Re: [PATCH v10 4/7] i2c: fsi: Add abort and hardware reset procedures

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 803 bytes --]

Eddie,

> Thanks for the details. I have sent up a new series which will only do the
> bus reset if SDA is low. With our current hardware configuration, this

Thanks.

> *should* be sufficient to recover all the possible errors. However, there
> are configurations where it will not be enough, in which case getting the
> data line stuck high or clock line stuck either high or low can occur,
> necessitating the full reset. But since I can't demonstrate those at the
> moment, I can't argue to include that now :)

For the record, I am *really* interested in these cases. Just from
reading the above I wonder how SDA can stuck high when being open drain,
and how you will create 9 SCL pulses if SCL is stuck low. But if we have
a test case, we will figure out something together.

Thanks,

   Wolfram


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]