[PATCH 4.19 000/276] 4.19.47-stable review

[PATCH 4.19 000/276] 4.19.47-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.47 release.
There are 276 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 01 Jun 2019 03:02:08 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.47-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.47-rc1

Benjamin Coddington <bcodding@redhat.com>
    NFS: Fix a double unlock from nfs_match,get_client

Maxime Ripard <maxime.ripard@bootlin.com>
    drm/sun4i: dsi: Enforce boundaries on the start delay

Farhan Ali <alifm@linux.ibm.com>
    vfio-ccw: Prevent quiesce function going into an infinite loop

Maxime Ripard <maxime.ripard@bootlin.com>
    drm/sun4i: dsi: Change the start delay calculation

Chris Wilson <chris@chris-wilson.co.uk>
    drm: Wake up next in drm_read() chain if we are forced to putback the event

Noralf Trønnes <noralf@tronnes.org>
    drm/drv: Hold ref on parent device during drm_device lifetime

Eric Anholt <eric@anholt.net>
    drm/v3d: Handle errors from IRQ setup.

Arnd Bergmann <arnd@arndb.de>
    ASoC: davinci-mcasp: Fix clang warning without CONFIG_PM

Chris Lesiak <chris.lesiak@licor.com>
    spi: Fix zero length xfer bug

Trent Piepho <tpiepho@impinj.com>
    spi: imx: stop buffer overflow in RX FIFO flush

Geert Uytterhoeven <geert+renesas@glider.be>
    spi: rspi: Fix sequencer reset during initialization

Tony Lindgren <tony@atomide.com>
    drm/omap: dsi: Fix PM for display blank with paired dss_pll calls

Aditya Pakki <pakki001@umn.edu>
    spi : spi-topcliff-pch: Fix to handle empty DMA buffers

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix SLI3 commands being issued on SLI4 devices

Arnd Bergmann <arnd@arndb.de>
    media: saa7146: avoid high stack usage with clang

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix fc4type information for FDMI

James Smart <jsmart2021@gmail.com>
    scsi: lpfc: Fix FDMI manufacturer attribute value

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: vimc: zero the media_device on probe

Arnd Bergmann <arnd@arndb.de>
    media: go7007: avoid clang frame overflow warning with KASAN

Hans Verkuil <hverkuil-cisco@xs4all.nl>
    media: gspca: do not resubmit URBs when streaming has stopped

Helen Fornazier <helen.koike@collabora.com>
    media: vimc: stream: fix thread state before sleep

Kangjie Lu <kjlu@umn.edu>
    scsi: ufs: fix a missing check of devm_reset_control_get

Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
    drm/amd/display: Set stream->mode_changed when connectors change

Murton Liu <murton.liu@amd.com>
    drm/amd/display: Fix Divide by 0 in memory calculations

Arnd Bergmann <arnd@arndb.de>
    media: staging: davinci_vpfe: disallow building with COMPILE_TEST

James Hutchinson <jahutchinson99@googlemail.com>
    media: m88ds3103: serialize reset messages in m88ds3103_set_frontend

Stefan Brüns <stefan.bruens@rwth-aachen.de>
    media: dvbsky: Avoid leaking dvb frontend

Kangjie Lu <kjlu@umn.edu>
    media: si2165: fix a missing check of return value

Kai-Heng Feng <kai.heng.feng@canonical.com>
    igb: Exclude device from suspend direct complete optimization

Noralf Trønnes <noralf@tronnes.org>
    tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers

Kai-Heng Feng <kai.heng.feng@canonical.com>
    e1000e: Disable runtime PM on CNP+

Kangjie Lu <kjlu@umn.edu>
    thunderbolt: property: Fix a NULL pointer dereference

Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
    drm/amd/display: fix releasing planes when exiting odm

Aditya Pakki <pakki001@umn.edu>
    thunderbolt: Fix to check for kmemdup failure

Aditya Pakki <pakki001@umn.edu>
    thunderbolt: Fix to check return value of ida_simple_get

Rouven Czerwinski <r.czerwinski@pengutronix.de>
    hwrng: omap - Set default quality

Sameer Pujar <spujar@nvidia.com>
    dmaengine: tegra210-adma: use devm_clk_*() helpers

Linus Lüssing <linus.luessing@c0d3.blue>
    batman-adv: allow updating DAT entry timeouts on incoming ARP Replies

Arnd Bergmann <arnd@arndb.de>
    selinux: avoid uninitialized variable warning

Arnd Bergmann <arnd@arndb.de>
    scsi: lpfc: avoid uninitialized variable warning

Arnd Bergmann <arnd@arndb.de>
    scsi: qla4xxx: avoid freeing unallocated dma memory

Tony Lindgren <tony@atomide.com>
    usb: core: Add PM runtime calls to usb_hcd_platform_shutdown

Paul E. McKenney <paulmck@linux.ibm.com>
    rcuperf: Fix cleanup path for invalid perf_type strings

Yazen Ghannam <yazen.ghannam@amd.com>
    x86/mce: Handle varying MCA bank counts

Paul E. McKenney <paulmck@linux.ibm.com>
    rcutorture: Fix cleanup path for invalid torture_type strings

Tony Luck <tony.luck@intel.com>
    x86/mce: Fix machine_check_poll() tests for error types

Leon Romanovsky <leon@kernel.org>
    overflow: Fix -Wtype-limits compilation warnings

Kangjie Lu <kjlu@umn.edu>
    tty: ipwireless: fix missing checks for ioremap

Pankaj Gupta <pagupta@redhat.com>
    virtio_console: initialize vtermno value for ports

Chad Dupuis <cdupuis@marvell.com>
    scsi: qedf: Add missing return in qedf_post_io_req() in the fcport offload check

Thomas Gleixner <tglx@linutronix.de>
    timekeeping: Force upper bound for setting CLOCK_REALTIME

Aditya Pakki <pakki001@umn.edu>
    thunderbolt: Fix to check the return value of kmemdup

Kangjie Lu <kjlu@umn.edu>
    thunderbolt: property: Fix a missing check of kzalloc

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    efifb: Omit memory map check on legacy boot

Ezequiel Garcia <ezequiel@collabora.com>
    media: gspca: Kill URBs on USB device disconnect

Dan Carpenter <dan.carpenter@oracle.com>
    media: wl128x: prevent two potential buffer overflows

Kangjie Lu <kjlu@umn.edu>
    media: video-mux: fix null pointer dereferences

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    kobject: Don't trigger kobject_uevent(KOBJ_REMOVE) twice.

Sowjanya Komatineni <skomatineni@nvidia.com>
    spi: tegra114: reset controller on probe

Hans de Goede <hdegoede@redhat.com>
    HID: logitech-hidpp: change low battery level threshold from 31 to 30 percent

Gustavo A. R. Silva <gustavo@embeddedor.com>
    cxgb3/l2t: Fix undefined behaviour

Wen Yang <wen.yang99@zte.com.cn>
    ASoC: fsl_utils: fix a leaked reference by adding missing of_node_put

Wen Yang <wen.yang99@zte.com.cn>
    ASoC: eukrea-tlv320: fix a leaked reference by adding missing of_node_put

Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
    HID: core: move Usage Page concatenation to Main item

Geert Uytterhoeven <geert+renesas@glider.be>
    sh: sh7786: Add explicit I/O cast to sh7786_mm_sel()

Leon Romanovsky <leon@kernel.org>
    RDMA/hns: Fix bad endianess of port_pd variable

Chengguang Xu <cgxu519@gmx.com>
    chardev: add additional check for minor range overlap

Peter Zijlstra <peterz@infradead.org>
    x86/uaccess: Fix up the fixup

Peter Zijlstra <peterz@infradead.org>
    x86/ia32: Fix ia32_restore_sigcontext() AC leak

Peter Zijlstra <peterz@infradead.org>
    x86/uaccess, signal: Fix AC=1 bloat

Peter Zijlstra <peterz@infradead.org>
    x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP

Lior David <liord@codeaurora.org>
    wil6210: fix return code of wmi_mgmt_tx and wmi_mgmt_tx_ext

Wen Yang <wen.yang99@zte.com.cn>
    arm64: cpu_ops: fix a leaked reference by adding missing of_node_put

Yannick Fertré <yannick.fertre@st.com>
    drm/panel: otm8009a: Add delay at the end of initialization

Stanley Chu <stanley.chu@mediatek.com>
    scsi: ufs: Avoid configuring regulator with undefined voltage range

Stanley Chu <stanley.chu@mediatek.com>
    scsi: ufs: Fix regulator load and icc-level configuration

Ping-Ke Shih <pkshih@realtek.com>
    rtlwifi: fix potential NULL pointer dereference

Alexandre Belloni <alexandre.belloni@bootlin.com>
    rtc: xgene: fix possible race condition

Piotr Figiel <p.figiel@camlintechnologies.com>
    brcmfmac: fix Oops when bringing up interface during USB disconnect

Piotr Figiel <p.figiel@camlintechnologies.com>
    brcmfmac: fix race during disconnect when USB completion is in progress

Piotr Figiel <p.figiel@camlintechnologies.com>
    brcmfmac: fix WARNING during USB disconnect in case of unempty psq

Piotr Figiel <p.figiel@camlintechnologies.com>
    brcmfmac: convert dev_init_lock mutex to completion

Arnd Bergmann <arnd@arndb.de>
    b43: shut up clang -Wuninitialized variable warning

Kangjie Lu <kjlu@umn.edu>
    brcmfmac: fix missing checks for kmemdup

YueHaibing <yuehaibing@huawei.com>
    mwifiex: Fix mem leak in mwifiex_tm_cmd

Kangjie Lu <kjlu@umn.edu>
    rtlwifi: fix a potential NULL pointer dereference

Daniel T. Lee <danieltimlee@gmail.com>
    selftests/bpf: ksym_search won't check symbols exists

Justin Chen <justinpopo6@gmail.com>
    iio: adc: ti-ads7950: Fix improper use of mlock

Nathan Chancellor <natechancellor@gmail.com>
    iio: common: ssp_sensors: Initialize calculated_time in ssp_common_process_data

Kangjie Lu <kjlu@umn.edu>
    iio: hmc5843: fix potential NULL pointer dereferences

Lars-Peter Clausen <lars@metafoo.de>
    iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion

Wen Yang <wen.yang99@zte.com.cn>
    drm/pl111: fix possible object reference leak

Kees Cook <keescook@chromium.org>
    x86/build: Keep local relocations with ld.lld

David Kozub <zub@linux.fjfi.cvut.cz>
    block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBR

Wen Yang <wen.yang99@zte.com.cn>
    cpufreq: kirkwood: fix possible object reference leak

Wen Yang <wen.yang99@zte.com.cn>
    cpufreq: pmac32: fix possible object reference leak

Wen Yang <wen.yang99@zte.com.cn>
    cpufreq/pasemi: fix possible object reference leak

Wen Yang <wen.yang99@zte.com.cn>
    cpufreq: ppc_cbe: fix possible object reference leak

Kristian Evensen <kristian.evensen@gmail.com>
    qmi_wwan: Add quirk for Quectel dynamic config

Roman Gushchin <guro@fb.com>
    selftests: cgroup: fix cleanup path in test_memcg_subtree_control()

Arnd Bergmann <arnd@arndb.de>
    s390: cio: fix cio_irb declaration

Thomas Huth <thuth@redhat.com>
    s390/mm: silence compiler warning when compiling without CONFIG_PGSTE

Borislav Petkov <bp@suse.de>
    x86/microcode: Fix the ancient deprecated microcode loading method

Arnd Bergmann <arnd@arndb.de>
    s390: zcrypt: initialize variables before_use

Douglas Anderson <dianders@chromium.org>
    clk: rockchip: Make rkpwm a critical clock on rk3288

Charles Keepax <ckeepax@opensource.cirrus.com>
    extcon: arizona: Disable mic detect if running when driver is removed

Douglas Anderson <dianders@chromium.org>
    clk: rockchip: Fix video codec clocks on rk3288

Ulf Hansson <ulf.hansson@linaro.org>
    PM / core: Propagate dev->power.wakeup_path when no callbacks

Christian König <christian.koenig@amd.com>
    drm/amdgpu: fix old fence check in amdgpu_fence_emit

Yinbo Zhu <yinbo.zhu@nxp.com>
    mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support

Yinbo Zhu <yinbo.zhu@nxp.com>
    mmc: sdhci-of-esdhc: add erratum A-009204 support

Yinbo Zhu <yinbo.zhu@nxp.com>
    mmc: sdhci-of-esdhc: add erratum eSDHC5 support

Kangjie Lu <kjlu@umn.edu>
    mmc_spi: add a status check for spi_sync_locked

Andrea Merello <andrea.merello@gmail.com>
    mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers

John Garry <john.garry@huawei.com>
    scsi: libsas: Do discovery on empty PHY to update PHY info

Guenter Roeck <linux@roeck-us.net>
    hwmon: (f71805f) Use request_muxed_region for Super-IO accesses

Guenter Roeck <linux@roeck-us.net>
    hwmon: (pc87427) Use request_muxed_region for Super-IO accesses

Guenter Roeck <linux@roeck-us.net>
    hwmon: (smsc47b397) Use request_muxed_region for Super-IO accesses

Guenter Roeck <linux@roeck-us.net>
    hwmon: (smsc47m1) Use request_muxed_region for Super-IO accesses

Guenter Roeck <linux@roeck-us.net>
    hwmon: (vt1211) Use request_muxed_region for Super-IO accesses

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel/cstate: Add Icelake support

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel/rapl: Add Icelake support

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/msr: Add Icelake support

Colin Ian King <colin.king@canonical.com>
    RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure

Vincenzo Frascino <vincenzo.frascino@arm.com>
    arm64: vdso: Fix clock_getres() for CLOCK_REALTIME

Kefeng Wang <wangkefeng.wang@huawei.com>
    ACPI/IORT: Reject platform device creation on NUMA node mapping failure

Nicholas Nunley <nicholas.d.nunley@intel.com>
    i40e: don't allow changes to HW VLAN stripping on active port VLANs

Adam Ludkiewicz <adam.ludkiewicz@intel.com>
    i40e: Able to add up to 16 MAC filters on an untrusted VF

Arnd Bergmann <arnd@arndb.de>
    phy: mapphone-mdm6600: add gpiolib dependency

Paul Kocialkowski <paul.kocialkowski@bootlin.com>
    phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

Russell King <rmk+kernel@armlinux.org.uk>
    drm: etnaviv: avoid DMA API warning when importing buffers

Thomas Gleixner <tglx@linutronix.de>
    x86/irq/64: Limit IST stack overflow check to #DB stack

Alan Stern <stern@rowland.harvard.edu>
    USB: core: Don't unbind interfaces following device reset failure

Julian Wiedmann <jwi@linux.ibm.com>
    s390/qeth: handle error from qeth_update_from_chp_desc()

Mika Westerberg <mika.westerberg@linux.intel.com>
    thunderbolt: Take domain lock in switch sysfs attribute callbacks

Nicholas Piggin <npiggin@gmail.com>
    irq_work: Do not raise an IPI when queueing work on the local CPU

Wen Yang <wen.yang99@zte.com.cn>
    drm/msm: a5xx: fix possible object reference leak

Nicholas Mc Guire <hofrat@osadl.org>
    staging: vc04_services: handle kzalloc failure

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    sched/core: Handle overflow in cpu_shares_write_u64

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    sched/rt: Check integer overflow at usec to nsec conversion

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    sched/core: Check quota and period overflow at usec to nsec conversion

Roman Gushchin <guro@fb.com>
    cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    random: add a spinlock_t to struct batched_entropy

Jon DeVree <nuxi@vault24.org>
    random: fix CRNG initialization when random.trust_cpu=1

Russell Currey <ruscur@russell.cc>
    powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX

Nathan Lynch <nathanl@linux.ibm.com>
    powerpc/numa: improve control of topology updates

Yufen Yu <yuyufen@huawei.com>
    block: fix use-after-free on gendisk

Fabrice Gasnier <fabrice.gasnier@st.com>
    iio: adc: stm32-dfsdm: fix unmet direct dependencies detected

Dan Carpenter <dan.carpenter@oracle.com>
    media: pvrusb2: Prevent a buffer overflow

Shuah Khan <shuah@kernel.org>
    media: au0828: Fix NULL pointer dereference in au0828_analog_stream_enable()

Hugues Fruchet <hugues.fruchet@st.com>
    media: stm32-dcmi: fix crash when subdev do not expose any formats

Wenwen Wang <wang6495@umn.edu>
    audit: fix a memory leak bug

Akinobu Mita <akinobu.mita@gmail.com>
    media: ov2659: make S_FMT succeed even if requested format doesn't match

Hans Verkuil <hverkuil@xs4all.nl>
    media: au0828: stop video streaming only when last user stops

Janusz Krzysztofik <jmkrzyszt@gmail.com>
    media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper

Philipp Zabel <p.zabel@pengutronix.de>
    media: coda: clear error return value before picture run

Nicolas Ferre <nicolas.ferre@microchip.com>
    dmaengine: at_xdmac: remove BUG_ON macro in tasklet

Robin Murphy <robin.murphy@arm.com>
    perf/arm-cci: Remove broken race mitigation

Douglas Anderson <dianders@chromium.org>
    clk: rockchip: undo several noc and special clocks as critical on rk3288

Wen Yang <wen.yang99@zte.com.cn>
    pinctrl: samsung: fix leaked of_node references

Wen Yang <wen.yang99@zte.com.cn>
    pinctrl: pistachio: fix leaked of_node references

Hans de Goede <hdegoede@redhat.com>
    HID: logitech-hidpp: use RAP instead of FAP to get the protocol version

Balakrishna Godavarthi <bgodavar@codeaurora.org>
    Bluetooth: hci_qca: Give enough time to ROME controller to bootup.

Peter Zijlstra <peterz@infradead.org>
    mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions

Jiri Kosina <jkosina@suse.cz>
    x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault()

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    smpboot: Place the __percpu annotation correctly

Kees Cook <keescook@chromium.org>
    x86/build: Move _etext to actual end of .text

Farhan Ali <alifm@linux.ibm.com>
    vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev

Farhan Ali <alifm@linux.ibm.com>
    vfio-ccw: Do not call flush_workqueue while holding the spinlock

Parav Pandit <parav@mellanox.com>
    RDMA/cma: Consider scope_id while binding to ipv6 ll address

Arnd Bergmann <arnd@arndb.de>
    bcache: avoid clang -Wunintialized warning

Coly Li <colyli@suse.de>
    bcache: add failure check to run_cache_set() for journal replay

Tang Junhui <tang.junhui.linux@gmail.com>
    bcache: fix failure in journal relplay

Coly Li <colyli@suse.de>
    bcache: return error immediately in bch_journal_replay()

Shenghui Wang <shhuiw@foxmail.com>
    bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set

Corentin Labbe <clabbe.montjoie@gmail.com>
    crypto: sun4i-ss - Fix invalid calculation of hash end

Sagi Grimberg <sagi@grimberg.me>
    nvme-rdma: fix a NULL deref when an admin connect times out

Sagi Grimberg <sagi@grimberg.me>
    nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE

Kangjie Lu <kjlu@umn.edu>
    net: cw1200: fix a NULL pointer dereference

Aditya Pakki <pakki001@umn.edu>
    rsi: Fix NULL pointer dereference in kmalloc

Dan Carpenter <dan.carpenter@oracle.com>
    mwifiex: prevent an array overflow

Daniel Baluta <daniel.baluta@nxp.com>
    ASoC: fsl_sai: Update is_slave_mode with correct value

Kangjie Lu <kjlu@umn.edu>
    slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register

Daniel T. Lee <danieltimlee@gmail.com>
    libbpf: fix samples/bpf build failure due to undefined UINT32_MAX

Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
    mac80211/cfg80211: update bss channel on channel switch

Sugar Zhang <sugar.zhang@rock-chips.com>
    dmaengine: pl330: _stop: clear interrupt status

Arnd Bergmann <arnd@arndb.de>
    s390: qeth: address type mismatch warning

Mariusz Bialonczyk <manio@skyboo.net>
    w1: fix the resume command API

Nicholas Piggin <npiggin@gmail.com>
    sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs

Philipp Rudo <prudo@linux.ibm.com>
    s390/kexec_file: Fix detection of text segment in ELF loader

Manish Rangankar <mrangankar@marvell.com>
    scsi: qedi: Abort ep termination if offload not scheduled

Fabien Dessenne <fabien.dessenne@st.com>
    rtc: stm32: manage the get_irq probe defer case

Sven Van Asbroeck <thesven73@gmail.com>
    rtc: 88pm860x: prevent use-after-free on device remove

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: don't crash on invalid RX interrupt

Qu Wenruo <wqu@suse.com>
    btrfs: Don't panic when we can't find a root key

Josef Bacik <josef@toxicpanda.com>
    btrfs: fix panic during relocation after ENOSPC before writeback happens

Robbie Ko <robbieko@synology.com>
    Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve

Nadav Amit <namit@vmware.com>
    x86/modules: Avoid breaking W^X while loading modules

Bart Van Assche <bvanassche@acm.org>
    scsi: qla2xxx: Fix hardirq-unsafe locking

Bart Van Assche <bvanassche@acm.org>
    scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()

Bart Van Assche <bvanassche@acm.org>
    scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()

Bart Van Assche <bvanassche@acm.org>
    scsi: qla2xxx: Fix a qla24xx_enable_msix() error path

Viresh Kumar <viresh.kumar@linaro.org>
    sched/cpufreq: Fix kobject memleak

Nicholas Piggin <npiggin@gmail.com>
    powerpc/watchdog: Use hrtimers for per-CPU heartbeat

Qian Cai <cai@lca.pw>
    arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable

Marc Zyngier <marc.zyngier@arm.com>
    ARM: vdso: Remove dependency with the arch_timer driver internals

Fabien Dessenne <fabien.dessenne@st.com>
    media: stm32-dcmi: return appropriate error codes during probe

Jon Derrick <jonathan.derrick@intel.com>
    drm/nouveau/bar/nv50: ensure BAR is mapped

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()

Dan Carpenter <dan.carpenter@oracle.com>
    brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

Flavio Suligoi <f.suligoi@asem.it>
    spi: pxa2xx: fix SCR (divisor) calculation

Arnd Bergmann <arnd@arndb.de>
    ASoC: imx: fix fiq dependencies

Anju T Sudhakar <anju@linux.vnet.ibm.com>
    powerpc/perf: Fix loop exit condition in nest_imc_event_init

Bo YU <tsu.yubo@gmail.com>
    powerpc/boot: Fix missing check of lseek() return value

Anju T Sudhakar <anju@linux.vnet.ibm.com>
    powerpc/perf: Return accordingly on invalid chip-id in

Jerome Brunet <jbrunet@baylibre.com>
    ASoC: hdmi-codec: unlock the device on startup errors

Marek Szyprowski <m.szyprowski@samsung.com>
    usb: dwc3: move synchronize_irq() out of the spinlock protected block

Minas Harutyunyan <minas.harutyunyan@synopsys.com>
    usb: dwc2: gadget: Increase descriptors count for ISOC's

Mac Chiang <mac.chiang@intel.com>
    ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE

Wen Yang <wen.yang99@zte.com.cn>
    pinctrl: zte: fix leaked of_node references

João Paulo Rechi Vita <jprvita@gmail.com>
    Bluetooth: Ignore CC events not matching the last HCI command

Haiyang Zhang <haiyangz@microsoft.com>
    hv_netvsc: fix race that may miss tx queue wakeup

Sameeh Jubran <sameehj@amazon.com>
    net: ena: gcc 8: fix compilation warning

Sameer Pujar <spujar@nvidia.com>
    dmaengine: tegra210-dma: free dma controller in remove()

Masahiro Yamada <yamada.masahiro@socionext.com>
    bpftool: exclude bash-completion/bpftool from .gitignore pattern

Yonghong Song <yhs@fb.com>
    selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c

Vineet Gupta <Vineet.Gupta1@synopsys.com>
    tools/bpf: fix perf build error with uClibc (seen on ARC)

Raul E Rangel <rrangel@chromium.org>
    mmc: core: Verify SD bus width

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix occasional glock use-after-free

Mike Marciniszyn <mike.marciniszyn@intel.com>
    IB/hfi1: Fix WQ_MEM_RECLAIM warning

Roberto Bergantinos Corpas <rbergant@redhat.com>
    NFS: make nfs_match_client killable

YueHaibing <yuehaibing@huawei.com>
    cxgb4: Fix error path in cxgb4_init_module

Ross Lagerwall <ross.lagerwall@citrix.com>
    gfs2: Fix lru_count going negative

David Sterba <dsterba@suse.com>
    Revert "btrfs: Honour FITRIM range constraints during free space trim"

Al Viro <viro@zeniv.linux.org.uk>
    acct_on(): don't mess with freeze protection

YueHaibing <yuehaibing@huawei.com>
    at76c50x-usb: Don't register led_trigger if usb_register_driver failed

Linus Lüssing <linus.luessing@c0d3.blue>
    batman-adv: mcast: fix multicast tt/tvlv worker locking

Eric Dumazet <edumazet@google.com>
    bpf: devmap: fix use-after-free Read in __dev_map_entry_free

YueHaibing <yuehaibing@huawei.com>
    ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit

Alexander Potapenko <glider@google.com>
    media: vivid: use vfree() instead of kfree() for dev->bitmap_cap

Hans Verkuil <hverkuil@xs4all.nl>
    media: vb2: add waiting_in_dqbuf flag

YueHaibing <yuehaibing@huawei.com>
    media: serial_ir: Fix use-after-free in serial_ir_init_module

YueHaibing <yuehaibing@huawei.com>
    media: cpia2: Fix use-after-free in cpia2_exit

Jiufei Xue <jiufei.xue@linux.alibaba.com>
    fbdev: fix WARNING in __alloc_pages_nodemask bug

Amir Goldstein <amir73il@gmail.com>
    ovl: relax WARN_ON() for overlapping layers use case

Josef Bacik <josef@toxicpanda.com>
    btrfs: honor path->skip_locking in backref code

Will Deacon <will.deacon@arm.com>
    arm64: errata: Add workaround for Cortex-A76 erratum #1463225

Arend van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: add subtype check for event handling in data path

Arend van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: assure SSID length from firmware is limited

Daniel Borkmann <daniel@iogearbox.net>
    bpf: add bpf_jit_limit knob to restrict unpriv allocations

Olga Kornievskaia <kolga@netapp.com>
    NFSv4.1 fix incorrect return value in copy_file_range

Olga Kornievskaia <olga.kornievskaia@gmail.com>
    NFSv4.2 fix unnecessary retry in nfs4_copy_file_range

Shile Zhang <shile.zhang@linux.alibaba.com>
    fbdev: fix divide error in fb_var_to_videomode

Dan Carpenter <dan.carpenter@oracle.com>
    udlfb: fix some inconsistent NULL checking

Tobin C. Harding <tobin@kernel.org>
    btrfs: sysfs: don't leak memory when failing add fsid

Tobin C. Harding <tobin@kernel.org>
    btrfs: sysfs: Fix error path kobject memory leak

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix race between ranged fsync and writeback of adjacent ranges

Filipe Manana <fdmanana@suse.com>
    Btrfs: avoid fallback to transaction commit during fsync of files with holes

Filipe Manana <fdmanana@suse.com>
    Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path

Josef Bacik <josef@toxicpanda.com>
    btrfs: don't double unlock on error in btrfs_punch_hole

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix sign extension bug in gfs2_update_stats

Christoph Hellwig <hch@lst.de>
    arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable

Ard Biesheuvel <ard.biesheuvel@arm.com>
    arm64/kernel: kaslr: reduce module randomization range to 2 GB

Dan Williams <dan.j.williams@intel.com>
    libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead

Suthikulpanit, Suravee <Suravee.Suthikulpanit@amd.com>
    kvm: svm/avic: fix off-by-one in checking host APIC ID

Trac Hoang <trac.hoang@broadcom.com>
    mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem

Trac Hoang <trac.hoang@broadcom.com>
    mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem

Daniel Axtens <dja@axtens.net>
    crypto: vmx - CTR: always increment IV as quadword

Martin K. Petersen <martin.petersen@oracle.com>
    Revert "scsi: sd: Keep disk read-only when re-reading partition"

Andrea Parri <andrea.parri@amarulasolutions.com>
    sbitmap: fix improper use of smp_mb__before_atomic()

Andrea Parri <andrea.parri@amarulasolutions.com>
    bio: fix improper use of smp_mb__before_atomic()

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: fix return value for reserved EFER

Damien Le Moal <damien.lemoal@wdc.com>
    f2fs: Fix use of number of devices

Jan Kara <jack@suse.cz>
    ext4: wait for outstanding dio during truncate in nojournal mode

Jan Kara <jack@suse.cz>
    ext4: do not delete unlinked inode from orphan list on failed truncate

Steven Rostedt (VMware) <rostedt@goodmis.org>
    x86: Hide the int3_emulate_call/jmp functions from UML


-------------

Diffstat:

 Documentation/arm64/silicon-errata.txt             |  1 +
 Documentation/sysctl/net.txt                       |  8 +++
 Makefile                                           |  4 +-
 arch/arm/include/asm/cp15.h                        |  2 +
 arch/arm/vdso/vgettimeofday.c                      |  5 +-
 arch/arm64/Kconfig                                 | 18 +++++
 arch/arm64/include/asm/cpucaps.h                   |  3 +-
 arch/arm64/include/asm/cputype.h                   |  2 +
 arch/arm64/include/asm/pgtable.h                   |  3 +-
 arch/arm64/include/asm/vdso_datapage.h             |  1 +
 arch/arm64/kernel/asm-offsets.c                    |  2 +-
 arch/arm64/kernel/cpu_errata.c                     | 24 +++++++
 arch/arm64/kernel/cpu_ops.c                        |  1 +
 arch/arm64/kernel/kaslr.c                          |  6 +-
 arch/arm64/kernel/module.c                         |  2 +-
 arch/arm64/kernel/syscall.c                        | 31 +++++++++
 arch/arm64/kernel/vdso.c                           |  3 +
 arch/arm64/kernel/vdso/gettimeofday.S              |  7 +-
 arch/arm64/mm/dma-mapping.c                        | 10 +++
 arch/arm64/mm/fault.c                              | 37 +++++++++-
 arch/powerpc/boot/addnote.c                        |  6 +-
 arch/powerpc/kernel/head_64.S                      |  4 +-
 arch/powerpc/kernel/watchdog.c                     | 81 +++++++++++-----------
 arch/powerpc/mm/numa.c                             | 18 +++--
 arch/powerpc/perf/imc-pmu.c                        |  7 +-
 arch/powerpc/platforms/powernv/opal-imc.c          |  2 +-
 arch/s390/kernel/kexec_elf.c                       |  7 +-
 arch/s390/mm/pgtable.c                             |  2 +
 arch/sh/include/cpu-sh4/cpu/sh7786.h               |  2 +-
 arch/x86/Makefile                                  |  2 +-
 arch/x86/events/intel/cstate.c                     |  2 +
 arch/x86/events/intel/rapl.c                       |  2 +
 arch/x86/events/msr.c                              |  1 +
 arch/x86/ia32/ia32_signal.c                        | 29 ++++----
 arch/x86/include/asm/text-patching.h               |  4 +-
 arch/x86/kernel/alternative.c                      | 28 ++++++--
 arch/x86/kernel/cpu/mcheck/mce-inject.c            | 14 ++--
 arch/x86/kernel/cpu/mcheck/mce.c                   | 66 ++++++++++++------
 arch/x86/kernel/cpu/microcode/core.c               |  3 +-
 arch/x86/kernel/irq_64.c                           | 19 +++--
 arch/x86/kernel/module.c                           |  2 +-
 arch/x86/kernel/signal.c                           | 29 ++++----
 arch/x86/kernel/vmlinux.lds.S                      |  6 +-
 arch/x86/kvm/svm.c                                 |  6 +-
 arch/x86/kvm/x86.c                                 |  2 +-
 arch/x86/lib/memcpy_64.S                           |  3 +-
 arch/x86/mm/fault.c                                |  2 -
 block/genhd.c                                      | 19 +++++
 block/partition-generic.c                          |  7 ++
 block/sed-opal.c                                   |  9 ++-
 drivers/acpi/arm64/iort.c                          | 19 +++--
 drivers/acpi/property.c                            |  8 +++
 drivers/base/power/main.c                          |  4 ++
 drivers/bluetooth/hci_qca.c                        |  2 +
 drivers/char/hw_random/omap-rng.c                  |  1 +
 drivers/char/random.c                              | 57 ++++++++-------
 drivers/char/virtio_console.c                      |  3 +-
 drivers/clk/rockchip/clk-rk3288.c                  | 21 +++---
 drivers/cpufreq/cpufreq.c                          |  1 +
 drivers/cpufreq/cpufreq_governor.c                 |  2 +
 drivers/cpufreq/kirkwood-cpufreq.c                 | 19 ++---
 drivers/cpufreq/pasemi-cpufreq.c                   |  1 +
 drivers/cpufreq/pmac32-cpufreq.c                   |  2 +
 drivers/cpufreq/ppc_cbe_cpufreq.c                  |  1 +
 drivers/crypto/sunxi-ss/sun4i-ss-hash.c            |  5 +-
 drivers/crypto/vmx/aesp8-ppc.pl                    |  2 +-
 drivers/dma/at_xdmac.c                             |  6 +-
 drivers/dma/pl330.c                                | 10 ++-
 drivers/dma/tegra210-adma.c                        | 28 ++++----
 drivers/extcon/extcon-arizona.c                    | 10 +++
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c          | 24 +++++--
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |  3 +-
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c  |  6 +-
 .../gpu/drm/amd/display/dc/dcn10/dcn10_dpp_dscl.c  | 20 ++++--
 drivers/gpu/drm/drm_drv.c                          |  5 +-
 drivers/gpu/drm/drm_file.c                         |  1 +
 drivers/gpu/drm/etnaviv/etnaviv_drv.c              |  5 ++
 drivers/gpu/drm/etnaviv/etnaviv_drv.h              |  1 +
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              | 10 +--
 drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c     | 12 +++-
 drivers/gpu/drm/omapdrm/dss/dsi.c                  | 60 ++++++++--------
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c   |  3 +
 drivers/gpu/drm/pl111/pl111_versatile.c            |  4 ++
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c             |  8 ++-
 drivers/gpu/drm/tinydrm/ili9225.c                  |  6 +-
 drivers/gpu/drm/tinydrm/mipi-dbi.c                 | 58 +++++++++++-----
 drivers/gpu/drm/v3d/v3d_drv.c                      |  8 ++-
 drivers/gpu/drm/v3d/v3d_drv.h                      |  2 +-
 drivers/gpu/drm/v3d/v3d_irq.c                      | 13 +++-
 drivers/hid/hid-core.c                             | 36 ++++++----
 drivers/hid/hid-logitech-hidpp.c                   | 23 ++++--
 drivers/hwmon/f71805f.c                            | 15 +++-
 drivers/hwmon/pc87427.c                            | 14 +++-
 drivers/hwmon/smsc47b397.c                         | 13 +++-
 drivers/hwmon/smsc47m1.c                           | 28 +++++---
 drivers/hwmon/vt1211.c                             | 15 +++-
 drivers/iio/adc/Kconfig                            |  1 +
 drivers/iio/adc/ad_sigma_delta.c                   | 16 +++--
 drivers/iio/adc/ti-ads7950.c                       | 19 +++--
 drivers/iio/common/ssp_sensors/ssp_iio.c           |  2 +-
 drivers/iio/magnetometer/hmc5843_i2c.c             |  7 +-
 drivers/iio/magnetometer/hmc5843_spi.c             |  7 +-
 drivers/infiniband/core/cma.c                      | 25 +++++--
 drivers/infiniband/hw/cxgb4/cm.c                   |  2 +
 drivers/infiniband/hw/hfi1/init.c                  |  3 +-
 drivers/infiniband/hw/hns/hns_roce_ah.c            |  2 +-
 drivers/md/bcache/alloc.c                          |  5 +-
 drivers/md/bcache/journal.c                        | 26 ++++++-
 drivers/md/bcache/super.c                          | 25 +++++--
 drivers/media/common/videobuf2/videobuf2-core.c    | 22 ++++++
 drivers/media/dvb-frontends/m88ds3103.c            |  9 ++-
 drivers/media/dvb-frontends/si2165.c               |  8 ++-
 drivers/media/i2c/ov2659.c                         |  6 +-
 drivers/media/i2c/ov6650.c                         | 25 ++++---
 drivers/media/pci/saa7146/hexium_gemini.c          |  5 +-
 drivers/media/pci/saa7146/hexium_orion.c           |  5 +-
 drivers/media/platform/coda/coda-bit.c             |  3 +
 drivers/media/platform/stm32/stm32-dcmi.c          | 20 ++++--
 drivers/media/platform/video-mux.c                 |  5 ++
 drivers/media/platform/vimc/vimc-core.c            |  2 +
 drivers/media/platform/vimc/vimc-streamer.c        |  2 +-
 drivers/media/platform/vivid/vivid-vid-cap.c       |  2 +-
 drivers/media/radio/wl128x/fmdrv_common.c          |  7 +-
 drivers/media/rc/serial_ir.c                       |  9 +--
 drivers/media/usb/au0828/au0828-video.c            | 16 +++--
 drivers/media/usb/cpia2/cpia2_v4l.c                |  3 +-
 drivers/media/usb/dvb-usb-v2/dvbsky.c              | 18 ++---
 drivers/media/usb/go7007/go7007-fw.c               |  4 +-
 drivers/media/usb/gspca/gspca.c                    | 12 +++-
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c            |  2 +
 drivers/media/usb/pvrusb2/pvrusb2-hdw.h            |  1 +
 drivers/mmc/core/pwrseq_emmc.c                     | 38 +++++-----
 drivers/mmc/core/sd.c                              |  8 +++
 drivers/mmc/host/mmc_spi.c                         |  4 ++
 drivers/mmc/host/sdhci-iproc.c                     |  6 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  |  8 +++
 drivers/net/ethernet/amazon/ena/ena_netdev.c       |  2 +-
 drivers/net/ethernet/chelsio/cxgb3/l2t.h           |  2 +-
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    | 15 +++-
 drivers/net/ethernet/intel/e1000e/netdev.c         |  2 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  8 +++
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  6 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |  3 +
 drivers/net/hyperv/netvsc.c                        | 15 ++--
 drivers/net/usb/qmi_wwan.c                         | 65 +++++++++--------
 drivers/net/wireless/ath/wil6210/cfg80211.c        |  5 ++
 drivers/net/wireless/ath/wil6210/wmi.c             | 11 +--
 drivers/net/wireless/atmel/at76c50x-usb.c          |  4 +-
 drivers/net/wireless/broadcom/b43/phy_lp.c         |  6 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  6 ++
 .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 15 ++--
 .../wireless/broadcom/brcm80211/brcmfmac/fweh.h    | 16 +++--
 .../broadcom/brcm80211/brcmfmac/fwsignal.c         | 42 ++++++-----
 .../wireless/broadcom/brcm80211/brcmfmac/msgbuf.c  |  2 +-
 .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 27 +++++---
 .../wireless/broadcom/brcm80211/brcmfmac/vendor.c  |  5 +-
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c       |  7 +-
 drivers/net/wireless/marvell/mwifiex/cfg80211.c    |  6 +-
 drivers/net/wireless/marvell/mwifiex/cfp.c         |  3 +
 drivers/net/wireless/realtek/rtlwifi/base.c        |  5 ++
 .../net/wireless/realtek/rtlwifi/rtl8188ee/fw.c    |  2 +
 .../wireless/realtek/rtlwifi/rtl8192c/fw_common.c  |  2 +
 .../net/wireless/realtek/rtlwifi/rtl8192ee/fw.c    |  2 +
 .../net/wireless/realtek/rtlwifi/rtl8723ae/fw.c    |  2 +
 .../net/wireless/realtek/rtlwifi/rtl8723be/fw.c    |  2 +
 .../net/wireless/realtek/rtlwifi/rtl8821ae/fw.c    |  4 ++
 drivers/net/wireless/rsi/rsi_91x_mac80211.c        | 30 ++++----
 drivers/net/wireless/st/cw1200/main.c              |  5 ++
 drivers/nvdimm/pmem.c                              | 10 ++-
 drivers/nvme/host/core.c                           |  7 +-
 drivers/nvme/host/rdma.c                           | 10 +--
 drivers/perf/arm-cci.c                             | 21 +++---
 drivers/phy/allwinner/phy-sun4i-usb.c              |  4 ++
 drivers/phy/motorola/Kconfig                       |  2 +-
 drivers/pinctrl/pinctrl-pistachio.c                |  2 +
 drivers/pinctrl/samsung/pinctrl-exynos-arm.c       |  1 +
 drivers/pinctrl/zte/pinctrl-zx.c                   |  1 +
 drivers/rtc/rtc-88pm860x.c                         |  2 +-
 drivers/rtc/rtc-stm32.c                            |  9 ++-
 drivers/rtc/rtc-xgene.c                            | 18 +++--
 drivers/s390/cio/cio.h                             |  2 +-
 drivers/s390/cio/vfio_ccw_drv.c                    | 32 +++++----
 drivers/s390/cio/vfio_ccw_ops.c                    | 11 ++-
 drivers/s390/crypto/zcrypt_api.c                   |  4 ++
 drivers/s390/net/qeth_core.h                       | 10 ++-
 drivers/s390/net/qeth_core_main.c                  | 14 ++--
 drivers/scsi/libsas/sas_expander.c                 |  5 ++
 drivers/scsi/lpfc/lpfc_ct.c                        | 20 ++++--
 drivers/scsi/lpfc/lpfc_hbadisc.c                   | 11 ++-
 drivers/scsi/lpfc/lpfc_nvme.c                      |  8 +--
 drivers/scsi/qedf/qedf_io.c                        |  1 +
 drivers/scsi/qedi/qedi_iscsi.c                     |  3 +
 drivers/scsi/qla2xxx/qla_isr.c                     |  6 +-
 drivers/scsi/qla2xxx/qla_target.c                  | 25 +++----
 drivers/scsi/qla2xxx/tcm_qla2xxx.c                 |  7 +-
 drivers/scsi/qla4xxx/ql4_os.c                      |  2 +-
 drivers/scsi/sd.c                                  |  3 +-
 drivers/scsi/ufs/ufs-hisi.c                        |  4 ++
 drivers/scsi/ufs/ufshcd.c                          | 28 +++++---
 drivers/slimbus/qcom-ngd-ctrl.c                    |  4 ++
 drivers/spi/spi-imx.c                              |  2 +-
 drivers/spi/spi-pxa2xx.c                           |  8 ++-
 drivers/spi/spi-rspi.c                             |  9 ++-
 drivers/spi/spi-tegra114.c                         | 32 +++++----
 drivers/spi/spi-topcliff-pch.c                     | 15 +++-
 drivers/spi/spi.c                                  |  2 +
 drivers/ssb/bridge_pcmcia_80211.c                  |  9 ++-
 drivers/staging/media/davinci_vpfe/Kconfig         |  2 +-
 .../interface/vchiq_arm/vchiq_2835_arm.c           |  3 +
 .../vc04_services/interface/vchiq_arm/vchiq_core.c |  2 +
 drivers/thunderbolt/icm.c                          |  5 ++
 drivers/thunderbolt/property.c                     | 12 +++-
 drivers/thunderbolt/switch.c                       | 67 +++++++++---------
 drivers/thunderbolt/tb.h                           |  3 +-
 drivers/thunderbolt/xdomain.c                      |  8 ++-
 drivers/tty/ipwireless/main.c                      |  8 +++
 drivers/usb/core/hcd.c                             |  3 +
 drivers/usb/core/hub.c                             |  5 +-
 drivers/usb/dwc2/gadget.c                          | 27 ++++----
 drivers/usb/dwc3/core.c                            |  2 +
 drivers/usb/dwc3/gadget.c                          |  2 -
 drivers/video/fbdev/core/fbcmap.c                  |  2 +
 drivers/video/fbdev/core/modedb.c                  |  3 +
 drivers/video/fbdev/efifb.c                        |  3 +-
 drivers/video/fbdev/udlfb.c                        | 14 ++--
 drivers/w1/w1_io.c                                 |  3 +-
 fs/btrfs/backref.c                                 | 19 +++--
 fs/btrfs/extent-tree.c                             | 28 ++------
 fs/btrfs/file.c                                    | 19 +++--
 fs/btrfs/relocation.c                              | 31 ++++++---
 fs/btrfs/root-tree.c                               | 17 ++---
 fs/btrfs/sysfs.c                                   |  7 +-
 fs/btrfs/tree-log.c                                |  1 +
 fs/char_dev.c                                      |  6 ++
 fs/ext4/inode.c                                    | 23 +++---
 fs/f2fs/data.c                                     | 17 +++--
 fs/f2fs/f2fs.h                                     | 13 +++-
 fs/f2fs/file.c                                     |  2 +-
 fs/f2fs/gc.c                                       |  2 +-
 fs/f2fs/segment.c                                  | 13 ++--
 fs/gfs2/glock.c                                    | 23 +++---
 fs/gfs2/lock_dlm.c                                 |  9 +--
 fs/gfs2/log.c                                      |  3 +-
 fs/gfs2/lops.c                                     |  6 +-
 fs/internal.h                                      |  2 -
 fs/nfs/client.c                                    |  7 +-
 fs/nfs/nfs42proc.c                                 |  3 -
 fs/nfs/nfs4file.c                                  | 12 ++--
 fs/overlayfs/dir.c                                 |  2 +-
 fs/overlayfs/inode.c                               |  3 +-
 include/drm/tinydrm/mipi-dbi.h                     |  5 +-
 include/linux/bio.h                                |  2 +-
 include/linux/cgroup-defs.h                        |  5 ++
 include/linux/filter.h                             |  2 +
 include/linux/genhd.h                              |  1 +
 include/linux/hid.h                                |  1 +
 include/linux/iio/adc/ad_sigma_delta.h             |  1 +
 include/linux/mount.h                              |  2 +
 include/linux/overflow.h                           | 12 +++-
 include/linux/smpboot.h                            |  2 +-
 include/linux/time64.h                             | 21 ++++++
 include/media/videobuf2-core.h                     |  1 +
 include/net/bluetooth/hci.h                        |  1 +
 kernel/acct.c                                      |  4 +-
 kernel/auditfilter.c                               | 12 ++--
 kernel/bpf/core.c                                  | 49 ++++++++++++-
 kernel/bpf/devmap.c                                |  3 +
 kernel/cgroup/cgroup.c                             |  6 ++
 kernel/irq_work.c                                  | 75 +++++++++++---------
 kernel/module.c                                    |  5 ++
 kernel/rcu/rcuperf.c                               |  5 ++
 kernel/rcu/rcutorture.c                            |  5 ++
 kernel/sched/core.c                                |  9 ++-
 kernel/sched/fair.c                                | 16 +++--
 kernel/sched/rt.c                                  |  5 ++
 kernel/time/time.c                                 |  2 +-
 kernel/time/timekeeping.c                          |  6 +-
 kernel/trace/trace_branch.c                        |  4 ++
 lib/kobject_uevent.c                               | 11 +--
 lib/sbitmap.c                                      |  2 +-
 lib/strncpy_from_user.c                            |  5 +-
 lib/strnlen_user.c                                 |  4 +-
 net/batman-adv/distributed-arp-table.c             |  4 +-
 net/batman-adv/main.c                              |  1 +
 net/batman-adv/multicast.c                         | 11 +--
 net/batman-adv/types.h                             |  5 ++
 net/bluetooth/hci_core.c                           |  5 ++
 net/bluetooth/hci_event.c                          | 12 ++++
 net/bluetooth/hci_request.c                        |  5 ++
 net/bluetooth/hci_request.h                        |  1 +
 net/core/sysctl_net_core.c                         | 10 ++-
 net/mac80211/mlme.c                                |  3 -
 net/wireless/nl80211.c                             |  5 ++
 security/selinux/netlabel.c                        | 14 ++--
 sound/soc/codecs/hdmi-codec.c                      |  6 +-
 sound/soc/davinci/davinci-mcasp.c                  |  2 +
 sound/soc/fsl/Kconfig                              |  9 +--
 sound/soc/fsl/eukrea-tlv320.c                      |  4 +-
 sound/soc/fsl/fsl_sai.c                            |  2 +
 sound/soc/fsl/fsl_utils.c                          |  1 +
 sound/soc/intel/boards/kbl_da7219_max98357a.c      |  2 +-
 tools/bpf/bpftool/.gitignore                       |  2 +-
 tools/lib/bpf/bpf.c                                |  2 +
 tools/lib/bpf/bpf.h                                |  1 +
 tools/testing/selftests/bpf/test_libbpf_open.c     |  2 +
 tools/testing/selftests/bpf/trace_helpers.c        |  4 ++
 tools/testing/selftests/cgroup/test_memcontrol.c   | 38 +++++-----
 307 files changed, 2130 insertions(+), 977 deletions(-)

[PATCH 4.19 001/276] x86: Hide the int3_emulate_call/jmp functions from UML

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 693713cbdb3a4bda5a8a678c31f06560bbb14657 upstream.

