LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v2 0/4] Add reset controller support for BM1880 SoC
@ 2019-05-08 16:53 Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-08 16:53 UTC (permalink / raw)
  To: p.zabel, robh+dt
  Cc: linux-kernel, devicetree, haitao.suo, darren.tsao, Manivannan Sadhasivam

Hello,

This patchset adds reset controller support for Bitmain BM1880 SoC.
BM1880 SoC has two reset controllers each controlling reset lines of
different peripherals. And the reset-simple driver has been reused here.

This patchset has been tested on 96Boards Sophon Edge board.

Thanks,
Mani

Changes in v2:

As per review from Philipp:

* Reused reset_simple_active_low struct instead of a new one for bm1880
* Splitted the SPDX license change to a separate commit
* Added Reviewed-by tags from Rob and Philipp

Manivannan Sadhasivam (4):
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller
  arm64: dts: bitmain: Add reset controller support for BM1880 SoC
  reset: Add reset controller support for BM1880 SoC
  reset: Switch to SPDX license identifier for reset-simple

 .../bindings/reset/bitmain,bm1880-reset.txt   |  18 +++
 arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  17 +++
 drivers/reset/Kconfig                         |   3 +-
 drivers/reset/reset-simple.c                  |   8 +-
 .../dt-bindings/reset/bitmain,bm1880-reset.h  | 106 ++++++++++++++++++
 5 files changed, 146 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
 create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h

-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller
  2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
@ 2019-05-08 16:53 ` Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC Manivannan Sadhasivam
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-08 16:53 UTC (permalink / raw)
  To: p.zabel, robh+dt
  Cc: linux-kernel, devicetree, haitao.suo, darren.tsao, Manivannan Sadhasivam

Add devicetree binding for Bitmain BM1880 SoC reset controller. This SoC
has two reset controllers each controlling reset lines of different
peripherals.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/reset/bitmain,bm1880-reset.txt   |  18 +++
 .../dt-bindings/reset/bitmain,bm1880-reset.h  | 106 ++++++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
 create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h

diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
new file mode 100644
index 000000000000..0674ae904b19
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
@@ -0,0 +1,18 @@
+Bitmain BM1880 SoC Reset Controller
+===================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible:   Should be "bitmain,bm1880-reset"
+- reg:          Offset and length of reset controller space in SCTRL.
+- #reset-cells: Must be 1.
+
+Example:
+
+        reset: reset-controller@800 {
+                compatible = "bitmain,bm1880-reset";
+                reg = <0x800 0x8>;
+                #reset-cells = <1>;
+        };
diff --git a/include/dt-bindings/reset/bitmain,bm1880-reset.h b/include/dt-bindings/reset/bitmain,bm1880-reset.h
new file mode 100644
index 000000000000..e8103ce6f4d6
--- /dev/null
+++ b/include/dt-bindings/reset/bitmain,bm1880-reset.h
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Bitmain Ltd.
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_BM1880_RESET_H
+#define _DT_BINDINGS_BM1880_RESET_H
+
+#define BM1880_RST_MAIN_AP		0
+#define BM1880_RST_SECOND_AP		1
+#define BM1880_RST_DDR			2
+#define BM1880_RST_VIDEO		3
+#define BM1880_RST_JPEG			4
+#define BM1880_RST_VPP			5
+#define BM1880_RST_GDMA			6
+#define BM1880_RST_AXI_SRAM		7
+#define BM1880_RST_TPU			8
+#define BM1880_RST_USB			9
+#define BM1880_RST_ETH0			10
+#define BM1880_RST_ETH1			11
+#define BM1880_RST_NAND			12
+#define BM1880_RST_EMMC			13
+#define BM1880_RST_SD			14
+#define BM1880_RST_SDMA			15
+#define BM1880_RST_I2S0			16
+#define BM1880_RST_I2S1			17
+#define BM1880_RST_UART0_1_CLK		18
+#define BM1880_RST_UART0_1_ACLK		19
+#define BM1880_RST_UART2_3_CLK		20
+#define BM1880_RST_UART2_3_ACLK		21
+#define BM1880_RST_MINER		22
+#define BM1880_RST_I2C0			23
+#define BM1880_RST_I2C1			24
+#define BM1880_RST_I2C2			25
+#define BM1880_RST_I2C3			26
+#define BM1880_RST_I2C4			27
+#define BM1880_RST_PWM0			28
+#define BM1880_RST_PWM1			29
+#define BM1880_RST_PWM2			30
+#define BM1880_RST_PWM3			31
+#define BM1880_RST_SPI			32
+#define BM1880_RST_GPIO0		33
+#define BM1880_RST_GPIO1		34
+#define BM1880_RST_GPIO2		35
+#define BM1880_RST_EFUSE		36
+#define BM1880_RST_WDT			37
+#define BM1880_RST_AHB_ROM		38
+#define BM1880_RST_SPIC			39
+
+#define BM1880_CLK_RST_A53		0
+#define BM1880_CLK_RST_50M_A53		1
+#define BM1880_CLK_RST_AHB_ROM		2
+#define BM1880_CLK_RST_AXI_SRAM		3
+#define BM1880_CLK_RST_DDR_AXI		4
+#define BM1880_CLK_RST_EFUSE		5
+#define BM1880_CLK_RST_APB_EFUSE	6
+#define BM1880_CLK_RST_AXI_EMMC		7
+#define BM1880_CLK_RST_EMMC		8
+#define BM1880_CLK_RST_100K_EMMC	9
+#define BM1880_CLK_RST_AXI_SD		10
+#define BM1880_CLK_RST_SD		11
+#define BM1880_CLK_RST_100K_SD		12
+#define BM1880_CLK_RST_500M_ETH0	13
+#define BM1880_CLK_RST_AXI_ETH0		14
+#define BM1880_CLK_RST_500M_ETH1	15
+#define BM1880_CLK_RST_AXI_ETH1		16
+#define BM1880_CLK_RST_AXI_GDMA		17
+#define BM1880_CLK_RST_APB_GPIO		18
+#define BM1880_CLK_RST_APB_GPIO_INTR	19
+#define BM1880_CLK_RST_GPIO_DB		20
+#define BM1880_CLK_RST_AXI_MINER	21
+#define BM1880_CLK_RST_AHB_SF		22
+#define BM1880_CLK_RST_SDMA_AXI		23
+#define BM1880_CLK_RST_SDMA_AUD		24
+#define BM1880_CLK_RST_APB_I2C		25
+#define BM1880_CLK_RST_APB_WDT		26
+#define BM1880_CLK_RST_APB_JPEG		27
+#define BM1880_CLK_RST_JPEG_AXI		28
+#define BM1880_CLK_RST_AXI_NF		29
+#define BM1880_CLK_RST_APB_NF		30
+#define BM1880_CLK_RST_NF		31
+#define BM1880_CLK_RST_APB_PWM		32
+#define BM1880_CLK_RST_RV		33
+#define BM1880_CLK_RST_APB_SPI		34
+#define BM1880_CLK_RST_TPU_AXI		35
+#define BM1880_CLK_RST_UART_500M	36
+#define BM1880_CLK_RST_APB_UART		37
+#define BM1880_CLK_RST_APB_I2S		38
+#define BM1880_CLK_RST_AXI_USB		39
+#define BM1880_CLK_RST_APB_USB		40
+#define BM1880_CLK_RST_125M_USB		41
+#define BM1880_CLK_RST_33K_USB		42
+#define BM1880_CLK_RST_12M_USB		43
+#define BM1880_CLK_RST_APB_VIDEO	44
+#define BM1880_CLK_RST_VIDEO_AXI	45
+#define BM1880_CLK_RST_VPP_AXI		46
+#define BM1880_CLK_RST_APB_VPP		47
+#define BM1880_CLK_RST_AXI1		48
+#define BM1880_CLK_RST_AXI2		49
+#define BM1880_CLK_RST_AXI3		50
+#define BM1880_CLK_RST_AXI4		51
+#define BM1880_CLK_RST_AXI5		52
+#define BM1880_CLK_RST_AXI6		53
+
+#endif /* _DT_BINDINGS_BM1880_RESET_H */
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC
  2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
@ 2019-05-08 16:53 ` Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 3/4] reset: " Manivannan Sadhasivam
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-08 16:53 UTC (permalink / raw)
  To: p.zabel, robh+dt
  Cc: linux-kernel, devicetree, haitao.suo, darren.tsao, Manivannan Sadhasivam

