LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Eric W. Biederman" <ebiederm@xmission.com>
To: linux-kernel@vger.kernel.org
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Linux Containers <containers@lists.linux-foundation.org>,
Oleg Nesterov <oleg@redhat.com>,
linux-arch@vger.kernel.org
Subject: [REVIEW][PATCH 00/26] signal: Remove task argument from force_sig_info
Date: Wed, 22 May 2019 19:38:50 -0500 [thread overview]
Message-ID: <20190523003916.20726-1-ebiederm@xmission.com> (raw)
Folks,
If folks can look this over and see if I have missed something I would
appreciate it.
The force_sig_info interface is designed to handle synchronous exceptions
like page faults. The locking in force_sig_info does not handle being
called on a remote task that is already running. It has been a long
standing problem over the years that it is not obvious to people that
restriction exists or that force_sig is for exceptions and they call it
somewhere inappropriate. A recently fixed example is
6376360ecbe5 ("mm: hwpoison: use do_send_sig_info() instead of force_sig()").
I was looking over the force_sig family of functions not long ago and
realized that there really are not that many cases where they are called
with on a process other than current and it is possible to remove the
current parameter, which should make it hard to make this mistake naively.
I found exactly two legitimate places where force_sig was being called on a
non-current task. On mips force_fcr31_sig is called in switch_to on next
the task that we are in the middle of making current. On parisc in
user_enable_single_step on a task that is stopped in a SIGKILL safe way in
ptrace. Both to my eyes appear to meet all of the criterion for being
safe to call from force_sig.
While reviewing that last ptrace case I found a funny corner case bug
of PTRACE_KILL, and so that fix is included in this patset as well.
Through "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
force_sig" the patches in this patchset are bug fixes. I don't think any
of them are urgent as they have existed for a long time, but definitely worth
fixes.
The rest of the changes are cleanups that carefully remove the task parameters
from the entire force_sig family of functions. Until at last force_sig_info
only takes a struct siginfo.
Eric W. Biederman (26):
signal: Correct namespace fixups of si_pid and si_uid
signal/ptrace: Simplify and fix PTRACE_KILL
signal/arm64: Use force_sig not force_sig_fault for SIGKILL
signal/drbd: Use send_sig not force_sig
signal/bpfilter: Fix bpfilter_kernl to use send_sig not force_sig
signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig
signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig
signal: Remove task parameter from force_sigsegv
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sig_mceerr
signal/x86: Remove task parameter from send_sigtrap
signal/um: Remove task parameter from send_sigtrap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/riscv: Remove tsk parameter from do_trap
signal/nds32: Remove tsk parameter from send_sigtrap
signal/arm: Remove tsk parameter from ptrace_break
signal/arm: Remove tsk parameter from __do_user_fault
signal/unicore32: Remove tsk parameter from __do_user_fault
signal: Explicitly call force_sig_fault on current
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Remove the task parameter from force_sig_fault
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Move the computation of force into send_signal and correct it.
signal: Generate the siginfo in force_sig
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Remove the signal number and task parameters from force_sig_info
arch/alpha/kernel/signal.c | 4 +-
arch/alpha/kernel/traps.c | 2 +-
arch/alpha/mm/fault.c | 4 +-
arch/arc/kernel/process.c | 4 +-
arch/arc/kernel/signal.c | 2 +-
arch/arc/kernel/traps.c | 2 +-
arch/arc/mm/fault.c | 4 +-
arch/arm/include/asm/traps.h | 2 +-
arch/arm/kernel/ptrace.c | 6 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm/kernel/traps.c | 4 +-
arch/arm/mm/alignment.c | 2 +-
arch/arm/mm/fault.c | 13 +-
arch/arm64/kernel/traps.c | 9 +-
arch/c6x/kernel/signal.c | 2 +-
arch/c6x/kernel/traps.c | 2 +-
arch/csky/abiv1/alignment.c | 2 +-
