LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] staging: wlan-ng: collect return status without variable
@ 2019-05-10 2:39 Hariprasad Kelam
2019-05-10 10:57 ` Dan Carpenter
0 siblings, 1 reply; 5+ messages in thread
From: Hariprasad Kelam @ 2019-05-10 2:39 UTC (permalink / raw)
To: Greg Kroah-Hartman, Tim Collier, Chris Opperman,
Hariprasad Kelam, devel, linux-kernel
err and result variables are declared to collect return status
of prism2_domibset_uint32.
Check return status in if loop and return directly.
Rearragne code such that we can avoid declaring these variables.
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
---
drivers/staging/wlan-ng/cfg80211.c | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 8a862f7..5dad5ac 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -231,17 +231,12 @@ static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
{
struct wlandevice *wlandev = dev->ml_priv;
- int err = 0;
- int result = 0;
-
- result = prism2_domibset_uint32(wlandev,
- DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
- key_index);
-
- if (result)
- err = -EFAULT;
-
- return err;
+ if (prism2_domibset_uint32(wlandev,
+ DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
+ key_index))
+ return -EFAULT;
+ else
+ return 0;
}
static int prism2_get_station(struct wiphy *wiphy, struct net_device *dev,
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: wlan-ng: collect return status without variable
2019-05-10 2:39 [PATCH] staging: wlan-ng: collect return status without variable Hariprasad Kelam
@ 2019-05-10 10:57 ` Dan Carpenter
2019-05-10 17:23 ` Hariprasad Kelam
0 siblings, 1 reply; 5+ messages in thread
From: Dan Carpenter @ 2019-05-10 10:57 UTC (permalink / raw)
To: Hariprasad Kelam
Cc: Greg Kroah-Hartman, Tim Collier, Chris Opperman, devel, linux-kernel
On Fri, May 10, 2019 at 08:09:00AM +0530, Hariprasad Kelam wrote:
> diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
> index 8a862f7..5dad5ac 100644
> --- a/drivers/staging/wlan-ng/cfg80211.c
> +++ b/drivers/staging/wlan-ng/cfg80211.c
> @@ -231,17 +231,12 @@ static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
> {
> struct wlandevice *wlandev = dev->ml_priv;
>
> - int err = 0;
> - int result = 0;
> -
> - result = prism2_domibset_uint32(wlandev,
> - DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> - key_index);
> -
> - if (result)
> - err = -EFAULT;
> -
> - return err;
> + if (prism2_domibset_uint32(wlandev,
> + DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> + key_index))
> + return -EFAULT;
> + else
> + return 0;
We should just preserve the error codes from prism2_domibset_uint32().
return prism2_domibset_uint32(dev->ml_priv,
DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
key_index);
regards,
dan carpenter
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: wlan-ng: collect return status without variable
2019-05-10 10:57 ` Dan Carpenter
@ 2019-05-10 17:23 ` Hariprasad Kelam
2019-05-10 18:40 ` Dan Carpenter
0 siblings, 1 reply; 5+ messages in thread
From: Hariprasad Kelam @ 2019-05-10 17:23 UTC (permalink / raw)
To: Dan Carpenter, Greg Kroah-Hartman, Tim Collier, Chris Opperman,
devel, linux-kernel
On Fri, May 10, 2019 at 01:57:54PM +0300, Dan Carpenter wrote:
> On Fri, May 10, 2019 at 08:09:00AM +0530, Hariprasad Kelam wrote:
> > diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
> > index 8a862f7..5dad5ac 100644
> > --- a/drivers/staging/wlan-ng/cfg80211.c
> > +++ b/drivers/staging/wlan-ng/cfg80211.c
> > @@ -231,17 +231,12 @@ static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
> > {
> > struct wlandevice *wlandev = dev->ml_priv;
> >
> > - int err = 0;
> > - int result = 0;
> > -
> > - result = prism2_domibset_uint32(wlandev,
> > - DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > - key_index);
> > -
> > - if (result)
> > - err = -EFAULT;
> > -
> > - return err;
> > + if (prism2_domibset_uint32(wlandev,
> > + DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > + key_index))
> > + return -EFAULT;
> > + else
> > + return 0;
>
> We should just preserve the error codes from prism2_domibset_uint32().
>
> return prism2_domibset_uint32(dev->ml_priv,
> DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> key_index);
>
prism2_domibset_uint32 function can return -ENODEV,-EPERM,-EBUSY if
fail case.
If we observe the pattern of calling this function,we can find
"return -EFAULT on failure and 0 on success".
Due to this we can not collect return status directly.
