LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Russell King - ARM Linux <linux@armlinux.org.uk>
To: Peter Rosin <peda@axentia.se>
Cc: linux-kernel@vger.kernel.org, David Airlie <airlied@linux.ie>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Jyri Sarha <jsarha@ti.com>,
Daniel Vetter <daniel@ffwll.ch>,
Andrzej Hajda <a.hajda@samsung.com>,
Jacopo Mondi <jacopo+renesas@jmondi.org>
Subject: Re: [PATCH v5 7/7] drm/i2c: tda998x: register as a drm bridge
Date: Fri, 6 Jul 2018 14:36:37 +0100 [thread overview]
Message-ID: <20180706133637.GZ17271@n2100.armlinux.org.uk> (raw)
In-Reply-To: <20180523093122.27859-8-peda@axentia.se>
On Wed, May 23, 2018 at 11:31:22AM +0200, Peter Rosin wrote:
> This makes this driver work with all(?) drivers that are not
> componentized and instead expect to connect to a panel/bridge. That
> said, the only one tested is atmel-hlcdc.
>
> This hooks the relevant work function previously called by the encoder
> and the component also to the bridge, since the encoder goes away when
> connecting to the bridge interface of the driver and the equivalent of
> bind/unbind of the component is handled by bridge attach/detach.
>
> The lifetime requirements of a bridge and a component are slightly
> different, which is the reason for struct tda998x_bridge.
Why not do this conversion similarly to other "bridge" drivers that have
this same problem (eg, dw-hdmi, dw-mipi-dsi) and always create the
bridge device, but optionally create the encoder and bind the bridge
to the encoder?
That way we don't end up with the veneer functions for bridge-only vs
encoder-only, and we have just one control path to care about - that
being the bridge interface.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
> drivers/gpu/drm/i2c/tda998x_drv.c | 170 ++++++++++++++++++++++++++++++++------
> 1 file changed, 143 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index d401b3d0095c..d47e49c2991a 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -36,6 +36,14 @@ struct tda998x_audio_port {
> u8 config; /* AP value */
> };
>
> +struct tda998x_priv;
> +
> +struct tda998x_bridge {
> + struct tda998x_priv *priv;
> + struct device *dev;
> + struct drm_bridge bridge;
> +};
> +
> struct tda998x_priv {
> struct i2c_client *cec;
> struct i2c_client *hdmi;
> @@ -63,6 +71,8 @@ struct tda998x_priv {
> wait_queue_head_t edid_delay_waitq;
> bool edid_delay_active;
>
> + struct tda998x_bridge *bridge;
> + bool local_encoder;
> struct drm_encoder encoder;
> struct drm_connector connector;
>
> @@ -75,6 +85,9 @@ struct tda998x_priv {
> #define enc_to_tda998x_priv(x) \
> container_of(x, struct tda998x_priv, encoder)
>
> +#define bridge_to_tda998x_bridge(x) \
> + container_of(x, struct tda998x_bridge, bridge)
> +
> /* The TDA9988 series of devices use a paged register scheme.. to simplify
> * things we encode the page # in upper bits of the register #. To read/
> * write a given register, we need to make sure CURPAGE register is set
> @@ -842,7 +855,8 @@ static int tda998x_audio_hw_params(struct device *dev, void *data,
> struct hdmi_codec_daifmt *daifmt,
> struct hdmi_codec_params *params)
> {
> - struct tda998x_priv *priv = dev_get_drvdata(dev);
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> + struct tda998x_priv *priv = bridge->priv;
> int i, ret;
> struct tda998x_audio_params audio = {
> .sample_width = params->sample_width,
