /mnt/sdd
  $ btrfs send --no-data -p /mnt/sdc/snap1 /mnt/sdc/snap2 \
       | btrfs receive -vv /mnt/sdd

Before this change the output of the second receive command is:

  receiving snapshot snap2 uuid=f6922049-8c22-e544-9ff9-fc6755918447...
  utimes
  write foobar, offset 8192, len 8192
  utimes foobar
  BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=f6922049-8c22-e544-9ff9-...

After this change it is:

  receiving snapshot snap2 uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...
  utimes
  update_extent foobar: offset=8192, len=8192
  utimes foobar
  BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=564d36a3-ebc8-7343-aec9-bf6fda278e64...

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/send.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -4485,6 +4485,9 @@ static int send_hole(struct send_ctx *sc
 	u64 len;
 	int ret = 0;
 
+	if (sctx->flags & BTRFS_SEND_FLAG_NO_FILE_DATA)
+		return send_update_extent(sctx, offset, end - offset);
+
 	p = fs_path_alloc();
 	if (!p)
 		return -ENOMEM;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 084/185] watchdog: f71808e_wdt: Fix magic close handling
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (76 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 083/185] Btrfs: send, fix issuing write op when processing hole in no data mode Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 085/185] e1000e: Fix check_for_link return value with autoneg off Greg Kroah-Hartman
                   ` (97 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Igor Pylypiv, Guenter Roeck,
	Wim Van Sebroeck, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Igor Pylypiv <igor.pylypiv@gmail.com>

[ Upstream commit 7bd3e7b743956afbec30fb525bc3c5e22e3d475c ]

Watchdog close is "expected" when any byte is 'V' not just the last one.
Writing "V" to the device fails because the last byte is the end of string.

$ echo V > /dev/watchdog
f71808e_wdt: Unexpected close, not stopping watchdog!

Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/f71808e_wdt.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/watchdog/f71808e_wdt.c
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -520,7 +520,8 @@ static ssize_t watchdog_write(struct fil
 				char c;
 				if (get_user(c, buf + i))
 					return -EFAULT;
-				expect_close = (c == 'V');
+				if (c == 'V')
+					expect_close = true;
 			}
 
 			/* Properly order writes across fork()ed processes */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 085/185] e1000e: Fix check_for_link return value with autoneg off
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (77 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 084/185] watchdog: f71808e_wdt: Fix magic close handling Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 086/185] e1000e: allocate ring descriptors with dma_zalloc_coherent Greg Kroah-Hartman
                   ` (96 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Benjamin Poirier, Sasha Neftin,
	Aaron Brown, Jeff Kirsher, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Poirier <bpoirier@suse.com>

[ Upstream commit 4e7dc08e57c95673d2edaba8983c3de4dd1f65f5 ]

When autoneg is off, the .check_for_link callback functions clear the
get_link_status flag and systematically return a "pseudo-error". This means
that the link is not detected as up until the next execution of the
e1000_watchdog_task() 2 seconds later.

Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c |    2 +-
 drivers/net/ethernet/intel/e1000e/mac.c     |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1441,7 +1441,7 @@ static s32 e1000_check_for_copper_link_i
 	 * we have already determined whether we have link or not.
 	 */
 	if (!mac->autoneg)
-		return -E1000_ERR_CONFIG;
+		return 1;
 
 	/* Auto-Neg is enabled.  Auto Speed Detection takes care
 	 * of MAC speed/duplex configuration.  So we only need to
--- a/drivers/net/ethernet/intel/e1000e/mac.c
+++ b/drivers/net/ethernet/intel/e1000e/mac.c
@@ -450,7 +450,7 @@ s32 e1000e_check_for_copper_link(struct
 	 * we have already determined whether we have link or not.
 	 */
 	if (!mac->autoneg)
-		return -E1000_ERR_CONFIG;
+		return 1;
 
 	/* Auto-Neg is enabled.  Auto Speed Detection takes care
 	 * of MAC speed/duplex configuration.  So we only need to

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 086/185] e1000e: allocate ring descriptors with dma_zalloc_coherent
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (78 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 085/185] e1000e: Fix check_for_link return value with autoneg off Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 087/185] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers Greg Kroah-Hartman
                   ` (95 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Pierre-Yves Kerbrat, Marius Gligor,
	Aaron Brown, Alexander Duyck, Jeff Kirsher, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Yves Kerbrat <pkerbrat@kalray.eu>

[ Upstream commit aea3fca005fb45f80869f2e8d56fd4e64c1d1fdb ]

Descriptor rings were not initialized at zero when allocated
When area contained garbage data, it caused skb_over_panic in
e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set)

This patch makes use of dma_zalloc_coherent to make sure the
ring is memset at 0 to prevent the area from containing garbage.

Following is the signature of the panic:
IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0
IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()!
IODDR0@0.0: Kernel panic - not syncing: BUG!
IODDR0@0.0:
IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0)
IODDR0@0.0: SP = <815a1c0c>
IODDR0@0.0: Stack:      00000001
IODDR0@0.0: b2d89800 815e33ac
IODDR0@0.0: ea73c040 00000001
IODDR0@0.0: 60040003 0000fa0a
IODDR0@0.0: 00000002
IODDR0@0.0:
IODDR0@0.0: 804540c0 815a1c70
IODDR0@0.0: b2744000 602ac070
IODDR0@0.0: 815a1c44 b2d89800
IODDR0@0.0: 8173cc00 815a1c08
IODDR0@0.0:
IODDR0@0.0:     00000006
IODDR0@0.0: 815a1b50 00000000
IODDR0@0.0: 80079434 00000001
IODDR0@0.0: ab46df40 b2744000
IODDR0@0.0: b2d89800
IODDR0@0.0:
IODDR0@0.0: 0000fa0a 8045745c
IODDR0@0.0: 815a1c88 0000fa0a
IODDR0@0.0: 80407b20 b2789f80
IODDR0@0.0: 00000005 80407b20
IODDR0@0.0:
IODDR0@0.0:
IODDR0@0.0: Call Trace:
IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8
IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0
IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0
IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8
IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8
IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8
IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8
IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8
IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288
IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8
IODDR0@0.0:   ...
IODDR0@0.0: Maximum depth to print reached. Use kstack=<maximum_depth_to_print> To specify a custom value (where 0 means to display the full backtrace)
IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG!

Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2330,8 +2330,8 @@ static int e1000_alloc_ring_dma(struct e
 {
 	struct pci_dev *pdev = adapter->pdev;
 
-	ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
-					GFP_KERNEL);
+	ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma,
+					 GFP_KERNEL);
 	if (!ring->desc)
 		return -ENOMEM;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 087/185] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (79 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 086/185] e1000e: allocate ring descriptors with dma_zalloc_coherent Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 088/185] scsi: sd: Keep disk read-only when re-reading partition Greg Kroah-Hartman
                   ` (94 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Merlijn Wajer, Tony Lindgren,
	Bin Liu, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Merlijn Wajer <merlijn@wizzup.org>

[ Upstream commit df6b074dbe248d8c43a82131e8fd429e401841a5 ]

Without pm_runtime_{get,put}_sync calls in place, reading
vbus status via /sys causes the following error:

Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060
pgd = b333e822
[fa0ab060] *pgd=48011452(bad)

[<c05261b0>] (musb_default_readb) from [<c0525bd0>] (musb_vbus_show+0x58/0xe4)
[<c0525bd0>] (musb_vbus_show) from [<c04c0148>] (dev_attr_show+0x20/0x44)
[<c04c0148>] (dev_attr_show) from [<c0259f74>] (sysfs_kf_seq_show+0x80/0xdc)
[<c0259f74>] (sysfs_kf_seq_show) from [<c0210bac>] (seq_read+0x250/0x448)
[<c0210bac>] (seq_read) from [<c01edb40>] (__vfs_read+0x1c/0x118)
[<c01edb40>] (__vfs_read) from [<c01edccc>] (vfs_read+0x90/0x144)
[<c01edccc>] (vfs_read) from [<c01ee1d0>] (SyS_read+0x3c/0x74)
[<c01ee1d0>] (SyS_read) from [<c0106fe0>] (ret_fast_syscall+0x0/0x54)

Solution was suggested by Tony Lindgren <tony@atomide.com>.

Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1700,6 +1700,7 @@ musb_vbus_show(struct device *dev, struc
 	unsigned long	val;
 	int		vbus;
 
+	pm_runtime_get_sync(dev);
 	spin_lock_irqsave(&musb->lock, flags);
 	val = musb->a_wait_bcon;
 	/* FIXME get_vbus_status() is normally #defined as false...
@@ -1707,6 +1708,7 @@ musb_vbus_show(struct device *dev, struc
 	 */
 	vbus = musb_platform_get_vbus_status(musb);
 	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_put_sync(dev);
 
 	return sprintf(buf, "Vbus %s, timeout %lu msec\n",
 			vbus ? "on" : "off", val);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 088/185] scsi: sd: Keep disk read-only when re-reading partition
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (80 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 087/185] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 089/185] fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper() Greg Kroah-Hartman
                   ` (93 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Li Ning, Jeremy Cline,
	Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Cline <jeremy@jcline.org>

[ Upstream commit 20bd1d026aacc5399464f8328f305985c493cde3 ]

If the read-only flag is true on a SCSI disk, re-reading the partition
table sets the flag back to false.

To observe this bug, you can run:

1. blockdev --setro /dev/sda
2. blockdev --rereadpt /dev/sda
3. blockdev --getro /dev/sda

This commit reads the disk's old state and combines it with the device
disk-reported state rather than unconditionally marking it as RW.

Reported-by: Li Ning <lining916740672@icloud.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2318,6 +2318,7 @@ sd_read_write_protect_flag(struct scsi_d
 	int res;
 	struct scsi_device *sdp = sdkp->device;
 	struct scsi_mode_data data;
+	int disk_ro = get_disk_ro(sdkp->disk);
 	int old_wp = sdkp->write_prot;
 
 	set_disk_ro(sdkp->disk, 0);
@@ -2358,7 +2359,7 @@ sd_read_write_protect_flag(struct scsi_d
 			  "Test WP failed, assume Write Enabled\n");
 	} else {
 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
-		set_disk_ro(sdkp->disk, sdkp->write_prot);
+		set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro);
 		if (sdkp->first_scan || old_wp != sdkp->write_prot) {
 			sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
 				  sdkp->write_prot ? "on" : "off");

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 089/185] fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper().
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (81 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 088/185] scsi: sd: Keep disk read-only when re-reading partition Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 090/185] xen: xenbus: use put_device() instead of kfree() Greg Kroah-Hartman
                   ` (92 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Peter Malone, Mathieu Malaterre,
	Bartlomiej Zolnierkiewicz, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Malone <peter.malone@gmail.com>

[ Upstream commit 250c6c49e3b68756b14983c076183568636e2bde ]

Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in
sbusfb_ioctl_helper().

'index' is defined as an int in sbusfb_ioctl_helper().
We retrieve this from the user:
if (get_user(index, &c->index) ||
    __get_user(count, &c->count) ||
    __get_user(ured, &c->red) ||
    __get_user(ugreen, &c->green) ||
    __get_user(ublue, &c->blue))
       return -EFAULT;

and then we use 'index' in the following way:
red = cmap->red[index + i] >> 8;
green = cmap->green[index + i] >> 8;
blue = cmap->blue[index + i] >> 8;

This is a classic information leak vulnerability. 'index' should be
an unsigned int, given its usage above.

This patch is straight-forward; it changes 'index' to unsigned int
in two switch-cases: FBIOGETCMAP_SPARC && FBIOPUTCMAP_SPARC.

This patch fixes CVE-2018-6412.

Signed-off-by: Peter Malone <peter.malone@gmail.com>
Acked-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/sbuslib.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/video/fbdev/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
@@ -121,7 +121,7 @@ int sbusfb_ioctl_helper(unsigned long cm
 		unsigned char __user *ured;
 		unsigned char __user *ugreen;
 		unsigned char __user *ublue;
-		int index, count, i;
+		unsigned int index, count, i;
 
 		if (get_user(index, &c->index) ||
 		    __get_user(count, &c->count) ||
@@ -160,7 +160,7 @@ int sbusfb_ioctl_helper(unsigned long cm
 		unsigned char __user *ugreen;
 		unsigned char __user *ublue;
 		struct fb_cmap *cmap = &info->cmap;
-		int index, count, i;
+		unsigned int index, count, i;
 		u8 red, green, blue;
 
 		if (get_user(index, &c->index) ||

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 090/185] xen: xenbus: use put_device() instead of kfree()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (82 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 089/185] fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper() Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 091/185] USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM Greg Kroah-Hartman
                   ` (91 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arvind Yadav, Juergen Gross, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arvind Yadav <arvind.yadav.cs@gmail.com>

[ Upstream commit 351b2bccede1cb673ec7957b35ea997ea24c8884 ]

Never directly free @dev after calling device_register(), even
if it returned an error! Always use put_device() to give up the
reference initialized.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xenbus/xenbus_probe.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -470,8 +470,11 @@ int xenbus_probe_node(struct xen_bus_typ
 
 	/* Register with generic device framework. */
 	err = device_register(&xendev->dev);
-	if (err)
+	if (err) {
+		put_device(&xendev->dev);
+		xendev = NULL;
 		goto fail;
+	}
 
 	return 0;
 fail:

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 091/185] USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (83 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 090/185] xen: xenbus: use put_device() instead of kfree() Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 092/185] netfilter: ebtables: fix erroneous reject of last rule Greg Kroah-Hartman
                   ` (90 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Fredrik Noring, Alan Stern, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fredrik Noring <noring@nocrew.org>

[ Upstream commit d6c931ea32dc08ac2665bb5f009f9c40ad1bbdb3 ]

Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".

The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8
Modules linked in:
CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014
Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031
        805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000
        00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420
        805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538
        00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000
        ...
Call Trace:
[<578af360>] show_stack+0x74/0x104
[<2f3702c6>] __warn+0x118/0x120
[<ae93fc9e>] warn_slowpath_null+0x44/0x58
[<a891a517>] hcd_alloc_coherent+0x4c/0xc8
[<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534
[<110bc94c>] usb_hcd_submit_urb+0x82c/0x834
[<02eb5baf>] usb_sg_wait+0x14c/0x1a0
[<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124
[<87a5c34c>] usb_stor_bulk_srb+0x40/0x60
[<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c
[<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500
[<004754f4>] usb_stor_control_thread+0x258/0x28c
[<22edf42e>] kthread+0x134/0x13c
[<a419ffd0>] ret_from_kernel_thread+0x14/0x1c
---[ end trace bcdb825805eefdcc ]---

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>


Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ohci-hcd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -443,7 +443,8 @@ static int ohci_init (struct ohci_hcd *o
 	struct usb_hcd *hcd = ohci_to_hcd(ohci);
 
 	/* Accept arbitrarily long scatter-gather lists */
-	hcd->self.sg_tablesize = ~0;
+	if (!(hcd->driver->flags & HCD_LOCAL_MEM))
+		hcd->self.sg_tablesize = ~0;
 
 	if (distrust_firmware)
 		ohci->flags |= OHCI_QUIRK_HUB_POWER;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 092/185] netfilter: ebtables: fix erroneous reject of last rule
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (84 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 091/185] USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM Greg Kroah-Hartman
                   ` (89 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 932909d9b28d27e807ff8eecb68c7748f6701628 ]

The last rule in the blob has next_entry offset that is same as total size.
This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel.

Fixes: b71812168571fa ("netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/netfilter/ebtables.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -2086,8 +2086,12 @@ static int size_entry_mwt(struct ebt_ent
 	 * offsets are relative to beginning of struct ebt_entry (i.e., 0).
 	 */
 	for (i = 0; i < 4 ; ++i) {
-		if (offsets[i] >= *total)
+		if (offsets[i] > *total)
 			return -EINVAL;
+
+		if (i < 3 && offsets[i] == *total)
+			return -EINVAL;
+
 		if (i == 0)
 			continue;
 		if (offsets[i-1] > offsets[i])

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (85 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 092/185] netfilter: ebtables: fix erroneous reject of last rule Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-29 14:34   ` Rob Herring
  2018-05-28 10:02 ` [PATCH 3.18 094/185] net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off Greg Kroah-Hartman
                   ` (88 subsequent siblings)
  175 siblings, 1 reply; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rob Herring, Alvaro Gamez Machado,
	Michal Simek, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Herring <robh@kernel.org>

[ Upstream commit 101646a24a2f9cdb61d7732459fbf068a7bbb542 ]

Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.

Similar change was already done by others architectures
"ARM: mm: Remove bootmem code and switch to NO_BOOTMEM"
(sha1: 84f452b1e8fc73ac0e31254c66e3e2260ce5263d)
or
"openrisc: Consolidate setup to use memblock instead of bootmem"
(sha1: 266c7fad157265bb54d17db1c9545f2aaa488643)
or
"parisc: Drop bootmem and switch to memblock"
(sha1: 4fe9e1d957e45ad8eba9885ee860a0e93d13a7c7)
or
"powerpc: Remove bootmem allocator"
(sha1: 10239733ee8617bac3f1c1769af43a88ed979324)
or
"s390/mm: Convert bootmem to memblock"
(sha1: 50be634507284eea38df78154d22615d21200b42)
or
"sparc64: Convert over to NO_BOOTMEM."
(sha1: 625d693e9784f988371e69c2b41a2172c0be6c11)
or
"xtensa: drop sysmem and switch to memblock"
(sha1: 0e46c1115f5816949220d62dd3ff04aa68e7ac6b)

Issue was introduced by:
"of/fdt: use memblock_virt_alloc for early alloc"
(sha1: 0fa1c579349fdd90173381712ad78aa99c09d38b)

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/microblaze/Kconfig   |    1 
 arch/microblaze/mm/init.c |   56 ++++------------------------------------------
 2 files changed, 7 insertions(+), 50 deletions(-)

--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -23,6 +23,7 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select NO_BOOTMEM
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -32,9 +32,6 @@ int mem_init_done;
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
-
-#else
-static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
 char *klimit = _end;
@@ -117,7 +114,6 @@ static void __init paging_init(void)
 
 void __init setup_memory(void)
 {
-	unsigned long map_size;
 	struct memblock_region *reg;
 
 #ifndef CONFIG_MMU
@@ -174,17 +170,6 @@ void __init setup_memory(void)
 	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
 	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
 
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	map_size = init_bootmem_node(NODE_DATA(0),
-		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
-	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
-
 	/* Add active regions with valid PFNs */
 	for_each_memblock(memory, reg) {
 		unsigned long start_pfn, end_pfn;
@@ -196,32 +181,9 @@ void __init setup_memory(void)
 				  &memblock.memory, 0);
 	}
 
-	/* free bootmem is whole main memory */
-	free_bootmem_with_active_regions(0, max_low_pfn);
-
-	/* reserve allocate blocks */
-	for_each_memblock(reserved, reg) {
-		unsigned long top = reg->base + reg->size - 1;
-
-		pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n",
-			 (u32) reg->base, (u32) reg->size, top,
-						memory_start + lowmem_size - 1);
-
-		if (top <= (memory_start + lowmem_size - 1)) {
-			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
-		} else if (reg->base < (memory_start + lowmem_size - 1)) {
-			unsigned long trunc_size = memory_start + lowmem_size -
-								reg->base;
-			reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT);
-		}
-	}
-
 	/* XXX need to clip this if using highmem? */
 	sparse_memory_present_with_active_regions(0);
 
-#ifdef CONFIG_MMU
-	init_bootmem_done = 1;
-#endif
 	paging_init();
 }
 
@@ -398,18 +360,12 @@ asmlinkage void __init mmu_init(void)
 /* This is only called until mem_init is done. */
 void __init *early_get_page(void)
 {
-	void *p;
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		/*
-		 * Mem start + kernel_tlb -> here is limit
-		 * because of mem mapping from head.S
-		 */
-		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
-					memory_start + kernel_tlb));
-	}
-	return p;
+	/*
+	 * Mem start + kernel_tlb -> here is limit
+	 * because of mem mapping from head.S
+	 */
+	return __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
+				memory_start + kernel_tlb));
 }
 
 #endif /* CONFIG_MMU */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 094/185] net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (86 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 095/185] batman-adv: fix header size check in batadv_dbg_arp() Greg Kroah-Hartman
                   ` (87 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Brandon Carpenter, Toshiaki Makita,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>

[ Upstream commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61 ]

When we have a bridge with vlan_filtering on and a vlan device on top of
it, packets would be corrupted in skb_vlan_untag() called from
br_dev_xmit().

The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(),
which makes use of skb->mac_len. In this function mac_len is meant for
handling rx path with vlan devices with reorder_header disabled, but in
tx path mac_len is typically 0 and cannot be used, which is the problem
in this case.

The current code even does not properly handle rx path (skb_vlan_untag()
called from __netif_receive_skb_core()) with reorder_header off actually.

In rx path single tag case, it works as follows:

- Before skb_reorder_vlan_header()

 mac_header                                data
   v                                        v
   +-------------------+-------------+------+----
   |        ETH        |    VLAN     | ETH  |
   |       ADDRS       | TPID | TCI  | TYPE |
   +-------------------+-------------+------+----
   <-------- mac_len --------->
                       <------------->
                        to be removed

- After skb_reorder_vlan_header()

            mac_header                     data
                 v                          v
                 +-------------------+------+----
                 |        ETH        | ETH  |
                 |       ADDRS       | TYPE |
                 +-------------------+------+----
                 <-------- mac_len --------->

This is ok, but in rx double tag case, it corrupts packets:

- Before skb_reorder_vlan_header()

 mac_header                                              data
   v                                                      v
   +-------------------+-------------+-------------+------+----
   |        ETH        |    VLAN     |    VLAN     | ETH  |
   |       ADDRS       | TPID | TCI  | TPID | TCI  | TYPE |
   +-------------------+-------------+-------------+------+----
   <--------------- mac_len ---------------->
                                     <------------->
                                    should be removed
                       <--------------------------->
                         actually will be removed

- After skb_reorder_vlan_header()

            mac_header                                   data
                 v                                        v
                               +-------------------+------+----
                               |        ETH        | ETH  |
                               |       ADDRS       | TYPE |
                               +-------------------+------+----
                 <--------------- mac_len ---------------->

So, two of vlan tags are both removed while only inner one should be
removed and mac_header (and mac_len) is broken.

skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2),
so use skb->data and skb->mac_header to calculate the right offset.

Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/if_ether.h |    1 +
 net/core/skbuff.c             |    7 +++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -29,6 +29,7 @@
  */
 
 #define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_TLEN	2		/* Octets in ethernet type field */
 #define ETH_HLEN	14		/* Total octets in header.	 */
 #define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
 #define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4129,13 +4129,16 @@ EXPORT_SYMBOL_GPL(skb_gso_transport_segl
 
 static struct sk_buff *skb_reorder_vlan_header(struct sk_buff *skb)
 {
+	int mac_len;
+
 	if (skb_cow(skb, skb_headroom(skb)) < 0) {
 		kfree_skb(skb);
 		return NULL;
 	}
 
-	memmove(skb->data - ETH_HLEN, skb->data - skb->mac_len - VLAN_HLEN,
-		2 * ETH_ALEN);
+	mac_len = skb->data - skb_mac_header(skb);
+	memmove(skb_mac_header(skb) + VLAN_HLEN, skb_mac_header(skb),
+		mac_len - VLAN_HLEN - ETH_TLEN);
 	skb->mac_header += VLAN_HLEN;
 	return skb;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 095/185] batman-adv: fix header size check in batadv_dbg_arp()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (87 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 094/185] net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 096/185] vti4: Dont count header length twice on tunnel setup Greg Kroah-Hartman
                   ` (86 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matthias Schiffer, Sven Eckelmann,
	Simon Wunderlich, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schiffer <mschiffer@universe-factory.net>

[ Upstream commit 6f27d2c2a8c236d296201c19abb8533ec20d212b ]

Checking for 0 is insufficient: when an SKB without a batadv header, but
with a VLAN header is received, hdr_size will be 4, making the following
code interpret the Ethernet header as a batadv header.

Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/batman-adv/distributed-arp-table.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/batman-adv/distributed-arp-table.c
+++ b/net/batman-adv/distributed-arp-table.c
@@ -343,7 +343,7 @@ static void batadv_dbg_arp(struct batadv
 		   batadv_arp_hw_src(skb, hdr_size), &ip_src,
 		   batadv_arp_hw_dst(skb, hdr_size), &ip_dst);
 
-	if (hdr_size == 0)
+	if (hdr_size < sizeof(struct batadv_unicast_packet))
 		return;
 
 	unicast_4addr_packet = (struct batadv_unicast_4addr_packet *)skb->data;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 096/185] vti4: Dont count header length twice on tunnel setup
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (88 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 095/185] batman-adv: fix header size check in batadv_dbg_arp() Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 097/185] vti4: Dont override MTU passed on link creation via IFLA_MTU Greg Kroah-Hartman
                   ` (85 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefano Brivio, Sabrina Dubroca,
	Steffen Klassert, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit dd1df24737727e119c263acf1be2a92763938297 ]

This re-introduces the effect of commit a32452366b72 ("vti4:
Don't count header length twice.") which was accidentally
reverted by merge commit f895f0cfbb77 ("Merge branch 'master' of
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec").