arch/csky/abiv2/fpu.c | 2 +-
arch/csky/kernel/signal.c | 4 +-
arch/csky/kernel/traps.c | 2 +-
arch/csky/mm/fault.c | 4 +-
arch/h8300/kernel/ptrace_h.c | 4 +-
arch/h8300/kernel/ptrace_s.c | 2 +-
arch/h8300/kernel/signal.c | 2 +-
arch/hexagon/kernel/signal.c | 2 +-
arch/hexagon/kernel/traps.c | 12 +-
arch/hexagon/mm/vm_fault.c | 4 +-
arch/ia64/kernel/brl_emu.c | 6 +-
arch/ia64/kernel/signal.c | 8 +-
arch/ia64/kernel/traps.c | 24 +--
arch/ia64/kernel/unaligned.c | 2 +-
arch/ia64/mm/fault.c | 2 +-
arch/m68k/kernel/signal.c | 4 +-
arch/m68k/kernel/traps.c | 20 +--
arch/m68k/mm/fault.c | 4 +-
arch/microblaze/kernel/exceptions.c | 2 +-
arch/microblaze/kernel/signal.c | 2 +-
arch/microblaze/mm/fault.c | 2 +-
arch/mips/kernel/branch.c | 18 +--
arch/mips/kernel/kprobes.c | 2 +-
arch/mips/kernel/signal.c | 8 +-
arch/mips/kernel/signal_n32.c | 4 +-
arch/mips/kernel/signal_o32.c | 8 +-
arch/mips/kernel/traps.c | 50 +++---
arch/mips/kernel/unaligned.c | 20 +--
arch/mips/mm/fault.c | 4 +-
arch/mips/sgi-ip22/ip22-berr.c | 2 +-
arch/mips/sgi-ip22/ip28-berr.c | 2 +-
arch/mips/sgi-ip27/ip27-berr.c | 2 +-
arch/mips/sgi-ip32/ip32-berr.c | 2 +-
arch/nds32/kernel/fpu.c | 2 +-
arch/nds32/kernel/signal.c | 2 +-
arch/nds32/kernel/traps.c | 17 +-
arch/nds32/mm/fault.c | 4 +-
arch/nios2/kernel/signal.c | 4 +-
arch/nios2/kernel/traps.c | 2 +-
arch/openrisc/kernel/signal.c | 2 +-
arch/openrisc/kernel/traps.c | 12 +-
arch/openrisc/mm/fault.c | 4 +-
arch/parisc/kernel/ptrace.c | 6 +-
arch/parisc/kernel/signal.c | 2 +-
arch/parisc/kernel/traps.c | 14 +-
arch/parisc/kernel/unaligned.c | 4 +-
arch/parisc/math-emu/driver.c | 2 +-
arch/parisc/mm/fault.c | 4 +-
arch/powerpc/kernel/process.c | 2 +-
arch/powerpc/kernel/signal_32.c | 6 +-
arch/powerpc/kernel/signal_64.c | 2 +-
arch/powerpc/kernel/traps.c | 4 +-
arch/powerpc/mm/fault.c | 5 +-
arch/powerpc/platforms/cell/spufs/fault.c | 9 +-
arch/powerpc/platforms/cell/spufs/run.c | 2 +-
arch/riscv/include/asm/bug.h | 2 +-
arch/riscv/kernel/signal.c | 2 +-
arch/riscv/kernel/traps.c | 11 +-
arch/riscv/mm/fault.c | 6 +-
arch/s390/kernel/compat_signal.c | 4 +-
arch/s390/kernel/signal.c | 4 +-
arch/s390/kernel/traps.c | 6 +-
arch/s390/mm/fault.c | 6 +-
arch/sh/kernel/cpu/sh2a/fpu.c | 2 +-
arch/sh/kernel/cpu/sh4/fpu.c | 2 +-
arch/sh/kernel/cpu/sh5/fpu.c | 4 +-
arch/sh/kernel/hw_breakpoint.c | 2 +-
arch/sh/kernel/ptrace_64.c | 4 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sh/kernel/signal_64.c | 4 +-
arch/sh/kernel/traps.c | 4 +-
arch/sh/kernel/traps_32.c | 10 +-
arch/sh/kernel/traps_64.c | 2 +-
arch/sh/math-emu/math.c | 2 +-
arch/sh/mm/fault.c | 11 +-
arch/sparc/kernel/process_64.c | 4 +-
arch/sparc/kernel/signal32.c | 8 +-
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 8 +-
arch/sparc/kernel/sys_sparc_32.c | 2 +-
arch/sparc/kernel/sys_sparc_64.c | 2 +-
arch/sparc/kernel/traps_32.c | 4 +-
arch/sparc/kernel/traps_64.c | 41 +++--
arch/sparc/mm/fault_32.c | 4 +-
arch/sparc/mm/fault_64.c | 2 +-
arch/um/kernel/exec.c | 2 +-
arch/um/kernel/ptrace.c | 7 +-
arch/um/kernel/skas/mmu.c | 2 +-
arch/um/kernel/tlb.c | 4 +-
arch/um/kernel/trap.c | 16 +-
arch/unicore32/kernel/signal.c | 4 +-
arch/unicore32/kernel/traps.c | 2 +-
arch/unicore32/mm/fault.c | 13 +-
arch/x86/entry/vsyscall/vsyscall_64.c | 4 +-
arch/x86/include/asm/ptrace.h | 3 +-
arch/x86/kernel/cpu/mce/core.c | 2 +-
arch/x86/kernel/ptrace.c | 9 +-
arch/x86/kernel/signal.c | 2 +-
arch/x86/kernel/traps.c | 10 +-
arch/x86/kernel/umip.c | 2 +-
arch/x86/kernel/uprobes.c | 2 +-
arch/x86/kernel/vm86_32.c | 2 +-
arch/x86/mm/fault.c | 9 +-
arch/x86/mm/mpx.c | 2 +-
arch/x86/um/signal.c | 4 +-
arch/xtensa/kernel/signal.c | 2 +-
arch/xtensa/kernel/traps.c | 8 +-
arch/xtensa/mm/fault.c | 4 +-
drivers/block/drbd/drbd_int.h | 2 +-
drivers/block/drbd/drbd_main.c | 2 +-
drivers/block/drbd/drbd_nl.c | 2 +-
drivers/misc/lkdtm/bugs.c | 2 +-
fs/cifs/connect.c | 2 +-
fs/exec.c | 2 +-
include/linux/ptrace.h | 2 +-
include/linux/sched/signal.h | 13 +-
include/linux/syscalls.h | 2 +-
kernel/events/uprobes.c | 4 +-
kernel/pid_namespace.c | 2 +-
kernel/ptrace.c | 43 +++--
kernel/rseq.c | 4 +-
kernel/seccomp.c | 2 +-
kernel/signal.c | 182 ++++++++++++++--------