User Mode Linux does not have access to the ip or sp fields of the pt_regs,
and accessing them causes UML to fail to build. Hide the int3_emulate_jmp()
and int3_emulate_call() instructions from UML, as it doesn't need them
anyway.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/text-patching.h |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/text-patching.h
+++ b/arch/x86/include/asm/text-patching.h
@@ -39,6 +39,7 @@ extern int poke_int3_handler(struct pt_r
 extern void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler);
 extern int after_bootmem;
 
+#ifndef CONFIG_UML_X86
 static inline void int3_emulate_jmp(struct pt_regs *regs, unsigned long ip)
 {
 	regs->ip = ip;
@@ -65,6 +66,7 @@ static inline void int3_emulate_call(str
 	int3_emulate_push(regs, regs->ip - INT3_INSN_SIZE + CALL_INSN_SIZE);
 	int3_emulate_jmp(regs, func);
 }
-#endif
+#endif /* CONFIG_X86_64 */
+#endif /* !CONFIG_UML_X86 */
 
 #endif /* _ASM_X86_TEXT_PATCHING_H */

[PATCH 4.19 002/276] ext4: do not delete unlinked inode from orphan list on failed truncate

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit ee0ed02ca93ef1ecf8963ad96638795d55af2c14 upstream.

It is possible that unlinked inode enters ext4_setattr() (e.g. if
somebody calls ftruncate(2) on unlinked but still open file). In such
case we should not delete the inode from the orphan list if truncate
fails. Note that this is mostly a theoretical concern as filesystem is
corrupted if we reach this path anyway but let's be consistent in our
orphan handling.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5596,7 +5596,7 @@ int ext4_setattr(struct dentry *dentry,
 			up_write(&EXT4_I(inode)->i_data_sem);
 			ext4_journal_stop(handle);
 			if (error) {
-				if (orphan)
+				if (orphan && inode->i_nlink)
 					ext4_orphan_del(NULL, inode);
 				goto err_out;
 			}

[PATCH 4.19 003/276] ext4: wait for outstanding dio during truncate in nojournal mode

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit 82a25b027ca48d7ef197295846b352345853dfa8 upstream.

We didn't wait for outstanding direct IO during truncate in nojournal
mode (as we skip orphan handling in that case). This can lead to fs
corruption or stale data exposure if truncate ends up freeing blocks
and these get reallocated before direct IO finishes. Fix the condition
determining whether the wait is necessary.

CC: stable@vger.kernel.org
Fixes: 1c9114f9c0f1 ("ext4: serialize unlocked dio reads with truncate")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/inode.c |   21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -5601,20 +5601,17 @@ int ext4_setattr(struct dentry *dentry,
 				goto err_out;
 			}
 		}
-		if (!shrink)
+		if (!shrink) {
 			pagecache_isize_extended(inode, oldsize, inode->i_size);
-
-		/*
-		 * Blocks are going to be removed from the inode. Wait
-		 * for dio in flight.  Temporarily disable
-		 * dioread_nolock to prevent livelock.
-		 */
-		if (orphan) {
-			if (!ext4_should_journal_data(inode)) {
-				inode_dio_wait(inode);
-			} else
-				ext4_wait_for_tail_page_commit(inode);
+		} else {
+			/*
+			 * Blocks are going to be removed from the inode. Wait
+			 * for dio in flight.
+			 */
+			inode_dio_wait(inode);
 		}
+		if (orphan && ext4_should_journal_data(inode))
+			ext4_wait_for_tail_page_commit(inode);
 		down_write(&EXT4_I(inode)->i_mmap_sem);
 
 		rc = ext4_break_layouts(inode);

[PATCH 4.19 004/276] f2fs: Fix use of number of devices

[Greg Kroah-Hartman]

From: Damien Le Moal <damien.lemoal@wdc.com>

commit 0916878da355650d7e77104a7ac0fa1784eca852 upstream.

For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.

However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.

Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.

Fixes: 7bb3a371d199 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 08314fb42652..4d02e76b648a 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -197,12 +197,14 @@ struct block_device *f2fs_target_device(struct f2fs_sb_info *sbi,
 	struct block_device *bdev = sbi->sb->s_bdev;
 	int i;
 
-	for (i = 0; i < sbi->s_ndevs; i++) {
-		if (FDEV(i).start_blk <= blk_addr &&
-					FDEV(i).end_blk >= blk_addr) {
-			blk_addr -= FDEV(i).start_blk;
-			bdev = FDEV(i).bdev;
-			break;
+	if (f2fs_is_multi_device(sbi)) {
+		for (i = 0; i < sbi->s_ndevs; i++) {
+			if (FDEV(i).start_blk <= blk_addr &&
+			    FDEV(i).end_blk >= blk_addr) {
+				blk_addr -= FDEV(i).start_blk;
+				bdev = FDEV(i).bdev;
+				break;
+			}
 		}
 	}
 	if (bio) {
@@ -216,6 +218,9 @@ int f2fs_target_device_index(struct f2fs_sb_info *sbi, block_t blkaddr)
 {
 	int i;
 
+	if (!f2fs_is_multi_device(sbi))
+		return 0;
+
 	for (i = 0; i < sbi->s_ndevs; i++)
 		if (FDEV(i).start_blk <= blkaddr && FDEV(i).end_blk >= blkaddr)
 			return i;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index 1f5d5f62bb77..a4b6eacf22ea 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -1336,6 +1336,17 @@ static inline bool time_to_inject(struct f2fs_sb_info *sbi, int type)
 }
 #endif
 
+/*
+ * Test if the mounted volume is a multi-device volume.
+ *   - For a single regular disk volume, sbi->s_ndevs is 0.
+ *   - For a single zoned disk volume, sbi->s_ndevs is 1.
+ *   - For a multi-device volume, sbi->s_ndevs is always 2 or more.
+ */
+static inline bool f2fs_is_multi_device(struct f2fs_sb_info *sbi)
+{
+	return sbi->s_ndevs > 1;
+}
+
 /* For write statistics. Suppose sector size is 512 bytes,
  * and the return value is in kbytes. s is of struct f2fs_sb_info.
  */
@@ -3455,7 +3466,7 @@ static inline bool f2fs_force_buffered_io(struct inode *inode, int rw)
 {
 	return (f2fs_post_read_required(inode) ||
 			(rw == WRITE && test_opt(F2FS_I_SB(inode), LFS)) ||
-			F2FS_I_SB(inode)->s_ndevs);
+			f2fs_is_multi_device(F2FS_I_SB(inode)));
 }
 
 #ifdef CONFIG_F2FS_FAULT_INJECTION
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index b3f46e3bec17..8d1eb8dec605 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2539,7 +2539,7 @@ static int f2fs_ioc_flush_device(struct file *filp, unsigned long arg)
 							sizeof(range)))
 		return -EFAULT;
 
-	if (sbi->s_ndevs <= 1 || sbi->s_ndevs - 1 <= range.dev_num ||
+	if (!f2fs_is_multi_device(sbi) || sbi->s_ndevs - 1 <= range.dev_num ||
 			sbi->segs_per_sec != 1) {
 		f2fs_msg(sbi->sb, KERN_WARNING,
 			"Can't flush %u in %d for segs_per_sec %u != 1\n",
diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c
index 5c8d00422237..d44b57a363ff 100644
--- a/fs/f2fs/gc.c
+++ b/fs/f2fs/gc.c
@@ -1256,7 +1256,7 @@ void f2fs_build_gc_manager(struct f2fs_sb_info *sbi)
 	sbi->gc_pin_file_threshold = DEF_GC_FAILED_PINNED_FILES;
 
 	/* give warm/cold data area from slower device */
-	if (sbi->s_ndevs && sbi->segs_per_sec == 1)
+	if (f2fs_is_multi_device(sbi) && sbi->segs_per_sec == 1)
 		SIT_I(sbi)->last_victim[ALLOC_NEXT] =
 				GET_SEGNO(sbi, FDEV(0).end_blk) + 1;
 }
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index ac038563273d..03fa2c4d3d79 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -574,7 +574,7 @@ static int submit_flush_wait(struct f2fs_sb_info *sbi, nid_t ino)
 	int ret = 0;
 	int i;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return __submit_flush_wait(sbi, sbi->sb->s_bdev);
 
 	for (i = 0; i < sbi->s_ndevs; i++) {
@@ -640,7 +640,8 @@ int f2fs_issue_flush(struct f2fs_sb_info *sbi, nid_t ino)
 		return ret;
 	}
 
-	if (atomic_inc_return(&fcc->issing_flush) == 1 || sbi->s_ndevs > 1) {
+	if (atomic_inc_return(&fcc->issing_flush) == 1 ||
+	    f2fs_is_multi_device(sbi)) {
 		ret = submit_flush_wait(sbi, ino);
 		atomic_dec(&fcc->issing_flush);
 
@@ -746,7 +747,7 @@ int f2fs_flush_device_cache(struct f2fs_sb_info *sbi)
 {
 	int ret = 0, i;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return 0;
 
 	for (i = 1; i < sbi->s_ndevs; i++) {
@@ -1289,7 +1290,7 @@ static int __queue_discard_cmd(struct f2fs_sb_info *sbi,
 
 	trace_f2fs_queue_discard(bdev, blkstart, blklen);
 
-	if (sbi->s_ndevs) {
+	if (f2fs_is_multi_device(sbi)) {
 		int devi = f2fs_target_device_index(sbi, blkstart);
 
 		blkstart -= FDEV(devi).start_blk;
@@ -1638,7 +1639,7 @@ static int __f2fs_issue_discard_zone(struct f2fs_sb_info *sbi,
 	block_t lblkstart = blkstart;
 	int devi = 0;
 
-	if (sbi->s_ndevs) {
+	if (f2fs_is_multi_device(sbi)) {
 		devi = f2fs_target_device_index(sbi, blkstart);
 		blkstart -= FDEV(devi).start_blk;
 	}
@@ -2971,7 +2972,7 @@ static void update_device_state(struct f2fs_io_info *fio)
 	struct f2fs_sb_info *sbi = fio->sbi;
 	unsigned int devidx;
 
-	if (!sbi->s_ndevs)
+	if (!f2fs_is_multi_device(sbi))
 		return;
 
 	devidx = f2fs_target_device_index(sbi, fio->new_blkaddr);
-- 
2.21.0

[PATCH 4.19 005/276] KVM: x86: fix return value for reserved EFER

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 66f61c92889ff3ca365161fb29dd36d6354682ba upstream.

Commit 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for
host-initiated writes", 2019-04-02) introduced a "return false" in a
function returning int, and anyway set_efer has a "nonzero on error"
conventon so it should be returning 1.

Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 11988499e62b ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes")
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1188,7 +1188,7 @@ static int set_efer(struct kvm_vcpu *vcp
 	u64 efer = msr_info->data;
 
 	if (efer & efer_reserved_bits)
-		return false;
+		return 1;
 
 	if (!msr_info->host_initiated) {
 		if (!__kvm_valid_efer(vcpu, efer))

[PATCH 4.19 006/276] bio: fix improper use of smp_mb__before_atomic()

[Greg Kroah-Hartman]

From: Andrea Parri <andrea.parri@amarulasolutions.com>

commit f381c6a4bd0ae0fde2d6340f1b9bb0f58d915de6 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: dac56212e8127 ("bio: skip atomic inc/dec of ->bi_cnt for most use cases")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/bio.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -257,7 +257,7 @@ static inline void bio_cnt_set(struct bi
 {
 	if (count != 1) {
 		bio->bi_flags |= (1 << BIO_REFFED);
-		smp_mb__before_atomic();
+		smp_mb();
 	}
 	atomic_set(&bio->__bi_cnt, count);
 }

[PATCH 4.19 007/276] sbitmap: fix improper use of smp_mb__before_atomic()

[Greg Kroah-Hartman]

From: Andrea Parri <andrea.parri@amarulasolutions.com>

commit a0934fd2b1208458e55fc4b48f55889809fce666 upstream.

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic_set() primitive.

Replace the barrier with an smp_mb().

Fixes: 6c0ca7ae292ad ("sbitmap: fix wakeup hang after sbq resize")
Cc: stable@vger.kernel.org
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: linux-block@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/sbitmap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/lib/sbitmap.c
+++ b/lib/sbitmap.c
@@ -356,7 +356,7 @@ static void sbitmap_queue_update_wake_ba
 		 * to ensure that the batch size is updated before the wait
 		 * counts.
 		 */
-		smp_mb__before_atomic();
+		smp_mb();
 		for (i = 0; i < SBQ_WAIT_QUEUES; i++)
 			atomic_set(&sbq->ws[i].wait_cnt, 1);
 	}

[PATCH 4.19 008/276] Revert "scsi: sd: Keep disk read-only when re-reading partition"

[Greg Kroah-Hartman]

From: Martin K. Petersen <martin.petersen@oracle.com>

commit 8acf608e602f6ec38b7cc37b04c80f1ce9a1a6cc upstream.

This reverts commit 20bd1d026aacc5399464f8328f305985c493cde3.

This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.

Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.

Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.

Fixes: 20bd1d026aac ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sd.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2605,7 +2605,6 @@ sd_read_write_protect_flag(struct scsi_d
 	int res;
 	struct scsi_device *sdp = sdkp->device;
 	struct scsi_mode_data data;
-	int disk_ro = get_disk_ro(sdkp->disk);
 	int old_wp = sdkp->write_prot;
 
 	set_disk_ro(sdkp->disk, 0);
@@ -2646,7 +2645,7 @@ sd_read_write_protect_flag(struct scsi_d
 			  "Test WP failed, assume Write Enabled\n");
 	} else {
 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
-		set_disk_ro(sdkp->disk, sdkp->write_prot || disk_ro);
+		set_disk_ro(sdkp->disk, sdkp->write_prot);
 		if (sdkp->first_scan || old_wp != sdkp->write_prot) {
 			sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
 				  sdkp->write_prot ? "on" : "off");

[PATCH 4.19 009/276] crypto: vmx - CTR: always increment IV as quadword

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

commit 009b30ac7444c17fae34c4f435ebce8e8e2b3250 upstream.

The kernel self-tests picked up an issue with CTR mode:
alg: skcipher: p8_aes_ctr encryption test failed (wrong result) on test vector 3, cfg="uneven misaligned splits, may sleep"

Test vector 3 has an IV of FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD, so
after 3 increments it should wrap around to 0.

In the aesp8-ppc code from OpenSSL, there are two paths that
increment IVs: the bulk (8 at a time) path, and the individual
path which is used when there are fewer than 8 AES blocks to
process.

In the bulk path, the IV is incremented with vadduqm: "Vector
Add Unsigned Quadword Modulo", which does 128-bit addition.

In the individual path, however, the IV is incremented with
vadduwm: "Vector Add Unsigned Word Modulo", which instead
does 4 32-bit additions. Thus the IV would instead become
FFFFFFFFFFFFFFFFFFFFFFFF00000000, throwing off the result.

Use vadduqm.

This was probably a typo originally, what with q and w being
adjacent. It is a pretty narrow edge case: I am really
impressed by the quality of the kernel self-tests!

Fixes: 5c380d623ed3 ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/vmx/aesp8-ppc.pl |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/vmx/aesp8-ppc.pl
+++ b/drivers/crypto/vmx/aesp8-ppc.pl
@@ -1357,7 +1357,7 @@ Loop_ctr32_enc:
 	addi		$idx,$idx,16
 	bdnz		Loop_ctr32_enc
 
-	vadduwm		$ivec,$ivec,$one
+	vadduqm		$ivec,$ivec,$one
 	 vmr		$dat,$inptail
 	 lvx		$inptail,0,$inp
 	 addi		$inp,$inp,16

[PATCH 4.19 010/276] mmc: sdhci-iproc: cygnus: Set NO_HISPD bit to fix HS50 data hold time problem

[Greg Kroah-Hartman]

From: Trac Hoang <trac.hoang@broadcom.com>

commit b7dfa695afc40d5396ed84b9f25aa3754de23e39 upstream.

The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.

This change applies only to the Cygnus platform.

Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-iproc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -185,7 +185,8 @@ static const struct sdhci_ops sdhci_ipro
 };
 
 static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
-	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
 	.ops = &sdhci_iproc_32only_ops,
 };

[PATCH 4.19 011/276] mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem

[Greg Kroah-Hartman]

From: Trac Hoang <trac.hoang@broadcom.com>

commit ec0970e0a1b2c807c908d459641a9f9a1be3e130 upstream.

The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode.  This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.

Stable tag (v4.12+) chosen to assist stable kernel maintainers so that
the change does not produce merge conflicts backporting to older kernel
versions. In reality, the timing bug existed since the driver was first
introduced but there is no need for this driver to be supported in kernel
versions that old.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-iproc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -209,7 +209,8 @@ static const struct sdhci_iproc_data ipr
 
 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
 	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
+		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
 	.ops = &sdhci_iproc_ops,
 };

[PATCH 4.19 012/276] kvm: svm/avic: fix off-by-one in checking host APIC ID

[Greg Kroah-Hartman]

From: Suthikulpanit, Suravee <Suravee.Suthikulpanit@amd.com>

commit c9bcd3e3335d0a29d89fabd2c385e1b989e6f1b0 upstream.

Current logic does not allow VCPU to be loaded onto CPU with
APIC ID 255. This should be allowed since the host physical APIC ID
field in the AVIC Physical APIC table entry is an 8-bit value,
and APIC ID 255 is valid in system with x2APIC enabled.
Instead, do not allow VCPU load if the host APIC ID cannot be
represented by an 8-bit value.

Also, use the more appropriate AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK
instead of AVIC_MAX_PHYSICAL_ID_COUNT.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/svm.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2022,7 +2022,11 @@ static void avic_vcpu_load(struct kvm_vc
 	if (!kvm_vcpu_apicv_active(vcpu))
 		return;
 
-	if (WARN_ON(h_physical_id >= AVIC_MAX_PHYSICAL_ID_COUNT))
+	/*
+	 * Since the host physical APIC id is 8 bits,
+	 * we can support host APIC ID upto 255.
+	 */
+	if (WARN_ON(h_physical_id > AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK))
 		return;
 
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));

[PATCH 4.19 013/276] libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead

[Greg Kroah-Hartman]

From: Dan Williams <dan.j.williams@intel.com>

commit 52f476a323f9efc959be1c890d0cdcf12e1582e0 upstream.

Jeff discovered that performance improves from ~375K iops to ~519K iops
on a simple psync-write fio workload when moving the location of 'struct
page' from the default PMEM location to DRAM. This result is surprising
because the expectation is that 'struct page' for dax is only needed for
third party references to dax mappings. For example, a dax-mapped buffer
passed to another system call for direct-I/O requires 'struct page' for
sending the request down the driver stack and pinning the page. There is
no usage of 'struct page' for first party access to a file via
read(2)/write(2) and friends.

However, this "no page needed" expectation is violated by
CONFIG_HARDENED_USERCOPY and the check_copy_size() performed in
copy_from_iter_full_nocache() and copy_to_iter_mcsafe(). The
check_heap_object() helper routine assumes the buffer is backed by a
slab allocator (DRAM) page and applies some checks.  Those checks are
invalid, dax pages do not originate from the slab, and redundant,
dax_iomap_actor() has already validated that the I/O is within bounds.
Specifically that routine validates that the logical file offset is
within bounds of the file, then it does a sector-to-pfn translation
which validates that the physical mapping is within bounds of the block
device.

Bypass additional hardened usercopy overhead and call the 'no check'
versions of the copy_{to,from}_iter operations directly.

Fixes: 0aed55af8834 ("x86, uaccess: introduce copy_from_iter_flushcache...")
Cc: <stable@vger.kernel.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-and-tested-by: Jeff Smits <jeff.smits@intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/pmem.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -281,16 +281,22 @@ static long pmem_dax_direct_access(struc
 	return __pmem_direct_access(pmem, pgoff, nr_pages, kaddr, pfn);
 }
 
+/*
+ * Use the 'no check' versions of copy_from_iter_flushcache() and
+ * copy_to_iter_mcsafe() to bypass HARDENED_USERCOPY overhead. Bounds
+ * checking, both file offset and device offset, is handled by
+ * dax_iomap_actor()
+ */
 static size_t pmem_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff,
 		void *addr, size_t bytes, struct iov_iter *i)
 {
-	return copy_from_iter_flushcache(addr, bytes, i);
+	return _copy_from_iter_flushcache(addr, bytes, i);
 }
 
 static size_t pmem_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff,
 		void *addr, size_t bytes, struct iov_iter *i)
 {
-	return copy_to_iter_mcsafe(addr, bytes, i);
+	return _copy_to_iter_mcsafe(addr, bytes, i);
 }
 
 static const struct dax_operations pmem_dax_ops = {

[PATCH 4.19 014/276] arm64/kernel: kaslr: reduce module randomization range to 2 GB

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ard.biesheuvel@arm.com>

commit b2eed9b58811283d00fa861944cb75797d4e52a7 upstream.

The following commit

  7290d5809571 ("module: use relative references for __ksymtab entries")

updated the ksymtab handling of some KASLR capable architectures
so that ksymtab entries are emitted as pairs of 32-bit relative
references. This reduces the size of the entries, but more
importantly, it gets rid of statically assigned absolute
addresses, which require fixing up at boot time if the kernel
is self relocating (which takes a 24 byte RELA entry for each
member of the ksymtab struct).

Since ksymtab entries are always part of the same module as the
symbol they export, it was assumed at the time that a 32-bit
relative reference is always sufficient to capture the offset
between a ksymtab entry and its target symbol.

Unfortunately, this is not always true: in the case of per-CPU
variables, a per-CPU variable's base address (which usually differs
from the actual address of any of its per-CPU copies) is allocated
in the vicinity of the ..data.percpu section in the core kernel
(i.e., in the per-CPU reserved region which follows the section
containing the core kernel's statically allocated per-CPU variables).

Since we randomize the module space over a 4 GB window covering
the core kernel (based on the -/+ 4 GB range of an ADRP/ADD pair),
we may end up putting the core kernel out of the -/+ 2 GB range of
32-bit relative references of module ksymtab entries that refer to
per-CPU variables.

So reduce the module randomization range a bit further. We lose
1 bit of randomization this way, but this is something we can
tolerate.

Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/kaslr.c  |    6 +++---
 arch/arm64/kernel/module.c |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -145,15 +145,15 @@ u64 __init kaslr_early_init(u64 dt_phys)
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
 		/*
-		 * Randomize the module region over a 4 GB window covering the
+		 * Randomize the module region over a 2 GB window covering the
 		 * kernel. This reduces the risk of modules leaking information
 		 * about the address of the kernel itself, but results in
 		 * branches between modules and the core kernel that are
 		 * resolved via PLTs. (Branches between modules will be
 		 * resolved normally.)
 		 */
-		module_range = SZ_4G - (u64)(_end - _stext);
-		module_alloc_base = max((u64)_end + offset - SZ_4G,
+		module_range = SZ_2G - (u64)(_end - _stext);
+		module_alloc_base = max((u64)_end + offset - SZ_2G,
 					(u64)MODULES_VADDR);
 	} else {
 		/*
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -56,7 +56,7 @@ void *module_alloc(unsigned long size)
 		 * can simply omit this fallback in that case.
 		 */
 		p = __vmalloc_node_range(size, MODULE_ALIGN, module_alloc_base,
-				module_alloc_base + SZ_4G, GFP_KERNEL,
+				module_alloc_base + SZ_2G, GFP_KERNEL,
 				PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
 				__builtin_return_address(0));
 

[PATCH 4.19 015/276] arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

commit a98d9ae937d256ed679a935fc82d9deaa710d98e upstream.

DMA allocations that can't sleep may return non-remapped addresses, but
we do not properly handle them in the mmap and get_sgtable methods.
Resolve non-vmalloc addresses using virt_to_page to handle this corner
case.

Cc: <stable@vger.kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/dma-mapping.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -664,6 +664,11 @@ static int __iommu_mmap_attrs(struct dev
 	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
+	if (!is_vmalloc_addr(cpu_addr)) {
+		unsigned long pfn = page_to_pfn(virt_to_page(cpu_addr));
+		return __swiotlb_mmap_pfn(vma, pfn, size);
+	}
+
 	if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {
 		/*
 		 * DMA_ATTR_FORCE_CONTIGUOUS allocations are always remapped,
@@ -687,6 +692,11 @@ static int __iommu_get_sgtable(struct de
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	struct vm_struct *area = find_vm_area(cpu_addr);
 
+	if (!is_vmalloc_addr(cpu_addr)) {
+		struct page *page = virt_to_page(cpu_addr);
+		return __swiotlb_get_sgtable_page(sgt, page, size);
+	}
+
 	if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {
 		/*
 		 * DMA_ATTR_FORCE_CONTIGUOUS allocations are always remapped,

[PATCH 4.19 016/276] gfs2: Fix sign extension bug in gfs2_update_stats

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

commit 5a5ec83d6ac974b12085cd99b196795f14079037 upstream.

Commit 4d207133e9c3 changed the types of the statistic values in struct
gfs2_lkstats from s64 to u64.  Because of that, what should be a signed
value in gfs2_update_stats turned into an unsigned value.  When shifted
right, we end up with a large positive value instead of a small negative
value, which results in an incorrect variance estimate.

Fixes: 4d207133e9c3 ("gfs2: Make statistics unsigned, suitable for use with do_div()")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/gfs2/lock_dlm.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -31,9 +31,10 @@
  * @delta is the difference between the current rtt sample and the
  * running average srtt. We add 1/8 of that to the srtt in order to
  * update the current srtt estimate. The variance estimate is a bit
- * more complicated. We subtract the abs value of the @delta from
- * the current variance estimate and add 1/4 of that to the running
- * total.
+ * more complicated. We subtract the current variance estimate from
+ * the abs value of the @delta and add 1/4 of that to the running
+ * total.  That's equivalent to 3/4 of the current variance
+ * estimate plus 1/4 of the abs of @delta.
  *
  * Note that the index points at the array entry containing the smoothed
  * mean value, and the variance is always in the following entry
@@ -49,7 +50,7 @@ static inline void gfs2_update_stats(str
 	s64 delta = sample - s->stats[index];
 	s->stats[index] += (delta >> 3);
 	index++;
-	s->stats[index] += ((abs(delta) - s->stats[index]) >> 2);
+	s->stats[index] += (s64)(abs(delta) - s->stats[index]) >> 2;
 }
 
 /**

[PATCH 4.19 017/276] btrfs: dont double unlock on error in btrfs_punch_hole

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 8fca955057b9c58467d1b231e43f19c4cf26ae8c upstream.

If we have an error writing out a delalloc range in
btrfs_punch_hole_lock_range we'll unlock the inode and then goto
out_only_mutex, where we will again unlock the inode.  This is bad,
don't do this.

Fixes: f27451f22996 ("Btrfs: add support for fallocate's zero range operation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/file.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2565,10 +2565,8 @@ static int btrfs_punch_hole(struct inode
 
 	ret = btrfs_punch_hole_lock_range(inode, lockstart, lockend,
 					  &cached_state);
-	if (ret) {
-		inode_unlock(inode);
+	if (ret)
 		goto out_only_mutex;
-	}
 
 	path = btrfs_alloc_path();
 	if (!path) {

[PATCH 4.19 018/276] Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 72bd2323ec87722c115a5906bc6a1b31d11e8f54 upstream.

Currently when we fail to COW a path at btrfs_update_root() we end up
always aborting the transaction. However all the current callers of
btrfs_update_root() are able to deal with errors returned from it, many do
end up aborting the transaction themselves (directly or not, such as the
transaction commit path), other BUG_ON() or just gracefully cancel whatever
they were doing.

When syncing the fsync log, we call btrfs_update_root() through
tree-log.c:update_log_root(), and if it returns an -ENOSPC error, the log
sync code does not abort the transaction, instead it gracefully handles
the error and returns -EAGAIN to the fsync handler, so that it falls back
to a transaction commit. Any other error different from -ENOSPC, makes the
log sync code abort the transaction.

So remove the transaction abort from btrfs_update_log() when we fail to
COW a path to update the root item, so that if an -ENOSPC failure happens
we avoid aborting the current transaction and have a chance of the fsync
succeeding after falling back to a transaction commit.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203413
Fixes: 79787eaab46121 ("btrfs: replace many BUG_ONs with proper error handling")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/root-tree.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -132,10 +132,8 @@ int btrfs_update_root(struct btrfs_trans
 		return -ENOMEM;
 
 	ret = btrfs_search_slot(trans, root, key, path, 0, 1);
-	if (ret < 0) {
-		btrfs_abort_transaction(trans, ret);
+	if (ret < 0)
 		goto out;
-	}
 
 	if (ret != 0) {
 		btrfs_print_leaf(path->nodes[0]);

[PATCH 4.19 019/276] Btrfs: avoid fallback to transaction commit during fsync of files with holes

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit ebb929060aeb162417b4c1307e63daee47b208d9 upstream.

When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).

For example, we have the two following leafs:

Leaf N:

  -----------------------------------------------
  | ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
  -----------------------------------------------
  The file extent item at the end of leaf N has a length of 4Kb,
  representing the file range from 64K to 68K - 1.

Leaf N + 1:

  -----------------------------------------------
  | (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
  -----------------------------------------------
  The file extent item at the first slot of leaf N + 1 has a length of
  4Kb too, representing the file range from 72K to 76K - 1.

During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.

Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.

The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.

Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.

Fixes: 4ee3fad34a9c ("Btrfs: fix fsync after hole punching when using no-holes feature")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/tree-log.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4121,6 +4121,7 @@ fill_holes:
 							       *last_extent, 0,
 							       0, len, 0, len,
 							       0, 0, 0);
+				*last_extent += len;
 			}
 		}
 	}

[PATCH 4.19 020/276] Btrfs: fix race between ranged fsync and writeback of adjacent ranges

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 0c713cbab6200b0ab6473b50435e450a6e1de85d upstream.

When we do a full fsync (the bit BTRFS_INODE_NEEDS_FULL_SYNC is set in the
inode) that happens to be ranged, which happens during a msync() or writes
for files opened with O_SYNC for example, we can end up with a corrupt log,
due to different file extent items representing ranges that overlap with
each other, or hit some assertion failures.

When doing a ranged fsync we only flush delalloc and wait for ordered
exents within that range. If while we are logging items from our inode
ordered extents for adjacent ranges complete, we end up in a race that can
make us insert the file extent items that overlap with others we logged
previously and the assertion failures.

For example, if tree-log.c:copy_items() receives a leaf that has the
following file extents items, all with a length of 4K and therefore there
is an implicit hole in the range 68K to 72K - 1:

  (257 EXTENT_ITEM 64K), (257 EXTENT_ITEM 72K), (257 EXTENT_ITEM 76K), ...

It copies them to the log tree. However due to the need to detect implicit
holes, it may release the path, in order to look at the previous leaf to
detect an implicit hole, and then later it will search again in the tree
for the first file extent item key, with the goal of locking again the
leaf (which might have changed due to concurrent changes to other inodes).

However when it locks again the leaf containing the first key, the key
corresponding to the extent at offset 72K may not be there anymore since
there is an ordered extent for that range that is finishing (that is,
somewhere in the middle of btrfs_finish_ordered_io()), and it just
removed the file extent item but has not yet replaced it with a new file
extent item, so the part of copy_items() that does hole detection will
decide that there is a hole in the range starting from 68K to 76K - 1,
and therefore insert a file extent item to represent that hole, having
a key offset of 68K. After that we now have a log tree with 2 different
extent items that have overlapping ranges:

 1) The file extent item copied before copy_items() released the path,
    which has a key offset of 72K and a length of 4K, representing the
    file range 72K to 76K - 1.

 2) And a file extent item representing a hole that has a key offset of
    68K and a length of 8K, representing the range 68K to 76K - 1. This
    item was inserted after releasing the path, and overlaps with the
    extent item inserted before.

The overlapping extent items can cause all sorts of unpredictable and
incorrect behaviour, either when replayed or if a fast (non full) fsync
happens later, which can trigger a BUG_ON() when calling
btrfs_set_item_key_safe() through __btrfs_drop_extents(), producing a
trace like the following:

  [61666.783269] ------------[ cut here ]------------
  [61666.783943] kernel BUG at fs/btrfs/ctree.c:3182!
  [61666.784644] invalid opcode: 0000 [#1] PREEMPT SMP
  (...)
  [61666.786253] task: ffff880117b88c40 task.stack: ffffc90008168000
  [61666.786253] RIP: 0010:btrfs_set_item_key_safe+0x7c/0xd2 [btrfs]
  [61666.786253] RSP: 0018:ffffc9000816b958 EFLAGS: 00010246
  [61666.786253] RAX: 0000000000000000 RBX: 000000000000000f RCX: 0000000000030000
  [61666.786253] RDX: 0000000000000000 RSI: ffffc9000816ba4f RDI: ffffc9000816b937
  [61666.786253] RBP: ffffc9000816b998 R08: ffff88011dae2428 R09: 0000000000001000
  [61666.786253] R10: 0000160000000000 R11: 6db6db6db6db6db7 R12: ffff88011dae2418
  [61666.786253] R13: ffffc9000816ba4f R14: ffff8801e10c4118 R15: ffff8801e715c000
  [61666.786253] FS:  00007f6060a18700(0000) GS:ffff88023f5c0000(0000) knlGS:0000000000000000
  [61666.786253] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [61666.786253] CR2: 00007f6060a28000 CR3: 0000000213e69000 CR4: 00000000000006e0
  [61666.786253] Call Trace:
  [61666.786253]  __btrfs_drop_extents+0x5e3/0xaad [btrfs]
  [61666.786253]  ? time_hardirqs_on+0x9/0x14
  [61666.786253]  btrfs_log_changed_extents+0x294/0x4e0 [btrfs]
  [61666.786253]  ? release_extent_buffer+0x38/0xb4 [btrfs]
  [61666.786253]  btrfs_log_inode+0xb6e/0xcdc [btrfs]
  [61666.786253]  ? lock_acquire+0x131/0x1c5
  [61666.786253]  ? btrfs_log_inode_parent+0xee/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? btrfs_log_inode_parent+0x1f5/0x659 [btrfs]
  [61666.786253]  btrfs_log_inode_parent+0x223/0x659 [btrfs]
  [61666.786253]  ? arch_local_irq_save+0x9/0xc
  [61666.786253]  ? lockref_get_not_zero+0x2c/0x34
  [61666.786253]  ? rcu_read_unlock+0x3e/0x5d
  [61666.786253]  btrfs_log_dentry_safe+0x60/0x7b [btrfs]
  [61666.786253]  btrfs_sync_file+0x317/0x42c [btrfs]
  [61666.786253]  vfs_fsync_range+0x8c/0x9e
  [61666.786253]  SyS_msync+0x13c/0x1c9
  [61666.786253]  entry_SYSCALL_64_fastpath+0x18/0xad

A sample of a corrupt log tree leaf with overlapping extents I got from
running btrfs/072:

      item 14 key (295 108 200704) itemoff 2599 itemsize 53
              extent data disk bytenr 0 nr 0
              extent data offset 0 nr 458752 ram 458752
      item 15 key (295 108 659456) itemoff 2546 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 606208 nr 163840 ram 770048
      item 16 key (295 108 663552) itemoff 2493 itemsize 53
              extent data disk bytenr 4343541760 nr 770048
              extent data offset 610304 nr 155648 ram 770048
      item 17 key (295 108 819200) itemoff 2440 itemsize 53
              extent data disk bytenr 4334788608 nr 4096
              extent data offset 0 nr 4096 ram 4096

The file extent item at offset 659456 (item 15) ends at offset 823296
(659456 + 163840) while the next file extent item (item 16) starts at
offset 663552.

Another different problem that the race can trigger is a failure in the
assertions at tree-log.c:copy_items(), which expect that the first file
extent item key we found before releasing the path exists after we have
released path and that the last key we found before releasing the path
also exists after releasing the path:

  $ cat -n fs/btrfs/tree-log.c
  4080          if (need_find_last_extent) {
  4081                  /* btrfs_prev_leaf could return 1 without releasing the path */
  4082                  btrfs_release_path(src_path);
  4083                  ret = btrfs_search_slot(NULL, inode->root, &first_key,
  4084                                  src_path, 0, 0);
  4085                  if (ret < 0)
  4086                          return ret;
  4087                  ASSERT(ret == 0);
  (...)
  4103                  if (i >= btrfs_header_nritems(src_path->nodes[0])) {
  4104                          ret = btrfs_next_leaf(inode->root, src_path);
  4105                          if (ret < 0)
  4106                                  return ret;
  4107                          ASSERT(ret == 0);
  4108                          src = src_path->nodes[0];
  4109                          i = 0;
  4110                          need_find_last_extent = true;
  4111                  }
  (...)

The second assertion implicitly expects that the last key before the path
release still exists, because the surrounding while loop only stops after
we have found that key. When this assertion fails it produces a stack like
this:

  [139590.037075] assertion failed: ret == 0, file: fs/btrfs/tree-log.c, line: 4107
  [139590.037406] ------------[ cut here ]------------
  [139590.037707] kernel BUG at fs/btrfs/ctree.h:3546!
  [139590.038034] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [139590.038340] CPU: 1 PID: 31841 Comm: fsstress Tainted: G        W         5.0.0-btrfs-next-46 #1
  (...)
  [139590.039354] RIP: 0010:assfail.constprop.24+0x18/0x1a [btrfs]
  (...)
  [139590.040397] RSP: 0018:ffffa27f48f2b9b0 EFLAGS: 00010282
  [139590.040730] RAX: 0000000000000041 RBX: ffff897c635d92c8 RCX: 0000000000000000
  [139590.041105] RDX: 0000000000000000 RSI: ffff897d36a96868 RDI: ffff897d36a96868
  [139590.041470] RBP: ffff897d1b9a0708 R08: 0000000000000000 R09: 0000000000000000
  [139590.041815] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000013
  [139590.042159] R13: 0000000000000227 R14: ffff897cffcbba88 R15: 0000000000000001
  [139590.042501] FS:  00007f2efc8dee80(0000) GS:ffff897d36a80000(0000) knlGS:0000000000000000
  [139590.042847] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [139590.043199] CR2: 00007f8c064935e0 CR3: 0000000232252002 CR4: 00000000003606e0
  [139590.043547] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [139590.043899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [139590.044250] Call Trace:
  [139590.044631]  copy_items+0xa3f/0x1000 [btrfs]
  [139590.045009]  ? generic_bin_search.constprop.32+0x61/0x200 [btrfs]
  [139590.045396]  btrfs_log_inode+0x7b3/0xd70 [btrfs]
  [139590.045773]  btrfs_log_inode_parent+0x2b3/0xce0 [btrfs]
  [139590.046143]  ? do_raw_spin_unlock+0x49/0xc0
  [139590.046510]  btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
  [139590.046872]  btrfs_sync_file+0x3b6/0x440 [btrfs]
  [139590.047243]  btrfs_file_write_iter+0x45b/0x5c0 [btrfs]
  [139590.047592]  __vfs_write+0x129/0x1c0
  [139590.047932]  vfs_write+0xc2/0x1b0
  [139590.048270]  ksys_write+0x55/0xc0
  [139590.048608]  do_syscall_64+0x60/0x1b0
  [139590.048946]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [139590.049287] RIP: 0033:0x7f2efc4be190
  (...)
  [139590.050342] RSP: 002b:00007ffe743243a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  [139590.050701] RAX: ffffffffffffffda RBX: 0000000000008d58 RCX: 00007f2efc4be190
  [139590.051067] RDX: 0000000000008d58 RSI: 00005567eca0f370 RDI: 0000000000000003
  [139590.051459] RBP: 0000000000000024 R08: 0000000000000003 R09: 0000000000008d60
  [139590.051863] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000003
  [139590.052252] R13: 00000000003d3507 R14: 00005567eca0f370 R15: 0000000000000000
  (...)
  [139590.055128] ---[ end trace 193f35d0215cdeeb ]---

So fix this race between a full ranged fsync and writeback of adjacent
ranges by flushing all delalloc and waiting for all ordered extents to
complete before logging the inode. This is the simplest way to solve the
problem because currently the full fsync path does not deal with ranges
at all (it assumes a full range from 0 to LLONG_MAX) and it always needs
to look at adjacent ranges for hole detection. For use cases of ranged
fsyncs this can make a few fsyncs slower but on the other hand it can
make some following fsyncs to other ranges do less work or no need to do
anything at all. A full fsync is rare anyway and happens only once after
loading/creating an inode and once after less common operations such as a
shrinking truncate.

This is an issue that exists for a long time, and was often triggered by
generic/127, because it does mmap'ed writes and msync (which triggers a
ranged fsync). Adding support for the tree checker to detect overlapping
extents (next patch in the series) and trigger a WARN() when such cases
are found, and then calling btrfs_check_leaf_full() at the end of
btrfs_insert_file_extent() made the issue much easier to detect. Running
btrfs/072 with that change to the tree checker and making fsstress open
files always with O_SYNC made it much easier to trigger the issue (as
triggering it with generic/127 is very rare).

CC: stable@vger.kernel.org # 3.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/file.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2059,6 +2059,18 @@ int btrfs_sync_file(struct file *file, l
 	u64 len;
 
 	/*
+	 * If the inode needs a full sync, make sure we use a full range to
+	 * avoid log tree corruption, due to hole detection racing with ordered
+	 * extent completion for adjacent ranges, and assertion failures during
+	 * hole detection.
+	 */
+	if (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
+		     &BTRFS_I(inode)->runtime_flags)) {
+		start = 0;
+		end = LLONG_MAX;
+	}
+
+	/*
 	 * The range length can be represented by u64, we have to do the typecasts
 	 * to avoid signed overflow if it's [0, LLONG_MAX] eg. from fsync()
 	 */

[PATCH 4.19 021/276] btrfs: sysfs: Fix error path kobject memory leak

[Greg Kroah-Hartman]

From: Tobin C. Harding <tobin@kernel.org>

commit 450ff8348808a89cc27436771aa05c2b90c0eef1 upstream.

If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.

Calling kobject_put() when kobject_init_and_add() fails drops the
refcount back to 0 and calls the ktype release method (which in turn
calls the percpu destroy and kfree).

Add call to kobject_put() in the error path of call to
kobject_init_and_add().

Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/extent-tree.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3911,8 +3911,7 @@ static int create_space_info(struct btrf
 				    info->space_info_kobj, "%s",
 				    alloc_name(space_info->flags));
 	if (ret) {
-		percpu_counter_destroy(&space_info->total_bytes_pinned);
-		kfree(space_info);
+		kobject_put(&space_info->kobj);
 		return ret;
 	}
 

[PATCH 4.19 022/276] btrfs: sysfs: dont leak memory when failing add fsid

[Greg Kroah-Hartman]

From: Tobin C. Harding <tobin@kernel.org>

commit e32773357d5cc271b1d23550b3ed026eb5c2a468 upstream.

A failed call to kobject_init_and_add() must be followed by a call to
kobject_put().  Currently in the error path when adding fs_devices we
are missing this call.  This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.

Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails.  open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).

Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/sysfs.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -811,7 +811,12 @@ int btrfs_sysfs_add_fsid(struct btrfs_fs
 	fs_devs->fsid_kobj.kset = btrfs_kset;
 	error = kobject_init_and_add(&fs_devs->fsid_kobj,
 				&btrfs_ktype, parent, "%pU", fs_devs->fsid);
-	return error;
+	if (error) {
+		kobject_put(&fs_devs->fsid_kobj);
+		return error;
+	}
+
+	return 0;
 }
 
 int btrfs_sysfs_add_mounted(struct btrfs_fs_info *fs_info)

[PATCH 4.19 023/276] udlfb: fix some inconsistent NULL checking

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit c143a559b073aeea688b9bb7c5b46f3cf322d569 upstream.

In the current kernel, then kzalloc() can't fail for small allocations,
but if it did fail then we would have a NULL dereference in the error
handling.  Also in dlfb_usb_disconnect() if "info" were NULL then it
would cause an Oops inside the unregister_framebuffer() function but it
can't be NULL so let's remove that check.

Fixes: 68a958a915ca ("udlfb: handle unplug properly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Wen Yang <wen.yang99@zte.com.cn>
[b.zolnierkie: added "Fixes:" tag]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/udlfb.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1659,7 +1659,7 @@ static int dlfb_usb_probe(struct usb_int
 	dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
 	if (!dlfb) {
 		dev_err(&intf->dev, "%s: failed to allocate dlfb\n", __func__);
-		goto error;
+		return -ENOMEM;
 	}
 
 	INIT_LIST_HEAD(&dlfb->deferred_free);
@@ -1769,7 +1769,7 @@ static int dlfb_usb_probe(struct usb_int
 error:
 	if (dlfb->info) {
 		dlfb_ops_destroy(dlfb->info);
-	} else if (dlfb) {
+	} else {
 		usb_put_dev(dlfb->udev);
 		kfree(dlfb);
 	}
@@ -1796,12 +1796,10 @@ static void dlfb_usb_disconnect(struct u
 	/* this function will wait for all in-flight urbs to complete */
 	dlfb_free_urb_list(dlfb);
 
-	if (info) {
-		/* remove udlfb's sysfs interfaces */
-		for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
-			device_remove_file(info->dev, &fb_device_attrs[i]);
-		device_remove_bin_file(info->dev, &edid_attr);
-	}
+	/* remove udlfb's sysfs interfaces */
+	for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
+		device_remove_file(info->dev, &fb_device_attrs[i]);
+	device_remove_bin_file(info->dev, &edid_attr);
 
 	unregister_framebuffer(info);
 }

[PATCH 4.19 024/276] fbdev: fix divide error in fb_var_to_videomode

[Greg Kroah-Hartman]

From: Shile Zhang <shile.zhang@linux.alibaba.com>

commit cf84807f6dd0be5214378e66460cfc9187f532f9 upstream.

To fix following divide-by-zero error found by Syzkaller:

  divide error: 0000 [#1] SMP PTI
  CPU: 7 PID: 8447 Comm: test Kdump: loaded Not tainted 4.19.24-8.al7.x86_64 #1
  Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:fb_var_to_videomode+0xae/0xc0
  Code: 04 44 03 46 78 03 4e 7c 44 03 46 68 03 4e 70 89 ce d1 ee 69 c0 e8 03 00 00 f6 c2 01 0f 45 ce 83 e2 02 8d 34 09 0f 45 ce 31 d2 <41> f7 f0 31 d2 f7 f1 89 47 08 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00
  RSP: 0018:ffffb7e189347bf0 EFLAGS: 00010246
  RAX: 00000000e1692410 RBX: ffffb7e189347d60 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb7e189347c10
  RBP: ffff99972a091c00 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000100
  R13: 0000000000010000 R14: 00007ffd66baf6d0 R15: 0000000000000000
  FS:  00007f2054d11740(0000) GS:ffff99972fbc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f205481fd20 CR3: 00000004288a0001 CR4: 00000000001606a0
  Call Trace:
   fb_set_var+0x257/0x390
   ? lookup_fast+0xbb/0x2b0
   ? fb_open+0xc0/0x140
   ? chrdev_open+0xa6/0x1a0
   do_fb_ioctl+0x445/0x5a0
   do_vfs_ioctl+0x92/0x5f0
   ? __alloc_fd+0x3d/0x160
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x5b/0x190
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f20548258d7
  Code: 44 00 00 48 8b 05 b9 15 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 15 2d 00 f7 d8 64 89 01 48

It can be triggered easily with following test code:

  #include <linux/fb.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  int main(void)
  {
          struct fb_var_screeninfo var = {.activate = 0x100, .pixclock = 60};
          int fd = open("/dev/fb0", O_RDWR);
          if (fd < 0)
                  return 1;

          if (ioctl(fd, FBIOPUT_VSCREENINFO, &var))
                  return 1;

          return 0;
  }

Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Fredrik Noring <noring@nocrew.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/core/modedb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -935,6 +935,9 @@ void fb_var_to_videomode(struct fb_video
 	if (var->vmode & FB_VMODE_DOUBLE)
 		vtotal *= 2;
 
+	if (!htotal || !vtotal)
+		return;
+
 	hfreq = pixclock/htotal;
 	mode->refresh = hfreq/vtotal;
 }

[PATCH 4.19 025/276] NFSv4.2 fix unnecessary retry in nfs4_copy_file_range

[Greg Kroah-Hartman]

From: Olga Kornievskaia <olga.kornievskaia@gmail.com>

commit 45ac486ecf2dc998e25cf32f0cabf2deaad875be upstream.

Currently nfs42_proc_copy_file_range() can not return EAGAIN.

Fixes: e4648aa4f98a ("NFS recover from destination server reboot for copies")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4file.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -133,15 +133,9 @@ static ssize_t nfs4_copy_file_range(stru
 				    struct file *file_out, loff_t pos_out,
 				    size_t count, unsigned int flags)
 {
-	ssize_t ret;
-
 	if (file_inode(file_in) == file_inode(file_out))
 		return -EINVAL;
-retry:
-	ret = nfs42_proc_copy(file_in, pos_in, file_out, pos_out, count);
-	if (ret == -EAGAIN)
-		goto retry;
-	return ret;
+	return nfs42_proc_copy(file_in, pos_in, file_out, pos_out, count);
 }
 
 static loff_t nfs4_file_llseek(struct file *filep, loff_t offset, int whence)

[PATCH 4.19 026/276] NFSv4.1 fix incorrect return value in copy_file_range

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

commit 0769663b4f580566ef6cdf366f3073dbe8022c39 upstream.

