LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v6] iio: cros_ec: Add lid angle driver
@ 2019-04-25  0:29 Gwendal Grignou
  2019-04-27 13:21 ` Jonathan Cameron
  2019-05-08 10:48 ` Lee Jones
  0 siblings, 2 replies; 5+ messages in thread
From: Gwendal Grignou @ 2019-04-25  0:29 UTC (permalink / raw)
  To: enric.balletbo, bleung, groeck, lee.jones, jic23
  Cc: linux-iio, linux-kernel, Gwendal Grignou

Add a IIO driver that reports the angle between the lid and the base for
ChromeOS convertible device.

Tested on eve with ToT EC firmware.
Check driver is loaded and lid angle is correct.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
---
Changes in v6:
- Fix lock held in an error path error.

Changes in v5:
- Remove unnecessary define.
- v4 was the wrong patch file

Changes in v3:
- Use static channel array, simplify code because index is always 0.

Changes in v2:
- Fix license, remove driver_module field.

 drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
 drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
 .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++
 drivers/mfd/cros_ec_dev.c                     |  13 +-
 4 files changed, 159 insertions(+), 3 deletions(-)
 create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c

diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
index 135f6825903f..aacc2ab9c34f 100644
--- a/drivers/iio/common/cros_ec_sensors/Kconfig
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
 	  Accelerometers, Gyroscope and Magnetometer that are
 	  presented by the ChromeOS EC Sensor hub.
 	  Creates an IIO device for each functions.
+
+config IIO_CROS_EC_SENSORS_LID_ANGLE
+	tristate "ChromeOS EC Sensor for lid angle"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to report the angle between lid and base for some
+	  convertible devices.
+	  This module is loaded when the EC can calculate the angle between the base
+	  and the lid.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
index ec716ff2a775..a35ee232ac07 100644
--- a/drivers/iio/common/cros_ec_sensors/Makefile
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -4,3 +4,4 @@
 
 obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
 obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
new file mode 100644
index 000000000000..876dfd176b0e
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about counter sensors. Counters are presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "cros-ec-lid-angle"
+
+/*
+ * One channel for the lid angle, the other for timestamp.
+ */
+static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
+	{
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type.realbits = CROS_EC_SENSOR_BITS,
+		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
+		.scan_type.sign = 'u',
+		.type = IIO_ANGL
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_lid_angle_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+};
+
+static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
+					  unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
+	if (ret) {
+		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
+		return ret;
+	}
+
+	*data = st->resp->lid_angle.value;
+	return 0;
+}
+
+static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    int *val, int *val2, long mask)
+{
+	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
+	s16 data;
+	int ret;
+
+	mutex_lock(&st->core.cmd_lock);
+	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
+	if (ret == 0) {
+		*val = data;
+		ret = IIO_VAL_INT;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+	return ret;
+}
+
+static const struct iio_info cros_ec_lid_angle_info = {
+	.read_raw = &cros_ec_lid_angle_read,
+};
+
+static int cros_ec_lid_angle_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_lid_angle_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &cros_ec_lid_angle_info;
+	state = iio_priv(indio_dev);
+	indio_dev->channels = cros_ec_lid_angle_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
+
+	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+			cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct platform_device_id cros_ec_lid_angle_ids[] = {
+	{
+		.name = DRV_NAME,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
+
+static struct platform_driver cros_ec_lid_angle_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+		.pm	= &cros_ec_sensors_pm_ops,
+	},
+	.probe		= cros_ec_lid_angle_probe,
+	.id_table	= cros_ec_lid_angle_ids,
+};
+module_platform_driver(cros_ec_lid_angle_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index a3b319913097..c410aa804698 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -297,13 +297,15 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 
 	resp = (struct ec_response_motion_sense *)msg->data;
 	sensor_num = resp->dump.sensor_count;
-	/* Allocate 1 extra sensors in FIFO are needed */
-	sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
+	/*
+	 * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
+	 */
+	sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
 			       GFP_KERNEL);
 	if (sensor_cells == NULL)
 		goto error;
 
-	sensor_platforms = kcalloc(sensor_num + 1,
+	sensor_platforms = kcalloc(sensor_num,
 				   sizeof(struct cros_ec_sensor_platform),
 				   GFP_KERNEL);
 	if (sensor_platforms == NULL)
@@ -363,6 +365,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
 		sensor_cells[id].name = "cros-ec-ring";
 		id++;
 	}
+	if (cros_ec_check_features(ec,
+				EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
+		sensor_cells[id].name = "cros-ec-lid-angle";
+		id++;
+	}
 