mm/memory-failure.c | 2 +-
net/bpfilter/bpfilter_kern.c | 2 +-
security/safesetid/lsm.c | 4 +-
143 files changed, 510 insertions(+), 465 deletions(-)
--
2.21.0
next reply other threads:[~2019-05-23 0:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-23 0:38 Eric W. Biederman [this message]
2019-05-23 0:38 ` [REVIEW][PATCH 01/26] signal: Correct namespace fixups of si_pid and si_uid Eric W. Biederman
[not found] ` <20190529131503.F2AC221871@mail.kernel.org>
2019-05-29 15:18 ` Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 02/26] signal/ptrace: Simplify and fix PTRACE_KILL Eric W. Biederman
2019-05-29 14:35 ` Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 03/26] signal/arm64: Use force_sig not force_sig_fault for SIGKILL Eric W. Biederman
2019-05-23 10:17 ` Will Deacon
2019-05-23 14:59 ` Eric W. Biederman
2019-05-23 16:11 ` [REVIEW][PATCHv2 " Eric W. Biederman
2019-05-23 16:15 ` Will Deacon
2019-05-23 20:59 ` Eric W. Biederman
2019-05-24 10:00 ` Will Deacon
2019-05-24 22:36 ` Eric W. Biederman
2019-05-29 15:12 ` Will Deacon
2019-05-29 15:34 ` Eric W. Biederman
2019-05-23 10:21 ` [REVIEW][PATCH " Dave Martin
2019-05-23 14:53 ` Eric W. Biederman
2019-05-23 16:12 ` Dave P Martin
2019-05-23 21:00 ` Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 04/26] signal/drbd: Use send_sig not force_sig Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 05/26] signal/bpfilter: Fix bpfilter_kernl to use " Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 06/26] signal/pid_namespace: Fix reboot_pid_ns " Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 07/26] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 08/26] signal: Remove task parameter from force_sigsegv Eric W. Biederman
2019-05-23 0:38 ` [REVIEW][PATCH 09/26] signal: Remove task parameter from force_sig Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 10/26] signal: Remove task parameter from force_sig_mceerr Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 11/26] signal/x86: Remove task parameter from send_sigtrap Eric W. Biederman
2019-05-28 18:18 ` Thomas Gleixner
2019-05-23 0:39 ` [REVIEW][PATCH 12/26] signal/um: " Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 13/26] signal/sh: Remove tsk parameter from force_sig_info_fault Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 14/26] signal/riscv: Remove tsk parameter from do_trap Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 15/26] signal/nds32: Remove tsk parameter from send_sigtrap Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 16/26] signal/arm: Remove tsk parameter from ptrace_break Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 17/26] signal/arm: Remove tsk parameter from __do_user_fault Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 18/26] signal/unicore32: " Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 19/26] signal: Explicitly call force_sig_fault on current Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 20/26] signal: Use force_sig_fault_to_task for the two calls that don't deliver to current Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 21/26] signal: Remove the task parameter from force_sig_fault Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 22/26] signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 23/26] signal: Move the computation of force into send_signal and correct it Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 24/26] signal: Generate the siginfo in force_sig Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 25/26] signal: Factor force_sig_info_to_task out of force_sig_info Eric W. Biederman
2019-05-23 0:39 ` [REVIEW][PATCH 26/26] signal: Remove the signal number and task parameters from force_sig_info Eric W. Biederman
2019-05-24 23:35 ` [REVIEW][PATCH 00/26] signal: Remove task argument " Eric W. Biederman
2019-05-29 15:37 ` Eric W. Biederman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190523003916.20726-1-ebiederm@xmission.com \
--to=ebiederm@xmission.com \
--cc=containers@lists.linux-foundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg@redhat.com \
--subject='Re: [REVIEW][PATCH 00/26] signal: Remove task argument from force_sig_info' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).