The commit message from Steffen Klassert said:

    We currently count the size of LL_MAX_HEADER and struct iphdr
    twice for vti4 devices, this leads to a wrong device mtu.
    The size of LL_MAX_HEADER and struct iphdr is already counted in
    ip_tunnel_bind_dev(), so don't do it again in vti_tunnel_init().

And this is still the case now: ip_tunnel_bind_dev() already
accounts for the header length of the link layer (not
necessarily LL_MAX_HEADER, if the output device is found), plus
one IP header.

For example, with a vti device on top of veth, with MTU of 1500,
the existing implementation would set the initial vti MTU to
1332, accounting once for LL_MAX_HEADER (128, included in
hard_header_len by vti) and twice for the same IP header (once
from hard_header_len, once from ip_tunnel_bind_dev()).

It should instead be 1480, because ip_tunnel_bind_dev() is able
to figure out that the output device is veth, so no additional
link layer header is attached, and will properly count one
single IP header.

The existing issue had the side effect of avoiding PMTUD for
most xfrm policies, by arbitrarily lowering the initial MTU.
However, the only way to get a consistent PMTU value is to let
the xfrm PMTU discovery do its course, and commit d6af1a31cc72
("vti: Add pmtu handling to vti_xmit.") now takes care of local
delivery cases where the application ignores local socket
notifications.

Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code")
Fixes: f895f0cfbb77 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_vti.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -365,7 +365,6 @@ static int vti_tunnel_init(struct net_de
 	memcpy(dev->dev_addr, &iph->saddr, 4);
 	memcpy(dev->broadcast, &iph->daddr, 4);
 
-	dev->hard_header_len	= LL_MAX_HEADER + sizeof(struct iphdr);
 	dev->mtu		= ETH_DATA_LEN;
 	dev->flags		= IFF_NOARP;
 	dev->iflink		= 0;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 097/185] vti4: Dont override MTU passed on link creation via IFLA_MTU
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (89 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 096/185] vti4: Dont count header length twice on tunnel setup Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 098/185] mm/mempolicy.c: avoid use uninitialized preferred_node Greg Kroah-Hartman
                   ` (84 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefano Brivio, Sabrina Dubroca,
	Steffen Klassert, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 03080e5ec72740c1a62e6730f2a5f3f114f11b19 ]

Don't hardcode a MTU value on vti tunnel initialization,
ip_tunnel_newlink() is able to deal with this already. See also
commit ffc2b6ee4174 ("ip_gre: fix IFLA_MTU ignored on NEWLINK").

Fixes: 1181412c1a67 ("net/ipv4: VTI support new module for ip_vti.")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_vti.c |    1 -
 1 file changed, 1 deletion(-)

--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -365,7 +365,6 @@ static int vti_tunnel_init(struct net_de
 	memcpy(dev->dev_addr, &iph->saddr, 4);
 	memcpy(dev->broadcast, &iph->daddr, 4);
 
-	dev->mtu		= ETH_DATA_LEN;
 	dev->flags		= IFF_NOARP;
 	dev->iflink		= 0;
 	dev->addr_len		= 4;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 098/185] mm/mempolicy.c: avoid use uninitialized preferred_node
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (90 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 097/185] vti4: Dont override MTU passed on link creation via IFLA_MTU Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 099/185] selftests: ftrace: Add probe event argument syntax testcase Greg Kroah-Hartman
                   ` (83 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yisheng Xie, Alexander Potapenko,
	Andrew Morton, Dmitriy Vyukov, Vlastimil Babka, Michal Hocko,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <xieyisheng1@huawei.com>

[ Upstream commit 8970a63e965b43288c4f5f40efbc2bbf80de7f16 ]

Alexander reported a use of uninitialized memory in __mpol_equal(),
which is caused by incorrect use of preferred_node.

When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses
numa_node_id() instead of preferred_node, however, __mpol_equal() uses
preferred_node without checking whether it is MPOL_F_LOCAL or not.

[akpm@linux-foundation.org: slight comment tweak]
Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com
Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/mempolicy.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2169,6 +2169,9 @@ bool __mpol_equal(struct mempolicy *a, s
 	case MPOL_INTERLEAVE:
 		return !!nodes_equal(a->v.nodes, b->v.nodes);
 	case MPOL_PREFERRED:
+		/* a's ->flags is the same as b's */
+		if (a->flags & MPOL_F_LOCAL)
+			return true;
 		return a->v.preferred_node == b->v.preferred_node;
 	default:
 		BUG();

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 099/185] selftests: ftrace: Add probe event argument syntax testcase
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (91 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 098/185] mm/mempolicy.c: avoid use uninitialized preferred_node Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 100/185] selftests: ftrace: Add a testcase for string type with kprobe_event Greg Kroah-Hartman
                   ` (82 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu,
	Steven Rostedt (VMware),
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 871bef2000968c312a4000b2f56d370dcedbc93c ]

Add a testcase for probe event argument syntax which
ensures the kprobe_events interface correctly parses
given event arguments.

Link: http://lkml.kernel.org/r/152129033679.31874.12705519603869152799.stgit@devbox

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc |   97 ++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc

--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
@@ -0,0 +1,97 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe event argument syntax
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+grep "x8/16/32/64" README > /dev/null || exit_unsupported # version issue
+
+echo 0 > events/enable
+echo > kprobe_events
+
+PROBEFUNC="vfs_read"
+GOODREG=
+BADREG=
+GOODSYM="_sdata"
+if ! grep -qw ${GOODSYM} /proc/kallsyms ; then
+  GOODSYM=$PROBEFUNC
+fi
+BADSYM="deaqswdefr"
+SYMADDR=0x`grep -w ${GOODSYM} /proc/kallsyms | cut -f 1 -d " "`
+GOODTYPE="x16"
+BADTYPE="y16"
+
+case `uname -m` in
+x86_64|i[3456]86)
+  GOODREG=%ax
+  BADREG=%ex
+;;
+aarch64)
+  GOODREG=%x0
+  BADREG=%ax
+;;
+arm*)
+  GOODREG=%r0
+  BADREG=%ax
+;;
+esac
+
+test_goodarg() # Good-args
+{
+  while [ "$1" ]; do
+    echo "p ${PROBEFUNC} $1" > kprobe_events
+    shift 1
+  done;
+}
+
+test_badarg() # Bad-args
+{
+  while [ "$1" ]; do
+    ! echo "p ${PROBEFUNC} $1" > kprobe_events
+    shift 1
+  done;
+}
+
+echo > kprobe_events
+
+: "Register access"
+test_goodarg ${GOODREG}
+test_badarg ${BADREG}
+
+: "Symbol access"
+test_goodarg "@${GOODSYM}" "@${SYMADDR}" "@${GOODSYM}+10" "@${GOODSYM}-10"
+test_badarg "@" "@${BADSYM}" "@${GOODSYM}*10" "@${GOODSYM}/10" \
+	    "@${GOODSYM}%10" "@${GOODSYM}&10" "@${GOODSYM}|10"
+
+: "Stack access"
+test_goodarg "\$stack" "\$stack0" "\$stack1"
+test_badarg "\$stackp" "\$stack0+10" "\$stack1-10"
+
+: "Retval access"
+echo "r ${PROBEFUNC} \$retval" > kprobe_events
+! echo "p ${PROBEFUNC} \$retval" > kprobe_events
+
+: "Comm access"
+test_goodarg "\$comm"
+
+: "Indirect memory access"
+test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \
+	"+0(\$stack1)" "+10(@${GOODSYM}-10)" "+0(+10(+20(\$stack)))"
+test_badarg "+(${GOODREG})" "(${GOODREG}+10)" "-(${GOODREG})" "(${GOODREG})" \
+	"+10(\$comm)" "+0(${GOODREG})+10"
+
+: "Name assignment"
+test_goodarg "varname=${GOODREG}"
+test_badarg "varname=varname2=${GOODREG}"
+
+: "Type syntax"
+test_goodarg "${GOODREG}:${GOODTYPE}"
+test_badarg "${GOODREG}::${GOODTYPE}" "${GOODREG}:${BADTYPE}" \
+	"${GOODTYPE}:${GOODREG}"
+
+: "Combination check"
+
+test_goodarg "\$comm:string" "+0(\$stack):string"
+test_badarg "\$comm:x64" "\$stack:string" "${GOODREG}:string"
+
+echo > kprobe_events

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 100/185] selftests: ftrace: Add a testcase for string type with kprobe_event
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (92 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 099/185] selftests: ftrace: Add probe event argument syntax testcase Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 101/185] selftests: ftrace: Add a testcase for probepoint Greg Kroah-Hartman
                   ` (81 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu,
	Steven Rostedt (VMware),
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 5fbdbed797b6d12d043a5121fdbc8d8b49d10e80 ]

Add a testcase for string type with kprobe event.
This tests good/bad syntax combinations and also
the traced data is correct in several way.

Link: http://lkml.kernel.org/r/152129038381.31874.9201387794548737554.stgit@devbox

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc |   46 ++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc

--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_string.tc
@@ -0,0 +1,46 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe event string type argument
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+echo 0 > events/enable
+echo > kprobe_events
+
+case `uname -m` in
+x86_64)
+  ARG2=%si
+  OFFS=8
+;;
+i[3456]86)
+  ARG2=%cx
+  OFFS=4
+;;
+aarch64)
+  ARG2=%x1
+  OFFS=8
+;;
+arm*)
+  ARG2=%r1
+  OFFS=4
+;;
+*)
+  echo "Please implement other architecture here"
+  exit_untested
+esac
+
+: "Test get argument (1)"
+echo "p:testprobe create_trace_kprobe arg1=+0(+0(${ARG2})):string" > kprobe_events
+echo 1 > events/kprobes/testprobe/enable
+! echo test >> kprobe_events
+tail -n 1 trace | grep -qe "testprobe.* arg1=\"test\""
+
+echo 0 > events/kprobes/testprobe/enable
+: "Test get argument (2)"
+echo "p:testprobe create_trace_kprobe arg1=+0(+0(${ARG2})):string arg2=+0(+${OFFS}(${ARG2})):string" > kprobe_events
+echo 1 > events/kprobes/testprobe/enable
+! echo test1 test2 >> kprobe_events
+tail -n 1 trace | grep -qe "testprobe.* arg1=\"test1\" arg2=\"test2\""
+
+echo 0 > events/enable
+echo > kprobe_events

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 101/185] selftests: ftrace: Add a testcase for probepoint
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (93 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 100/185] selftests: ftrace: Add a testcase for string type with kprobe_event Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 104/185] net: qmi_wwan: add BroadMobi BM806U 2020:2033 Greg Kroah-Hartman
                   ` (80 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu,
	Steven Rostedt (VMware),
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit dfa453bc90eca0febff33c8d292a656e53702158 ]

Add a testcase for probe point definition. This tests
symbol, address and symbol+offset syntax. The offset
must be positive and smaller than UINT_MAX.

Link: http://lkml.kernel.org/r/152129043097.31874.14273580606301767394.stgit@devbox

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc |   43 +++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc

--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/probepoint.tc
@@ -0,0 +1,43 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Kprobe events - probe points
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+TARGET_FUNC=create_trace_kprobe
+
+dec_addr() { # hexaddr
+  printf "%d" "0x"`echo $1 | tail -c 8`
+}
+
+set_offs() { # prev target next
+  A1=`dec_addr $1`
+  A2=`dec_addr $2`
+  A3=`dec_addr $3`
+  TARGET="0x$2" # an address
+  PREV=`expr $A1 - $A2` # offset to previous symbol
+  NEXT=+`expr $A3 - $A2` # offset to next symbol
+  OVERFLOW=+`printf "0x%x" ${PREV}` # overflow offset to previous symbol
+}
+
+# We have to decode symbol addresses to get correct offsets.
+# If the offset is not an instruction boundary, it cause -EILSEQ.
+set_offs `grep -A1 -B1 ${TARGET_FUNC} /proc/kallsyms | cut -f 1 -d " " | xargs`
+
+UINT_TEST=no
+# printf "%x" -1 returns (unsigned long)-1.
+if [ `printf "%x" -1 | wc -c` != 9 ]; then
+  UINT_TEST=yes
+fi
+
+echo 0 > events/enable
+echo > kprobe_events
+echo "p:testprobe ${TARGET_FUNC}" > kprobe_events
+echo "p:testprobe ${TARGET}" > kprobe_events
+echo "p:testprobe ${TARGET_FUNC}${NEXT}" > kprobe_events
+! echo "p:testprobe ${TARGET_FUNC}${PREV}" > kprobe_events
+if [ "${UINT_TEST}" = yes ]; then
+! echo "p:testprobe ${TARGET_FUNC}${OVERFLOW}" > kprobe_events
+fi
+echo > kprobe_events
+clear_trace

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 104/185] net: qmi_wwan: add BroadMobi BM806U 2020:2033
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (94 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 101/185] selftests: ftrace: Add a testcase for probepoint Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 105/185] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 Greg Kroah-Hartman
                   ` (79 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Pawel Dembicki, David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pawel Dembicki <paweldembicki@gmail.com>

[ Upstream commit 743989254ea9f132517806d8893ca9b6cf9dc86b ]

BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem.
Tested hardware BM806U is mounted on D-Link DWR-921-C3 router.
The USB id is added to qmi_wwan.c to allow QMI communication with
the BM806U.

Tested on 4.14 kernel and OpenWRT.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -755,6 +755,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */
 	{QMI_FIXED_INTF(0x2001, 0x7e19, 4)},	/* D-Link DWM-221 B1 */
 	{QMI_FIXED_INTF(0x2001, 0x7e35, 4)},	/* D-Link DWM-222 */
+	{QMI_FIXED_INTF(0x2020, 0x2033, 4)},	/* BroadMobi BM806U */
 	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 105/185] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (95 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 104/185] net: qmi_wwan: add BroadMobi BM806U 2020:2033 Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 106/185] llc: properly handle dev_queue_xmit() return value Greg Kroah-Hartman
                   ` (78 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Giuseppe Lippolis, David S. Miller,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Giuseppe Lippolis <giu.lippolis@gmail.com>

[ Upstream commit d4c4bc11353f3bea6754f7d21e3612c9f32d1d64 ]

This modem is embedded on dlink dwr-921 router.
    The oem configuration states:

    T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=1435 ProdID=0918 Rev= 2.32
    S:  Manufacturer=Android
    S:  Product=Android
    S:  SerialNumber=0123456789ABCDEF
    C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
    E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
    E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Tested on openwrt distribution

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -679,6 +679,9 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
 	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
 	{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 3)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 106/185] llc: properly handle dev_queue_xmit() return value
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (96 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 105/185] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 107/185] net: Fix untag for vlan packets without ethernet header Greg Kroah-Hartman
                   ` (77 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Noam Rathaus, Cong Wang,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit b85ab56c3f81c5a24b5a5213374f549df06430da ]

llc_conn_send_pdu() pushes the skb into write queue and
calls llc_conn_send_pdus() to flush them out. However, the
status of dev_queue_xmit() is not returned to caller,
in this case, llc_conn_state_process().

llc_conn_state_process() needs hold the skb no matter
success or failure, because it still uses it after that,
therefore we should hold skb before dev_queue_xmit() when
that skb is the one being processed by llc_conn_state_process().

For other callers, they can just pass NULL and ignore
the return value as they are.

Reported-by: Noam Rathaus <noamr@beyondsecurity.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/llc_conn.h |    2 +-
 net/llc/llc_c_ac.c     |   15 +++++++++------
 net/llc/llc_conn.c     |   32 +++++++++++++++++++++++---------
 3 files changed, 33 insertions(+), 16 deletions(-)

--- a/include/net/llc_conn.h
+++ b/include/net/llc_conn.h
@@ -104,7 +104,7 @@ void llc_sk_reset(struct sock *sk);
 
 /* Access to a connection */
 int llc_conn_state_process(struct sock *sk, struct sk_buff *skb);
-void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
+int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_rtn_pdu(struct sock *sk, struct sk_buff *skb);
 void llc_conn_resend_i_pdu_as_cmd(struct sock *sk, u8 nr, u8 first_p_bit);
 void llc_conn_resend_i_pdu_as_rsp(struct sock *sk, u8 nr, u8 first_f_bit);
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -389,7 +389,7 @@ static int llc_conn_ac_send_i_cmd_p_set_
 	llc_pdu_init_as_i_cmd(skb, 0, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		llc_conn_send_pdu(sk, skb);
+		rc = llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
@@ -916,7 +916,7 @@ static int llc_conn_ac_send_i_rsp_f_set_
 	llc_pdu_init_as_i_cmd(skb, llc->ack_pf, llc->vS, llc->vR);
 	rc = llc_mac_hdr_init(skb, llc->dev->dev_addr, llc->daddr.mac);
 	if (likely(!rc)) {
-		llc_conn_send_pdu(sk, skb);
+		rc = llc_conn_send_pdu(sk, skb);
 		llc_conn_ac_inc_vs_by_1(sk, skb);
 	}
 	return rc;
@@ -935,14 +935,17 @@ static int llc_conn_ac_send_i_rsp_f_set_
 int llc_conn_ac_send_i_as_ack(struct sock *sk, struct sk_buff *skb)
 {
 	struct llc_sock *llc = llc_sk(sk);
+	int ret;
 
 	if (llc->ack_must_be_send) {
-		llc_conn_ac_send_i_rsp_f_set_ackpf(sk, skb);
+		ret = llc_conn_ac_send_i_rsp_f_set_ackpf(sk, skb);
 		llc->ack_must_be_send = 0 ;
 		llc->ack_pf = 0;
-	} else
-		llc_conn_ac_send_i_cmd_p_set_0(sk, skb);
-	return 0;
+	} else {
+		ret = llc_conn_ac_send_i_cmd_p_set_0(sk, skb);
+	}
+
+	return ret;
 }
 
 /**
--- a/net/llc/llc_conn.c
+++ b/net/llc/llc_conn.c
@@ -30,7 +30,7 @@
 #endif
 
 static int llc_find_offset(int state, int ev_type);
-static void llc_conn_send_pdus(struct sock *sk);
+static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *skb);
 static int llc_conn_service(struct sock *sk, struct sk_buff *skb);
 static int llc_exec_conn_trans_actions(struct sock *sk,
 				       struct llc_conn_state_trans *trans,
@@ -193,11 +193,11 @@ out_skb_put:
 	return rc;
 }
 
-void llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
+int llc_conn_send_pdu(struct sock *sk, struct sk_buff *skb)
 {
 	/* queue PDU to send to MAC layer */
 	skb_queue_tail(&sk->sk_write_queue, skb);
-	llc_conn_send_pdus(sk);
+	return llc_conn_send_pdus(sk, skb);
 }
 
 /**
@@ -255,7 +255,7 @@ void llc_conn_resend_i_pdu_as_cmd(struct
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk);
+	llc_conn_send_pdus(sk, NULL);
 out:;
 }
 
@@ -296,7 +296,7 @@ void llc_conn_resend_i_pdu_as_rsp(struct
 	if (howmany_resend > 0)
 		llc->vS = (llc->vS + 1) % LLC_2_SEQ_NBR_MODULO;
 	/* any PDUs to re-send are queued up; start sending to MAC */
-	llc_conn_send_pdus(sk);
+	llc_conn_send_pdus(sk, NULL);
 out:;
 }
 
@@ -340,12 +340,16 @@ out:
 /**
  *	llc_conn_send_pdus - Sends queued PDUs
  *	@sk: active connection
+ *	@hold_skb: the skb held by caller, or NULL if does not care
  *
- *	Sends queued pdus to MAC layer for transmission.
+ *	Sends queued pdus to MAC layer for transmission. When @hold_skb is
+ *	NULL, always return 0. Otherwise, return 0 if @hold_skb is sent
+ *	successfully, or 1 for failure.
  */
-static void llc_conn_send_pdus(struct sock *sk)
+static int llc_conn_send_pdus(struct sock *sk, struct sk_buff *hold_skb)
 {
 	struct sk_buff *skb;
+	int ret = 0;
 
 	while ((skb = skb_dequeue(&sk->sk_write_queue)) != NULL) {
 		struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -357,10 +361,20 @@ static void llc_conn_send_pdus(struct so
 			skb_queue_tail(&llc_sk(sk)->pdu_unack_q, skb);
 			if (!skb2)
 				break;
-			skb = skb2;
+			dev_queue_xmit(skb2);
+		} else {
+			bool is_target = skb == hold_skb;
+			int rc;
+
+			if (is_target)
+				skb_get(skb);
+			rc = dev_queue_xmit(skb);
+			if (is_target)
+				ret = rc;
 		}
-		dev_queue_xmit(skb);
 	}
+
+	return ret;
 }
 
 /**

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 107/185] net: Fix untag for vlan packets without ethernet header
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (97 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 106/185] llc: properly handle dev_queue_xmit() return value Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 108/185] net: mvneta: fix enable of all initialized RXQs Greg Kroah-Hartman
                   ` (76 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Toshiaki Makita,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>

[ Upstream commit ae4745730cf8e693d354ccd4dbaf59ea440c09a9 ]

In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol, and skb_vlan_untag() attempts to untag such
packets.

skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it)
however did not expect packets without ethernet headers, so in such a case
size argument for memmove() underflowed and triggered crash.

====
BUG: unable to handle kernel paging request at ffff8801cccb8000
IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101
Oops: 000b [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287
RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2
RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000
RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899
R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4
R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40
FS:  00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
 memmove include/linux/string.h:360 [inline]
 skb_reorder_vlan_header net/core/skbuff.c:5031 [inline]
 skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061
 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460
 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627
 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701
 netif_receive_skb+0xae/0x390 net/core/dev.c:4725
 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555
 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962
 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990
 call_write_iter include/linux/fs.h:1782 [inline]
 new_sync_write fs/read_write.c:469 [inline]
 __vfs_write+0x684/0x970 fs/read_write.c:482
 vfs_write+0x189/0x510 fs/read_write.c:544
 SYSC_write fs/read_write.c:589 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:581
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454879
RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879
RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000
Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20
RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28
CR2: ffff8801cccb8000
====

We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.

Fixes: 4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4137,8 +4137,10 @@ static struct sk_buff *skb_reorder_vlan_
 	}
 
 	mac_len = skb->data - skb_mac_header(skb);
-	memmove(skb_mac_header(skb) + VLAN_HLEN, skb_mac_header(skb),
-		mac_len - VLAN_HLEN - ETH_TLEN);
+	if (likely(mac_len > VLAN_HLEN + ETH_TLEN)) {
+		memmove(skb_mac_header(skb) + VLAN_HLEN, skb_mac_header(skb),
+			mac_len - VLAN_HLEN - ETH_TLEN);
+	}
 	skb->mac_header += VLAN_HLEN;
 	return skb;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 108/185] net: mvneta: fix enable of all initialized RXQs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (98 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 107/185] net: Fix untag for vlan packets without ethernet header Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 109/185] sh: fix debug trap failure to process signals before return to user Greg Kroah-Hartman
                   ` (75 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yelena Krivosheev, Thomas Petazzoni,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yelena Krivosheev <yelena@marvell.com>

[ Upstream commit e81b5e01c14add8395dfba7130f8829206bb507d ]

In mvneta_port_up() we enable relevant RX and TX port queues by write
queues bit map to an appropriate register.

q_map must be ZERO in the beginning of this process.

Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -748,6 +748,7 @@ static void mvneta_port_up(struct mvneta
 	}
 	mvreg_write(pp, MVNETA_TXQ_CMD, q_map);
 
+	q_map = 0;
 	/* Enable all initialized RXQs. */
 	q_map = 0;
 	for (queue = 0; queue < rxq_number; queue++) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 109/185] sh: fix debug trap failure to process signals before return to user
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (99 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 108/185] net: mvneta: fix enable of all initialized RXQs Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 110/185] fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table Greg Kroah-Hartman
                   ` (74 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Rich Felker, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rich Felker <dalias@libc.org>

[ Upstream commit 96a598996f6ac518ac79839ecbb17c91af91f4f7 ]

When responding to a debug trap (breakpoint) in userspace, the
kernel's trap handler raised SIGTRAP but returned from the trap via a
code path that ignored pending signals, resulting in an infinite loop
re-executing the trapping instruction.

Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sh/kernel/entry-common.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -255,7 +255,7 @@ debug_trap:
 	mov.l	@r8, r8
 	jsr	@r8
 	 nop
-	bra	__restore_all
+	bra	ret_from_exception
 	 nop
 	CFI_ENDPROC
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 110/185] fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (100 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 109/185] sh: fix debug trap failure to process signals before return to user Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 111/185] swap: divide-by-zero when zero length swap file on ssd Greg Kroah-Hartman
                   ` (73 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Danilo Krummrich, Kees Cook,
	Andrew Morton, Luis R . Rodriguez, Eric W. Biederman,
	Alexey Dobriyan, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Danilo Krummrich <danilokrummrich@dk-develop.de>

[ Upstream commit a0b0d1c345d0317efe594df268feb5ccc99f651e ]

proc_sys_link_fill_cache() does not take currently unregistering sysctl
tables into account, which might result into a page fault in
sysctl_follow_link() - add a check to fix it.

