LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Wolfram Sang <wsa@the-dreams.de>,
	Brendan Higgins <brendanhiggins@google.com>,
	Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Andrew Jeffery <andrew@aj.id.au>,
	linux-i2c@vger.kernel.org, openbmc@lists.ozlabs.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	James Feist <james.feist@linux.intel.com>,
	Vernon Mauery <vernon.mauery@linux.intel.com>,
	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
Date: Tue, 30 Oct 2018 14:09:16 -0700	[thread overview]
Message-ID: <20181030210917.32711-6-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20181030210917.32711-1-jae.hyun.yoo@linux.intel.com>

In multi-master environment, this driver's master cannot know
exactly when a peer master sends data to this driver's slave so a
case can be happened that this master tries to send data through
the master_xfer function but slave data from peer master is still
being processed by this driver.

To prevent any state corruption in the case, this patch adds
checking code if any slave operation is ongoing and it waits up to
the bus timeout duration before starting a master_xfer operation.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
---
 drivers/i2c/busses/i2c-aspeed.c | 55 ++++++++++++++++++++++++---------
 1 file changed, 40 insertions(+), 15 deletions(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 833b6b6a4c7e..30c3ab3a4844 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/completion.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/i2c.h>
@@ -115,6 +116,9 @@
 /* 0x18 : I2CD Slave Device Address Register   */
 #define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
 
+/* Busy checking */
+#define ASPEED_I2C_BUS_BUSY_CHECK_INTERVAL_US		(10 * 1000)
+
 enum aspeed_i2c_master_state {
 	ASPEED_I2C_MASTER_INACTIVE,
 	ASPEED_I2C_MASTER_START,
@@ -156,6 +160,8 @@ struct aspeed_i2c_bus {
 	int				cmd_err;
 	/* Protected only by i2c_lock_bus */
 	int				master_xfer_result;
+	/* Multi-master */
+	bool				multi_master;
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 	struct i2c_client		*slave;
 	enum aspeed_i2c_slave_state	slave_state;
@@ -596,27 +602,44 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 	return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
 }
 
+static int aspeed_i2c_check_bus_busy(struct aspeed_i2c_bus *bus)
+{
+	unsigned long timeout;
+
+	if (bus->multi_master) {
+		might_sleep();
+		/* Initialize it only when multi_master is set */
+		timeout = jiffies + bus->adap.timeout;
+	}
+
+	for (;;) {
+		if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+		      ASPEED_I2CD_BUS_BUSY_STS))
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+			if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
+#endif
+				return 0;
+		if (!bus->multi_master)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		usleep_range((ASPEED_I2C_BUS_BUSY_CHECK_INTERVAL_US >> 2) + 1,
+			     ASPEED_I2C_BUS_BUSY_CHECK_INTERVAL_US);
+	}
+
+	return aspeed_i2c_recover_bus(bus);
+}
+
 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
 				  struct i2c_msg *msgs, int num)
 {
 	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
 	unsigned long time_left, flags;
-	int ret = 0;
 
-	spin_lock_irqsave(&bus->lock, flags);
-	bus->cmd_err = 0;
-
-	/* If bus is busy, attempt recovery. We assume a single master
-	 * environment.
-	 */
-	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
-		spin_unlock_irqrestore(&bus->lock, flags);
-		ret = aspeed_i2c_recover_bus(bus);
-		if (ret)
-			return ret;
-		spin_lock_irqsave(&bus->lock, flags);
-	}
+	if (aspeed_i2c_check_bus_busy(bus))
+		return -EAGAIN;
 
+	spin_lock_irqsave(&bus->lock, flags);
 	bus->cmd_err = 0;
 	bus->msgs = msgs;
 	bus->msgs_index = 0;
@@ -827,7 +850,9 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
 	if (ret < 0)
 		return ret;
 
-	if (!of_property_read_bool(pdev->dev.of_node, "multi-master"))
+	if (of_property_read_bool(pdev->dev.of_node, "multi-master"))
+		bus->multi_master = true;
+	else
 		fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
 
 	/* Enable Master Mode */
-- 
2.19.1


  parent reply	other threads:[~2018-10-30 21:09 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-30 21:09 [PATCH i2c-next v9 0/5] " Jae Hyun Yoo
2018-10-30 21:09 ` [PATCH i2c-next v9 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional Jae Hyun Yoo
2018-11-28 21:54   ` Wolfram Sang
2018-11-28 22:36     ` Jae Hyun Yoo
2018-10-30 21:09 ` [PATCH i2c-next v9 2/5] i2c: core: Add support reading of 'bus-timeout-ms' and '#retries' properties Jae Hyun Yoo
2018-10-30 21:09 ` [PATCH i2c-next v9 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property Jae Hyun Yoo
2018-10-30 21:09 ` [PATCH i2c-next v9 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting Jae Hyun Yoo
2018-10-30 21:09 ` Jae Hyun Yoo [this message]
     [not found]   ` <201810310601.Odxb7qSY%fengguang.wu@intel.com>
2018-10-30 23:04     ` [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases Jae Hyun Yoo
2018-11-01 17:44   ` kbuild test robot
2018-11-01 18:09     ` Jae Hyun Yoo
2018-11-28 21:54   ` Wolfram Sang
2018-11-28 22:30     ` Jae Hyun Yoo
2019-01-15 22:47 ` [PATCH i2c-next v9 0/5] " Wolfram Sang
2019-01-15 23:32   ` Jae Hyun Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181030210917.32711-6-jae.hyun.yoo@linux.intel.com \
    --to=jae.hyun.yoo@linux.intel.com \
    --cc=andrew@aj.id.au \
    --cc=benh@kernel.crashing.org \
    --cc=brendanhiggins@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=james.feist@linux.intel.com \
    --cc=jarkko.nikula@linux.intel.com \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=vernon.mauery@linux.intel.com \
    --cc=wsa@the-dreams.de \
    --subject='Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).