> regards,
> dan carpenter
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: wlan-ng: collect return status without variable
2019-05-10 17:23 ` Hariprasad Kelam
@ 2019-05-10 18:40 ` Dan Carpenter
2019-05-11 7:58 ` Hariprasad Kelam
0 siblings, 1 reply; 5+ messages in thread
From: Dan Carpenter @ 2019-05-10 18:40 UTC (permalink / raw)
To: Hariprasad Kelam
Cc: Greg Kroah-Hartman, Tim Collier, Chris Opperman, devel, linux-kernel
On Fri, May 10, 2019 at 10:53:08PM +0530, Hariprasad Kelam wrote:
> On Fri, May 10, 2019 at 01:57:54PM +0300, Dan Carpenter wrote:
> > On Fri, May 10, 2019 at 08:09:00AM +0530, Hariprasad Kelam wrote:
> > > diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
> > > index 8a862f7..5dad5ac 100644
> > > --- a/drivers/staging/wlan-ng/cfg80211.c
> > > +++ b/drivers/staging/wlan-ng/cfg80211.c
> > > @@ -231,17 +231,12 @@ static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
> > > {
> > > struct wlandevice *wlandev = dev->ml_priv;
> > >
> > > - int err = 0;
> > > - int result = 0;
> > > -
> > > - result = prism2_domibset_uint32(wlandev,
> > > - DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > > - key_index);
> > > -
> > > - if (result)
> > > - err = -EFAULT;
> > > -
> > > - return err;
> > > + if (prism2_domibset_uint32(wlandev,
> > > + DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > > + key_index))
> > > + return -EFAULT;
> > > + else
> > > + return 0;
> >
> > We should just preserve the error codes from prism2_domibset_uint32().
> >
> > return prism2_domibset_uint32(dev->ml_priv,
> > DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > key_index);
> >
> prism2_domibset_uint32 function can return -ENODEV,-EPERM,-EBUSY if
> fail case.
>
> If we observe the pattern of calling this function,we can find
>
> "return -EFAULT on failure and 0 on success".
>
> Due to this we can not collect return status directly.
Yes, I know this code is full of nonsense.
It shouldn't just always return -EFAULT, it should preserve the correct
error code. This is only called from rdev_set_default_key() if you want
to check the caller.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] staging: wlan-ng: collect return status without variable
2019-05-10 18:40 ` Dan Carpenter
@ 2019-05-11 7:58 ` Hariprasad Kelam
0 siblings, 0 replies; 5+ messages in thread
From: Hariprasad Kelam @ 2019-05-11 7:58 UTC (permalink / raw)
To: Dan Carpenter, Greg Kroah-Hartman, Tim Collier, Chris Opperman,
Hariprasad Kelam, devel, linux-kernel
On Fri, May 10, 2019 at 09:40:11PM +0300, Dan Carpenter wrote:
> On Fri, May 10, 2019 at 10:53:08PM +0530, Hariprasad Kelam wrote:
> > On Fri, May 10, 2019 at 01:57:54PM +0300, Dan Carpenter wrote:
> > > On Fri, May 10, 2019 at 08:09:00AM +0530, Hariprasad Kelam wrote:
> > > > diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
> > > > index 8a862f7..5dad5ac 100644
> > > > --- a/drivers/staging/wlan-ng/cfg80211.c
> > > > +++ b/drivers/staging/wlan-ng/cfg80211.c
> > > > @@ -231,17 +231,12 @@ static int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
> > > > {
> > > > struct wlandevice *wlandev = dev->ml_priv;
> > > >
> > > > - int err = 0;
> > > > - int result = 0;
> > > > -
> > > > - result = prism2_domibset_uint32(wlandev,
> > > > - DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > > > - key_index);
> > > > -
> > > > - if (result)
> > > > - err = -EFAULT;
> > > > -
> > > > - return err;
> > > > + if (prism2_domibset_uint32(wlandev,
> > > > + DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > > > + key_index))
> > > > + return -EFAULT;
> > > > + else
> > > > + return 0;
> > >
> > > We should just preserve the error codes from prism2_domibset_uint32().
> > >
> > > return prism2_domibset_uint32(dev->ml_priv,
> > > DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID,
> > > key_index);
> > >
> > prism2_domibset_uint32 function can return -ENODEV,-EPERM,-EBUSY if
> > fail case.
> >
> > If we observe the pattern of calling this function,we can find
> >
> > "return -EFAULT on failure and 0 on success".
> >
> > Due to this we can not collect return status directly.
>
> Yes, I know this code is full of nonsense.
>
> It shouldn't just always return -EFAULT, it should preserve the correct
> error code. This is only called from rdev_set_default_key() if you want
> to check the caller.
>
> regards,
> dan carpenter
Yes , Caller not particular about -EFAULT,there is no
need of masking all errors with EFAULT in fail case.
We can directly collect the return status.
Will resend the patch with suggested changes
Thanks,
Hariprasad k
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-05-11 8:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-10 2:39 [PATCH] staging: wlan-ng: collect return status without variable Hariprasad Kelam
2019-05-10 10:57 ` Dan Carpenter
2019-05-10 17:23 ` Hariprasad Kelam
2019-05-10 18:40 ` Dan Carpenter
2019-05-11 7:58 ` Hariprasad Kelam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).