Add reset controller support for Bitmain BM1880 SoC. This SoC has two
reset controllers, each controlling reset lines of different peripherals.
This commit also adds reset support to UART peripherals.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 arch/arm64/boot/dts/bitmain/bm1880.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index fdfdc65d29ef..37ecb760a2d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
 
 / {
 	compatible = "bitmain,bm1880";
@@ -92,6 +93,18 @@
 				compatible = "bitmain,bm1880-pinctrl";
 				reg = <0x50 0x4B0>;
 			};
+
+			clk_rst: reset-controller@800 {
+				compatible = "bitmain,bm1880-reset";
+				reg = <0x800 0x8>;
+				#reset-cells = <1>;
+			};
+
+			rst: reset-controller@C00 {
+				compatible = "bitmain,bm1880-reset";
+				reg = <0xC00 0x8>;
+				#reset-cells = <1>;
+			};
 		};
 
 		uart0: serial@58018000 {
@@ -100,6 +113,7 @@
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_CLK>;
 			status = "disabled";
 		};
 
@@ -109,6 +123,7 @@
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_ACLK>;
 			status = "disabled";
 		};
 
@@ -118,6 +133,7 @@
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_CLK>;
 			status = "disabled";
 		};
 
@@ -127,6 +143,7 @@
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_ACLK>;
 			status = "disabled";
 		};
 	};
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 3/4] reset: Add reset controller support for BM1880 SoC
  2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC Manivannan Sadhasivam
@ 2019-05-08 16:53 ` Manivannan Sadhasivam
  2019-05-08 16:53 ` [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
  2019-05-10  8:57 ` [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
  4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-08 16:53 UTC (permalink / raw)
  To: p.zabel, robh+dt
  Cc: linux-kernel, devicetree, haitao.suo, darren.tsao, Manivannan Sadhasivam

Add reset controller support for Bitmain BM1880 SoC reusing the
reset-simple driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/reset/Kconfig        | 3 ++-
 drivers/reset/reset-simple.c | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 2c8c23db92fb..b25e8d139f0d 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -117,7 +117,7 @@ config RESET_QCOM_PDC
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
-	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
+	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
@@ -129,6 +129,7 @@ config RESET_SIMPLE
 	   - RCC reset controller in STM32 MCUs
 	   - Allwinner SoCs
 	   - ZTE's zx2967 family
+	   - Bitmain BM1880 SoC
 
 config RESET_STM32MP157
 	bool "STM32MP157 Reset Driver" if COMPILE_TEST
diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 77fbba3100c8..5e8c86470e6b 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -129,6 +129,8 @@ static const struct of_device_id reset_simple_dt_ids[] = {
 		.data = &reset_simple_active_low },
 	{ .compatible = "aspeed,ast2400-lpc-reset" },
 	{ .compatible = "aspeed,ast2500-lpc-reset" },
+	{ .compatible = "bitmain,bm1880-reset",
+		.data = &reset_simple_active_low },
 	{ /* sentinel */ },
 };
 