 	ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
 			      NULL, 0, NULL);
-- 
2.21.0.593.g511ec345e18-goog


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v6] iio: cros_ec: Add lid angle driver
  2019-04-25  0:29 [PATCH v6] iio: cros_ec: Add lid angle driver Gwendal Grignou
@ 2019-04-27 13:21 ` Jonathan Cameron
  2019-04-27 13:24   ` Jonathan Cameron
  2019-05-08 10:48 ` Lee Jones
  1 sibling, 1 reply; 5+ messages in thread
From: Jonathan Cameron @ 2019-04-27 13:21 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, lee.jones, linux-iio, linux-kernel

On Wed, 24 Apr 2019 17:29:32 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> Add a IIO driver that reports the angle between the lid and the base for
> ChromeOS convertible device.
> 
> Tested on eve with ToT EC firmware.
> Check driver is loaded and lid angle is correct.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
I am a little curious... In what way is this a counter driver (comments
at the top of the main file)?

Anyhow, that's no reason not to apply it.  However, it has just missed
the coming merge window unless Linus makes 'it is delayed noises' tomorrow.

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> Changes in v6:
> - Fix lock held in an error path error.
> 
> Changes in v5:
> - Remove unnecessary define.
> - v4 was the wrong patch file
> 
> Changes in v3:
> - Use static channel array, simplify code because index is always 0.
> 
> Changes in v2:
> - Fix license, remove driver_module field.
> 
>  drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
>  drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
>  .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++
>  drivers/mfd/cros_ec_dev.c                     |  13 +-
>  4 files changed, 159 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> 
> diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> index 135f6825903f..aacc2ab9c34f 100644
> --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
>  	  Accelerometers, Gyroscope and Magnetometer that are
>  	  presented by the ChromeOS EC Sensor hub.
>  	  Creates an IIO device for each functions.
> +
> +config IIO_CROS_EC_SENSORS_LID_ANGLE
> +	tristate "ChromeOS EC Sensor for lid angle"
> +	depends on IIO_CROS_EC_SENSORS_CORE
> +	help
> +	  Module to report the angle between lid and base for some
> +	  convertible devices.
> +	  This module is loaded when the EC can calculate the angle between the base
> +	  and the lid.
> diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> index ec716ff2a775..a35ee232ac07 100644
> --- a/drivers/iio/common/cros_ec_sensors/Makefile
> +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> @@ -4,3 +4,4 @@
>  
>  obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
>  obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> new file mode 100644
> index 000000000000..876dfd176b0e
> --- /dev/null
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/*
> + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
> + *
> + * Copyright 2018 Google, Inc
> + *
> + * This driver uses the cros-ec interface to communicate with the Chrome OS
> + * EC about counter sensors. Counters are presented through
> + * iio sysfs.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/common/cros_ec_sensors_core.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/cros_ec.h>
> +#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define DRV_NAME "cros-ec-lid-angle"
> +
> +/*
> + * One channel for the lid angle, the other for timestamp.
> + */
> +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
> +	{
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +		.scan_type.realbits = CROS_EC_SENSOR_BITS,
> +		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
> +		.scan_type.sign = 'u',
> +		.type = IIO_ANGL
> +	},
> +	IIO_CHAN_SOFT_TIMESTAMP(1)
> +};
> +
> +/* State data for ec_sensors iio driver. */
> +struct cros_ec_lid_angle_state {
> +	/* Shared by all sensors */
> +	struct cros_ec_sensors_core_state core;
> +};
> +
> +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
> +					  unsigned long scan_mask, s16 *data)
> +{
> +	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
> +	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
> +	if (ret) {
> +		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
> +		return ret;
> +	}
> +
> +	*data = st->resp->lid_angle.value;
> +	return 0;
> +}
> +
> +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
> +				    struct iio_chan_spec const *chan,
> +				    int *val, int *val2, long mask)
> +{
> +	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
> +	s16 data;
> +	int ret;
> +
> +	mutex_lock(&st->core.cmd_lock);
> +	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
> +	if (ret == 0) {
> +		*val = data;
> +		ret = IIO_VAL_INT;
> +	}
> +	mutex_unlock(&st->core.cmd_lock);
> +	return ret;
> +}
> +
> +static const struct iio_info cros_ec_lid_angle_info = {
> +	.read_raw = &cros_ec_lid_angle_read,
> +};
> +
> +static int cros_ec_lid_angle_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct iio_dev *indio_dev;
> +	struct cros_ec_lid_angle_state *state;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->info = &cros_ec_lid_angle_info;
> +	state = iio_priv(indio_dev);
> +	indio_dev->channels = cros_ec_lid_angle_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
> +
> +	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
> +
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> +			cros_ec_sensors_capture, NULL);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct platform_device_id cros_ec_lid_angle_ids[] = {
> +	{
> +		.name = DRV_NAME,
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
> +
> +static struct platform_driver cros_ec_lid_angle_platform_driver = {
> +	.driver = {
> +		.name	= DRV_NAME,
> +		.pm	= &cros_ec_sensors_pm_ops,
> +	},
> +	.probe		= cros_ec_lid_angle_probe,
> +	.id_table	= cros_ec_lid_angle_ids,
> +};
> +module_platform_driver(cros_ec_lid_angle_platform_driver);
> +
> +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index a3b319913097..c410aa804698 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -297,13 +297,15 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
>  
>  	resp = (struct ec_response_motion_sense *)msg->data;
>  	sensor_num = resp->dump.sensor_count;
> -	/* Allocate 1 extra sensors in FIFO are needed */
> -	sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
> +	/*
> +	 * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
> +	 */
> +	sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
>  			       GFP_KERNEL);
>  	if (sensor_cells == NULL)
>  		goto error;
>  
> -	sensor_platforms = kcalloc(sensor_num + 1,
> +	sensor_platforms = kcalloc(sensor_num,
>  				   sizeof(struct cros_ec_sensor_platform),
>  				   GFP_KERNEL);
>  	if (sensor_platforms == NULL)
> @@ -363,6 +365,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
>  		sensor_cells[id].name = "cros-ec-ring";
>  		id++;
>  	}
> +	if (cros_ec_check_features(ec,
> +				EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
> +		sensor_cells[id].name = "cros-ec-lid-angle";
> +		id++;
> +	}
>  
>  	ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
>  			      NULL, 0, NULL);


