LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
To: joro@8bytes.org, alex.williamson@redhat.com
Cc: jacob.jun.pan@linux.intel.com, eric.auger@redhat.com,
	ashok.raj@intel.com, yi.l.liu@linux.intel.com,
	robdclark@gmail.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org
Subject: [PATCH 2/4] iommu: Introduce device fault data
Date: Thu, 23 May 2019 19:06:11 +0100	[thread overview]
Message-ID: <20190523180613.55049-3-jean-philippe.brucker@arm.com> (raw)
In-Reply-To: <20190523180613.55049-1-jean-philippe.brucker@arm.com>

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

Device faults detected by IOMMU can be reported outside the IOMMU
subsystem for further processing. This patch introduces
a generic device fault data structure.

The fault can be either an unrecoverable fault or a page request,
also referred to as a recoverable fault.

We only care about non internal faults that are likely to be reported
to an external subsystem.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Liu, Yi L <yi.l.liu@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
 include/linux/iommu.h      |  43 ++++++++++++++
 include/uapi/linux/iommu.h | 118 +++++++++++++++++++++++++++++++++++++
 2 files changed, 161 insertions(+)
 create mode 100644 include/uapi/linux/iommu.h

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index a815cf6f6f47..d442f5f3fa93 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <uapi/linux/iommu.h>
 
 #define IOMMU_READ	(1 << 0)
 #define IOMMU_WRITE	(1 << 1)
@@ -49,6 +50,7 @@ struct device;
 struct iommu_domain;
 struct notifier_block;
 struct iommu_sva;
+struct iommu_fault_event;
 
 /* iommu fault flags */
 #define IOMMU_FAULT_READ	0x0
@@ -58,6 +60,7 @@ typedef int (*iommu_fault_handler_t)(struct iommu_domain *,
 			struct device *, unsigned long, int, void *);
 typedef int (*iommu_mm_exit_handler_t)(struct device *dev, struct iommu_sva *,
 				       void *);
+typedef int (*iommu_dev_fault_handler_t)(struct iommu_fault_event *, void *);
 
 struct iommu_domain_geometry {
 	dma_addr_t aperture_start; /* First address that can be mapped    */
@@ -301,6 +304,45 @@ struct iommu_device {
 	struct device *dev;
 };
 
+/**
+ * struct iommu_fault_event - Generic fault event
+ *
+ * Can represent recoverable faults such as a page requests or
+ * unrecoverable faults such as DMA or IRQ remapping faults.
+ *
+ * @fault: fault descriptor
+ * @iommu_private: used by the IOMMU driver for storing fault-specific
+ *                 data. Users should not modify this field before
+ *                 sending the fault response.
+ */
+struct iommu_fault_event {
+	struct iommu_fault fault;
+	u64 iommu_private;
+};
+
+/**
+ * struct iommu_fault_param - per-device IOMMU fault data
+ * @handler: Callback function to handle IOMMU faults at device level
+ * @data: handler private data
+ */
+struct iommu_fault_param {
+	iommu_dev_fault_handler_t handler;
+	void *data;
+};
+
+/**
+ * struct iommu_param - collection of per-device IOMMU data
+ *
+ * @fault_param: IOMMU detected device fault reporting data
+ *
+ * TODO: migrate other per device data pointers under iommu_dev_data, e.g.
+ *	struct iommu_group	*iommu_group;
+ *	struct iommu_fwspec	*iommu_fwspec;
+ */
+struct iommu_param {
+	struct iommu_fault_param *fault_param;
+};
+
 int  iommu_device_register(struct iommu_device *iommu);
 void iommu_device_unregister(struct iommu_device *iommu);
 int  iommu_device_sysfs_add(struct iommu_device *iommu,
@@ -504,6 +546,7 @@ struct iommu_ops {};
 struct iommu_group {};
 struct iommu_fwspec {};
 struct iommu_device {};
+struct iommu_fault_param {};
 
