LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Antoine Tenart <antoine.tenart@bootlin.com>
To: davem@davemloft.net
Cc: Antoine Tenart <antoine.tenart@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, maxime.chevallier@bootlin.com,
gregory.clement@bootlin.com, miquel.raynal@bootlin.com,
nadavh@marvell.com, stefanc@marvell.com, ymarkman@marvell.com,
mw@semihalf.com
Subject: [PATCH net-next 03/12] Documentation/bindings: net: marvell-pp2: update the IRQs description
Date: Wed, 19 Sep 2018 11:27:02 +0200 [thread overview]
Message-ID: <20180919092711.22296-4-antoine.tenart@bootlin.com> (raw)
In-Reply-To: <20180919092711.22296-1-antoine.tenart@bootlin.com>
This patch updates the interrupts part of the Marvell PPv2 driver
bindings documentation, to keep it in sync with the driver.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
.../devicetree/bindings/net/marvell-pp2.txt | 45 +++++++++++++------
1 file changed, 31 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
index fc019df0d863..b78397669320 100644
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt
@@ -31,7 +31,7 @@ required.
Required properties (port):
-- interrupts: interrupt for the port
+- interrupts: interrupt(s) for the port
- port-id: ID of the port from the MAC point of view
- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
GOP (Group Of Ports) point of view. This ID is used to index the
@@ -43,10 +43,12 @@ Optional properties (port):
- marvell,loopback: port is loopback mode
- phy: a phandle to a phy node defining the PHY address (as the reg
property, a single integer).
-- interrupt-names: if more than a single interrupt for rx is given, must
- be the name associated to the interrupts listed. Valid
- names are: "tx-cpu0", "tx-cpu1", "tx-cpu2", "tx-cpu3",
- "rx-shared", "link".
+- interrupt-names: if more than a single interrupt for is given, must be the
+ name associated to the interrupts listed. Valid names are:
+ "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+ "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+ for backward compatibility but shouldn't be used for new
+ additions.
- marvell,system-controller: a phandle to the system controller.
Example for marvell,armada-375-pp2:
@@ -89,9 +91,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <0>;
gop-port-id = <0>;
};
@@ -101,9 +108,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <1>;
gop-port-id = <2>;
};
@@ -113,9 +125,14 @@ cpm_ethernet: ethernet@0 {
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+ "hif5", "hif6", "hif7", "hif8", "link";
port-id = <2>;
gop-port-id = <3>;
};
--
2.17.1
next prev parent reply other threads:[~2018-09-19 9:30 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-19 9:26 [PATCH net-next 00/12] net: mvpp2: improve the interrupt usage Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 01/12] net: mvpp2: increase the number of s/w threads to 9 Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 02/12] net: mvpp2: rename the IRQs to match the hardware Antoine Tenart
2018-09-19 9:27 ` Antoine Tenart [this message]
2018-09-19 9:27 ` [PATCH net-next 04/12] net: mvpp2: do not update the queue mode while probing Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 05/12] net: mvpp2: fix the number of queues per cpu for PPv2.2 Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 06/12] net: mvpp2: cpu should always be unsigned Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 07/12] net: mvpp2: make the per-cpu helpers static Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 08/12] net: mvpp2: make mvpp2_read_relaxed static Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 09/12] net: mvpp2: do not use the CPU number to access the per-thread registers Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 10/12] net: mvpp2: map the CPUs to threads Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 11/12] net: mvpp2: handle cases where more CPUs are available than s/w threads Antoine Tenart
2018-10-29 17:35 ` Marc Zyngier
2018-10-30 13:53 ` Antoine Tenart
2018-09-19 9:27 ` [PATCH net-next 12/12] net: mvpp2: rename mvpp2_percpu function to mvpp2_thread Antoine Tenart
2018-09-20 4:13 ` [PATCH net-next 00/12] net: mvpp2: improve the interrupt usage David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180919092711.22296-4-antoine.tenart@bootlin.com \
--to=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@bootlin.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
--subject='Re: [PATCH net-next 03/12] Documentation/bindings: net: marvell-pp2: update the IRQs description' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).