This bug has been present since v3.4.

Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de
Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/proc_sysctl.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -617,7 +617,10 @@ static bool proc_sys_link_fill_cache(str
 				    struct ctl_table *table)
 {
 	bool ret = true;
+
 	head = sysctl_head_grab(head);
+	if (IS_ERR(head))
+		return false;
 
 	if (S_ISLNK(table->mode)) {
 		/* It is not an error if we can not follow the link ignore it */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 111/185] swap: divide-by-zero when zero length swap file on ssd
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (101 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 110/185] fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 112/185] sr: get/drop reference to device in revalidate and check_events Greg Kroah-Hartman
                   ` (72 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thomas Abraham, Mark.Landis,
	Andrew Morton, Randy Dunlap, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Abraham <tabraham@suse.com>

[ Upstream commit a06ad633a37c64a0cd4c229fc605cee8725d376e ]

Calling swapon() on a zero length swap file on SSD can lead to a
divide-by-zero.

Although creating such files isn't possible with mkswap and they woud be
considered invalid, it would be better for the swapon code to be more
robust and handle this condition gracefully (return -EINVAL).
Especially since the fix is small and straightforward.

To help with wear leveling on SSD, the swapon syscall calculates a
random position in the swap file using modulo p->highest_bit, which is
set to maxpages - 1 in read_swap_header.

If the swap file is zero length, read_swap_header sets maxpages=1 and
last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we
modulo p->highest_bit in swapon syscall.

This can be prevented by having read_swap_header return zero if
last_page is zero.

Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.com
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reported-by: <Mark.Landis@Teradata.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/swapfile.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2217,6 +2217,10 @@ static unsigned long read_swap_header(st
 	maxpages = swp_offset(pte_to_swp_entry(
 			swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
 	last_page = swap_header->info.last_page;
+	if (!last_page) {
+		pr_warn("Empty swap-file\n");
+		return 0;
+	}
 	if (last_page > maxpages) {
 		pr_warn("Truncating oversized swap area, only using %luk out of %luk\n",
 			maxpages << (PAGE_SHIFT - 10),

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 112/185] sr: get/drop reference to device in revalidate and check_events
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (102 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 111/185] swap: divide-by-zero when zero length swap file on ssd Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 113/185] Force log to disk before reading the AGF during a fstrim Greg Kroah-Hartman
                   ` (71 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lee Duncan, Jan Kara, Jens Axboe,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 2d097c50212e137e7b53ffe3b37561153eeba87d ]

We can't just use scsi_cd() to get the scsi_cd structure, we have
to grab a live reference to the device. For both callbacks, we're
not inside an open where we already hold a reference to the device.

This fixes device removal/addition under concurrent device access,
which otherwise could result in the below oops.

NULL pointer dereference at 0000000000000010
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
sr 12:0:0:0: [sr2] scsi-1 drive
 scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl
sr 12:0:0:0: Attached scsi CD-ROM sr2
 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc
sr 12:0:0:0: Attached scsi generic sg7 type 5
 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif]
CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650
Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016
RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod]
RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292
RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66
RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000
RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d
R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000
FS:  00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? __invalidate_device+0x48/0x60
 check_disk_change+0x4c/0x60
 sr_block_open+0x16/0xd0 [sr_mod]
 __blkdev_get+0xb9/0x450
 ? iget5_locked+0x1c0/0x1e0
 blkdev_get+0x11e/0x320
 ? bdget+0x11d/0x150
 ? _raw_spin_unlock+0xa/0x20
 ? bd_acquire+0xc0/0xc0
 do_dentry_open+0x1b0/0x320
 ? inode_permission+0x24/0xc0
 path_openat+0x4e6/0x1420
 ? cpumask_any_but+0x1f/0x40
 ? flush_tlb_mm_range+0xa0/0x120
 do_filp_open+0x8c/0xf0
 ? __seccomp_filter+0x28/0x230
 ? _raw_spin_unlock+0xa/0x20
 ? __handle_mm_fault+0x7d6/0x9b0
 ? list_lru_add+0xa8/0xc0
 ? _raw_spin_unlock+0xa/0x20
 ? __alloc_fd+0xaf/0x160
 ? do_sys_open+0x1a6/0x230
 do_sys_open+0x1a6/0x230
 do_syscall_64+0x5a/0x100
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/sr.c |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -587,18 +587,28 @@ out:
 static unsigned int sr_block_check_events(struct gendisk *disk,
 					  unsigned int clearing)
 {
-	struct scsi_cd *cd = scsi_cd(disk);
+	unsigned int ret = 0;
+	struct scsi_cd *cd;
 
-	if (atomic_read(&cd->device->disk_events_disable_depth))
+	cd = scsi_cd_get(disk);
+	if (!cd)
 		return 0;
 
-	return cdrom_check_events(&cd->cdi, clearing);
+	if (!atomic_read(&cd->device->disk_events_disable_depth))
+		ret = cdrom_check_events(&cd->cdi, clearing);
+
+	scsi_cd_put(cd);
+	return ret;
 }
 
 static int sr_block_revalidate_disk(struct gendisk *disk)
 {
-	struct scsi_cd *cd = scsi_cd(disk);
 	struct scsi_sense_hdr sshdr;
+	struct scsi_cd *cd;
+
+	cd = scsi_cd_get(disk);
+	if (!cd)
+		return -ENXIO;
 
 	/* if the unit is not ready, nothing more to do */
 	if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
@@ -607,6 +617,7 @@ static int sr_block_revalidate_disk(stru
 	sr_cd_check(&cd->cdi);
 	get_sectorsize(cd);
 out:
+	scsi_cd_put(cd);
 	return 0;
 }
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 113/185] Force log to disk before reading the AGF during a fstrim
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (103 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 112/185] sr: get/drop reference to device in revalidate and check_events Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 114/185] scsi: aacraid: Insure command thread is not recursively stopped Greg Kroah-Hartman
                   ` (70 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Carlos Maiolino, Darrick J. Wong,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Carlos Maiolino <cmaiolino@redhat.com>

[ Upstream commit 8c81dd46ef3c416b3b95e3020fb90dbd44e6140b ]

Forcing the log to disk after reading the agf is wrong, we might be
calling xfs_log_force with XFS_LOG_SYNC with a metadata lock held.

This can cause a deadlock when racing a fstrim with a filesystem
shutdown.

The deadlock has been identified due a miscalculation bug in device-mapper
dm-thin, which returns lack of space to its users earlier than the device itself
really runs out of space, changing the device-mapper volume into an error state.

The problem happened while filling the filesystem with a single file,
triggering the bug in device-mapper, consequently causing an IO error
and shutting down the filesystem.

If such file is removed, and fstrim executed before the XFS finishes the
shut down process, the fstrim process will end up holding the buffer
lock, and going to sleep on the cil wait queue.

At this point, the shut down process will try to wake up all the threads
waiting on the cil wait queue, but for this, it will try to hold the
same buffer log already held my the fstrim, locking up the filesystem.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/xfs_discard.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/fs/xfs/xfs_discard.c
+++ b/fs/xfs/xfs_discard.c
@@ -51,19 +51,19 @@ xfs_trim_extents(
 
 	pag = xfs_perag_get(mp, agno);
 
-	error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
-	if (error || !agbp)
-		goto out_put_perag;
-
-	cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
-
 	/*
 	 * Force out the log.  This means any transactions that might have freed
-	 * space before we took the AGF buffer lock are now on disk, and the
+	 * space before we take the AGF buffer lock are now on disk, and the
 	 * volatile disk cache is flushed.
 	 */
 	xfs_log_force(mp, XFS_LOG_SYNC);
 
+	error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
+	if (error || !agbp)
+		goto out_put_perag;
+
+	cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
+
 	/*
 	 * Look up the longest btree in the AGF and start with it.
 	 */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 114/185] scsi: aacraid: Insure command thread is not recursively stopped
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (104 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 113/185] Force log to disk before reading the AGF during a fstrim Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 115/185] dp83640: Ensure against premature access to PHY registers after reset Greg Kroah-Hartman
                   ` (69 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dave Carroll,
	Raghava Aditya Renukunta, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Carroll <david.carroll@microsemi.com>

[ Upstream commit 1c6b41fb92936fa5facea464d5d7cbf855966d04 ]

If a recursive IOP_RESET is invoked, usually due to the eh_thread
handling errors after the first reset, be sure we flag that the command
thread has been stopped to avoid an Oops of the form;

 [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1
 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000
 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10
 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le)
 [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000
 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000
 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477
 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940
 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8
 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e
 [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000
 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8
 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700
 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160
 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620804] Call Trace:
 [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable)
 [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0
 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0
 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid]
 [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid]
 [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180
 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0
 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730
 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0
 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4
 [ 336.645971] Instruction dump:
 [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000
 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4
 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]-

So flag when the thread is stopped by setting the thread pointer to NULL.

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/aacraid/commsup.c |    4 +++-
 drivers/scsi/aacraid/linit.c   |    1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1270,9 +1270,10 @@ static int _aac_reset_adapter(struct aac
 	host = aac->scsi_host_ptr;
 	scsi_block_requests(host);
 	aac_adapter_disable_int(aac);
-	if (aac->thread->pid != current->pid) {
+	if (aac->thread && aac->thread->pid != current->pid) {
 		spin_unlock_irq(host->host_lock);
 		kthread_stop(aac->thread);
+		aac->thread = NULL;
 		jafo = 1;
 	}
 
@@ -1343,6 +1344,7 @@ static int _aac_reset_adapter(struct aac
 					  aac->name);
 		if (IS_ERR(aac->thread)) {
 			retval = PTR_ERR(aac->thread);
+			aac->thread = NULL;
 			goto out;
 		}
 	}
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1096,6 +1096,7 @@ static void __aac_shutdown(struct aac_de
 				up(&fib->event_wait);
 		}
 		kthread_stop(aac->thread);
+		aac->thread = NULL;
 	}
 	aac_send_shutdown(aac);
 	aac_adapter_disable_int(aac);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 115/185] dp83640: Ensure against premature access to PHY registers after reset
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (105 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 114/185] scsi: aacraid: Insure command thread is not recursively stopped Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 116/185] mm/ksm: fix interaction with THP Greg Kroah-Hartman
                   ` (68 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Esben Haabendal, Andrew Lunn,
	David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Esben Haabendal <eha@deif.com>

[ Upstream commit 76327a35caabd1a932e83d6a42b967aa08584e5d ]

The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.

Signed-off-by: Esben Haabendal <eha@deif.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/dp83640.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1173,6 +1173,23 @@ static void dp83640_remove(struct phy_de
 	kfree(dp83640);
 }
 
+static int dp83640_soft_reset(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_soft_reset(phydev);
+	if (ret < 0)
+		return ret;
+
+	/* From DP83640 datasheet: "Software driver code must wait 3 us
+	 * following a software reset before allowing further serial MII
+	 * operations with the DP83640."
+	 */
+	udelay(10);		/* Taking udelay inaccuracy into account */
+
+	return 0;
+}
+
 static int dp83640_config_init(struct phy_device *phydev)
 {
 	struct dp83640_private *dp83640 = phydev->priv;
@@ -1470,6 +1487,7 @@ static struct phy_driver dp83640_driver
 	.flags		= PHY_HAS_INTERRUPT,
 	.probe		= dp83640_probe,
 	.remove		= dp83640_remove,
+	.soft_reset	= dp83640_soft_reset,
 	.config_init	= dp83640_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 116/185] mm/ksm: fix interaction with THP
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (106 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 115/185] dp83640: Ensure against premature access to PHY registers after reset Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 117/185] mm: fix races between address_space dereference and free in page_evicatable Greg Kroah-Hartman
                   ` (67 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Claudio Imbrenda, Andrew Morton,
	Andrea Arcangeli, Minchan Kim, Kirill A. Shutemov, Hugh Dickins,
	Christian Borntraeger, Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>

[ Upstream commit 77da2ba0648a4fd52e5ff97b8b2b8dd312aec4b0 ]

This patch fixes a corner case for KSM.  When two pages belong or
belonged to the same transparent hugepage, and they should be merged,
KSM fails to split the page, and therefore no merging happens.

This bug can be reproduced by:
* making sure ksm is running (in case disabling ksmtuned)
* enabling transparent hugepages
* allocating a THP-aligned 1-THP-sized buffer
  e.g. on amd64: posix_memalign(&p, 1<<21, 1<<21)
* filling it with the same values
  e.g. memset(p, 42, 1<<21)
* performing madvise to make it mergeable
  e.g. madvise(p, 1<<21, MADV_MERGEABLE)
* waiting for KSM to perform a few scans

The expected outcome is that the all the pages get merged (1 shared and
the rest sharing); the actual outcome is that no pages get merged (1
unshared and the rest volatile)

The reason of this behaviour is that we increase the reference count
once for both pages we want to merge, but if they belong to the same
hugepage (or compound page), the reference counter used in both cases is
the one of the head of the compound page.  This means that
split_huge_page will find a value of the reference counter too high and
will fail.

This patch solves this problem by testing if the two pages to merge
belong to the same hugepage when attempting to merge them.  If so, the
hugepage is split safely.  This means that the hugepage is not split if
not necessary.

Link: http://lkml.kernel.org/r/1521548069-24758-1-git-send-email-imbrenda@linux.vnet.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Co-authored-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/ksm.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1475,8 +1475,22 @@ static void cmp_and_merge_page(struct pa
 	tree_rmap_item =
 		unstable_tree_search_insert(rmap_item, page, &tree_page);
 	if (tree_rmap_item) {
+		bool split;
+
 		kpage = try_to_merge_two_pages(rmap_item, page,
 						tree_rmap_item, tree_page);
+		/*
+		 * If both pages we tried to merge belong to the same compound
+		 * page, then we actually ended up increasing the reference
+		 * count of the same compound page twice, and split_huge_page
+		 * failed.
+		 * Here we set a flag if that happened, and we use it later to
+		 * try split_huge_page again. Since we call put_page right
+		 * afterwards, the reference count will be correct and
+		 * split_huge_page should succeed.
+		 */
+		split = PageTransCompound(page)
+			&& compound_head(page) == compound_head(tree_page);
 		put_page(tree_page);
 		if (kpage) {
 			/*
@@ -1501,6 +1515,20 @@ static void cmp_and_merge_page(struct pa
 				break_cow(tree_rmap_item);
 				break_cow(rmap_item);
 			}
+		} else if (split) {
+			/*
+			 * We are here if we tried to merge two pages and
+			 * failed because they both belonged to the same
+			 * compound page. We will split the page now, but no
+			 * merging will take place.
+			 * We do not want to add the cost of a full lock; if
+			 * the page is locked, it is better to skip it and
+			 * perhaps try again later.
+			 */
+			if (!trylock_page(page))
+				return;
+			split_huge_page(page);
+			unlock_page(page);
 		}
 	}
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 117/185] mm: fix races between address_space dereference and free in page_evicatable
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (107 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 116/185] mm/ksm: fix interaction with THP Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 118/185] Btrfs: bail out on error during replay_dir_deletes Greg Kroah-Hartman
                   ` (66 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Huang, Ying, Jan Kara, Andrew Morton,
	Mel Gorman, Minchan Kim, Johannes Weiner, Michal Hocko,
	Linus Torvalds, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huang Ying <ying.huang@intel.com>

[ Upstream commit e92bb4dd9673945179b1fc738c9817dd91bfb629 ]

When page_mapping() is called and the mapping is dereferenced in
page_evicatable() through shrink_active_list(), it is possible for the
inode to be truncated and the embedded address space to be freed at the
same time.  This may lead to the following race.

CPU1                                                CPU2

truncate(inode)                                     shrink_active_list()
  ...                                                 page_evictable(page)
  truncate_inode_page(mapping, page);
    delete_from_page_cache(page)
      spin_lock_irqsave(&mapping->tree_lock, flags);
        __delete_from_page_cache(page, NULL)
          page_cache_tree_delete(..)
            ...                                         mapping = page_mapping(page);
            page->mapping = NULL;
            ...
      spin_unlock_irqrestore(&mapping->tree_lock, flags);
      page_cache_free_page(mapping, page)
        put_page(page)
          if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space

                                                        mapping_unevictable(mapping)
							  test_bit(AS_UNEVICTABLE, &mapping->flags);
- we've dereferenced mapping which is potentially already free.

Similar race exists between swap cache freeing and page_evicatable()
too.

The address_space in inode and swap cache will be freed after a RCU
grace period.  So the races are fixed via enclosing the page_mapping()
and address_space usage in rcu_read_lock/unlock().  Some comments are
added in code to make it clear what is protected by the RCU read lock.

Link: http://lkml.kernel.org/r/20180212081227.1940-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmscan.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -3753,7 +3753,13 @@ int zone_reclaim(struct zone *zone, gfp_
  */
 int page_evictable(struct page *page)
 {
-	return !mapping_unevictable(page_mapping(page)) && !PageMlocked(page);
+	int ret;
+
+	/* Prevent address_space of inode and swap cache from being freed */
+	rcu_read_lock();
+	ret = !mapping_unevictable(page_mapping(page)) && !PageMlocked(page);
+	rcu_read_unlock();
+	return ret;
 }
 
 #ifdef CONFIG_SHMEM

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 118/185] Btrfs: bail out on error during replay_dir_deletes
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (108 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 117/185] mm: fix races between address_space dereference and free in page_evicatable Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 119/185] Btrfs: fix NULL pointer dereference in log_dir_items Greg Kroah-Hartman
                   ` (65 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nikolay Borisov, Liu Bo,
	David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.liu@linux.alibaba.com>

[ Upstream commit b98def7ca6e152ee55e36863dddf6f41f12d1dc6 ]

If errors were returned by btrfs_next_leaf(), replay_dir_deletes needs
to bail out, otherwise @ret would be forced to be 0 after 'break;' and
the caller won't be aware of it.

Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tree-log.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1983,8 +1983,10 @@ again:
 			nritems = btrfs_header_nritems(path->nodes[0]);
 			if (path->slots[0] >= nritems) {
 				ret = btrfs_next_leaf(root, path);
-				if (ret)
+				if (ret == 1)
 					break;
+				else if (ret < 0)
+					goto out;
 			}
 			btrfs_item_key_to_cpu(path->nodes[0], &found_key,
 					      path->slots[0]);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 119/185] Btrfs: fix NULL pointer dereference in log_dir_items
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (109 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 118/185] Btrfs: bail out on error during replay_dir_deletes Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 120/185] btrfs: Fix possible softlock on single core machines Greg Kroah-Hartman
                   ` (64 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nikolay Borisov, Liu Bo,
	David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liu Bo <bo.liu@linux.alibaba.com>

[ Upstream commit 80c0b4210a963e31529e15bf90519708ec947596 ]

0, 1 and <0 can be returned by btrfs_next_leaf(), and when <0 is
returned, path->nodes[0] could be NULL, log_dir_items lacks such a
check for <0 and we may run into a null pointer dereference panic.

Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tree-log.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3085,8 +3085,11 @@ static noinline int log_dir_items(struct
 		 * from this directory and from this transaction
 		 */
 		ret = btrfs_next_leaf(root, path);
-		if (ret == 1) {
-			last_offset = (u64)-1;
+		if (ret) {
+			if (ret == 1)
+				last_offset = (u64)-1;
+			else
+				err = ret;
 			goto done;
 		}
 		btrfs_item_key_to_cpu(path->nodes[0], &tmp, path->slots[0]);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 120/185] btrfs: Fix possible softlock on single core machines
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (110 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 119/185] Btrfs: fix NULL pointer dereference in log_dir_items Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 121/185] sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning Greg Kroah-Hartman
                   ` (63 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nikolay Borisov, David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 1e1c50a929bc9e49bc3f9935b92450d9e69f8158 ]

do_chunk_alloc implements a loop checking whether there is a pending
chunk allocation and if so causes the caller do loop. Generally this
loop is executed only once, however testing with btrfs/072 on a single
core vm machines uncovered an extreme case where the system could loop
indefinitely. This is due to a missing cond_resched when loop which
doesn't give a chance to the previous chunk allocator finish its job.

The fix is to simply add the missing cond_resched.

Fixes: 6d74119f1a3e ("Btrfs: avoid taking the chunk_mutex in do_chunk_alloc")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3946,6 +3946,7 @@ again:
 	if (wait_for_alloc) {
 		mutex_unlock(&fs_info->chunk_mutex);
 		wait_for_alloc = 0;
+		cond_resched();
 		goto again;
 	}
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 121/185] sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (111 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 120/185] btrfs: Fix possible softlock on single core machines Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 124/185] btrfs: tests/qgroup: Fix wrong tree backref level Greg Kroah-Hartman
                   ` (62 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Davidlohr Bueso, Matt Fleming,
	Peter Zijlstra (Intel),
	Linus Torvalds, Mike Galbraith, Thomas Gleixner, dave, rostedt,
	Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Davidlohr Bueso <dave@stgolabs.net>

[ Upstream commit d29a20645d5e929aa7e8616f28e5d8e1c49263ec ]

While running rt-tests' pi_stress program I got the following splat:

  rq->clock_update_flags < RQCF_ACT_SKIP
  WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20

  [...]

  <IRQ>
  enqueue_top_rt_rq+0xf4/0x150
  ? cpufreq_dbs_governor_start+0x170/0x170
  sched_rt_rq_enqueue+0x65/0x80
  sched_rt_period_timer+0x156/0x360
  ? sched_rt_rq_enqueue+0x80/0x80
  __hrtimer_run_queues+0xfa/0x260
  hrtimer_interrupt+0xcb/0x220
  smp_apic_timer_interrupt+0x62/0x120
  apic_timer_interrupt+0xf/0x20
  </IRQ>

  [...]

  do_idle+0x183/0x1e0
  cpu_startup_entry+0x5f/0x70
  start_secondary+0x192/0x1d0
  secondary_startup_64+0xa5/0xb0

We can get rid of it be the "traditional" means of adding an
update_rq_clock() call after acquiring the rq->lock in
do_sched_rt_period_timer().

The case for the RT task throttling (which this workload also hits)
can be ignored in that the skip_update call is actually bogus and
quite the contrary (the request bits are removed/reverted).

By setting RQCF_UPDATED we really don't care if the skip is happening
or not and will therefore make the assert_clock_updated() check happy.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/sched/rt.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -818,6 +818,8 @@ static int do_sched_rt_period_timer(stru
 		struct rq *rq = rq_of_rt_rq(rt_rq);
 
 		raw_spin_lock(&rq->lock);
+		update_rq_clock(rq);
+
 		if (rt_rq->rt_time) {
 			u64 runtime;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 124/185] btrfs: tests/qgroup: Fix wrong tree backref level
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (112 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 121/185] sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 125/185] Btrfs: fix copy_items() return value when logging an inode Greg Kroah-Hartman
                   ` (61 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Qu Wenruo, David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit 3c0efdf03b2d127f0e40e30db4e7aa0429b1b79a ]

The extent tree of the test fs is like the following:

 BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919
  item 0 key (4096 168 4096) itemoff 3944 itemsize 51
          extent refs 1 gen 1 flags 2
          tree block key (68719476736 0 0) level 1
                                           ^^^^^^^
          ref#0: tree block backref root 5

And it's using an empty tree for fs tree, so there is no way that its
level can be 1.

For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:

 item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
         refs 1 gen 4 flags TREE_BLOCK
         tree block key (256 INODE_ITEM 0) level 0
                                           ^^^^^^^
         tree block backref root 5

Fix the level to 0, so it won't break later tree level checker.

Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tests/qgroup-tests.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/tests/qgroup-tests.c
+++ b/fs/btrfs/tests/qgroup-tests.c
@@ -69,7 +69,7 @@ static int insert_normal_tree_ref(struct
 	btrfs_set_extent_generation(leaf, item, 1);
 	btrfs_set_extent_flags(leaf, item, BTRFS_EXTENT_FLAG_TREE_BLOCK);
 	block_info = (struct btrfs_tree_block_info *)(item + 1);
-	btrfs_set_tree_block_level(leaf, block_info, 1);
+	btrfs_set_tree_block_level(leaf, block_info, 0);
 	iref = (struct btrfs_extent_inline_ref *)(block_info + 1);
 	if (parent > 0) {
 		btrfs_set_extent_inline_ref_type(leaf, iref,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 125/185] Btrfs: fix copy_items() return value when logging an inode
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (113 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 124/185] btrfs: tests/qgroup: Fix wrong tree backref level Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 126/185] btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers Greg Kroah-Hartman
                   ` (60 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 8434ec46c6e3232cebc25a910363b29f5c617820 ]

When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.

Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).

Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/tree-log.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3539,6 +3539,7 @@ fill_holes:
 			ASSERT(ret == 0);
 			src = src_path->nodes[0];
 			i = 0;
+			need_find_last_extent = true;
 		}
 
 		btrfs_item_key_to_cpu(src, &key, i);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 126/185] btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (114 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 125/185] Btrfs: fix copy_items() return value when logging an inode Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 127/185] xen/acpi: off by one in read_acpi_id() Greg Kroah-Hartman
                   ` (59 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jeff Mahoney, Liu Bo, David Sterba,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Mahoney <jeffm@suse.com>

[ Upstream commit 8a5a916d9a35e13576d79cc16e24611821b13e34 ]

While running btrfs/011, I hit the following lockdep splat.

This is the important bit:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]

The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.

This switches it to GFP_NOFS.

========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G        W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
 (&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
 (pcpu_alloc_mutex){+.+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcpu_alloc_mutex);
                               local_irq_disable();
                               lock(&delayed_node->mutex);
                               lock(&found->groups_sem);
  <Interrupt>
    lock(&delayed_node->mutex);

 *** DEADLOCK ***

2 locks held by kswapd0/50:
 #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
 #1:  (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50

the shortest dependencies between 2nd lock and 1st lock:
   -> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
      HARDIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      SOFTIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      RECLAIM_FS-ON-W at:
                             __kmalloc+0x47/0x310
                             pcpu_extend_area_map+0x2b/0xc0
                             pcpu_alloc+0x3ec/0x5e0
                             alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                             __do_tune_cpucache+0x2c/0x220
                             do_tune_cpucache+0x26/0xc0
                             enable_cpucache+0x6d/0xf0
                             __kmem_cache_create+0x1bf/0x390
                             create_cache+0xba/0x1b0
                             kmem_cache_create+0x1f8/0x2b0
                             ksm_init+0x6f/0x19d
                             do_one_initcall+0x50/0x1b0
                             kernel_init_freeable+0x201/0x289
                             kernel_init+0xa/0x100
                             ret_from_fork+0x3a/0x50
      INITIAL USE at:
                         __mutex_lock+0x4e/0x8c0
                         pcpu_alloc+0x1ac/0x5e0
                         alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                         setup_cpu_cache+0x2f/0x1f0
                         __kmem_cache_create+0x1bf/0x390
                         create_boot_cache+0x8b/0xb1
                         kmem_cache_init+0xa1/0x19e
                         start_kernel+0x270/0x4cb
                         x86_64_start_kernel+0x127/0x134
                         secondary_startup_64+0xa5/0xb0
    }
    ... key      at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
    ... acquired at:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
   transaction_kthread+0x176/0x1b0 [btrfs]
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

  -> (&fs_info->commit_root_sem){++++..} ops: 1566382 {
     HARDIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     HARDIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     SOFTIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     SOFTIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     INITIAL USE at:
                       down_write+0x3e/0xa0
                       cache_block_group+0x287/0x420 [btrfs]
                       find_free_extent+0x106c/0x12d0 [btrfs]
                       btrfs_reserve_extent+0xd8/0x170 [btrfs]
                       cow_file_range.isra.66+0x133/0x470 [btrfs]
                       run_delalloc_range+0x121/0x410 [btrfs]
                       writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                       __extent_writepage+0x19a/0x360 [btrfs]
                       extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                       extent_writepages+0x4d/0x60 [btrfs]
                       do_writepages+0x1a/0x70
                       __filemap_fdatawrite_range+0xa7/0xe0
                       btrfs_rename+0x5ee/0xdb0 [btrfs]
                       vfs_rename+0x52a/0x7e0
                       SyS_rename+0x351/0x3b0
                       do_syscall_64+0x79/0x1e0
                       entry_SYSCALL_64_after_hwframe+0x42/0xb7
   }
   ... key      at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
   ... acquired at:
   cache_block_group+0x287/0x420 [btrfs]
   find_free_extent+0x106c/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   btrfs_create_tree+0xbb/0x2a0 [btrfs]
   btrfs_create_uuid_tree+0x37/0x140 [btrfs]
   open_ctree+0x23c0/0x2660 [btrfs]
   btrfs_mount+0xd36/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   btrfs_mount+0x18c/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   do_mount+0x1c1/0xcc0
   SyS_mount+0x7e/0xd0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

 -> (&found->groups_sem){++++..} ops: 2134587 {
    HARDIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    HARDIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    INITIAL USE at:
                     down_write+0x3e/0xa0
                     __link_block_group+0x34/0x130 [btrfs]
                     btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                     open_ctree+0x2054/0x2660 [btrfs]
                     btrfs_mount+0xd36/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     btrfs_mount+0x18c/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     do_mount+0x1c1/0xcc0
                     SyS_mount+0x7e/0xd0
                     do_syscall_64+0x79/0x1e0
                     entry_SYSCALL_64_after_hwframe+0x42/0xb7
  }
  ... key      at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
  ... acquired at:
   find_free_extent+0xcb4/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   __btrfs_cow_block+0x110/0x5b0 [btrfs]
   btrfs_cow_block+0xd7/0x290 [btrfs]
   btrfs_search_slot+0x1f6/0x960 [btrfs]
   btrfs_lookup_inode+0x2a/0x90 [btrfs]
   __btrfs_update_delayed_inode+0x65/0x210 [btrfs]
   btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
   btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
   evict+0xc4/0x190
   __dentry_kill+0xbf/0x170
   dput+0x2ae/0x2f0
   SyS_rename+0x2a6/0x3b0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> (&delayed_node->mutex){+.+.-.} ops: 5580204 {
   HARDIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   SOFTIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   IN-RECLAIM_FS-W at:
                       __mutex_lock+0x4e/0x8c0
                       __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
                       btrfs_evict_inode+0x22c/0x6a0 [btrfs]
                       evict+0xc4/0x190
                       dispose_list+0x35/0x50
                       prune_icache_sb+0x42/0x50
                       super_cache_scan+0x139/0x190
                       shrink_slab+0x262/0x5b0
                       shrink_node+0x2eb/0x2f0
                       kswapd+0x2eb/0x890
                       kthread+0x102/0x140
                       ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   __mutex_lock+0x4e/0x8c0
                   btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                   btrfs_update_inode+0x83/0x110 [btrfs]
                   btrfs_dirty_inode+0x62/0xe0 [btrfs]
                   touch_atime+0x8c/0xb0
                   do_generic_file_read+0x818/0xb10
                   __vfs_read+0xdc/0x150
                   vfs_read+0x8a/0x130
                   SyS_read+0x45/0xa0
                   do_syscall_64+0x79/0x1e0
                   entry_SYSCALL_64_after_hwframe+0x42/0xb7
 }
 ... key      at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
 ... acquired at:
   __lock_acquire+0x264/0x11c0
   lock_acquire+0xbd/0x1e0
   __mutex_lock+0x4e/0x8c0
   __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
   btrfs_evict_inode+0x22c/0x6a0 [btrfs]
   evict+0xc4/0x190
   dispose_list+0x35/0x50
   prune_icache_sb+0x42/0x50
   super_cache_scan+0x139/0x190
   shrink_slab+0x262/0x5b0
   shrink_node+0x2eb/0x2f0
   kswapd+0x2eb/0x890
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G        W        4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x78/0xb7
 print_irq_inversion_bug.part.38+0x19f/0x1aa
 check_usage_forwards+0x102/0x120
 ? ret_from_fork+0x3a/0x50
 ? check_usage_backwards+0x110/0x110
 mark_lock+0x16c/0x270
 __lock_acquire+0x264/0x11c0
 ? pagevec_lookup_entries+0x1a/0x30
 ? truncate_inode_pages_range+0x2b3/0x7f0
 lock_acquire+0xbd/0x1e0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 __mutex_lock+0x4e/0x8c0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 btrfs_evict_inode+0x22c/0x6a0 [btrfs]
 evict+0xc4/0x190
 dispose_list+0x35/0x50
 prune_icache_sb+0x42/0x50
 super_cache_scan+0x139/0x190
 shrink_slab+0x262/0x5b0
 shrink_node+0x2eb/0x2f0
 kswapd+0x2eb/0x890
 kthread+0x102/0x140
 ? mem_cgroup_shrink_node+0x2c0/0x2c0
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x3a/0x50

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/disk-io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1194,7 +1194,7 @@ static struct btrfs_subvolume_writers *b
 	if (!writers)
 		return ERR_PTR(-ENOMEM);
 
-	ret = percpu_counter_init(&writers->counter, 0, GFP_KERNEL);
+	ret = percpu_counter_init(&writers->counter, 0, GFP_NOFS);
 	if (ret < 0) {
 		kfree(writers);
 		return ERR_PTR(ret);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 127/185] xen/acpi: off by one in read_acpi_id()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (115 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 126/185] btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 128/185] ACPI: acpi_pad: Fix memory leak in power saving threads Greg Kroah-Hartman
                   ` (58 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Joao Martins,
	Juergen Gross, Boris Ostrovsky, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit c37a3c94775855567b90f91775b9691e10bd2806 ]

If acpi_id is == nr_acpi_bits, then we access one element beyond the end
of the acpi_psd[] array or we set one bit beyond the end of the bit map
when we do __set_bit(acpi_id, acpi_id_present);

Fixes: 59a568029181 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-acpi-processor.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/xen/xen-acpi-processor.c
+++ b/drivers/xen/xen-acpi-processor.c
@@ -362,9 +362,9 @@ read_acpi_id(acpi_handle handle, u32 lvl
 	}
 	/* There are more ACPI Processor objects than in x2APIC or MADT.
 	 * This can happen with incorrect ACPI SSDT declerations. */
-	if (acpi_id > nr_acpi_bits) {
-		pr_debug("We only have %u, trying to set %u\n",
-			 nr_acpi_bits, acpi_id);
+	if (acpi_id >= nr_acpi_bits) {
+		pr_debug("max acpi id %u, trying to set %u\n",
+			 nr_acpi_bits - 1, acpi_id);
 		return AE_OK;
 	}
 	/* OK, There is a ACPI Processor object */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 128/185] ACPI: acpi_pad: Fix memory leak in power saving threads
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (116 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 127/185] xen/acpi: off by one in read_acpi_id() Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 129/185] powerpc/mpic: Check if cpu_possible() in mpic_physmask() Greg Kroah-Hartman
                   ` (57 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lenny Szubowicz, Rafael J. Wysocki,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lenny Szubowicz <lszubowi@redhat.com>

[ Upstream commit 8b29d29abc484d638213dd79a18a95ae7e5bb402 ]

Fix once per second (round_robin_time) memory leak of about 1 KB in
each acpi_pad kernel idling thread that is activated.

Found by testing with kmemleak.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/acpi_pad.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -117,6 +117,7 @@ static void round_robin_cpu(unsigned int
 		cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
 	if (cpumask_empty(tmp)) {
 		mutex_unlock(&round_robin_lock);
+		free_cpumask_var(tmp);
 		return;
 	}
 	for_each_cpu(cpu, tmp) {
@@ -134,6 +135,8 @@ static void round_robin_cpu(unsigned int
 	mutex_unlock(&round_robin_lock);
 
 	set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
+
+	free_cpumask_var(tmp);
 }
 
 static void exit_round_robin(unsigned int tsk_index)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 129/185] powerpc/mpic: Check if cpu_possible() in mpic_physmask()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (117 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 128/185] ACPI: acpi_pad: Fix memory leak in power saving threads Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 130/185] m68k: set dma and coherent masks for platform FEC ethernets Greg Kroah-Hartman
                   ` (56 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Michael Ellerman, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit 0834d627fbea00c1444075eb3e448e1974da452d ]

In mpic_physmask() we loop over all CPUs up to 32, then get the hard
SMP processor id of that CPU.

Currently that's possibly walking off the end of the paca array, but
in a future patch we will change the paca array to be an array of
pointers, and in that case we will get a NULL for missing CPUs and
oops. eg:

  Unable to handle kernel paging request for data at address 0x88888888888888b8
  Faulting instruction address: 0xc00000000004e380
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  NIP .mpic_set_affinity+0x60/0x1a0
  LR  .irq_do_set_affinity+0x48/0x100

Fix it by checking the CPU is possible, this also fixes the code if
there are gaps in the CPU numbering which probably never happens on
mpic systems but who knows.

Debugged-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/sysdev/mpic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -627,7 +627,7 @@ static inline u32 mpic_physmask(u32 cpum
 	int i;
 	u32 mask = 0;
 
-	for (i = 0; i < min(32, NR_CPUS); ++i, cpumask >>= 1)
+	for (i = 0; i < min(32, NR_CPUS) && cpu_possible(i); ++i, cpumask >>= 1)
 		mask |= (cpumask & 1) << get_hard_smp_processor_id(i);
 	return mask;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 130/185] m68k: set dma and coherent masks for platform FEC ethernets
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (118 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 129/185] powerpc/mpic: Check if cpu_possible() in mpic_physmask() Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 131/185] parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode Greg Kroah-Hartman
                   ` (55 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Ungerer <gerg@linux-m68k.org>

[ Upstream commit f61e64310b75733d782e930d1fb404b84699eed6 ]

As of commit 205e1b7f51e4 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:

WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
        41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
        400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
        40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
        00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
        7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
        40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
        [<40025534>] 0x40025534
 [<4004e514>] 0x4004e514
 [<400255de>] 0x400255de
 [<40159e20>] 0x40159e20
 [<40159e20>] 0x40159e20

It is not fatal, the driver and the system continue to function normally.

As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/m68k/coldfire/device.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -135,7 +135,11 @@ static struct platform_device mcf_fec0 =
 	.id			= 0,
 	.num_resources		= ARRAY_SIZE(mcf_fec0_resources),
 	.resource		= mcf_fec0_resources,
-	.dev.platform_data	= FEC_PDATA,
+	.dev = {
+		.dma_mask		= &mcf_fec0.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= FEC_PDATA,
+	}
 };
 
 #ifdef MCFFEC_BASE1
@@ -167,7 +171,11 @@ static struct platform_device mcf_fec1 =
 	.id			= 1,
 	.num_resources		= ARRAY_SIZE(mcf_fec1_resources),
 	.resource		= mcf_fec1_resources,
-	.dev.platform_data	= FEC_PDATA,
+	.dev = {
+		.dma_mask		= &mcf_fec1.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= FEC_PDATA,
+	}
 };
 #endif /* MCFFEC_BASE1 */
 #endif /* CONFIG_FEC */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 131/185] parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (119 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 130/185] m68k: set dma and coherent masks for platform FEC ethernets Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 132/185] hwmon: (nct6775) Fix writing pwmX_mode Greg Kroah-Hartman
                   ` (54 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Carlo Pisani, Kyle McMartin,
	Grant Grundler, Helge Deller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

[ Upstream commit b845f66f78bf42a4ce98e5cfe0e94fab41dd0742 ]

Carlo Pisani noticed that his C3600 workstation behaved unstable during heavy
I/O on the PCI bus with a VIA VT6421 IDE/SATA PCI card.

To avoid such instability, this patch switches the LBA PCI bus from Hard Fail
mode into Soft Fail mode. In this mode the bus will return -1UL for timed out
MMIO transactions, which is exactly how the x86 (and most other architectures)
PCI busses behave.

This patch is based on a proposal by Grant Grundler and Kyle McMartin 10
years ago:
https://www.spinics.net/lists/linux-parisc/msg01027.html

Cc: Carlo Pisani <carlojpisani@gmail.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Reviewed-by: Grant Grundler <grantgrundler@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/parisc/lba_pci.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1366,9 +1366,27 @@ lba_hw_init(struct lba_device *d)
 		WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG);
 	}
 
-	/* Set HF mode as the default (vs. -1 mode). */
+
+	/*
+	 * Hard Fail vs. Soft Fail on PCI "Master Abort".
+	 *
+	 * "Master Abort" means the MMIO transaction timed out - usually due to
+	 * the device not responding to an MMIO read. We would like HF to be
+	 * enabled to find driver problems, though it means the system will
+	 * crash with a HPMC.
+	 *
+	 * In SoftFail mode "~0L" is returned as a result of a timeout on the
+	 * pci bus. This is like how PCI busses on x86 and most other
+	 * architectures behave.  In order to increase compatibility with
+	 * existing (x86) PCI hardware and existing Linux drivers we enable
+	 * Soft Faul mode on PA-RISC now too.
+	 */
         stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL);
+#if defined(ENABLE_HARDFAIL)
 	WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#else
+	WRITE_REG32(stat & ~HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#endif
 
 	/*
 	** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 132/185] hwmon: (nct6775) Fix writing pwmX_mode
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (120 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 131/185] parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 133/185] powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer Greg Kroah-Hartman
                   ` (53 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 415eb2a1aaa4881cf85bd86c683356fdd8094a23 ]

pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip
register bit is set to 1 for DC mode. This got mixed up, and writing
1 into pwmX_mode resulted in DC mode enabled. Fix it up by using
the ABI definition throughout the driver for consistency.

Fixes: 77eb5b3703d99 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/nct6775.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -1286,7 +1286,7 @@ static void nct6775_update_pwm(struct de
 		duty_is_dc = data->REG_PWM_MODE[i] &&
 		  (nct6775_read_value(data, data->REG_PWM_MODE[i])
 		   & data->PWM_MODE_MASK[i]);
-		data->pwm_mode[i] = duty_is_dc;
+		data->pwm_mode[i] = !duty_is_dc;
 
 		fanmodecfg = nct6775_read_value(data, data->REG_FAN_MODE[i]);
 		for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) {
@@ -2145,7 +2145,7 @@ show_pwm_mode(struct device *dev, struct
 	struct nct6775_data *data = nct6775_update_device(dev);
 	struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
 
-	return sprintf(buf, "%d\n", !data->pwm_mode[sattr->index]);
+	return sprintf(buf, "%d\n", data->pwm_mode[sattr->index]);
 }
 
 static ssize_t
@@ -2166,9 +2166,9 @@ store_pwm_mode(struct device *dev, struc
 	if (val > 1)
 		return -EINVAL;
 
-	/* Setting DC mode is not supported for all chips/channels */
+	/* Setting DC mode (0) is not supported for all chips/channels */
 	if (data->REG_PWM_MODE[nr] == 0) {
-		if (val)
+		if (!val)
 			return -EINVAL;
 		return count;
 	}
@@ -2177,7 +2177,7 @@ store_pwm_mode(struct device *dev, struc
 	data->pwm_mode[nr] = val;
 	reg = nct6775_read_value(data, data->REG_PWM_MODE[nr]);
 	reg &= ~data->PWM_MODE_MASK[nr];
-	if (val)
+	if (!val)
 		reg |= data->PWM_MODE_MASK[nr];
 	nct6775_write_value(data, data->REG_PWM_MODE[nr], reg);
 	mutex_unlock(&data->update_lock);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 133/185] powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (121 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 132/185] hwmon: (nct6775) Fix writing pwmX_mode Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 134/185] powerpc/perf: Fix kernel address leak via sampling registers Greg Kroah-Hartman
                   ` (52 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Balbir Singh, Madhavan Srinivasan,
	Michael Ellerman, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>

[ Upstream commit bb19af816025d495376bd76bf6fbcf4244f9a06d ]

The current Branch History Rolling Buffer (BHRB) code does not check
for any privilege levels before updating the data from BHRB. This
could leak kernel addresses to userspace even when profiling only with
userspace privileges. Add proper checks to prevent it.

Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/perf/core-book3s.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -443,6 +443,16 @@ static void power_pmu_bhrb_read(struct c
 				/* invalid entry */
 				continue;
 
+			/*
+			 * BHRB rolling buffer could very much contain the kernel
+			 * addresses at this point. Check the privileges before
+			 * exporting it to userspace (avoid exposure of regions
+			 * where we could have speculative execution)
+			 */
+			if (perf_paranoid_kernel() && !capable(CAP_SYS_ADMIN) &&
+				is_kernel_addr(addr))
+				continue;
+
 			/* Branches are read most recent first (ie. mfbhrb 0 is
 			 * the most recent branch).
 			 * There are two types of valid entries:

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 134/185] powerpc/perf: Fix kernel address leak via sampling registers
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (122 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 133/185] powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 135/185] tools/thermal: tmon: fix for segfault Greg Kroah-Hartman
                   ` (51 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Madhavan Srinivasan,
	Michael Ellerman, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

[ Upstream commit e1ebd0e5b9d0a10ba65e63a3514b6da8c6a5a819 ]

Current code in power_pmu_disable() does not clear the sampling
registers like Sampling Instruction Address Register (SIAR) and
Sampling Data Address Register (SDAR) after disabling the PMU. Since
these are userspace readable and could contain kernel addresses, add
code to explicitly clear the content of these registers.

Also add a "context synchronizing instruction" to enforce no further
updates to these registers as suggested by Power ISA v3.0B. From
section 9.4, on page 1108:

  "If an mtspr instruction is executed that changes the value of a
  Performance Monitor register other than SIAR, SDAR, and SIER, the
  change is not guaranteed to have taken effect until after a
  subsequent context synchronizing instruction has been executed (see
  Chapter 11. "Synchronization Requirements for Context Alterations"
  on page 1133)."

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Massage change log and add ISA reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/perf/core-book3s.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -1193,6 +1193,7 @@ static void power_pmu_disable(struct pmu
 		 */
 		write_mmcr0(cpuhw, val);
 		mb();
+		isync();
 
 		/*
 		 * Disable instruction sampling if it was enabled
@@ -1201,12 +1202,26 @@ static void power_pmu_disable(struct pmu
 			mtspr(SPRN_MMCRA,
 			      cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 			mb();
+			isync();
 		}
 
 		cpuhw->disabled = 1;
 		cpuhw->n_added = 0;
 
 		ebb_switch_out(mmcr0);
+
+#ifdef CONFIG_PPC64
+		/*
+		 * These are readable by userspace, may contain kernel
+		 * addresses and are not switched by context switch, so clear
+		 * them now to avoid leaking anything to userspace in general
+		 * including to another process.
+		 */
+		if (ppmu->flags & PPMU_ARCH_207S) {
+			mtspr(SPRN_SDAR, 0);
+			mtspr(SPRN_SIAR, 0);
+		}
+#endif
 	}
 
 	local_irq_restore(flags);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 135/185] tools/thermal: tmon: fix for segfault
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (123 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 134/185] powerpc/perf: Fix kernel address leak via sampling registers Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 136/185] net/mlx5: Protect from command bit overflow Greg Kroah-Hartman
                   ` (50 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Frank Asseg, Jiri Kosina, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frank Asseg <frank.asseg@objecthunter.net>

[ Upstream commit 6c59f64b7ecf2bccbe73931d7d573d66ed13b537 ]

Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the
ncurses tmon application. The segfault is caused by incrementing
cur_thermal_record in the main function without checking if it's value reached
NR_THERMAL_RECORD immediately. Since the boundary check only occurred in
update_thermal_data a race condition existed, which lead to an attempted read
beyond the last element of the trec array.

The fix was implemented by moving the cur_thermal_record incrementation to the
update_thermal_data function using a temporary variable on which the boundary
condition is checked before updating cur_thread_record, so that the variable is
never incremented beyond the trec array's boundary.

It seems the segfault does not occur on every machine: On a HP EliteBook G4 the
segfault happens, while it does not happen on a Thinkpad T540p.

Signed-off-by: Frank Asseg <frank.asseg@objecthunter.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/thermal/tmon/sysfs.c |   12 +++++++-----
 tools/thermal/tmon/tmon.c  |    1 -
 2 files changed, 7 insertions(+), 6 deletions(-)

--- a/tools/thermal/tmon/sysfs.c
+++ b/tools/thermal/tmon/sysfs.c
@@ -486,6 +486,7 @@ int zone_instance_to_index(int zone_inst
 int update_thermal_data()
 {
 	int i;
+	int next_thermal_record = cur_thermal_record + 1;
 	char tz_name[256];
 	static unsigned long samples;
 
@@ -495,9 +496,9 @@ int update_thermal_data()
 	}
 
 	/* circular buffer for keeping historic data */
-	if (cur_thermal_record >= NR_THERMAL_RECORDS)
-		cur_thermal_record = 0;
-	gettimeofday(&trec[cur_thermal_record].tv, NULL);
+	if (next_thermal_record >= NR_THERMAL_RECORDS)
+		next_thermal_record = 0;
+	gettimeofday(&trec[next_thermal_record].tv, NULL);
 	if (tmon_log) {
 		fprintf(tmon_log, "%lu ", ++samples);
 		fprintf(tmon_log, "%3.1f ", p_param.t_target);
@@ -507,11 +508,12 @@ int update_thermal_data()
 		snprintf(tz_name, 256, "%s/%s%d", THERMAL_SYSFS, TZONE,
 			ptdata.tzi[i].instance);
 		sysfs_get_ulong(tz_name, "temp",
-				&trec[cur_thermal_record].temp[i]);
+				&trec[next_thermal_record].temp[i]);
 		if (tmon_log)
 			fprintf(tmon_log, "%lu ",
-				trec[cur_thermal_record].temp[i]/1000);
+				trec[next_thermal_record].temp[i] / 1000);
 	}
+	cur_thermal_record = next_thermal_record;
 	for (i = 0; i < ptdata.nr_cooling_dev; i++) {
 		char cdev_name[256];
 		unsigned long val;
--- a/tools/thermal/tmon/tmon.c
+++ b/tools/thermal/tmon/tmon.c
@@ -326,7 +326,6 @@ int main(int argc, char **argv)
 			show_data_w();
 			show_cooling_device();
 		}
-		cur_thermal_record++;
 		time_elapsed += ticktime;
 		controller_handler(trec[0].temp[target_tz_index] / 1000,
 				&yk);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 136/185] net/mlx5: Protect from command bit overflow
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (124 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 135/185] tools/thermal: tmon: fix for segfault Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 137/185] ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) Greg Kroah-Hartman
                   ` (49 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Leon Romanovsky, Saeed Mahameed, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 957f6ba8adc7be401a74ccff427e4cfd88d3bfcb ]

The system with CONFIG_UBSAN enabled on produces the following error
during driver initialization. The reason to it that max_reg_cmds can be
larger enough to cause to "1 << max_reg_cmds" overflow the unsigned long.