 static inline bool iommu_present(struct bus_type *bus)
 {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
new file mode 100644
index 000000000000..796402174d6c
--- /dev/null
+++ b/include/uapi/linux/iommu.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * IOMMU user API definitions
+ */
+
+#ifndef _UAPI_IOMMU_H
+#define _UAPI_IOMMU_H
+
+#include <linux/types.h>
+
+#define IOMMU_FAULT_PERM_READ	(1 << 0) /* read */
+#define IOMMU_FAULT_PERM_WRITE	(1 << 1) /* write */
+#define IOMMU_FAULT_PERM_EXEC	(1 << 2) /* exec */
+#define IOMMU_FAULT_PERM_PRIV	(1 << 3) /* privileged */
+
+/* Generic fault types, can be expanded IRQ remapping fault */
+enum iommu_fault_type {
+	IOMMU_FAULT_DMA_UNRECOV = 1,	/* unrecoverable fault */
+	IOMMU_FAULT_PAGE_REQ,		/* page request fault */
+};
+
+enum iommu_fault_reason {
+	IOMMU_FAULT_REASON_UNKNOWN = 0,
+
+	/* Could not access the PASID table (fetch caused external abort) */
+	IOMMU_FAULT_REASON_PASID_FETCH,
+
+	/* PASID entry is invalid or has configuration errors */
+	IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+
+	/*
+	 * PASID is out of range (e.g. exceeds the maximum PASID
+	 * supported by the IOMMU) or disabled.
+	 */
+	IOMMU_FAULT_REASON_PASID_INVALID,
+
+	/*
+	 * An external abort occurred fetching (or updating) a translation
+	 * table descriptor
+	 */
+	IOMMU_FAULT_REASON_WALK_EABT,
+
+	/*
+	 * Could not access the page table entry (Bad address),
+	 * actual translation fault
+	 */
+	IOMMU_FAULT_REASON_PTE_FETCH,
+
+	/* Protection flag check failed */
+	IOMMU_FAULT_REASON_PERMISSION,
+
+	/* access flag check failed */
+	IOMMU_FAULT_REASON_ACCESS,
+
+	/* Output address of a translation stage caused Address Size fault */
+	IOMMU_FAULT_REASON_OOR_ADDRESS,
+};
+
+/**
+ * struct iommu_fault_unrecoverable - Unrecoverable fault data
+ * @reason: reason of the fault, from &enum iommu_fault_reason
+ * @flags: parameters of this fault (IOMMU_FAULT_UNRECOV_* values)
+ * @pasid: Process Address Space ID
+ * @perm: requested permission access using by the incoming transaction
+ *        (IOMMU_FAULT_PERM_* values)
+ * @addr: offending page address
+ * @fetch_addr: address that caused a fetch abort, if any
+ */
+struct iommu_fault_unrecoverable {
+	__u32	reason;
+#define IOMMU_FAULT_UNRECOV_PASID_VALID		(1 << 0)
+#define IOMMU_FAULT_UNRECOV_ADDR_VALID		(1 << 1)
+#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID	(1 << 2)
+	__u32	flags;
+	__u32	pasid;
+	__u32	perm;
+	__u64	addr;
+	__u64	fetch_addr;
+};
+
+/**
+ * struct iommu_fault_page_request - Page Request data
+ * @flags: encodes whether the corresponding fields are valid and whether this
+ *         is the last page in group (IOMMU_FAULT_PAGE_REQUEST_* values)
+ * @pasid: Process Address Space ID
+ * @grpid: Page Request Group Index
+ * @perm: requested page permissions (IOMMU_FAULT_PERM_* values)
+ * @addr: page address
+ * @private_data: device-specific private information
+ */
+struct iommu_fault_page_request {
+#define IOMMU_FAULT_PAGE_REQUEST_PASID_VALID	(1 << 0)
+#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE	(1 << 1)
+#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA	(1 << 2)
+	__u32	flags;
+	__u32	pasid;
+	__u32	grpid;
+	__u32	perm;
+	__u64	addr;
+	__u64	private_data[2];
+};
+
+/**
+ * struct iommu_fault - Generic fault data
+ * @type: fault type from &enum iommu_fault_type
+ * @padding: reserved for future use (should be zero)
+ * @event: fault event, when @type is %IOMMU_FAULT_DMA_UNRECOV
+ * @prm: Page Request message, when @type is %IOMMU_FAULT_PAGE_REQ
+ */
+struct iommu_fault {
+	__u32	type;
+	__u32	padding;
+	union {
+		struct iommu_fault_unrecoverable event;
+		struct iommu_fault_page_request prm;
+	};
+};
+#endif /* _UAPI_IOMMU_H */
-- 
2.21.0


  parent reply	other threads:[~2019-05-23 18:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-23 18:06 [PATCH 0/4] iommu: Add device fault reporting API Jean-Philippe Brucker
2019-05-23 18:06 ` [PATCH 1/4] driver core: Add per device iommu param Jean-Philippe Brucker
2019-05-23 18:06 ` Jean-Philippe Brucker [this message]
2019-05-23 18:43   ` [PATCH 2/4] iommu: Introduce device fault data Robin Murphy
2019-05-24 13:49     ` Jacob Pan
2019-05-24 16:14       ` Jean-Philippe Brucker
2019-05-24 17:44         ` Jacob Pan
2019-05-23 18:06 ` [PATCH 3/4] iommu: Introduce device fault report API Jean-Philippe Brucker
2019-05-23 18:56   ` Robin Murphy
2019-05-24 18:00     ` Jacob Pan
2019-05-31 13:37     ` Jean-Philippe Brucker
2019-05-23 18:06 ` [PATCH 4/4] iommu: Add recoverable fault reporting Jean-Philippe Brucker
2019-05-24 18:14   ` Jacob Pan
2019-05-31 11:05     ` Jean-Philippe Brucker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190523180613.55049-3-jean-philippe.brucker@arm.com \
    --to=jean-philippe.brucker@arm.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=eric.auger@redhat.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=yi.l.liu@linux.intel.com \
    --subject='Re: [PATCH 2/4] iommu: Introduce device fault data' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).