LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <lee.jones@linaro.org>, <rdunlap@infradead.org>,
	<linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Dan Murphy <dmurphy@ti.com>, Rob Herring <robh@kernel.org>
Subject: [PATCH v4 5/7] dt-bindings: ti-lmu: Modify dt bindings for the LM3697
Date: Mon, 6 May 2019 14:16:12 -0500	[thread overview]
Message-ID: <20190506191614.25051-6-dmurphy@ti.com> (raw)
In-Reply-To: <20190506191614.25051-1-dmurphy@ti.com>

The LM3697 is a single function LED driver. The single function LED
driver needs to reside in the LED directory as a dedicated LED driver
and not as a MFD device.  The device does have common brightness and ramp
features and those can be accomodated by a TI LMU framework.

The LM3697 dt binding needs to be moved from the ti-lmu.txt and a dedicated
LED dt binding needs to be added.  The new LM3697 LED dt binding will then
reside in the Documentation/devicetree/bindings/leds directory and follow the
current LED and general bindings guidelines.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v4 - Made assiciated ramp bindings changes and capitalization issue otherwise
no change - https://lore.kernel.org/patchwork/patch/1068618/

v3 - No changes added Reviewed-by Rob - https://lore.kernel.org/patchwork/patch/1058762/
v2 - Made changes to reference ti,brightness-resolution to the ti-lmu.txt -
https://lore.kernel.org/patchwork/patch/1054501/

 .../devicetree/bindings/leds/leds-lm3697.txt  | 73 +++++++++++++++++++
 .../devicetree/bindings/mfd/ti-lmu.txt        | 27 +------
 2 files changed, 74 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
new file mode 100644
index 000000000000..63992d732959
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -0,0 +1,73 @@
+* Texas Instruments - LM3697 Highly Efficient White LED Driver
+
+The LM3697 11-bit LED driver provides high-
+performance backlight dimming for 1, 2, or 3 series
+LED strings while delivering up to 90% efficiency.
+
+This device is suitable for display and keypad lighting
+
+Required properties:
+	- compatible:
+		"ti,lm3697"
+	- reg :  I2C slave address
+	- #address-cells : 1
+	- #size-cells : 0
+
+Optional properties:
+	- enable-gpios : GPIO pin to enable/disable the device
+	- vled-supply : LED supply
+
+Required child properties:
+	- reg : 0 - LED is Controlled by bank A
+		1 - LED is Controlled by bank B
+	- led-sources : Indicates which HVLED string is associated to which
+			control bank.  This is a zero based property so
+			HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
+			Additional information is contained
+			in Documentation/devicetree/bindings/leds/common.txt
+
+Optional child properties:
+	- ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+	- label : see Documentation/devicetree/bindings/leds/common.txt
+	- linux,default-trigger :
+	   see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+led-controller@36 {
+	compatible = "ti,lm3697";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x36>;
+
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+
+	led@0 {
+		reg = <0>;
+		led-sources = <0 2>;
+		ti,brightness-resolution = <2047>;
+		ramp-up-us = <5000>;
+		ramp-down-us = <1000>;
+		label = "white:first_backlight_cluster";
+		linux,default-trigger = "backlight";
+	};
+
+	led@1 {
+		reg = <1>;
+		led-sources = <1>;
+		ti,brightness-resolution = <255>;
+		ramp-up-us = <500>;
+		ramp-down-us = <1000>;
+		label = "white:second_backlight_cluster";
+		linux,default-trigger = "backlight";
+	};
+}
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lm3697.pdf
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index e3efefb194c5..782d3c9812ed 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -8,7 +8,6 @@ TI LMU driver supports lighting devices below.
   LM3632       Backlight and regulator
   LM3633       Backlight, LED and fault monitor
   LM3695       Backlight
-  LM3697       Backlight and fault monitor
 
 Required properties:
   - compatible: Should be one of:
@@ -16,11 +15,10 @@ Required properties:
                 "ti,lm3632"
                 "ti,lm3633"
                 "ti,lm3695"
-                "ti,lm3697"
   - reg: I2C slave address.
          0x11 for LM3632
          0x29 for LM3631
-         0x36 for LM3633, LM3697
+         0x36 for LM3633
          0x63 for LM3695
 
 Optional properties:
@@ -51,7 +49,6 @@ Optional nodes:
     Required properties:
       - compatible: Should be one of:
                     "ti,lm3633-fault-monitor"
-                    "ti,lm3697-fault-monitor"
   - leds: LED properties for LM3633. Please refer to [2].
   - regulators: Regulator properties for LM3631 and LM3632.
                 Please refer to [3].
@@ -216,25 +213,3 @@ lm3695@63 {
 		};
 	};
 };
-
-lm3697@36 {
-	compatible = "ti,lm3697";
-	reg = <0x36>;
-
-	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
-	backlight {
-		compatible = "ti,lm3697-backlight";
-
-		lcd {
-			ti,brightness-resolution = <255>;
-			led-sources = <0 1 2>;
-			ramp-up-us = <200000>;
-			ramp-down-us = <200000>;
-		};
-	};
-
-	fault-monitor {
-		compatible = "ti,lm3697-fault-monitor";
-	};
-};
-- 
2.21.0.5.gaeb582a983


  parent reply	other threads:[~2019-05-06 19:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 19:16 [PATCH v4 0/7] LMU Rework Dan Murphy
2019-05-06 19:16 ` [PATCH v4 1/7] dt-bindings: mfd: LMU: Fix lm3632 dt binding example Dan Murphy
2019-05-08 11:35   ` Lee Jones
2019-05-06 19:16 ` [PATCH v4 2/7] dt-bindings: mfd: LMU: Add the ramp up/down property Dan Murphy
2019-05-08 11:35   ` Lee Jones
2019-05-06 19:16 ` [PATCH v4 3/7] dt-bindings: mfd: LMU: Add ti,brightness-resolution Dan Murphy
2019-05-08 11:36   ` Lee Jones
2019-05-06 19:16 ` [PATCH v4 4/7] leds: TI LMU: Add common code for TI LMU devices Dan Murphy
2019-05-06 19:16 ` Dan Murphy [this message]
2019-05-08 11:36   ` [PATCH v4 5/7] dt-bindings: ti-lmu: Modify dt bindings for the LM3697 Lee Jones
2019-05-06 19:16 ` [PATCH v4 6/7] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2019-05-06 19:16 ` [PATCH v4 7/7] leds: lm3697: Introduce the lm3697 driver Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190506191614.25051-6-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=rdunlap@infradead.org \
    --cc=robh@kernel.org \
    --subject='Re: [PATCH v4 5/7] dt-bindings: ti-lmu: Modify dt bindings for the LM3697' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).