According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.

Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Yu Xu <xuyu@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs42proc.c |    3 ---
 fs/nfs/nfs4file.c  |    4 +++-
 2 files changed, 3 insertions(+), 4 deletions(-)

--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -329,9 +329,6 @@ ssize_t nfs42_proc_copy(struct file *src
 	};
 	ssize_t err, err2;
 
-	if (!nfs_server_capable(file_inode(dst), NFS_CAP_COPY))
-		return -EOPNOTSUPP;
-
 	src_lock = nfs_get_lock_context(nfs_file_open_context(src));
 	if (IS_ERR(src_lock))
 		return PTR_ERR(src_lock);
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -133,8 +133,10 @@ static ssize_t nfs4_copy_file_range(stru
 				    struct file *file_out, loff_t pos_out,
 				    size_t count, unsigned int flags)
 {
+	if (!nfs_server_capable(file_inode(file_out), NFS_CAP_COPY))
+		return -EOPNOTSUPP;
 	if (file_inode(file_in) == file_inode(file_out))
-		return -EINVAL;
+		return -EOPNOTSUPP;
 	return nfs42_proc_copy(file_in, pos_in, file_out, pos_out, count);
 }
 

[PATCH 4.19 027/276] bpf: add bpf_jit_limit knob to restrict unpriv allocations

[Greg Kroah-Hartman]

From: Daniel Borkmann <daniel@iogearbox.net>

commit ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.

Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.

Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.

Fixes: 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/sysctl/net.txt |    8 +++++++
 include/linux/filter.h       |    1 
 kernel/bpf/core.c            |   49 ++++++++++++++++++++++++++++++++++++++++---
 net/core/sysctl_net_core.c   |   10 +++++++-
 4 files changed, 63 insertions(+), 5 deletions(-)

--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -92,6 +92,14 @@ Values :
 	0 - disable JIT kallsyms export (default value)
 	1 - enable JIT kallsyms export for privileged users only
 
+bpf_jit_limit
+-------------
+
+This enforces a global limit for memory allocations to the BPF JIT
+compiler in order to reject unprivileged JIT requests once it has
+been surpassed. bpf_jit_limit contains the value of the global limit
+in bytes.
+
 dev_weight
 --------------
 
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -836,6 +836,7 @@ bpf_run_sk_reuseport(struct sock_reusepo
 extern int bpf_jit_enable;
 extern int bpf_jit_harden;
 extern int bpf_jit_kallsyms;
+extern int bpf_jit_limit;
 
 typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
 
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -366,10 +366,13 @@ void bpf_prog_kallsyms_del_all(struct bp
 }
 
 #ifdef CONFIG_BPF_JIT
+# define BPF_JIT_LIMIT_DEFAULT	(PAGE_SIZE * 40000)
+
 /* All BPF JIT sysctl knobs here. */
 int bpf_jit_enable   __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON);
 int bpf_jit_harden   __read_mostly;
 int bpf_jit_kallsyms __read_mostly;
+int bpf_jit_limit    __read_mostly = BPF_JIT_LIMIT_DEFAULT;
 
 static __always_inline void
 bpf_get_prog_addr_region(const struct bpf_prog *prog,
@@ -578,27 +581,64 @@ int bpf_get_kallsym(unsigned int symnum,
 	return ret;
 }
 
+static atomic_long_t bpf_jit_current;
+
+#if defined(MODULES_VADDR)
+static int __init bpf_jit_charge_init(void)
+{
+	/* Only used as heuristic here to derive limit. */
+	bpf_jit_limit = min_t(u64, round_up((MODULES_END - MODULES_VADDR) >> 2,
+					    PAGE_SIZE), INT_MAX);
+	return 0;
+}
+pure_initcall(bpf_jit_charge_init);
+#endif
+
+static int bpf_jit_charge_modmem(u32 pages)
+{
+	if (atomic_long_add_return(pages, &bpf_jit_current) >
+	    (bpf_jit_limit >> PAGE_SHIFT)) {
+		if (!capable(CAP_SYS_ADMIN)) {
+			atomic_long_sub(pages, &bpf_jit_current);
+			return -EPERM;
+		}
+	}
+
+	return 0;
+}
+
+static void bpf_jit_uncharge_modmem(u32 pages)
+{
+	atomic_long_sub(pages, &bpf_jit_current);
+}
+
 struct bpf_binary_header *
 bpf_jit_binary_alloc(unsigned int proglen, u8 **image_ptr,
 		     unsigned int alignment,
 		     bpf_jit_fill_hole_t bpf_fill_ill_insns)
 {
 	struct bpf_binary_header *hdr;
-	unsigned int size, hole, start;
+	u32 size, hole, start, pages;
 
 	/* Most of BPF filters are really small, but if some of them
 	 * fill a page, allow at least 128 extra bytes to insert a
 	 * random section of illegal instructions.
 	 */
 	size = round_up(proglen + sizeof(*hdr) + 128, PAGE_SIZE);
+	pages = size / PAGE_SIZE;
+
+	if (bpf_jit_charge_modmem(pages))
+		return NULL;
 	hdr = module_alloc(size);
-	if (hdr == NULL)
+	if (!hdr) {
+		bpf_jit_uncharge_modmem(pages);
 		return NULL;
+	}
 
 	/* Fill space with illegal/arch-dep instructions. */
 	bpf_fill_ill_insns(hdr, size);
 
-	hdr->pages = size / PAGE_SIZE;
+	hdr->pages = pages;
 	hole = min_t(unsigned int, size - (proglen + sizeof(*hdr)),
 		     PAGE_SIZE - sizeof(*hdr));
 	start = (get_random_int() % hole) & ~(alignment - 1);
@@ -611,7 +651,10 @@ bpf_jit_binary_alloc(unsigned int progle
 
 void bpf_jit_binary_free(struct bpf_binary_header *hdr)
 {
+	u32 pages = hdr->pages;
+
 	module_memfree(hdr);
+	bpf_jit_uncharge_modmem(pages);
 }
 
 /* This symbol is only overridden by archs that have different
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -279,7 +279,6 @@ static int proc_dointvec_minmax_bpf_enab
 	return ret;
 }
 
-# ifdef CONFIG_HAVE_EBPF_JIT
 static int
 proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
 				    void __user *buffer, size_t *lenp,
@@ -290,7 +289,6 @@ proc_dointvec_minmax_bpf_restricted(stru
 
 	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 }
-# endif
 #endif
 
 static struct ctl_table net_core_table[] = {
@@ -397,6 +395,14 @@ static struct ctl_table net_core_table[]
 		.extra2		= &one,
 	},
 # endif
+	{
+		.procname	= "bpf_jit_limit",
+		.data		= &bpf_jit_limit,
+		.maxlen		= sizeof(int),
+		.mode		= 0600,
+		.proc_handler	= proc_dointvec_minmax_bpf_restricted,
+		.extra1		= &one,
+	},
 #endif
 	{
 		.procname	= "netdev_tstamp_prequeue",

[PATCH 4.19 028/276] brcmfmac: assure SSID length from firmware is limited

[Greg Kroah-Hartman]

From: Arend van Spriel <arend.vanspriel@broadcom.com>

commit 1b5e2423164b3670e8bc9174e4762d297990deff upstream.

The SSID length as received from firmware should not exceed
IEEE80211_MAX_SSID_LEN as that would result in heap overflow.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3466,6 +3466,8 @@ brcmf_wowl_nd_results(struct brcmf_if *i
 	}
 
 	netinfo = brcmf_get_netinfo_array(pfn_result);
+	if (netinfo->SSID_len > IEEE80211_MAX_SSID_LEN)
+		netinfo->SSID_len = IEEE80211_MAX_SSID_LEN;
 	memcpy(cfg->wowl.nd->ssid.ssid, netinfo->SSID, netinfo->SSID_len);
 	cfg->wowl.nd->ssid.ssid_len = netinfo->SSID_len;
 	cfg->wowl.nd->n_channels = 1;

[PATCH 4.19 029/276] brcmfmac: add subtype check for event handling in data path

[Greg Kroah-Hartman]

From: Arend van Spriel <arend.vanspriel@broadcom.com>

commit a4176ec356c73a46c07c181c6d04039fafa34a9f upstream.

For USB there is no separate channel being used to pass events
from firmware to the host driver and as such are passed over the
data path. In order to detect mock event messages an additional
check is needed on event subtype. This check is added conditionally
using unlikely() keyword.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c   |    5 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h   |   16 ++++++++++----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c |    2 -
 3 files changed, 16 insertions(+), 7 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -464,7 +464,8 @@ void brcmf_rx_frame(struct device *dev,
 	} else {
 		/* Process special event packets */
 		if (handle_event)
-			brcmf_fweh_process_skb(ifp->drvr, skb);
+			brcmf_fweh_process_skb(ifp->drvr, skb,
+					       BCMILCP_SUBTYPE_VENDOR_LONG);
 
 		brcmf_netif_rx(ifp, skb);
 	}
@@ -481,7 +482,7 @@ void brcmf_rx_event(struct device *dev,
 	if (brcmf_rx_hdrpull(drvr, skb, &ifp))
 		return;
 
-	brcmf_fweh_process_skb(ifp->drvr, skb);
+	brcmf_fweh_process_skb(ifp->drvr, skb, 0);
 	brcmu_pkt_buf_free_skb(skb);
 }
 
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
@@ -211,7 +211,7 @@ enum brcmf_fweh_event_code {
  */
 #define BRCM_OUI				"\x00\x10\x18"
 #define BCMILCP_BCM_SUBTYPE_EVENT		1
-
+#define BCMILCP_SUBTYPE_VENDOR_LONG		32769
 
 /**
  * struct brcm_ethhdr - broadcom specific ether header.
@@ -334,10 +334,10 @@ void brcmf_fweh_process_event(struct brc
 void brcmf_fweh_p2pdev_setup(struct brcmf_if *ifp, bool ongoing);
 
 static inline void brcmf_fweh_process_skb(struct brcmf_pub *drvr,
-					  struct sk_buff *skb)
+					  struct sk_buff *skb, u16 stype)
 {
 	struct brcmf_event *event_packet;
-	u16 usr_stype;
+	u16 subtype, usr_stype;
 
 	/* only process events when protocol matches */
 	if (skb->protocol != cpu_to_be16(ETH_P_LINK_CTL))
@@ -346,8 +346,16 @@ static inline void brcmf_fweh_process_sk
 	if ((skb->len + ETH_HLEN) < sizeof(*event_packet))
 		return;
 
-	/* check for BRCM oui match */
 	event_packet = (struct brcmf_event *)skb_mac_header(skb);
+
+	/* check subtype if needed */
+	if (unlikely(stype)) {
+		subtype = get_unaligned_be16(&event_packet->hdr.subtype);
+		if (subtype != stype)
+			return;
+	}
+
+	/* check for BRCM oui match */
 	if (memcmp(BRCM_OUI, &event_packet->hdr.oui[0],
 		   sizeof(event_packet->hdr.oui)))
 		return;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
@@ -1116,7 +1116,7 @@ static void brcmf_msgbuf_process_event(s
 
 	skb->protocol = eth_type_trans(skb, ifp->ndev);
 
-	brcmf_fweh_process_skb(ifp->drvr, skb);
+	brcmf_fweh_process_skb(ifp->drvr, skb, 0);
 
 exit:
 	brcmu_pkt_buf_free_skb(skb);

[PATCH 4.19 030/276] arm64: errata: Add workaround for Cortex-A76 erratum #1463225

[Greg Kroah-Hartman]

From: Will Deacon <will.deacon@arm.com>

commit 969f5ea627570e91c9d54403287ee3ed657f58fe upstream.

Revisions of the Cortex-A76 CPU prior to r4p0 are affected by an erratum
that can prevent interrupts from being taken when single-stepping.

This patch implements a software workaround to prevent userspace from
effectively being able to disable interrupts.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 Documentation/arm64/silicon-errata.txt |    1 
 arch/arm64/Kconfig                     |   18 ++++++++++++++++
 arch/arm64/include/asm/cpucaps.h       |    3 +-
 arch/arm64/include/asm/cputype.h       |    2 +
 arch/arm64/kernel/cpu_errata.c         |   24 +++++++++++++++++++++
 arch/arm64/kernel/syscall.c            |   31 +++++++++++++++++++++++++++
 arch/arm64/mm/fault.c                  |   37 +++++++++++++++++++++++++++++++--
 7 files changed, 113 insertions(+), 3 deletions(-)

--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@@ -58,6 +58,7 @@ stable kernels.
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
+| ARM            | Cortex-A76      | #1463225        | ARM64_ERRATUM_1463225       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -479,6 +479,24 @@ config ARM64_ERRATUM_1024718
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_1463225
+	bool "Cortex-A76: Software Step might prevent interrupt recognition"
+	default y
+	help
+	  This option adds a workaround for Arm Cortex-A76 erratum 1463225.
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p1), software stepping
+	  of a system call instruction (SVC) can prevent recognition of
+	  subsequent interrupts when software stepping is disabled in the
+	  exception handler of the system call and either kernel debugging
+	  is enabled or VHE is in use.
+
+	  Work around the erratum by triggering a dummy step exception
+	  when handling a system call from a task that is being stepped
+	  in a VHE configuration of the kernel.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -51,7 +51,8 @@
 #define ARM64_SSBD				30
 #define ARM64_MISMATCHED_CACHE_TYPE		31
 #define ARM64_HAS_STAGE2_FWB			32
+#define ARM64_WORKAROUND_1463225		33
 
-#define ARM64_NCAPS				33
+#define ARM64_NCAPS				34
 
 #endif /* __ASM_CPUCAPS_H */
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -86,6 +86,7 @@
 #define ARM_CPU_PART_CORTEX_A75		0xD0A
 #define ARM_CPU_PART_CORTEX_A35		0xD04
 #define ARM_CPU_PART_CORTEX_A55		0xD05
+#define ARM_CPU_PART_CORTEX_A76		0xD0B
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -110,6 +111,7 @@
 #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75)
 #define MIDR_CORTEX_A35 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A35)
 #define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55)
+#define MIDR_CORTEX_A76 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -411,6 +411,22 @@ static bool has_ssbd_mitigation(const st
 }
 #endif	/* CONFIG_ARM64_SSBD */
 
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+DEFINE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
+
+static bool
+has_cortex_a76_erratum_1463225(const struct arm64_cpu_capabilities *entry,
+			       int scope)
+{
+	u32 midr = read_cpuid_id();
+	/* Cortex-A76 r0p0 - r3p1 */
+	struct midr_range range = MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1);
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return is_midr_in_range(midr, &range) && is_kernel_in_hyp_mode();
+}
+#endif
+
 #define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max)	\
 	.matches = is_affected_midr_range,			\
 	.midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max)
@@ -680,6 +696,14 @@ const struct arm64_cpu_capabilities arm6
 		.matches = has_ssbd_mitigation,
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+	{
+		.desc = "ARM erratum 1463225",
+		.capability = ARM64_WORKAROUND_1463225,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_cortex_a76_erratum_1463225,
+	},
+#endif
 	{
 	}
 };
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -8,6 +8,7 @@
 #include <linux/syscalls.h>
 
 #include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
 #include <asm/fpsimd.h>
 #include <asm/syscall.h>
 #include <asm/thread_info.h>
@@ -60,6 +61,35 @@ static inline bool has_syscall_work(unsi
 int syscall_trace_enter(struct pt_regs *regs);
 void syscall_trace_exit(struct pt_regs *regs);
 
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
+
+static void cortex_a76_erratum_1463225_svc_handler(void)
+{
+	u32 reg, val;
+
+	if (!unlikely(test_thread_flag(TIF_SINGLESTEP)))
+		return;
+
+	if (!unlikely(this_cpu_has_cap(ARM64_WORKAROUND_1463225)))
+		return;
+
+	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 1);
+	reg = read_sysreg(mdscr_el1);
+	val = reg | DBG_MDSCR_SS | DBG_MDSCR_KDE;
+	write_sysreg(val, mdscr_el1);
+	asm volatile("msr daifclr, #8");
+	isb();
+
+	/* We will have taken a single-step exception by this point */
+
+	write_sysreg(reg, mdscr_el1);
+	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0);
+}
+#else
+static void cortex_a76_erratum_1463225_svc_handler(void) { }
+#endif /* CONFIG_ARM64_ERRATUM_1463225 */
+
 static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 			   const syscall_fn_t syscall_table[])
 {
@@ -68,6 +98,7 @@ static void el0_svc_common(struct pt_reg
 	regs->orig_x0 = regs->regs[0];
 	regs->syscallno = scno;
 
+	cortex_a76_erratum_1463225_svc_handler();
 	local_daif_restore(DAIF_PROCCTX);
 	user_exit();
 
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -827,14 +827,47 @@ void __init hook_debug_fault_code(int nr
 	debug_fault_info[nr].name	= name;
 }
 
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
+
+static int __exception
+cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa))
+		return 0;
+
+	/*
+	 * We've taken a dummy step exception from the kernel to ensure
+	 * that interrupts are re-enabled on the syscall path. Return back
+	 * to cortex_a76_erratum_1463225_svc_handler() with debug exceptions
+	 * masked so that we can safely restore the mdscr and get on with
+	 * handling the syscall.
+	 */
+	regs->pstate |= PSR_D_BIT;
+	return 1;
+}
+#else
+static int __exception
+cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+{
+	return 0;
+}
+#endif /* CONFIG_ARM64_ERRATUM_1463225 */
+
 asmlinkage int __exception do_debug_exception(unsigned long addr_if_watchpoint,
-					      unsigned int esr,
-					      struct pt_regs *regs)
+					       unsigned int esr,
+					       struct pt_regs *regs)
 {
 	const struct fault_info *inf = debug_fault_info + DBG_ESR_EVT(esr);
 	unsigned long pc = instruction_pointer(regs);
 	int rv;
 
+	if (cortex_a76_erratum_1463225_debug_handler(regs))
+		return 0;
+
 	/*
 	 * Tell lockdep we disabled irqs in entry.S. Do nothing if they were
 	 * already disabled to preserve the last enabled/disabled addresses.

[PATCH 4.19 031/276] btrfs: honor path->skip_locking in backref code

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 38e3eebff643db725633657d1d87a3be019d1018 upstream.

Qgroups will do the old roots lookup at delayed ref time, which could be
while walking down the extent root while running a delayed ref.  This
should be fine, except we specifically lock eb's in the backref walking
code irrespective of path->skip_locking, which deadlocks the system.
Fix up the backref code to honor path->skip_locking, nobody will be
modifying the commit_root when we're searching so it's completely safe
to do.

This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans"), kernel may lockup with quota
enabled.

There is one backref trace triggered by snapshot dropping along with
write operation in the source subvolume.  The example can be reliably
reproduced:

  btrfs-cleaner   D    0  4062      2 0x80000000
  Call Trace:
   schedule+0x32/0x90
   btrfs_tree_read_lock+0x93/0x130 [btrfs]
   find_parent_nodes+0x29b/0x1170 [btrfs]
   btrfs_find_all_roots_safe+0xa8/0x120 [btrfs]
   btrfs_find_all_roots+0x57/0x70 [btrfs]
   btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
   btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs]
   btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs]
   do_walk_down+0x541/0x5e3 [btrfs]
   walk_down_tree+0xab/0xe7 [btrfs]
   btrfs_drop_snapshot+0x356/0x71a [btrfs]
   btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs]
   cleaner_kthread+0x12b/0x160 [btrfs]
   kthread+0x112/0x130
   ret_from_fork+0x27/0x50

When dropping snapshots with qgroup enabled, we will trigger backref
walk.

However such backref walk at that timing is pretty dangerous, as if one
of the parent nodes get WRITE locked by other thread, we could cause a
dead lock.

For example:

           FS 260     FS 261 (Dropped)
            node A        node B
           /      \      /      \
       node C      node D      node E
      /   \         /  \        /     \
  leaf F|leaf G|leaf H|leaf I|leaf J|leaf K

The lock sequence would be:

      Thread A (cleaner)             |       Thread B (other writer)
-----------------------------------------------------------------------
write_lock(B)                        |
write_lock(D)                        |
^^^ called by walk_down_tree()       |
                                     |       write_lock(A)
                                     |       write_lock(D) << Stall
read_lock(H) << for backref walk     |
read_lock(D) << lock owner is        |
                the same thread A    |
                so read lock is OK   |
read_lock(A) << Stall                |

So thread A hold write lock D, and needs read lock A to unlock.
While thread B holds write lock A, while needs lock D to unlock.

This will cause a deadlock.

This is not only limited to snapshot dropping case.  As the backref
walk, even only happens on commit trees, is breaking the normal top-down
locking order, makes it deadlock prone.

Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: David Sterba <dsterba@suse.com>
Reported-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ rebase to latest branch and fix lock assert bug in btrfs/007 ]
[ backport to linux-4.19.y branch, solve minor conflicts ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy logs and deadlock analysis from Qu's patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/backref.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -710,7 +710,7 @@ out:
  * read tree blocks and add keys where required.
  */
 static int add_missing_keys(struct btrfs_fs_info *fs_info,
-			    struct preftrees *preftrees)
+			    struct preftrees *preftrees, bool lock)
 {
 	struct prelim_ref *ref;
 	struct extent_buffer *eb;
@@ -735,12 +735,14 @@ static int add_missing_keys(struct btrfs
 			free_extent_buffer(eb);
 			return -EIO;
 		}
-		btrfs_tree_read_lock(eb);
+		if (lock)
+			btrfs_tree_read_lock(eb);
 		if (btrfs_header_level(eb) == 0)
 			btrfs_item_key_to_cpu(eb, &ref->key_for_search, 0);
 		else
 			btrfs_node_key_to_cpu(eb, &ref->key_for_search, 0);
-		btrfs_tree_read_unlock(eb);
+		if (lock)
+			btrfs_tree_read_unlock(eb);
 		free_extent_buffer(eb);
 		prelim_ref_insert(fs_info, &preftrees->indirect, ref, NULL);
 		cond_resched();
@@ -1225,7 +1227,7 @@ again:
 
 	btrfs_release_path(path);
 
-	ret = add_missing_keys(fs_info, &preftrees);
+	ret = add_missing_keys(fs_info, &preftrees, path->skip_locking == 0);
 	if (ret)
 		goto out;
 
@@ -1286,11 +1288,14 @@ again:
 					ret = -EIO;
 					goto out;
 				}
-				btrfs_tree_read_lock(eb);
-				btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+				if (!path->skip_locking) {
+					btrfs_tree_read_lock(eb);
+					btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+				}
 				ret = find_extent_in_eb(eb, bytenr,
 							*extent_item_pos, &eie, ignore_offset);
-				btrfs_tree_read_unlock_blocking(eb);
+				if (!path->skip_locking)
+					btrfs_tree_read_unlock_blocking(eb);
 				free_extent_buffer(eb);
 				if (ret < 0)
 					goto out;

[PATCH 4.19 032/276] ovl: relax WARN_ON() for overlapping layers use case

[Greg Kroah-Hartman]

From: Amir Goldstein <amir73il@gmail.com>

commit acf3062a7e1ccf67c6f7e7c28671a6708fde63b0 upstream.

This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000

Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:

  mkdir foo work
  mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"

The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.

The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.

On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.

Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.

The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().

Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc9568 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/dir.c   |    2 +-
 fs/overlayfs/inode.c |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -260,7 +260,7 @@ static int ovl_instantiate(struct dentry
 		 * hashed directory inode aliases.
 		 */
 		inode = ovl_get_inode(dentry->d_sb, &oip);
-		if (WARN_ON(IS_ERR(inode)))
+		if (IS_ERR(inode))
 			return PTR_ERR(inode);
 	} else {
 		WARN_ON(ovl_inode_real(inode) != d_inode(newdentry));
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -832,7 +832,7 @@ struct inode *ovl_get_inode(struct super
 	int fsid = bylower ? oip->lowerpath->layer->fsid : 0;
 	bool is_dir, metacopy = false;
 	unsigned long ino = 0;
-	int err = -ENOMEM;
+	int err = oip->newinode ? -EEXIST : -ENOMEM;
 
 	if (!realinode)
 		realinode = d_inode(lowerdentry);
@@ -917,6 +917,7 @@ out:
 	return inode;
 
 out_err:
+	pr_warn_ratelimited("overlayfs: failed to get inode (%i)\n", err);
 	inode = ERR_PTR(err);
 	goto out;
 }

[PATCH 4.19 033/276] fbdev: fix WARNING in __alloc_pages_nodemask bug

[Greg Kroah-Hartman]

From: Jiufei Xue <jiufei.xue@linux.alibaba.com>

commit 8c40292be9169a9cbe19aadd1a6fc60cbd1af82f upstream.

Syzkaller hit 'WARNING in __alloc_pages_nodemask' bug.

WARNING: CPU: 1 PID: 1473 at mm/page_alloc.c:4377
__alloc_pages_nodemask+0x4da/0x2130
Kernel panic - not syncing: panic_on_warn set ...

Call Trace:
 alloc_pages_current+0xb1/0x1e0
 kmalloc_order+0x1f/0x60
 kmalloc_order_trace+0x1d/0x120
 fb_alloc_cmap_gfp+0x85/0x2b0
 fb_set_user_cmap+0xff/0x370
 do_fb_ioctl+0x949/0xa20
 fb_ioctl+0xdd/0x120
 do_vfs_ioctl+0x186/0x1070
 ksys_ioctl+0x89/0xa0
 __x64_sys_ioctl+0x74/0xb0
 do_syscall_64+0xc8/0x550
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is a warning about order >= MAX_ORDER and the order is from
userspace ioctl. Add flag __NOWARN to silence this warning.

Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/core/fbcmap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/video/fbdev/core/fbcmap.c
+++ b/drivers/video/fbdev/core/fbcmap.c
@@ -94,6 +94,8 @@ int fb_alloc_cmap_gfp(struct fb_cmap *cm
 	int size = len * sizeof(u16);
 	int ret = -ENOMEM;
 
+	flags |= __GFP_NOWARN;
+
 	if (cmap->len != len) {
 		fb_dealloc_cmap(cmap);
 		if (!len)

[PATCH 4.19 034/276] media: cpia2: Fix use-after-free in cpia2_exit

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit dea37a97265588da604c6ba80160a287b72c7bfd upstream.

Syzkaller report this:

BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr ffff8881f59a6b70 by task syz-executor.0/8363

CPU: 0 PID: 8363 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 usb_remove_newid_files drivers/usb/core/driver.c:212 [inline]
 usb_deregister+0x12a/0x3b0 drivers/usb/core/driver.c:1005
 cpia2_exit+0xa/0x16 [cpia2]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f86f3754c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000300
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f86f37556bc
R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff

Allocated by task 8363:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
 usb_register_driver+0x267/0x520 drivers/usb/core/driver.c:965
 0xffffffffc1b4817c
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8363:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
 slab_free_hook mm/slub.c:1430 [inline]
 slab_free_freelist_hook mm/slub.c:1457 [inline]
 slab_free mm/slub.c:3005 [inline]
 kfree+0xe1/0x270 mm/slub.c:3957
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
 usb_register_driver+0x341/0x520 drivers/usb/core/driver.c:980
 0xffffffffc1b4817c
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881f59a6b40
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
 256-byte region [ffff8881f59a6b40, ffff8881f59a6c40)
The buggy address belongs to the page:
page:ffffea0007d66980 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6c02e00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881f59a6a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881f59a6a80: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
>ffff8881f59a6b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881f59a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881f59a6c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

cpia2_init does not check return value of cpia2_init, if it failed
in usb_register_driver, there is already cleanup using driver_unregister.
No need call cpia2_usb_cleanup on module exit.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/cpia2/cpia2_v4l.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/media/usb/cpia2/cpia2_v4l.c
+++ b/drivers/media/usb/cpia2/cpia2_v4l.c
@@ -1244,8 +1244,7 @@ static int __init cpia2_init(void)
 	LOG("%s v%s\n",
 	    ABOUT, CPIA_VERSION);
 	check_parameters();
-	cpia2_usb_init();
-	return 0;
+	return cpia2_usb_init();
 }
 
 

[PATCH 4.19 035/276] media: serial_ir: Fix use-after-free in serial_ir_init_module

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream.

Syzkaller report this:

BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249

CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 ? 0xffffffffc1728000
 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 remove_bind_files drivers/base/bus.c:585 [inline]
 bus_remove_driver+0x186/0x220 drivers/base/bus.c:725
 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
 serial_ir_init_module+0x169/0x1000 [serial_ir]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 6249:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 bus_add_driver+0xc0/0x610 drivers/base/bus.c:651
 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170
 serial_ir_init_module+0xe8/0x1000 [serial_ir]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 6249:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457
 slab_free_hook mm/slub.c:1430 [inline]
 slab_free_freelist_hook mm/slub.c:1457 [inline]
 slab_free mm/slub.c:3005 [inline]
 kfree+0xe1/0x270 mm/slub.c:3957
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732
 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197
 serial_ir_init_module+0x14c/0x1000 [serial_ir]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881dc7ae000
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 48 bytes inside of
 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100)
The buggy address belongs to the page:
page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                     ^
 ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00

There are already cleanup handlings in serial_ir_init error path,
no need to call serial_ir_exit do it again in serial_ir_init_module,
otherwise will trigger a use-after-free issue.

Fixes: fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/serial_ir.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -773,8 +773,6 @@ static void serial_ir_exit(void)
 
 static int __init serial_ir_init_module(void)
 {
-	int result;
-
 	switch (type) {
 	case IR_HOMEBREW:
 	case IR_IRDEO:
@@ -802,12 +800,7 @@ static int __init serial_ir_init_module(
 	if (sense != -1)
 		sense = !!sense;
 
-	result = serial_ir_init();
-	if (!result)
-		return 0;
-
-	serial_ir_exit();
-	return result;
+	return serial_ir_init();
 }
 
 static void __exit serial_ir_exit_module(void)

[PATCH 4.19 036/276] media: vb2: add waiting_in_dqbuf flag

[Greg Kroah-Hartman]

From: Hans Verkuil <hverkuil@xs4all.nl>

commit d65842f7126aa1a87fb44b7c9980c12630ed4f33 upstream.

Calling VIDIOC_DQBUF can release the core serialization lock pointed to
by vb2_queue->lock if it has to wait for a new buffer to arrive.

However, if userspace dup()ped the video device filehandle, then it is
possible to read or call DQBUF from two filehandles at the same time.

It is also possible to call REQBUFS from one filehandle while the other
is waiting for a buffer. This will remove all the buffers and reallocate
new ones. Removing all the buffers isn't the problem here (that's already
handled correctly by DQBUF), but the reallocating part is: DQBUF isn't
aware that the buffers have changed.

This is fixed by setting a flag whenever the lock is released while waiting
for a buffer to arrive. And checking the flag where needed so we can return
-EBUSY.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Syzbot <syzbot+4180ff9ca6810b06c1e9@syzkaller.appspotmail.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/common/videobuf2/videobuf2-core.c |   22 ++++++++++++++++++++++
 include/media/videobuf2-core.h                  |    1 +
 2 files changed, 23 insertions(+)

--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -668,6 +668,11 @@ int vb2_core_reqbufs(struct vb2_queue *q
 		return -EBUSY;
 	}
 
+	if (q->waiting_in_dqbuf && *count) {
+		dprintk(1, "another dup()ped fd is waiting for a buffer\n");
+		return -EBUSY;
+	}
+
 	if (*count == 0 || q->num_buffers != 0 ||
 	    (q->memory != VB2_MEMORY_UNKNOWN && q->memory != memory)) {
 		/*
@@ -797,6 +802,10 @@ int vb2_core_create_bufs(struct vb2_queu
 	}
 
 	if (!q->num_buffers) {
+		if (q->waiting_in_dqbuf && *count) {
+			dprintk(1, "another dup()ped fd is waiting for a buffer\n");
+			return -EBUSY;
+		}
 		memset(q->alloc_devs, 0, sizeof(q->alloc_devs));
 		q->memory = memory;
 		q->waiting_for_buffers = !q->is_output;
@@ -1466,6 +1475,11 @@ static int __vb2_wait_for_done_vb(struct
 	for (;;) {
 		int ret;
 
+		if (q->waiting_in_dqbuf) {
+			dprintk(1, "another dup()ped fd is waiting for a buffer\n");
+			return -EBUSY;
+		}
+
 		if (!q->streaming) {
 			dprintk(1, "streaming off, will not wait for buffers\n");
 			return -EINVAL;
@@ -1493,6 +1507,7 @@ static int __vb2_wait_for_done_vb(struct
 			return -EAGAIN;
 		}
 
+		q->waiting_in_dqbuf = 1;
 		/*
 		 * We are streaming and blocking, wait for another buffer to
 		 * become ready or for streamoff. Driver's lock is released to
@@ -1513,6 +1528,7 @@ static int __vb2_wait_for_done_vb(struct
 		 * the locks or return an error if one occurred.
 		 */
 		call_void_qop(q, wait_finish, q);
+		q->waiting_in_dqbuf = 0;
 		if (ret) {
 			dprintk(1, "sleep was interrupted\n");
 			return ret;
@@ -2361,6 +2377,12 @@ static size_t __vb2_perform_fileio(struc
 	if (!data)
 		return -EINVAL;
 
+	if (q->waiting_in_dqbuf) {
+		dprintk(3, "another dup()ped fd is %s\n",
+			read ? "reading" : "writing");
+		return -EBUSY;
+	}
+
 	/*
 	 * Initialize emulator on first call.
 	 */
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -551,6 +551,7 @@ struct vb2_queue {
 	unsigned int			start_streaming_called:1;
 	unsigned int			error:1;
 	unsigned int			waiting_for_buffers:1;
+	unsigned int			waiting_in_dqbuf:1;
 	unsigned int			is_multiplanar:1;
 	unsigned int			is_output:1;
 	unsigned int			copy_timestamp:1;

[PATCH 4.19 037/276] media: vivid: use vfree() instead of kfree() for dev->bitmap_cap

[Greg Kroah-Hartman]

From: Alexander Potapenko <glider@google.com>

commit dad7e270ba712ba1c99cd2d91018af6044447a06 upstream.

syzkaller reported crashes on kfree() called from
vivid_vid_cap_s_selection(). This looks like a simple typo, as
dev->bitmap_cap is allocated with vzalloc() throughout the file.

Fixes: ef834f7836ec0 ("[media] vivid: add the video capture and output
parts")

Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Syzbot <syzbot+6c0effb5877f6b0344e2@syzkaller.appspotmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/vivid/vivid-vid-cap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/platform/vivid/vivid-vid-cap.c
+++ b/drivers/media/platform/vivid/vivid-vid-cap.c
@@ -992,7 +992,7 @@ int vivid_vid_cap_s_selection(struct fil
 		v4l2_rect_map_inside(&s->r, &dev->fmt_cap_rect);
 		if (dev->bitmap_cap && (compose->width != s->r.width ||
 					compose->height != s->r.height)) {
-			kfree(dev->bitmap_cap);
+			vfree(dev->bitmap_cap);
 			dev->bitmap_cap = NULL;
 		}
 		*compose = s->r;

[PATCH 4.19 038/276] ssb: Fix possible NULL pointer dereference in ssb_host_pcmcia_exit

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit b2c01aab9646ed8ffb7c549afe55d5349c482425 upstream.

Syzkaller report this:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 4492 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:sysfs_remove_file_ns+0x27/0x70 fs/sysfs/file.c:468
Code: 00 00 00 41 54 55 48 89 fd 53 49 89 d4 48 89 f3 e8 ee 76 9c ff 48 8d 7d 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 2d 48 89 da 48 b8 00 00 00 00 00 fc ff df 48 8b 6d
RSP: 0018:ffff8881e9d9fc00 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffffffff900367e0 RCX: ffffffff81a95952
RDX: 0000000000000006 RSI: ffffc90001405000 RDI: 0000000000000030
RBP: 0000000000000000 R08: fffffbfff1fa22ed R09: fffffbfff1fa22ed
R10: 0000000000000001 R11: fffffbfff1fa22ec R12: 0000000000000000
R13: ffffffffc1abdac0 R14: 1ffff1103d3b3f8b R15: 0000000000000000
FS:  00007fe409dc1700(0000) GS:ffff8881f1200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d721000 CR3: 00000001e98b6005 CR4: 00000000007606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 driver_remove_file+0x40/0x50 drivers/base/driver.c:122
 pcmcia_remove_newid_file drivers/pcmcia/ds.c:163 [inline]
 pcmcia_unregister_driver+0x7d/0x2b0 drivers/pcmcia/ds.c:209
 ssb_modexit+0xa/0x1b [ssb]
 __do_sys_delete_module kernel/module.c:1018 [inline]
 __se_sys_delete_module kernel/module.c:961 [inline]
 __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fe409dc0c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe409dc16bc
R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff
Modules linked in: ssb(-) 3c59x nvme_core macvlan tap pata_hpt3x3 rt2x00pci null_blk tsc40 pm_notifier_error_inject notifier_error_inject mdio cdc_wdm nf_reject_ipv4 ath9k_common ath9k_hw ath pppox ppp_generic slhc ehci_platform wl12xx wlcore tps6507x_ts ioc4 nf_synproxy_core ide_gd_mod ax25 can_dev iwlwifi can_raw atm tm2_touchkey can_gw can sundance adp5588_keys rt2800mmio rt2800lib rt2x00mmio rt2x00lib eeprom_93cx6 pn533 lru_cache elants_i2c ip_set nfnetlink gameport tipc hampshire nhc_ipv6 nhc_hop nhc_udp nhc_fragment nhc_routing nhc_mobility nhc_dest 6lowpan silead brcmutil nfc mt76_usb mt76 mac80211 iptable_security iptable_raw iptable_mangle iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_gre sit hsr veth vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon vcan bridge stp llc ip6_gre ip6_tunnel tunnel6 tun joydev mousedev serio_raw ide_pci_generic piix floppy ide_core sch_fq_codel ip_tables x_tables ipv6
 [last unloaded: 3c59x]
Dumping ftrace buffer:
   (ftrace buffer empty)
---[ end trace 3913cbf8011e1c05 ]---

In ssb_modinit, it does not fail SSB init when ssb_host_pcmcia_init failed,
however in ssb_modexit, ssb_host_pcmcia_exit calls pcmcia_unregister_driver
unconditionally, which may tigger a NULL pointer dereference issue as above.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 399500da18f7 ("ssb: pick PCMCIA host code support from b43 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ssb/bridge_pcmcia_80211.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/ssb/bridge_pcmcia_80211.c
+++ b/drivers/ssb/bridge_pcmcia_80211.c
@@ -113,16 +113,21 @@ static struct pcmcia_driver ssb_host_pcm
 	.resume		= ssb_host_pcmcia_resume,
 };
 
+static int pcmcia_init_failed;
+
 /*
  * These are not module init/exit functions!
  * The module_pcmcia_driver() helper cannot be used here.
  */
 int ssb_host_pcmcia_init(void)
 {
-	return pcmcia_register_driver(&ssb_host_pcmcia_driver);
+	pcmcia_init_failed = pcmcia_register_driver(&ssb_host_pcmcia_driver);
+
+	return pcmcia_init_failed;
 }
 
 void ssb_host_pcmcia_exit(void)
 {
-	pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
+	if (!pcmcia_init_failed)
+		pcmcia_unregister_driver(&ssb_host_pcmcia_driver);
 }

[PATCH 4.19 039/276] bpf: devmap: fix use-after-free Read in __dev_map_entry_free

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 2baae3545327632167c0180e9ca1d467416f1919 upstream.

synchronize_rcu() is fine when the rcu callbacks only need
to free memory (kfree_rcu() or direct kfree() call rcu call backs)

__dev_map_entry_free() is a bit more complex, so we need to make
sure that call queued __dev_map_entry_free() callbacks have completed.

sysbot report:

BUG: KASAN: use-after-free in dev_map_flush_old kernel/bpf/devmap.c:365
[inline]
BUG: KASAN: use-after-free in __dev_map_entry_free+0x2a8/0x300
kernel/bpf/devmap.c:379
Read of size 8 at addr ffff8801b8da38c8 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.17.0+ #39
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  dev_map_flush_old kernel/bpf/devmap.c:365 [inline]
  __dev_map_entry_free+0x2a8/0x300 kernel/bpf/devmap.c:379
  __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
  rcu_do_batch kernel/rcu/tree.c:2558 [inline]
  invoke_rcu_callbacks kernel/rcu/tree.c:2818 [inline]
  __rcu_process_callbacks kernel/rcu/tree.c:2785 [inline]
  rcu_process_callbacks+0xe9d/0x1760 kernel/rcu/tree.c:2802
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
  run_ksoftirqd+0x86/0x100 kernel/softirq.c:645
  smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

Allocated by task 6675:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
  kmalloc include/linux/slab.h:513 [inline]
  kzalloc include/linux/slab.h:706 [inline]
  dev_map_alloc+0x208/0x7f0 kernel/bpf/devmap.c:102
  find_and_alloc_map kernel/bpf/syscall.c:129 [inline]
  map_create+0x393/0x1010 kernel/bpf/syscall.c:453
  __do_sys_bpf kernel/bpf/syscall.c:2351 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:2328 [inline]
  __x64_sys_bpf+0x303/0x510 kernel/bpf/syscall.c:2328
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 26:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kfree+0xd9/0x260 mm/slab.c:3813
  dev_map_free+0x4fa/0x670 kernel/bpf/devmap.c:191
  bpf_map_free_deferred+0xba/0xf0 kernel/bpf/syscall.c:262
  process_one_work+0xc64/0x1b70 kernel/workqueue.c:2153
  worker_thread+0x181/0x13a0 kernel/workqueue.c:2296
  kthread+0x345/0x410 kernel/kthread.c:240
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff8801b8da37c0
  which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
  512-byte region [ffff8801b8da37c0, ffff8801b8da39c0)
The buggy address belongs to the page:
page:ffffea0006e368c0 count:1 mapcount:0 mapping:ffff8801da800940
index:0xffff8801b8da3540
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007217b88 ffffea0006e30cc8 ffff8801da800940
raw: ffff8801b8da3540 ffff8801b8da3040 0000000100000004 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
  ffff8801b8da3780: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
  ffff8801b8da3800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff8801b8da3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                               ^
  ffff8801b8da3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8801b8da3980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc

Fixes: 546ac1ffb70d ("bpf: add devmap, a map for storing net device references")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+457d3e2ffbcf31aee5c0@syzkaller.appspotmail.com
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/devmap.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/kernel/bpf/devmap.c
+++ b/kernel/bpf/devmap.c
@@ -164,6 +164,9 @@ static void dev_map_free(struct bpf_map
 	bpf_clear_redirect_map(map);
 	synchronize_rcu();
 
+	/* Make sure prior __dev_map_entry_free() have completed. */
+	rcu_barrier();
+
 	/* To ensure all pending flush operations have completed wait for flush
 	 * bitmap to indicate all flush_needed bits to be zero on _all_ cpus.
 	 * Because the above synchronize_rcu() ensures the map is disconnected

[PATCH 4.19 040/276] batman-adv: mcast: fix multicast tt/tvlv worker locking

[Greg Kroah-Hartman]

From: Linus Lüssing <linus.luessing@c0d3.blue>

commit a3c7cd0cdf1107f891aff847ad481e34df727055 upstream.

Syzbot has reported some issues with the locking assumptions made for
the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in
batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add().
While hard/not reproduceable for us so far it seems that the
delayed_work_pending() we use might not be quite safe from reordering.

Therefore this patch adds an explicit, new spinlock to protect the
update of the mla_list and flags in bat_priv and then removes the
WARN_ON(delayed_work_pending()).

Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com
Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com
Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com
Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com
Fixes: cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/batman-adv/main.c      |    1 +
 net/batman-adv/multicast.c |   11 +++--------
 net/batman-adv/types.h     |    5 +++++
 3 files changed, 9 insertions(+), 8 deletions(-)

--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -160,6 +160,7 @@ int batadv_mesh_init(struct net_device *
 	spin_lock_init(&bat_priv->tt.commit_lock);
 	spin_lock_init(&bat_priv->gw.list_lock);
 #ifdef CONFIG_BATMAN_ADV_MCAST
+	spin_lock_init(&bat_priv->mcast.mla_lock);
 	spin_lock_init(&bat_priv->mcast.want_lists_lock);
 #endif
 	spin_lock_init(&bat_priv->tvlv.container_list_lock);
--- a/net/batman-adv/multicast.c
+++ b/net/batman-adv/multicast.c
@@ -325,8 +325,6 @@ static void batadv_mcast_mla_list_free(s
  * translation table except the ones listed in the given mcast_list.
  *
  * If mcast_list is NULL then all are retracted.
- *
- * Do not call outside of the mcast worker! (or cancel mcast worker first)
  */
 static void batadv_mcast_mla_tt_retract(struct batadv_priv *bat_priv,
 					struct hlist_head *mcast_list)
@@ -334,8 +332,6 @@ static void batadv_mcast_mla_tt_retract(
 	struct batadv_hw_addr *mcast_entry;
 	struct hlist_node *tmp;
 
-	WARN_ON(delayed_work_pending(&bat_priv->mcast.work));
-
 	hlist_for_each_entry_safe(mcast_entry, tmp, &bat_priv->mcast.mla_list,
 				  list) {
 		if (mcast_list &&
@@ -359,8 +355,6 @@ static void batadv_mcast_mla_tt_retract(
  *
  * Adds multicast listener announcements from the given mcast_list to the
  * translation table if they have not been added yet.
- *
- * Do not call outside of the mcast worker! (or cancel mcast worker first)
  */
 static void batadv_mcast_mla_tt_add(struct batadv_priv *bat_priv,
 				    struct hlist_head *mcast_list)
@@ -368,8 +362,6 @@ static void batadv_mcast_mla_tt_add(stru
 	struct batadv_hw_addr *mcast_entry;
 	struct hlist_node *tmp;
 
-	WARN_ON(delayed_work_pending(&bat_priv->mcast.work));
-
 	if (!mcast_list)
 		return;
 
@@ -658,7 +650,10 @@ static void batadv_mcast_mla_update(stru
 	priv_mcast = container_of(delayed_work, struct batadv_priv_mcast, work);
 	bat_priv = container_of(priv_mcast, struct batadv_priv, mcast);
 
+	spin_lock(&bat_priv->mcast.mla_lock);
 	__batadv_mcast_mla_update(bat_priv);
+	spin_unlock(&bat_priv->mcast.mla_lock);
+
 	batadv_mcast_start_timer(bat_priv);
 }
 
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -1216,6 +1216,11 @@ struct batadv_priv_mcast {
 	unsigned char bridged:1;
 
 	/**
+	 * @mla_lock: a lock protecting mla_list and mla_flags
+	 */
+	spinlock_t mla_lock;
+
+	/**
 	 * @num_want_all_unsnoopables: number of nodes wanting unsnoopable IP
 	 *  traffic
 	 */

[PATCH 4.19 041/276] at76c50x-usb: Dont register led_trigger if usb_register_driver failed

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

commit 09ac2694b0475f96be895848687ebcbba97eeecf upstream.