> @@ -899,7 +913,8 @@ static int tda998x_audio_hw_params(struct device *dev, void *data,
>
> static void tda998x_audio_shutdown(struct device *dev, void *data)
> {
> - struct tda998x_priv *priv = dev_get_drvdata(dev);
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> + struct tda998x_priv *priv = bridge->priv;
>
> mutex_lock(&priv->audio_mutex);
>
> @@ -912,7 +927,8 @@ static void tda998x_audio_shutdown(struct device *dev, void *data)
>
> int tda998x_audio_digital_mute(struct device *dev, void *data, bool enable)
> {
> - struct tda998x_priv *priv = dev_get_drvdata(dev);
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> + struct tda998x_priv *priv = bridge->priv;
>
> mutex_lock(&priv->audio_mutex);
>
> @@ -925,7 +941,8 @@ int tda998x_audio_digital_mute(struct device *dev, void *data, bool enable)
> static int tda998x_audio_get_eld(struct device *dev, void *data,
> uint8_t *buf, size_t len)
> {
> - struct tda998x_priv *priv = dev_get_drvdata(dev);
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> + struct tda998x_priv *priv = bridge->priv;
>
> mutex_lock(&priv->audio_mutex);
> memcpy(buf, priv->connector.eld,
> @@ -1126,7 +1143,10 @@ tda998x_connector_best_encoder(struct drm_connector *connector)
> {
> struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
>
> - return &priv->encoder;
> + if (priv->local_encoder)
> + return &priv->encoder;
> + else
> + return priv->bridge->bridge.encoder;
> }
>
> static
> @@ -1140,6 +1160,7 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
> struct drm_device *drm)
> {
> struct drm_connector *connector = &priv->connector;
> + struct drm_encoder *encoder;
> int ret;
>
> connector->interlace_allowed = 1;
> @@ -1156,7 +1177,8 @@ static int tda998x_connector_init(struct tda998x_priv *priv,
> if (ret)
> return ret;
>
> - drm_mode_connector_attach_encoder(&priv->connector, &priv->encoder);
> + encoder = tda998x_connector_best_encoder(&priv->connector);
> + drm_mode_connector_attach_encoder(&priv->connector, encoder);
>
> return 0;
> }
> @@ -1671,8 +1693,10 @@ static void tda998x_set_config(struct tda998x_priv *priv,
> priv->audio_params = p->audio_params;
> }
>
> -static int tda998x_init(struct device *dev, struct drm_device *drm)
> +static int tda998x_init(struct device *dev, struct drm_device *drm,
> + bool local_encoder)
> {
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> struct tda998x_encoder_params *params = dev->platform_data;
> struct i2c_client *client = to_i2c_client(dev);
> struct tda998x_priv *priv;
> @@ -1683,18 +1707,22 @@ static int tda998x_init(struct device *dev, struct drm_device *drm)
> if (!priv)
> return -ENOMEM;
>
> - dev_set_drvdata(dev, priv);
> + bridge->priv = priv;
> + priv->bridge = bridge;
> + priv->local_encoder = local_encoder;
>
> - if (dev->of_node)
> - crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
> + if (local_encoder) {
> + if (dev->of_node)
> + crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
>
> - /* If no CRTCs were found, fall back to our old behaviour */
> - if (crtcs == 0) {
> - dev_warn(dev, "Falling back to first CRTC\n");
> - crtcs = 1 << 0;
> - }
> + /* If no CRTCs were found, fall back to our old behaviour */
> + if (crtcs == 0) {
> + dev_warn(dev, "Falling back to first CRTC\n");
> + crtcs = 1 << 0;
> + }
>
> - priv->encoder.possible_crtcs = crtcs;
> + priv->encoder.possible_crtcs = crtcs;
> + }
>
> ret = tda998x_create(client, priv);
> if (ret)