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v6] iio: cros_ec: Add lid angle driver
  2019-04-27 13:21 ` Jonathan Cameron
@ 2019-04-27 13:24   ` Jonathan Cameron
  2019-04-27 21:27     ` Gwendal Grignou
  0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Cameron @ 2019-04-27 13:24 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, lee.jones, linux-iio, linux-kernel

On Sat, 27 Apr 2019 14:21:12 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Wed, 24 Apr 2019 17:29:32 -0700
> Gwendal Grignou <gwendal@chromium.org> wrote:
> 
> > Add a IIO driver that reports the angle between the lid and the base for
> > ChromeOS convertible device.
> > 
> > Tested on eve with ToT EC firmware.
> > Check driver is loaded and lid angle is correct.
> > 
> > Signed-off-by: Gwendal Grignou <gwendal@chromium.org>  
> I am a little curious... In what way is this a counter driver (comments
> at the top of the main file)?
> 
> Anyhow, that's no reason not to apply it.  However, it has just missed
> the coming merge window unless Linus makes 'it is delayed noises' tomorrow.
> 
> Applied to the togreg branch of iio.git and pushed out as testing
> for the autobuilders to play with it.
Ah. Should have waited for my local build test to finish.

I'm guessing this has a dependency I don't know about?
MOTIONSENSE_CMD_LID_ANGLE isn't defined.