================================================================================
UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1805:42
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00032-g06cda2358d9b-dirty #724
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
 dump_stack+0xe9/0x18f
 ? dma_virt_alloc+0x81/0x81
 ubsan_epilogue+0xe/0x4e
 handle_overflow+0x187/0x20c
 mlx5_cmd_init+0x73a/0x12b0
 mlx5_load_one+0x1c3d/0x1d30
 init_one+0xd02/0xf10
 pci_device_probe+0x26c/0x3b0
 driver_probe_device+0x622/0xb40
 __driver_attach+0x175/0x1b0
 bus_for_each_dev+0xef/0x190
 bus_add_driver+0x2db/0x490
 driver_register+0x16b/0x1e0
 __pci_register_driver+0x177/0x1b0
 init+0x6d/0x92
 do_one_initcall+0x15b/0x270
 kernel_init_freeable+0x2d8/0x3d0
 kernel_init+0x14/0x190
 ret_from_fork+0x24/0x30
================================================================================

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -1371,7 +1371,7 @@ int mlx5_cmd_init(struct mlx5_core_dev *
 
 	cmd->checksum_disabled = 1;
 	cmd->max_reg_cmds = (1 << cmd->log_sz) - 1;
-	cmd->bitmask = (1 << cmd->max_reg_cmds) - 1;
+	cmd->bitmask = (1UL << cmd->max_reg_cmds) - 1;
 
 	cmd->cmdif_rev = ioread32be(&dev->iseg->cmdif_rev_fw_sub) >> 16;
 	if (cmd->cmdif_rev > CMD_IF_REV) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 137/185] ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (125 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 136/185] net/mlx5: Protect from command bit overflow Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:02 ` [PATCH 3.18 138/185] ima: Fallback to the builtin hash algorithm Greg Kroah-Hartman
                   ` (48 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Karthikeyan Periyasamy, Kalle Valo,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karthikeyan Periyasamy <periyasa@codeaurora.org>

[ Upstream commit 8b2d93dd22615cb7f3046a5a2083a6f8bb8052ed ]

When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.

This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.

It is caused by the following scenario steps.

Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
   fails to do the state change for a station from IEEE80211_STA_NOTEXIST
   to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
   called from ieee80211_add_station() to handle the new station
   (neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
   the mesh_neighbour_update() to handle the beacon frames of the above
   neighbor mesh node. since its atomic callback, ath10k driver queue the
   work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
   object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
   the station object which is already deleted. so it will trigger kernel
   panic.

Added the peer exist check in sta_rc_update callback before queue the work.

Kernel Panic log:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1
task: dcef0000 ti: d72b6000 task.ti: d72b6000
PC is at pwq_activate_delayed_work+0x10/0x40
LR is at pwq_activate_delayed_work+0xc/0x40
pc : [<c023f988>]    lr : [<c023f984>]    psr: 40000193
sp : d72b7f18  ip : 0000007a  fp : d72b6000
r10: 00000000  r9 : dd404414  r8 : d8c31998
r7 : d72b6038  r6 : 00000004  r5 : d4907ec8  r4 : dcee1300
r3 : ffffffe0  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 595bc06a  DAC: 00000015
...
Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238)
Stack: (0xd72b7f18 to 0xd72b8000)
7f00:                                                       00000001 dcee1300
7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089
7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000
7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000
7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340
7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000
7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4)
[<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360)
[<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec)
[<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34)
Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs
Rebooting in 3 seconds..

Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/mac.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4319,10 +4319,20 @@ static void ath10k_sta_rc_update(struct
 {
 	struct ath10k *ar = hw->priv;
 	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k_vif *arvif = (void *)vif->drv_priv;
+	struct ath10k_peer *peer;
 	u32 bw, smps;
 
 	spin_lock_bh(&ar->data_lock);
 
+	peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr);
+	if (!peer) {
+		spin_unlock_bh(&ar->data_lock);
+		ath10k_warn(ar, "mac sta rc update failed to find peer %pM on vdev %i\n",
+			    sta->addr, arvif->vdev_id);
+		return;
+	}
+
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
 		   "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
 		   sta->addr, changed, sta->bandwidth, sta->rx_nss,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 138/185] ima: Fallback to the builtin hash algorithm
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (126 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 137/185] ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) Greg Kroah-Hartman
@ 2018-05-28 10:02 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 139/185] virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS Greg Kroah-Hartman
                   ` (47 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:02 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Petr Vorel, Mimi Zohar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Petr Vorel <pvorel@suse.cz>

[ Upstream commit ab60368ab6a452466885ef4edf0cefd089465132 ]

IMA requires having it's hash algorithm be compiled-in due to it's
early use.  The default IMA algorithm is protected by Kconfig to be
compiled-in.

The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()).  Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.

Fixed crash:

$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[    1.545190] ima: Can not allocate md4 (reason: -2)
...
[    2.610120] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    2.611903] IP: ima_match_policy+0x23/0x390
[    2.612967] PGD 0 P4D 0
[    2.613080] Oops: 0000 [#1] SMP
[    2.613080] Modules linked in: autofs4
[    2.613080] Supported: Yes
[    2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[    2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[    2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000
[    2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[    2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296
[    2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004
[    2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728
[    2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000
[    2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000
[    2.613080] FS:  00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[    2.613080] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0
[    2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.613080] Call Trace:
[    2.613080]  ? shmem_mknod+0xbf/0xd0
[    2.613080]  ima_post_path_mknod+0x1c/0x40
[    2.613080]  SyS_mknod+0x210/0x220
[    2.613080]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[    2.613080] RIP: 0033:0x7f5c1bfde570
[    2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085
[    2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570
[    2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f
[    2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000
[    2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002
[    2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[    2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88
[    2.613080] CR2: 0000000000000000
[    2.613080] ---[ end trace 9a9f0a8a73079f6a ]---
[    2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    2.673052]
[    2.675337] Kernel Offset: disabled
[    2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009

Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/ima/ima_crypto.c |    2 ++
 security/integrity/ima/ima_main.c   |   13 +++++++++++++
 2 files changed, 15 insertions(+)

--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -108,6 +108,8 @@ int __init ima_init_crypto(void)
 		       hash_algo_name[ima_hash_algo], rc);
 		return rc;
 	}
+	pr_info("Allocated hash algorithm: %s\n",
+		hash_algo_name[ima_hash_algo]);
 	return 0;
 }
 
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -16,6 +16,9 @@
  *	implements the IMA hooks: ima_bprm_check, ima_file_mmap,
  *	and ima_file_check.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/file.h>
 #include <linux/binfmts.h>
@@ -351,6 +354,16 @@ static int __init init_ima(void)
 
 	hash_setup(CONFIG_IMA_DEFAULT_HASH);
 	error = ima_init();
+
+	if (error && strcmp(hash_algo_name[ima_hash_algo],
+			    CONFIG_IMA_DEFAULT_HASH) != 0) {
+		pr_info("Allocating %s failed, going to use default hash algorithm %s\n",
+			hash_algo_name[ima_hash_algo], CONFIG_IMA_DEFAULT_HASH);
+		hash_setup_done = 0;
+		hash_setup(CONFIG_IMA_DEFAULT_HASH);
+		error = ima_init();
+	}
+
 	if (!error) {
 		ima_initialized = 1;
 		ima_update_policy_flag();

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 139/185] virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (127 preceding siblings ...)
  2018-05-28 10:02 ` [PATCH 3.18 138/185] ima: Fallback to the builtin hash algorithm Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 140/185] arm: dts: socfpga: fix GIC PPI warning Greg Kroah-Hartman
                   ` (46 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michael S. Tsirkin, Jason Wang,
	Ben Hutchings, Jay Vosburgh, David S. Miller, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jay Vosburgh <jay.vosburgh@canonical.com>

[ Upstream commit bda7fab54828bbef2164bb23c0f6b1a7d05cc718 ]

The operstate update logic will leave an interface in the
default UNKNOWN operstate if the interface carrier state never changes
from the default carrier up state set at creation.  This includes the
case of an explicit call to netif_carrier_on, as the carrier on to on
transition has no effect on operstate.

	This affects virtio-net for the case that the virtio peer does
not support VIRTIO_NET_F_STATUS (the feature that provides carrier state
updates).  Without this feature, the virtio specification states that
"the link should be assumed active," so, logically, the operstate should
be UP instead of UNKNOWN.  This has impact on user space applications
that use the operstate to make availability decisions for the interface.

	Resolve this by changing the virtio probe logic slightly to call
netif_carrier_off for both the "with" and "without" VIRTIO_NET_F_STATUS
cases, and then the existing call to netif_carrier_on for the "without"
case will cause an operstate transition.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/virtio_net.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1876,8 +1876,8 @@ static int virtnet_probe(struct virtio_d
 
 	/* Assume link up if device can't report link status,
 	   otherwise get link status from config. */
+	netif_carrier_off(dev);
 	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
-		netif_carrier_off(dev);
 		schedule_work(&vi->config_work);
 	} else {
 		vi->status = VIRTIO_NET_S_LINK_UP;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 140/185] arm: dts: socfpga: fix GIC PPI warning
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (128 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 139/185] virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 141/185] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields Greg Kroah-Hartman
                   ` (45 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Philipp Puschmann, Dinh Nguyen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Puschmann <pp@emlix.com>

[ Upstream commit 6d97d5aba08b26108f95dc9fb7bbe4d9436c769c ]

Fixes the warning "GIC: PPI13 is secure or misconfigured" by
changing the interrupt type from level_low to edge_raising

Signed-off-by: Philipp Puschmann <pp@emlix.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/socfpga.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -643,7 +643,7 @@
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 141/185] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (129 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 140/185] arm: dts: socfpga: fix GIC PPI warning Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 142/185] zorro: Set up z->dev.dma_mask for the DMA API Greg Kroah-Hartman
                   ` (44 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thinh Nguyen, Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 0cab8d26d6e5e053b2bed3356992aaa71dc93628 ]

Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP
is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM.

The GTXFIFOSIZ register for DWC_usb31 is as follows:
 +-------+-----------+----------------------------------+
 | BITS  | Name      | Description                      |
 +=======+===========+==================================+
 | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address |
 | 15    | TXFRAMNUM | Asynchronous/Periodic TXFIFO     |
 | 14:0  | TXFDEP    | TXFIFO Depth                     |
 +-------+-----------+----------------------------------+

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/core.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -178,6 +178,8 @@
 #define DWC3_GUSB3PIPECTL_SUSPHY	(1 << 17)
 
 /* Global TX Fifo Size Register */
+#define DWC31_GTXFIFOSIZ_TXFRAMNUM	BIT(15)		/* DWC_usb31 only */
+#define DWC31_GTXFIFOSIZ_TXFDEF(n)	((n) & 0x7fff)	/* DWC_usb31 only */
 #define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 142/185] zorro: Set up z->dev.dma_mask for the DMA API
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (130 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 141/185] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 143/185] bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set Greg Kroah-Hartman
                   ` (43 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michael Schmitz, Christoph Hellwig,
	Geert Uytterhoeven, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Schmitz <schmitzmic@gmail.com>

[ Upstream commit 55496d3fe2acd1a365c43cbd613a20ecd4d74395 ]

The generic DMA API uses dev->dma_mask to check the DMA addressable
memory bitmask, and warns if no mask is set or even allocated.

Set z->dev.dma_coherent_mask on Zorro bus scan, and make z->dev.dma_mask
to point to z->dev.dma_coherent_mask so device drivers that need DMA have
everything set up to avoid warnings from dma_alloc_coherent(). Drivers can
still use dma_set_mask_and_coherent() to explicitly set their DMA bit mask.

Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
[geert: Handle Zorro II with 24-bit address space]
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/zorro/zorro.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -16,6 +16,7 @@
 #include <linux/bitops.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/slab.h>
 
 #include <asm/byteorder.h>
@@ -185,6 +186,17 @@ static int __init amiga_zorro_probe(stru
 		z->dev.parent = &bus->dev;
 		z->dev.bus = &zorro_bus_type;
 		z->dev.id = i;
+		switch (z->rom.er_Type & ERT_TYPEMASK) {
+		case ERT_ZORROIII:
+			z->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+			break;
+
+		case ERT_ZORROII:
+		default:
+			z->dev.coherent_dma_mask = DMA_BIT_MASK(24);
+			break;
+		}
+		z->dev.dma_mask = &z->dev.coherent_dma_mask;
 	}
 
 	/* ... then register them */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 143/185] bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (131 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 142/185] zorro: Set up z->dev.dma_mask for the DMA API Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 144/185] ACPICA: Events: add a return on failure from acpi_hw_register_read Greg Kroah-Hartman
                   ` (42 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Coly Li, Michael Lyle,
	Hannes Reinecke, Huijun Tang, Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Coly Li <colyli@suse.de>

[ Upstream commit fadd94e05c02afec7b70b0b14915624f1782f578 ]

In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
    'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.

This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.

Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.

It is safe to do the following check without locking, let me explain why,
+	if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+	    (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {

If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
   kthread_stop() from cached_dev_detach_finish() will wake up it and
   terminate by making kthread_should_stop() return true. And in normal
   run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
   condition
	!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
   is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
   go to sleep,
   "!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
   each of them independently controls the writeback thread should sleep or
   not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
   If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
   call bch_writeback_queue() immediately or call bch_writeback_add() which
   indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
   wake_up_process(dc->writeback_thread) is called. It sets writeback
   thread's task state to TASK_RUNNING and following an implicit memory
   barrier, then tries to wake up the writeback thread.
   In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
   doing the condition check. If other CPU core sets the TASK_RUNNING state
   after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
   will be scheduled to run very soon because its state is not
   TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
   writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
   of wake_up_process() will make sure modification of dc->has_dirty on
   other CPU core is updated and observed on the CPU core of writeback
   thread. Therefore the condition check will correctly be false, and
   continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
   dc->writeback_running can be changed via sysfs file, every time it is
   modified, a following bch_writeback_queue() is alwasy called. So the
   change is always observed on the CPU core of writeback thread. If
   dc->writeback_running is changed from 0 to 1 on other CPU core, this
   condition check will observe the modification and allow writeback
   thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.

I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Huijun Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/bcache/writeback.c |   20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -426,9 +426,15 @@ static int bch_writeback_thread(void *ar
 	while (!kthread_should_stop()) {
 		down_write(&dc->writeback_lock);
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (!atomic_read(&dc->has_dirty) ||
-		    (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
-		     !dc->writeback_running)) {
+		/*
+		 * If the bache device is detaching, skip here and continue
+		 * to perform writeback. Otherwise, if no dirty data on cache,
+		 * or there is dirty data on cache but writeback is disabled,
+		 * the writeback thread should sleep here and wait for others
+		 * to wake up it.
+		 */
+		if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+		    (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
 			up_write(&dc->writeback_lock);
 
 			if (kthread_should_stop()) {
@@ -450,6 +456,14 @@ static int bch_writeback_thread(void *ar
 			cached_dev_put(dc);
 			SET_BDEV_STATE(&dc->sb, BDEV_STATE_CLEAN);
 			bch_write_bdev_super(dc, NULL);
+			/*
+			 * If bcache device is detaching via sysfs interface,
+			 * writeback thread should stop after there is no dirty
+			 * data on cache. BCACHE_DEV_DETACHING flag is set in
+			 * bch_cached_dev_detach().
+			 */
+			if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags))
+				break;
 		}
 
 		up_write(&dc->writeback_lock);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 144/185] ACPICA: Events: add a return on failure from acpi_hw_register_read
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (132 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 143/185] bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 145/185] ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c Greg Kroah-Hartman
                   ` (41 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Erik Schmauss, Rafael J. Wysocki,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erik Schmauss <erik.schmauss@intel.com>

[ Upstream commit b4c0de312613ca676db5bd7e696a44b56795612a ]

This ensures that acpi_ev_fixed_event_detect() does not use fixed_status
and and fixed_enable as uninitialized variables.

Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/acpica/evevent.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -204,6 +204,7 @@ u32 acpi_ev_fixed_event_detect(void)
 	u32 fixed_status;
 	u32 fixed_enable;
 	u32 i;
+	acpi_status status;
 
 	ACPI_FUNCTION_NAME(ev_fixed_event_detect);
 
@@ -211,8 +212,12 @@ u32 acpi_ev_fixed_event_detect(void)
 	 * Read the fixed feature status and enable registers, as all the cases
 	 * depend on their values. Ignore errors here.
 	 */
-	(void)acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status);
-	(void)acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable);
+	status = acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status);
+	status |=
+	    acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable);
+	if (ACPI_FAILURE(status)) {
+		return (int_status);
+	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
 			  "Fixed Event Block: Enable %08X Status %08X\n",

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 145/185] ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (133 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 144/185] ACPICA: Events: add a return on failure from acpi_hw_register_read Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 146/185] i2c: mv64xxx: Apply errata delay only in standard mode Greg Kroah-Hartman
                   ` (40 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Seunghun Han, Erik Schmauss,
	Rafael J. Wysocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seunghun Han <kkamagui@gmail.com>

[ Upstream commit 97f3c0a4b0579b646b6b10ae5a3d59f0441cc12c ]

I found an ACPI cache leak in ACPI early termination and boot continuing case.

When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.

Boot log of ACPI operand cache leak is as follows:
>[    0.464168] ACPI: Added _OSI(Module Device)
>[    0.467022] ACPI: Added _OSI(Processor Device)
>[    0.469376] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.471647] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.477997] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174)
>[    0.482706] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461)
>[    0.487503] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543)
>[    0.492136] ACPI Error: Method parse/execution failed [\_SB._INI] (Node ffff88021710a618), AE_AML_INTERNAL (20170303/psparse-543)
>[    0.497683] ACPI: Interpreter enabled
>[    0.499385] ACPI: (supports S0)
>[    0.501151] ACPI: Using IOAPIC for interrupt routing
>[    0.503342] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174)
>[    0.506522] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461)
>[    0.510463] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543)
>[    0.514477] ACPI Error: Method parse/execution failed [\_PIC] (Node ffff88021710ab18), AE_AML_INTERNAL (20170303/psparse-543)
>[    0.518867] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20170303/bus-991)
>[    0.522384] kmem_cache_destroy Acpi-Operand: Slab cache still has objects
>[    0.524597] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26
>[    0.526795] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006
>[    0.529668] Call Trace:
>[    0.530811]  ? dump_stack+0x5c/0x81
>[    0.532240]  ? kmem_cache_destroy+0x1aa/0x1c0
>[    0.533905]  ? acpi_os_delete_cache+0xa/0x10
>[    0.535497]  ? acpi_ut_delete_caches+0x3f/0x7b
>[    0.537237]  ? acpi_terminate+0xa/0x14
>[    0.538701]  ? acpi_init+0x2af/0x34f
>[    0.540008]  ? acpi_sleep_proc_init+0x27/0x27
>[    0.541593]  ? do_one_initcall+0x4e/0x1a0
>[    0.543008]  ? kernel_init_freeable+0x19e/0x21f
>[    0.546202]  ? rest_init+0x80/0x80
>[    0.547513]  ? kernel_init+0xa/0x100
>[    0.548817]  ? ret_from_fork+0x25/0x30
>[    0.550587] vgaarb: loaded
>[    0.551716] EDAC MC: Ver: 3.0.0
>[    0.553744] PCI: Probing PCI hardware
>[    0.555038] PCI host bridge to bus 0000:00
> ... Continue to boot and log is omitted ...

I analyzed this memory leak in detail and found acpi_ns_evaluate() function
only removes Info->return_object in AE_CTRL_RETURN_VALUE case. But, when errors
occur, the status value is not AE_CTRL_RETURN_VALUE, and Info->return_object is
also not null. Therefore, this causes acpi operand memory leak.

This cache leak causes a security threat because an old kernel (<= 4.9) shows
memory locations of kernel functions in stack dump. Some malicious users
could use this information to neutralize kernel ASLR.

I made a patch to fix ACPI operand cache leak.

Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/acpica/nseval.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -308,6 +308,14 @@ acpi_status acpi_ns_evaluate(struct acpi
 		/* Map AE_CTRL_RETURN_VALUE to AE_OK, we are done with it */
 
 		status = AE_OK;
+	} else if (ACPI_FAILURE(status)) {
+
+		/* If return_object exists, delete it */
+
+		if (info->return_object) {
+			acpi_ut_remove_reference(info->return_object);
+			info->return_object = NULL;
+		}
 	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_NAMES,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 146/185] i2c: mv64xxx: Apply errata delay only in standard mode
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (134 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 145/185] ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 147/185] xhci: zero usb device slot_id member when disabling and freeing a xhci slot Greg Kroah-Hartman
                   ` (39 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wolfram Sang, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gregory CLEMENT <gregory.clement@bootlin.com>

[ Upstream commit 31184d8c6ea49ea0676d100cdd7e1f102ad025b5 ]

The errata FE-8471889 description has been updated. There is still a
timing violation for repeated start. But the errata now states that it
was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz)
there is no issue.

This patch limit the errata fix to the Standard mode.

It has been tesed successfully on the clearfog (Aramda 388 based board).

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-mv64xxx.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -783,12 +783,16 @@ mv64xxx_of_config(struct mv64xxx_i2c_dat
 	 */
 	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
 		drv_data->offload_enabled = true;
-		drv_data->errata_delay = true;
+		/* The delay is only needed in standard mode (100kHz) */
+		if (bus_freq <= 100000)
+			drv_data->errata_delay = true;
 	}
 
 	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
 		drv_data->offload_enabled = false;
-		drv_data->errata_delay = true;
+		/* The delay is only needed in standard mode (100kHz) */
+		if (bus_freq <= 100000)
+			drv_data->errata_delay = true;
 	}
 
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 147/185] xhci: zero usb device slot_id member when disabling and freeing a xhci slot
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (135 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 146/185] i2c: mv64xxx: Apply errata delay only in standard mode Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 148/185] MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset Greg Kroah-Hartman
                   ` (38 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mathias Nyman, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit a400efe455f7b61ac9a801ac8d0d01f8c8d82dd5 ]

set udev->slot_id to zero when disabling and freeing the xhci slot.
Prevents usb core from calling xhci with a stale slot id.

xHC controller may be reset during resume to recover from some error.
All slots are unusable as they are disabled and freed.
xhci driver starts slot enumeration again from 1 in the order they are
enabled. In the worst case a stale udev->slot_id for one device matches
a newly enabled slot_id for a different device, causing us to
perform a action on the wrong device.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mem.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -962,6 +962,8 @@ void xhci_free_virt_device(struct xhci_h
 	if (dev->out_ctx)
 		xhci_free_container_ctx(xhci, dev->out_ctx);
 
+	if (dev->udev && dev->udev->slot_id)
+		dev->udev->slot_id = 0;
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = NULL;
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 148/185] MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (136 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 147/185] xhci: zero usb device slot_id member when disabling and freeing a xhci slot Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 149/185] PCI: Restore config space on runtime resume despite being unbound Greg Kroah-Hartman
                   ` (37 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mathias Kresin, Ralf Baechle,
	linux-mips, James Hogan, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Kresin <dev@kresin.me>

[ Upstream commit 05454c1bde91fb013c0431801001da82947e6b5a ]

According to the QCA u-boot source the "PCIE Phase Lock Loop
Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
QCA955X and QCA956X at offset 0x10.

Since the PCIE PLL config register is only defined for the AR724x fix
only this value. The value is wrong since the day it was added and isn't
used by any driver yet.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16048/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/mips/include/asm/mach-ath79/ar71xx_regs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -167,7 +167,7 @@
 #define AR71XX_AHB_DIV_MASK		0x7
 
 #define AR724X_PLL_REG_CPU_CONFIG	0x00
-#define AR724X_PLL_REG_PCIE_CONFIG	0x18
+#define AR724X_PLL_REG_PCIE_CONFIG	0x10
 
 #define AR724X_PLL_DIV_SHIFT		0
 #define AR724X_PLL_DIV_MASK		0x3ff

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 149/185] PCI: Restore config space on runtime resume despite being unbound
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (137 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 148/185] MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 150/185] usb: dwc2: Fix interval type issue Greg Kroah-Hartman
                   ` (36 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Bjorn Helgaas, Rafael J. Wysocki,
	Lukas Wunner, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rjw@rjwysocki.net>

[ Upstream commit 5775b843a619b3c93f946e2b55a208d9f0f48b59 ]

We leave PCI devices not bound to a driver in D0 during runtime suspend.
But they may have a parent which is bound and can be transitioned to
D3cold at runtime.  Once the parent goes to D3cold, the unbound child
may go to D3cold as well.  When the child goes to D3cold, its internal
state, including configuration of BARs, MSI, ASPM, MPS, etc., is lost.