Syzkaller report this:

[ 1213.468581] BUG: unable to handle kernel paging request at fffffbfff83bf338
[ 1213.469530] #PF error: [normal kernel read fault]
[ 1213.469530] PGD 237fe4067 P4D 237fe4067 PUD 237e60067 PMD 1c868b067 PTE 0
[ 1213.473514] Oops: 0000 [#1] SMP KASAN PTI
[ 1213.473514] CPU: 0 PID: 6321 Comm: syz-executor.0 Tainted: G         C        5.1.0-rc3+ #8
[ 1213.473514] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1213.473514] RIP: 0010:strcmp+0x31/0xa0
[ 1213.473514] Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
[ 1213.473514] RSP: 0018:ffff8881f2b7f950 EFLAGS: 00010246
[ 1213.473514] RAX: 1ffffffff83bf338 RBX: ffff8881ea6f7240 RCX: ffffffff825350c6
[ 1213.473514] RDX: 0000000000000000 RSI: ffffffffc1ee19c0 RDI: ffffffffc1df99c0
[ 1213.473514] RBP: ffffffffc1df99c1 R08: 0000000000000001 R09: 0000000000000004
[ 1213.473514] R10: 0000000000000000 R11: ffff8881de353f00 R12: ffff8881ee727900
[ 1213.473514] R13: dffffc0000000000 R14: 0000000000000001 R15: ffffffffc1eeaaf0
[ 1213.473514] FS:  00007fa66fa01700(0000) GS:ffff8881f7200000(0000) knlGS:0000000000000000
[ 1213.473514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1213.473514] CR2: fffffbfff83bf338 CR3: 00000001ebb9e005 CR4: 00000000007606f0
[ 1213.473514] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1213.473514] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1213.473514] PKRU: 55555554
[ 1213.473514] Call Trace:
[ 1213.473514]  led_trigger_register+0x112/0x3f0
[ 1213.473514]  led_trigger_register_simple+0x7a/0x110
[ 1213.473514]  ? 0xffffffffc1c10000
[ 1213.473514]  at76_mod_init+0x77/0x1000 [at76c50x_usb]
[ 1213.473514]  do_one_initcall+0xbc/0x47d
[ 1213.473514]  ? perf_trace_initcall_level+0x3a0/0x3a0
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  ? kasan_unpoison_shadow+0x30/0x40
[ 1213.473514]  do_init_module+0x1b5/0x547
[ 1213.473514]  load_module+0x6405/0x8c10
[ 1213.473514]  ? module_frob_arch_sections+0x20/0x20
[ 1213.473514]  ? kernel_read_file+0x1e6/0x5d0
[ 1213.473514]  ? find_held_lock+0x32/0x1c0
[ 1213.473514]  ? cap_capable+0x1ae/0x210
[ 1213.473514]  ? __do_sys_finit_module+0x162/0x190
[ 1213.473514]  __do_sys_finit_module+0x162/0x190
[ 1213.473514]  ? __ia32_sys_init_module+0xa0/0xa0
[ 1213.473514]  ? __mutex_unlock_slowpath+0xdc/0x690
[ 1213.473514]  ? wait_for_completion+0x370/0x370
[ 1213.473514]  ? vfs_write+0x204/0x4a0
[ 1213.473514]  ? do_syscall_64+0x18/0x450
[ 1213.473514]  do_syscall_64+0x9f/0x450
[ 1213.473514]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1213.473514] RIP: 0033:0x462e99
[ 1213.473514] Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
[ 1213.473514] RSP: 002b:00007fa66fa00c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1213.473514] RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
[ 1213.473514] RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
[ 1213.473514] RBP: 00007fa66fa00c70 R08: 0000000000000000 R09: 0000000000000000
[ 1213.473514] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fa66fa016bc
[ 1213.473514] R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

If usb_register failed, no need to call led_trigger_register_simple.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1264b951463a ("at76c50x-usb: add driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/atmel/at76c50x-usb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/atmel/at76c50x-usb.c
+++ b/drivers/net/wireless/atmel/at76c50x-usb.c
@@ -2585,8 +2585,8 @@ static int __init at76_mod_init(void)
 	if (result < 0)
 		printk(KERN_ERR DRIVER_NAME
 		       ": usb_register failed (status %d)\n", result);
-
-	led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
+	else
+		led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
 	return result;
 }
 

[PATCH 4.19 042/276] acct_on(): dont mess with freeze protection

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit 9419a3191dcb27f24478d288abaab697228d28e6 upstream.

What happens there is that we are replacing file->path.mnt of
a file we'd just opened with a clone and we need the write
count contribution to be transferred from original mount to
new one.  That's it.  We do *NOT* want any kind of freeze
protection for the duration of switchover.

IOW, we should just use __mnt_{want,drop}_write() for that
switchover; no need to bother with mnt_{want,drop}_write()
there.

Tested-by: Amir Goldstein <amir73il@gmail.com>
Reported-by: syzbot+2a73a6ea9507b7112141@syzkaller.appspotmail.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/internal.h         |    2 --
 include/linux/mount.h |    2 ++
 kernel/acct.c         |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/fs/internal.h
+++ b/fs/internal.h
@@ -80,9 +80,7 @@ extern int sb_prepare_remount_readonly(s
 
 extern void __init mnt_init(void);
 
-extern int __mnt_want_write(struct vfsmount *);
 extern int __mnt_want_write_file(struct file *);
-extern void __mnt_drop_write(struct vfsmount *);
 extern void __mnt_drop_write_file(struct file *);
 
 /*
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -86,6 +86,8 @@ extern bool mnt_may_suid(struct vfsmount
 
 struct path;
 extern struct vfsmount *clone_private_mount(const struct path *path);
+extern int __mnt_want_write(struct vfsmount *);
+extern void __mnt_drop_write(struct vfsmount *);
 
 struct file_system_type;
 extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -227,7 +227,7 @@ static int acct_on(struct filename *path
 		filp_close(file, NULL);
 		return PTR_ERR(internal);
 	}
-	err = mnt_want_write(internal);
+	err = __mnt_want_write(internal);
 	if (err) {
 		mntput(internal);
 		kfree(acct);
@@ -252,7 +252,7 @@ static int acct_on(struct filename *path
 	old = xchg(&ns->bacct, &acct->pin);
 	mutex_unlock(&acct->lock);
 	pin_kill(old);
-	mnt_drop_write(mnt);
+	__mnt_drop_write(mnt);
 	mntput(mnt);
 	return 0;
 }

[PATCH 4.19 043/276] Revert "btrfs: Honour FITRIM range constraints during free space trim"

[Greg Kroah-Hartman]

From: David Sterba <dsterba@suse.com>

This reverts commit 8b13bb911f0c0c77d41e5ddc41ad3c127c356b8a.

There is currently no corresponding patch in master due to additional
changes that would be significantly different from plain revert in the
respective stable branch.

The range argument was not handled correctly and could cause trim to
overlap allocated areas or reach beyond the end of the device. The
address space that fitrim normally operates on is in logical
coordinates, while the discards are done on the physical device extents.
This distinction cannot be made with the current ioctl interface and
caused the confusion.

The bug depends on the layout of block groups and does not always
happen. The whole-fs trim (run by default by the fstrim tool) is not
affected.

Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/extent-tree.c |   25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)

--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -10788,9 +10788,9 @@ int btrfs_error_unpin_extent_range(struc
  * held back allocations.
  */
 static int btrfs_trim_free_extents(struct btrfs_device *device,
-				   struct fstrim_range *range, u64 *trimmed)
+				   u64 minlen, u64 *trimmed)
 {
-	u64 start = range->start, len = 0;
+	u64 start = 0, len = 0;
 	int ret;
 
 	*trimmed = 0;
@@ -10833,8 +10833,8 @@ static int btrfs_trim_free_extents(struc
 		if (!trans)
 			up_read(&fs_info->commit_root_sem);
 
-		ret = find_free_dev_extent_start(trans, device, range->minlen,
-						 start, &start, &len);
+		ret = find_free_dev_extent_start(trans, device, minlen, start,
+						 &start, &len);
 		if (trans) {
 			up_read(&fs_info->commit_root_sem);
 			btrfs_put_transaction(trans);
@@ -10847,16 +10847,6 @@ static int btrfs_trim_free_extents(struc
 			break;
 		}
 
-		/* If we are out of the passed range break */
-		if (start > range->start + range->len - 1) {
-			mutex_unlock(&fs_info->chunk_mutex);
-			ret = 0;
-			break;
-		}
-
-		start = max(range->start, start);
-		len = min(range->len, len);
-
 		ret = btrfs_issue_discard(device->bdev, start, len, &bytes);
 		mutex_unlock(&fs_info->chunk_mutex);
 
@@ -10866,10 +10856,6 @@ static int btrfs_trim_free_extents(struc
 		start += len;
 		*trimmed += bytes;
 
-		/* We've trimmed enough */
-		if (*trimmed >= range->len)
-			break;
-
 		if (fatal_signal_pending(current)) {
 			ret = -ERESTARTSYS;
 			break;
@@ -10953,7 +10939,8 @@ int btrfs_trim_fs(struct btrfs_fs_info *
 	mutex_lock(&fs_info->fs_devices->device_list_mutex);
 	devices = &fs_info->fs_devices->devices;
 	list_for_each_entry(device, devices, dev_list) {
-		ret = btrfs_trim_free_extents(device, range, &group_trimmed);
+		ret = btrfs_trim_free_extents(device, range->minlen,
+					      &group_trimmed);
 		if (ret) {
 			dev_failed++;
 			dev_ret = ret;

[PATCH 4.19 044/276] gfs2: Fix lru_count going negative

[Greg Kroah-Hartman]

[ Upstream commit 7881ef3f33bb80f459ea6020d1e021fc524a6348 ]

Under certain conditions, lru_count may drop below zero resulting in
a large amount of log spam like this:

vmscan: shrink_slab: gfs2_dump_glock+0x3b0/0x630 [gfs2] \
    negative objects to delete nr=-1

This happens as follows:
1) A glock is moved from lru_list to the dispose list and lru_count is
   decremented.
2) The dispose function calls cond_resched() and drops the lru lock.
3) Another thread takes the lru lock and tries to add the same glock to
   lru_list, checking if the glock is on an lru list.
4) It is on a list (actually the dispose list) and so it avoids
   incrementing lru_count.
5) The glock is moved to lru_list.
5) The original thread doesn't dispose it because it has been re-added
   to the lru list but the lru_count has still decreased by one.

Fix by checking if the LRU flag is set on the glock rather than checking
if the glock is on some list and rearrange the code so that the LRU flag
is added/removed precisely when the glock is added/removed from lru_list.

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 9d566e62684c2..775256141e9fb 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -183,15 +183,19 @@ static int demote_ok(const struct gfs2_glock *gl)
 
 void gfs2_glock_add_to_lru(struct gfs2_glock *gl)
 {
+	if (!(gl->gl_ops->go_flags & GLOF_LRU))
+		return;
+
 	spin_lock(&lru_lock);
 
-	if (!list_empty(&gl->gl_lru))
-		list_del_init(&gl->gl_lru);
-	else
+	list_del(&gl->gl_lru);
+	list_add_tail(&gl->gl_lru, &lru_list);
+
+	if (!test_bit(GLF_LRU, &gl->gl_flags)) {
+		set_bit(GLF_LRU, &gl->gl_flags);
 		atomic_inc(&lru_count);
+	}
 
-	list_add_tail(&gl->gl_lru, &lru_list);
-	set_bit(GLF_LRU, &gl->gl_flags);
 	spin_unlock(&lru_lock);
 }
 
@@ -201,7 +205,7 @@ static void gfs2_glock_remove_from_lru(struct gfs2_glock *gl)
 		return;
 
 	spin_lock(&lru_lock);
-	if (!list_empty(&gl->gl_lru)) {
+	if (test_bit(GLF_LRU, &gl->gl_flags)) {
 		list_del_init(&gl->gl_lru);
 		atomic_dec(&lru_count);
 		clear_bit(GLF_LRU, &gl->gl_flags);
@@ -1158,8 +1162,7 @@ void gfs2_glock_dq(struct gfs2_holder *gh)
 		    !test_bit(GLF_DEMOTE, &gl->gl_flags))
 			fast_path = 1;
 	}
-	if (!test_bit(GLF_LFLUSH, &gl->gl_flags) && demote_ok(gl) &&
-	    (glops->go_flags & GLOF_LRU))
+	if (!test_bit(GLF_LFLUSH, &gl->gl_flags) && demote_ok(gl))
 		gfs2_glock_add_to_lru(gl);
 
 	trace_gfs2_glock_queue(gh, 0);
@@ -1455,6 +1458,7 @@ __acquires(&lru_lock)
 		if (!spin_trylock(&gl->gl_lockref.lock)) {
 add_back_to_lru:
 			list_add(&gl->gl_lru, &lru_list);
+			set_bit(GLF_LRU, &gl->gl_flags);
 			atomic_inc(&lru_count);
 			continue;
 		}
@@ -1462,7 +1466,6 @@ __acquires(&lru_lock)
 			spin_unlock(&gl->gl_lockref.lock);
 			goto add_back_to_lru;
 		}
-		clear_bit(GLF_LRU, &gl->gl_flags);
 		gl->gl_lockref.count++;
 		if (demote_ok(gl))
 			handle_callback(gl, LM_ST_UNLOCKED, 0, false);
@@ -1497,6 +1500,7 @@ static long gfs2_scan_glock_lru(int nr)
 		if (!test_bit(GLF_LOCK, &gl->gl_flags)) {
 			list_move(&gl->gl_lru, &dispose);
 			atomic_dec(&lru_count);
+			clear_bit(GLF_LRU, &gl->gl_flags);
 			freed++;
 			continue;
 		}
-- 
2.20.1

[PATCH 4.19 045/276] cxgb4: Fix error path in cxgb4_init_module

[Greg Kroah-Hartman]

[ Upstream commit a3147770bea76c8dbad73eca3a24c2118da5e719 ]

BUG: unable to handle kernel paging request at ffffffffa016a270
PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bbd067 PTE 0
Oops: 0000 [#1
CPU: 0 PID: 6134 Comm: modprobe Not tainted 5.1.0+ #33
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:atomic_notifier_chain_register+0x24/0x60
Code: 1f 80 00 00 00 00 55 48 89 e5 41 54 49 89 f4 53 48 89 fb e8 ae b4 38 01 48 8b 53 38 48 8d 4b 38 48 85 d2 74 20 45 8b 44 24 10 <44> 3b 42 10 7e 08 eb 13 44 39 42 10 7c 0d 48 8d 4a 08 48 8b 52 08
RSP: 0018:ffffc90000e2bc60 EFLAGS: 00010086
RAX: 0000000000000292 RBX: ffffffff83467240 RCX: ffffffff83467278
RDX: ffffffffa016a260 RSI: ffffffff83752140 RDI: ffffffff83467240
RBP: ffffc90000e2bc70 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000014fa61f R12: ffffffffa01c8260
R13: ffff888231091e00 R14: 0000000000000000 R15: ffffc90000e2be78
FS:  00007fbd8d7cd540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa016a270 CR3: 000000022c7e3000 CR4: 00000000000006f0
Call Trace:
 register_inet6addr_notifier+0x13/0x20
 cxgb4_init_module+0x6c/0x1000 [cxgb4
 ? 0xffffffffa01d7000
 do_one_initcall+0x6c/0x3cc
 ? do_init_module+0x22/0x1f1
 ? rcu_read_lock_sched_held+0x97/0xb0
 ? kmem_cache_alloc_trace+0x325/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If pci_register_driver fails, register inet6addr_notifier is
pointless. This patch fix the error path in cxgb4_init_module.

Fixes: b5a02f503caa ("cxgb4 : Update ipv6 address handling api")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 961e3087d1d38..bb04c695ab9fd 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -6010,15 +6010,24 @@ static int __init cxgb4_init_module(void)
 
 	ret = pci_register_driver(&cxgb4_driver);
 	if (ret < 0)
-		debugfs_remove(cxgb4_debugfs_root);
+		goto err_pci;
 
 #if IS_ENABLED(CONFIG_IPV6)
 	if (!inet6addr_registered) {
-		register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
-		inet6addr_registered = true;
+		ret = register_inet6addr_notifier(&cxgb4_inet6addr_notifier);
+		if (ret)
+			pci_unregister_driver(&cxgb4_driver);
+		else
+			inet6addr_registered = true;
 	}
 #endif
 
+	if (ret == 0)
+		return ret;
+
+err_pci:
+	debugfs_remove(cxgb4_debugfs_root);
+
 	return ret;
 }
 
-- 
2.20.1

[PATCH 4.19 046/276] NFS: make nfs_match_client killable

[Greg Kroah-Hartman]

[ Upstream commit 950a578c6128c2886e295b9c7ecb0b6b22fcc92b ]

    Actually we don't do anything with return value from
    nfs_wait_client_init_complete in nfs_match_client, as a
    consequence if we get a fatal signal and client is not
    fully initialised, we'll loop to "again" label

    This has been proven to cause soft lockups on some scenarios
    (no-carrier but configured network interfaces)

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/client.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 751ca65da8a35..846d45cb1a3c8 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -290,6 +290,7 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat
 	struct nfs_client *clp;
 	const struct sockaddr *sap = data->addr;
 	struct nfs_net *nn = net_generic(data->net, nfs_net_id);
+	int error;
 
 again:
 	list_for_each_entry(clp, &nn->nfs_client_list, cl_share_link) {
@@ -302,8 +303,10 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat
 		if (clp->cl_cons_state > NFS_CS_READY) {
 			refcount_inc(&clp->cl_count);
 			spin_unlock(&nn->nfs_client_lock);
-			nfs_wait_client_init_complete(clp);
+			error = nfs_wait_client_init_complete(clp);
 			nfs_put_client(clp);
+			if (error < 0)
+				return ERR_PTR(error);
 			spin_lock(&nn->nfs_client_lock);
 			goto again;
 		}
@@ -413,6 +416,8 @@ struct nfs_client *nfs_get_client(const struct nfs_client_initdata *cl_init)
 		clp = nfs_match_client(cl_init);
 		if (clp) {
 			spin_unlock(&nn->nfs_client_lock);
+			if (IS_ERR(clp))
+				return clp;
 			if (new)
 				new->rpc_ops->free_client(new);
 			return nfs_found_client(cl_init, clp);
-- 
2.20.1

[PATCH 4.19 047/276] IB/hfi1: Fix WQ_MEM_RECLAIM warning

[Greg Kroah-Hartman]

[ Upstream commit 4c4b1996b5db688e2dcb8242b0a3bf7b1e845e42 ]

The work_item cancels that occur when a QP is destroyed can elicit the
following trace:

 workqueue: WQ_MEM_RECLAIM ipoib_wq:ipoib_cm_tx_reap [ib_ipoib] is flushing !WQ_MEM_RECLAIM hfi0_0:_hfi1_do_send [hfi1]
 WARNING: CPU: 7 PID: 1403 at kernel/workqueue.c:2486 check_flush_dependency+0xb1/0x100
 Call Trace:
  __flush_work.isra.29+0x8c/0x1a0
  ? __switch_to_asm+0x40/0x70
  __cancel_work_timer+0x103/0x190
  ? schedule+0x32/0x80
  iowait_cancel_work+0x15/0x30 [hfi1]
  rvt_reset_qp+0x1f8/0x3e0 [rdmavt]
  rvt_destroy_qp+0x65/0x1f0 [rdmavt]
  ? _cond_resched+0x15/0x30
  ib_destroy_qp+0xe9/0x230 [ib_core]
  ipoib_cm_tx_reap+0x21c/0x560 [ib_ipoib]
  process_one_work+0x171/0x370
  worker_thread+0x49/0x3f0
  kthread+0xf8/0x130
  ? max_active_store+0x80/0x80
  ? kthread_bind+0x10/0x10
  ret_from_fork+0x35/0x40

Since QP destruction frees memory, hfi1_wq should have the WQ_MEM_RECLAIM.

The hfi1_wq does not allocate memory with GFP_KERNEL or otherwise become
entangled with memory reclaim, so this flag is appropriate.

Fixes: 0a226edd203f ("staging/rdma/hfi1: Use parallel workqueue for SDMA engines")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index da786eb18558d..368f4f08b6866 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -798,7 +798,8 @@ static int create_workqueues(struct hfi1_devdata *dd)
 			ppd->hfi1_wq =
 				alloc_workqueue(
 				    "hfi%d_%d",
-				    WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE,
+				    WQ_SYSFS | WQ_HIGHPRI | WQ_CPU_INTENSIVE |
+				    WQ_MEM_RECLAIM,
 				    HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES,
 				    dd->unit, pidx);
 			if (!ppd->hfi1_wq)
-- 
2.20.1

[PATCH 4.19 048/276] gfs2: Fix occasional glock use-after-free

[Greg Kroah-Hartman]

[ Upstream commit 9287c6452d2b1f24ea8e84bd3cf6f3c6f267f712 ]

This patch has to do with the life cycle of glocks and buffers.  When
gfs2 metadata or journaled data is queued to be written, a gfs2_bufdata
object is assigned to track the buffer, and that is queued to various
lists, including the glock's gl_ail_list to indicate it's on the active
items list.  Once the page associated with the buffer has been written,
it is removed from the ail list, but its life isn't over until a revoke
has been successfully written.

So after the block is written, its bufdata object is moved from the
glock's gl_ail_list to a file-system-wide list of pending revokes,
sd_log_le_revoke.  At that point the glock still needs to track how many
revokes it contributed to that list (in gl_revokes) so that things like
glock go_sync can ensure all the metadata has been not only written, but
also revoked before the glock is granted to a different node.  This is
to guarantee journal replay doesn't replay the block once the glock has
been granted to another node.

Ross Lagerwall recently discovered a race in which an inode could be
evicted, and its glock freed after its ail list had been synced, but
while it still had unwritten revokes on the sd_log_le_revoke list.  The
evict decremented the glock reference count to zero, which allowed the
glock to be freed.  After the revoke was written, function
revoke_lo_after_commit tried to adjust the glock's gl_revokes counter
and clear its GLF_LFLUSH flag, at which time it referenced the freed
glock.

This patch fixes the problem by incrementing the glock reference count
in gfs2_add_revoke when the glock's first bufdata object is moved from
the glock to the global revokes list. Later, when the glock's last such
bufdata object is freed, the reference count is decremented. This
guarantees that whichever process finishes last (the revoke writing or
the evict) will properly free the glock, and neither will reference the
glock after it has been freed.

Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/glock.c | 1 +
 fs/gfs2/log.c   | 3 ++-
 fs/gfs2/lops.c  | 6 ++++--
 3 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 775256141e9fb..ccdd8c821abd7 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -140,6 +140,7 @@ void gfs2_glock_free(struct gfs2_glock *gl)
 {
 	struct gfs2_sbd *sdp = gl->gl_name.ln_sbd;
 
+	BUG_ON(atomic_read(&gl->gl_revokes));
 	rhashtable_remove_fast(&gl_hash_table, &gl->gl_node, ht_parms);
 	smp_mb();
 	wake_up_glock(gl);
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index ee20ea42e7b59..cd85092723dea 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -604,7 +604,8 @@ void gfs2_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd)
 	bd->bd_bh = NULL;
 	bd->bd_ops = &gfs2_revoke_lops;
 	sdp->sd_log_num_revoke++;
-	atomic_inc(&gl->gl_revokes);
+	if (atomic_inc_return(&gl->gl_revokes) == 1)
+		gfs2_glock_hold(gl);
 	set_bit(GLF_LFLUSH, &gl->gl_flags);
 	list_add(&bd->bd_list, &sdp->sd_log_le_revoke);
 }
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index f2567f958d002..8f99b395d7bf6 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -662,8 +662,10 @@ static void revoke_lo_after_commit(struct gfs2_sbd *sdp, struct gfs2_trans *tr)
 		bd = list_entry(head->next, struct gfs2_bufdata, bd_list);
 		list_del_init(&bd->bd_list);
 		gl = bd->bd_gl;
-		atomic_dec(&gl->gl_revokes);
-		clear_bit(GLF_LFLUSH, &gl->gl_flags);
+		if (atomic_dec_return(&gl->gl_revokes) == 0) {
+			clear_bit(GLF_LFLUSH, &gl->gl_flags);
+			gfs2_glock_queue_put(gl);
+		}
 		kmem_cache_free(gfs2_bufdata_cachep, bd);
 	}
 }
-- 
2.20.1

[PATCH 4.19 049/276] mmc: core: Verify SD bus width

[Greg Kroah-Hartman]

[ Upstream commit 9e4be8d03f50d1b25c38e2b59e73b194c130df7d ]

The SD Physical Layer Spec says the following: Since the SD Memory Card
shall support at least the two bus modes 1-bit or 4-bit width, then any SD
Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101").

This change verifies the card has specified a bus width.

AMD SDHC Device 7806 can get into a bad state after a card disconnect
where anything transferred via the DATA lines will always result in a
zero filled buffer. Currently the driver will continue without error if
the HC is in this condition. A block device will be created, but reading
from it will result in a zero buffer. This makes it seem like the SD
device has been erased, when in actuality the data is never getting
copied from the DATA lines to the data buffer.

SCR is the first command in the SD initialization sequence that uses the
DATA lines. By checking that the response was invalid, we can abort
mounting the card.

Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sd.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index d0d9f90e7cdfb..cfb8ee24eaba1 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -216,6 +216,14 @@ static int mmc_decode_scr(struct mmc_card *card)
 
 	if (scr->sda_spec3)
 		scr->cmds = UNSTUFF_BITS(resp, 32, 2);
+
+	/* SD Spec says: any SD Card shall set at least bits 0 and 2 */
+	if (!(scr->bus_widths & SD_SCR_BUS_WIDTH_1) ||
+	    !(scr->bus_widths & SD_SCR_BUS_WIDTH_4)) {
+		pr_err("%s: invalid bus width\n", mmc_hostname(card->host));
+		return -EINVAL;
+	}
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.19 050/276] tools/bpf: fix perf build error with uClibc (seen on ARC)

[Greg Kroah-Hartman]

[ Upstream commit ca31ca8247e2d3807ff5fa1d1760616a2292001c ]

When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 7a0014794bff7..dd0b68d1f4be0 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -53,6 +53,8 @@
 #  define __NR_bpf 349
 # elif defined(__s390__)
 #  define __NR_bpf 351
+# elif defined(__arc__)
+#  define __NR_bpf 280
 # else
 #  error __NR_bpf not defined. libbpf does not support your arch.
 # endif
-- 
2.20.1

[PATCH 4.19 051/276] selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c

[Greg Kroah-Hartman]

[ Upstream commit 6cea33701eb024bc6c920ab83940ee22afd29139 ]

Test test_libbpf.sh failed on my development server with failure
  -bash-4.4$ sudo ./test_libbpf.sh
  [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
      Couldn't load basic 'r0 = 0' BPF program.
  test_libbpf: failed at file test_l4lb.o
  selftests: test_libbpf [FAILED]
  -bash-4.4$

The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_libbpf_open.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/bpf/test_libbpf_open.c b/tools/testing/selftests/bpf/test_libbpf_open.c
index 8fcd1c076add0..cbd55f5f8d598 100644
--- a/tools/testing/selftests/bpf/test_libbpf_open.c
+++ b/tools/testing/selftests/bpf/test_libbpf_open.c
@@ -11,6 +11,8 @@ static const char *__doc__ =
 #include <bpf/libbpf.h>
 #include <getopt.h>
 
+#include "bpf_rlimit.h"
+
 static const struct option long_options[] = {
 	{"help",	no_argument,		NULL, 'h' },
 	{"debug",	no_argument,		NULL, 'D' },
-- 
2.20.1

[PATCH 4.19 052/276] bpftool: exclude bash-completion/bpftool from .gitignore pattern

[Greg Kroah-Hartman]

[ Upstream commit a7d006714724de4334c5e3548701b33f7b12ca96 ]

tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

  tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

  tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/.gitignore | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/bpftool/.gitignore b/tools/bpf/bpftool/.gitignore
index 67167e44b7266..8248b8dd89d4b 100644
--- a/tools/bpf/bpftool/.gitignore
+++ b/tools/bpf/bpftool/.gitignore
@@ -1,5 +1,5 @@
 *.d
-bpftool
+/bpftool
 bpftool*.8
 bpf-helpers.*
 FEATURE-DUMP.bpftool
-- 
2.20.1

[PATCH 4.19 053/276] dmaengine: tegra210-dma: free dma controller in remove()

[Greg Kroah-Hartman]

[ Upstream commit f030e419501cb95e961e9ed35c493b5d46a04eca ]

Following kernel panic is seen during DMA driver unload->load sequence
==========================================================================
Unable to handle kernel paging request at virtual address ffffff8001198880
Internal error: Oops: 86000007 [#1] PREEMPT SMP
CPU: 0 PID: 5907 Comm: HwBinder:4123_1 Tainted: G C 4.9.128-tegra-g065839f
Hardware name: galen (DT)
task: ffffffc3590d1a80 task.stack: ffffffc3d0678000
PC is at 0xffffff8001198880
LR is at of_dma_request_slave_channel+0xd8/0x1f8
pc : [<ffffff8001198880>] lr : [<ffffff8008746f30>] pstate: 60400045
sp : ffffffc3d067b710
x29: ffffffc3d067b710 x28: 000000000000002f
x27: ffffff800949e000 x26: ffffff800949e750
x25: ffffff800949e000 x24: ffffffbefe817d84
x23: ffffff8009f77cb0 x22: 0000000000000028
x21: ffffffc3ffda49c8 x20: 0000000000000029
x19: 0000000000000001 x18: ffffffffffffffff
x17: 0000000000000000 x16: ffffff80082b66a0
x15: ffffff8009e78250 x14: 000000000000000a
x13: 0000000000000038 x12: 0101010101010101
x11: 0000000000000030 x10: 0101010101010101
x9 : fffffffffffffffc x8 : 7f7f7f7f7f7f7f7f
x7 : 62ff726b6b64622c x6 : 0000000000008064
x5 : 6400000000000000 x4 : ffffffbefe817c44
x3 : ffffffc3ffda3e08 x2 : ffffff8001198880
x1 : ffffffc3d48323c0 x0 : ffffffc3d067b788

Process HwBinder:4123_1 (pid: 5907, stack limit = 0xffffffc3d0678028)
Call trace:
[<ffffff8001198880>] 0xffffff8001198880
[<ffffff80087459f8>] dma_request_chan+0x50/0x1f0
[<ffffff8008745bc0>] dma_request_slave_channel+0x28/0x40
[<ffffff8001552c44>] tegra_alt_pcm_open+0x114/0x170
[<ffffff8008d65fa4>] soc_pcm_open+0x10c/0x878
[<ffffff8008d18618>] snd_pcm_open_substream+0xc0/0x170
[<ffffff8008d1878c>] snd_pcm_open+0xc4/0x240
[<ffffff8008d189e0>] snd_pcm_playback_open+0x58/0x80
[<ffffff8008cfc6d4>] snd_open+0xb4/0x178
[<ffffff8008250628>] chrdev_open+0xb8/0x1d0
[<ffffff8008246fdc>] do_dentry_open+0x214/0x318
[<ffffff80082485d0>] vfs_open+0x58/0x88
[<ffffff800825bce0>] do_last+0x450/0xde0
[<ffffff800825c718>] path_openat+0xa8/0x368
[<ffffff800825dd84>] do_filp_open+0x8c/0x110
[<ffffff8008248a74>] do_sys_open+0x164/0x220
[<ffffff80082b66dc>] compat_SyS_openat+0x3c/0x50
[<ffffff8008083040>] el0_svc_naked+0x34/0x38
---[ end trace 67e6d544e65b5145 ]---
Kernel panic - not syncing: Fatal exception
==========================================================================

In device probe(), of_dma_controller_register() registers DMA controller.
But when driver is removed, this is not freed. During driver reload this
results in data abort and kernel panic. Add of_dma_controller_free() in
driver remove path to fix the issue.

Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/tegra210-adma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index b26256f23d67f..08b10274284a8 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -786,6 +786,7 @@ static int tegra_adma_remove(struct platform_device *pdev)
 	struct tegra_adma *tdma = platform_get_drvdata(pdev);
 	int i;
 
+	of_dma_controller_free(pdev->dev.of_node);
 	dma_async_device_unregister(&tdma->dma_dev);
 
 	for (i = 0; i < tdma->nr_channels; ++i)
-- 
2.20.1

[PATCH 4.19 054/276] net: ena: gcc 8: fix compilation warning

[Greg Kroah-Hartman]

[ Upstream commit f913308879bc6ae437ce64d878c7b05643ddea44 ]

GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c
index 1b5f591cf0a23..b5d72815776cb 100644
--- a/drivers/net/ethernet/amazon/ena/ena_netdev.c
+++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c
@@ -2223,7 +2223,7 @@ static void ena_config_host_info(struct ena_com_dev *ena_dev)
 
 	host_info->os_type = ENA_ADMIN_OS_LINUX;
 	host_info->kernel_ver = LINUX_VERSION_CODE;
-	strncpy(host_info->kernel_ver_str, utsname()->version,
+	strlcpy(host_info->kernel_ver_str, utsname()->version,
 		sizeof(host_info->kernel_ver_str) - 1);
 	host_info->os_dist = 0;
 	strncpy(host_info->os_dist_str, utsname()->release,
-- 
2.20.1

[PATCH 4.19 055/276] hv_netvsc: fix race that may miss tx queue wakeup

[Greg Kroah-Hartman]

[ Upstream commit 93aa4792c3908eac87ddd368ee0fe0564148232b ]

When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.

This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.

Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/netvsc.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index fb12b63439c67..35413041dcf81 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -872,12 +872,6 @@ static inline int netvsc_send_pkt(
 	} else if (ret == -EAGAIN) {
 		netif_tx_stop_queue(txq);
 		ndev_ctx->eth_stats.stop_queue++;
-		if (atomic_read(&nvchan->queue_sends) < 1 &&
-		    !net_device->tx_disable) {
-			netif_tx_wake_queue(txq);
-			ndev_ctx->eth_stats.wake_queue++;
-			ret = -ENOSPC;
-		}
 	} else {
 		netdev_err(ndev,
 			   "Unable to send packet pages %u len %u, ret %d\n",
@@ -885,6 +879,15 @@ static inline int netvsc_send_pkt(
 			   ret);
 	}
 
+	if (netif_tx_queue_stopped(txq) &&
+	    atomic_read(&nvchan->queue_sends) < 1 &&
+	    !net_device->tx_disable) {
+		netif_tx_wake_queue(txq);
+		ndev_ctx->eth_stats.wake_queue++;
+		if (ret == -EAGAIN)
+			ret = -ENOSPC;
+	}
+
 	return ret;
 }
 
-- 
2.20.1

[PATCH 4.19 056/276] Bluetooth: Ignore CC events not matching the last HCI command

[Greg Kroah-Hartman]

[ Upstream commit f80c5dad7b6467b884c445ffea45985793b4b2d0 ]

This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.

The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.

This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.

Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64)                                  0.352340
= Note: Bluetooth subsystem version 2.22                               0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0)               [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84                                 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm)                      [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14                  {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14                {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1       {0x0003} [hci0] 27.302310
        Address type: 0x06
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6   #1 [hci0] 27.302496
        Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4                 #2 [hci0] 27.419117
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7  #3 [hci0] 27.419244
        Type: Active (0x01)
        Interval: 11.250 msec (0x0012)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #4 [hci0] 27.420131
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2      #5 [hci0] 27.420259
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4                 #6 [hci0] 27.420969
      LE Set Scan Parameters (0x08|0x000b) ncmd 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #7 [hci0] 27.421983
      LE Set Scan Enable (0x08|0x000c) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4        {0x0003} [hci0] 27.422059
      Start Discovery (0x0023) plen 1
        Status: Success (0x00)
        Address type: 0x06
          LE Public
          LE Random
@ MGMT Event: Discovering (0x0013) plen 2             {0x0003} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0002} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0001} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/bluetooth/hci.h |  1 +
 net/bluetooth/hci_core.c    |  5 +++++
 net/bluetooth/hci_event.c   | 12 ++++++++++++
 net/bluetooth/hci_request.c |  5 +++++
 net/bluetooth/hci_request.h |  1 +
 5 files changed, 24 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index cdd9f1fe7cfa9..845d947dbae82 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -270,6 +270,7 @@ enum {
 	HCI_FORCE_BREDR_SMP,
 	HCI_FORCE_STATIC_ADDR,
 	HCI_LL_RPA_RESOLUTION,
+	HCI_CMD_PENDING,
 
 	__HCI_NUM_FLAGS,
 };
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index a06f030477173..5afd67ef797a6 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -4274,6 +4274,9 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
 		return;
 	}
 
+	/* If we reach this point this event matches the last command sent */
+	hci_dev_clear_flag(hdev, HCI_CMD_PENDING);
+
 	/* If the command succeeded and there's still more commands in
 	 * this request the request is not yet complete.
 	 */
@@ -4384,6 +4387,8 @@ static void hci_cmd_work(struct work_struct *work)
 
 		hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
 		if (hdev->sent_cmd) {
+			if (hci_req_status_pend(hdev))
+				hci_dev_set_flag(hdev, HCI_CMD_PENDING);
 			atomic_dec(&hdev->cmd_cnt);
 			hci_send_frame(hdev, skb);
 			if (test_bit(HCI_RESET, &hdev->flags))
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 7f800c3480f7a..3e7badb3ac2d5 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3357,6 +3357,12 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
 	hci_req_cmd_complete(hdev, *opcode, *status, req_complete,
 			     req_complete_skb);
 
+	if (hci_dev_test_flag(hdev, HCI_CMD_PENDING)) {
+		bt_dev_err(hdev,
+			   "unexpected event for opcode 0x%4.4x", *opcode);
+		return;
+	}
+
 	if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q))
 		queue_work(hdev->workqueue, &hdev->cmd_work);
 }
@@ -3464,6 +3470,12 @@ static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb,
 		hci_req_cmd_complete(hdev, *opcode, ev->status, req_complete,
 				     req_complete_skb);
 
+	if (hci_dev_test_flag(hdev, HCI_CMD_PENDING)) {
+		bt_dev_err(hdev,
+			   "unexpected event for opcode 0x%4.4x", *opcode);
+		return;
+	}
+
 	if (atomic_read(&hdev->cmd_cnt) && !skb_queue_empty(&hdev->cmd_q))
 		queue_work(hdev->workqueue, &hdev->cmd_work);
 }
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index e8c9ef1e19227..9448ebd3780a3 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -46,6 +46,11 @@ void hci_req_purge(struct hci_request *req)
 	skb_queue_purge(&req->cmd_q);
 }
 
+bool hci_req_status_pend(struct hci_dev *hdev)
+{
+	return hdev->req_status == HCI_REQ_PEND;
+}
+
 static int req_run(struct hci_request *req, hci_req_complete_t complete,
 		   hci_req_complete_skb_t complete_skb)
 {
diff --git a/net/bluetooth/hci_request.h b/net/bluetooth/hci_request.h
index 692cc8b133682..55b2050cc9ff0 100644
--- a/net/bluetooth/hci_request.h
+++ b/net/bluetooth/hci_request.h
@@ -37,6 +37,7 @@ struct hci_request {
 
 void hci_req_init(struct hci_request *req, struct hci_dev *hdev);
 void hci_req_purge(struct hci_request *req);
+bool hci_req_status_pend(struct hci_dev *hdev);
 int hci_req_run(struct hci_request *req, hci_req_complete_t complete);
 int hci_req_run_skb(struct hci_request *req, hci_req_complete_skb_t complete);
 void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
-- 
2.20.1

[PATCH 4.19 057/276] pinctrl: zte: fix leaked of_node references

[Greg Kroah-Hartman]

[ Upstream commit 02d15f0d80720545f1f4922a1550ea4aaad4e152 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.
./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/zte/pinctrl-zx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/zte/pinctrl-zx.c b/drivers/pinctrl/zte/pinctrl-zx.c
index caa44dd2880a8..3cb69309912ba 100644
--- a/drivers/pinctrl/zte/pinctrl-zx.c
+++ b/drivers/pinctrl/zte/pinctrl-zx.c
@@ -411,6 +411,7 @@ int zx_pinctrl_init(struct platform_device *pdev,
 	}
 
 	zpctl->aux_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!zpctl->aux_base)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH 4.19 058/276] ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE

[Greg Kroah-Hartman]

[ Upstream commit 16ec5dfe0327ddcf279957bffe4c8fe527088c63 ]

On kbl_rt5663_max98927, commit 38a5882e4292
    ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
    This key pair mapping to play/pause when playing Youtube

The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.

For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.

Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec

The same fix is required on Chrome kbl_da7219_max98357a.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/kbl_da7219_max98357a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c
index 38f6ab74709d0..07491a0f8fb8b 100644
--- a/sound/soc/intel/boards/kbl_da7219_max98357a.c
+++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c
@@ -188,7 +188,7 @@ static int kabylake_da7219_codec_init(struct snd_soc_pcm_runtime *rtd)
 
 	jack = &ctx->kabylake_headset;
 
-	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA);
+	snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
 	snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
 	snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
 	snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
-- 
2.20.1

[PATCH 4.19 059/276] usb: dwc2: gadget: Increase descriptors count for ISOCs

[Greg Kroah-Hartman]

[ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ]

Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 220c0f9b89b0b..03614ef64ca47 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -675,13 +675,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
 	unsigned int maxsize;
 
 	if (is_isoc)
-		maxsize = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
-					   DEV_DMA_ISOC_RX_NBYTES_LIMIT;
+		maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
+					   DEV_DMA_ISOC_RX_NBYTES_LIMIT) *
+					   MAX_DMA_DESC_NUM_HS_ISOC;
 	else
-		maxsize = DEV_DMA_NBYTES_LIMIT;
-
-	/* Above size of one descriptor was chosen, multiple it */
-	maxsize *= MAX_DMA_DESC_NUM_GENERIC;
+		maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
 
 	return maxsize;
 }
@@ -864,7 +862,7 @@ static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep,
 
 	/* Update index of last configured entry in the chain */
 	hs_ep->next_desc++;
-	if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_GENERIC)
+	if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_HS_ISOC)
 		hs_ep->next_desc = 0;
 
 	return 0;
@@ -896,7 +894,7 @@ static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep)
 	}
 
 	/* Initialize descriptor chain by Host Busy status */
-	for (i = 0; i < MAX_DMA_DESC_NUM_GENERIC; i++) {
+	for (i = 0; i < MAX_DMA_DESC_NUM_HS_ISOC; i++) {
 		desc = &hs_ep->desc_list[i];
 		desc->status = 0;
 		desc->status |= (DEV_DMA_BUFF_STS_HBUSY
@@ -2083,7 +2081,7 @@ static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep)
 		dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 
 		hs_ep->compl_desc++;
-		if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_GENERIC - 1))
+		if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_HS_ISOC - 1))
 			hs_ep->compl_desc = 0;
 		desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status;
 	}
@@ -3779,6 +3777,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	unsigned int i, val, size;
 	int ret = 0;
 	unsigned char ep_type;
+	int desc_num;
 
 	dev_dbg(hsotg->dev,
 		"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
@@ -3825,11 +3824,15 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
 		__func__, epctrl, epctrl_reg);
 
+	if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC)
+		desc_num = MAX_DMA_DESC_NUM_HS_ISOC;
+	else
+		desc_num = MAX_DMA_DESC_NUM_GENERIC;
+
 	/* Allocate DMA descriptor chain for non-ctrl endpoints */
 	if (using_desc_dma(hsotg) && !hs_ep->desc_list) {
 		hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev,
-			MAX_DMA_DESC_NUM_GENERIC *
-			sizeof(struct dwc2_dma_desc),
+			desc_num * sizeof(struct dwc2_dma_desc),
 			&hs_ep->desc_list_dma, GFP_ATOMIC);
 		if (!hs_ep->desc_list) {
 			ret = -ENOMEM;
@@ -3971,7 +3974,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 
 error2:
 	if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) {
-		dmam_free_coherent(hsotg->dev, MAX_DMA_DESC_NUM_GENERIC *
+		dmam_free_coherent(hsotg->dev, desc_num *
 			sizeof(struct dwc2_dma_desc),
 			hs_ep->desc_list, hs_ep->desc_list_dma);
 		hs_ep->desc_list = NULL;
-- 
2.20.1

[PATCH 4.19 060/276] usb: dwc3: move synchronize_irq() out of the spinlock protected block

[Greg Kroah-Hartman]

[ Upstream commit 41a91c606e7d2b74358a944525267cc451c271e8 ]

dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:

BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
 #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
 #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
 #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last  enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last  enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<00000000>]   (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14)
[<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8)
[<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8)
[<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84)
[<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54)
[<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c)
[<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588)
[<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04)
[<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc)
[<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20)
[<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160)
[<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c)
[<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c)
[<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...

Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c   | 2 ++
 drivers/usb/dwc3/gadget.c | 2 --
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 4d5c7dda8f54d..05b9ccff7447a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1591,6 +1591,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
+		synchronize_irq(dwc->irq_gadget);
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
@@ -1623,6 +1624,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 			spin_lock_irqsave(&dwc->lock, flags);
 			dwc3_gadget_suspend(dwc);
 			spin_unlock_irqrestore(&dwc->lock, flags);
+			synchronize_irq(dwc->irq_gadget);
 		}
 
 		dwc3_otg_exit(dwc);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 524104eed8a71..65ba1038b1111 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3277,8 +3277,6 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
 	dwc3_disconnect_gadget(dwc);
 	__dwc3_gadget_stop(dwc);
 
-	synchronize_irq(dwc->irq_gadget);
-
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.19 061/276] ASoC: hdmi-codec: unlock the device on startup errors

[Greg Kroah-Hartman]

[ Upstream commit 30180e8436046344b12813dc954b2e01dfdcd22d ]

If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().

Make sure the pointer cleared if an error is reported.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdmi-codec.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index d5f73c8372817..7994e8ddc7d21 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -439,8 +439,12 @@ static int hdmi_codec_startup(struct snd_pcm_substream *substream,
 		if (!ret) {
 			ret = snd_pcm_hw_constraint_eld(substream->runtime,
 							hcp->eld);
-			if (ret)
+			if (ret) {
+				mutex_lock(&hcp->current_stream_lock);
+				hcp->current_stream = NULL;
+				mutex_unlock(&hcp->current_stream_lock);
 				return ret;
+			}
 		}
 		/* Select chmap supported */
 		hdmi_codec_eld_chmap(hcp);
-- 
2.20.1

[PATCH 4.19 062/276] powerpc/perf: Return accordingly on invalid chip-id in

[Greg Kroah-Hartman]

[ Upstream commit a913e5e8b43be1d3897a141ce61c1ec071cad89c ]

Nest hardware counter memory resides in a per-chip reserve-memory.
During nest_imc_event_init(), chip-id of the event-cpu is considered to
calculate the base memory addresss for that cpu. Return, proper error
condition if the chip_id calculated is invalid.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/imc-pmu.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 1fafc32b12a0f..3cebfdf362116 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -496,6 +496,11 @@ static int nest_imc_event_init(struct perf_event *event)
 	 * Get the base memory addresss for this cpu.
 	 */
 	chip_id = cpu_to_chip_id(event->cpu);
+
+	/* Return, if chip_id is not valid */
+	if (chip_id < 0)
+		return -ENODEV;
+
 	pcni = pmu->mem_info;
 	do {
 		if (pcni->id == chip_id) {
-- 
2.20.1

[PATCH 4.19 063/276] powerpc/boot: Fix missing check of lseek() return value

[Greg Kroah-Hartman]

[ Upstream commit 5d085ec04a000fefb5182d3b03ee46ca96d8389b ]

This is detected by Coverity scan: CID: 1440481

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/boot/addnote.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 9d9f6f334d3cc..3da3e2b1b51bc 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -223,7 +223,11 @@ main(int ac, char **av)
 	PUT_16(E_PHNUM, np + 2);
 
 	/* write back */
-	lseek(fd, (long) 0, SEEK_SET);
+	i = lseek(fd, (long) 0, SEEK_SET);
+	if (i < 0) {
+		perror("lseek");
+		exit(1);
+	}
 	i = write(fd, buf, n);
 	if (i < 0) {
 		perror("write");
-- 
2.20.1

[PATCH 4.19 064/276] powerpc/perf: Fix loop exit condition in nest_imc_event_init

[Greg Kroah-Hartman]

[ Upstream commit 860b7d2286236170a36f94946d03ca9888d32571 ]

The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.

nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.

Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/imc-pmu.c               | 2 +-
 arch/powerpc/platforms/powernv/opal-imc.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c
index 3cebfdf362116..5553226770748 100644
--- a/arch/powerpc/perf/imc-pmu.c
+++ b/arch/powerpc/perf/imc-pmu.c
@@ -508,7 +508,7 @@ static int nest_imc_event_init(struct perf_event *event)
 			break;
 		}
 		pcni++;
-	} while (pcni);
+	} while (pcni->vbase != 0);
 
 	if (!flag)
 		return -ENODEV;
diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 58a07948c76e7..3d27f02695e41 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -127,7 +127,7 @@ static int imc_get_mem_addr_nest(struct device_node *node,
 								nr_chips))
 		goto error;
 
-	pmu_ptr->mem_info = kcalloc(nr_chips, sizeof(*pmu_ptr->mem_info),
+	pmu_ptr->mem_info = kcalloc(nr_chips + 1, sizeof(*pmu_ptr->mem_info),
 				    GFP_KERNEL);
 	if (!pmu_ptr->mem_info)
 		goto error;
-- 
2.20.1

[PATCH 4.19 065/276] ASoC: imx: fix fiq dependencies

[Greg Kroah-Hartman]

[ Upstream commit ea751227c813ab833609afecfeedaf0aa26f327e ]

During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:

WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
  Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
  Selected by [y]:
  - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])

sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'

The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.

The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.