Jonathan

> 
> Thanks,
> 
> Jonathan
> 
> > ---
> > Changes in v6:
> > - Fix lock held in an error path error.
> > 
> > Changes in v5:
> > - Remove unnecessary define.
> > - v4 was the wrong patch file
> > 
> > Changes in v3:
> > - Use static channel array, simplify code because index is always 0.
> > 
> > Changes in v2:
> > - Fix license, remove driver_module field.
> > 
> >  drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
> >  drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
> >  .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++
> >  drivers/mfd/cros_ec_dev.c                     |  13 +-
> >  4 files changed, 159 insertions(+), 3 deletions(-)
> >  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > 
> > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> > index 135f6825903f..aacc2ab9c34f 100644
> > --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
> >  	  Accelerometers, Gyroscope and Magnetometer that are
> >  	  presented by the ChromeOS EC Sensor hub.
> >  	  Creates an IIO device for each functions.
> > +
> > +config IIO_CROS_EC_SENSORS_LID_ANGLE
> > +	tristate "ChromeOS EC Sensor for lid angle"
> > +	depends on IIO_CROS_EC_SENSORS_CORE
> > +	help
> > +	  Module to report the angle between lid and base for some
> > +	  convertible devices.
> > +	  This module is loaded when the EC can calculate the angle between the base
> > +	  and the lid.
> > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> > index ec716ff2a775..a35ee232ac07 100644
> > --- a/drivers/iio/common/cros_ec_sensors/Makefile
> > +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> > @@ -4,3 +4,4 @@
> >  
> >  obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
> >  obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
> > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > new file mode 100644
> > index 000000000000..876dfd176b0e
> > --- /dev/null
> > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > @@ -0,0 +1,139 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +/*
> > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
> > + *
> > + * Copyright 2018 Google, Inc
> > + *
> > + * This driver uses the cros-ec interface to communicate with the Chrome OS
> > + * EC about counter sensors. Counters are presented through
> > + * iio sysfs.
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/device.h>
> > +#include <linux/iio/buffer.h>
> > +#include <linux/iio/common/cros_ec_sensors_core.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/kfifo_buf.h>
> > +#include <linux/iio/trigger.h>
> > +#include <linux/iio/triggered_buffer.h>
> > +#include <linux/iio/trigger_consumer.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/cros_ec.h>
> > +#include <linux/mfd/cros_ec_commands.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/slab.h>
> > +
> > +#define DRV_NAME "cros-ec-lid-angle"
> > +
> > +/*
> > + * One channel for the lid angle, the other for timestamp.
> > + */
> > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
> > +	{
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > +		.scan_type.realbits = CROS_EC_SENSOR_BITS,
> > +		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
> > +		.scan_type.sign = 'u',
> > +		.type = IIO_ANGL
> > +	},
> > +	IIO_CHAN_SOFT_TIMESTAMP(1)
> > +};
> > +
> > +/* State data for ec_sensors iio driver. */
> > +struct cros_ec_lid_angle_state {
> > +	/* Shared by all sensors */
> > +	struct cros_ec_sensors_core_state core;
> > +};
> > +
> > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
> > +					  unsigned long scan_mask, s16 *data)
> > +{
> > +	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> > +	int ret;
> > +
> > +	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
> > +	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
> > +	if (ret) {
> > +		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
> > +		return ret;
> > +	}
> > +
> > +	*data = st->resp->lid_angle.value;
> > +	return 0;
> > +}
> > +
> > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
> > +				    struct iio_chan_spec const *chan,
> > +				    int *val, int *val2, long mask)
> > +{
> > +	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
> > +	s16 data;
> > +	int ret;
> > +
> > +	mutex_lock(&st->core.cmd_lock);
> > +	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
> > +	if (ret == 0) {
> > +		*val = data;
> > +		ret = IIO_VAL_INT;
> > +	}
> > +	mutex_unlock(&st->core.cmd_lock);
> > +	return ret;
> > +}
> > +
> > +static const struct iio_info cros_ec_lid_angle_info = {
> > +	.read_raw = &cros_ec_lid_angle_read,
> > +};
> > +
> > +static int cros_ec_lid_angle_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct iio_dev *indio_dev;
> > +	struct cros_ec_lid_angle_state *state;
> > +	int ret;
> > +
> > +	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> > +	if (!indio_dev)
> > +		return -ENOMEM;
> > +
> > +	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
> > +	if (ret)
> > +		return ret;
> > +
> > +	indio_dev->info = &cros_ec_lid_angle_info;
> > +	state = iio_priv(indio_dev);
> > +	indio_dev->channels = cros_ec_lid_angle_channels;
> > +	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
> > +
> > +	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
> > +
> > +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > +			cros_ec_sensors_capture, NULL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> > +static const struct platform_device_id cros_ec_lid_angle_ids[] = {
> > +	{
> > +		.name = DRV_NAME,
> > +	},
> > +	{ /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
> > +
> > +static struct platform_driver cros_ec_lid_angle_platform_driver = {
> > +	.driver = {
> > +		.name	= DRV_NAME,
> > +		.pm	= &cros_ec_sensors_pm_ops,
> > +	},
> > +	.probe		= cros_ec_lid_angle_probe,
> > +	.id_table	= cros_ec_lid_angle_ids,
> > +};
> > +module_platform_driver(cros_ec_lid_angle_platform_driver);
> > +
> > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> > index a3b319913097..c410aa804698 100644
> > --- a/drivers/mfd/cros_ec_dev.c
> > +++ b/drivers/mfd/cros_ec_dev.c
> > @@ -297,13 +297,15 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
> >  
> >  	resp = (struct ec_response_motion_sense *)msg->data;
> >  	sensor_num = resp->dump.sensor_count;
> > -	/* Allocate 1 extra sensors in FIFO are needed */
> > -	sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
> > +	/*
> > +	 * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
> > +	 */
> > +	sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
> >  			       GFP_KERNEL);
> >  	if (sensor_cells == NULL)
> >  		goto error;
> >  
> > -	sensor_platforms = kcalloc(sensor_num + 1,
> > +	sensor_platforms = kcalloc(sensor_num,
> >  				   sizeof(struct cros_ec_sensor_platform),
> >  				   GFP_KERNEL);
> >  	if (sensor_platforms == NULL)
> > @@ -363,6 +365,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
> >  		sensor_cells[id].name = "cros-ec-ring";
> >  		id++;
> >  	}
> > +	if (cros_ec_check_features(ec,
> > +				EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
> > +		sensor_cells[id].name = "cros-ec-lid-angle";
> > +		id++;
> > +	}
> >  
> >  	ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
> >  			      NULL, 0, NULL);  
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v6] iio: cros_ec: Add lid angle driver
  2019-04-27 13:24   ` Jonathan Cameron
@ 2019-04-27 21:27     ` Gwendal Grignou
  0 siblings, 0 replies; 5+ messages in thread
From: Gwendal Grignou @ 2019-04-27 21:27 UTC (permalink / raw)
  To: Jonathan Cameron
  Cc: Enric Balletbo i Serra, Benson Leung, Guenter Roeck, Lee Jones,
	linux-iio, linux-kernel

