LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: grygorii.strashko@ti.com, davem@davemloft.net, corbet@lwn.net,
	akpm@linux-foundation.org, netdev@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, vinicius.gomes@intel.com,
	henrik@austad.us, jesus.sanchez-palencia@intel.com,
	ilias.apalodimas@linaro.org, p-varis@ti.com, spatton@ti.com,
	francois.ozog@linaro.org, yogeshs@ti.com, nsekhar@ti.com
Subject: Re: [PATCH net-next 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload
Date: Tue, 12 Jun 2018 18:36:58 +0200	[thread overview]
Message-ID: <20180612163658.GC12251@lunn.ch> (raw)
In-Reply-To: <20180611133047.4818-4-ivan.khoronzhuk@linaro.org>

On Mon, Jun 11, 2018 at 04:30:44PM +0300, Ivan Khoronzhuk wrote:
> That's possible to offload vlan to tc priority mapping with
> assumption sk_prio == L2 prio.
> 
> Example:
> $ ethtool -L eth0 rx 1 tx 4
> 
> $ qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
> map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
> 
> $ tc -g class show dev eth0
> +---(100:ffe2) mqprio
> |    +---(100:3) mqprio
> |    +---(100:4) mqprio
> |    
> +---(100:ffe1) mqprio
> |    +---(100:2) mqprio
> |    
> +---(100:ffe0) mqprio
>      +---(100:1) mqprio
> 
> Here, 100:1 is txq0, 100:2 is txq1, 100:3 is txq2, 100:4 is txq3
> txq0 belongs to tc0, txq1 to tc1, txq2 and txq3 to tc2
> The offload part only maps L2 prio to classes of traffic, but not
> to transmit queues, so to direct traffic to traffic class vlan has
> to be created with appropriate egress map.
> 
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
> ---
>  drivers/net/ethernet/ti/cpsw.c | 82 ++++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 406537d74ec1..fd967d2bce5d 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -39,6 +39,7 @@
>  #include <linux/sys_soc.h>
>  
>  #include <linux/pinctrl/consumer.h>
> +#include <net/pkt_cls.h>
>  
>  #include "cpsw.h"
>  #include "cpsw_ale.h"
> @@ -153,6 +154,8 @@ do {								\
>  #define IRQ_NUM			2
>  #define CPSW_MAX_QUEUES		8
>  #define CPSW_CPDMA_DESCS_POOL_SIZE_DEFAULT 256
> +#define CPSW_TC_NUM			4
> +#define CPSW_FIFO_SHAPERS_NUM		(CPSW_TC_NUM - 1)
>  
>  #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT	29
>  #define CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK		GENMASK(2, 0)
> @@ -453,6 +456,7 @@ struct cpsw_priv {
>  	u8				mac_addr[ETH_ALEN];
>  	bool				rx_pause;
>  	bool				tx_pause;
> +	bool				mqprio_hw;
>  	u32 emac_port;
>  	struct cpsw_common *cpsw;
>  };
> @@ -1577,6 +1581,14 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_common *cpsw)
>  	soft_reset_slave(slave);
>  }
>  
> +static int cpsw_tc_to_fifo(int tc, int num_tc)
> +{
> +	if (tc == num_tc - 1)
> +		return 0;
> +
> +	return CPSW_FIFO_SHAPERS_NUM - tc;
> +}
> +
>  static int cpsw_ndo_open(struct net_device *ndev)
>  {
>  	struct cpsw_priv *priv = netdev_priv(ndev);
> @@ -2190,6 +2202,75 @@ static int cpsw_ndo_set_tx_maxrate(struct net_device *ndev, int queue, u32 rate)
>  	return ret;
>  }
>  
> +static int cpsw_set_tc(struct net_device *ndev, void *type_data)
> +{

Hi Ivan

Maybe this is not the best of names. What if you add support for
another TC qdisc? So you have another case in the switch statement
below?

Maybe call it cpsw_set_mqprio?

> +static int cpsw_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
> +			     void *type_data)
> +{
> +	switch (type) {
> +	case TC_SETUP_QDISC_MQPRIO:
> +		return cpsw_set_tc(ndev, type_data);
> +
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}

  Andrew
  

  reply	other threads:[~2018-06-12 16:37 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-11 13:30 [PATCH net-next 0/6] net: ethernet: ti: cpsw: add MQPRIO and CBS " Ivan Khoronzhuk
2018-06-11 13:30 ` [PATCH net-next 1/6] net: ethernet: ti: cpsw: use cpdma channels in backward order for txq Ivan Khoronzhuk
2018-06-11 13:30 ` [PATCH net-next 2/6] net: ethernet: ti: cpdma: fit rated channels in backward order Ivan Khoronzhuk
2018-06-11 13:30 ` [PATCH net-next 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload Ivan Khoronzhuk
2018-06-12 16:36   ` Andrew Lunn [this message]
2018-06-12 20:35     ` Ivan Khoronzhuk
2018-06-11 13:30 ` [PATCH net-next 4/6] net: ethernet: ti: cpsw: add CBS " Ivan Khoronzhuk
2018-06-12 10:18   ` Ilias Apalodimas
2018-06-11 13:30 ` [PATCH net-next 5/6] net: ethernet: ti: cpsw: restore shaper configuration while down/up Ivan Khoronzhuk
2018-06-11 13:30 ` [PATCH net-next 6/6] Documentation: networking: cpsw: add MQPRIO & CBS offload examples Ivan Khoronzhuk
2018-06-12 19:55   ` Grygorii Strashko
2018-06-12 20:36     ` Ivan Khoronzhuk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180612163658.GC12251@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=akpm@linux-foundation.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=francois.ozog@linaro.org \
    --cc=grygorii.strashko@ti.com \
    --cc=henrik@austad.us \
    --cc=ilias.apalodimas@linaro.org \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=jesus.sanchez-palencia@intel.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=p-varis@ti.com \
    --cc=spatton@ti.com \
    --cc=vinicius.gomes@intel.com \
    --cc=yogeshs@ti.com \
    --subject='Re: [PATCH net-next 3/6] net: ethernet: ti: cpsw: add MQPRIO Qdisc offload' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).