LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Shawn Guo <shawnguo@kernel.org>, Chris Healy <cphealy@gmail.com>,
Andrew Lunn <andrew@lunn.ch>, Fabio Estevam <festevam@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] ARM: dts: vf610-zii-dev: Add QSPI node
Date: Wed, 22 May 2019 00:20:52 -0700 [thread overview]
Message-ID: <20190522072052.2829-2-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190522072052.2829-1-andrew.smirnov@gmail.com>
Both rev C and rev B of the board come with two QSPI-NOR chips
attached to the SoC. Add DT code describing all of this.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
Changes since [v1]:
- Small spelling fixes in comment block
[v1] lore.kernel.org/r/20190513035909.30460-2-andrew.smirnov@gmail.com
arch/arm/boot/dts/vf610-zii-dev.dtsi | 48 ++++++++++++++++++++++++----
1 file changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 1f2e65ae2bd6..a1b4ccee2a10 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -177,6 +177,36 @@
status = "okay";
};
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ /*
+ * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+ * modes, so, spi-max-frequency is limited to 90MHz
+ */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+
+ flash@2 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <2>;
+ m25p,fast-read;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
@@ -360,12 +390,18 @@
pinctrl_qspi0: qspi0grp {
fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
>;
};
--
2.21.0
next prev parent reply other threads:[~2019-05-22 7:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-22 7:20 [PATCH v2 1/2] ARM: dts: vf610-zii-dev: Fix incorrect UART2 pin assignment Andrey Smirnov
2019-05-22 7:20 ` Andrey Smirnov [this message]
2019-05-23 12:56 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190522072052.2829-2-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=andrew@lunn.ch \
--cc=cphealy@gmail.com \
--cc=festevam@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
--subject='Re: [PATCH v2 2/2] ARM: dts: vf610-zii-dev: Add QSPI node' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).