On Sat, Apr 27, 2019 at 6:24 AM Jonathan Cameron
<jic23@jic23.retrosnub.co.uk> wrote:
>
> On Sat, 27 Apr 2019 14:21:12 +0100
> Jonathan Cameron <jic23@kernel.org> wrote:
>
> > On Wed, 24 Apr 2019 17:29:32 -0700
> > Gwendal Grignou <gwendal@chromium.org> wrote:
> >
> > > Add a IIO driver that reports the angle between the lid and the base for
> > > ChromeOS convertible device.
> > >
> > Tested on eve with ToT EC firmware.
> > > Check driver is loaded and lid angle is correct.
> > >
> > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> > I am a little curious... In what way is this a counter driver (comments
> > at the top of the main file)?
It is a mistake, I used another driver .c file as a starting point. I
will fix it.
> >
> > Anyhow, that's no reason not to apply it.  However, it has just missed
> > the coming merge window unless Linus makes 'it is delayed noises' tomorrow.
> >
> > Applied to the togreg branch of iio.git and pushed out as testing
> > for the autobuilders to play with it.
> Ah. Should have waited for my local build test to finish.
>
> I'm guessing this has a dependency I don't know about?
> MOTIONSENSE_CMD_LID_ANGLE isn't defined.
Yes, that constant is part of the cros_ec_commands.h update, in patch
"[PATCH 15/30] mfd: cros_ec: Complete MEMS sensor API"