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple
  2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
                   ` (2 preceding siblings ...)
  2019-05-08 16:53 ` [PATCH v2 3/4] reset: " Manivannan Sadhasivam
@ 2019-05-08 16:53 ` Manivannan Sadhasivam
  2019-05-09  6:24   ` Maxime Ripard
  2019-05-10  8:57 ` [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
  4 siblings, 1 reply; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-08 16:53 UTC (permalink / raw)
  To: p.zabel, robh+dt
  Cc: linux-kernel, devicetree, haitao.suo, darren.tsao,
	Manivannan Sadhasivam, Maxime Ripard

Switch to SPDX license identifier for reset-simple driver.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/reset/reset-simple.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 5e8c86470e6b..8043ba48a30a 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Simple Reset Controller Driver
  *
@@ -8,11 +9,6 @@
  * Copyright 2013 Maxime Ripard
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/device.h>
-- 
2.17.1


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple
  2019-05-08 16:53 ` [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
@ 2019-05-09  6:24   ` Maxime Ripard
  0 siblings, 0 replies; 7+ messages in thread
From: Maxime Ripard @ 2019-05-09  6:24 UTC (permalink / raw)
  To: Manivannan Sadhasivam
  Cc: p.zabel, robh+dt, linux-kernel, devicetree, haitao.suo, darren.tsao

[-- Attachment #1: Type: text/plain, Size: 417 bytes --]

On Wed, May 08, 2019 at 10:23:19PM +0530, Manivannan Sadhasivam wrote:
> Switch to SPDX license identifier for reset-simple driver.
>
> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>

Thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH v2 0/4] Add reset controller support for BM1880 SoC
  2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
                   ` (3 preceding siblings ...)
  2019-05-08 16:53 ` [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
@ 2019-05-10  8:57 ` Manivannan Sadhasivam
  4 siblings, 0 replies; 7+ messages in thread
From: Manivannan Sadhasivam @ 2019-05-10  8:57 UTC (permalink / raw)
  To: p.zabel, robh+dt; +Cc: linux-kernel, devicetree, haitao.suo, darren.tsao

On Wed, May 08, 2019 at 10:23:15PM +0530, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds reset controller support for Bitmain BM1880 SoC.
> BM1880 SoC has two reset controllers each controlling reset lines of
> different peripherals. And the reset-simple driver has been reused here.
> 

Sorry, above information was wrong! Actually there is only one reset
controller in this SoC. The other one (clk_rst) is a set of registers used
for clock gating functionality (clarified by Bitmain Engineer), so I will
remove it in next version.

Thanks,
Mani

> This patchset has been tested on 96Boards Sophon Edge board.
> 
> Thanks,
> Mani
> 
> Changes in v2:
> 
> As per review from Philipp:
> 
> * Reused reset_simple_active_low struct instead of a new one for bm1880
> * Splitted the SPDX license change to a separate commit
> * Added Reviewed-by tags from Rob and Philipp
> 
> Manivannan Sadhasivam (4):
>   dt-bindings: reset: Add devicetree binding for BM1880 reset controller
>   arm64: dts: bitmain: Add reset controller support for BM1880 SoC
>   reset: Add reset controller support for BM1880 SoC
>   reset: Switch to SPDX license identifier for reset-simple
> 
>  .../bindings/reset/bitmain,bm1880-reset.txt   |  18 +++
>  arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  17 +++
>  drivers/reset/Kconfig                         |   3 +-
>  drivers/reset/reset-simple.c                  |   8 +-
>  .../dt-bindings/reset/bitmain,bm1880-reset.h  | 106 ++++++++++++++++++
>  5 files changed, 146 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
>  create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h
> 
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-05-10  8:58 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-08 16:53 [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-05-08 16:53 ` [PATCH v2 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
2019-05-08 16:53 ` [PATCH v2 2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-05-08 16:53 ` [PATCH v2 3/4] reset: " Manivannan Sadhasivam
2019-05-08 16:53 ` [PATCH v2 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
2019-05-09  6:24   ` Maxime Ripard
2019-05-10  8:57 ` [PATCH v2 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).