> @@ -1703,11 +1731,15 @@ static int tda998x_init(struct device *dev, struct drm_device *drm)
> if (!dev->of_node && params)
> tda998x_set_config(priv, params);
>
> - drm_encoder_helper_add(&priv->encoder, &tda998x_encoder_helper_funcs);
> - ret = drm_encoder_init(drm, &priv->encoder, &tda998x_encoder_funcs,
> - DRM_MODE_ENCODER_TMDS, NULL);
> - if (ret)
> - goto err_encoder;
> + if (local_encoder) {
> + drm_encoder_helper_add(&priv->encoder,
> + &tda998x_encoder_helper_funcs);
> + ret = drm_encoder_init(drm, &priv->encoder,
> + &tda998x_encoder_funcs,
> + DRM_MODE_ENCODER_TMDS, NULL);
> + if (ret)
> + goto err_encoder;
> + }
>
> ret = tda998x_connector_init(priv, drm);
> if (ret)
> @@ -1716,7 +1748,8 @@ static int tda998x_init(struct device *dev, struct drm_device *drm)
> return 0;
>
> err_connector:
> - drm_encoder_cleanup(&priv->encoder);
> + if (local_encoder)
> + drm_encoder_cleanup(&priv->encoder);
> err_encoder:
> tda998x_destroy(priv);
> return ret;
> @@ -1724,10 +1757,12 @@ static int tda998x_init(struct device *dev, struct drm_device *drm)
>
> static void tda998x_fini(struct device *dev)
> {
> - struct tda998x_priv *priv = dev_get_drvdata(dev);
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> + struct tda998x_priv *priv = bridge->priv;
>
> drm_connector_cleanup(&priv->connector);
> - drm_encoder_cleanup(&priv->encoder);
> + if (priv->local_encoder)
> + drm_encoder_cleanup(&priv->encoder);
> tda998x_destroy(priv);
> }
>
> @@ -1735,7 +1770,7 @@ static int tda998x_bind(struct device *dev, struct device *master, void *data)
> {
> struct drm_device *drm = data;
>
> - return tda998x_init(dev, drm);
> + return tda998x_init(dev, drm, true);
> }
>
> static void tda998x_unbind(struct device *dev, struct device *master,
> @@ -1749,19 +1784,100 @@ static const struct component_ops tda998x_ops = {
> .unbind = tda998x_unbind,
> };
>
> +/* DRM bridge functions */
> +
> +static int tda998x_bridge_attach(struct drm_bridge *dbridge)
> +{
> + struct tda998x_bridge *bridge = bridge_to_tda998x_bridge(dbridge);
> + struct device *dev = bridge->dev;
> + struct drm_device *drm = bridge->bridge.dev;
> +
> + return tda998x_init(dev, drm, false);
> +}
> +
> +static void tda998x_bridge_detach(struct drm_bridge *dbridge)
> +{
> + struct tda998x_bridge *bridge = bridge_to_tda998x_bridge(dbridge);
> + struct device *dev = bridge->dev;
> +
> + tda998x_fini(dev);
> +}
> +
> +static void tda998x_bridge_enable(struct drm_bridge *dbridge)
> +{
> + struct tda998x_bridge *bridge = bridge_to_tda998x_bridge(dbridge);
> + struct tda998x_priv *priv = bridge->priv;
> +
> + tda998x_enable(priv);
> +}
> +
> +static void tda998x_bridge_disable(struct drm_bridge *dbridge)
> +{
> + struct tda998x_bridge *bridge = bridge_to_tda998x_bridge(dbridge);
> + struct tda998x_priv *priv = bridge->priv;
> +
> + tda998x_disable(priv);
> +}
> +
> +static void tda998x_bridge_mode_set(struct drm_bridge *dbridge,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct tda998x_bridge *bridge = bridge_to_tda998x_bridge(dbridge);
> + struct tda998x_priv *priv = bridge->priv;
> +
> + tda998x_mode_set(priv, mode, adjusted_mode);
> +}
> +
> +static const struct drm_bridge_funcs tda998x_bridge_funcs = {
> + .attach = tda998x_bridge_attach,
> + .detach = tda998x_bridge_detach,
> + .enable = tda998x_bridge_enable,
> + .disable = tda998x_bridge_disable,
> + .mode_set = tda998x_bridge_mode_set,
> +};
> +
> static int
