LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Cc: "Sean Paul" <seanpaul@chromium.org>,
	"Daniel Vetter" <daniel@ffwll.ch>,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <maxime.ripard@bootlin.com>,
	"Sean Paul" <sean@poorly.run>, "David Airlie" <airlied@linux.ie>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 01/11] drm: Add atomic variants of enable/disable to encoder helper funcs
Date: Wed,  8 May 2019 12:09:06 -0400	[thread overview]
Message-ID: <20190508160920.144739-2-sean@poorly.run> (raw)
In-Reply-To: <20190508160920.144739-1-sean@poorly.run>

From: Sean Paul <seanpaul@chromium.org>

This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.

Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.

This is particularly important for the upcoming self refresh helpers.

Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/drm_atomic_helper.c      |  8 +++-
 include/drm/drm_modeset_helper_vtables.h | 48 ++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 553415fe8ede..ccf01831f265 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -999,7 +999,9 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
 
 		/* Right function depends upon target state. */
 		if (funcs) {
-			if (new_conn_state->crtc && funcs->prepare)
+			if (funcs->atomic_disable)
+				funcs->atomic_disable(encoder, old_state);
+			else if (new_conn_state->crtc && funcs->prepare)
 				funcs->prepare(encoder);
 			else if (funcs->disable)
 				funcs->disable(encoder);
@@ -1309,7 +1311,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
 		drm_bridge_pre_enable(encoder->bridge);
 
 		if (funcs) {
-			if (funcs->enable)
+			if (funcs->atomic_enable)
+				funcs->atomic_enable(encoder, old_state);
+			else if (funcs->enable)
 				funcs->enable(encoder);
 			else if (funcs->commit)
 				funcs->commit(encoder);
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index 8f3602811eb5..aa509c107083 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -675,6 +675,51 @@ struct drm_encoder_helper_funcs {
 	enum drm_connector_status (*detect)(struct drm_encoder *encoder,
 					    struct drm_connector *connector);
 
+	/**
+	 * @atomic_disable:
+	 *
+	 * This callback should be used to disable the encoder. With the atomic
+	 * drivers it is called before this encoder's CRTC has been shut off
+	 * using their own &drm_crtc_helper_funcs.atomic_disable hook. If that
+	 * sequence is too simple drivers can just add their own driver private
+	 * encoder hooks and call them from CRTC's callback by looping over all
+	 * encoders connected to it using for_each_encoder_on_crtc().
+	 *
+	 * This callback is a variant of @disable that provides the atomic state
+	 * to the driver. It takes priority over @disable during atomic commits.
+	 *
+	 * This hook is used only by atomic helpers. Atomic drivers don't need
+	 * to implement it if there's no need to disable anything at the encoder
+	 * level. To ensure that runtime PM handling (using either DPMS or the
+	 * new "ACTIVE" property) works @atomic_disable must be the inverse of
+	 * @atomic_enable.
+	 */
+	void (*atomic_disable)(struct drm_encoder *encoder,
+			       struct drm_atomic_state *state);
+
+	/**
+	 * @atomic_enable:
+	 *
+	 * This callback should be used to enable the encoder. It is called
+	 * after this encoder's CRTC has been enabled using their own
+	 * &drm_crtc_helper_funcs.atomic_enable hook. If that sequence is
+	 * too simple drivers can just add their own driver private encoder
+	 * hooks and call them from CRTC's callback by looping over all encoders
+	 * connected to it using for_each_encoder_on_crtc().
+	 *
+	 * This callback is a variant of @enable that provides the atomic state
+	 * to the driver. It is called in place of @enable during atomic
+	 * commits.
+	 *
+	 * This hook is used only by atomic helpers, for symmetry with @disable.
+	 * Atomic drivers don't need to implement it if there's no need to
+	 * enable anything at the encoder level. To ensure that runtime PM
+	 * handling (using either DPMS or the new "ACTIVE" property) works
+	 * @enable must be the inverse of @disable for atomic drivers.
+	 */
+	void (*atomic_enable)(struct drm_encoder *encoder,
+			      struct drm_atomic_state *state);
+
 	/**
 	 * @disable:
 	 *
@@ -691,6 +736,9 @@ struct drm_encoder_helper_funcs {
 	 * handling (using either DPMS or the new "ACTIVE" property) works
 	 * @disable must be the inverse of @enable for atomic drivers.
 	 *
+	 * For atomic drivers also consider @atomic_disable and save yourself
+	 * from having to read the NOTE below!
+	 *
 	 * NOTE:
 	 *
 	 * With legacy CRTC helpers there's a big semantic difference between
-- 
Sean Paul, Software Engineer, Google / Chromium OS


       reply	other threads:[~2019-05-08 16:09 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190508160920.144739-1-sean@poorly.run>
2019-05-08 16:09 ` Sean Paul [this message]
2019-05-08 16:31   ` Daniel Vetter
2019-05-08 18:18     ` Sean Paul
2019-05-08 16:09 ` [PATCH v4 02/11] drm: Add drm_atomic_get_(old|new-_connector_for_encoder() helpers Sean Paul
2019-05-08 16:33   ` Daniel Vetter
2019-05-12 16:48     ` Laurent Pinchart
2019-05-08 16:09 ` [PATCH v4 03/11] drm: Add atomic variants for bridge enable/disable Sean Paul
2019-05-21  8:58   ` Andrzej Hajda
2019-05-21 14:31     ` Sean Paul
2019-05-08 16:09 ` [PATCH v4 04/11] drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state Sean Paul
2019-05-08 16:09 ` [PATCH v4 05/11] drm: Add helpers to kick off self refresh mode in drivers Sean Paul
2019-05-08 16:35   ` Daniel Vetter
2019-05-08 16:09 ` [PATCH v4 06/11] drm/rockchip: Use dirtyfb helper Sean Paul
2019-05-08 16:09 ` [PATCH v4 07/11] drm/rockchip: Check for fast link training before enabling psr Sean Paul
2019-05-08 16:09 ` [PATCH v4 08/11] drm/rockchip: Use the helpers for PSR Sean Paul
2019-05-08 16:09 ` [PATCH v4 09/11] drm/rockchip: Use vop_win in vop_win_disable instead of vop_win_data Sean Paul
2019-05-08 16:09 ` [PATCH v4 10/11] drm/rockchip: Don't fully disable vop on self refresh Sean Paul
2019-05-08 16:09 ` [PATCH v4 11/11] drm/rockchip: Use drm_atomic_helper_commit_tail_rpm Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190508160920.144739-2-sean@poorly.run \
    --to=sean@poorly.run \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=seanpaul@chromium.org \
    --cc=ville.syrjala@linux.intel.com \
    --subject='Re: [PATCH v4 01/11] drm: Add atomic variants of enable/disable to encoder helper funcs' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).