Fixes: ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/Kconfig | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 2e75b5bc5f1da..f721cd4e3f972 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -173,16 +173,17 @@ config SND_MPC52xx_SOC_EFIKA
 
 endif # SND_POWERPC_SOC
 
+config SND_SOC_IMX_PCM_FIQ
+	tristate
+	default y if SND_SOC_IMX_SSI=y && (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC)
+	select FIQ
+
 if SND_IMX_SOC
 
 config SND_SOC_IMX_SSI
 	tristate
 	select SND_SOC_FSL_UTILS
 
-config SND_SOC_IMX_PCM_FIQ
-	tristate
-	select FIQ
-
 comment "SoC Audio support for Freescale i.MX boards:"
 
 config SND_MXC_SOC_WM1133_EV1
-- 
2.20.1

[PATCH 4.19 066/276] spi: pxa2xx: fix SCR (divisor) calculation

[Greg Kroah-Hartman]

[ Upstream commit 29f2133717c527f492933b0622a4aafe0b3cbe9e ]

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-pxa2xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index b624f6fb04ce5..729be74621e37 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -876,10 +876,14 @@ static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
 
 	rate = min_t(int, ssp_clk, rate);
 
+	/*
+	 * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
+	 * that the SSP transmission rate can be greater than the device rate
+	 */
 	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
-		return (ssp_clk / (2 * rate) - 1) & 0xff;
+		return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff;
 	else
-		return (ssp_clk / rate - 1) & 0xfff;
+		return (DIV_ROUND_UP(ssp_clk, rate) - 1)  & 0xfff;
 }
 
 static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data,
-- 
2.20.1

[PATCH 4.19 067/276] brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[Greg Kroah-Hartman]

[ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index 8eff2753abade..d493021f60318 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -35,9 +35,10 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 	struct brcmf_if *ifp;
 	const struct brcmf_vndr_dcmd_hdr *cmdhdr = data;
 	struct sk_buff *reply;
-	int ret, payload, ret_len;
+	unsigned int payload, ret_len;
 	void *dcmd_buf = NULL, *wr_pointer;
 	u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
+	int ret;
 
 	if (len < sizeof(*cmdhdr)) {
 		brcmf_err("vendor command too short: %d\n", len);
@@ -65,7 +66,7 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
 			brcmf_err("oversize return buffer %d\n", ret_len);
 			ret_len = BRCMF_DCMD_MAXLEN;
 		}
-		payload = max(ret_len, len) + 1;
+		payload = max_t(unsigned int, ret_len, len) + 1;
 		dcmd_buf = vzalloc(payload);
 		if (NULL == dcmd_buf)
 			return -ENOMEM;
-- 
2.20.1

[PATCH 4.19 068/276] ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()

[Greg Kroah-Hartman]

[ Upstream commit 23583f7795025e3c783b680d906509366b0906ad ]

When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.

The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.

This same problem of handling device and data nodes was already fixed
in a similar way by 'commit bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/property.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
index 693cf05b0cc44..288673cff85ea 100644
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -975,6 +975,14 @@ struct fwnode_handle *acpi_get_next_subnode(const struct fwnode_handle *fwnode,
 		const struct acpi_data_node *data = to_acpi_data_node(fwnode);
 		struct acpi_data_node *dn;
 
+		/*
+		 * We can have a combination of device and data nodes, e.g. with
+		 * hierarchical _DSD properties. Make sure the adev pointer is
+		 * restored before going through data nodes, otherwise we will
+		 * be looking for data_nodes below the last device found instead
+		 * of the common fwnode shared by device_nodes and data_nodes.
+		 */
+		adev = to_acpi_device_node(fwnode);
 		if (adev)
 			head = &adev->data.subnodes;
 		else if (data)
-- 
2.20.1

[PATCH 4.19 069/276] drm/nouveau/bar/nv50: ensure BAR is mapped

[Greg Kroah-Hartman]

[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ]

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c
index 157b076a12723..38c9c086754b6 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/nv50.c
@@ -109,7 +109,7 @@ nv50_bar_oneinit(struct nvkm_bar *base)
 	struct nvkm_device *device = bar->base.subdev.device;
 	static struct lock_class_key bar1_lock;
 	static struct lock_class_key bar2_lock;
-	u64 start, limit;
+	u64 start, limit, size;
 	int ret;
 
 	ret = nvkm_gpuobj_new(device, 0x20000, 0, false, NULL, &bar->mem);
@@ -127,7 +127,10 @@ nv50_bar_oneinit(struct nvkm_bar *base)
 
 	/* BAR2 */
 	start = 0x0100000000ULL;
-	limit = start + device->func->resource_size(device, 3);
+	size = device->func->resource_size(device, 3);
+	if (!size)
+		return -ENOMEM;
+	limit = start + size;
 
 	ret = nvkm_vmm_new(device, start, limit-- - start, NULL, 0,
 			   &bar2_lock, "bar2", &bar->bar2_vmm);
@@ -164,7 +167,10 @@ nv50_bar_oneinit(struct nvkm_bar *base)
 
 	/* BAR1 */
 	start = 0x0000000000ULL;
-	limit = start + device->func->resource_size(device, 1);
+	size = device->func->resource_size(device, 1);
+	if (!size)
+		return -ENOMEM;
+	limit = start + size;
 
 	ret = nvkm_vmm_new(device, start, limit-- - start, NULL, 0,
 			   &bar1_lock, "bar1", &bar->bar1_vmm);
-- 
2.20.1

[PATCH 4.19 070/276] media: stm32-dcmi: return appropriate error codes during probe

[Greg Kroah-Hartman]

[ Upstream commit b5b5a27bee5884860798ffd0f08e611a3942064b ]

During probe, return the provided errors value instead of -ENODEV.
This allows the driver to be deferred probed if needed.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 721564176d8c0..100a5922d75fd 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -1645,7 +1645,7 @@ static int dcmi_probe(struct platform_device *pdev)
 	dcmi->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(dcmi->rstc)) {
 		dev_err(&pdev->dev, "Could not get reset control\n");
-		return -ENODEV;
+		return PTR_ERR(dcmi->rstc);
 	}
 
 	/* Get bus characteristics from devicetree */
@@ -1660,7 +1660,7 @@ static int dcmi_probe(struct platform_device *pdev)
 	of_node_put(np);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not parse the endpoint\n");
-		return -ENODEV;
+		return ret;
 	}
 
 	if (ep.bus_type == V4L2_MBUS_CSI2) {
@@ -1673,8 +1673,9 @@ static int dcmi_probe(struct platform_device *pdev)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq <= 0) {
-		dev_err(&pdev->dev, "Could not get irq\n");
-		return -ENODEV;
+		if (irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get irq\n");
+		return irq;
 	}
 
 	dcmi->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1694,12 +1695,13 @@ static int dcmi_probe(struct platform_device *pdev)
 					dev_name(&pdev->dev), dcmi);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
-		return -ENODEV;
+		return ret;
 	}
 
 	mclk = devm_clk_get(&pdev->dev, "mclk");
 	if (IS_ERR(mclk)) {
-		dev_err(&pdev->dev, "Unable to get mclk\n");
+		if (PTR_ERR(mclk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Unable to get mclk\n");
 		return PTR_ERR(mclk);
 	}
 
-- 
2.20.1

[PATCH 4.19 071/276] ARM: vdso: Remove dependency with the arch_timer driver internals

[Greg Kroah-Hartman]

[ Upstream commit 1f5b62f09f6b314c8d70b9de5182dae4de1f94da ]

The VDSO code uses the kernel helper that was originally designed
to abstract the access between 32 and 64bit systems. It worked so
far because this function is declared as 'inline'.

As we're about to revamp that part of the code, the VDSO would
break. Let's fix it by doing what should have been done from
the start, a proper system register access.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/cp15.h   | 2 ++
 arch/arm/vdso/vgettimeofday.c | 5 +++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h
index 07e27f212dc75..d2453e2d3f1f3 100644
--- a/arch/arm/include/asm/cp15.h
+++ b/arch/arm/include/asm/cp15.h
@@ -68,6 +68,8 @@
 #define BPIALL				__ACCESS_CP15(c7, 0, c5, 6)
 #define ICIALLU				__ACCESS_CP15(c7, 0, c5, 0)
 
+#define CNTVCT				__ACCESS_CP15_64(1, c14)
+
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
 static inline unsigned long get_cr(void)
diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c
index a9dd619c6c290..7bdbf5d5c47d3 100644
--- a/arch/arm/vdso/vgettimeofday.c
+++ b/arch/arm/vdso/vgettimeofday.c
@@ -18,9 +18,9 @@
 #include <linux/compiler.h>
 #include <linux/hrtimer.h>
 #include <linux/time.h>
-#include <asm/arch_timer.h>
 #include <asm/barrier.h>
 #include <asm/bug.h>
+#include <asm/cp15.h>
 #include <asm/page.h>
 #include <asm/unistd.h>
 #include <asm/vdso_datapage.h>
@@ -123,7 +123,8 @@ static notrace u64 get_ns(struct vdso_data *vdata)
 	u64 cycle_now;
 	u64 nsec;
 
-	cycle_now = arch_counter_get_cntvct();
+	isb();
+	cycle_now = read_sysreg(CNTVCT);
 
 	cycle_delta = (cycle_now - vdata->cs_cycle_last) & vdata->cs_mask;
 
-- 
2.20.1

[PATCH 4.19 072/276] arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable

[Greg Kroah-Hartman]

[ Upstream commit 74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ]

When building with -Wunused-but-set-variable, the compiler shouts about
a number of pte_unmap() users, since this expands to an empty macro on
arm64:

  | mm/gup.c: In function 'gup_pte_range':
  | mm/gup.c:1727:16: warning: variable 'ptem' set but not used
  | [-Wunused-but-set-variable]
  | mm/gup.c: At top level:
  | mm/memory.c: In function 'copy_pte_range':
  | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/swap_state.c: In function 'swap_ra_info':
  | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/madvise.c: In function 'madvise_free_pte_range':
  | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]

Rewrite pte_unmap() as a static inline function, which silences the
warnings.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/pgtable.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 1bdeca8918a68..ea423db393644 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -444,6 +444,8 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
 	return __pmd_to_phys(pmd);
 }
 
+static inline void pte_unmap(pte_t *pte) { }
+
 /* Find an entry in the third-level page table. */
 #define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
@@ -452,7 +454,6 @@ static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
 
 #define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
 #define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
-#define pte_unmap(pte)			do { } while (0)
 #define pte_unmap_nested(pte)		do { } while (0)
 
 #define pte_set_fixmap(addr)		((pte_t *)set_fixmap_offset(FIX_PTE, addr))
-- 
2.20.1

[PATCH 4.19 073/276] powerpc/watchdog: Use hrtimers for per-CPU heartbeat

[Greg Kroah-Hartman]

[ Upstream commit 7ae3f6e130e8dc6188b59e3b4ebc2f16e9c8d053 ]

Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.

Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.

Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/watchdog.c | 81 +++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 41 deletions(-)

diff --git a/arch/powerpc/kernel/watchdog.c b/arch/powerpc/kernel/watchdog.c
index 3c6ab22a0c4e3..af3c15a1d41eb 100644
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -77,7 +77,7 @@ static u64 wd_smp_panic_timeout_tb __read_mostly; /* panic other CPUs */
 
 static u64 wd_timer_period_ms __read_mostly;  /* interval between heartbeat */
 
-static DEFINE_PER_CPU(struct timer_list, wd_timer);
+static DEFINE_PER_CPU(struct hrtimer, wd_hrtimer);
 static DEFINE_PER_CPU(u64, wd_timer_tb);
 
 /* SMP checker bits */
@@ -293,21 +293,21 @@ void soft_nmi_interrupt(struct pt_regs *regs)
 	nmi_exit();
 }
 
-static void wd_timer_reset(unsigned int cpu, struct timer_list *t)
-{
-	t->expires = jiffies + msecs_to_jiffies(wd_timer_period_ms);
-	if (wd_timer_period_ms > 1000)
-		t->expires = __round_jiffies_up(t->expires, cpu);
-	add_timer_on(t, cpu);
-}
-
-static void wd_timer_fn(struct timer_list *t)
+static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 {
 	int cpu = smp_processor_id();
 
+	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
+		return HRTIMER_NORESTART;
+
+	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
+		return HRTIMER_NORESTART;
+
 	watchdog_timer_interrupt(cpu);
 
-	wd_timer_reset(cpu, t);
+	hrtimer_forward_now(hrtimer, ms_to_ktime(wd_timer_period_ms));
+
+	return HRTIMER_RESTART;
 }
 
 void arch_touch_nmi_watchdog(void)
@@ -323,37 +323,22 @@ void arch_touch_nmi_watchdog(void)
 }
 EXPORT_SYMBOL(arch_touch_nmi_watchdog);
 
-static void start_watchdog_timer_on(unsigned int cpu)
-{
-	struct timer_list *t = per_cpu_ptr(&wd_timer, cpu);
-
-	per_cpu(wd_timer_tb, cpu) = get_tb();
-
-	timer_setup(t, wd_timer_fn, TIMER_PINNED);
-	wd_timer_reset(cpu, t);
-}
-
-static void stop_watchdog_timer_on(unsigned int cpu)
-{
-	struct timer_list *t = per_cpu_ptr(&wd_timer, cpu);
-
-	del_timer_sync(t);
-}
-
-static int start_wd_on_cpu(unsigned int cpu)
+static void start_watchdog(void *arg)
 {
+	struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer);
+	int cpu = smp_processor_id();
 	unsigned long flags;
 
 	if (cpumask_test_cpu(cpu, &wd_cpus_enabled)) {
 		WARN_ON(1);
-		return 0;
+		return;
 	}
 
 	if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
-		return 0;
+		return;
 
 	if (!cpumask_test_cpu(cpu, &watchdog_cpumask))
-		return 0;
+		return;
 
 	wd_smp_lock(&flags);
 	cpumask_set_cpu(cpu, &wd_cpus_enabled);
@@ -363,27 +348,40 @@ static int start_wd_on_cpu(unsigned int cpu)
 	}
 	wd_smp_unlock(&flags);
 
-	start_watchdog_timer_on(cpu);
+	*this_cpu_ptr(&wd_timer_tb) = get_tb();
 
-	return 0;
+	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer->function = watchdog_timer_fn;
+	hrtimer_start(hrtimer, ms_to_ktime(wd_timer_period_ms),
+		      HRTIMER_MODE_REL_PINNED);
 }
 
-static int stop_wd_on_cpu(unsigned int cpu)
+static int start_watchdog_on_cpu(unsigned int cpu)
 {
+	return smp_call_function_single(cpu, start_watchdog, NULL, true);
+}
+
+static void stop_watchdog(void *arg)
+{
+	struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer);
+	int cpu = smp_processor_id();
 	unsigned long flags;
 
 	if (!cpumask_test_cpu(cpu, &wd_cpus_enabled))
-		return 0; /* Can happen in CPU unplug case */
+		return; /* Can happen in CPU unplug case */
 
-	stop_watchdog_timer_on(cpu);
+	hrtimer_cancel(hrtimer);
 
 	wd_smp_lock(&flags);
 	cpumask_clear_cpu(cpu, &wd_cpus_enabled);
 	wd_smp_unlock(&flags);
 
 	wd_smp_clear_cpu_pending(cpu, get_tb());
+}
 
-	return 0;
+static int stop_watchdog_on_cpu(unsigned int cpu)
+{
+	return smp_call_function_single(cpu, stop_watchdog, NULL, true);
 }
 
 static void watchdog_calc_timeouts(void)
@@ -402,7 +400,7 @@ void watchdog_nmi_stop(void)
 	int cpu;
 
 	for_each_cpu(cpu, &wd_cpus_enabled)
-		stop_wd_on_cpu(cpu);
+		stop_watchdog_on_cpu(cpu);
 }
 
 void watchdog_nmi_start(void)
@@ -411,7 +409,7 @@ void watchdog_nmi_start(void)
 
 	watchdog_calc_timeouts();
 	for_each_cpu_and(cpu, cpu_online_mask, &watchdog_cpumask)
-		start_wd_on_cpu(cpu);
+		start_watchdog_on_cpu(cpu);
 }
 
 /*
@@ -423,7 +421,8 @@ int __init watchdog_nmi_probe(void)
 
 	err = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
 					"powerpc/watchdog:online",
-					start_wd_on_cpu, stop_wd_on_cpu);
+					start_watchdog_on_cpu,
+					stop_watchdog_on_cpu);
 	if (err < 0) {
 		pr_warn("could not be initialized");
 		return err;
-- 
2.20.1

[PATCH 4.19 074/276] sched/cpufreq: Fix kobject memleak

[Greg Kroah-Hartman]

[ Upstream commit 9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ]

Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.

Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().

Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c          | 1 +
 drivers/cpufreq/cpufreq_governor.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 505c9a55d5551..d3213594d1a7a 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1103,6 +1103,7 @@ static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
 				   cpufreq_global_kobject, "policy%u", cpu);
 	if (ret) {
 		pr_err("%s: failed to init policy->kobj: %d\n", __func__, ret);
+		kobject_put(&policy->kobj);
 		goto err_free_real_cpus;
 	}
 
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 6d53f7d9fc7a9..69fc5cf4782fb 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -459,6 +459,8 @@ int cpufreq_dbs_governor_init(struct cpufreq_policy *policy)
 	/* Failure, so roll back. */
 	pr_err("initialization failed (dbs_data kobject init error %d)\n", ret);
 
+	kobject_put(&dbs_data->attr_set.kobj);
+
 	policy->governor_data = NULL;
 
 	if (!have_governor_per_policy())
-- 
2.20.1

[PATCH 4.19 075/276] scsi: qla2xxx: Fix a qla24xx_enable_msix() error path

[Greg Kroah-Hartman]

[ Upstream commit 24afabdbd0b3553963a2bbf465895492b14d1107 ]

Make sure that the allocated interrupts are freed if allocating memory for
the msix_entries array fails.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_isr.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 36cbb29c84f63..88d8acf86a2a4 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3449,7 +3449,7 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 		ql_log(ql_log_fatal, vha, 0x00c8,
 		    "Failed to allocate memory for ha->msix_entries.\n");
 		ret = -ENOMEM;
-		goto msix_out;
+		goto free_irqs;
 	}
 	ha->flags.msix_enabled = 1;
 
@@ -3532,6 +3532,10 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 
 msix_out:
 	return ret;
+
+free_irqs:
+	pci_free_irq_vectors(ha->pdev);
+	goto msix_out;
 }
 
 int
-- 
2.20.1

[PATCH 4.19 076/276] scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()

[Greg Kroah-Hartman]

[ Upstream commit e209783d66bca04b5fce4429e59338517ffc1a0b ]

Implementations of the .write_pending() callback functions must guarantee
that an appropriate LIO core callback function will be called immediately or
at a later time.  Make sure that this guarantee is met for aborted SCSI
commands.

[mkp: typo]

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: 694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13.
Fixes: a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 64e2d859f6332..7ef549903124d 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -390,6 +390,8 @@ static int tcm_qla2xxx_write_pending(struct se_cmd *se_cmd)
 			cmd->se_cmd.transport_state,
 			cmd->se_cmd.t_state,
 			cmd->se_cmd.se_cmd_flags);
+		transport_generic_request_failure(&cmd->se_cmd,
+			TCM_CHECK_CONDITION_ABORT_CMD);
 		return 0;
 	}
 	cmd->trc_flags |= TRC_XFR_RDY;
-- 
2.20.1

[PATCH 4.19 077/276] scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()

[Greg Kroah-Hartman]

[ Upstream commit d4023db71108375e4194e92730ba0d32d7f07813 ]

This patch avoids that lockdep reports the following warning:

=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.1.0-rc1-dbg+ #11 Tainted: G        W
-----------------------------------------------------
rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
  qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
  qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x24d/0x2d0
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7f4/0xb60
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

4 locks held by rmdir/1478:
 #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70
 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0
 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0
 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
                    qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
                    qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x24d/0x2d0
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx]
                   qla2x00_do_dpc+0xcee/0xf30 [qla2xxx]
                   kthread+0x1d2/0x1f0
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx]
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 14568 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7f4/0xb60
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83f3d900>] __key.15805+0x0/0x40
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

stack backtrace:
CPU: 7 PID: 1478 Comm: rmdir Tainted: G        W         5.1.0-rc1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.59+0x473/0x563
 check_prev_add.constprop.43+0x1f1/0x1170
 __lock_acquire+0x11ed/0x1b60
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
 qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
 tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
 target_shutdown_sessions+0x17b/0x190 [target_core_mod]
 core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
 target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
 config_item_release+0x9f/0x120 [configfs]
 config_item_put+0x29/0x2b [configfs]
 configfs_rmdir+0x3d2/0x520 [configfs]
 vfs_rmdir+0xb3/0x1d0
 do_rmdir+0x25c/0x2d0
 __x64_sys_rmdir+0x24/0x30
 do_syscall_64+0x77/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/tcm_qla2xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 7ef549903124d..f425a9e5056bf 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -365,8 +365,9 @@ static void tcm_qla2xxx_close_session(struct se_session *se_sess)
 
 	spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
 	target_sess_cmd_list_set_waiting(se_sess);
-	tcm_qla2xxx_put_sess(sess);
 	spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
+
+	tcm_qla2xxx_put_sess(sess);
 }
 
 static u32 tcm_qla2xxx_sess_get_index(struct se_session *se_sess)
-- 
2.20.1

[PATCH 4.19 078/276] scsi: qla2xxx: Fix hardirq-unsafe locking

[Greg Kroah-Hartman]

[ Upstream commit 300ec7415c1fed5c73660f50c8e14a67e236dc0a ]

Since fc_remote_port_delete() must be called with interrupts enabled, do
not disable interrupts when calling that function. Remove the lockin calls
from around the put_sess() call. This is safe because the function that is
called when the final reference is dropped, qlt_unreg_sess(), grabs the
proper locks. This patch avoids that lockdep reports the following:

WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
  qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x2a8/0x320
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7e1/0xb50
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/2:1/62:
 #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80
 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80
 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                    qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x2a8/0x320
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                   qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                   qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                   __handle_irq_event_percpu+0x79/0x3c0
                   handle_irq_event_percpu+0x70/0xf0
                   handle_irq_event+0x5a/0x8b
                   handle_edge_irq+0x12c/0x310
                   handle_irq+0x192/0x20a
                   do_IRQ+0x73/0x160
                   ret_from_intr+0x0/0x1d
                   default_idle+0x23/0x1f0
                   arch_cpu_idle+0x15/0x20
                   default_idle_call+0x35/0x40
                   do_idle+0x2bb/0x2e0
                   cpu_startup_entry+0x1d/0x20
                   start_secondary+0x2a8/0x320
                   secondary_startup_64+0xa4/0xb0
 }
 ... key      at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst]
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 13831 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7e1/0xb50
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83ed8780>] __key.15491+0x0/0x40
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G           O      5.0.7-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst]
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.52+0x473/0x563
 __lock_acquire+0x11c0/0x23e0
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
 qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
 qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
 process_one_work+0x511/0xa80
 worker_thread+0x67/0x5b0
 kthread+0x1d2/0x1f0
 ret_from_fork+0x3a/0x50

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c  | 25 ++++++++-----------------
 drivers/scsi/qla2xxx/tcm_qla2xxx.c |  2 --
 2 files changed, 8 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index a8c67cd176256..9d7feb005acfd 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -684,7 +684,6 @@ int qla24xx_async_notify_ack(scsi_qla_host_t *vha, fc_port_t *fcport,
 void qla24xx_do_nack_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 {
 	fc_port_t *t;
-	unsigned long flags;
 
 	switch (e->u.nack.type) {
 	case SRB_NACK_PRLI:
@@ -694,10 +693,8 @@ void qla24xx_do_nack_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
 		if (t) {
 			ql_log(ql_log_info, vha, 0xd034,
 			    "%s create sess success %p", __func__, t);
-			spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
 			/* create sess has an extra kref */
 			vha->hw->tgt.tgt_ops->put_sess(e->u.nack.fcport);
-			spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
 		}
 		break;
 	}
@@ -709,9 +706,6 @@ void qla24xx_delete_sess_fn(struct work_struct *work)
 {
 	fc_port_t *fcport = container_of(work, struct fc_port, del_work);
 	struct qla_hw_data *ha = fcport->vha->hw;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ha->tgt.sess_lock, flags);
 
 	if (fcport->se_sess) {
 		ha->tgt.tgt_ops->shutdown_sess(fcport);
@@ -719,7 +713,6 @@ void qla24xx_delete_sess_fn(struct work_struct *work)
 	} else {
 		qlt_unreg_sess(fcport);
 	}
-	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
 }
 
 /*
@@ -788,8 +781,9 @@ void qlt_fc_port_added(struct scsi_qla_host *vha, fc_port_t *fcport)
 		    fcport->port_name, sess->loop_id);
 		sess->local = 0;
 	}
-	ha->tgt.tgt_ops->put_sess(sess);
 	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
+
+	ha->tgt.tgt_ops->put_sess(sess);
 }
 
 /*
@@ -4135,9 +4129,7 @@ static void __qlt_do_work(struct qla_tgt_cmd *cmd)
 	/*
 	 * Drop extra session reference from qla_tgt_handle_cmd_for_atio*(
 	 */
-	spin_lock_irqsave(&ha->tgt.sess_lock, flags);
 	ha->tgt.tgt_ops->put_sess(sess);
-	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
 	return;
 
 out_term:
@@ -4154,9 +4146,7 @@ static void __qlt_do_work(struct qla_tgt_cmd *cmd)
 	target_free_tag(sess->se_sess, &cmd->se_cmd);
 	spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
 
-	spin_lock_irqsave(&ha->tgt.sess_lock, flags);
 	ha->tgt.tgt_ops->put_sess(sess);
-	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
 }
 
 static void qlt_do_work(struct work_struct *work)
@@ -4365,9 +4355,7 @@ static int qlt_handle_cmd_for_atio(struct scsi_qla_host *vha,
 	if (!cmd) {
 		ql_dbg(ql_dbg_io, vha, 0x3062,
 		    "qla_target(%d): Allocation of cmd failed\n", vha->vp_idx);
-		spin_lock_irqsave(&ha->tgt.sess_lock, flags);
 		ha->tgt.tgt_ops->put_sess(sess);
-		spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
 		return -EBUSY;
 	}
 
@@ -6105,17 +6093,19 @@ static void qlt_abort_work(struct qla_tgt *tgt,
 	}
 
 	rc = __qlt_24xx_handle_abts(vha, &prm->abts, sess);
-	ha->tgt.tgt_ops->put_sess(sess);
 	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags2);
 
+	ha->tgt.tgt_ops->put_sess(sess);
+
 	if (rc != 0)
 		goto out_term;
 	return;
 
 out_term2:
+	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags2);
+
 	if (sess)
 		ha->tgt.tgt_ops->put_sess(sess);
-	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags2);
 
 out_term:
 	spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -6175,9 +6165,10 @@ static void qlt_tmr_work(struct qla_tgt *tgt,
 	    scsilun_to_int((struct scsi_lun *)&a->u.isp24.fcp_cmnd.lun);
 
 	rc = qlt_issue_task_mgmt(sess, unpacked_lun, fn, iocb, 0);
-	ha->tgt.tgt_ops->put_sess(sess);
 	spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
 
+	ha->tgt.tgt_ops->put_sess(sess);
+
 	if (rc != 0)
 		goto out_term;
 	return;
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index f425a9e5056bf..b8c1a739dfbd1 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -350,7 +350,6 @@ static void tcm_qla2xxx_put_sess(struct fc_port *sess)
 	if (!sess)
 		return;
 
-	assert_spin_locked(&sess->vha->hw->tgt.sess_lock);
 	kref_put(&sess->sess_kref, tcm_qla2xxx_release_session);
 }
 
@@ -832,7 +831,6 @@ static void tcm_qla2xxx_clear_nacl_from_fcport_map(struct fc_port *sess)
 
 static void tcm_qla2xxx_shutdown_sess(struct fc_port *sess)
 {
-	assert_spin_locked(&sess->vha->hw->tgt.sess_lock);
 	target_sess_cmd_list_set_waiting(sess->se_sess);
 }
 
-- 
2.20.1

[PATCH 4.19 079/276] x86/modules: Avoid breaking W^X while loading modules

[Greg Kroah-Hartman]

[ Upstream commit f2c65fb3221adc6b73b0549fc7ba892022db9797 ]

When modules and BPF filters are loaded, there is a time window in
which some memory is both writable and executable. An attacker that has
already found another vulnerability (e.g., a dangling pointer) might be
able to exploit this behavior to overwrite kernel code. Prevent having
writable executable PTEs in this stage.

In addition, avoiding having W+X mappings can also slightly simplify the
patching of modules code on initialization (e.g., by alternatives and
static-key), as would be done in the next patch. This was actually the
main motivation for this patch.

To avoid having W+X mappings, set them initially as RW (NX) and after
they are set as RO set them as X as well. Setting them as executable is
done as a separate step to avoid one core in which the old PTE is cached
(hence writable), and another which sees the updated PTE (executable),
which would break the W^X protection.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/alternative.c | 28 +++++++++++++++++++++-------
 arch/x86/kernel/module.c      |  2 +-
 include/linux/filter.h        |  1 +
 kernel/module.c               |  5 +++++
 4 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index b9d5e7c9ef43e..918a23704c0c5 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -662,15 +662,29 @@ void __init alternative_instructions(void)
  * handlers seeing an inconsistent instruction while you patch.
  */
 void *__init_or_module text_poke_early(void *addr, const void *opcode,
-					      size_t len)
+				       size_t len)
 {
 	unsigned long flags;
-	local_irq_save(flags);
-	memcpy(addr, opcode, len);
-	local_irq_restore(flags);
-	sync_core();
-	/* Could also do a CLFLUSH here to speed up CPU recovery; but
-	   that causes hangs on some VIA CPUs. */
+
+	if (boot_cpu_has(X86_FEATURE_NX) &&
+	    is_module_text_address((unsigned long)addr)) {
+		/*
+		 * Modules text is marked initially as non-executable, so the
+		 * code cannot be running and speculative code-fetches are
+		 * prevented. Just change the code.
+		 */
+		memcpy(addr, opcode, len);
+	} else {
+		local_irq_save(flags);
+		memcpy(addr, opcode, len);
+		local_irq_restore(flags);
+		sync_core();
+
+		/*
+		 * Could also do a CLFLUSH here to speed up CPU recovery; but
+		 * that causes hangs on some VIA CPUs.
+		 */
+	}
 	return addr;
 }
 
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index f58336af095c9..6645f123419c6 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -87,7 +87,7 @@ void *module_alloc(unsigned long size)
 	p = __vmalloc_node_range(size, MODULE_ALIGN,
 				    MODULES_VADDR + get_module_load_offset(),
 				    MODULES_END, GFP_KERNEL,
-				    PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
+				    PAGE_KERNEL, 0, NUMA_NO_NODE,
 				    __builtin_return_address(0));
 	if (p && (kasan_module_alloc(p, size) < 0)) {
 		vfree(p);
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 6ecef32fd8bcd..d52a7484aeb2d 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -684,6 +684,7 @@ static inline void bpf_prog_unlock_ro(struct bpf_prog *fp)
 static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr)
 {
 	set_memory_ro((unsigned long)hdr, hdr->pages);
+	set_memory_x((unsigned long)hdr, hdr->pages);
 }
 
 static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr)
diff --git a/kernel/module.c b/kernel/module.c
index 38bf28b5cc202..f797c6ace7121 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1949,8 +1949,13 @@ void module_enable_ro(const struct module *mod, bool after_init)
 		return;
 
 	frob_text(&mod->core_layout, set_memory_ro);
+	frob_text(&mod->core_layout, set_memory_x);
+
 	frob_rodata(&mod->core_layout, set_memory_ro);
+
 	frob_text(&mod->init_layout, set_memory_ro);
+	frob_text(&mod->init_layout, set_memory_x);
+
 	frob_rodata(&mod->init_layout, set_memory_ro);
 
 	if (after_init)
-- 
2.20.1

[PATCH 4.19 080/276] Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve

[Greg Kroah-Hartman]

[ Upstream commit 39ad317315887c2cb9a4347a93a8859326ddf136 ]

When doing fallocate, we first add the range to the reserve_list and
then reserve the quota.  If quota reservation fails, we'll release all
reserved parts of reserve_list.

However, cur_offset is not updated to indicate that this range is
already been inserted into the list.  Therefore, the same range is freed
twice.  Once at list_for_each_entry loop, and once at the end of the
function.  This will result in WARN_ON on bytes_may_use when we free the
remaining space.

At the end, under the 'out' label we have a call to:

   btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset);

The start offset, third argument, should be cur_offset.

Everything from alloc_start to cur_offset was freed by the
list_for_each_entry_safe_loop.

Fixes: 18513091af94 ("btrfs: update btrfs_space_info's bytes_may_use timely")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index de4d3baec1616..e24c0a69ff5d4 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -3161,6 +3161,7 @@ static long btrfs_fallocate(struct file *file, int mode,
 			ret = btrfs_qgroup_reserve_data(inode, &data_reserved,
 					cur_offset, last_byte - cur_offset);
 			if (ret < 0) {
+				cur_offset = last_byte;
 				free_extent_map(em);
 				break;
 			}
@@ -3210,7 +3211,7 @@ static long btrfs_fallocate(struct file *file, int mode,
 	/* Let go of our reservation. */
 	if (ret != 0 && !(mode & FALLOC_FL_ZERO_RANGE))
 		btrfs_free_reserved_data_space(inode, data_reserved,
-				alloc_start, alloc_end - cur_offset);
+				cur_offset, alloc_end - cur_offset);
 	extent_changeset_free(data_reserved);
 	return ret;
 }
-- 
2.20.1

[PATCH 4.19 081/276] btrfs: fix panic during relocation after ENOSPC before writeback happens

[Greg Kroah-Hartman]

[ Upstream commit ff612ba7849964b1898fd3ccd1f56941129c6aab ]

We've been seeing the following sporadically throughout our fleet

panic: kernel BUG at fs/btrfs/relocation.c:4584!
netversion: 5.0-0
Backtrace:
 #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8
 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c
 #2 [ffffc90003adb988] crash_kexec at ffffffff811048ad
 #3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a
 #4 [ffffc90003adb9c0] do_trap at ffffffff81019114
 #5 [ffffc90003adba00] do_error_trap at ffffffff810195d0
 #6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b
    [exception RIP: btrfs_reloc_cow_block+692]
    RIP: ffffffff8143b614  RSP: ffffc90003adbb68  RFLAGS: 00010246
    RAX: fffffffffffffff7  RBX: ffff8806b9c32000  RCX: ffff8806aad00690
    RDX: ffff880850b295e0  RSI: ffff8806b9c32000  RDI: ffff88084f205bd0
    RBP: ffff880849415000   R8: ffffc90003adbbe0   R9: ffff88085ac90000
    R10: ffff8805f7369140  R11: 0000000000000000  R12: ffff880850b295e0
    R13: ffff88084f205bd0  R14: 0000000000000000  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd
 #8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3
 #9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c

The way relocation moves data extents is by creating a reloc inode and
preallocating extents in this inode and then copying the data into these
preallocated extents.  Once we've done this for all of our extents,
we'll write out these dirty pages, which marks the extent written, and
goes into btrfs_reloc_cow_block().  From here we get our current
reloc_control, which _should_ match the reloc_control for the current
block group we're relocating.

However if we get an ENOSPC in this path at some point we'll bail out,
never initiating writeback on this inode.  Not a huge deal, unless we
happen to be doing relocation on a different block group, and this block
group is now rc->stage == UPDATE_DATA_PTRS.  This trips the BUG_ON() in
btrfs_reloc_cow_block(), because we expect to be done modifying the data
inode.  We are in fact done modifying the metadata for the data inode
we're currently using, but not the one from the failed block group, and
thus we BUG_ON().

(This happens when writeback finishes for extents from the previous
group, when we are at btrfs_finish_ordered_io() which updates the data
reloc tree (inode item, drops/adds extent items, etc).)

Fix this by writing out the reloc data inode always, and then breaking
out of the loop after that point to keep from tripping this BUG_ON()
later.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add note from Filipe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/relocation.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 0526b6c473c79..5d57ed6293455 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -4289,27 +4289,36 @@ int btrfs_relocate_block_group(struct btrfs_fs_info *fs_info, u64 group_start)
 		mutex_lock(&fs_info->cleaner_mutex);
 		ret = relocate_block_group(rc);
 		mutex_unlock(&fs_info->cleaner_mutex);
-		if (ret < 0) {
+		if (ret < 0)
 			err = ret;
-			goto out;
-		}
-
-		if (rc->extents_found == 0)
-			break;
-
-		btrfs_info(fs_info, "found %llu extents", rc->extents_found);
 
+		/*
+		 * We may have gotten ENOSPC after we already dirtied some
+		 * extents.  If writeout happens while we're relocating a
+		 * different block group we could end up hitting the
+		 * BUG_ON(rc->stage == UPDATE_DATA_PTRS) in
+		 * btrfs_reloc_cow_block.  Make sure we write everything out
+		 * properly so we don't trip over this problem, and then break
+		 * out of the loop if we hit an error.
+		 */
 		if (rc->stage == MOVE_DATA_EXTENTS && rc->found_file_extent) {
 			ret = btrfs_wait_ordered_range(rc->data_inode, 0,
 						       (u64)-1);
-			if (ret) {
+			if (ret)
 				err = ret;
-				goto out;
-			}
 			invalidate_mapping_pages(rc->data_inode->i_mapping,
 						 0, -1);
 			rc->stage = UPDATE_DATA_PTRS;
 		}
+
+		if (err < 0)
+			goto out;
+
+		if (rc->extents_found == 0)
+			break;
+
+		btrfs_info(fs_info, "found %llu extents", rc->extents_found);
+
 	}
 
 	WARN_ON(rc->block_group->pinned > 0);
-- 
2.20.1

[PATCH 4.19 082/276] btrfs: Dont panic when we cant find a root key

[Greg Kroah-Hartman]

[ Upstream commit 7ac1e464c4d473b517bb784f30d40da1f842482e ]

When we failed to find a root key in btrfs_update_root(), we just panic.

That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/root-tree.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c
index fb205ebeca391..3228d3b3084a4 100644
--- a/fs/btrfs/root-tree.c
+++ b/fs/btrfs/root-tree.c
@@ -135,11 +135,14 @@ int btrfs_update_root(struct btrfs_trans_handle *trans, struct btrfs_root
 	if (ret < 0)
 		goto out;
 
-	if (ret != 0) {
-		btrfs_print_leaf(path->nodes[0]);
-		btrfs_crit(fs_info, "unable to update root key %llu %u %llu",
-			   key->objectid, key->type, key->offset);
-		BUG_ON(1);
+	if (ret > 0) {
+		btrfs_crit(fs_info,
+			"unable to find root key (%llu %u %llu) in tree %llu",
+			key->objectid, key->type, key->offset,
+			root->root_key.objectid);
+		ret = -EUCLEAN;
+		btrfs_abort_transaction(trans, ret);
+		goto out;
 	}
 
 	l = path->nodes[0];
-- 
2.20.1

[PATCH 4.19 083/276] iwlwifi: pcie: dont crash on invalid RX interrupt

[Greg Kroah-Hartman]

[ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ]

If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.

Prevent that by checking that we actually have RXQs and that they
were properly allocated.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index b2905f01b7df3..6dcd5374d9b4d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1388,10 +1388,15 @@ static struct iwl_rx_mem_buffer *iwl_pcie_get_rxb(struct iwl_trans *trans,
 static void iwl_pcie_rx_handle(struct iwl_trans *trans, int queue)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
-	struct iwl_rxq *rxq = &trans_pcie->rxq[queue];
+	struct iwl_rxq *rxq;
 	u32 r, i, count = 0;
 	bool emergency = false;
 
+	if (WARN_ON_ONCE(!trans_pcie->rxq || !trans_pcie->rxq[queue].bd))
+		return;
+
+	rxq = &trans_pcie->rxq[queue];
+
 restart:
 	spin_lock(&rxq->lock);
 	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-- 
2.20.1

[PATCH 4.19 084/276] rtc: 88pm860x: prevent use-after-free on device remove

[Greg Kroah-Hartman]

[ Upstream commit f22b1ba15ee5785aa028384ebf77dd39e8e47b70 ]

The device's remove() attempts to shut down the delayed_work scheduled
on the kernel-global workqueue by calling flush_scheduled_work().

Unfortunately, flush_scheduled_work() does not prevent the delayed_work
from re-scheduling itself. The delayed_work might run after the device
has been removed, and touch the already de-allocated info structure.
This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync() during remove(): this ensures
that the delayed work is properly cancelled, is no longer running, and
is not able to re-schedule itself.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-88pm860x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-88pm860x.c b/drivers/rtc/rtc-88pm860x.c
index 01ffc0ef8033f..fbcf13bbbd8d1 100644
--- a/drivers/rtc/rtc-88pm860x.c
+++ b/drivers/rtc/rtc-88pm860x.c
@@ -414,7 +414,7 @@ static int pm860x_rtc_remove(struct platform_device *pdev)
 	struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
 
 #ifdef VRTC_CALIBRATION
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&info->calib_work);
 	/* disable measurement */
 	pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
 #endif	/* VRTC_CALIBRATION */
-- 
2.20.1

[PATCH 4.19 085/276] rtc: stm32: manage the get_irq probe defer case

[Greg Kroah-Hartman]

[ Upstream commit cf612c5949aca2bd81a1e28688957c8149ea2693 ]

Manage the -EPROBE_DEFER error case for the wake IRQ.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-stm32.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index c5908cfea2340..8e6c9b3bcc29a 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -788,11 +788,14 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 	ret = device_init_wakeup(&pdev->dev, true);
 	if (rtc->data->has_wakeirq) {
 		rtc->wakeirq_alarm = platform_get_irq(pdev, 1);
-		if (rtc->wakeirq_alarm <= 0)
-			ret = rtc->wakeirq_alarm;
-		else
+		if (rtc->wakeirq_alarm > 0) {
 			ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
 							    rtc->wakeirq_alarm);
+		} else {
+			ret = rtc->wakeirq_alarm;
+			if (rtc->wakeirq_alarm == -EPROBE_DEFER)
+				goto err;
+		}
 	}
 	if (ret)
 		dev_warn(&pdev->dev, "alarm can't wake up the system: %d", ret);
-- 
2.20.1

[PATCH 4.19 086/276] scsi: qedi: Abort ep termination if offload not scheduled

[Greg Kroah-Hartman]

[ Upstream commit f848bfd8e167210a29374e8a678892bed591684f ]

Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.

kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000
kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0
kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0
kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000
kernel: FS:  00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_iscsi.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index d4821b9dea45d..4130b9117055f 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -1001,6 +1001,9 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 	qedi_ep = ep->dd_data;
 	qedi = qedi_ep->qedi;
 
+	if (qedi_ep->state == EP_STATE_OFLDCONN_START)
+		goto ep_exit_recover;
+
 	flush_work(&qedi_ep->offload_work);
 
 	if (qedi_ep->conn) {
-- 
2.20.1

[PATCH 4.19 087/276] s390/kexec_file: Fix detection of text segment in ELF loader

[Greg Kroah-Hartman]

[ Upstream commit 729829d775c9a5217abc784b2f16087d79c4eec8 ]

To register data for the next kernel (command line, oldmem_base, etc.) the
current kernel needs to find the ELF segment that contains head.S. This is
currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for
the current kernel build but in theory the first few pages could be
skipped. Make the detection more robust by checking if the entry point lies
within the segment.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/kexec_elf.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/kexec_elf.c b/arch/s390/kernel/kexec_elf.c
index 5a286b012043b..602e7cc26d118 100644
--- a/arch/s390/kernel/kexec_elf.c
+++ b/arch/s390/kernel/kexec_elf.c
@@ -19,10 +19,15 @@ static int kexec_file_add_elf_kernel(struct kimage *image,
 	struct kexec_buf buf;
 	const Elf_Ehdr *ehdr;
 	const Elf_Phdr *phdr;
+	Elf_Addr entry;
 	int i, ret;
 
 	ehdr = (Elf_Ehdr *)kernel;
 	buf.image = image;
+	if (image->type == KEXEC_TYPE_CRASH)
+		entry = STARTUP_KDUMP_OFFSET;
+	else
+		entry = ehdr->e_entry;
 
 	phdr = (void *)ehdr + ehdr->e_phoff;
 	for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
@@ -35,7 +40,7 @@ static int kexec_file_add_elf_kernel(struct kimage *image,
 		buf.mem = ALIGN(phdr->p_paddr, phdr->p_align);
 		buf.memsz = phdr->p_memsz;
 
-		if (phdr->p_paddr == 0) {
+		if (entry - phdr->p_paddr < phdr->p_memsz) {
 			data->kernel_buf = buf.buffer;
 			data->memsz += STARTUP_NORMAL_OFFSET;
 
-- 
2.20.1

[PATCH 4.19 088/276] sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs

[Greg Kroah-Hartman]

[ Upstream commit 9b019acb72e4b5741d88e8936d6f200ed44b66b2 ]

The NOHZ idle balancer runs on the lowest idle CPU. This can
interfere with isolated CPUs, so confine it to HK_FLAG_MISC
housekeeping CPUs.

HK_FLAG_SCHED is not used for this because it is not set anywhere
at the moment. This could be folded into HK_FLAG_SCHED once that
option is fixed.

The problem was observed with increased jitter on an application
running on CPU0, caused by NOHZ idle load balancing being run on
CPU1 (an SMT sibling).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d31916366d39c..7a1e9db617f76 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -9083,22 +9083,26 @@ static inline int on_null_domain(struct rq *rq)
  * - When one of the busy CPUs notice that there may be an idle rebalancing
  *   needed, they will kick the idle load balancer, which then does idle
  *   load balancing for all the idle CPUs.
+ * - HK_FLAG_MISC CPUs are used for this task, because HK_FLAG_SCHED not set
+ *   anywhere yet.
  */
 
 static inline int find_new_ilb(void)
 {
-	int ilb = cpumask_first(nohz.idle_cpus_mask);
+	int ilb;
 
-	if (ilb < nr_cpu_ids && idle_cpu(ilb))
-		return ilb;
+	for_each_cpu_and(ilb, nohz.idle_cpus_mask,
+			      housekeeping_cpumask(HK_FLAG_MISC)) {
+		if (idle_cpu(ilb))
+			return ilb;
+	}
 
 	return nr_cpu_ids;
 }
 
 /*
- * Kick a CPU to do the nohz balancing, if it is time for it. We pick the
- * nohz_load_balancer CPU (if there is one) otherwise fallback to any idle
- * CPU (if there is one).
+ * Kick a CPU to do the nohz balancing, if it is time for it. We pick any
+ * idle CPU in the HK_FLAG_MISC housekeeping set (if there is one).
  */
 static void kick_ilb(unsigned int flags)
 {
-- 
2.20.1

[PATCH 4.19 089/276] w1: fix the resume command API

[Greg Kroah-Hartman]

[ Upstream commit 62909da8aca048ecf9fbd7e484e5100608f40a63 ]

>From the DS2408 datasheet [1]:
"Resume Command function checks the status of the RC flag and, if it is set,
 directly transfers control to the control functions, similar to a Skip ROM
 command. The only way to set the RC flag is through successfully executing
 the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
 command"

The function currently works perfectly fine in a multidrop bus, but when we
have only a single slave connected, then only a Skip ROM is used and Match
ROM is not called at all. This is leading to problems e.g. with single one
DS2408 connected, as the Resume Command is not working properly and the
device is responding with failing results after the Resume Command.

This commit is fixing this by using a Skip ROM instead in those cases.
The bandwidth / performance advantage is exactly the same.

Refs:
[1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdf

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/w1/w1_io.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 0364d3329c526..3516ce6718d94 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -432,8 +432,7 @@ int w1_reset_resume_command(struct w1_master *dev)
 	if (w1_reset_bus(dev))
 		return -1;
 
-	/* This will make only the last matched slave perform a skip ROM. */
-	w1_write_8(dev, W1_RESUME_CMD);
+	w1_write_8(dev, dev->slave_count > 1 ? W1_RESUME_CMD : W1_SKIP_ROM);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(w1_reset_resume_command);
-- 
2.20.1

[PATCH 4.19 090/276] s390: qeth: address type mismatch warning

[Greg Kroah-Hartman]

[ Upstream commit 46b83629dede262315aa82179d105581f11763b6 ]

clang produces a harmless warning for each use for the qeth_adp_supported
macro:

drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to
      different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion]
        if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported'
        qeth_is_ipa_supported(&c->options.adp, f)
        ~~~~~~~~~~~~~~~~~~~~~                  ^

Add a version of this macro that uses the correct types, and
remove the unused qeth_adp_enabled() macro that has the same
problem.

Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 2d1f6a583641b..b2657582cfcfd 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -201,6 +201,12 @@ struct qeth_vnicc_info {
 	bool rx_bcast_enabled;
 };
 
+static inline int qeth_is_adp_supported(struct qeth_ipa_info *ipa,
+		enum qeth_ipa_setadp_cmd func)
+{
+	return (ipa->supported_funcs & func);
+}
+
 static inline int qeth_is_ipa_supported(struct qeth_ipa_info *ipa,
 		enum qeth_ipa_funcs func)
 {
@@ -214,9 +220,7 @@ static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa,
 }
 
 #define qeth_adp_supported(c, f) \
-	qeth_is_ipa_supported(&c->options.adp, f)
-#define qeth_adp_enabled(c, f) \
-	qeth_is_ipa_enabled(&c->options.adp, f)
+	qeth_is_adp_supported(&c->options.adp, f)
 #define qeth_is_supported(c, f) \
 	qeth_is_ipa_supported(&c->options.ipa4, f)
 #define qeth_is_enabled(c, f) \
-- 
2.20.1

[PATCH 4.19 091/276] dmaengine: pl330: _stop: clear interrupt status

[Greg Kroah-Hartman]

[ Upstream commit 2da254cc7908105a60a6bb219d18e8dced03dcb9 ]

This patch kill instructs the DMAC to immediately terminate
execution of a thread. and then clear the interrupt status,
at last, stop generating interrupts for DMA_SEV. to guarantee
the next dma start is clean. otherwise, one interrupt maybe leave
to next start and make some mistake.

we can reporduce the problem as follows:

DMASEV: modify the event-interrupt resource, and if the INTEN sets
function as interrupt, the DMAC will set irq<event_num> HIGH to
generate interrupt. write INTCLR to clear interrupt.