One example are recent hybrid graphics laptops which cut power to the
discrete GPU when the root port above it goes to ACPI power state D3.
Users may provoke this by unbinding the GPU driver and allowing runtime
PM on the GPU via sysfs:  The PM core will then treat the GPU as
"suspended", which in turn allows the root port to runtime suspend,
causing the power resources listed in its _PR3 object to be powered off.
The GPU's BARs will be uninitialized when a driver later probes it.

Another example are hybrid graphics laptops where the GPU itself (rather
than the root port) is capable of runtime suspending to D3cold.  If the
GPU's integrated HDA controller is not bound and the GPU's driver
decides to runtime suspend to D3cold, the HDA controller's BARs will be
uninitialized when a driver later probes it.

Fix by saving and restoring config space over a runtime suspend cycle
even if the device is not bound.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>              # Nvidia Optimus
Tested-by: Lukas Wunner <lukas@wunner.de>              # MacBook Pro
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[lukas: add commit message, bikeshed code comments for clarity]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/92fb6e6ae2730915eb733c08e2f76c6a313e3860.1520068884.git.lukas@wunner.de
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci-driver.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1120,11 +1120,14 @@ static int pci_pm_runtime_suspend(struct
 	int error;
 
 	/*
-	 * If pci_dev->driver is not set (unbound), the device should
-	 * always remain in D0 regardless of the runtime PM status
+	 * If pci_dev->driver is not set (unbound), we leave the device in D0,
+	 * but it may go to D3cold when the bridge above it runtime suspends.
+	 * Save its config space in case that happens.
 	 */
-	if (!pci_dev->driver)
+	if (!pci_dev->driver) {
+		pci_save_state(pci_dev);
 		return 0;
+	}
 
 	if (!pm || !pm->runtime_suspend)
 		return -ENOSYS;
@@ -1163,16 +1166,18 @@ static int pci_pm_runtime_resume(struct
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	/*
-	 * If pci_dev->driver is not set (unbound), the device should
-	 * always remain in D0 regardless of the runtime PM status
+	 * Restoring config space is necessary even if the device is not bound
+	 * to a driver because although we left it in D0, it may have gone to
+	 * D3cold when the bridge above it runtime suspended.
 	 */
+	pci_restore_standard_config(pci_dev);
+
 	if (!pci_dev->driver)
 		return 0;
 
 	if (!pm || !pm->runtime_resume)
 		return -ENOSYS;
 
-	pci_restore_standard_config(pci_dev);
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 	__pci_enable_wake(pci_dev, PCI_D0, true, false);
 	pci_fixup_device(pci_fixup_resume, pci_dev);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 150/185] usb: dwc2: Fix interval type issue
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (138 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 149/185] PCI: Restore config space on runtime resume despite being unbound Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 151/185] usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS Greg Kroah-Hartman
                   ` (35 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Grigor Tovmasyan, Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grigor Tovmasyan <Grigor.Tovmasyan@synopsys.com>

[ Upstream commit 12814a3f8f9b247531d7863170cc82b3fe4218fd ]

The maximum value that unsigned char can hold is 255, meanwhile
the maximum value of interval is  2^(bIntervalMax-1)=2^15.

Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/core.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -144,7 +144,7 @@ struct s3c_hsotg_ep {
 	unsigned char           dir_in;
 	unsigned char           index;
 	unsigned char           mc;
-	unsigned char           interval;
+	u16                     interval;
 
 	unsigned int            halted:1;
 	unsigned int            periodic:1;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 151/185] usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (139 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 150/185] usb: dwc2: Fix interval type issue Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 153/185] perf/core: Fix perf_output_read_group() Greg Kroah-Hartman
                   ` (34 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Felipe Balbi,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 946ef68ad4e45aa048a5fb41ce8823ed29da866a ]

Some UDC drivers (like the DWC3) expect that the response to a setup()
request is queued from within the setup function itself so that it is
available as soon as setup() has completed.

Upon receiving a setup request the function fs driver creates an event that
is made available to userspace. And only once userspace has acknowledged
that event the response to the setup request is queued.

So it violates the requirement of those UDC drivers and random failures can
be observed. This is basically a race condition and if userspace is able to
read the event and queue the response fast enough all is good. But if it is
not, for example because other processes are currently scheduled to run,
the USB host that sent the setup request will observe an error.

To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS
return code. If a setup() callback returns this value the UDC driver is
aware that response is not yet available and can uses the appropriate
methods to handle this case.

Since in the case of function fs the response will never be available when
the setup() function returns make sure that this status code is used.

This fixed random occasional failures that were previously observed on a
DWC3 based system under high system load.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -2987,7 +2987,7 @@ static int ffs_func_setup(struct usb_fun
 	__ffs_event_add(ffs, FUNCTIONFS_SETUP);
 	spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags);
 
-	return 0;
+	return USB_GADGET_DELAYED_STATUS;
 }
 
 static void ffs_func_suspend(struct usb_function *f)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 153/185] perf/core: Fix perf_output_read_group()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (140 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 151/185] usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 154/185] hwmon: (pmbus/max8688) Accept negative page register values Greg Kroah-Hartman
                   ` (33 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Peter Zijlstra (Intel),
	Alexander Shishkin, Arnaldo Carvalho de Melo, Jiri Olsa,
	Linus Torvalds, Stephane Eranian, Thomas Gleixner, Vince Weaver,
	Ingo Molnar, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 9e5b127d6f33468143d90c8a45ca12410e4c3fa7 ]

Mark reported his arm64 perf fuzzer runs sometimes splat like:

  armv8pmu_read_counter+0x1e8/0x2d8
  armpmu_event_update+0x8c/0x188
  armpmu_read+0xc/0x18
  perf_output_read+0x550/0x11e8
  perf_event_read_event+0x1d0/0x248
  perf_event_exit_task+0x468/0xbb8
  do_exit+0x690/0x1310
  do_group_exit+0xd0/0x2b0
  get_signal+0x2e8/0x17a8
  do_signal+0x144/0x4f8
  do_notify_resume+0x148/0x1e8
  work_pending+0x8/0x14

which asserts that we only call pmu::read() on ACTIVE events.

The above callchain does:

  perf_event_exit_task()
    perf_event_exit_task_context()
      task_ctx_sched_out() // INACTIVE
      perf_event_exit_event()
        perf_event_set_state(EXIT) // EXIT
        sync_child_event()
          perf_event_read_event()
            perf_output_read()
              perf_output_read_group()
                leader->pmu->read()

Which results in doing a pmu::read() on an !ACTIVE event.

I _think_ this is 'new' since we added attr.inherit_stat, which added
the perf_event_read_event() to the exit path, without that
perf_event_read_output() would only trigger from samples and for
@event to trigger a sample, it's leader _must_ be ACTIVE too.

Still, adding this check makes it consistent with the @sub case for
the siblings.

Reported-and-Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -4878,7 +4878,8 @@ static void perf_output_read_group(struc
 	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
 		values[n++] = running;
 
-	if (leader != event)
+	if ((leader != event) &&
+	    (leader->state == PERF_EVENT_STATE_ACTIVE))
 		leader->pmu->read(leader);
 
 	values[n++] = perf_event_count(leader);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 154/185] hwmon: (pmbus/max8688) Accept negative page register values
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (141 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 153/185] perf/core: Fix perf_output_read_group() Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 155/185] hwmon: (pmbus/adm1275) " Greg Kroah-Hartman
                   ` (32 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit a46f8cd696624ef757be0311eb28f119c36778e8 ]

A negative page register value means that no page needs to be
selected. This is used by status register evaluations and needs
to be accepted.

Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/pmbus/max8688.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/pmbus/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -44,7 +44,7 @@ static int max8688_read_word_data(struct
 {
 	int ret;
 
-	if (page)
+	if (page > 0)
 		return -ENXIO;
 
 	switch (reg) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 155/185] hwmon: (pmbus/adm1275) Accept negative page register values
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (142 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 154/185] hwmon: (pmbus/max8688) Accept negative page register values Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 156/185] cdrom: do not call check_disk_change() inside cdrom_open() Greg Kroah-Hartman
                   ` (31 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Guenter Roeck, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit ecb29abd4cb0670c616fb563a078f25d777ce530 ]

A negative page register value means that no page needs to be
selected. This is used by status register read operations and needs
to be accepted. The failure to do so so results in missed status
and limit registers.

Fixes: da8e48ab483e1 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/pmbus/adm1275.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -67,7 +67,7 @@ static int adm1275_read_word_data(struct
 	const struct adm1275_data *data = to_adm1275_data(info);
 	int ret = 0;
 
-	if (page)
+	if (page > 0)
 		return -ENXIO;
 
 	switch (reg) {
@@ -144,7 +144,7 @@ static int adm1275_write_word_data(struc
 {
 	int ret;
 
-	if (page)
+	if (page > 0)
 		return -ENXIO;
 
 	switch (reg) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 156/185] cdrom: do not call check_disk_change() inside cdrom_open()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (143 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 155/185] hwmon: (pmbus/adm1275) " Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 157/185] usb: gadget: udc: change comparison to bitshift when dealing with a mask Greg Kroah-Hartman
                   ` (30 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maurizio Lombardi, Jens Axboe, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maurizio Lombardi <mlombard@redhat.com>

[ Upstream commit 2bbea6e117357d17842114c65e9a9cf2d13ae8a3 ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 #8 [ffff880078447da8] mount_bdev at ffffffff81202570
 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
#10 [ffff880078447e28] mount_fs at ffffffff81202d09
#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
#12 [ffff880078447ea8] do_mount at ffffffff81220fee
#13 [ffff880078447f28] sys_mount at ffffffff812218d6
#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 #5 [ffff8800784179e8] get_super at ffffffff81201cc7
 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 #7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
#16 [ffff880078417d00] do_last at ffffffff8120d53d
#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
#20 [ffff880078417f70] sys_open at ffffffff811fde4e
#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/paride/pcd.c |    2 ++
 drivers/cdrom/cdrom.c      |    3 ---
 drivers/cdrom/gdrom.c      |    3 +++
 drivers/ide/ide-cd.c       |    2 ++
 drivers/scsi/sr.c          |    2 ++
 5 files changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -229,6 +229,8 @@ static int pcd_block_open(struct block_d
 	struct pcd_unit *cd = bdev->bd_disk->private_data;
 	int ret;
 
+	check_disk_change(bdev);
+
 	mutex_lock(&pcd_mutex);
 	ret = cdrom_open(&cd->info, bdev, mode);
 	mutex_unlock(&pcd_mutex);
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -1153,9 +1153,6 @@ int cdrom_open(struct cdrom_device_info
 
 	cd_dbg(CD_OPEN, "entering cdrom_open\n");
 
-	/* open is event synchronization point, check events first */
-	check_disk_change(bdev);
-
 	/* if this was a O_NONBLOCK open and we should honor the flags,
 	 * do a quick open without drive/disc integrity checks. */
 	cdi->use_count++;
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -497,6 +497,9 @@ static struct cdrom_device_ops gdrom_ops
 static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
 {
 	int ret;
+
+	check_disk_change(bdev);
+
 	mutex_lock(&gdrom_mutex);
 	ret = cdrom_open(gd.cd_info, bdev, mode);
 	mutex_unlock(&gdrom_mutex);
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1593,6 +1593,8 @@ static int idecd_open(struct block_devic
 	struct cdrom_info *info;
 	int rc = -ENXIO;
 
+	check_disk_change(bdev);
+
 	mutex_lock(&ide_cd_mutex);
 	info = ide_cd_get(bdev->bd_disk);
 	if (!info)
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -522,6 +522,8 @@ static int sr_block_open(struct block_de
 	struct scsi_cd *cd;
 	int ret = -ENXIO;
 
+	check_disk_change(bdev);
+
 	mutex_lock(&sr_mutex);
 	cd = scsi_cd_get(bdev->bd_disk);
 	if (cd) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 157/185] usb: gadget: udc: change comparison to bitshift when dealing with a mask
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (144 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 156/185] cdrom: do not call check_disk_change() inside cdrom_open() Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 158/185] usb: gadget: composite: fix incorrect handling of OS desc requests Greg Kroah-Hartman
                   ` (29 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Wolfram Sang,
	Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit ac87e560f7c0f91b62012e9a159c0681a373b922 ]

Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/goku_udc.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/gadget/udc/goku_udc.h
+++ b/drivers/usb/gadget/udc/goku_udc.h
@@ -28,7 +28,7 @@ struct goku_udc_regs {
 #	define INT_EP1DATASET		0x00040
 #	define INT_EP2DATASET		0x00080
 #	define INT_EP3DATASET		0x00100
-#define INT_EPnNAK(n)		(0x00100 < (n))		/* 0 < n < 4 */
+#define INT_EPnNAK(n)		(0x00100 << (n))	/* 0 < n < 4 */
 #	define INT_EP1NAK		0x00200
 #	define INT_EP2NAK		0x00400
 #	define INT_EP3NAK		0x00800

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 158/185] usb: gadget: composite: fix incorrect handling of OS desc requests
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (145 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 157/185] usb: gadget: udc: change comparison to bitshift when dealing with a mask Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 159/185] ALSA: vmaster: Propagate slave error Greg Kroah-Hartman
                   ` (28 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chris Dickens, Felipe Balbi, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Dickens <christopher.a.dickens@gmail.com>

[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ]

When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.

When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.

Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/composite.c |   40 +++++++++++++++++++---------------------
 include/linux/usb/composite.h  |    3 +++
 2 files changed, 22 insertions(+), 21 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1279,7 +1279,7 @@ static int count_ext_compat(struct usb_c
 	return res;
 }
 
-static void fill_ext_compat(struct usb_configuration *c, u8 *buf)
+static int fill_ext_compat(struct usb_configuration *c, u8 *buf)
 {
 	int i, count;
 
@@ -1306,10 +1306,12 @@ static void fill_ext_compat(struct usb_c
 				buf += 23;
 			}
 			count += 24;
-			if (count >= 4096)
-				return;
+			if (count + 24 >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+				return count;
 		}
 	}
+
+	return count;
 }
 
 static int count_ext_prop(struct usb_configuration *c, int interface)
@@ -1354,25 +1356,20 @@ static int fill_ext_prop(struct usb_conf
 	struct usb_os_desc *d;
 	struct usb_os_desc_ext_prop *ext_prop;
 	int j, count, n, ret;
-	u8 *start = buf;
 
 	f = c->interface[interface];
+	count = 10; /* header length */
 	for (j = 0; j < f->os_desc_n; ++j) {
 		if (interface != f->os_desc_table[j].if_id)
 			continue;
 		d = f->os_desc_table[j].os_desc;
 		if (d)
 			list_for_each_entry(ext_prop, &d->ext_prop, entry) {
-				/* 4kB minus header length */
-				n = buf - start;
-				if (n >= 4086)
-					return 0;
-
-				count = ext_prop->data_len +
+				n = ext_prop->data_len +
 					ext_prop->name_len + 14;
-				if (count > 4086 - n)
-					return -EINVAL;
-				usb_ext_prop_put_size(buf, count);
+				if (count + n >= USB_COMP_EP0_OS_DESC_BUFSIZ)
+					return count;
+				usb_ext_prop_put_size(buf, n);
 				usb_ext_prop_put_type(buf, ext_prop->type);
 				ret = usb_ext_prop_put_name(buf, ext_prop->name,
 							    ext_prop->name_len);
@@ -1398,11 +1395,12 @@ static int fill_ext_prop(struct usb_conf
 				default:
 					return -EINVAL;
 				}
-				buf += count;
+				buf += n;
+				count += n;
 			}
 	}
 
-	return 0;
+	return count;
 }
 
 /*
@@ -1630,6 +1628,7 @@ unknown:
 			req->complete = composite_setup_complete;
 			buf = req->buf;
 			os_desc_cfg = cdev->os_desc_config;
+			w_length = min_t(u16, w_length, USB_COMP_EP0_OS_DESC_BUFSIZ);
 			memset(buf, 0, w_length);
 			buf[5] = 0x01;
 			switch (ctrl->bRequestType & USB_RECIP_MASK) {
@@ -1653,8 +1652,8 @@ unknown:
 					count += 16; /* header */
 					put_unaligned_le32(count, buf);
 					buf += 16;
-					fill_ext_compat(os_desc_cfg, buf);
-					value = w_length;
+					value = fill_ext_compat(os_desc_cfg, buf);
+					value = min_t(u16, w_length, value);
 				}
 				break;
 			case USB_RECIP_INTERFACE:
@@ -1683,8 +1682,7 @@ unknown:
 							      interface, buf);
 					if (value < 0)
 						return value;
-
-					value = w_length;
+					value = min_t(u16, w_length, value);
 				}
 				break;
 			}
@@ -1938,8 +1936,8 @@ int composite_os_desc_req_prepare(struct
 		goto end;
 	}
 
-	/* OS feature descriptor length <= 4kB */
-	cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL);
+	cdev->os_desc_req->buf = kmalloc(USB_COMP_EP0_OS_DESC_BUFSIZ,
+					 GFP_KERNEL);
 	if (!cdev->os_desc_req->buf) {
 		ret = PTR_ERR(cdev->os_desc_req->buf);
 		kfree(cdev->os_desc_req);
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -53,6 +53,9 @@
 /* big enough to hold our biggest descriptor */
 #define USB_COMP_EP0_BUFSIZ	1024
 
+/* OS feature descriptor length <= 4kB */
+#define USB_COMP_EP0_OS_DESC_BUFSIZ	4096
+
 #define USB_MS_TO_HS_INTERVAL(x)	(ilog2((x * 1000 / 125)) + 1)
 struct usb_configuration;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 159/185] ALSA: vmaster: Propagate slave error
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (146 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 158/185] usb: gadget: composite: fix incorrect handling of OS desc requests Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 160/185] media: cx23885: Override 888 ImpactVCBe crystal frequency Greg Kroah-Hartman
                   ` (27 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 2e2c177ca84aff092c3c96714b0f6a12900f3946 ]

In slave_update() of vmaster code ignores the error from the slave
get() callback and copies the values.  It's not only about the missing
error code but also that this may potentially lead to a leak of
uninitialized variables when the slave get() don't clear them.

This patch fixes slave_update() not to copy the potentially
uninitialized values when an error is returned from the slave get()
callback, and to propagate the error value properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/core/vmaster.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/sound/core/vmaster.c
+++ b/sound/core/vmaster.c
@@ -68,10 +68,13 @@ static int slave_update(struct link_slav
 		return -ENOMEM;
 	uctl->id = slave->slave.id;
 	err = slave->slave.get(&slave->slave, uctl);
+	if (err < 0)
+		goto error;
 	for (ch = 0; ch < slave->info.count; ch++)
 		slave->vals[ch] = uctl->value.integer.value[ch];
+ error:
 	kfree(uctl);
-	return 0;
+	return err < 0 ? err : 0;
 }
 
 /* get the slave ctl info and save the initial values */

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 160/185] media: cx23885: Override 888 ImpactVCBe crystal frequency
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (147 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 159/185] ALSA: vmaster: Propagate slave error Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 161/185] media: cx23885: Set subdev host data to clk_freq pointer Greg Kroah-Hartman
                   ` (26 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Brad Love, Mauro Carvalho Chehab,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 779c79d4b833ec646b0aed878da38edb45bbe156 ]

Hauppauge produced a revision of ImpactVCBe using an 888,
with a 25MHz crystal, instead of using the default third
overtone 50Mhz crystal. This overrides that frequency so
that the cx25840 is properly configured. Without the proper
crystal setup the cx25840 cannot load the firmware or
decode video.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx23885/cx23885-core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-core.c
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -870,6 +870,16 @@ static int cx23885_dev_setup(struct cx23
 	if (cx23885_boards[dev->board].clk_freq > 0)
 		dev->clk_freq = cx23885_boards[dev->board].clk_freq;
 
+	if (dev->board == CX23885_BOARD_HAUPPAUGE_IMPACTVCBE &&
+		dev->pci->subsystem_device == 0x7137) {
+		/* Hauppauge ImpactVCBe device ID 0x7137 is populated
+		 * with an 888, and a 25Mhz crystal, instead of the
+		 * usual third overtone 50Mhz. The default clock rate must
+		 * be overridden so the cx25840 is properly configured
+		 */
+		dev->clk_freq = 25000000;
+	}
+
 	dev->pci_bus  = dev->pci->bus->number;
 	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
 	cx23885_irq_add(dev, 0x001f00);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 161/185] media: cx23885: Set subdev host data to clk_freq pointer
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (148 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 160/185] media: cx23885: Override 888 ImpactVCBe crystal frequency Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 162/185] media: s3c-camif: fix out-of-bounds array access Greg Kroah-Hartman
                   ` (25 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Brad Love, Mauro Carvalho Chehab,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ]

Currently clk_freq is ignored entirely, because the cx235840 driver
configures the xtal at the chip defaults. This is an issue if a
board is produced with a non-default frequency crystal. If clk_freq
is not zero the cx25840 will attempt to use the setting provided,
or fall back to defaults otherwise.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx23885/cx23885-cards.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -1950,6 +1950,10 @@ void cx23885_card_setup(struct cx23885_d
 				&dev->i2c_bus[2].i2c_adap,
 				"cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840) {
+			/* set host data for clk_freq configuration */
+			v4l2_set_subdev_hostdata(dev->sd_cx25840,
+						&dev->clk_freq);
+
 			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
 			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
 		}

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 162/185] media: s3c-camif: fix out-of-bounds array access
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (149 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 161/185] media: cx23885: Set subdev host data to clk_freq pointer Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 163/185] dmaengine: pl330: fix a race condition in case of threaded irqs Greg Kroah-Hartman
                   ` (24 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arnd Bergmann, Laurent Pinchart,
	Sakari Ailus, Mauro Carvalho Chehab, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit a398e043637a4819a0e96467bfecaabf3224dd62 ]

While experimenting with older compiler versions, I ran
into a warning that no longer shows up on gcc-4.8 or newer:

drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format':
drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds

This is an off-by-one bug, leading to an access before the start of the
array, while newer compilers silently assume this undefined behavior
cannot happen and leave the loop at index 0 if no other entry matches.

As Sylvester explains, we actually need to ensure that the
value is within the range, so this reworks the loop to be
easier to parse correctly, and an additional check to fall
back on the first format value for any unexpected input.

I found an existing gcc bug for it and added a reduced version
of the function there.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3
Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/s3c-camif/camif-capture.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/media/platform/s3c-camif/camif-capture.c
+++ b/drivers/media/platform/s3c-camif/camif-capture.c
@@ -1280,16 +1280,17 @@ static void __camif_subdev_try_format(st
 {
 	const struct s3c_camif_variant *variant = camif->variant;
 	const struct vp_pix_limits *pix_lim;
-	int i = ARRAY_SIZE(camif_mbus_formats);
+	unsigned int i;
 
 	/* FIXME: constraints against codec or preview path ? */
 	pix_lim = &variant->vp_pix_limits[VP_CODEC];
 
-	while (i-- >= 0)
+	for (i = 0; i < ARRAY_SIZE(camif_mbus_formats); i++)
 		if (camif_mbus_formats[i] == mf->code)
 			break;
 
-	mf->code = camif_mbus_formats[i];
+	if (i == ARRAY_SIZE(camif_mbus_formats))
+		mf->code = camif_mbus_formats[0];
 
 	if (pad == CAMIF_SD_PAD_SINK) {
 		v4l_bound_align_image(&mf->width, 8, CAMIF_MAX_PIX_WIDTH,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 163/185] dmaengine: pl330: fix a race condition in case of threaded irqs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (150 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 162/185] media: s3c-camif: fix out-of-bounds array access Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 164/185] media: em28xx: USB bulk packet size fix Greg Kroah-Hartman
                   ` (23 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Frank Mori Hess, Qi Hou, Vinod Koul,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Qi Hou <qi.hou@windriver.com>

[ Upstream commit a3ca831249ca8c4c226e4ceafee04e280152e59d ]

When booting up with "threadirqs" in command line, all irq handlers of the DMA
controller pl330 will be threaded forcedly. These threads will race for the same
list, pl330->req_done.

Before the callback, the spinlock was released. And after it, the spinlock was
taken. This opened an race window where another threaded irq handler could steal
the spinlock and be permitted to delete entries of the list, pl330->req_done.

If the later deleted an entry that was still referred to by the former, there would
be a kernel panic when the former was scheduled and tried to get the next sibling
of the deleted entry.

