LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Yauhen Kharuzhy <jekhor@gmail.com>
Cc: linux-kernel@vger.kernel.org,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Hans de Goede <hdegoede@redhat.com>
Subject: Re: [PATCH v2 2/2] extcon intel-cht-wc: Enable external charger
Date: Wed, 20 Feb 2019 15:08:53 +0200 [thread overview]
Message-ID: <20190220130853.GQ9224@smile.fi.intel.com> (raw)
In-Reply-To: <20190219212441.19391-3-jekhor@gmail.com>
On Wed, Feb 20, 2019 at 12:24:41AM +0300, Yauhen Kharuzhy wrote:
> In some configuration external charger "#charge enable" signal is
> connected to PMIC. Enable it at device probing to allow charging.
>
> Save CHGRCTRL0 and CHGDISCTR registers at driver probing and restore
> them at driver unbind to re-enable hardware charging control if it was
> enabled before.
>
> Tested at Lenovo Yoga Book (YB1-X91L).
My comments below.
After addressing them,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> +#define CHT_WC_CHGDISCTRL_OUTPUT BIT(0)
Simple _OUT as per documentation.
> +/* 0 - open drain, 1 - regular output */
Regular means push-pull.
> +#define CHT_WC_CHGDISCTRL_DRV_OD_DIS BIT(4)
_DRV as per documentation.
> +#define CHT_WC_CHGDISCTRL_MODE_HW BIT(6)
_FN as per documentation.
> +static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext,
> + bool enable)
> +{
> + unsigned int val;
> + int ret;
> +
> + val = enable ? 0 : CHT_WC_CHGDISCTRL_OUTPUT;
Can be assigned in definition block.
> + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
> + CHT_WC_CHGDISCTRL_OUTPUT, val);
> + if (ret)
> + dev_err(ext->dev, "Error updating CHGDISCTRL reg: %d\n", ret);
> +}
> + val = enable ? 0 : CHT_WC_CHGDISCTRL_MODE_HW;
> + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL,
> + CHT_WC_CHGDISCTRL_MODE_HW, val);
Indentation.
> + if (ret)
> + dev_err(ext->dev,
> + "Error setting sw control for charger enable: %d\n",
> + ret);
> +static int cht_wc_save_initial_state(struct cht_wc_extcon_data *ext)
> +{
> + int ret;
> +
> + /*
> + * Save the external charger control output state for restoring it at
> + * driver unbinding
You may move "at" to the next line and add a period at the end.
> + */
> + ret = regmap_read(ext->regmap, CHT_WC_CHGDISCTRL,
> + &ext->chgdisctrl_saved);
> + if (ret) {
> + dev_err(ext->dev, "Error reading CHGDISCTRL: %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = regmap_read(ext->regmap, CHT_WC_CHGRCTRL0,
> + &ext->chgrctrl0_saved);
> + if (ret) {
> + dev_err(ext->dev, "Error reading CHGRCTRL0: %d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
--
With Best Regards,
Andy Shevchenko
next prev parent reply other threads:[~2019-02-20 13:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 21:24 [PATCH v2 0/2] extcon: Intel Cherry Trail Whiskey Cove PMIC and external charger tweaks Yauhen Kharuzhy
2019-02-19 21:24 ` [PATCH v2 1/2] extcon-intel-cht-wc: Make charger detection co-existed with OTG host mode Yauhen Kharuzhy
2019-02-20 12:42 ` Andy Shevchenko
2019-02-20 20:46 ` Yauhen Kharuzhy
2019-02-19 21:24 ` [PATCH v2 2/2] extcon intel-cht-wc: Enable external charger Yauhen Kharuzhy
2019-02-20 13:08 ` Andy Shevchenko [this message]
2019-02-20 15:53 ` Hans de Goede
2019-02-20 21:24 ` Yauhen Kharuzhy
2019-02-22 9:18 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190220130853.GQ9224@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=jekhor@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--subject='Re: [PATCH v2 2/2] extcon intel-cht-wc: Enable external charger' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).