> tda998x_probe(struct i2c_client *client, const struct i2c_device_id *id)
> {
> + struct device *dev = &client->dev;
> + struct tda998x_bridge *bridge;
> + int ret;
> +
> if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> dev_warn(&client->dev, "adapter does not support I2C\n");
> return -EIO;
> }
> - return component_add(&client->dev, &tda998x_ops);
> +
> + bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
> + if (!bridge)
> + return -ENOMEM;
> +
> + bridge->dev = dev;
> + dev_set_drvdata(dev, bridge);
> +
> + bridge->bridge.funcs = &tda998x_bridge_funcs;
> +#ifdef CONFIG_OF
> + bridge->bridge.of_node = dev->of_node;
> +#endif
> + drm_bridge_add(&bridge->bridge);
> +
> + ret = component_add(dev, &tda998x_ops);
> +
> + if (ret)
> + drm_bridge_remove(&bridge->bridge);
> +
> + return ret;
> }
>
> static int tda998x_remove(struct i2c_client *client)
> {
> - component_del(&client->dev, &tda998x_ops);
> + struct device *dev = &client->dev;
> + struct tda998x_bridge *bridge = dev_get_drvdata(dev);
> +
> + drm_bridge_remove(&bridge->bridge);
> + component_del(dev, &tda998x_ops);
> +
> return 0;
> }
>
> --
> 2.11.0
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up
next prev parent reply other threads:[~2018-07-06 13:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 9:31 [PATCH v5 0/7] Add tda998x (HDMI) support to atmel-hlcdc Peter Rosin
2018-05-23 9:31 ` [PATCH v5 1/7] dt-bindings: display: bridge: lvds-transmitter: add ti,ds90c185 Peter Rosin
2018-05-23 9:31 ` [PATCH v5 2/7] dt-bindings: display: atmel: optional video-interface of endpoints Peter Rosin
2018-05-23 9:31 ` [PATCH v5 3/7] drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodes Peter Rosin
2018-05-23 9:31 ` [PATCH v5 4/7] drm/i2c: tda998x: find the drm_device via the drm_connector Peter Rosin
2018-05-23 9:31 ` [PATCH v5 5/7] drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disable Peter Rosin
2018-07-06 10:57 ` Russell King - ARM Linux
2018-05-23 9:31 ` [PATCH v5 6/7] drm/i2c: tda998x: split encoder and component functions from the work Peter Rosin
2018-05-23 9:31 ` [PATCH v5 7/7] drm/i2c: tda998x: register as a drm bridge Peter Rosin
2018-07-06 13:36 ` Russell King - ARM Linux [this message]
2018-07-06 14:57 ` Russell King - ARM Linux
2018-07-06 14:58 ` [PATCH 1/6] drm/i2c: tda998x: find the drm_device via the drm_connector Russell King
2018-07-06 14:58 ` [PATCH 2/6] drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disable Russell King
2018-07-06 14:58 ` [PATCH 3/6] drm/i2c: tda998x: move tda998x_set_config() into tda998x_create() Russell King
2018-07-06 14:59 ` [PATCH 4/6] drm/i2c: tda998x: convert to bridge driver Russell King
2018-07-07 6:19 ` kbuild test robot
2018-07-07 7:08 ` kbuild test robot
2018-07-06 14:59 ` [PATCH 5/6] drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create() Russell King
2018-07-06 14:59 ` [PATCH 6/6] drm/i2c: tda998x: cleanup from previous changes Russell King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180706133637.GZ17271@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=alexandre.belloni@bootlin.com \
--cc=boris.brezillon@bootlin.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jacopo+renesas@jmondi.org \
--cc=jsarha@ti.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--subject='Re: [PATCH v5 7/7] drm/i2c: tda998x: register as a drm bridge' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).