The scenario could be depicted as below:

  Thread: T1  pl330->req_done  Thread: T2
      |             |              |
      |          -A-B-C-D-         |
    Locked          |              |
      |             |           Waiting
    Del A           |              |
      |          -B-C-D-           |
    Unlocked        |              |
      |             |           Locked
    Waiting         |              |
      |             |            Del B
      |             |              |
      |           -C-D-         Unlocked
    Waiting         |              |
      |
    Locked
      |
   get C via B
      \
       - Kernel panic

The kernel panic looked like as below:

Unable to handle kernel paging request at virtual address dead000000000108
pgd = ffffff8008c9e000
[dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2
Hardware name: Broadcom NS2 SVK (DT)
task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000
PC is at pl330_irq_handler+0x27c/0x390
LR is at pl330_irq_handler+0x2a8/0x390
pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5
sp : ffffffc1f5ce3d00
x29: ffffffc1f5ce3d00 x28: 0000000000000140
x27: ffffffc1f5c530b0 x26: dead000000000100
x25: dead000000000200 x24: 0000000000418958
x23: 0000000000000001 x22: ffffffc1f5ccd668
x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418
x19: dead000000000060 x18: 0000000000000001
x17: 0000000000000007 x16: 0000000000000001
x15: ffffffffffffffff x14: ffffffffffffffff
x13: ffffffffffffffff x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000000840
x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338
x7 : ffffff8008ce2020 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001
x3 : dead000000000200 x2 : dead000000000100
x1 : 0000000000000140 x0 : ffffffc1f5ccd590

Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020)
Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000)
3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600
3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998
3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000
3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0
3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001
3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8
3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00
3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000
3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68
3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80
3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648
3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00
3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90
3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0
3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000
3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8
Call trace:
Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60)
3b20:                                   dead000000000060 0000008000000000
3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88
3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4
3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc
3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000
3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140
3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000
3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000
3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff
3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007
[<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390
[<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88
[<ffffff80080f0d70>] irq_thread+0x140/0x200
[<ffffff80080bf4f8>] kthread+0xd8/0xf0
[<ffffff8008083690>] ret_from_fork+0x10/0x40
Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443)
---[ end trace f50005726d31199c ]---
Kernel panic - not syncing: Fatal exception in interrupt
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 0-1
Kernel Offset: disabled
Memory Limit: none
---[ end Kernel panic - not syncing: Fatal exception in interrupt

To fix this, re-start with the list-head after dropping the lock then
re-takeing it.

Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com>
Tested-by: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Qi Hou <qi.hou@windriver.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/pl330.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -1516,7 +1516,7 @@ static void pl330_dotask(unsigned long d
 /* Returns 1 if state was updated, 0 otherwise */
 static int pl330_update(struct pl330_dmac *pl330)
 {
-	struct dma_pl330_desc *descdone, *tmp;
+	struct dma_pl330_desc *descdone;
 	unsigned long flags;
 	void __iomem *regs;
 	u32 val;
@@ -1592,7 +1592,9 @@ static int pl330_update(struct pl330_dma
 	}
 
 	/* Now that we are in no hurry, do the callbacks */
-	list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
+	while (!list_empty(&pl330->req_done)) {
+		descdone = list_first_entry(&pl330->req_done,
+					    struct dma_pl330_desc, rqd);
 		list_del(&descdone->rqd);
 		spin_unlock_irqrestore(&pl330->lock, flags);
 		dma_pl330_rqcb(descdone, PL330_ERR_NONE);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 164/185] media: em28xx: USB bulk packet size fix
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (151 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 163/185] dmaengine: pl330: fix a race condition in case of threaded irqs Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 165/185] staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr Greg Kroah-Hartman
                   ` (22 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Brad Love, Michael Ira Krufky,
	Mauro Carvalho Chehab, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brad Love <brad@nextdimension.cc>

[ Upstream commit c7c7e8d7803406daa21e96d00c357de8b77b6764 ]

Hauppauge em28xx bulk devices exhibit continuity errors and corrupted
packets, when run in VMWare virtual machines. Unknown if other
manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected.

According to documentation the maximum packet multiplier for em28xx in bulk
transfer mode is 256 * 188 bytes. This changes the size of bulk transfers
to maximum supported value and have a bonus beneficial alignment.

Before:

After:

This sets up USB to expect just as many bytes as the em28xx is set to emit.

Successful usage under load afterwards natively and in both VMWare
and KVM/Qemu virtual machines.

Signed-off-by: Brad Love <brad@nextdimension.cc>
Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/usb/em28xx/em28xx.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/usb/em28xx/em28xx.h
+++ b/drivers/media/usb/em28xx/em28xx.h
@@ -183,7 +183,7 @@
    USB 2.0 spec says bulk packet size is always 512 bytes
  */
 #define EM28XX_BULK_PACKET_MULTIPLIER 384
-#define EM28XX_DVB_BULK_PACKET_MULTIPLIER 384
+#define EM28XX_DVB_BULK_PACKET_MULTIPLIER 94
 
 #define EM28XX_INTERLACED_DEFAULT 1
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 165/185] staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (152 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 164/185] media: em28xx: USB bulk packet size fix Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 166/185] rtc: tx4939: avoid unintended sign extension on a 24 bit shift Greg Kroah-Hartman
                   ` (21 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Colin Ian King, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit e1a7418529e33bc4efc346324557251a16a3e79b ]

Currently the allocation of priv->oldaddr is not null checked which will
lead to subsequent errors when accessing priv->oldaddr.  Fix this with
a null pointer check and a return of -ENOMEM on allocation failure.

Detected with Coccinelle:
drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test,
possible model on line 1723

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192u/r8192U_core.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1682,6 +1682,8 @@ static short rtl8192_usb_initendpoints(s
 
 		priv->rx_urb[16] = usb_alloc_urb(0, GFP_KERNEL);
 		priv->oldaddr = kmalloc(16, GFP_KERNEL);
+		if (!priv->oldaddr)
+			return -ENOMEM;
 		oldaddr = priv->oldaddr;
 		align = ((long)oldaddr) & 3;
 		if (align) {

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 166/185] rtc: tx4939: avoid unintended sign extension on a 24 bit shift
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (153 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 165/185] staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 167/185] serial: xuartps: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
                   ` (20 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Alexandre Belloni,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 347876ad47b9923ce26e686173bbf46581802ffa ]

The shifting of buf[5] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. If
the top bit of buf[5] is set then all then all the upper bits sec
end up as also being set because of the sign-extension. Fix this by
casting buf[5] to an unsigned long before the shift.

Detected by CoverityScan, CID#1465292 ("Unintended sign extension")

Fixes: 0e1492330cd2 ("rtc: add rtc-tx4939 driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-tx4939.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/rtc/rtc-tx4939.c
+++ b/drivers/rtc/rtc-tx4939.c
@@ -86,7 +86,8 @@ static int tx4939_rtc_read_time(struct d
 	for (i = 2; i < 6; i++)
 		buf[i] = __raw_readl(&rtcreg->dat);
 	spin_unlock_irq(&pdata->lock);
-	sec = (buf[5] << 24) | (buf[4] << 16) | (buf[3] << 8) | buf[2];
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
 	rtc_time_to_tm(sec, tm);
 	return rtc_valid_tm(tm);
 }
@@ -147,7 +148,8 @@ static int tx4939_rtc_read_alarm(struct
 	alrm->enabled = (ctl & TX4939_RTCCTL_ALME) ? 1 : 0;
 	alrm->pending = (ctl & TX4939_RTCCTL_ALMD) ? 1 : 0;
 	spin_unlock_irq(&pdata->lock);
-	sec = (buf[5] << 24) | (buf[4] << 16) | (buf[3] << 8) | buf[2];
+	sec = ((unsigned long)buf[5] << 24) | (buf[4] << 16) |
+		(buf[3] << 8) | buf[2];
 	rtc_time_to_tm(sec, &alrm->time);
 	return rtc_valid_tm(&alrm->time);
 }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 167/185] serial: xuartps: Fix out-of-bounds access through DT alias
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (154 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 166/185] rtc: tx4939: avoid unintended sign extension on a 24 bit shift Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 168/185] serial: samsung: Fix out-of-bounds access through serial port index Greg Kroah-Hartman
                   ` (19 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Michal Simek,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit e7d75e18d0fc3f7193b65282b651f980c778d935 ]

The cdns_uart_port[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: 928e9263492069ee ("tty: xuartps: Initialize ports according to aliases")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/xilinx_uartps.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1001,7 +1001,7 @@ static struct uart_port *cdns_uart_get_p
 	struct uart_port *port;
 
 	/* Try the given port id if failed use default method */
-	if (cdns_uart_port[id].mapbase != 0) {
+	if (id < CDNS_UART_NR_PORTS && cdns_uart_port[id].mapbase != 0) {
 		/* Find the next unused port */
 		for (id = 0; id < CDNS_UART_NR_PORTS; id++)
 			if (cdns_uart_port[id].mapbase == 0)

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 168/185] serial: samsung: Fix out-of-bounds access through serial port index
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (155 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 167/185] serial: xuartps: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 170/185] serial: fsl_lpuart: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
                   ` (18 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 49ee23b71877831ac087d6083f6f397dc19c9664 ]

The s3c24xx_serial_ports[] array is indexed using a value derived from
the "serialN" alias in DT, or from an incrementing probe index, which
may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using
a legitimate DTB or legitimate board code.

Fixes: 13a9f6c64fdc55eb ("serial: samsung: Consider DT alias when probing ports")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1288,6 +1288,10 @@ static int s3c24xx_serial_probe(struct p
 
 	dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index);
 
+	if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", index);
+		return -EINVAL;
+	}
 	ourport = &s3c24xx_serial_ports[index];
 
 	ourport->drv_data = s3c24xx_get_driver_data(pdev);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 170/185] serial: fsl_lpuart: Fix out-of-bounds access through DT alias
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (156 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 168/185] serial: samsung: Fix out-of-bounds access through serial port index Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 171/185] serial: arc_uart: " Greg Kroah-Hartman
                   ` (17 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit ffab87fdecc655cc676f8be8dd1a2c5e22bd6d47 ]

The lpuart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Fixes: c9e2e946fb0ba5d2 ("tty: serial: add Freescale lpuart driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/fsl_lpuart.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1791,6 +1791,10 @@ static int lpuart_probe(struct platform_
 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
 		return ret;
 	}
+	if (ret >= ARRAY_SIZE(lpuart_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", ret);
+		return -EINVAL;
+	}
 	sport->port.line = ret;
 	sport->lpuart32 = of_device_is_compatible(np, "fsl,ls1021a-lpuart");
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 171/185] serial: arc_uart: Fix out-of-bounds access through DT alias
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (157 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 170/185] serial: fsl_lpuart: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 172/185] PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 Greg Kroah-Hartman
                   ` (16 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit f9f5786987e81d166c60833edcb7d1836aa16944 ]

The arc_uart_ports[] array is indexed using a value derived from the
"serialN" alias in DT, which may lead to an out-of-bounds access.

Fix this by adding a range check.

Note that the array size is defined by a Kconfig symbol
(CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a
legitimate DTB.

Fixes: ea28fd56fcde69af ("serial/arc-uart: switch to devicetree based probing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/arc_uart.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -597,6 +597,11 @@ static int arc_serial_probe(struct platf
 	if (dev_id < 0)
 		dev_id = 0;
 
+	if (dev_id >= ARRAY_SIZE(arc_uart_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", dev_id);
+		return -EINVAL;
+	}
+
 	uart = &arc_uart_ports[dev_id];
 	port = &uart->port;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 172/185] PCI: Add function 1 DMA alias quirk for Marvell 88SE9220
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (158 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 171/185] serial: arc_uart: " Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 174/185] media: cx25821: prevent out-of-bounds read on array card Greg Kroah-Hartman
                   ` (15 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thomas Vincent-Cross, Bjorn Helgaas,
	Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Vincent-Cross <me@tvc.id.au>

[ Upstream commit 832e4e1f76b8a84991e9db56fdcef1ebce839b8b ]

Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3573,6 +3573,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
 			 quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220,
+			 quirk_dma_func1_alias);
 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
 			 quirk_dma_func1_alias);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 174/185] media: cx25821: prevent out-of-bounds read on array card
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (159 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 172/185] PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 175/185] clk: samsung: s3c2410: Fix PLL rates Greg Kroah-Hartman
                   ` (14 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Colin Ian King, Hans Verkuil,
	Mauro Carvalho Chehab, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 67300abdbe9f1717532aaf4e037222762716d0f6 ]

Currently an out of range dev->nr is detected by just reporting the
issue and later on an out-of-bounds read on array card occurs because
of this. Fix this by checking the upper range of dev->nr with the size
of array card (removes the hard coded size), move this check earlier
and also exit with the error -ENOSYS to avoid the later out-of-bounds
array read.

Detected by CoverityScan, CID#711191 ("Out-of-bounds-read")

Fixes: commit 02b20b0b4cde ("V4L/DVB (12730): Add conexant cx25821 driver")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[hans.verkuil@cisco.com: %ld -> %zd]
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/cx25821/cx25821-core.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/media/pci/cx25821/cx25821-core.c
+++ b/drivers/media/pci/cx25821/cx25821-core.c
@@ -871,6 +871,10 @@ static int cx25821_dev_setup(struct cx25
 	dev->nr = ++cx25821_devcount;
 	sprintf(dev->name, "cx25821[%d]", dev->nr);
 
+	if (dev->nr >= ARRAY_SIZE(card)) {
+		CX25821_INFO("dev->nr >= %zd", ARRAY_SIZE(card));
+		return -ENODEV;
+	}
 	if (dev->pci->device != 0x8210) {
 		pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
 			__func__, dev->pci->device);
@@ -887,9 +891,6 @@ static int cx25821_dev_setup(struct cx25
 		dev->channels[i].sram_channels = &cx25821_sram_channels[i];
 	}
 
-	if (dev->nr > 1)
-		CX25821_INFO("dev->nr > 1!");
-
 	/* board config */
 	dev->board = 1;		/* card[dev->nr]; */
 	dev->_max_num_decoders = MAX_DECODERS;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 175/185] clk: samsung: s3c2410: Fix PLL rates
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (160 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 174/185] media: cx25821: prevent out-of-bounds read on array card Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 176/185] clk: samsung: exynos5260: " Greg Kroah-Hartman
                   ` (13 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrzej Hajda, Tomasz Figa,
	Chanwoo Choi, Sylwester Nawrocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 179db533c08431f509a3823077549773d519358b ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-s3c2410.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/clk/samsung/clk-s3c2410.c
+++ b/drivers/clk/samsung/clk-s3c2410.c
@@ -170,7 +170,7 @@ static struct samsung_pll_rate_table pll
 	PLL_35XX_RATE(226000000, 105, 1, 1),
 	PLL_35XX_RATE(210000000, 132, 2, 1),
 	/* 2410 common */
-	PLL_35XX_RATE(203000000, 161, 3, 1),
+	PLL_35XX_RATE(202800000, 161, 3, 1),
 	PLL_35XX_RATE(192000000, 88, 1, 1),
 	PLL_35XX_RATE(186000000, 85, 1, 1),
 	PLL_35XX_RATE(180000000, 82, 1, 1),
@@ -180,18 +180,18 @@ static struct samsung_pll_rate_table pll
 	PLL_35XX_RATE(147000000, 90, 2, 1),
 	PLL_35XX_RATE(135000000, 82, 2, 1),
 	PLL_35XX_RATE(124000000, 116, 1, 2),
-	PLL_35XX_RATE(118000000, 150, 2, 2),
+	PLL_35XX_RATE(118500000, 150, 2, 2),
 	PLL_35XX_RATE(113000000, 105, 1, 2),
-	PLL_35XX_RATE(101000000, 127, 2, 2),
+	PLL_35XX_RATE(101250000, 127, 2, 2),
 	PLL_35XX_RATE(90000000, 112, 2, 2),
-	PLL_35XX_RATE(85000000, 105, 2, 2),
+	PLL_35XX_RATE(84750000, 105, 2, 2),
 	PLL_35XX_RATE(79000000, 71, 1, 2),
-	PLL_35XX_RATE(68000000, 82, 2, 2),
-	PLL_35XX_RATE(56000000, 142, 2, 3),
+	PLL_35XX_RATE(67500000, 82, 2, 2),
+	PLL_35XX_RATE(56250000, 142, 2, 3),
 	PLL_35XX_RATE(48000000, 120, 2, 3),
-	PLL_35XX_RATE(51000000, 161, 3, 3),
+	PLL_35XX_RATE(50700000, 161, 3, 3),
 	PLL_35XX_RATE(45000000, 82, 1, 3),
-	PLL_35XX_RATE(34000000, 82, 2, 3),
+	PLL_35XX_RATE(33750000, 82, 2, 3),
 	{ /* sentinel */ },
 };
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 176/185] clk: samsung: exynos5260: Fix PLL rates
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (161 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 175/185] clk: samsung: s3c2410: Fix PLL rates Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 177/185] clk: samsung: exynos5250: " Greg Kroah-Hartman
                   ` (12 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrzej Hajda, Tomasz Figa,
	Chanwoo Choi, Sylwester Nawrocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit cdb68fbd4e7962be742c4f29475220c5bf28d8a5 ]

Rates declared in PLL rate tables should match exactly rates calculated from
the PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos5260.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/samsung/clk-exynos5260.c
+++ b/drivers/clk/samsung/clk-exynos5260.c
@@ -102,7 +102,7 @@ static struct samsung_pll_rate_table pll
 	PLL_36XX_RATE(480000000, 160, 2, 2, 0),
 	PLL_36XX_RATE(432000000, 144, 2, 2, 0),
 	PLL_36XX_RATE(400000000, 200, 3, 2, 0),
-	PLL_36XX_RATE(394073130, 459, 7, 2, 49282),
+	PLL_36XX_RATE(394073128, 459, 7, 2, 49282),
 	PLL_36XX_RATE(333000000, 111, 2, 2, 0),
 	PLL_36XX_RATE(300000000, 100, 2, 2, 0),
 	PLL_36XX_RATE(266000000, 266, 3, 3, 0),

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 177/185] clk: samsung: exynos5250: Fix PLL rates
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (162 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 176/185] clk: samsung: exynos5260: " Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 178/185] clk: samsung: exynos3250: " Greg Kroah-Hartman
                   ` (11 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrzej Hajda, Chanwoo Choi,
	Tomasz Figa, Sylwester Nawrocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 2ac051eeabaa411ef89ae7cd5bb8e60cb41ad780 ]

Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos5250.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -700,13 +700,13 @@ static struct samsung_pll_rate_table epl
 	/* sorted in descending order */
 	/* PLL_36XX_RATE(rate, m, p, s, k) */
 	PLL_36XX_RATE(192000000, 64, 2, 2, 0),
-	PLL_36XX_RATE(180633600, 90, 3, 2, 20762),
+	PLL_36XX_RATE(180633605, 90, 3, 2, 20762),
 	PLL_36XX_RATE(180000000, 90, 3, 2, 0),
 	PLL_36XX_RATE(73728000, 98, 2, 4, 19923),
-	PLL_36XX_RATE(67737600, 90, 2, 4, 20762),
+	PLL_36XX_RATE(67737602, 90, 2, 4, 20762),
 	PLL_36XX_RATE(49152000, 98, 3, 4, 19923),
-	PLL_36XX_RATE(45158400, 90, 3, 4, 20762),
-	PLL_36XX_RATE(32768000, 131, 3, 5, 4719),
+	PLL_36XX_RATE(45158401, 90, 3, 4, 20762),
+	PLL_36XX_RATE(32768001, 131, 3, 5, 4719),
 	{ },
 };
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 178/185] clk: samsung: exynos3250: Fix PLL rates
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (163 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 177/185] clk: samsung: exynos5250: " Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 179/185] audit: return on memory error to avoid null pointer dereference Greg Kroah-Hartman
                   ` (10 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrzej Hajda, Chanwoo Choi,
	Tomasz Figa, Sylwester Nawrocki, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit a8321e7887410a2b2e80ab89d1ef7b30562658ea ]

Rates declared in PLL rate tables should match exactly rates calculated
from PLL coefficients. If that is not the case, rate of the PLL's child clock
might be set not as expected. For instance, if in the PLL rates table we have
a 393216000 Hz entry and the real value as returned by the PLL's recalc_rate
callback is 393216003, after setting PLL's clk rate to 393216000 clk_get_rate
will return 393216003. If we now attempt to set rate of a PLL's child divider
clock to 393216000/2 its rate will be 131072001, rather than 196608000.
That is, the divider will be set to 3 instead of 2, because 393216003/2 is
greater than 196608000.

To fix this issue declared rates are changed to exactly match rates generated
by the PLL, as calculated from the P, M, S, K coefficients.

In this patch an erroneous P value for 74176002 output frequency is also
corrected.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/samsung/clk-exynos3250.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/clk/samsung/clk-exynos3250.c
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -740,7 +740,7 @@ static struct samsung_pll_rate_table exy
 	PLL_36XX_RATE(144000000,  96, 2, 3,     0),
 	PLL_36XX_RATE( 96000000, 128, 2, 4,     0),
 	PLL_36XX_RATE( 84000000, 112, 2, 4,     0),
-	PLL_36XX_RATE( 80000004, 106, 2, 4, 43691),
+	PLL_36XX_RATE( 80000003, 106, 2, 4, 43691),
 	PLL_36XX_RATE( 73728000,  98, 2, 4, 19923),
 	PLL_36XX_RATE( 67737598, 270, 3, 5, 62285),
 	PLL_36XX_RATE( 65535999, 174, 2, 5, 49982),
@@ -776,7 +776,7 @@ static struct samsung_pll_rate_table exy
 	PLL_36XX_RATE(148352005,  98, 2, 3, 59070),
 	PLL_36XX_RATE(108000000, 144, 2, 4,     0),
 	PLL_36XX_RATE( 74250000,  99, 2, 4,     0),
-	PLL_36XX_RATE( 74176002,  98, 3, 4, 59070),
+	PLL_36XX_RATE( 74176002,  98, 2, 4, 59070),
 	PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
 	PLL_36XX_RATE( 54000000, 144, 2, 5,     0),
 	{ /* sentinel */ }

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 179/185] audit: return on memory error to avoid null pointer dereference
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (164 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 178/185] clk: samsung: exynos3250: " Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 180/185] netlabel: If PF_INET6, check sk_buff ip header version Greg Kroah-Hartman
                   ` (9 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Richard Guy Briggs, Paul Moore, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Guy Briggs <rgb@redhat.com>

[ Upstream commit 23138ead270045f1b3e912e667967b6094244999 ]

If there is a memory allocation error when trying to change an audit
kernel feature value, the ignored allocation error will trigger a NULL
pointer dereference oops on subsequent use of that pointer.  Return
instead.

Passes audit-testsuite.
See: https://github.com/linux-audit/audit-kernel/issues/76

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: not necessary (other funcs check for NULL), but a good practice]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/audit.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -738,6 +738,8 @@ static void audit_log_feature_change(int
 		return;
 
 	ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE);
+	if (!ab)
+		return;
 	audit_log_task_info(ab, current);
 	audit_log_format(ab, " feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
 			 audit_feature_names[which], !!old_feature, !!new_feature,

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 180/185] netlabel: If PF_INET6, check sk_buff ip header version
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (165 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 179/185] audit: return on memory error to avoid null pointer dereference Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 181/185] scsi: lpfc: Fix issue_lip if link is disabled Greg Kroah-Hartman
                   ` (8 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Richard Haines, Paul Moore, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Haines <richard_c_haines@btinternet.com>

[ Upstream commit 213d7f94775322ba44e0bbb55ec6946e9de88cea ]

When resolving a fallback label, check the sk_buff version as it
is possible (e.g. SCTP) to have family = PF_INET6 while
receiving ip_hdr(skb)->version = 4.

Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netlabel/netlabel_unlabeled.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1472,6 +1472,16 @@ int netlbl_unlabel_getattr(const struct
 		iface = rcu_dereference(netlbl_unlhsh_def);
 	if (iface == NULL || !iface->valid)
 		goto unlabel_getattr_nolabel;
+
+#if IS_ENABLED(CONFIG_IPV6)
+	/* When resolving a fallback label, check the sk_buff version as
+	 * it is possible (e.g. SCTP) to have family = PF_INET6 while
+	 * receiving ip_hdr(skb)->version = 4.
+	 */
+	if (family == PF_INET6 && ip_hdr(skb)->version == 4)
+		family = PF_INET;
+#endif /* IPv6 */
+
 	switch (family) {
 	case PF_INET: {
 		struct iphdr *hdr4;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 181/185] scsi: lpfc: Fix issue_lip if link is disabled
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (166 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 180/185] netlabel: If PF_INET6, check sk_buff ip header version Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 182/185] scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing Greg Kroah-Hartman
                   ` (7 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dick Kennedy, James Smart,
	Hannes Reinecke, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 2289e9598dde9705400559ca2606fb8c145c34f0 ]

The driver ignored checks on whether the link should be kept
administratively down after a link bounce. Correct the checks.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_attr.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -629,7 +629,12 @@ lpfc_issue_lip(struct Scsi_Host *shost)
 	LPFC_MBOXQ_t *pmboxq;
 	int mbxstatus = MBXERR_ERROR;
 
+	/*
+	 * If the link is offline, disabled or BLOCK_MGMT_IO
+	 * it doesn't make any sense to allow issue_lip
+	 */
 	if ((vport->fc_flag & FC_OFFLINE_MODE) ||
+	    (phba->hba_flag & LINK_DISABLED) ||
 	    (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
 		return -EPERM;
 

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 182/185] scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (167 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 181/185] scsi: lpfc: Fix issue_lip if link is disabled Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 183/185] scsi: lpfc: Fix frequency of Release WQE CQEs Greg Kroah-Hartman
                   ` (6 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dick Kennedy, James Smart,
	Hannes Reinecke, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ]

During link bounce testing in a point-to-point topology, the host may
enter a soft lockup on the lpfc_worker thread:

    Call Trace:
     lpfc_work_done+0x1f3/0x1390 [lpfc]
     lpfc_do_work+0x16f/0x180 [lpfc]
     kthread+0xc7/0xe0
     ret_from_fork+0x3f/0x70

The driver was simultaneously setting a combination of flags that caused
lpfc_do_work()to effectively spin between slow path work and new event
data, causing the lockup.

Ensure in the typical wq completions, that new event data flags are set
if the slow path flag is running. The slow path will eventually
reschedule the wq handling.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -716,8 +716,9 @@ lpfc_work_done(struct lpfc_hba *phba)
 	    (phba->hba_flag & HBA_SP_QUEUE_EVT)) {
 		if (pring->flag & LPFC_STOP_IOCB_EVENT) {
 			pring->flag |= LPFC_DEFERRED_RING_EVENT;
-			/* Set the lpfc data pending flag */
-			set_bit(LPFC_DATA_READY, &phba->data_flags);
+			/* Preserve legacy behavior. */
+			if (!(phba->hba_flag & HBA_SP_QUEUE_EVT))
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
 		} else {
 			if (phba->link_state >= LPFC_LINK_UP) {
 				pring->flag &= ~LPFC_DEFERRED_RING_EVENT;

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 183/185] scsi: lpfc: Fix frequency of Release WQE CQEs
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (168 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 182/185] scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 184/185] regulator: of: Add a missing of_node_put() in an error handling path of of_regulator_match() Greg Kroah-Hartman
                   ` (5 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dick Kennedy, James Smart,
	Hannes Reinecke, Martin K. Petersen, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ]

The driver controls when the hardware sends completions that communicate
consumption of elements from the WQ. This is done by setting a WQEC bit
on a WQE.

The current driver sets it on every Nth WQE posting. However, the driver
isn't clearing the bit if the WQE is reused. Thus, if the queue depth
isn't evenly divisible by N, with enough time, it can be set on every
element, creating a lot of overhead and risking CQ full conditions.

Correct by clearing the bit when not setting it on an Nth element.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -115,6 +115,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, u
 	/* set consumption flag every once in a while */
 	if (!((q->host_index + 1) % q->entry_repost))
 		bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
+	else
+		bf_set(wqe_wqec, &wqe->generic.wqe_com, 0);
 	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
 		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
 	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 184/185] regulator: of: Add a missing of_node_put() in an error handling path of of_regulator_match()
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (169 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 183/185] scsi: lpfc: Fix frequency of Release WQE CQEs Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 10:03 ` [PATCH 3.18 185/185] kdb: make "mdr" command repeat Greg Kroah-Hartman
                   ` (4 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christophe JAILLET, Mark Brown, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ]

If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must
release the reference on the current 'child' node before returning.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/of_regulator.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -181,6 +181,7 @@ int of_regulator_match(struct device *de
 				dev_err(dev,
 					"failed to parse DT for regulator %s\n",
 					child->name);
+				of_node_put(child);
 				return -EINVAL;
 			}
 			match->of_node = of_node_get(child);

^ permalink raw reply	[flat|nested] 181+ messages in thread

* [PATCH 3.18 185/185] kdb: make "mdr" command repeat
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (170 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 184/185] regulator: of: Add a missing of_node_put() in an error handling path of of_regulator_match() Greg Kroah-Hartman
@ 2018-05-28 10:03 ` Greg Kroah-Hartman
  2018-05-28 15:43 ` [PATCH 3.18 000/185] 3.18.111-stable review Nathan Chancellor
                   ` (3 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-28 10:03 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Daniel Thompson,
	Jason Wessel, kgdb-bugreport, Sasha Levin

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ]

The "mdr" command should repeat (continue) when only Enter/Return
is pressed, so make it do so.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/debug/kdb/kdb_main.c |   27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -1524,6 +1524,7 @@ static int kdb_md(int argc, const char *
 	int symbolic = 0;
 	int valid = 0;
 	int phys = 0;
+	int raw = 0;
 
 	kdbgetintenv("MDCOUNT", &mdcount);
 	kdbgetintenv("RADIX", &radix);
@@ -1533,9 +1534,10 @@ static int kdb_md(int argc, const char *
 	repeat = mdcount * 16 / bytesperword;
 
 	if (strcmp(argv[0], "mdr") == 0) {
-		if (argc != 2)
+		if (argc == 2 || (argc == 0 && last_addr != 0))
+			valid = raw = 1;
+		else
 			return KDB_ARGCOUNT;
-		valid = 1;
 	} else if (isdigit(argv[0][2])) {
 		bytesperword = (int)(argv[0][2] - '0');
 		if (bytesperword == 0) {
@@ -1571,7 +1573,10 @@ static int kdb_md(int argc, const char *
 		radix = last_radix;
 		bytesperword = last_bytesperword;
 		repeat = last_repeat;
-		mdcount = ((repeat * bytesperword) + 15) / 16;
+		if (raw)
+			mdcount = repeat;
+		else
+			mdcount = ((repeat * bytesperword) + 15) / 16;
 	}
 
 	if (argc) {
@@ -1588,7 +1593,10 @@ static int kdb_md(int argc, const char *
 			diag = kdbgetularg(argv[nextarg], &val);
 			if (!diag) {
 				mdcount = (int) val;
-				repeat = mdcount * 16 / bytesperword;
+				if (raw)
+					repeat = mdcount;
+				else
+					repeat = mdcount * 16 / bytesperword;
 			}
 		}
 		if (argc >= nextarg+1) {
@@ -1598,8 +1606,15 @@ static int kdb_md(int argc, const char *
 		}
 	}
 
-	if (strcmp(argv[0], "mdr") == 0)
-		return kdb_mdr(addr, mdcount);
+	if (strcmp(argv[0], "mdr") == 0) {
+		int ret;
+		last_addr = addr;
+		ret = kdb_mdr(addr, mdcount);
+		last_addr += mdcount;
+		last_repeat = mdcount;
+		last_bytesperword = bytesperword; // to make REPEAT happy
+		return ret;
+	}
 
 	switch (radix) {
 	case 10:

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 000/185] 3.18.111-stable review
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (171 preceding siblings ...)
  2018-05-28 10:03 ` [PATCH 3.18 185/185] kdb: make "mdr" command repeat Greg Kroah-Hartman
@ 2018-05-28 15:43 ` Nathan Chancellor
  2018-05-28 16:27 ` Harsh Shandilya
                   ` (2 subsequent siblings)
  175 siblings, 0 replies; 181+ messages in thread
From: Nathan Chancellor @ 2018-05-28 15:43 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

On Mon, May 28, 2018 at 12:00:41PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.111 release.
> There are 185 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 30 10:00:18 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.111-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled with -Werror, and installed onto my Pixel XL.

No issues noticed in general usage or dmesg.

Thanks!
Nathan

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 000/185] 3.18.111-stable review
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (172 preceding siblings ...)
  2018-05-28 15:43 ` [PATCH 3.18 000/185] 3.18.111-stable review Nathan Chancellor
@ 2018-05-28 16:27 ` Harsh Shandilya
  2018-05-29  7:08   ` Greg Kroah-Hartman
  2018-05-29  0:42 ` Guenter Roeck
  2018-05-29 19:53 ` Shuah Khan
  175 siblings, 1 reply; 181+ messages in thread
From: Harsh Shandilya @ 2018-05-28 16:27 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
	lkft-triage, stable

On 28 May 2018 3:30:41 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>This is the start of the stable review cycle for the 3.18.111 release.
>There are 185 patches in this series, all will be posted as a response
>to this one.  If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Wed May 30 10:00:18 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
>	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.111-rc1.gz
>or in the git tree and branch at:
>	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-3.18.y
>and the diffstat can be found below.

Merged and flashed onto the OnePlus 3T, no regressions noticed so far. Thanks for the update!
-- 
Harsh Shandilya, PRJKT Development LLC

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 000/185] 3.18.111-stable review
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (173 preceding siblings ...)
  2018-05-28 16:27 ` Harsh Shandilya
@ 2018-05-29  0:42 ` Guenter Roeck
  2018-05-29 19:53 ` Shuah Khan
  175 siblings, 0 replies; 181+ messages in thread
From: Guenter Roeck @ 2018-05-29  0:42 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, shuah, patches, ben.hutchings, lkft-triage, stable

On 05/28/2018 03:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.111 release.
> There are 185 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 30 10:00:18 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 119 pass: 119 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 000/185] 3.18.111-stable review
  2018-05-28 16:27 ` Harsh Shandilya
@ 2018-05-29  7:08   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-29  7:08 UTC (permalink / raw)
  To: Harsh Shandilya
  Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

On Mon, May 28, 2018 at 09:57:25PM +0530, Harsh Shandilya wrote:
> On 28 May 2018 3:30:41 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >This is the start of the stable review cycle for the 3.18.111 release.
> >There are 185 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Wed May 30 10:00:18 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> >	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.111-rc1.gz
> >or in the git tree and branch at:
> >	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-3.18.y
> >and the diffstat can be found below.
> 
> Merged and flashed onto the OnePlus 3T, no regressions noticed so far. Thanks for the update!

Thanks for testing and letting me know.

greg k-h

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM
  2018-05-28 10:02 ` [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM Greg Kroah-Hartman
@ 2018-05-29 14:34   ` Rob Herring
  2018-05-29 17:36     ` Greg Kroah-Hartman
  2018-05-30  5:48     ` Michal Simek
  0 siblings, 2 replies; 181+ messages in thread
From: Rob Herring @ 2018-05-29 14:34 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linux-kernel, stable, Alvaro Gamez Machado, Michal Simek, Sasha Levin

On Mon, May 28, 2018 at 5:02 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> 3.18-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Rob Herring <robh@kernel.org>
>
> [ Upstream commit 101646a24a2f9cdb61d7732459fbf068a7bbb542 ]
>
> Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
> doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.

Unless Michal feels differently, I don't think this should go in
stable. The DT change that broke microblaze is only in 4.16 .

Rob

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM
  2018-05-29 14:34   ` Rob Herring
@ 2018-05-29 17:36     ` Greg Kroah-Hartman
  2018-05-30  5:48     ` Michal Simek
  1 sibling, 0 replies; 181+ messages in thread
From: Greg Kroah-Hartman @ 2018-05-29 17:36 UTC (permalink / raw)
  To: Rob Herring
  Cc: linux-kernel, stable, Alvaro Gamez Machado, Michal Simek, Sasha Levin

On Tue, May 29, 2018 at 09:34:33AM -0500, Rob Herring wrote:
> On Mon, May 28, 2018 at 5:02 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > 3.18-stable review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Rob Herring <robh@kernel.org>
> >
> > [ Upstream commit 101646a24a2f9cdb61d7732459fbf068a7bbb542 ]
> >
> > Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
> > doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.
> 
> Unless Michal feels differently, I don't think this should go in
> stable. The DT change that broke microblaze is only in 4.16 .

Ah, for some reason I thought it was older than that.

I agree, I'll go drop it from all of the queues now, thanks for the
review, much appreciated.

greg k-h

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 000/185] 3.18.111-stable review
  2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
                   ` (174 preceding siblings ...)
  2018-05-29  0:42 ` Guenter Roeck
@ 2018-05-29 19:53 ` Shuah Khan
  175 siblings, 0 replies; 181+ messages in thread
From: Shuah Khan @ 2018-05-29 19:53 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
	stable, Shuah Khan

On 05/28/2018 04:00 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.111 release.
> There are 185 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed May 30 10:00:18 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.111-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

^ permalink raw reply	[flat|nested] 181+ messages in thread

* Re: [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM
  2018-05-29 14:34   ` Rob Herring
  2018-05-29 17:36     ` Greg Kroah-Hartman
@ 2018-05-30  5:48     ` Michal Simek
  1 sibling, 0 replies; 181+ messages in thread
From: Michal Simek @ 2018-05-30  5:48 UTC (permalink / raw)
  To: Rob Herring, Greg Kroah-Hartman
  Cc: linux-kernel, stable, Alvaro Gamez Machado, Michal Simek, Sasha Levin

On 29.5.2018 16:34, Rob Herring wrote:
> On Mon, May 28, 2018 at 5:02 AM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
>> 3.18-stable review patch.  If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Rob Herring <robh@kernel.org>
>>
>> [ Upstream commit 101646a24a2f9cdb61d7732459fbf068a7bbb542 ]
>>
>> Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
>> doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.
> 
> Unless Michal feels differently, I don't think this should go in
> stable. The DT change that broke microblaze is only in 4.16 .

yes. It is not needed.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 181+ messages in thread

end of thread, other threads:[~2018-05-30  5:48 UTC | newest]

Thread overview: 181+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-28 10:00 [PATCH 3.18 000/185] 3.18.111-stable review Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 001/185] MIPS: ptrace: Expose FIR register through FP regset Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 002/185] MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 003/185] KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable" Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 004/185] affs_lookup(): close a race with affs_remove_link() Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 005/185] aio: fix io_destroy(2) vs. lookup_ioctx() race Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 007/185] libata: Blacklist some Sandisk SSDs for NCQ Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 008/185] xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 009/185] kernel/signal.c: avoid undefined behaviour in kill_something_info Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 010/185] firewire-ohci: work around oversized DMA reads on JMicron controllers Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 011/185] ASoC: au1x: Fix timeout tests in au1xac97c_ac97_read() Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 013/185] tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 014/185] PCI: Add function 1 DMA alias quirk for Marvell 9128 Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 015/185] tools lib traceevent: Fix get_field_str() for dynamic strings Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 016/185] dm thin: fix documentation relative to low water mark threshold Greg Kroah-Hartman
2018-05-28 10:00 ` [PATCH 3.18 017/185] nfs: Do not convert nfs_idmap_cache_timeout to jiffies Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 019/185] kconfig: Dont leak main menus during parsing Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 020/185] kconfig: Fix automatic menu creation mem leak Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 021/185] kconfig: Fix expr_free() E_NOT leak Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 022/185] btrfs: Fix out of bounds access in btrfs_search_slot Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 023/185] scsi: fas216: fix sense buffer initialization Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 024/185] HID: roccat: prevent an out of bounds read in kovaplus_profile_activated() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 025/185] jffs2: Fix use-after-free bug in jffs2_iget()s error handling path Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 026/185] RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 027/185] ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 028/185] ocfs2/acl: use ip_xattr_sem to protect getting extended attribute Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 029/185] mm/mempolicy: fix the check of nodemask from user Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 030/185] mm/mempolicy: add nodes_empty check in SYSC_migrate_pages Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 031/185] asm-generic: provide generic_pmdp_establish() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 032/185] mm: pin address_space before dereferencing it while isolating an LRU page Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 033/185] IB/ipoib: Fix for potential no-carrier state Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 034/185] x86/power: Fix swsusp_arch_resume prototype Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 035/185] firmware: dmi_scan: Fix handling of empty DMI strings Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 036/185] ACPI: processor_perflib: Do not send _PPC change notification if not ready Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 037/185] MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 038/185] xen/grant-table: Use put_page instead of free_page Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 039/185] proc: fix /proc/*/map_files lookup Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 040/185] cifs: silence compiler warnings showing up with gcc-8.0.0 Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 041/185] bcache: properly set task state in bch_writeback_thread() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 043/185] bcache: fix for data collapse after re-attaching an attached device Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 044/185] bcache: return attach error when no cache set exist Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 045/185] irqchip/gic-v3: Change pr_debug message to pr_devel Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 046/185] scsi: ufs: Enable quirk to ignore sending WRITE_SAME command Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 047/185] scsi: bnx2fc: Fix check in SCSI completion handler for timed out request Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 048/185] scsi: sym53c8xx_2: iterator underflow in sym_getsync() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 049/185] scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 050/185] scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 051/185] usb: gadget: f_uac2: fix bFirstInterface in composite gadget Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 052/185] usb: gadget: fsl_udc_core: fix ep valid checks Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 054/185] scsi: aacraid: fix shutdown crash when init fails Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 055/185] scsi: qla4xxx: skip error recovery in case of register disconnect Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 056/185] ARM: OMAP3: Fix prm wake interrupt for resume Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 057/185] ARM: OMAP1: clock: Fix debugfs_create_*() usage Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 058/185] NFC: llcp: Limit size of SDP URI Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 059/185] mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 060/185] md raid10: fix NULL deference in handle_write_completed() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 061/185] drm/exynos: fix comparison to bitshift when dealing with a mask Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 062/185] drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 063/185] locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 064/185] kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 065/185] s390/cio: fix return code after missing interrupt Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 066/185] s390/cio: clear timer when terminating driver I/O Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 067/185] ARM: OMAP: Fix dmtimer init for omap1 Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 068/185] smsc75xx: fix smsc75xx_set_features() Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 069/185] regulatory: add NUL to request alpha2 Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 070/185] locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 071/185] x86/topology: Update the cpu cores field in /proc/cpuinfo correctly across CPU hotplug operations Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 072/185] media: dmxdev: fix error code for invalid ioctls Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 073/185] md/raid1: fix NULL pointer dereference Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 074/185] batman-adv: fix packet checksum in receive path Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 075/185] batman-adv: invalidate checksum on fragment reassembly Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 076/185] netfilter: ebtables: convert BUG_ONs to WARN_ONs Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 077/185] clocksource/drivers/fsl_ftm_timer: Fix error return checking Greg Kroah-Hartman
2018-05-28 10:01 ` [PATCH 3.18 078/185] r8152: fix tx packets accounting Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 079/185] bcache: fix kcrashes with fio in RAID5 backend dev Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 080/185] sit: fix IFLA_MTU ignored on NEWLINK Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 081/185] net/tcp/illinois: replace broken algorithm reference link Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 083/185] Btrfs: send, fix issuing write op when processing hole in no data mode Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 084/185] watchdog: f71808e_wdt: Fix magic close handling Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 085/185] e1000e: Fix check_for_link return value with autoneg off Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 086/185] e1000e: allocate ring descriptors with dma_zalloc_coherent Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 087/185] usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 088/185] scsi: sd: Keep disk read-only when re-reading partition Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 089/185] fbdev: Fixing arbitrary kernel leak in case FBIOGETCMAP_SPARC in sbusfb_ioctl_helper() Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 090/185] xen: xenbus: use put_device() instead of kfree() Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 091/185] USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 092/185] netfilter: ebtables: fix erroneous reject of last rule Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 093/185] microblaze: switch to NO_BOOTMEM Greg Kroah-Hartman
2018-05-29 14:34   ` Rob Herring
2018-05-29 17:36     ` Greg Kroah-Hartman
2018-05-30  5:48     ` Michal Simek
2018-05-28 10:02 ` [PATCH 3.18 094/185] net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 095/185] batman-adv: fix header size check in batadv_dbg_arp() Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 096/185] vti4: Dont count header length twice on tunnel setup Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 097/185] vti4: Dont override MTU passed on link creation via IFLA_MTU Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 098/185] mm/mempolicy.c: avoid use uninitialized preferred_node Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 099/185] selftests: ftrace: Add probe event argument syntax testcase Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 100/185] selftests: ftrace: Add a testcase for string type with kprobe_event Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 101/185] selftests: ftrace: Add a testcase for probepoint Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 104/185] net: qmi_wwan: add BroadMobi BM806U 2020:2033 Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 105/185] net-usb: add qmi_wwan if on lte modem wistron neweb d18q1 Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 106/185] llc: properly handle dev_queue_xmit() return value Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 107/185] net: Fix untag for vlan packets without ethernet header Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 108/185] net: mvneta: fix enable of all initialized RXQs Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 109/185] sh: fix debug trap failure to process signals before return to user Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 110/185] fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 111/185] swap: divide-by-zero when zero length swap file on ssd Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 112/185] sr: get/drop reference to device in revalidate and check_events Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 113/185] Force log to disk before reading the AGF during a fstrim Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 114/185] scsi: aacraid: Insure command thread is not recursively stopped Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 115/185] dp83640: Ensure against premature access to PHY registers after reset Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 116/185] mm/ksm: fix interaction with THP Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 117/185] mm: fix races between address_space dereference and free in page_evicatable Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 118/185] Btrfs: bail out on error during replay_dir_deletes Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 119/185] Btrfs: fix NULL pointer dereference in log_dir_items Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 120/185] btrfs: Fix possible softlock on single core machines Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 121/185] sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 124/185] btrfs: tests/qgroup: Fix wrong tree backref level Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 125/185] Btrfs: fix copy_items() return value when logging an inode Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 126/185] btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 127/185] xen/acpi: off by one in read_acpi_id() Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 128/185] ACPI: acpi_pad: Fix memory leak in power saving threads Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 129/185] powerpc/mpic: Check if cpu_possible() in mpic_physmask() Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 130/185] m68k: set dma and coherent masks for platform FEC ethernets Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 131/185] parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 132/185] hwmon: (nct6775) Fix writing pwmX_mode Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 133/185] powerpc/perf: Prevent kernel address leak to userspace via BHRB buffer Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 134/185] powerpc/perf: Fix kernel address leak via sampling registers Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 135/185] tools/thermal: tmon: fix for segfault Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 136/185] net/mlx5: Protect from command bit overflow Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 137/185] ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk) Greg Kroah-Hartman
2018-05-28 10:02 ` [PATCH 3.18 138/185] ima: Fallback to the builtin hash algorithm Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 139/185] virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 140/185] arm: dts: socfpga: fix GIC PPI warning Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 141/185] usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 142/185] zorro: Set up z->dev.dma_mask for the DMA API Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 143/185] bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 144/185] ACPICA: Events: add a return on failure from acpi_hw_register_read Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 145/185] ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 146/185] i2c: mv64xxx: Apply errata delay only in standard mode Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 147/185] xhci: zero usb device slot_id member when disabling and freeing a xhci slot Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 148/185] MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 149/185] PCI: Restore config space on runtime resume despite being unbound Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 150/185] usb: dwc2: Fix interval type issue Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 151/185] usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 153/185] perf/core: Fix perf_output_read_group() Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 154/185] hwmon: (pmbus/max8688) Accept negative page register values Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 155/185] hwmon: (pmbus/adm1275) " Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 156/185] cdrom: do not call check_disk_change() inside cdrom_open() Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 157/185] usb: gadget: udc: change comparison to bitshift when dealing with a mask Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 158/185] usb: gadget: composite: fix incorrect handling of OS desc requests Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 159/185] ALSA: vmaster: Propagate slave error Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 160/185] media: cx23885: Override 888 ImpactVCBe crystal frequency Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 161/185] media: cx23885: Set subdev host data to clk_freq pointer Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 162/185] media: s3c-camif: fix out-of-bounds array access Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 163/185] dmaengine: pl330: fix a race condition in case of threaded irqs Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 164/185] media: em28xx: USB bulk packet size fix Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 165/185] staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 166/185] rtc: tx4939: avoid unintended sign extension on a 24 bit shift Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 167/185] serial: xuartps: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 168/185] serial: samsung: Fix out-of-bounds access through serial port index Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 170/185] serial: fsl_lpuart: Fix out-of-bounds access through DT alias Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 171/185] serial: arc_uart: " Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 172/185] PCI: Add function 1 DMA alias quirk for Marvell 88SE9220 Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 174/185] media: cx25821: prevent out-of-bounds read on array card Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 175/185] clk: samsung: s3c2410: Fix PLL rates Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 176/185] clk: samsung: exynos5260: " Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 177/185] clk: samsung: exynos5250: " Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 178/185] clk: samsung: exynos3250: " Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 179/185] audit: return on memory error to avoid null pointer dereference Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 180/185] netlabel: If PF_INET6, check sk_buff ip header version Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 181/185] scsi: lpfc: Fix issue_lip if link is disabled Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 182/185] scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 183/185] scsi: lpfc: Fix frequency of Release WQE CQEs Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 184/185] regulator: of: Add a missing of_node_put() in an error handling path of of_regulator_match() Greg Kroah-Hartman
2018-05-28 10:03 ` [PATCH 3.18 185/185] kdb: make "mdr" command repeat Greg Kroah-Hartman
2018-05-28 15:43 ` [PATCH 3.18 000/185] 3.18.111-stable review Nathan Chancellor
2018-05-28 16:27 ` Harsh Shandilya
2018-05-29  7:08   ` Greg Kroah-Hartman
2018-05-29  0:42 ` Guenter Roeck
2018-05-29 19:53 ` Shuah Khan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).