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			    mask INTEN
		|				|
		|			     DMAKILL
		|				|
		|			spin_unlock_irqrestore

in above case, a interrupt was left, and if we unmask INTEN, the DMAC
will set irq<event_num> HIGH to generate interrupt.

to fix this, do as follows:

	DMA EXECUTING INSTRUCTS		DMA TERMINATE
		|				|
		|				|
	       ...			      _stop
		|				|
		|			spin_lock_irqsave
	     DMASEV				|
		|				|
		|			     DMAKILL
		|				|
		|			   clear INTCLR
		|			    mask INTEN
		|				|
		|			spin_unlock_irqrestore

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pl330.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 88750a34e8598..bc8050c025b7b 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -961,6 +961,7 @@ static void _stop(struct pl330_thread *thrd)
 {
 	void __iomem *regs = thrd->dmac->base;
 	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	u32 inten = readl(regs + INTEN);
 
 	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
 		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
@@ -973,10 +974,13 @@ static void _stop(struct pl330_thread *thrd)
 
 	_emit_KILL(0, insn);
 
-	/* Stop generating interrupts for SEV */
-	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
-
 	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+
+	/* clear the event */
+	if (inten & (1 << thrd->ev))
+		writel(1 << thrd->ev, regs + INTCLR);
+	/* Stop generating interrupts for SEV */
+	writel(inten & ~(1 << thrd->ev), regs + INTEN);
 }
 
 /* Start doing req 'idx' of thread 'thrd' */
-- 
2.20.1

[PATCH 4.19 092/276] mac80211/cfg80211: update bss channel on channel switch

[Greg Kroah-Hartman]

[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ]

FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.

Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:

	/* XXX: shouldn't really modify cfg80211-owned data! */
	ifmgd->associated->channel = sdata->csa_chandef.chan;

This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c    | 3 ---
 net/wireless/nl80211.c | 5 +++++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 3dbecae4be73c..2ac749c4a6b26 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1156,9 +1156,6 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 		goto out;
 	}
 
-	/* XXX: shouldn't really modify cfg80211-owned data! */
-	ifmgd->associated->channel = sdata->csa_chandef.chan;
-
 	ifmgd->csa_waiting_bcn = true;
 
 	ieee80211_sta_reset_beacon_monitor(sdata);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 048e004ed0ee8..c6711ead5e591 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -15441,6 +15441,11 @@ void cfg80211_ch_switch_notify(struct net_device *dev,
 
 	wdev->chandef = *chandef;
 	wdev->preset_chandef = *chandef;
+
+	if (wdev->iftype == NL80211_IFTYPE_STATION &&
+	    !WARN_ON(!wdev->current_bss))
+		wdev->current_bss->pub.channel = chandef->chan;
+
 	nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL,
 				 NL80211_CMD_CH_SWITCH_NOTIFY, 0);
 }
-- 
2.20.1

[PATCH 4.19 093/276] libbpf: fix samples/bpf build failure due to undefined UINT32_MAX

[Greg Kroah-Hartman]

[ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ]

Currently, building bpf samples will cause the following error.

    ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
     #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
                               ^
    ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
     extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
                             ^~~~~~~~~~~~~~~~

Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.

Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)

    clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
    -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
    -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
    llc -march=bpf -mcpu=generic  -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o

But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.

    gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
    -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
    -I./tools/  lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;

This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/bpf.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index 6f38164b26181..c3145ab3bdcac 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -26,6 +26,7 @@
 #include <linux/bpf.h>
 #include <stdbool.h>
 #include <stddef.h>
+#include <stdint.h>
 
 struct bpf_create_map_attr {
 	const char *name;
-- 
2.20.1

[PATCH 4.19 094/276] slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register

[Greg Kroah-Hartman]

[ Upstream commit 06d5d6b7f9948a89543e1160ef852d57892c750d ]

In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index 14a9d18306cbf..f63d1b8a09335 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1331,6 +1331,10 @@ static int of_qcom_slim_ngd_register(struct device *parent,
 			return -ENOMEM;
 
 		ngd->pdev = platform_device_alloc(QCOM_SLIM_NGD_DRV_NAME, id);
+		if (!ngd->pdev) {
+			kfree(ngd);
+			return -ENOMEM;
+		}
 		ngd->id = id;
 		ngd->pdev->dev.parent = parent;
 		ngd->pdev->driver_override = QCOM_SLIM_NGD_DRV_NAME;
-- 
2.20.1

[PATCH 4.19 095/276] ASoC: fsl_sai: Update is_slave_mode with correct value

[Greg Kroah-Hartman]

[ Upstream commit ddb351145a967ee791a0fb0156852ec2fcb746ba ]

is_slave_mode defaults to false because sai structure
that contains it is kzalloc'ed.

Anyhow, if we decide to set the following configuration
SAI slave -> SAI master, is_slave_mode will remain set on true
although SAI being master it should be set to false.

Fix this by updating is_slave_mode for each call of
fsl_sai_set_dai_fmt.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 4163f2cfc06fc..bfc5b21d0c3f9 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -268,12 +268,14 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
 	case SND_SOC_DAIFMT_CBS_CFS:
 		val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
 		val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
+		sai->is_slave_mode = false;
 		break;
 	case SND_SOC_DAIFMT_CBM_CFM:
 		sai->is_slave_mode = true;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFM:
 		val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
+		sai->is_slave_mode = false;
 		break;
 	case SND_SOC_DAIFMT_CBM_CFS:
 		val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
-- 
2.20.1

[PATCH 4.19 096/276] mwifiex: prevent an array overflow

[Greg Kroah-Hartman]

[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ]

The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function.  That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information.  The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range.  We need to cap
it to prevent an array overflow.

Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/cfp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfp.c b/drivers/net/wireless/marvell/mwifiex/cfp.c
index bfe84e55df776..f1522fb1c1e87 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfp.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfp.c
@@ -531,5 +531,8 @@ u8 mwifiex_adjust_data_rate(struct mwifiex_private *priv,
 		rate_index = (rx_rate > MWIFIEX_RATE_INDEX_OFDM0) ?
 			      rx_rate - 1 : rx_rate;
 
+	if (rate_index >= MWIFIEX_MAX_AC_RX_RATES)
+		rate_index = MWIFIEX_MAX_AC_RX_RATES - 1;
+
 	return rate_index;
 }
-- 
2.20.1

[PATCH 4.19 097/276] rsi: Fix NULL pointer dereference in kmalloc

[Greg Kroah-Hartman]

[ Upstream commit d5414c2355b20ea8201156d2e874265f1cb0d775 ]

kmalloc can fail in rsi_register_rates_channels but memcpy still attempts
to write to channels. The patch replaces these calls with kmemdup and
passes the error upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_mac80211.c | 30 ++++++++++++---------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_mac80211.c b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
index 4e510cbe0a89f..be59d66585d6d 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mac80211.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mac80211.c
@@ -188,27 +188,27 @@ bool rsi_is_cipher_wep(struct rsi_common *common)
  * @adapter: Pointer to the adapter structure.
  * @band: Operating band to be set.
  *
- * Return: None.
+ * Return: int - 0 on success, negative error on failure.
  */
-static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
+static int rsi_register_rates_channels(struct rsi_hw *adapter, int band)
 {
 	struct ieee80211_supported_band *sbands = &adapter->sbands[band];
 	void *channels = NULL;
 
 	if (band == NL80211_BAND_2GHZ) {
-		channels = kmalloc(sizeof(rsi_2ghz_channels), GFP_KERNEL);
-		memcpy(channels,
-		       rsi_2ghz_channels,
-		       sizeof(rsi_2ghz_channels));
+		channels = kmemdup(rsi_2ghz_channels, sizeof(rsi_2ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
 		sbands->band = NL80211_BAND_2GHZ;
 		sbands->n_channels = ARRAY_SIZE(rsi_2ghz_channels);
 		sbands->bitrates = rsi_rates;
 		sbands->n_bitrates = ARRAY_SIZE(rsi_rates);
 	} else {
-		channels = kmalloc(sizeof(rsi_5ghz_channels), GFP_KERNEL);
-		memcpy(channels,
-		       rsi_5ghz_channels,
-		       sizeof(rsi_5ghz_channels));
+		channels = kmemdup(rsi_5ghz_channels, sizeof(rsi_5ghz_channels),
+				   GFP_KERNEL);
+		if (!channels)
+			return -ENOMEM;
 		sbands->band = NL80211_BAND_5GHZ;
 		sbands->n_channels = ARRAY_SIZE(rsi_5ghz_channels);
 		sbands->bitrates = &rsi_rates[4];
@@ -227,6 +227,7 @@ static void rsi_register_rates_channels(struct rsi_hw *adapter, int band)
 	sbands->ht_cap.mcs.rx_mask[0] = 0xff;
 	sbands->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 	/* sbands->ht_cap.mcs.rx_highest = 0x82; */
+	return 0;
 }
 
 /**
@@ -1985,11 +1986,16 @@ int rsi_mac80211_attach(struct rsi_common *common)
 	wiphy->available_antennas_rx = 1;
 	wiphy->available_antennas_tx = 1;
 
-	rsi_register_rates_channels(adapter, NL80211_BAND_2GHZ);
+	status = rsi_register_rates_channels(adapter, NL80211_BAND_2GHZ);
+	if (status)
+		return status;
 	wiphy->bands[NL80211_BAND_2GHZ] =
 		&adapter->sbands[NL80211_BAND_2GHZ];
 	if (common->num_supp_bands > 1) {
-		rsi_register_rates_channels(adapter, NL80211_BAND_5GHZ);
+		status = rsi_register_rates_channels(adapter,
+						     NL80211_BAND_5GHZ);
+		if (status)
+			return status;
 		wiphy->bands[NL80211_BAND_5GHZ] =
 			&adapter->sbands[NL80211_BAND_5GHZ];
 	}
-- 
2.20.1

[PATCH 4.19 098/276] net: cw1200: fix a NULL pointer dereference

[Greg Kroah-Hartman]

[ Upstream commit 0ed2a005347400500a39ea7c7318f1fea57fb3ca ]

In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/main.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/st/cw1200/main.c b/drivers/net/wireless/st/cw1200/main.c
index 90dc979f260b6..c1608f0bf6d01 100644
--- a/drivers/net/wireless/st/cw1200/main.c
+++ b/drivers/net/wireless/st/cw1200/main.c
@@ -345,6 +345,11 @@ static struct ieee80211_hw *cw1200_init_common(const u8 *macaddr,
 	mutex_init(&priv->wsm_cmd_mux);
 	mutex_init(&priv->conf_mutex);
 	priv->workqueue = create_singlethread_workqueue("cw1200_wq");
+	if (!priv->workqueue) {
+		ieee80211_free_hw(hw);
+		return NULL;
+	}
+
 	sema_init(&priv->scan.lock, 1);
 	INIT_WORK(&priv->scan.work, cw1200_scan_work);
 	INIT_DELAYED_WORK(&priv->scan.probe_work, cw1200_probe_work);
-- 
2.20.1

[PATCH 4.19 099/276] nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE

[Greg Kroah-Hartman]

[ Upstream commit 01fa017484ad98fccdeaab32db0077c574b6bd6f ]

If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.

This issue encountered when the nvmet namespace was backed by a tempfile.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 2cdb3032ca0fc..abfb46378cc13 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1480,6 +1480,10 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	sector_t capacity = le64_to_cpup(&id->nsze) << (ns->lba_shift - 9);
 	unsigned short bs = 1 << ns->lba_shift;
 
+	if (ns->lba_shift > PAGE_SHIFT) {
+		/* unsupported block size, set capacity to 0 later */
+		bs = (1 << 9);
+	}
 	blk_mq_freeze_queue(disk->queue);
 	blk_integrity_unregister(disk);
 
@@ -1490,7 +1494,8 @@ static void nvme_update_disk_info(struct gendisk *disk,
 	if (ns->ms && !ns->ext &&
 	    (ns->ctrl->ops->flags & NVME_F_METADATA_SUPPORTED))
 		nvme_init_integrity(disk, ns->ms, ns->pi_type);
-	if (ns->ms && !nvme_ns_has_pi(ns) && !blk_get_integrity(disk))
+	if ((ns->ms && !nvme_ns_has_pi(ns) && !blk_get_integrity(disk)) ||
+	    ns->lba_shift > PAGE_SHIFT)
 		capacity = 0;
 
 	set_capacity(disk, capacity);
-- 
2.20.1

[PATCH 4.19 100/276] nvme-rdma: fix a NULL deref when an admin connect times out

[Greg Kroah-Hartman]

[ Upstream commit 1007709d7d06fab09bf2d007657575958676282b ]

If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.

Fixes: 4c174e636674 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 0939a4e178fb9..e4f167e35353f 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -880,8 +880,9 @@ static void nvme_rdma_teardown_admin_queue(struct nvme_rdma_ctrl *ctrl,
 {
 	blk_mq_quiesce_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_stop_queue(&ctrl->queues[0]);
-	blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_cancel_request,
-			&ctrl->ctrl);
+	if (ctrl->ctrl.admin_tagset)
+		blk_mq_tagset_busy_iter(ctrl->ctrl.admin_tagset,
+			nvme_cancel_request, &ctrl->ctrl);
 	blk_mq_unquiesce_queue(ctrl->ctrl.admin_q);
 	nvme_rdma_destroy_admin_queue(ctrl, remove);
 }
@@ -892,8 +893,9 @@ static void nvme_rdma_teardown_io_queues(struct nvme_rdma_ctrl *ctrl,
 	if (ctrl->ctrl.queue_count > 1) {
 		nvme_stop_queues(&ctrl->ctrl);
 		nvme_rdma_stop_io_queues(ctrl);
-		blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_cancel_request,
-				&ctrl->ctrl);
+		if (ctrl->ctrl.tagset)
+			blk_mq_tagset_busy_iter(ctrl->ctrl.tagset,
+				nvme_cancel_request, &ctrl->ctrl);
 		if (remove)
 			nvme_start_queues(&ctrl->ctrl);
 		nvme_rdma_destroy_io_queues(ctrl, remove);
-- 
2.20.1

[PATCH 4.19 101/276] crypto: sun4i-ss - Fix invalid calculation of hash end

[Greg Kroah-Hartman]

[ Upstream commit f87391558acf816b48f325a493d81d45dec40da0 ]

When nbytes < 4, end is wronlgy set to a negative value which, due to
uint, is then interpreted to a large value leading to a deadlock in the
following code.

This patch fix this problem.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
index a4b5ff2b72f87..f6936bb3b7be4 100644
--- a/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
+++ b/drivers/crypto/sunxi-ss/sun4i-ss-hash.c
@@ -240,7 +240,10 @@ static int sun4i_hash(struct ahash_request *areq)
 		}
 	} else {
 		/* Since we have the flag final, we can go up to modulo 4 */
-		end = ((areq->nbytes + op->len) / 4) * 4 - op->len;
+		if (areq->nbytes < 4)
+			end = 0;
+		else
+			end = ((areq->nbytes + op->len) / 4) * 4 - op->len;
 	}
 
 	/* TODO if SGlen % 4 and !op->len then DMA */
-- 
2.20.1

[PATCH 4.19 102/276] bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set

[Greg Kroah-Hartman]

[ Upstream commit 95f18c9d1310730d075499a75aaf13bcd60405a7 ]

In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used
to collect journal_replay(s) and filled by bch_journal_read().

If all goes well, bch_journal_replay() will release the list of
jounal_replay(s) at the end of the branch.

If something goes wrong, code flow will jump to the label "err:" and leave
the list unreleased.

This patch will release the list of journal_replay(s) in the case of
error detected.

v1 -> v2:
* Move the release code to the location after label 'err:' to
  simply the change.

Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 2c0d35c882ed8..d8190804aee9b 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1777,6 +1777,8 @@ static void run_cache_set(struct cache_set *c)
 	struct cache *ca;
 	struct closure cl;
 	unsigned int i;
+	LIST_HEAD(journal);
+	struct journal_replay *l;
 
 	closure_init_stack(&cl);
 
@@ -1934,6 +1936,12 @@ static void run_cache_set(struct cache_set *c)
 	set_bit(CACHE_SET_RUNNING, &c->flags);
 	return;
 err:
+	while (!list_empty(&journal)) {
+		l = list_first_entry(&journal, struct journal_replay, list);
+		list_del(&l->list);
+		kfree(l);
+	}
+
 	closure_sync(&cl);
 	/* XXX: test this, it's broken */
 	bch_cache_set_error(c, "%s", err);
-- 
2.20.1

[PATCH 4.19 103/276] bcache: return error immediately in bch_journal_replay()

[Greg Kroah-Hartman]

[ Upstream commit 68d10e6979a3b59e3cd2e90bfcafed79c4cf180a ]

When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.

So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/journal.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c
index 772258ee1f517..07da39ac2d110 100644
--- a/drivers/md/bcache/journal.c
+++ b/drivers/md/bcache/journal.c
@@ -330,9 +330,12 @@ int bch_journal_replay(struct cache_set *s, struct list_head *list)
 	list_for_each_entry(i, list, list) {
 		BUG_ON(i->pin && atomic_read(i->pin) != 1);
 
-		cache_set_err_on(n != i->j.seq, s,
-"bcache: journal entries %llu-%llu missing! (replaying %llu-%llu)",
-				 n, i->j.seq - 1, start, end);
+		if (n != i->j.seq) {
+			pr_err("bcache: journal entries %llu-%llu missing! (replaying %llu-%llu)",
+			n, i->j.seq - 1, start, end);
+			ret = -EIO;
+			goto err;
+		}
 
 		for (k = i->j.start;
 		     k < bset_bkey_last(&i->j);
-- 
2.20.1

[PATCH 4.19 104/276] bcache: fix failure in journal relplay

[Greg Kroah-Hartman]

[ Upstream commit 631207314d88e9091be02fbdd1fdadb1ae2ed79a ]

journal replay failed with messages:
Sep 10 19:10:43 ceph kernel: bcache: error on
bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries
2057493-2057567 missing! (replaying 2057493-2076601), disabling
caching

The reason is in journal_reclaim(), when discard is enabled, we send
discard command and reclaim those journal buckets whose seq is old
than the last_seq_now, but before we write a journal with last_seq_now,
the machine is restarted, so the journal with the last_seq_now is not
written to the journal bucket, and the last_seq_wrote in the newest
journal is old than last_seq_now which we expect to be, so when we doing
replay, journals from last_seq_wrote to last_seq_now are missing.

It's hard to write a journal immediately after journal_reclaim(),
and it harmless if those missed journal are caused by discarding
since those journals are already wrote to btree node. So, if miss
seqs are started from the beginning journal, we treat it as normal,
and only print a message to show the miss journal, and point out
it maybe caused by discarding.

Patch v2 add a judgement condition to ignore the missed journal
only when discard enabled as Coly suggested.

(Coly Li: rebase the patch with other changes in bch_journal_replay())

Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Tested-by: Dennis Schridde <devurandom@gmx.net>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/journal.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c
index 07da39ac2d110..f880e5eba8dd9 100644
--- a/drivers/md/bcache/journal.c
+++ b/drivers/md/bcache/journal.c
@@ -317,6 +317,18 @@ void bch_journal_mark(struct cache_set *c, struct list_head *list)
 	}
 }
 
+bool is_discard_enabled(struct cache_set *s)
+{
+	struct cache *ca;
+	unsigned int i;
+
+	for_each_cache(ca, s, i)
+		if (ca->discard)
+			return true;
+
+	return false;
+}
+
 int bch_journal_replay(struct cache_set *s, struct list_head *list)
 {
 	int ret = 0, keys = 0, entries = 0;
@@ -331,10 +343,15 @@ int bch_journal_replay(struct cache_set *s, struct list_head *list)
 		BUG_ON(i->pin && atomic_read(i->pin) != 1);
 
 		if (n != i->j.seq) {
-			pr_err("bcache: journal entries %llu-%llu missing! (replaying %llu-%llu)",
-			n, i->j.seq - 1, start, end);
-			ret = -EIO;
-			goto err;
+			if (n == start && is_discard_enabled(s))
+				pr_info("bcache: journal entries %llu-%llu may be discarded! (replaying %llu-%llu)",
+					n, i->j.seq - 1, start, end);
+			else {
+				pr_err("bcache: journal entries %llu-%llu missing! (replaying %llu-%llu)",
+					n, i->j.seq - 1, start, end);
+				ret = -EIO;
+				goto err;
+			}
 		}
 
 		for (k = i->j.start;
-- 
2.20.1

[PATCH 4.19 105/276] bcache: add failure check to run_cache_set() for journal replay

[Greg Kroah-Hartman]

[ Upstream commit ce3e4cfb59cb382f8e5ce359238aa580d4ae7778 ]

Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set().  The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.

This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().

If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index d8190804aee9b..2409507d7bff8 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1770,7 +1770,7 @@ struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
 	return NULL;
 }
 
-static void run_cache_set(struct cache_set *c)
+static int run_cache_set(struct cache_set *c)
 {
 	const char *err = "cannot allocate memory";
 	struct cached_dev *dc, *t;
@@ -1866,7 +1866,9 @@ static void run_cache_set(struct cache_set *c)
 		if (j->version < BCACHE_JSET_VERSION_UUID)
 			__uuid_write(c);
 
-		bch_journal_replay(c, &journal);
+		err = "bcache: replay journal failed";
+		if (bch_journal_replay(c, &journal))
+			goto err;
 	} else {
 		pr_notice("invalidating existing data");
 
@@ -1934,7 +1936,7 @@ static void run_cache_set(struct cache_set *c)
 	flash_devs_run(c);
 
 	set_bit(CACHE_SET_RUNNING, &c->flags);
-	return;
+	return 0;
 err:
 	while (!list_empty(&journal)) {
 		l = list_first_entry(&journal, struct journal_replay, list);
@@ -1945,6 +1947,8 @@ static void run_cache_set(struct cache_set *c)
 	closure_sync(&cl);
 	/* XXX: test this, it's broken */
 	bch_cache_set_error(c, "%s", err);
+
+	return -EIO;
 }
 
 static bool can_attach_cache(struct cache *ca, struct cache_set *c)
@@ -2008,8 +2012,11 @@ static const char *register_cache_set(struct cache *ca)
 	ca->set->cache[ca->sb.nr_this_dev] = ca;
 	c->cache_by_alloc[c->caches_loaded++] = ca;
 
-	if (c->caches_loaded == c->sb.nr_in_set)
-		run_cache_set(c);
+	if (c->caches_loaded == c->sb.nr_in_set) {
+		err = "failed to run cache set";
+		if (run_cache_set(c) < 0)
+			goto err;
+	}
 
 	return NULL;
 err:
-- 
2.20.1

[PATCH 4.19 106/276] bcache: avoid clang -Wunintialized warning

[Greg Kroah-Hartman]

[ Upstream commit 78d4eb8ad9e1d413449d1b7a060f50b6efa81ebd ]

clang has identified a code path in which it thinks a
variable may be unused:

drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        fifo_pop(&ca->free_inc, bucket);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
            ^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                  ^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                if (cond)                                               \
                    ^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                        fifo_pop(&ca->free_inc, bucket);
                        ^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
        ^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                        long bucket;
                                   ^

This cannot happen in practice because we only enter the loop
if there is at least one element in the list.

Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/alloc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c
index 7a28232d868bd..de85b3af3b39d 100644
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -327,10 +327,11 @@ static int bch_allocator_thread(void *arg)
 		 * possibly issue discards to them, then we add the bucket to
 		 * the free list:
 		 */
-		while (!fifo_empty(&ca->free_inc)) {
+		while (1) {
 			long bucket;
 
-			fifo_pop(&ca->free_inc, bucket);
+			if (!fifo_pop(&ca->free_inc, bucket))
+				break;
 
 			if (ca->discard) {
 				mutex_unlock(&ca->set->bucket_lock);
-- 
2.20.1

[PATCH 4.19 107/276] RDMA/cma: Consider scope_id while binding to ipv6 ll address

[Greg Kroah-Hartman]

[ Upstream commit 5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ]

When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.

listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X

However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.

In below example of two listeners, 2nd listener is failing with address in
use error.

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use

To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 6f5be78024762..39dc7be56884a 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1078,18 +1078,31 @@ static inline bool cma_any_addr(const struct sockaddr *addr)
 	return cma_zero_addr(addr) || cma_loopback_addr(addr);
 }
 
-static int cma_addr_cmp(struct sockaddr *src, struct sockaddr *dst)
+static int cma_addr_cmp(const struct sockaddr *src, const struct sockaddr *dst)
 {
 	if (src->sa_family != dst->sa_family)
 		return -1;
 
 	switch (src->sa_family) {
 	case AF_INET:
-		return ((struct sockaddr_in *) src)->sin_addr.s_addr !=
-		       ((struct sockaddr_in *) dst)->sin_addr.s_addr;
-	case AF_INET6:
-		return ipv6_addr_cmp(&((struct sockaddr_in6 *) src)->sin6_addr,
-				     &((struct sockaddr_in6 *) dst)->sin6_addr);
+		return ((struct sockaddr_in *)src)->sin_addr.s_addr !=
+		       ((struct sockaddr_in *)dst)->sin_addr.s_addr;
+	case AF_INET6: {
+		struct sockaddr_in6 *src_addr6 = (struct sockaddr_in6 *)src;
+		struct sockaddr_in6 *dst_addr6 = (struct sockaddr_in6 *)dst;
+		bool link_local;
+
+		if (ipv6_addr_cmp(&src_addr6->sin6_addr,
+					  &dst_addr6->sin6_addr))
+			return 1;
+		link_local = ipv6_addr_type(&dst_addr6->sin6_addr) &
+			     IPV6_ADDR_LINKLOCAL;
+		/* Link local must match their scope_ids */
+		return link_local ? (src_addr6->sin6_scope_id !=
+				     dst_addr6->sin6_scope_id) :
+				    0;
+	}
+
 	default:
 		return ib_addr_cmp(&((struct sockaddr_ib *) src)->sib_addr,
 				   &((struct sockaddr_ib *) dst)->sib_addr);
-- 
2.20.1

[PATCH 4.19 108/276] vfio-ccw: Do not call flush_workqueue while holding the spinlock

[Greg Kroah-Hartman]

[ Upstream commit cea5dde42a83b5f0a039da672f8686455936b8d8 ]

Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.

Fixes the following bug:

[  285.203430] BUG: scheduling while atomic: bash/14193/0x00000002
[  285.203434] INFO: lockdep is turned off.
....
[  285.203485] Preemption disabled at:
[  285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw]
[  285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G        W
....
[  285.203504] Call Trace:
[  285.203510] ([<0000000000113772>] show_stack+0x82/0xd0)
[  285.203514]  [<0000000000b7a102>] dump_stack+0x92/0xd0
[  285.203518]  [<000000000017b8be>] __schedule_bug+0xde/0xf8
[  285.203524]  [<0000000000b95b5a>] __schedule+0x7a/0xc38
[  285.203528]  [<0000000000b9678a>] schedule+0x72/0xb0
[  285.203533]  [<0000000000b9bfbc>] schedule_timeout+0x34/0x528
[  285.203538]  [<0000000000b97608>] wait_for_common+0x118/0x1b0
[  285.203544]  [<0000000000166d6a>] flush_workqueue+0x182/0x548
[  285.203550]  [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw]
[  285.203556]  [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw]
[  285.203562]  [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw]
[  285.203567]  [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev]
[  285.203573]  [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[  285.203578]  [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[  285.203582]  [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[  285.203588]  [<00000000003c1530>] __vfs_write+0x38/0x1a8
[  285.203593]  [<00000000003c187c>] vfs_write+0xb4/0x198
[  285.203597]  [<00000000003c1af2>] ksys_write+0x5a/0xb0
[  285.203601]  [<0000000000b9e270>] system_call+0xdc/0x2d8

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/vfio_ccw_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c
index fabd9798e4c47..0e0a743aeaf69 100644
--- a/drivers/s390/cio/vfio_ccw_drv.c
+++ b/drivers/s390/cio/vfio_ccw_drv.c
@@ -54,9 +54,9 @@ int vfio_ccw_sch_quiesce(struct subchannel *sch)
 
 			wait_for_completion_timeout(&completion, 3*HZ);
 
-			spin_lock_irq(sch->lock);
 			private->completion = NULL;
 			flush_workqueue(vfio_ccw_work_q);
+			spin_lock_irq(sch->lock);
 			ret = cio_cancel_halt_clear(sch, &iretry);
 		};
 
-- 
2.20.1

[PATCH 4.19 109/276] vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev

[Greg Kroah-Hartman]

[ Upstream commit b49bdc8602b7c9c7a977758bee4125683f73e59f ]

When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:

[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]

....

1038876.561921] Call Trace:
[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949]  [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965]  [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978]  [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024]  [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045]  [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065]  [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083]  [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098]  [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113]  [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125]  [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140]  [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155]  [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169]  [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185]  [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205]  #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230]  #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262]  [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last  enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last  enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---

Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/vfio_ccw_ops.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/vfio_ccw_ops.c b/drivers/s390/cio/vfio_ccw_ops.c
index f673e106c0415..dc5ff47de3fee 100644
--- a/drivers/s390/cio/vfio_ccw_ops.c
+++ b/drivers/s390/cio/vfio_ccw_ops.c
@@ -130,11 +130,12 @@ static int vfio_ccw_mdev_remove(struct mdev_device *mdev)
 
 	if ((private->state != VFIO_CCW_STATE_NOT_OPER) &&
 	    (private->state != VFIO_CCW_STATE_STANDBY)) {
-		if (!vfio_ccw_mdev_reset(mdev))
+		if (!vfio_ccw_sch_quiesce(private->sch))
 			private->state = VFIO_CCW_STATE_STANDBY;
 		/* The state will be NOT_OPER on error. */
 	}
 
+	cp_free(&private->cp);
 	private->mdev = NULL;
 	atomic_inc(&private->avail);
 
@@ -158,6 +159,14 @@ static void vfio_ccw_mdev_release(struct mdev_device *mdev)
 	struct vfio_ccw_private *private =
 		dev_get_drvdata(mdev_parent_dev(mdev));
 
+	if ((private->state != VFIO_CCW_STATE_NOT_OPER) &&
+	    (private->state != VFIO_CCW_STATE_STANDBY)) {
+		if (!vfio_ccw_mdev_reset(mdev))
+			private->state = VFIO_CCW_STATE_STANDBY;
+		/* The state will be NOT_OPER on error. */
+	}
+
+	cp_free(&private->cp);
 	vfio_unregister_notifier(mdev_dev(mdev), VFIO_IOMMU_NOTIFY,
 				 &private->nb);
 }
-- 
2.20.1

[PATCH 4.19 110/276] x86/build: Move _etext to actual end of .text

[Greg Kroah-Hartman]

[ Upstream commit 392bef709659abea614abfe53cf228e7a59876a4 ]

When building x86 with Clang LTO and CFI, CFI jump regions are
automatically added to the end of the .text section late in linking. As a
result, the _etext position was being labelled before the appended jump
regions, causing confusion about where the boundaries of the executable
region actually are in the running kernel, and broke at least the fault
injection code. This moves the _etext mark to outside (and immediately
after) the .text area, as it already the case on other architectures
(e.g. arm64, arm).

Reported-and-tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190423183827.GA4012@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/vmlinux.lds.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 85e6d5620188e..2fb152d813c17 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -151,11 +151,11 @@ SECTIONS
 		*(.text.__x86.indirect_thunk)
 		__indirect_thunk_end = .;
 #endif
-
-		/* End of text section */
-		_etext = .;
 	} :text = 0x9090
 
+	/* End of text section */
+	_etext = .;
+
 	NOTES :text :note
 
 	EXCEPTION_TABLE(16) :text = 0x9090
-- 
2.20.1

[PATCH 4.19 111/276] smpboot: Place the __percpu annotation correctly

[Greg Kroah-Hartman]

[ Upstream commit d4645d30b50d1691c26ff0f8fa4e718b08f8d3bb ]

The test robot reported a wrong assignment of a per-CPU variable which
it detected by using sparse and sent a report. The assignment itself is
correct. The annotation for sparse was wrong and hence the report.
The first pointer is a "normal" pointer and points to the per-CPU memory
area. That means that the __percpu annotation has to be moved.

Move the __percpu annotation to pointer which points to the per-CPU
area. This change affects only the sparse tool (and is ignored by the
compiler).

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f97f8f06a49fe ("smpboot: Provide infrastructure for percpu hotplug threads")
Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/smpboot.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h
index d0884b5250010..9d1bc65d226cc 100644
--- a/include/linux/smpboot.h
+++ b/include/linux/smpboot.h
@@ -29,7 +29,7 @@ struct smpboot_thread_data;
  * @thread_comm:	The base name of the thread
  */
 struct smp_hotplug_thread {
-	struct task_struct __percpu	**store;
+	struct task_struct		* __percpu *store;
 	struct list_head		list;
 	int				(*thread_should_run)(unsigned int cpu);
 	void				(*thread_fn)(unsigned int cpu);
-- 
2.20.1

[PATCH 4.19 112/276] x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault()

[Greg Kroah-Hartman]

[ Upstream commit a65c88e16f32aa9ef2e8caa68ea5c29bd5eb0ff0 ]

In-NMI warnings have been added to vmalloc_fault() via:

  ebc8827f75 ("x86: Barf when vmalloc and kmemcheck faults happen in NMI")

back in the time when our NMI entry code could not cope with nested NMIs.

These days, it's perfectly fine to take a fault in NMI context and we
don't have to care about the fact that IRET from the fault handler might
cause NMI nesting.

This warning has already been removed from 32-bit implementation of
vmalloc_fault() in:

  6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")

but the 64-bit version was omitted.

Remove the bogus warning also from 64-bit implementation of vmalloc_fault().

Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/fault.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 47bebfe6efa70..9d9765e4d1ef1 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -427,8 +427,6 @@ static noinline int vmalloc_fault(unsigned long address)
 	if (!(address >= VMALLOC_START && address < VMALLOC_END))
 		return -1;
 
-	WARN_ON_ONCE(in_nmi());
-
 	/*
 	 * Copy kernel mappings over when needed. This can also
 	 * happen within a race in page table update. In the later
-- 
2.20.1

[PATCH 4.19 113/276] mm/uaccess: Use unsigned long to placate UBSAN warnings on older GCC versions

[Greg Kroah-Hartman]

[ Upstream commit 29da93fea3ea39ab9b12270cc6be1b70ef201c9e ]

Randy reported objtool triggered on his (GCC-7.4) build:

  lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled
  lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled

This is due to UBSAN generating signed-overflow-UB warnings where it
should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel
uses through -fno-strict-overflow).

Make the functions use 'unsigned long' throughout.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/strncpy_from_user.c | 5 +++--
 lib/strnlen_user.c      | 4 ++--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/lib/strncpy_from_user.c b/lib/strncpy_from_user.c
index b53e1b5d80f42..e304b54c9c7dd 100644
--- a/lib/strncpy_from_user.c
+++ b/lib/strncpy_from_user.c
@@ -23,10 +23,11 @@
  * hit it), 'max' is the address space maximum (and we return
  * -EFAULT if we hit it).
  */
-static inline long do_strncpy_from_user(char *dst, const char __user *src, long count, unsigned long max)
+static inline long do_strncpy_from_user(char *dst, const char __user *src,
+					unsigned long count, unsigned long max)
 {
 	const struct word_at_a_time constants = WORD_AT_A_TIME_CONSTANTS;
-	long res = 0;
+	unsigned long res = 0;
 
 	/*
 	 * Truncate 'max' to the user-specified limit, so that
diff --git a/lib/strnlen_user.c b/lib/strnlen_user.c
index 60d0bbda8f5e5..184f80f7bacfa 100644
--- a/lib/strnlen_user.c
+++ b/lib/strnlen_user.c
@@ -28,7 +28,7 @@
 static inline long do_strnlen_user(const char __user *src, unsigned long count, unsigned long max)
 {
 	const struct word_at_a_time constants = WORD_AT_A_TIME_CONSTANTS;
-	long align, res = 0;
+	unsigned long align, res = 0;
 	unsigned long c;
 
 	/*
@@ -42,7 +42,7 @@ static inline long do_strnlen_user(const char __user *src, unsigned long count,
 	 * Do everything aligned. But that means that we
 	 * need to also expand the maximum..
 	 */
-	align = (sizeof(long) - 1) & (unsigned long)src;
+	align = (sizeof(unsigned long) - 1) & (unsigned long)src;
 	src -= align;
 	max += align;
 
-- 
2.20.1

[PATCH 4.19 114/276] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.

[Greg Kroah-Hartman]

[ Upstream commit 7f09d5a6c33be66a5ca19bf9dd1c2d90c5dfcf0d ]

This patch enables enough time to ROME controller to bootup
after we bring the enable pin out of reset.

Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support").
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_qca.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index f0d593c3fa728..77004c29da089 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -504,6 +504,8 @@ static int qca_open(struct hci_uart *hu)
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 		if (qcadev->btsoc_type != QCA_WCN3990) {
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
+			/* Controller needs time to bootup. */
+			msleep(150);
 		} else {
 			hu->init_speed = qcadev->init_speed;
 			hu->oper_speed = qcadev->oper_speed;
-- 
2.20.1

[PATCH 4.19 115/276] HID: logitech-hidpp: use RAP instead of FAP to get the protocol version

[Greg Kroah-Hartman]

[ Upstream commit 096377525cdb8251e4656085efc988bdf733fb4c ]

According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc:
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf

We should use a register-access-protocol request using the short input /
output report ids. This is necessary because 27MHz HID++ receivers have
a max-packetsize on their HIP++ endpoint of 8, so they cannot support
long reports. Using a feature-access-protocol request (which is always
long or very-long) with these will cause a timeout error, followed by
the hidpp driver treating the device as not being HID++ capable.

This commit fixes this by switching to using a rap request to get the
protocol version.

Besides being tested with a (046d:c517) 27MHz receiver with various
27MHz keyboards and mice, this has also been tested to not cause
regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with
k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver
(046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 8425d3548a414..edf224ad13369 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -725,13 +725,16 @@ static int hidpp_root_get_feature(struct hidpp_device *hidpp, u16 feature,
 
 static int hidpp_root_get_protocol_version(struct hidpp_device *hidpp)
 {
+	const u8 ping_byte = 0x5a;
+	u8 ping_data[3] = { 0, 0, ping_byte };
 	struct hidpp_report response;
 	int ret;
 
-	ret = hidpp_send_fap_command_sync(hidpp,
+	ret = hidpp_send_rap_command_sync(hidpp,
+			REPORT_ID_HIDPP_SHORT,
 			HIDPP_PAGE_ROOT_IDX,
 			CMD_ROOT_GET_PROTOCOL_VERSION,
-			NULL, 0, &response);
+			ping_data, sizeof(ping_data), &response);
 
 	if (ret == HIDPP_ERROR_INVALID_SUBID) {
 		hidpp->protocol_major = 1;
@@ -751,8 +754,14 @@ static int hidpp_root_get_protocol_version(struct hidpp_device *hidpp)
 	if (ret)
 		return ret;
 
-	hidpp->protocol_major = response.fap.params[0];
-	hidpp->protocol_minor = response.fap.params[1];
+	if (response.rap.params[2] != ping_byte) {
+		hid_err(hidpp->hid_dev, "%s: ping mismatch 0x%02x != 0x%02x\n",
+			__func__, response.rap.params[2], ping_byte);
+		return -EPROTO;
+	}
+
+	hidpp->protocol_major = response.rap.params[0];
+	hidpp->protocol_minor = response.rap.params[1];
 
 	return ret;
 }
-- 
2.20.1

[PATCH 4.19 116/276] pinctrl: pistachio: fix leaked of_node references

[Greg Kroah-Hartman]

[ Upstream commit 44a4455ac2c6b0981eace683a2b6eccf47689022 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-pistachio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index 302190d1558d9..0d7d379e9bb80 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1368,6 +1368,7 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
 		if (!of_find_property(child, "gpio-controller", NULL)) {
 			dev_err(pctl->dev,
 				"No gpio-controller property for bank %u\n", i);
+			of_node_put(child);
 			ret = -ENODEV;
 			goto err;
 		}
@@ -1375,6 +1376,7 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
 		irq = irq_of_parse_and_map(child, 0);
 		if (irq < 0) {
 			dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
+			of_node_put(child);
 			ret = irq;
 			goto err;
 		}
-- 
2.20.1

[PATCH 4.19 117/276] pinctrl: samsung: fix leaked of_node references

[Greg Kroah-Hartman]

[ Upstream commit 44b9f86cd41db6c522effa5aec251d664a52fbc0 ]

The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
index 44c6b753f692a..85ddf49a51885 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
@@ -71,6 +71,7 @@ s5pv210_retention_init(struct samsung_pinctrl_drv_data *drvdata,
 	}
 
 	clk_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!clk_base) {
 		pr_err("%s: failed to map clock registers\n", __func__);
 		return ERR_PTR(-EINVAL);
-- 
2.20.1

[PATCH 4.19 118/276] clk: rockchip: undo several noc and special clocks as critical on rk3288

[Greg Kroah-Hartman]

[ Upstream commit f4033db5b84ebe4b32c25ba2ed65ab20b628996a ]

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3288.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 450de24a1b422..45cd2897e586b 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -292,13 +292,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 6, GFLAGS),
-	COMPOSITE_NOMUX(0, "atclk", "armclk", CLK_IGNORE_UNUSED,
+	COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
 			RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 7, GFLAGS),
 	COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 8, GFLAGS),
-	GATE(0, "pclk_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
 			RK3288_CLKGATE_CON(12), 9, GFLAGS),
 	GATE(0, "cs_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(12), 10, GFLAGS),
@@ -626,7 +626,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
 			RK3288_CLKSEL_CON(22), 7, IFLAGS),
 
-	GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED,
+	GATE(0, "jtag", "ext_jtag", 0,
 			RK3288_CLKGATE_CON(4), 14, GFLAGS),
 
 	COMPOSITE_NODIV(SCLK_USBPHY480M_SRC, "usbphy480m_src", mux_usbphy480m_p, 0,
@@ -635,7 +635,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
 			RK3288_CLKSEL_CON(29), 0, 2, MFLAGS,
 			RK3288_CLKGATE_CON(3), 6, GFLAGS),
-	GATE(0, "hsicphy12m_xin12m", "xin12m", CLK_IGNORE_UNUSED,
+	GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
 			RK3288_CLKGATE_CON(13), 9, GFLAGS),
 	DIV(0, "hsicphy12m_usbphy", "sclk_hsicphy480m", 0,
 			RK3288_CLKSEL_CON(11), 8, 6, DFLAGS),
@@ -816,11 +816,6 @@ static const char *const rk3288_critical_clocks[] __initconst = {
 	"pclk_alive_niu",
 	"pclk_pd_pmu",
 	"pclk_pmu_niu",
-	"pclk_core_niu",
-	"pclk_ddrupctl0",
-	"pclk_publ0",
-	"pclk_ddrupctl1",
-	"pclk_publ1",
 	"pmu_hclk_otg0",
 };
 
-- 
2.20.1

[PATCH 4.19 119/276] perf/arm-cci: Remove broken race mitigation

[Greg Kroah-Hartman]

[ Upstream commit 0d2e2a82d4de298d006bf8eddc86829e3c7da820 ]

Uncore PMU drivers face an awkward cyclic dependency wherein:

 - They have to pick a valid online CPU to associate with before
   registering the PMU device, since it will get exposed to userspace
   immediately.
 - The PMU registration has to be be at least partly complete before
   hotplug events can be handled, since trying to migrate an
   uninitialised context would be bad.
 - The hotplug handler has to be ready as soon as a CPU is chosen, lest
   it go offline without the user-visible cpumask value getting updated.

The arm-cci driver has tried to solve this by using get_cpu() to pick
the current CPU and prevent it from disappearing while both
registrations are performed, but that results in taking mutexes with
preemption disabled, which makes certain configurations very unhappy:

[ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004
[ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 1.983342] Preemption disabled at:
[ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488
[ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1
[ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 1.983364] Call trace:
[ 1.983369] dump_backtrace+0x0/0x158
[ 1.983372] show_stack+0x24/0x30
[ 1.983378] dump_stack+0x80/0xa4
[ 1.983383] ___might_sleep+0x138/0x160
[ 1.983386] __might_sleep+0x58/0x90
[ 1.983391] __rt_mutex_lock_state+0x30/0xc0
[ 1.983395] _mutex_lock+0x24/0x30
[ 1.983400] perf_pmu_register+0x2c/0x388
[ 1.983404] cci_pmu_probe+0x2bc/0x488
[ 1.983409] platform_drv_probe+0x58/0xa8

It is not feasible to resolve all the possible races outside of the perf
core itself, so address the immediate bug by following the example of
nearly every other PMU driver and not even trying to do so. Registering
the hotplug notifier first should minimise the window in which things
can go wrong, so that's about as much as we can reasonably do here. This
also revealed an additional race in assigning the global pointer too
late relative to the hotplug notifier, which gets fixed in the process.

Reported-by: Li, Meng <Meng.Li@windriver.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm-cci.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/perf/arm-cci.c b/drivers/perf/arm-cci.c
index 1bfeb160c5b16..14a541c453e58 100644
--- a/drivers/perf/arm-cci.c
+++ b/drivers/perf/arm-cci.c
@@ -1692,21 +1692,24 @@ static int cci_pmu_probe(struct platform_device *pdev)
 	raw_spin_lock_init(&cci_pmu->hw_events.pmu_lock);
 	mutex_init(&cci_pmu->reserve_mutex);
 	atomic_set(&cci_pmu->active_events, 0);
-	cci_pmu->cpu = get_cpu();
-
-	ret = cci_pmu_init(cci_pmu, pdev);
-	if (ret) {
-		put_cpu();
-		return ret;
-	}
 
+	cci_pmu->cpu = raw_smp_processor_id();
+	g_cci_pmu = cci_pmu;
 	cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_CCI_ONLINE,
 				  "perf/arm/cci:online", NULL,
 				  cci_pmu_offline_cpu);
-	put_cpu();
-	g_cci_pmu = cci_pmu;
+
+	ret = cci_pmu_init(cci_pmu, pdev);
+	if (ret)
+		goto error_pmu_init;
+
 	pr_info("ARM %s PMU driver probed", cci_pmu->model->name);
 	return 0;
+
+error_pmu_init:
+	cpuhp_remove_state(CPUHP_AP_PERF_ARM_CCI_ONLINE);
+	g_cci_pmu = NULL;
+	return ret;
 }
 
 static int cci_pmu_remove(struct platform_device *pdev)
-- 
2.20.1

[PATCH 4.19 120/276] dmaengine: at_xdmac: remove BUG_ON macro in tasklet

[Greg Kroah-Hartman]

[ Upstream commit e2c114c06da2d9ffad5b16690abf008d6696f689 ]

Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index a75b95fac3bd5..db5b8fe1dd4ab 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1606,7 +1606,11 @@ static void at_xdmac_tasklet(unsigned long data)
 					struct at_xdmac_desc,
 					xfer_node);
 		dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
-		BUG_ON(!desc->active_xfer);
+		if (!desc->active_xfer) {
+			dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting");
+			spin_unlock_bh(&atchan->lock);
+			return;
+		}
 
 		txd = &desc->tx_dma_desc;
 
-- 
2.20.1

[PATCH 4.19 121/276] media: coda: clear error return value before picture run

[Greg Kroah-Hartman]

[ Upstream commit bbeefa7357a648afe70e7183914c87c3878d528d ]

The error return value is not written by some firmware codecs, such as
MPEG-2 decode on CodaHx4. Clear the error return value before starting
the picture run to avoid misinterpreting unrelated values returned by
sequence initialization as error return value.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/coda-bit.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index d20d3df5778bc..a3cfefdbee127 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -1999,6 +1999,9 @@ static int coda_prepare_decode(struct coda_ctx *ctx)
 	/* Clear decode success flag */
 	coda_write(dev, 0, CODA_RET_DEC_PIC_SUCCESS);
 
+	/* Clear error return value */
+	coda_write(dev, 0, CODA_RET_DEC_PIC_ERR_MB);
+
 	trace_coda_dec_pic_run(ctx, meta);
 
 	coda_command_async(ctx, CODA_COMMAND_PIC_RUN);
-- 
2.20.1

[PATCH 4.19 122/276] media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper

[Greg Kroah-Hartman]

[ Upstream commit ccdd85d518d8b9320ace1d87271f0ba2175f21fa ]

In preparation for adding asynchronous subdevice support to the driver,
don't acquire v4l2_clk from the driver .probe() callback as that may
fail if the clock is provided by a bridge driver which may be not yet
initialized.  Move the v4l2_clk_get() to ov6650_video_probe() helper
which is going to be converted to v4l2_subdev_internal_ops.registered()
callback, executed only when the bridge driver is ready.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov6650.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index a9264d515e546..edded869d7920 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -811,9 +811,16 @@ static int ov6650_video_probe(struct i2c_client *client)
 	u8		pidh, pidl, midh, midl;
 	int		ret;
 
+	priv->clk = v4l2_clk_get(&client->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(&client->dev, "v4l2_clk request err: %d\n", ret);
+		return ret;
+	}
+
 	ret = ov6650_s_power(&priv->subdev, 1);
 	if (ret < 0)
-		return ret;
+		goto eclkput;
 
 	msleep(20);
 
@@ -850,6 +857,11 @@ static int ov6650_video_probe(struct i2c_client *client)
 
 done:
 	ov6650_s_power(&priv->subdev, 0);
+	if (!ret)
+		return 0;
+eclkput:
+	v4l2_clk_put(priv->clk);
+
 	return ret;
 }
 
@@ -992,18 +1004,9 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->code	  = MEDIA_BUS_FMT_YUYV8_2X8;
 	priv->colorspace  = V4L2_COLORSPACE_JPEG;
 
-	priv->clk = v4l2_clk_get(&client->dev, NULL);
-	if (IS_ERR(priv->clk)) {
-		ret = PTR_ERR(priv->clk);
-		goto eclkget;
-	}
-
 	ret = ov6650_video_probe(client);
-	if (ret) {
-		v4l2_clk_put(priv->clk);
-eclkget:
+	if (ret)
 		v4l2_ctrl_handler_free(&priv->hdl);
-	}
 
 	return ret;
 }
-- 
2.20.1

[PATCH 4.19 123/276] media: au0828: stop video streaming only when last user stops

[Greg Kroah-Hartman]

[ Upstream commit f604f0f5afb88045944567f604409951b5eb6af8 ]

If the application was streaming from both videoX and vbiX, and streaming
from videoX was stopped, then the vbi streaming also stopped.