Gwendal.
>
> Jonathan
>
> >
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > Changes in v6:
> > > - Fix lock held in an error path error.
> > >
> > > Changes in v5:
> > > - Remove unnecessary define.
> > > - v4 was the wrong patch file
> > >
> > > Changes in v3:
> > > - Use static channel array, simplify code because index is always 0.
> > >
> > > Changes in v2:
> > > - Fix license, remove driver_module field.
> > >
> > >  drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
> > >  drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
> > >  .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++
> > >  drivers/mfd/cros_ec_dev.c                     |  13 +-
> > >  4 files changed, 159 insertions(+), 3 deletions(-)
> > >  create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > >
> > > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
> > > index 135f6825903f..aacc2ab9c34f 100644
> > > --- a/drivers/iio/common/cros_ec_sensors/Kconfig
> > > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig
> > > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
> > >       Accelerometers, Gyroscope and Magnetometer that are
> > >       presented by the ChromeOS EC Sensor hub.
> > >       Creates an IIO device for each functions.
> > > +
> > > +config IIO_CROS_EC_SENSORS_LID_ANGLE
> > > +   tristate "ChromeOS EC Sensor for lid angle"
> > > +   depends on IIO_CROS_EC_SENSORS_CORE
> > > +   help
> > > +     Module to report the angle between lid and base for some
> > > +     convertible devices.
> > > +     This module is loaded when the EC can calculate the angle between the base
> > > +     and the lid.
> > > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
> > > index ec716ff2a775..a35ee232ac07 100644
> > > --- a/drivers/iio/common/cros_ec_sensors/Makefile
> > > +++ b/drivers/iio/common/cros_ec_sensors/Makefile
> > > @@ -4,3 +4,4 @@
> > >
> > >  obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
> > >  obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
> > > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
> > > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > > new file mode 100644
> > > index 000000000000..876dfd176b0e
> > > --- /dev/null
> > > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
> > > @@ -0,0 +1,139 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +
> > > +/*
> > > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
> > > + *
> > > + * Copyright 2018 Google, Inc
> > > + *
> > > + * This driver uses the cros-ec interface to communicate with the Chrome OS
> > > + * EC about counter sensors. Counters are presented through
> > > + * iio sysfs.
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/device.h>
> > > +#include <linux/iio/buffer.h>
> > > +#include <linux/iio/common/cros_ec_sensors_core.h>
> > > +#include <linux/iio/iio.h>
> > > +#include <linux/iio/kfifo_buf.h>
> > > +#include <linux/iio/trigger.h>
> > > +#include <linux/iio/triggered_buffer.h>
> > > +#include <linux/iio/trigger_consumer.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/mfd/cros_ec.h>
> > > +#include <linux/mfd/cros_ec_commands.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/slab.h>
> > > +
> > > +#define DRV_NAME "cros-ec-lid-angle"
> > > +
> > > +/*
> > > + * One channel for the lid angle, the other for timestamp.
> > > + */
> > > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
> > > +   {
> > > +           .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > > +           .scan_type.realbits = CROS_EC_SENSOR_BITS,
> > > +           .scan_type.storagebits = CROS_EC_SENSOR_BITS,
> > > +           .scan_type.sign = 'u',
> > > +           .type = IIO_ANGL
> > > +   },
> > > +   IIO_CHAN_SOFT_TIMESTAMP(1)
> > > +};
> > > +
> > > +/* State data for ec_sensors iio driver. */
> > > +struct cros_ec_lid_angle_state {
> > > +   /* Shared by all sensors */
> > > +   struct cros_ec_sensors_core_state core;
> > > +};
> > > +
> > > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
> > > +                                     unsigned long scan_mask, s16 *data)
> > > +{
> > > +   struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
> > > +   int ret;
> > > +
> > > +   st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
> > > +   ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
> > > +   if (ret) {
> > > +           dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
> > > +           return ret;
> > > +   }
> > > +
> > > +   *data = st->resp->lid_angle.value;
> > > +   return 0;
> > > +}
> > > +
> > > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
> > > +                               struct iio_chan_spec const *chan,
> > > +                               int *val, int *val2, long mask)
> > > +{
> > > +   struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
> > > +   s16 data;
> > > +   int ret;
> > > +
> > > +   mutex_lock(&st->core.cmd_lock);
> > > +   ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
> > > +   if (ret == 0) {
> > > +           *val = data;
> > > +           ret = IIO_VAL_INT;
> > > +   }
> > > +   mutex_unlock(&st->core.cmd_lock);
> > > +   return ret;
> > > +}
> > > +
> > > +static const struct iio_info cros_ec_lid_angle_info = {
> > > +   .read_raw = &cros_ec_lid_angle_read,
> > > +};
> > > +
> > > +static int cros_ec_lid_angle_probe(struct platform_device *pdev)
> > > +{
> > > +   struct device *dev = &pdev->dev;
> > > +   struct iio_dev *indio_dev;
> > > +   struct cros_ec_lid_angle_state *state;
> > > +   int ret;
> > > +
> > > +   indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
> > > +   if (!indio_dev)
> > > +           return -ENOMEM;
> > > +
> > > +   ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
> > > +   if (ret)
> > > +           return ret;
> > > +
> > > +   indio_dev->info = &cros_ec_lid_angle_info;
> > > +   state = iio_priv(indio_dev);
> > > +   indio_dev->channels = cros_ec_lid_angle_channels;
> > > +   indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
> > > +
> > > +   state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
> > > +
> > > +   ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> > > +                   cros_ec_sensors_capture, NULL);
> > > +   if (ret)
> > > +           return ret;
> > > +
> > > +   return devm_iio_device_register(dev, indio_dev);
> > > +}
> > > +
> > > +static const struct platform_device_id cros_ec_lid_angle_ids[] = {
> > > +   {
> > > +           .name = DRV_NAME,
> > > +   },
> > > +   { /* sentinel */ }
> > > +};
> > > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
> > > +
> > > +static struct platform_driver cros_ec_lid_angle_platform_driver = {
> > > +   .driver = {
> > > +           .name   = DRV_NAME,
> > > +           .pm     = &cros_ec_sensors_pm_ops,
> > > +   },
> > > +   .probe          = cros_ec_lid_angle_probe,
> > > +   .id_table       = cros_ec_lid_angle_ids,
> > > +};
> > > +module_platform_driver(cros_ec_lid_angle_platform_driver);
> > > +
> > > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
> > > +MODULE_LICENSE("GPL v2");
> > > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> > > index a3b319913097..c410aa804698 100644
> > > --- a/drivers/mfd/cros_ec_dev.c
> > > +++ b/drivers/mfd/cros_ec_dev.c
> > > @@ -297,13 +297,15 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
> > >
> > >     resp = (struct ec_response_motion_sense *)msg->data;
> > >     sensor_num = resp->dump.sensor_count;
> > > -   /* Allocate 1 extra sensors in FIFO are needed */
> > > -   sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
> > > +   /*
> > > +    * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
> > > +    */
> > > +   sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
> > >                            GFP_KERNEL);
> > >     if (sensor_cells == NULL)
> > >             goto error;
> > >
> > > -   sensor_platforms = kcalloc(sensor_num + 1,
> > > +   sensor_platforms = kcalloc(sensor_num,
> > >                                sizeof(struct cros_ec_sensor_platform),
> > >                                GFP_KERNEL);
> > >     if (sensor_platforms == NULL)
> > > @@ -363,6 +365,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec)
> > >             sensor_cells[id].name = "cros-ec-ring";
> > >             id++;
> > >     }
> > > +   if (cros_ec_check_features(ec,
> > > +                           EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
> > > +           sensor_cells[id].name = "cros-ec-lid-angle";
> > > +           id++;
> > > +   }
> > >
> > >     ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
> > >                           NULL, 0, NULL);
> >
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v6] iio: cros_ec: Add lid angle driver
  2019-04-25  0:29 [PATCH v6] iio: cros_ec: Add lid angle driver Gwendal Grignou
  2019-04-27 13:21 ` Jonathan Cameron
@ 2019-05-08 10:48 ` Lee Jones
  1 sibling, 0 replies; 5+ messages in thread
From: Lee Jones @ 2019-05-08 10:48 UTC (permalink / raw)
  To: Gwendal Grignou
  Cc: enric.balletbo, bleung, groeck, jic23, linux-iio, linux-kernel