The cause being that stop_streaming for video stopped the subdevs as well,
instead of only doing that if dev->streaming_users reached 0.

au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs
at all when dev->streaming_users reached 0.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/au0828/au0828-video.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 62b45062b1e68..72095465856a2 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -839,9 +839,9 @@ int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count)
 			return rc;
 		}
 
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
+
 		if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-			v4l2_device_call_all(&dev->v4l2_dev, 0, video,
-						s_stream, 1);
 			dev->vid_timeout_running = 1;
 			mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
 		} else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
@@ -861,10 +861,11 @@ static void au0828_stop_streaming(struct vb2_queue *vq)
 
 	dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users);
 
-	if (dev->streaming_users-- == 1)
+	if (dev->streaming_users-- == 1) {
 		au0828_uninit_isoc(dev);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+	}
 
-	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
 	dev->vid_timeout_running = 0;
 	del_timer_sync(&dev->vid_timeout);
 
@@ -893,8 +894,10 @@ void au0828_stop_vbi_streaming(struct vb2_queue *vq)
 	dprintk(1, "au0828_stop_vbi_streaming called %d\n",
 		dev->streaming_users);
 
-	if (dev->streaming_users-- == 1)
+	if (dev->streaming_users-- == 1) {
 		au0828_uninit_isoc(dev);
+		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
+	}
 
 	spin_lock_irqsave(&dev->slock, flags);
 	if (dev->isoc_ctl.vbi_buf != NULL) {
-- 
2.20.1

[PATCH 4.19 124/276] media: ov2659: make S_FMT succeed even if requested format doesnt match

[Greg Kroah-Hartman]

[ Upstream commit bccb89cf9cd07a0690d519696a00c00a973b3fe4 ]

This driver returns an error if unsupported media bus pixel code is
requested by VIDIOC_SUBDEV_S_FMT.

But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst,

Drivers must not return an error solely because the requested format
doesn't match the device capabilities. They must instead modify the
format to match what the hardware can provide.

So select default format code and return success in that case.

This is detected by v4l2-compliance.

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov2659.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 4715edc8ca33e..e6a8b5669b9cc 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1117,8 +1117,10 @@ static int ov2659_set_fmt(struct v4l2_subdev *sd,
 		if (ov2659_formats[index].code == mf->code)
 			break;
 
-	if (index < 0)
-		return -EINVAL;
+	if (index < 0) {
+		index = 0;
+		mf->code = ov2659_formats[index].code;
+	}
 
 	mf->colorspace = V4L2_COLORSPACE_SRGB;
 	mf->field = V4L2_FIELD_NONE;
-- 
2.20.1

[PATCH 4.19 125/276] audit: fix a memory leak bug

[Greg Kroah-Hartman]

[ Upstream commit 70c4cf17e445264453bc5323db3e50aa0ac9e81f ]

In audit_rule_change(), audit_data_to_entry() is firstly invoked to
translate the payload data to the kernel's rule representation. In
audit_data_to_entry(), depending on the audit field type, an audit tree may
be created in audit_make_tree(), which eventually invokes kmalloc() to
allocate the tree.  Since this tree is a temporary tree, it will be then
freed in the following execution, e.g., audit_add_rule() if the message
type is AUDIT_ADD_RULE or audit_del_rule() if the message type is
AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor
AUDIT_DEL_RULE, i.e., the default case of the switch statement, this
temporary tree is not freed.

To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE
or AUDIT_DEL_RULE.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/auditfilter.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index bf309f2592c46..425c67e4f5681 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1114,22 +1114,24 @@ int audit_rule_change(int type, int seq, void *data, size_t datasz)
 	int err = 0;
 	struct audit_entry *entry;
 
-	entry = audit_data_to_entry(data, datasz);
-	if (IS_ERR(entry))
-		return PTR_ERR(entry);
-
 	switch (type) {
 	case AUDIT_ADD_RULE:
+		entry = audit_data_to_entry(data, datasz);
+		if (IS_ERR(entry))
+			return PTR_ERR(entry);
 		err = audit_add_rule(entry);
 		audit_log_rule_change("add_rule", &entry->rule, !err);
 		break;
 	case AUDIT_DEL_RULE:
+		entry = audit_data_to_entry(data, datasz);
+		if (IS_ERR(entry))
+			return PTR_ERR(entry);
 		err = audit_del_rule(entry);
 		audit_log_rule_change("remove_rule", &entry->rule, !err);
 		break;
 	default:
-		err = -EINVAL;
 		WARN_ON(1);
+		return -EINVAL;
 	}
 
 	if (err || type == AUDIT_DEL_RULE) {
-- 
2.20.1

[PATCH 4.19 126/276] media: stm32-dcmi: fix crash when subdev do not expose any formats

[Greg Kroah-Hartman]

[ Upstream commit 33dfeb62e23c31619d2197850f7e8b50e8cc5466 ]

Do not access sd_formats[] if num_of_sd_formats is zero, ie
subdev sensor didn't expose any formats.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 100a5922d75fd..d386822658922 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -808,6 +808,9 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
 
 	sd_fmt = find_format_by_fourcc(dcmi, pix->pixelformat);
 	if (!sd_fmt) {
+		if (!dcmi->num_of_sd_formats)
+			return -ENODATA;
+
 		sd_fmt = dcmi->sd_formats[dcmi->num_of_sd_formats - 1];
 		pix->pixelformat = sd_fmt->fourcc;
 	}
@@ -986,6 +989,9 @@ static int dcmi_set_sensor_format(struct stm32_dcmi *dcmi,
 
 	sd_fmt = find_format_by_fourcc(dcmi, pix->pixelformat);
 	if (!sd_fmt) {
+		if (!dcmi->num_of_sd_formats)
+			return -ENODATA;
+
 		sd_fmt = dcmi->sd_formats[dcmi->num_of_sd_formats - 1];
 		pix->pixelformat = sd_fmt->fourcc;
 	}
-- 
2.20.1

[PATCH 4.19 127/276] media: au0828: Fix NULL pointer dereference in au0828_analog_stream_enable()

[Greg Kroah-Hartman]

[ Upstream commit 898bc40bfcc26abb6e06e960d6d4754c36c58b50 ]

Fix au0828_analog_stream_enable() to check if device is in the right
state first. When unbind happens while bind is in progress, usbdev
pointer could be invalid in au0828_analog_stream_enable() and a call
to usb_ifnum_to_if() will result in the null pointer dereference.

This problem is found with the new media_dev_allocator.sh test.

kernel: [  590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8
kernel: [  590.359627] #PF error: [normal kernel read fault]
kernel: [  590.359629] PGD 0 P4D 0
kernel: [  590.359632] Oops: 0000 [#1] SMP PTI
kernel: [  590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30
kernel: [  590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013
kernel: [  590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60
kernel: [  590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4
 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6
6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c
9 74
kernel: [  590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246
kernel: [  590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000
kernel: [  590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000
kernel: [  590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50
kernel: [  590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000
kernel: [  590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000
kernel: [  590.359654] FS:  00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000
kernel: [  590.359655] CS:  0010 DS: 0000 ES: 0000 CR0: 00 00000080050033
kernel: [  590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0
kernel: [  590.359658] Call Trace:
kernel: [  590.359664]  ? au0828_analog_stream_enable+0x2c/0x180
kernel: [  590.359666]  au0828_v4l2_open+0xa4/0x110
kernel: [  590.359670]  v4l2_open+0x8b/0x120
kernel: [  590.359674]  chrdev_open+0xa6/0x1c0
kernel: [  590.359676]  ? cdev_put.part.3+0x20/0x20
kernel: [  590.359678]  do_dentry_open+0x1f6/0x360
kernel: [  590.359681]  vfs_open+0x2f/0x40
kernel: [  590.359684]  path_openat+0x299/0xc20
kernel: [  590.359688]  do_filp_open+0x9b/0x110
kernel: [  590.359695]  ? _raw_spin_unlock+0x27/0x40
kernel: [  590.359697]  ? __alloc_fd+0xb2/0x160
kernel: [  590.359700]  do_sys_open+0x1ba/0x260
kernel: [  590.359702]  ? do_sys_open+0x1ba/0x260
kernel: [  590.359712]  __x64_sys_openat+0x20/0x30
kernel: [  590.359715]  do_syscall_64+0x5a/0x120
kernel: [  590.359718]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/au0828/au0828-video.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c
index 72095465856a2..3e111f7f56dfe 100644
--- a/drivers/media/usb/au0828/au0828-video.c
+++ b/drivers/media/usb/au0828/au0828-video.c
@@ -758,6 +758,9 @@ static int au0828_analog_stream_enable(struct au0828_dev *d)
 
 	dprintk(1, "au0828_analog_stream_enable called\n");
 
+	if (test_bit(DEV_DISCONNECTED, &d->dev_state))
+		return -ENODEV;
+
 	iface = usb_ifnum_to_if(d->usbdev, 0);
 	if (iface && iface->cur_altsetting->desc.bAlternateSetting != 5) {
 		dprintk(1, "Changing intf#0 to alt 5\n");
-- 
2.20.1

[PATCH 4.19 128/276] media: pvrusb2: Prevent a buffer overflow

[Greg Kroah-Hartman]

[ Upstream commit c1ced46c7b49ad7bc064e68d966e0ad303f917fb ]

The ctrl_check_input() function is called from pvr2_ctrl_range_check().
It's supposed to validate user supplied input and return true or false
depending on whether the input is valid or not.  The problem is that
negative shifts or shifts greater than 31 are undefined in C.  In
practice with GCC they result in shift wrapping so this function returns
true for some inputs which are not valid and this could result in a
buffer overflow:

    drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname()
    warn: uncapped user index 'names[val]'

The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create()
and the highest valid bit is BIT(4).

Fixes: 7fb20fa38caa ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 2 ++
 drivers/media/usb/pvrusb2/pvrusb2-hdw.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
index a8519da0020bf..673fdca8d2dac 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -666,6 +666,8 @@ static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp)
 
 static int ctrl_check_input(struct pvr2_ctrl *cptr,int v)
 {
+	if (v < 0 || v > PVR2_CVAL_INPUT_MAX)
+		return 0;
 	return ((1 << v) & cptr->hdw->input_allowed_mask) != 0;
 }
 
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
index 25648add77e58..bd2b7a67b7322 100644
--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.h
@@ -50,6 +50,7 @@
 #define PVR2_CVAL_INPUT_COMPOSITE 2
 #define PVR2_CVAL_INPUT_SVIDEO 3
 #define PVR2_CVAL_INPUT_RADIO 4
+#define PVR2_CVAL_INPUT_MAX PVR2_CVAL_INPUT_RADIO
 
 enum pvr2_config {
 	pvr2_config_empty,    /* No configuration */
-- 
2.20.1

[PATCH 4.19 129/276] iio: adc: stm32-dfsdm: fix unmet direct dependencies detected

[Greg Kroah-Hartman]

[ Upstream commit ba7ecfe43d6bf12e2aa76705c45f7d187ae3d7c0 ]

This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC
is selected:

WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER
  Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
  Selected by [y]:
  - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] ||
    COMPILE_TEST [=n])

Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 4a754921fb6f9..9421c1ec86f73 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -696,6 +696,7 @@ config STM32_DFSDM_ADC
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
 	select STM32_DFSDM_CORE
 	select REGMAP_MMIO
+	select IIO_BUFFER
 	select IIO_BUFFER_HW_CONSUMER
 	help
 	  Select this option to support ADCSigma delta modulator for
-- 
2.20.1

[PATCH 4.19 130/276] block: fix use-after-free on gendisk

[Greg Kroah-Hartman]

[ Upstream commit 2c88e3c7ec32d7a40cc7c9b4a487cf90e4671bdd ]

commit 2da78092dda "block: Fix dev_t minor allocation lifetime"
specifically moved blk_free_devt(dev->devt) call to part_release()
to avoid reallocating device number before the device is fully
shutdown.

However, it can cause use-after-free on gendisk in get_gendisk().
We use md device as example to show the race scenes:

Process1		Worker			Process2
md_free
						blkdev_open
del_gendisk
  add delete_partition_work_fn() to wq
  						__blkdev_get
						get_gendisk
put_disk
  disk_release
    kfree(disk)
    						find part from ext_devt_idr
						get_disk_and_module(disk)
    					  	cause use after free

    			delete_partition_work_fn
			put_device(part)
    		  	part_release
		    	remove part from ext_devt_idr

Before <devt, hd_struct pointer> is removed from ext_devt_idr by
delete_partition_work_fn(), we can find the devt and then access
gendisk by hd_struct pointer. But, if we access the gendisk after
it have been freed, it can cause in use-after-freeon gendisk in
get_gendisk().

We fix this by adding a new helper blk_invalidate_devt() in
delete_partition() and del_gendisk(). It replaces hd_struct
pointer in idr with value 'NULL', and deletes the entry from
idr in part_release() as we do now.

Thanks to Jan Kara for providing the solution and more clear comments
for the code.

Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/genhd.c             | 19 +++++++++++++++++++
 block/partition-generic.c |  7 +++++++
 include/linux/genhd.h     |  1 +
 3 files changed, 27 insertions(+)

diff --git a/block/genhd.c b/block/genhd.c
index be5bab20b2abf..2b2a936cf8480 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -518,6 +518,18 @@ void blk_free_devt(dev_t devt)
 	}
 }
 
+/**
+ *	We invalidate devt by assigning NULL pointer for devt in idr.
+ */
+void blk_invalidate_devt(dev_t devt)
+{
+	if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
+		spin_lock_bh(&ext_devt_lock);
+		idr_replace(&ext_devt_idr, NULL, blk_mangle_minor(MINOR(devt)));
+		spin_unlock_bh(&ext_devt_lock);
+	}
+}
+
 static char *bdevt_str(dev_t devt, char *buf)
 {
 	if (MAJOR(devt) <= 0xff && MINOR(devt) <= 0xff) {
@@ -769,6 +781,13 @@ void del_gendisk(struct gendisk *disk)
 
 	if (!(disk->flags & GENHD_FL_HIDDEN))
 		blk_unregister_region(disk_devt(disk), disk->minors);
+	/*
+	 * Remove gendisk pointer from idr so that it cannot be looked up
+	 * while RCU period before freeing gendisk is running to prevent
+	 * use-after-free issues. Note that the device number stays
+	 * "in-use" until we really free the gendisk.
+	 */
+	blk_invalidate_devt(disk_devt(disk));
 
 	kobject_put(disk->part0.holder_dir);
 	kobject_put(disk->slave_dir);
diff --git a/block/partition-generic.c b/block/partition-generic.c
index 5f8db5c5140f4..98d60a59b843c 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -289,6 +289,13 @@ void delete_partition(struct gendisk *disk, int partno)
 	kobject_put(part->holder_dir);
 	device_del(part_to_dev(part));
 
+	/*
+	 * Remove gendisk pointer from idr so that it cannot be looked up
+	 * while RCU period before freeing gendisk is running to prevent
+	 * use-after-free issues. Note that the device number stays
+	 * "in-use" until we really free the gendisk.
+	 */
+	blk_invalidate_devt(part_devt(part));
 	hd_struct_kill(part);
 }
 
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index f767293b00e66..f13272d843320 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -596,6 +596,7 @@ struct unixware_disklabel {
 
 extern int blk_alloc_devt(struct hd_struct *part, dev_t *devt);
 extern void blk_free_devt(dev_t devt);
+extern void blk_invalidate_devt(dev_t devt);
 extern dev_t blk_lookup_devt(const char *name, int partno);
 extern char *disk_name (struct gendisk *hd, int partno, char *buf);
 
-- 
2.20.1

[PATCH 4.19 131/276] powerpc/numa: improve control of topology updates

[Greg Kroah-Hartman]

[ Upstream commit 2d4d9b308f8f8dec68f6dbbff18c68ec7c6bd26f ]

When booted with "topology_updates=no", or when "off" is written to
/proc/powerpc/topology_updates, NUMA reassignments are inhibited for
PRRN and VPHN events. However, migration and suspend unconditionally
re-enable reassignments via start_topology_update(). This is
incoherent.

Check the topology_updates_enabled flag in
start/stop_topology_update() so that callers of those APIs need not be
aware of whether reassignments are enabled. This allows the
administrative decision on reassignments to remain in force across
migrations and suspensions.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/mm/numa.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 10fb43efef508..f473c05e96497 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -1495,6 +1495,9 @@ int start_topology_update(void)
 {
 	int rc = 0;
 
+	if (!topology_updates_enabled)
+		return 0;
+
 	if (firmware_has_feature(FW_FEATURE_PRRN)) {
 		if (!prrn_enabled) {
 			prrn_enabled = 1;
@@ -1524,6 +1527,9 @@ int stop_topology_update(void)
 {
 	int rc = 0;
 
+	if (!topology_updates_enabled)
+		return 0;
+
 	if (prrn_enabled) {
 		prrn_enabled = 0;
 #ifdef CONFIG_SMP
@@ -1579,11 +1585,13 @@ static ssize_t topology_write(struct file *file, const char __user *buf,
 
 	kbuf[read_len] = '\0';
 
-	if (!strncmp(kbuf, "on", 2))
+	if (!strncmp(kbuf, "on", 2)) {
+		topology_updates_enabled = true;
 		start_topology_update();
-	else if (!strncmp(kbuf, "off", 3))
+	} else if (!strncmp(kbuf, "off", 3)) {
 		stop_topology_update();
-	else
+		topology_updates_enabled = false;
+	} else
 		return -EINVAL;
 
 	return count;
@@ -1598,9 +1606,7 @@ static const struct file_operations topology_ops = {
 
 static int topology_update_init(void)
 {
-	/* Do not poll for changes if disabled at boot */
-	if (topology_updates_enabled)
-		start_topology_update();
+	start_topology_update();
 
 	if (vphn_enabled)
 		topology_schedule_update();
-- 
2.20.1

[PATCH 4.19 132/276] powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX

[Greg Kroah-Hartman]

[ Upstream commit 56c46bba9bbfe229b4472a5be313c44c5b714a39 ]

With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M
boundary.  This is necessary so that it can be repurposed later with
different permissions.  However, in kernels with text larger than 16M,
this pushes early_setup past 32M, incapable of being reached by the
branch instruction.

Fix this by setting the CTR and branching there instead.

Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Fix it to work on BE by using DOTSYM()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/head_64.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 4898e9491a1cd..9168a247e24ff 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -970,7 +970,9 @@ start_here_multiplatform:
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
-	bl	early_setup		/* also sets r13 and SPRG_PACA */
+	LOAD_REG_ADDR(r12, DOTSYM(early_setup))
+	mtctr	r12
+	bctrl		/* also sets r13 and SPRG_PACA */
 
 	LOAD_REG_ADDR(r3, start_here_common)
 	ld	r4,PACAKMSR(r13)
-- 
2.20.1

[PATCH 4.19 133/276] random: fix CRNG initialization when random.trust_cpu=1

[Greg Kroah-Hartman]

[ Upstream commit fe6f1a6a8eedc1aa538fee0baa612b6a59639cf8 ]

When the system boots with random.trust_cpu=1 it doesn't initialize the
per-NUMA CRNGs because it skips the rest of the CRNG startup code. This
means that the code from 1e7f583af67b ("random: make /dev/urandom scalable
for silly userspace programs") is not used when random.trust_cpu=1.

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314029] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$6 = (struct crng_state **) 0x0

After adding the missing call to numa_crng_init() the per-NUMA CRNGs are
initialized again:

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314031] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$1 = (struct crng_state **) 0xffff9a915f4014a0

The call to invalidate_batched_entropy() was also missing. This is
important for architectures like PPC and S390 which only have the
arch_get_random_seed_* functions.

Fixes: 39a8883a2b98 ("random: add a config option to trust the CPU's hwrng")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/random.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index c75b6cdf00533..a4515703cfcdd 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -778,6 +778,7 @@ static struct crng_state **crng_node_pool __read_mostly;
 #endif
 
 static void invalidate_batched_entropy(void);
+static void numa_crng_init(void);
 
 static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
 static int __init parse_trust_cpu(char *arg)
@@ -806,7 +807,9 @@ static void crng_initialize(struct crng_state *crng)
 		}
 		crng->state[i] ^= rv;
 	}
-	if (trust_cpu && arch_init) {
+	if (trust_cpu && arch_init && crng == &primary_crng) {
+		invalidate_batched_entropy();
+		numa_crng_init();
 		crng_init = 2;
 		pr_notice("random: crng done (trusting CPU's manufacturer)\n");
 	}
-- 
2.20.1

[PATCH 4.19 134/276] random: add a spinlock_t to struct batched_entropy

[Greg Kroah-Hartman]

[ Upstream commit b7d5dc21072cda7124d13eae2aefb7343ef94197 ]

The per-CPU variable batched_entropy_uXX is protected by get_cpu_var().
This is just a preempt_disable() which ensures that the variable is only
from the local CPU. It does not protect against users on the same CPU
from another context. It is possible that a preemptible context reads
slot 0 and then an interrupt occurs and the same value is read again.

The above scenario is confirmed by lockdep if we add a spinlock:
| ================================
| WARNING: inconsistent lock state
| 5.1.0-rc3+ #42 Not tainted
| --------------------------------
| inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
| ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes:
| (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0
| {SOFTIRQ-ON-W} state was registered at:
|   _raw_spin_lock+0x2a/0x40
|   get_random_u32+0x3e/0xe0
|   new_slab+0x15c/0x7b0
|   ___slab_alloc+0x492/0x620
|   __slab_alloc.isra.73+0x53/0xa0
|   kmem_cache_alloc_node+0xaf/0x2a0
|   copy_process.part.41+0x1e1/0x2370
|   _do_fork+0xdb/0x6d0
|   kernel_thread+0x20/0x30
|   kthreadd+0x1ba/0x220
|   ret_from_fork+0x3a/0x50
…
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|        CPU0
|        ----
|   lock(batched_entropy_u32.lock);
|   <Interrupt>
|     lock(batched_entropy_u32.lock);
|
|  *** DEADLOCK ***
|
| stack backtrace:
| Call Trace:
…
|  kmem_cache_alloc_trace+0x20e/0x270
|  ipmi_alloc_recv_msg+0x16/0x40
…
|  __do_softirq+0xec/0x48d
|  run_ksoftirqd+0x37/0x60
|  smpboot_thread_fn+0x191/0x290
|  kthread+0xfe/0x130
|  ret_from_fork+0x3a/0x50

Add a spinlock_t to the batched_entropy data structure and acquire the
lock while accessing it. Acquire the lock with disabled interrupts
because this function may be used from interrupt context.

Remove the batched_entropy_reset_lock lock. Now that we have a lock for
the data scructure, we can access it from a remote CPU.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/random.c | 52 ++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 25 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index a4515703cfcdd..0a84b7f468ad0 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -2215,8 +2215,8 @@ struct batched_entropy {
 		u32 entropy_u32[CHACHA20_BLOCK_SIZE / sizeof(u32)];
 	};
 	unsigned int position;
+	spinlock_t batch_lock;
 };
-static rwlock_t batched_entropy_reset_lock = __RW_LOCK_UNLOCKED(batched_entropy_reset_lock);
 
 /*
  * Get a random word for internal kernel use only. The quality of the random
@@ -2226,12 +2226,14 @@ static rwlock_t batched_entropy_reset_lock = __RW_LOCK_UNLOCKED(batched_entropy_
  * wait_for_random_bytes() should be called and return 0 at least once
  * at any point prior.
  */
-static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64);
+static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u64) = {
+	.batch_lock	= __SPIN_LOCK_UNLOCKED(batched_entropy_u64.lock),
+};
+
 u64 get_random_u64(void)
 {
 	u64 ret;
-	bool use_lock;
-	unsigned long flags = 0;
+	unsigned long flags;
 	struct batched_entropy *batch;
 	static void *previous;
 
@@ -2246,28 +2248,25 @@ u64 get_random_u64(void)
 
 	warn_unseeded_randomness(&previous);
 
-	use_lock = READ_ONCE(crng_init) < 2;
-	batch = &get_cpu_var(batched_entropy_u64);
-	if (use_lock)
-		read_lock_irqsave(&batched_entropy_reset_lock, flags);
+	batch = raw_cpu_ptr(&batched_entropy_u64);
+	spin_lock_irqsave(&batch->batch_lock, flags);
 	if (batch->position % ARRAY_SIZE(batch->entropy_u64) == 0) {
 		extract_crng((__u32 *)batch->entropy_u64);
 		batch->position = 0;
 	}
 	ret = batch->entropy_u64[batch->position++];
-	if (use_lock)
-		read_unlock_irqrestore(&batched_entropy_reset_lock, flags);
-	put_cpu_var(batched_entropy_u64);
+	spin_unlock_irqrestore(&batch->batch_lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_u64);
 
-static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u32);
+static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_u32) = {
+	.batch_lock	= __SPIN_LOCK_UNLOCKED(batched_entropy_u32.lock),
+};
 u32 get_random_u32(void)
 {
 	u32 ret;
-	bool use_lock;
-	unsigned long flags = 0;
+	unsigned long flags;
 	struct batched_entropy *batch;
 	static void *previous;
 
@@ -2276,18 +2275,14 @@ u32 get_random_u32(void)
 
 	warn_unseeded_randomness(&previous);
 
-	use_lock = READ_ONCE(crng_init) < 2;
-	batch = &get_cpu_var(batched_entropy_u32);
-	if (use_lock)
-		read_lock_irqsave(&batched_entropy_reset_lock, flags);
+	batch = raw_cpu_ptr(&batched_entropy_u32);
+	spin_lock_irqsave(&batch->batch_lock, flags);
 	if (batch->position % ARRAY_SIZE(batch->entropy_u32) == 0) {
 		extract_crng(batch->entropy_u32);
 		batch->position = 0;
 	}
 	ret = batch->entropy_u32[batch->position++];
-	if (use_lock)
-		read_unlock_irqrestore(&batched_entropy_reset_lock, flags);
-	put_cpu_var(batched_entropy_u32);
+	spin_unlock_irqrestore(&batch->batch_lock, flags);
 	return ret;
 }
 EXPORT_SYMBOL(get_random_u32);
@@ -2301,12 +2296,19 @@ static void invalidate_batched_entropy(void)
 	int cpu;
 	unsigned long flags;
 
-	write_lock_irqsave(&batched_entropy_reset_lock, flags);
 	for_each_possible_cpu (cpu) {
-		per_cpu_ptr(&batched_entropy_u32, cpu)->position = 0;
-		per_cpu_ptr(&batched_entropy_u64, cpu)->position = 0;
+		struct batched_entropy *batched_entropy;
+
+		batched_entropy = per_cpu_ptr(&batched_entropy_u32, cpu);
+		spin_lock_irqsave(&batched_entropy->batch_lock, flags);
+		batched_entropy->position = 0;
+		spin_unlock(&batched_entropy->batch_lock);
+
+		batched_entropy = per_cpu_ptr(&batched_entropy_u64, cpu);
+		spin_lock(&batched_entropy->batch_lock);
+		batched_entropy->position = 0;
+		spin_unlock_irqrestore(&batched_entropy->batch_lock, flags);
 	}
-	write_unlock_irqrestore(&batched_entropy_reset_lock, flags);
 }
 
 /**
-- 
2.20.1

[PATCH 4.19 135/276] cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock

[Greg Kroah-Hartman]

[ Upstream commit 4dcabece4c3a9f9522127be12cc12cc120399b2f ]

The number of descendant cgroups and the number of dying
descendant cgroups are currently synchronized using the cgroup_mutex.

The number of descendant cgroups will be required by the cgroup v2
freezer, which will use it to determine if a cgroup is frozen
(depending on total number of descendants and number of frozen
descendants). It's not always acceptable to grab the cgroup_mutex,
especially from quite hot paths (e.g. exit()).

To avoid this, let's additionally synchronize these counters using
the css_set_lock.

So, it's safe to read these counters with either cgroup_mutex or
css_set_lock locked, and for changing both locks should be acquired.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/cgroup-defs.h | 5 +++++
 kernel/cgroup/cgroup.c      | 6 ++++++
 2 files changed, 11 insertions(+)

diff --git a/include/linux/cgroup-defs.h b/include/linux/cgroup-defs.h
index 6002275937f55..a6090154b2ab7 100644
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -346,6 +346,11 @@ struct cgroup {
 	 * Dying cgroups are cgroups which were deleted by a user,
 	 * but are still existing because someone else is holding a reference.
 	 * max_descendants is a maximum allowed number of descent cgroups.
+	 *
+	 * nr_descendants and nr_dying_descendants are protected
+	 * by cgroup_mutex and css_set_lock. It's fine to read them holding
+	 * any of cgroup_mutex and css_set_lock; for writing both locks
+	 * should be held.
 	 */
 	int nr_descendants;
 	int nr_dying_descendants;
diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c
index 63dae7e0ccae7..81441117f6114 100644
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -4659,9 +4659,11 @@ static void css_release_work_fn(struct work_struct *work)
 		if (cgroup_on_dfl(cgrp))
 			cgroup_rstat_flush(cgrp);
 
+		spin_lock_irq(&css_set_lock);
 		for (tcgrp = cgroup_parent(cgrp); tcgrp;
 		     tcgrp = cgroup_parent(tcgrp))
 			tcgrp->nr_dying_descendants--;
+		spin_unlock_irq(&css_set_lock);
 
 		cgroup_idr_remove(&cgrp->root->cgroup_idr, cgrp->id);
 		cgrp->id = -1;
@@ -4874,12 +4876,14 @@ static struct cgroup *cgroup_create(struct cgroup *parent)
 	if (ret)
 		goto out_idr_free;
 
+	spin_lock_irq(&css_set_lock);
 	for (tcgrp = cgrp; tcgrp; tcgrp = cgroup_parent(tcgrp)) {
 		cgrp->ancestor_ids[tcgrp->level] = tcgrp->id;
 
 		if (tcgrp != cgrp)
 			tcgrp->nr_descendants++;
 	}
+	spin_unlock_irq(&css_set_lock);
 
 	if (notify_on_release(parent))
 		set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
@@ -5162,10 +5166,12 @@ static int cgroup_destroy_locked(struct cgroup *cgrp)
 	if (parent && cgroup_is_threaded(cgrp))
 		parent->nr_threaded_children--;
 
+	spin_lock_irq(&css_set_lock);
 	for (tcgrp = cgroup_parent(cgrp); tcgrp; tcgrp = cgroup_parent(tcgrp)) {
 		tcgrp->nr_descendants--;
 		tcgrp->nr_dying_descendants++;
 	}
+	spin_unlock_irq(&css_set_lock);
 
 	cgroup1_check_for_release(parent);
 
-- 
2.20.1

[PATCH 4.19 136/276] sched/core: Check quota and period overflow at usec to nsec conversion

[Greg Kroah-Hartman]

[ Upstream commit 1a8b4540db732ca16c9e43ac7c08b1b8f0b252d8 ]

Large values could overflow u64 and pass following sanity checks.

 # echo 18446744073750000 > cpu.cfs_period_us
 # cat cpu.cfs_period_us
 40448

 # echo 18446744073750000 > cpu.cfs_quota_us
 # cat cpu.cfs_quota_us
 40448

After this patch they will fail with -EINVAL.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d7f409866cdf5..bd5ae34c20c0b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6593,8 +6593,10 @@ int tg_set_cfs_quota(struct task_group *tg, long cfs_quota_us)
 	period = ktime_to_ns(tg->cfs_bandwidth.period);
 	if (cfs_quota_us < 0)
 		quota = RUNTIME_INF;
-	else
+	else if ((u64)cfs_quota_us <= U64_MAX / NSEC_PER_USEC)
 		quota = (u64)cfs_quota_us * NSEC_PER_USEC;
+	else
+		return -EINVAL;
 
 	return tg_set_cfs_bandwidth(tg, period, quota);
 }
@@ -6616,6 +6618,9 @@ int tg_set_cfs_period(struct task_group *tg, long cfs_period_us)
 {
 	u64 quota, period;
 
+	if ((u64)cfs_period_us > U64_MAX / NSEC_PER_USEC)
+		return -EINVAL;
+
 	period = (u64)cfs_period_us * NSEC_PER_USEC;
 	quota = tg->cfs_bandwidth.quota;
 
-- 
2.20.1

[PATCH 4.19 137/276] sched/rt: Check integer overflow at usec to nsec conversion

[Greg Kroah-Hartman]

[ Upstream commit 1a010e29cfa00fee2888fd2fd4983f848cbafb58 ]

Example of unhandled overflows:

 # echo 18446744073709651 > cpu.rt_runtime_us
 # cat cpu.rt_runtime_us
 99

 # echo 18446744073709900 > cpu.rt_period_us
 # cat cpu.rt_period_us
 348

After this patch they will fail with -EINVAL.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501739.293431.5252197504404771496.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/rt.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 2e2955a8cf8fe..b980cc96604fa 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -2559,6 +2559,8 @@ int sched_group_set_rt_runtime(struct task_group *tg, long rt_runtime_us)
 	rt_runtime = (u64)rt_runtime_us * NSEC_PER_USEC;
 	if (rt_runtime_us < 0)
 		rt_runtime = RUNTIME_INF;
+	else if ((u64)rt_runtime_us > U64_MAX / NSEC_PER_USEC)
+		return -EINVAL;
 
 	return tg_set_rt_bandwidth(tg, rt_period, rt_runtime);
 }
@@ -2579,6 +2581,9 @@ int sched_group_set_rt_period(struct task_group *tg, u64 rt_period_us)
 {
 	u64 rt_runtime, rt_period;
 
+	if (rt_period_us > U64_MAX / NSEC_PER_USEC)
+		return -EINVAL;
+
 	rt_period = rt_period_us * NSEC_PER_USEC;
 	rt_runtime = tg->rt_bandwidth.rt_runtime;
 
-- 
2.20.1

[PATCH 4.19 138/276] sched/core: Handle overflow in cpu_shares_write_u64

[Greg Kroah-Hartman]

[ Upstream commit 5b61d50ab4ef590f5e1d4df15cd2cea5f5715308 ]

Bit shift in scale_load() could overflow shares. This patch saturates
it to MAX_SHARES like following sched_group_set_shares().

Example:

 # echo 9223372036854776832 > cpu.shares
 # cat cpu.shares

Before patch: 1024
After pattch: 262144

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index bd5ae34c20c0b..6138754e5030f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6491,6 +6491,8 @@ static void cpu_cgroup_attach(struct cgroup_taskset *tset)
 static int cpu_shares_write_u64(struct cgroup_subsys_state *css,
 				struct cftype *cftype, u64 shareval)
 {
+	if (shareval > scale_load_down(ULONG_MAX))
+		shareval = MAX_SHARES;
 	return sched_group_set_shares(css_tg(css), scale_load(shareval));
 }
 
-- 
2.20.1

[PATCH 4.19 139/276] staging: vc04_services: handle kzalloc failure

[Greg Kroah-Hartman]

[ Upstream commit a5112277872a56017b777770e2fd4324d4a6c866 ]

The kzalloc here was being used without checking the return - if the
kzalloc fails return VCHIQ_ERROR. The call-site of
vchiq_platform_init_state() vchiq_init_state() was not responding
to an allocation failure so checks for != VCHIQ_SUCCESS
and pass VCHIQ_ERROR up to vchiq_platform_init() which then
will fail with -EINVAL.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-By: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c | 3 +++
 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
index e767209030642..c7c8ef67b67fa 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c
@@ -208,6 +208,9 @@ vchiq_platform_init_state(VCHIQ_STATE_T *state)
 	struct vchiq_2835_state *platform_state;
 
 	state->platform_state = kzalloc(sizeof(*platform_state), GFP_KERNEL);
+	if (!state->platform_state)
+		return VCHIQ_ERROR;
+
 	platform_state = (struct vchiq_2835_state *)state->platform_state;
 
 	platform_state->inited = 1;
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index 7642ced314364..63ce567eb6b75 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -2537,6 +2537,8 @@ vchiq_init_state(VCHIQ_STATE_T *state, VCHIQ_SLOT_ZERO_T *slot_zero,
 	local->debug[DEBUG_ENTRIES] = DEBUG_MAX;
 
 	status = vchiq_platform_init_state(state);
+	if (status != VCHIQ_SUCCESS)
+		return VCHIQ_ERROR;
 
 	/*
 		bring up slot handler thread
-- 
2.20.1

[PATCH 4.19 140/276] drm/msm: a5xx: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index ab1d9308c3114..ba6f3c14495c0 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -35,7 +35,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname)
 {
 	struct device *dev = &gpu->pdev->dev;
 	const struct firmware *fw;
-	struct device_node *np;
+	struct device_node *np, *mem_np;
 	struct resource r;
 	phys_addr_t mem_phys;
 	ssize_t mem_size;
@@ -49,11 +49,13 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname)
 	if (!np)
 		return -ENODEV;
 
-	np = of_parse_phandle(np, "memory-region", 0);
-	if (!np)
+	mem_np = of_parse_phandle(np, "memory-region", 0);
+	of_node_put(np);
+	if (!mem_np)
 		return -EINVAL;
 
-	ret = of_address_to_resource(np, 0, &r);
+	ret = of_address_to_resource(mem_np, 0, &r);
+	of_node_put(mem_np);
 	if (ret)
 		return ret;
 
-- 
2.20.1

[PATCH 4.19 141/276] irq_work: Do not raise an IPI when queueing work on the local CPU

[Greg Kroah-Hartman]

[ Upstream commit 471ba0e686cb13752bc1ff3216c54b69a2d250ea ]

The QEMU PowerPC/PSeries machine model was not expecting a self-IPI,
and it may be a bit surprising thing to do, so have irq_work_queue_on
do local queueing when target is the current CPU.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@kaod.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190409093403.20994-1-npiggin@gmail.com
[ Simplified the preprocessor comments.
  Fixed unbalanced curly brackets pointed out by Thomas. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/irq_work.c | 75 ++++++++++++++++++++++++++---------------------
 1 file changed, 42 insertions(+), 33 deletions(-)

diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index 6b7cdf17ccf89..73288914ed5e7 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -56,61 +56,70 @@ void __weak arch_irq_work_raise(void)
 	 */
 }
 
-/*
- * Enqueue the irq_work @work on @cpu unless it's already pending
- * somewhere.
- *
- * Can be re-enqueued while the callback is still in progress.
- */
-bool irq_work_queue_on(struct irq_work *work, int cpu)
+/* Enqueue on current CPU, work must already be claimed and preempt disabled */
+static void __irq_work_queue_local(struct irq_work *work)
 {
-	/* All work should have been flushed before going offline */
-	WARN_ON_ONCE(cpu_is_offline(cpu));
-
-#ifdef CONFIG_SMP
-
-	/* Arch remote IPI send/receive backend aren't NMI safe */
-	WARN_ON_ONCE(in_nmi());
+	/* If the work is "lazy", handle it from next tick if any */
+	if (work->flags & IRQ_WORK_LAZY) {
+		if (llist_add(&work->llnode, this_cpu_ptr(&lazy_list)) &&
+		    tick_nohz_tick_stopped())
+			arch_irq_work_raise();
+	} else {
+		if (llist_add(&work->llnode, this_cpu_ptr(&raised_list)))
+			arch_irq_work_raise();
+	}
+}
 
+/* Enqueue the irq work @work on the current CPU */
+bool irq_work_queue(struct irq_work *work)
+{
 	/* Only queue if not already pending */
 	if (!irq_work_claim(work))
 		return false;
 
-	if (llist_add(&work->llnode, &per_cpu(raised_list, cpu)))
-		arch_send_call_function_single_ipi(cpu);
-
-#else /* #ifdef CONFIG_SMP */
-	irq_work_queue(work);
-#endif /* #else #ifdef CONFIG_SMP */
+	/* Queue the entry and raise the IPI if needed. */
+	preempt_disable();
+	__irq_work_queue_local(work);
+	preempt_enable();
 
 	return true;
 }
+EXPORT_SYMBOL_GPL(irq_work_queue);
 
-/* Enqueue the irq work @work on the current CPU */
-bool irq_work_queue(struct irq_work *work)
+/*
+ * Enqueue the irq_work @work on @cpu unless it's already pending
+ * somewhere.
+ *
+ * Can be re-enqueued while the callback is still in progress.
+ */
+bool irq_work_queue_on(struct irq_work *work, int cpu)
 {
+#ifndef CONFIG_SMP
+	return irq_work_queue(work);
+
+#else /* CONFIG_SMP: */
+	/* All work should have been flushed before going offline */
+	WARN_ON_ONCE(cpu_is_offline(cpu));
+
 	/* Only queue if not already pending */
 	if (!irq_work_claim(work))
 		return false;
 
-	/* Queue the entry and raise the IPI if needed. */
 	preempt_disable();
-
-	/* If the work is "lazy", handle it from next tick if any */
-	if (work->flags & IRQ_WORK_LAZY) {
-		if (llist_add(&work->llnode, this_cpu_ptr(&lazy_list)) &&
-		    tick_nohz_tick_stopped())
-			arch_irq_work_raise();
+	if (cpu != smp_processor_id()) {
+		/* Arch remote IPI send/receive backend aren't NMI safe */
+		WARN_ON_ONCE(in_nmi());
+		if (llist_add(&work->llnode, &per_cpu(raised_list, cpu)))
+			arch_send_call_function_single_ipi(cpu);
 	} else {
-		if (llist_add(&work->llnode, this_cpu_ptr(&raised_list)))
-			arch_irq_work_raise();
+		__irq_work_queue_local(work);
 	}
-
 	preempt_enable();
 
 	return true;
+#endif /* CONFIG_SMP */
 }
-EXPORT_SYMBOL_GPL(irq_work_queue);
+
 
 bool irq_work_needs_cpu(void)
 {
-- 
2.20.1

[PATCH 4.19 142/276] thunderbolt: Take domain lock in switch sysfs attribute callbacks

[Greg Kroah-Hartman]

[ Upstream commit 09f11b6c99feaf86a26444bca85dc693b3f58f8b ]

switch_lock was introduced because it allowed serialization of device
authorization requests from userspace without need to take the big
domain lock (tb->lock). This was fine because device authorization with
ICM is just one command that is sent to the firmware. Now that we start
to handle all tunneling in the driver switch_lock is not enough because
we need to walk over the topology to establish paths.

For this reason drop switch_lock from the driver completely in favour of
big domain lock.

There is one complication, though. If userspace is waiting for the lock
in tb_switch_set_authorized(), it keeps the device_del() from removing
the sysfs attribute because it waits for active users to release the
attribute first which leads into following splat:

    INFO: task kworker/u8:3:73 blocked for more than 61 seconds.
          Tainted: G        W         5.1.0-rc1+ #244
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/u8:3    D12976    73      2 0x80000000
    Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
    Call Trace:
     ? __schedule+0x2e5/0x740
     ? _raw_spin_lock_irqsave+0x12/0x40
     ? prepare_to_wait_event+0xc5/0x160
     schedule+0x2d/0x80
     __kernfs_remove.part.17+0x183/0x1f0
     ? finish_wait+0x80/0x80
     kernfs_remove_by_name_ns+0x4a/0x90
     remove_files.isra.1+0x2b/0x60
     sysfs_remove_group+0x38/0x80
     sysfs_remove_groups+0x24/0x40
     device_remove_attrs+0x3d/0x70
     device_del+0x14c/0x360
     device_unregister+0x15/0x50
     tb_switch_remove+0x9e/0x1d0 [thunderbolt]
     tb_handle_hotplug+0x119/0x5a0 [thunderbolt]
     ? process_one_work+0x1b7/0x420
     process_one_work+0x1b7/0x420
     worker_thread+0x37/0x380
     ? _raw_spin_unlock_irqrestore+0xf/0x30
     ? process_one_work+0x420/0x420
     kthread+0x118/0x130
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x35/0x40

We deal this by following what network stack did for some of their
attributes and use mutex_trylock() with restart_syscall(). This makes
userspace release the attribute allowing sysfs attribute removal to
progress before the write is restarted and eventually fail when the
attribute is removed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/switch.c | 45 +++++++++++++++---------------------
 drivers/thunderbolt/tb.h     |  3 +--
 2 files changed, 20 insertions(+), 28 deletions(-)

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index dd9ae6f5d19ce..ed572c82a91be 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -9,15 +9,13 @@
 #include <linux/idr.h>
 #include <linux/nvmem-provider.h>
 #include <linux/pm_runtime.h>
+#include <linux/sched/signal.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 
 #include "tb.h"
 
-/* Switch authorization from userspace is serialized by this lock */
-static DEFINE_MUTEX(switch_lock);
-
 /* Switch NVM support */
 
 #define NVM_DEVID		0x05
@@ -253,8 +251,8 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
 	struct tb_switch *sw = priv;
 	int ret = 0;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	/*
 	 * Since writing the NVM image might require some special steps,
@@ -274,7 +272,7 @@ static int tb_switch_nvm_write(void *priv, unsigned int offset, void *val,
 	memcpy(sw->nvm->buf + offset, val, bytes);
 
 unlock:
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 
 	return ret;
 }
@@ -363,10 +361,7 @@ static int tb_switch_nvm_add(struct tb_switch *sw)
 	}
 	nvm->non_active = nvm_dev;
 
-	mutex_lock(&switch_lock);
 	sw->nvm = nvm;
-	mutex_unlock(&switch_lock);
-
 	return 0;
 
 err_nvm_active:
@@ -383,10 +378,8 @@ static void tb_switch_nvm_remove(struct tb_switch *sw)
 {
 	struct tb_switch_nvm *nvm;
 
-	mutex_lock(&switch_lock);
 	nvm = sw->nvm;
 	sw->nvm = NULL;
-	mutex_unlock(&switch_lock);
 
 	if (!nvm)
 		return;
@@ -717,8 +710,8 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
 {
 	int ret = -EINVAL;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	if (sw->authorized)
 		goto unlock;
@@ -761,7 +754,7 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
 	}
 
 unlock:
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 	return ret;
 }
 
@@ -818,15 +811,15 @@ static ssize_t key_show(struct device *dev, struct device_attribute *attr,
 	struct tb_switch *sw = tb_to_switch(dev);
 	ssize_t ret;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	if (sw->key)
 		ret = sprintf(buf, "%*phN\n", TB_SWITCH_KEY_SIZE, sw->key);
 	else
 		ret = sprintf(buf, "\n");
 
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 	return ret;
 }
 
@@ -843,8 +836,8 @@ static ssize_t key_store(struct device *dev, struct device_attribute *attr,
 	else if (hex2bin(key, buf, sizeof(key)))
 		return -EINVAL;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	if (sw->authorized) {
 		ret = -EBUSY;
@@ -859,7 +852,7 @@ static ssize_t key_store(struct device *dev, struct device_attribute *attr,
 		}
 	}
 
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 	return ret;
 }
 static DEVICE_ATTR(key, 0600, key_show, key_store);
@@ -905,8 +898,8 @@ static ssize_t nvm_authenticate_store(struct device *dev,
 	bool val;
 	int ret;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	/* If NVMem devices are not yet added */
 	if (!sw->nvm) {
@@ -954,7 +947,7 @@ static ssize_t nvm_authenticate_store(struct device *dev,
 	}
 
 exit_unlock:
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 
 	if (ret)
 		return ret;
@@ -968,8 +961,8 @@ static ssize_t nvm_version_show(struct device *dev,
 	struct tb_switch *sw = tb_to_switch(dev);
 	int ret;
 
-	if (mutex_lock_interruptible(&switch_lock))
-		return -ERESTARTSYS;
+	if (!mutex_trylock(&sw->tb->lock))
+		return restart_syscall();
 
 	if (sw->safe_mode)
 		ret = -ENODATA;
@@ -978,7 +971,7 @@ static ssize_t nvm_version_show(struct device *dev,
 	else
 		ret = sprintf(buf, "%x.%x\n", sw->nvm->major, sw->nvm->minor);
 
-	mutex_unlock(&switch_lock);
+	mutex_unlock(&sw->tb->lock);
 
 	return ret;
 }
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 5067d69d05018..7a0ee9836a8a7 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -79,8 +79,7 @@ struct tb_switch_nvm {
  * @depth: Depth in the chain this switch is connected (ICM only)
  *
  * When the switch is being added or removed to the domain (other
- * switches) you need to have domain lock held. For switch authorization
- * internal switch_lock is enough.
+ * switches) you need to have domain lock held.
  */
 struct tb_switch {
 	struct device dev;
-- 
2.20.1

[PATCH 4.19 143/276] s390/qeth: handle error from qeth_update_from_chp_desc()

[Greg Kroah-Hartman]

[ Upstream commit a4cdc9baee0740748f16e50cd70c2607510df492 ]

Subsequent code relies on the values that qeth_update_from_chp_desc()
reads from the CHP descriptor. Rather than dealing with weird errors
later on, just handle it properly here.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core_main.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 56aacf32f71b0..461afc276db72 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1370,7 +1370,7 @@ static void qeth_set_multiple_write_queues(struct qeth_card *card)
 	card->qdio.no_out_queues = 4;
 }
 
-static void qeth_update_from_chp_desc(struct qeth_card *card)
+static int qeth_update_from_chp_desc(struct qeth_card *card)
 {
 	struct ccw_device *ccwdev;
 	struct channel_path_desc_fmt0 *chp_dsc;
@@ -1380,7 +1380,7 @@ static void qeth_update_from_chp_desc(struct qeth_card *card)
 	ccwdev = card->data.ccwdev;
 	chp_dsc = ccw_device_get_chp_desc(ccwdev, 0);
 	if (!chp_dsc)
-		goto out;
+		return -ENOMEM;
 
 	card->info.func_level = 0x4100 + chp_dsc->desc;
 	if (card->info.type == QETH_CARD_TYPE_IQD)
@@ -1395,6 +1395,7 @@ static void qeth_update_from_chp_desc(struct qeth_card *card)
 	kfree(chp_dsc);
 	QETH_DBF_TEXT_(SETUP, 2, "nr:%x", card->qdio.no_out_queues);
 	QETH_DBF_TEXT_(SETUP, 2, "lvl:%02x", card->info.func_level);
+	return 0;
 }
 
 static void qeth_init_qdio_info(struct qeth_card *card)
@@ -5090,7 +5091,9 @@ int qeth_core_hardsetup_card(struct qeth_card *card)
 
 	QETH_DBF_TEXT(SETUP, 2, "hrdsetup");
 	atomic_set(&card->force_alloc_skb, 0);
-	qeth_update_from_chp_desc(card);
+	rc = qeth_update_from_chp_desc(card);
+	if (rc)
+		return rc;
 retry:
 	if (retries < 3)
 		QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n",
@@ -5768,7 +5771,9 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev)
 	gdev->cdev[2]->handler = qeth_irq;
 
 	qeth_setup_card(card);
-	qeth_update_from_chp_desc(card);
+	rc = qeth_update_from_chp_desc(card);
+	if (rc)
+		goto err_chp_desc;
 
 	card->dev = qeth_alloc_netdev(card);
 	if (!card->dev) {
@@ -5806,6 +5811,7 @@ static int qeth_core_probe_device(struct ccwgroup_device *gdev)
 	qeth_core_free_discipline(card);
 err_load:
 	free_netdev(card->dev);
+err_chp_desc:
 err_card:
 	qeth_core_free_card(card);
 err_dev:
-- 
2.20.1

[PATCH 4.19 144/276] USB: core: Dont unbind interfaces following device reset failure

[Greg Kroah-Hartman]

[ Upstream commit 381419fa720060ba48b7bbc483be787d5b1dca6f ]

The SCSI core does not like to have devices or hosts unregistered
while error recovery is in progress.  Trying to do so can lead to
self-deadlock: Part of the removal code tries to obtain a lock already
held by the error handler.