On Wed, 24 Apr 2019, Gwendal Grignou wrote:

> Add a IIO driver that reports the angle between the lid and the base for
> ChromeOS convertible device.
> 
> Tested on eve with ToT EC firmware.
> Check driver is loaded and lid angle is correct.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> ---
> Changes in v6:
> - Fix lock held in an error path error.
> 
> Changes in v5:
> - Remove unnecessary define.
> - v4 was the wrong patch file
> 
> Changes in v3:
> - Use static channel array, simplify code because index is always 0.
> 
> Changes in v2:
> - Fix license, remove driver_module field.
> 
>  drivers/iio/common/cros_ec_sensors/Kconfig    |   9 ++
>  drivers/iio/common/cros_ec_sensors/Makefile   |   1 +
>  .../cros_ec_sensors/cros_ec_lid_angle.c       | 139 ++++++++++++++++++

>  drivers/mfd/cros_ec_dev.c                     |  13 +-

Since there aren't any built-time dependencies between them, this
change should be pulled out into a separate patch, which will go in
via the MFD tree.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-05-08 10:48 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-25  0:29 [PATCH v6] iio: cros_ec: Add lid angle driver Gwendal Grignou
2019-04-27 13:21 ` Jonathan Cameron
2019-04-27 13:24   ` Jonathan Cameron
2019-04-27 21:27     ` Gwendal Grignou
2019-05-08 10:48 ` Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).