This can cause problems for the usb-storage and uas drivers, because
their error handler routines perform a USB reset, and if the reset
fails then the USB core automatically goes on to unbind all drivers
from the device's interfaces -- all while still in the context of the
SCSI error handler.

As it turns out, practically all the scenarios leading to a USB reset
failure end up causing a device disconnect (the main error pathway in
usb_reset_and_verify_device(), at the end of the routine, calls
hub_port_logical_disconnect() before returning).  As a result, the
hub_wq thread will soon become aware of the problem and will unbind
all the device's drivers in its own context, not in the
error-handler's context.

This means that usb_reset_device() does not need to call
usb_unbind_and_rebind_marked_interfaces() in cases where
usb_reset_and_verify_device() has returned an error, because hub_wq
will take care of everything anyway.

This particular problem was observed in somewhat artificial
circumstances, by using usbfs to tell a hub to power-down a port
connected to a USB-3 mass storage device using the UAS protocol.  With
the port turned off, the currently executing command timed out and the
error handler started running.  The USB reset naturally failed,
because the hub port was off, and the error handler deadlocked as
described above.  Not carrying out the call to
usb_unbind_and_rebind_marked_interfaces() fixes this issue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
Tested-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
CC: Bart Van Assche <bvanassche@acm.org>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: Jacky Cao <Jacky.Cao@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/hub.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index bbcfa63d0233b..eb24ec0e160d4 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5823,7 +5823,10 @@ int usb_reset_device(struct usb_device *udev)
 					cintf->needs_binding = 1;
 			}
 		}
-		usb_unbind_and_rebind_marked_interfaces(udev);
+
+		/* If the reset failed, hub_wq will unbind drivers later */
+		if (ret == 0)
+			usb_unbind_and_rebind_marked_interfaces(udev);
 	}
 
 	usb_autosuspend_device(udev);
-- 
2.20.1

[PATCH 4.19 145/276] x86/irq/64: Limit IST stack overflow check to #DB stack

[Greg Kroah-Hartman]

[ Upstream commit 7dbcf2b0b770eeb803a416ee8dcbef78e6389d40 ]

Commit

  37fe6a42b343 ("x86: Check stack overflow in detail")

added a broad check for the full exception stack area, i.e. it considers
the full exception stack area as valid.

That's wrong in two aspects:

 1) It does not check the individual areas one by one

 2) #DF, NMI and #MCE are not enabling interrupts which means that a
    regular device interrupt cannot happen in their context. In fact if a
    device interrupt hits one of those IST stacks that's a bug because some
    code path enabled interrupts while handling the exception.

Limit the check to the #DB stack and consider all other IST stacks as
'overflow' or invalid.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190414160143.682135110@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/irq_64.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 0469cd078db15..b50ac9c7397bb 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -26,9 +26,18 @@ int sysctl_panic_on_stackoverflow;
 /*
  * Probabilistic stack overflow check:
  *
- * Only check the stack in process context, because everything else
- * runs on the big interrupt stacks. Checking reliably is too expensive,
- * so we just check from interrupts.
+ * Regular device interrupts can enter on the following stacks:
+ *
+ * - User stack
+ *
+ * - Kernel task stack
+ *
+ * - Interrupt stack if a device driver reenables interrupts
+ *   which should only happen in really old drivers.
+ *
+ * - Debug IST stack
+ *
+ * All other contexts are invalid.
  */
 static inline void stack_overflow_check(struct pt_regs *regs)
 {
@@ -53,8 +62,8 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 		return;
 
 	oist = this_cpu_ptr(&orig_ist);
-	estack_top = (u64)oist->ist[0] - EXCEPTION_STKSZ + STACK_TOP_MARGIN;
-	estack_bottom = (u64)oist->ist[N_EXCEPTION_STACKS - 1];
+	estack_bottom = (u64)oist->ist[DEBUG_STACK];
+	estack_top = estack_bottom - DEBUG_STKSZ + STACK_TOP_MARGIN;
 	if (regs->sp >= estack_top && regs->sp <= estack_bottom)
 		return;
 
-- 
2.20.1

[PATCH 4.19 146/276] drm: etnaviv: avoid DMA API warning when importing buffers

[Greg Kroah-Hartman]

[ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ]

During boot, I get this kernel warning:

WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc
etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536]
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000
caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables
CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14)
[<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4)
[<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124)
[<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc)
[<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c)
[<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c)
[<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104)
[<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c)
[<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c)
[<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8)
[<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0)
[<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48)
[<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60)
[<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd81a9fa8 to 0xd81a9ff0)
9fa0:                   b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600
9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8
9fe0: b6989f18 bec613dc b697185c b667be5c
irq event stamp: 47905
hardirqs last  enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680
hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680
softirqs last  enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540
softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144
---[ end trace af477747acbcc642 ]---

The reason is the contiguous buffer exceeds the default maximum segment
size of 64K as specified by dma_get_max_seg_size() in
linux/dma-mapping.h.  Fix this by providing our own segment size, which
is set to 2GiB to cover the window found in MMUv1 GPUs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/etnaviv/etnaviv_drv.c | 5 +++++
 drivers/gpu/drm/etnaviv/etnaviv_drv.h | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
index 83c1f46670bfe..00675fcbffa2d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
@@ -527,6 +527,9 @@ static int etnaviv_bind(struct device *dev)
 	}
 	drm->dev_private = priv;
 
+	dev->dma_parms = &priv->dma_parms;
+	dma_set_max_seg_size(dev, SZ_2G);
+
 	mutex_init(&priv->gem_lock);
 	INIT_LIST_HEAD(&priv->gem_list);
 	priv->num_gpus = 0;
@@ -564,6 +567,8 @@ static void etnaviv_unbind(struct device *dev)
 
 	component_unbind_all(dev, drm);
 
+	dev->dma_parms = NULL;
+
 	drm->dev_private = NULL;
 	kfree(priv);
 
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.h b/drivers/gpu/drm/etnaviv/etnaviv_drv.h
index 8d02d1b7dcf5a..b2930d1fe97c0 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_drv.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.h
@@ -43,6 +43,7 @@ struct etnaviv_file_private {
 
 struct etnaviv_drm_private {
 	int num_gpus;
+	struct device_dma_parameters dma_parms;
 	struct etnaviv_gpu *gpu[ETNA_MAX_PIPES];
 
 	/* list of GEM objects: */
-- 
2.20.1

[PATCH 4.19 147/276] phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

[Greg Kroah-Hartman]

[ Upstream commit e6f32efb1b128344a2c7df9875bc1a1abaa1d395 ]

On platforms where the MUSB and HCI controllers share PHY0, PHY passby
is required when using the HCI controller with the PHY, but it must be
disabled when the MUSB controller is used instead.

Without this, PHY0 passby is always enabled, which results in broken
peripheral mode on such platforms (e.g. H3/H5).

Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/allwinner/phy-sun4i-usb.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 15c8fc2abf01f..1f8809bab002c 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -550,6 +550,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	struct sun4i_usb_phy_data *data =
 		container_of(work, struct sun4i_usb_phy_data, detect.work);
 	struct phy *phy0 = data->phys[0].phy;
+	struct sun4i_usb_phy *phy = phy_get_drvdata(phy0);
 	bool force_session_end, id_notify = false, vbus_notify = false;
 	int id_det, vbus_det;
 
@@ -606,6 +607,9 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 			mutex_unlock(&phy0->mutex);
 		}
 
+		/* Enable PHY0 passby for host mode only. */
+		sun4i_usb_phy_passby(phy, !id_det);
+
 		/* Re-route PHY0 if necessary */
 		if (data->cfg->phy0_dual_route)
 			sun4i_usb_phy0_reroute(data, id_det);
-- 
2.20.1

[PATCH 4.19 148/276] phy: mapphone-mdm6600: add gpiolib dependency

[Greg Kroah-Hartman]

[ Upstream commit 208d3423ee463ab257908456f6bbca4024ab63f7 ]

gcc points out that when CONFIG_GPIOLIB is disabled,
gpiod_get_array_value_cansleep() returns 0 but fails to set its output:

drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status':
drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized]

This could be fixed more generally in gpiolib by returning a failure
code, but for this specific case, the easier workaround is to add a
gpiolib dependency.

Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/motorola/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/motorola/Kconfig b/drivers/phy/motorola/Kconfig
index 82651524ffb9c..718f8729701df 100644
--- a/drivers/phy/motorola/Kconfig
+++ b/drivers/phy/motorola/Kconfig
@@ -13,7 +13,7 @@ config PHY_CPCAP_USB
 
 config PHY_MAPPHONE_MDM6600
 	tristate "Motorola Mapphone MDM6600 modem USB PHY driver"
-	depends on OF && USB_SUPPORT
+	depends on OF && USB_SUPPORT && GPIOLIB
 	select GENERIC_PHY
 	help
 	  Enable this for MDM6600 USB modem to work on Motorola phones
-- 
2.20.1

[PATCH 4.19 149/276] i40e: Able to add up to 16 MAC filters on an untrusted VF

[Greg Kroah-Hartman]

[ Upstream commit 06b6e2a2333eb3581567a7ac43ca465ef45f4daa ]

This patch fixes the problem with the driver being able to add only 7
multicast MAC address filters instead of 16. The problem is fixed by
changing the maximum number of MAC address filters to 16+1+1 (two extra
are needed because the driver uses 1 for unicast MAC address and 1 for
broadcast).

Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index c6d24eaede184..d86f3fa7aa6a4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2399,8 +2399,10 @@ static int i40e_vc_get_stats_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 				      (u8 *)&stats, sizeof(stats));
 }
 
-/* If the VF is not trusted restrict the number of MAC/VLAN it can program */
-#define I40E_VC_MAX_MAC_ADDR_PER_VF 12
+/* If the VF is not trusted restrict the number of MAC/VLAN it can program
+ * MAC filters: 16 for multicast, 1 for MAC, 1 for broadcast
+ */
+#define I40E_VC_MAX_MAC_ADDR_PER_VF (16 + 1 + 1)
 #define I40E_VC_MAX_VLAN_PER_VF 8
 
 /**
-- 
2.20.1

[PATCH 4.19 150/276] i40e: dont allow changes to HW VLAN stripping on active port VLANs

[Greg Kroah-Hartman]

[ Upstream commit bfb0ebed53857cfc57f11c63fa3689940d71c1c8 ]

Modifying the VLAN stripping options when a port VLAN is configured
will break traffic for the VSI, and conceptually doesn't make sense,
so don't allow this.

Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index f81ad0aa8b095..df8808cd7e114 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2654,6 +2654,10 @@ void i40e_vlan_stripping_enable(struct i40e_vsi *vsi)
 	struct i40e_vsi_context ctxt;
 	i40e_status ret;
 
+	/* Don't modify stripping options if a port VLAN is active */
+	if (vsi->info.pvid)
+		return;
+
 	if ((vsi->info.valid_sections &
 	     cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
 	    ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0))
@@ -2684,6 +2688,10 @@ void i40e_vlan_stripping_disable(struct i40e_vsi *vsi)
 	struct i40e_vsi_context ctxt;
 	i40e_status ret;
 
+	/* Don't modify stripping options if a port VLAN is active */
+	if (vsi->info.pvid)
+		return;
+
 	if ((vsi->info.valid_sections &
 	     cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) &&
 	    ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_EMOD_MASK) ==
-- 
2.20.1

[PATCH 4.19 151/276] ACPI/IORT: Reject platform device creation on NUMA node mapping failure

[Greg Kroah-Hartman]

[ Upstream commit 36a2ba07757df790b4a874efb1a105b9330a9ae7 ]

In a system where, through IORT firmware mappings, the SMMU device is
mapped to a NUMA node that is not online, the kernel bootstrap results
in the following crash:

  Unable to handle kernel paging request at virtual address 0000000000001388
  Mem abort info:
    ESR = 0x96000004
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000001388] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] SMP
  Modules linked in:
  CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15
  pstate: 80c00009 (Nzcv daif +PAN +UAO)
  pc : __alloc_pages_nodemask+0x13c/0x1068
  lr : __alloc_pages_nodemask+0xdc/0x1068
  ...
  Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
  Call trace:
   __alloc_pages_nodemask+0x13c/0x1068
   new_slab+0xec/0x570
   ___slab_alloc+0x3e0/0x4f8
   __slab_alloc+0x60/0x80
   __kmalloc_node_track_caller+0x10c/0x478
   devm_kmalloc+0x44/0xb0
   pinctrl_bind_pins+0x4c/0x188
   really_probe+0x78/0x2b8
   driver_probe_device+0x64/0x110
   device_driver_attach+0x74/0x98
   __driver_attach+0x9c/0xe8
   bus_for_each_dev+0x84/0xd8
   driver_attach+0x30/0x40
   bus_add_driver+0x170/0x218
   driver_register+0x64/0x118
   __platform_driver_register+0x54/0x60
   arm_smmu_driver_init+0x24/0x2c
   do_one_initcall+0xbc/0x328
   kernel_init_freeable+0x304/0x3ac
   kernel_init+0x18/0x110
   ret_from_fork+0x10/0x1c
  Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804)
  ---[ end trace dfeaed4c373a32da ]--

Change the dev_set_proximity() hook prototype so that it returns a
value and make it return failure if the PXM->NUMA-node mapping
corresponds to an offline node, fixing the crash.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/arm64/iort.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index e48eebc27b81b..43c2615434b48 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -1231,18 +1231,24 @@ static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
 /*
  * set numa proximity domain for smmuv3 device
  */
-static void  __init arm_smmu_v3_set_proximity(struct device *dev,
+static int  __init arm_smmu_v3_set_proximity(struct device *dev,
 					      struct acpi_iort_node *node)
 {
 	struct acpi_iort_smmu_v3 *smmu;
 
 	smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
 	if (smmu->flags & ACPI_IORT_SMMU_V3_PXM_VALID) {
-		set_dev_node(dev, acpi_map_pxm_to_node(smmu->pxm));
+		int node = acpi_map_pxm_to_node(smmu->pxm);
+
+		if (node != NUMA_NO_NODE && !node_online(node))
+			return -EINVAL;
+
+		set_dev_node(dev, node);
 		pr_info("SMMU-v3[%llx] Mapped to Proximity domain %d\n",
 			smmu->base_address,
 			smmu->pxm);
 	}
+	return 0;
 }
 #else
 #define arm_smmu_v3_set_proximity NULL
@@ -1317,7 +1323,7 @@ struct iort_dev_config {
 	int (*dev_count_resources)(struct acpi_iort_node *node);
 	void (*dev_init_resources)(struct resource *res,
 				     struct acpi_iort_node *node);
-	void (*dev_set_proximity)(struct device *dev,
+	int (*dev_set_proximity)(struct device *dev,
 				    struct acpi_iort_node *node);
 };
 
@@ -1368,8 +1374,11 @@ static int __init iort_add_platform_device(struct acpi_iort_node *node,
 	if (!pdev)
 		return -ENOMEM;
 
-	if (ops->dev_set_proximity)
-		ops->dev_set_proximity(&pdev->dev, node);
+	if (ops->dev_set_proximity) {
+		ret = ops->dev_set_proximity(&pdev->dev, node);
+		if (ret)
+			goto dev_put;
+	}
 
 	count = ops->dev_count_resources(node);
 
-- 
2.20.1

[PATCH 4.19 152/276] arm64: vdso: Fix clock_getres() for CLOCK_REALTIME

[Greg Kroah-Hartman]

[ Upstream commit 81fb8736dd81da3fe94f28968dac60f392ec6746 ]

clock_getres() in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().

In particular, posix_get_hrtimer_res() does:

    sec = 0;
    ns = hrtimer_resolution;

where 'hrtimer_resolution' depends on whether or not high resolution
timers are enabled, which is a runtime decision.

The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this
by exposing 'hrtimer_resolution' in the vDSO datapage and returning that
instead.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/vdso_datapage.h | 1 +
 arch/arm64/kernel/asm-offsets.c        | 2 +-
 arch/arm64/kernel/vdso.c               | 3 +++
 arch/arm64/kernel/vdso/gettimeofday.S  | 7 +++----
 4 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/include/asm/vdso_datapage.h b/arch/arm64/include/asm/vdso_datapage.h
index 2b9a63771eda8..f89263c8e11af 100644
--- a/arch/arm64/include/asm/vdso_datapage.h
+++ b/arch/arm64/include/asm/vdso_datapage.h
@@ -38,6 +38,7 @@ struct vdso_data {
 	__u32 tz_minuteswest;	/* Whacky timezone stuff */
 	__u32 tz_dsttime;
 	__u32 use_syscall;
+	__u32 hrtimer_res;
 };
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 323aeb5f2fe62..92fba851ce53a 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -99,7 +99,7 @@ int main(void)
   DEFINE(CLOCK_REALTIME,	CLOCK_REALTIME);
   DEFINE(CLOCK_MONOTONIC,	CLOCK_MONOTONIC);
   DEFINE(CLOCK_MONOTONIC_RAW,	CLOCK_MONOTONIC_RAW);
-  DEFINE(CLOCK_REALTIME_RES,	MONOTONIC_RES_NSEC);
+  DEFINE(CLOCK_REALTIME_RES,	offsetof(struct vdso_data, hrtimer_res));
   DEFINE(CLOCK_REALTIME_COARSE,	CLOCK_REALTIME_COARSE);
   DEFINE(CLOCK_MONOTONIC_COARSE,CLOCK_MONOTONIC_COARSE);
   DEFINE(CLOCK_COARSE_RES,	LOW_RES_NSEC);
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 2d419006ad433..ec0bb588d7553 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -232,6 +232,9 @@ void update_vsyscall(struct timekeeper *tk)
 	vdso_data->wtm_clock_sec		= tk->wall_to_monotonic.tv_sec;
 	vdso_data->wtm_clock_nsec		= tk->wall_to_monotonic.tv_nsec;
 
+	/* Read without the seqlock held by clock_getres() */
+	WRITE_ONCE(vdso_data->hrtimer_res, hrtimer_resolution);
+
 	if (!use_syscall) {
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S
index e8f60112818fc..856fee6d35129 100644
--- a/arch/arm64/kernel/vdso/gettimeofday.S
+++ b/arch/arm64/kernel/vdso/gettimeofday.S
@@ -308,13 +308,14 @@ ENTRY(__kernel_clock_getres)
 	ccmp	w0, #CLOCK_MONOTONIC_RAW, #0x4, ne
 	b.ne	1f
 
-	ldr	x2, 5f
+	adr	vdso_data, _vdso_data
+	ldr	w2, [vdso_data, #CLOCK_REALTIME_RES]
 	b	2f
 1:
 	cmp	w0, #CLOCK_REALTIME_COARSE
 	ccmp	w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
 	b.ne	4f
-	ldr	x2, 6f
+	ldr	x2, 5f
 2:
 	cbz	x1, 3f
 	stp	xzr, x2, [x1]
@@ -328,8 +329,6 @@ ENTRY(__kernel_clock_getres)
 	svc	#0
 	ret
 5:
-	.quad	CLOCK_REALTIME_RES
-6:
 	.quad	CLOCK_COARSE_RES
 	.cfi_endproc
 ENDPROC(__kernel_clock_getres)
-- 
2.20.1

[PATCH 4.19 153/276] RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure

[Greg Kroah-Hartman]

[ Upstream commit a6d2a5a92e67d151c98886babdc86d530d27111c ]

Currently if alloc_skb fails to allocate the skb a null skb is passed to
t4_set_arp_err_handler and this ends up dereferencing the null skb.  Avoid
the NULL pointer dereference by checking for a NULL skb and returning
early.

Addresses-Coverity: ("Dereference null return")
Fixes: b38a0ad8ec11 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/cm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index a68569ec86bf9..3be6405d9855e 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -458,6 +458,8 @@ static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp)
 		skb_reset_transport_header(skb);
 	} else {
 		skb = alloc_skb(len, gfp);
+		if (!skb)
+			return NULL;
 	}
 	t4_set_arp_err_handler(skb, NULL, NULL);
 	return skb;
-- 
2.20.1

[PATCH 4.19 154/276] perf/x86/msr: Add Icelake support

[Greg Kroah-Hartman]

[ Upstream commit cf50d79a8cfe5adae37fec026220b009559bbeed ]

Icelake is the same as the existing Skylake parts.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-12-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/msr.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/msr.c b/arch/x86/events/msr.c
index 1b9f85abf9bc1..ace6c1e752fb1 100644
--- a/arch/x86/events/msr.c
+++ b/arch/x86/events/msr.c
@@ -89,6 +89,7 @@ static bool test_intel(int idx)
 	case INTEL_FAM6_SKYLAKE_X:
 	case INTEL_FAM6_KABYLAKE_MOBILE:
 	case INTEL_FAM6_KABYLAKE_DESKTOP:
+	case INTEL_FAM6_ICELAKE_MOBILE:
 		if (idx == PERF_MSR_SMI || idx == PERF_MSR_PPERF)
 			return true;
 		break;
-- 
2.20.1

[PATCH 4.19 155/276] perf/x86/intel/rapl: Add Icelake support

[Greg Kroah-Hartman]

[ Upstream commit b3377c3acb9e54cf86efcfe25f2e792bca599ed4 ]

Icelake support the same RAPL counters as Skylake.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-11-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/rapl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c
index 91039ffed6333..2413169ce3627 100644
--- a/arch/x86/events/intel/rapl.c
+++ b/arch/x86/events/intel/rapl.c
@@ -780,6 +780,8 @@ static const struct x86_cpu_id rapl_cpu_match[] __initconst = {
 	X86_RAPL_MODEL_MATCH(INTEL_FAM6_ATOM_GOLDMONT_X, hsw_rapl_init),
 
 	X86_RAPL_MODEL_MATCH(INTEL_FAM6_ATOM_GOLDMONT_PLUS, hsw_rapl_init),
+
+	X86_RAPL_MODEL_MATCH(INTEL_FAM6_ICELAKE_MOBILE,  skl_rapl_init),
 	{},
 };
 
-- 
2.20.1

[PATCH 4.19 156/276] perf/x86/intel/cstate: Add Icelake support

[Greg Kroah-Hartman]

[ Upstream commit f08c47d1f86c6dc666c7e659d94bf6d4492aa9d7 ]

Icelake uses the same C-state residency events as Sandy Bridge.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-10-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/cstate.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c
index 56194c571299f..4a650eb3d94a3 100644
--- a/arch/x86/events/intel/cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -584,6 +584,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_GOLDMONT_X, glm_cstates),
 
 	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_GOLDMONT_PLUS, glm_cstates),
+
+	X86_CSTATES_MODEL(INTEL_FAM6_ICELAKE_MOBILE, snb_cstates),
 	{ },
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_cstates_match);
-- 
2.20.1

[PATCH 4.19 157/276] hwmon: (vt1211) Use request_muxed_region for Super-IO accesses

[Greg Kroah-Hartman]

[ Upstream commit 14b97ba5c20056102b3dd22696bf17b057e60976 ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: 2219cd81a6cd ("hwmon/vt1211: Add probing of alternate config index port")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/vt1211.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index 3a6bfa51cb94f..95d5e8ec8b7fc 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -226,15 +226,21 @@ static inline void superio_select(int sio_cip, int ldn)
 	outb(ldn, sio_cip + 1);
 }
 
-static inline void superio_enter(int sio_cip)
+static inline int superio_enter(int sio_cip)
 {
+	if (!request_muxed_region(sio_cip, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, sio_cip);
 	outb(0x87, sio_cip);
+
+	return 0;
 }
 
 static inline void superio_exit(int sio_cip)
 {
 	outb(0xaa, sio_cip);
+	release_region(sio_cip, 2);
 }
 
 /* ---------------------------------------------------------------------
@@ -1282,11 +1288,14 @@ static int __init vt1211_device_add(unsigned short address)
 
 static int __init vt1211_find(int sio_cip, unsigned short *address)
 {
-	int err = -ENODEV;
+	int err;
 	int devid;
 
-	superio_enter(sio_cip);
+	err = superio_enter(sio_cip);
+	if (err)
+		return err;
 
+	err = -ENODEV;
 	devid = force_id ? force_id : superio_inb(sio_cip, SIO_VT1211_DEVID);
 	if (devid != SIO_VT1211_ID)
 		goto EXIT;
-- 
2.20.1

[PATCH 4.19 158/276] hwmon: (smsc47m1) Use request_muxed_region for Super-IO accesses

[Greg Kroah-Hartman]

[ Upstream commit d6410408ad2a798c4cc685252c1baa713be0ad69 ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)")
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: John Garry <john.garry@huawei.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/smsc47m1.c | 28 +++++++++++++++++++---------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index c7b6a425e2c02..5eeac9853d0ae 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -73,16 +73,21 @@ superio_inb(int reg)
 /* logical device for fans is 0x0A */
 #define superio_select() superio_outb(0x07, 0x0A)
 
-static inline void
+static inline int
 superio_enter(void)
 {
+	if (!request_muxed_region(REG, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x55, REG);
+	return 0;
 }
 
 static inline void
 superio_exit(void)
 {
 	outb(0xAA, REG);
+	release_region(REG, 2);
 }
 
 #define SUPERIO_REG_ACT		0x30
@@ -531,8 +536,12 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data)
 {
 	u8 val;
 	unsigned short addr;
+	int err;
+
+	err = superio_enter();
+	if (err)
+		return err;
 
-	superio_enter();
 	val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 
 	/*
@@ -608,13 +617,14 @@ static int __init smsc47m1_find(struct smsc47m1_sio_data *sio_data)
 static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
 {
 	if ((sio_data->activate & 0x01) == 0) {
-		superio_enter();
-		superio_select();
-
-		pr_info("Disabling device\n");
-		superio_outb(SUPERIO_REG_ACT, sio_data->activate);
-
-		superio_exit();
+		if (!superio_enter()) {
+			superio_select();
+			pr_info("Disabling device\n");
+			superio_outb(SUPERIO_REG_ACT, sio_data->activate);
+			superio_exit();
+		} else {
+			pr_warn("Failed to disable device\n");
+		}
 	}
 }
 
-- 
2.20.1

[PATCH 4.19 159/276] hwmon: (smsc47b397) Use request_muxed_region for Super-IO accesses

[Greg Kroah-Hartman]

[ Upstream commit 8c0826756744c0ac1df600a5e4cca1a341b13101 ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: 8d5d45fb1468 ("I2C: Move hwmon drivers (2/3)")
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: John Garry <john.garry@huawei.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/smsc47b397.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 6bd2007565603..cbdb5c4991ae3 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -72,14 +72,19 @@ static inline void superio_select(int ld)
 	superio_outb(0x07, ld);
 }
 
-static inline void superio_enter(void)
+static inline int superio_enter(void)
 {
+	if (!request_muxed_region(REG, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x55, REG);
+	return 0;
 }
 
 static inline void superio_exit(void)
 {
 	outb(0xAA, REG);
+	release_region(REG, 2);
 }
 
 #define SUPERIO_REG_DEVID	0x20
@@ -300,8 +305,12 @@ static int __init smsc47b397_find(void)
 	u8 id, rev;
 	char *name;
 	unsigned short addr;
+	int err;
+
+	err = superio_enter();
+	if (err)
+		return err;
 
-	superio_enter();
 	id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 
 	switch (id) {
-- 
2.20.1

[PATCH 4.19 160/276] hwmon: (pc87427) Use request_muxed_region for Super-IO accesses

[Greg Kroah-Hartman]

[ Upstream commit 755a9b0f8aaa5639ba5671ca50080852babb89ce ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: ba224e2c4f0a7 ("hwmon: New PC87427 hardware monitoring driver")
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: John Garry <john.garry@huawei.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/pc87427.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index dc5a9d5ada516..81a05cd1a5121 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -106,6 +106,13 @@ static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
 #define LD_IN		1
 #define LD_TEMP		1
 
+static inline int superio_enter(int sioaddr)
+{
+	if (!request_muxed_region(sioaddr, 2, DRVNAME))
+		return -EBUSY;
+	return 0;
+}
+
 static inline void superio_outb(int sioaddr, int reg, int val)
 {
 	outb(reg, sioaddr);
@@ -122,6 +129,7 @@ static inline void superio_exit(int sioaddr)
 {
 	outb(0x02, sioaddr);
 	outb(0x02, sioaddr + 1);
+	release_region(sioaddr, 2);
 }
 
 /*
@@ -1220,7 +1228,11 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
 {
 	u16 val;
 	u8 cfg, cfg_b;
-	int i, err = 0;
+	int i, err;
+
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
 
 	/* Identify device */
 	val = force_id ? force_id : superio_inb(sioaddr, SIOREG_DEVID);
-- 
2.20.1

[PATCH 4.19 161/276] hwmon: (f71805f) Use request_muxed_region for Super-IO accesses

[Greg Kroah-Hartman]

[ Upstream commit 73e6ff71a7ea924fb7121d576a2d41e3be3fc6b5 ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Unable to handle kernel paging request at virtual address ffffffbffee0002e
pgd = ffffffc1d68d4000
[ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000
Internal error: Oops: 94000046 [#1] PREEMPT SMP
Modules linked in: f71805f(+) hwmon
CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88
Hardware name: linux,dummy-virt (DT)
task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000
PC is at f71805f_find+0x6c/0x358 [f71805f]

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple
drivers is synchronized.

Fixes: e53004e20a58e ("hwmon: New f71805f driver")
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: John Garry <john.garry@huawei.com>
Cc: John Garry <john.garry@huawei.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/f71805f.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 73c681162653b..623736d2a7c1d 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -96,17 +96,23 @@ superio_select(int base, int ld)
 	outb(ld, base + 1);
 }
 
-static inline void
+static inline int
 superio_enter(int base)
 {
+	if (!request_muxed_region(base, 2, DRVNAME))
+		return -EBUSY;
+
 	outb(0x87, base);
 	outb(0x87, base);
+
+	return 0;
 }
 
 static inline void
 superio_exit(int base)
 {
 	outb(0xaa, base);
+	release_region(base, 2);
 }
 
 /*
@@ -1561,7 +1567,7 @@ static int __init f71805f_device_add(unsigned short address,
 static int __init f71805f_find(int sioaddr, unsigned short *address,
 			       struct f71805f_sio_data *sio_data)
 {
-	int err = -ENODEV;
+	int err;
 	u16 devid;
 
 	static const char * const names[] = {
@@ -1569,8 +1575,11 @@ static int __init f71805f_find(int sioaddr, unsigned short *address,
 		"F71872F/FG or F71806F/FG",
 	};
 
-	superio_enter(sioaddr);
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
 
+	err = -ENODEV;
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
 	if (devid != SIO_FINTEK_ID)
 		goto exit;
-- 
2.20.1

[PATCH 4.19 162/276] scsi: libsas: Do discovery on empty PHY to update PHY info

[Greg Kroah-Hartman]

[ Upstream commit d8649fc1c5e40e691d589ed825998c36a947491c ]

When we discover the PHY is empty in sas_rediscover_dev(), the PHY
information (like negotiated linkrate) is not updated.

As such, for a user examining sysfs for that PHY, they would see
incorrect values:

root@(none)$ cd /sys/class/sas_phy/phy-0:0:20
root@(none)$ more negotiated_linkrate
3.0 Gbit
root@(none)$ echo 0 > enable
root@(none)$ more negotiated_linkrate
3.0 Gbit

So fix this, simply discover the PHY again, even though we know it's empty;
in the above example, this gives us:

root@(none)$ more negotiated_linkrate
Phy disabled

We must do this after unregistering the device associated with the PHY
(in sas_unregister_devs_sas_addr()).

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libsas/sas_expander.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index e9ecc667e3fb4..231eb79efa320 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -2040,6 +2040,11 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
 	if ((SAS_ADDR(sas_addr) == 0) || (res == -ECOMM)) {
 		phy->phy_state = PHY_EMPTY;
 		sas_unregister_devs_sas_addr(dev, phy_id, last);
+		/*
+		 * Even though the PHY is empty, for convenience we discover
+		 * the PHY to update the PHY info, like negotiated linkrate.
+		 */
+		sas_ex_phy_discover(dev, phy_id);
 		return res;
 	} else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
 		   dev_type_flutter(type, phy->attached_dev_type)) {
-- 
2.20.1

[PATCH 4.19 163/276] mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers

[Greg Kroah-Hartman]

[ Upstream commit 002ee28e8b322d4d4b7b83234b5d0f4ebd428eda ]

pwrseq_emmc.c implements a HW reset procedure for eMMC chip by driving a
GPIO line.

It registers the .reset() cb on mmc_pwrseq_ops and it registers a system
restart notification handler; both of them perform reset by unconditionally
calling gpiod_set_value().

If the eMMC reset line is tied to a GPIO controller whose driver can sleep
(i.e. I2C GPIO controller), then the kernel would spit warnings when trying
to reset the eMMC chip by means of .reset() mmc_pwrseq_ops cb (that is
exactly what I'm seeing during boot).

Furthermore, on system reset we would gets to the system restart
notification handler with disabled interrupts - local_irq_disable() is
called in machine_restart() at least on ARM/ARM64 - and we would be in
trouble when the GPIO driver tries to sleep (which indeed doesn't happen
here, likely because in my case the machine specific code doesn't call
do_kernel_restart(), I guess..).

This patch fixes the .reset() cb to make use of gpiod_set_value_cansleep(),
so that the eMMC gets reset on boot without complaints, while, since there
isn't that much we can do, we avoid register the restart handler if the
GPIO controller has a sleepy driver (and we spit a dev_notice() message to
let people know)..

This had been tested on a downstream 4.9 kernel with backported
commit 83f37ee7ba33 ("mmc: pwrseq: Add reset callback to the struct
mmc_pwrseq_ops") and commit ae60fb031cf2 ("mmc: core: Don't do eMMC HW
reset when resuming the eMMC card"), because I couldn't boot my board
otherwise. Maybe worth to RFT.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/pwrseq_emmc.c | 38 ++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c
index efb8a7965dd4a..154f4204d58cb 100644
--- a/drivers/mmc/core/pwrseq_emmc.c
+++ b/drivers/mmc/core/pwrseq_emmc.c
@@ -30,19 +30,14 @@ struct mmc_pwrseq_emmc {
 
 #define to_pwrseq_emmc(p) container_of(p, struct mmc_pwrseq_emmc, pwrseq)
 
-static void __mmc_pwrseq_emmc_reset(struct mmc_pwrseq_emmc *pwrseq)
-{
-	gpiod_set_value(pwrseq->reset_gpio, 1);
-	udelay(1);
-	gpiod_set_value(pwrseq->reset_gpio, 0);
-	udelay(200);
-}
-
 static void mmc_pwrseq_emmc_reset(struct mmc_host *host)
 {
 	struct mmc_pwrseq_emmc *pwrseq =  to_pwrseq_emmc(host->pwrseq);
 
-	__mmc_pwrseq_emmc_reset(pwrseq);
+	gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);
+	udelay(1);
+	gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
+	udelay(200);
 }
 
 static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
@@ -50,8 +45,11 @@ static int mmc_pwrseq_emmc_reset_nb(struct notifier_block *this,
 {
 	struct mmc_pwrseq_emmc *pwrseq = container_of(this,
 					struct mmc_pwrseq_emmc, reset_nb);
+	gpiod_set_value(pwrseq->reset_gpio, 1);
+	udelay(1);
+	gpiod_set_value(pwrseq->reset_gpio, 0);
+	udelay(200);
 
-	__mmc_pwrseq_emmc_reset(pwrseq);
 	return NOTIFY_DONE;
 }
 
@@ -72,14 +70,18 @@ static int mmc_pwrseq_emmc_probe(struct platform_device *pdev)
 	if (IS_ERR(pwrseq->reset_gpio))
 		return PTR_ERR(pwrseq->reset_gpio);
 
-	/*
-	 * register reset handler to ensure emmc reset also from
-	 * emergency_reboot(), priority 255 is the highest priority
-	 * so it will be executed before any system reboot handler.
-	 */
-	pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;
-	pwrseq->reset_nb.priority = 255;
-	register_restart_handler(&pwrseq->reset_nb);
+	if (!gpiod_cansleep(pwrseq->reset_gpio)) {
+		/*
+		 * register reset handler to ensure emmc reset also from
+		 * emergency_reboot(), priority 255 is the highest priority
+		 * so it will be executed before any system reboot handler.
+		 */
+		pwrseq->reset_nb.notifier_call = mmc_pwrseq_emmc_reset_nb;
+		pwrseq->reset_nb.priority = 255;
+		register_restart_handler(&pwrseq->reset_nb);
+	} else {
+		dev_notice(dev, "EMMC reset pin tied to a sleepy GPIO driver; reset on emergency-reboot disabled\n");
+	}
 
 	pwrseq->pwrseq.ops = &mmc_pwrseq_emmc_ops;
 	pwrseq->pwrseq.dev = dev;
-- 
2.20.1

[PATCH 4.19 164/276] mmc_spi: add a status check for spi_sync_locked

[Greg Kroah-Hartman]

[ Upstream commit 611025983b7976df0183390a63a2166411d177f1 ]

In case spi_sync_locked fails, the fix reports the error and
returns the error code upstream.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mmc_spi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 67f6bd24a9d0c..ea254d00541f1 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -819,6 +819,10 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
 	}
 
 	status = spi_sync_locked(spi, &host->m);
+	if (status < 0) {
+		dev_dbg(&spi->dev, "read error %d\n", status);
+		return status;
+	}
 
 	if (host->dma_dev) {
 		dma_sync_single_for_cpu(host->dma_dev,
-- 
2.20.1

[PATCH 4.19 165/276] mmc: sdhci-of-esdhc: add erratum eSDHC5 support

[Greg Kroah-Hartman]

[ Upstream commit a46e42712596b51874f04c73f1cdf1017f88df52 ]

Software writing to the Transfer Type configuration register
(system clock domain) can cause a setup/hold violation in the
CRC flops (card clock domain), which can cause write accesses
to be sent with corrupt CRC values. This issue occurs only for
write preceded by read. this erratum is to fix this issue.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index a7bf8515116fd..b2199d621b8c5 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -917,6 +917,9 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	if (esdhc->vendor_ver > VENDOR_V_22)
 		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 
+	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc"))
+		host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+
 	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
-- 
2.20.1

[PATCH 4.19 166/276] mmc: sdhci-of-esdhc: add erratum A-009204 support

[Greg Kroah-Hartman]

[ Upstream commit 5dd195522562542bc6ebe6e7bd47890d8b7ca93c ]

In the event of that any data error (like, IRQSTAT[DCE]) occurs
during an eSDHC data transaction where DMA is used for data
transfer to/from the system memory, setting the SYSCTL[RSTD]
register may cause a system hang. If software sets the register
SYSCTL[RSTD] to 1 for error recovery while DMA transferring is
not complete, eSDHC may hang the system bus. This happens because
the software register SYSCTL[RSTD] resets the DMA engine without
waiting for the completion of pending system transactions. This
erratum is to fix this issue.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index b2199d621b8c5..e63d22fb99edf 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -643,6 +643,9 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
 	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
 	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 
+	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc"))
+		mdelay(5);
+
 	if (mask & SDHCI_RESET_ALL) {
 		val = sdhci_readl(host, ESDHC_TBCTL);
 		val &= ~ESDHC_TB_EN;
-- 
2.20.1

[PATCH 4.19 167/276] mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support

[Greg Kroah-Hartman]

[ Upstream commit 05cb6b2a66fa7837211a060878e91be5eb10cb07 ]

eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not
reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock),
and 0xC(2^25 SD clock). The data timeout counter can count from
2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout
counter counts for only 2^13 SD clocks.
A-008358: The data timeout counter value loaded into the timeout
counter is less than expected and can result into early timeout
error in case of eSDHC data transactions. The table below shows
the expected vs actual timeout period for different values of
SYSCTL[DTOCV]:
these two erratum has the same quirk to control it, and set
SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index e63d22fb99edf..e5c598ae5f244 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -920,8 +920,10 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
 	if (esdhc->vendor_ver > VENDOR_V_22)
 		host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 
-	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc"))
+	if (of_find_compatible_node(NULL, NULL, "fsl,p2020-esdhc")) {
 		host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
+		host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+	}
 
 	if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
-- 
2.20.1

[PATCH 4.19 168/276] drm/amdgpu: fix old fence check in amdgpu_fence_emit

[Greg Kroah-Hartman]

[ Upstream commit 3d2aca8c8620346abdba96c6300d2c0b90a1d0cc ]

We don't hold a reference to the old fence, so it can go away
any time we are waiting for it to signal.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 24 ++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 7056925eb3860..869ff624b108c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -136,8 +136,9 @@ int amdgpu_fence_emit(struct amdgpu_ring *ring, struct dma_fence **f,
 {
 	struct amdgpu_device *adev = ring->adev;
 	struct amdgpu_fence *fence;
-	struct dma_fence *old, **ptr;
+	struct dma_fence __rcu **ptr;
 	uint32_t seq;
+	int r;
 
 	fence = kmem_cache_alloc(amdgpu_fence_slab, GFP_KERNEL);
 	if (fence == NULL)
@@ -153,15 +154,24 @@ int amdgpu_fence_emit(struct amdgpu_ring *ring, struct dma_fence **f,
 			       seq, flags | AMDGPU_FENCE_FLAG_INT);
 
 	ptr = &ring->fence_drv.fences[seq & ring->fence_drv.num_fences_mask];
+	if (unlikely(rcu_dereference_protected(*ptr, 1))) {
+		struct dma_fence *old;
+
+		rcu_read_lock();
+		old = dma_fence_get_rcu_safe(ptr);
+		rcu_read_unlock();
+
+		if (old) {
+			r = dma_fence_wait(old, false);
+			dma_fence_put(old);
+			if (r)
+				return r;
+		}
+	}
+
 	/* This function can't be called concurrently anyway, otherwise
 	 * emitting the fence would mess up the hardware ring buffer.
 	 */
-	old = rcu_dereference_protected(*ptr, 1);
-	if (old && !dma_fence_is_signaled(old)) {
-		DRM_INFO("rcu slot is busy\n");
-		dma_fence_wait(old, false);
-	}
-
 	rcu_assign_pointer(*ptr, dma_fence_get(&fence->base));
 
 	*f = &fence->base;
-- 
2.20.1

[PATCH 4.19 169/276] PM / core: Propagate dev->power.wakeup_path when no callbacks

[Greg Kroah-Hartman]

[ Upstream commit dc351d4c5f4fe4d0f274d6d660227be0c3a03317 ]

The dev->power.direct_complete flag may become set in device_prepare() in
case the device don't have any PM callbacks (dev->power.no_pm_callbacks is
set). This leads to a broken behaviour, when there is child having wakeup
enabled and relies on its parent to be used in the wakeup path.

More precisely, when the direct complete path becomes selected for the
child in __device_suspend(), the propagation of the dev->power.wakeup_path
becomes skipped as well.

Let's address this problem, by checking if the device is a part the wakeup
path or has wakeup enabled, then prevent the direct complete path from
being used.

Reported-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ rjw: Comment cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/power/main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index a690fd4002605..4abd7c6531d9d 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1736,6 +1736,10 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	if (dev->power.syscore)
 		goto Complete;
 
+	/* Avoid direct_complete to let wakeup_path propagate. */
+	if (device_may_wakeup(dev) || dev->power.wakeup_path)
+		dev->power.direct_complete = false;
+
 	if (dev->power.direct_complete) {
 		if (pm_runtime_status_suspended(dev)) {
 			pm_runtime_disable(dev);
-- 
2.20.1

[PATCH 4.19 170/276] clk: rockchip: Fix video codec clocks on rk3288

[Greg Kroah-Hartman]

[ Upstream commit 00c0cd9e59d265b393553e9afa54fee8b10e8158 ]

It appears that there is a typo in the rk3288 TRM.  For
GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu".  It's
the other way around.

How do I know?  Here's my evidence:

1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
   using the new muxgrf type on rk3288") we always pretended that we
   were using "aclk_vdpu" and the comment in the code said that this
   matched the default setting in the system.  In fact the default
   setting is 0 according to the TRM and according to reading memory
   at bootup.  In addition rk3288-based Chromebooks ran like this and
   the video codecs worked.
2. With the existing clock code if you boot up and try to enable the
   new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
   on the command line), you get errors like "failed to get ack on
   domain 'pd_video', val=0x80208".  After flipping vepu/vdpu things
   init OK.
3. If I export and add both the vepu and vdpu to the list of clocks
   for RK3288_PD_VIDEO I can get past the power domain errors, but now
   I freeze when the vpu_mmu gets initted.
4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
   and probes OK showing that somehow the "vdpu" was important to keep
   enabled.  This is because we were actually using it as a parent.
5. After this change I can hack "aclk_vcodec_pre" to parent from
   "aclk_vepu" using assigned-clocks and the video codec still probes
   OK.
6. Rockchip has said so on the mailing list [1].

...so let's fix it.

Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested
by Jonas Karlman.  Prior to the same commit you could do
clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu".
That's because "aclk_vcodec" was a simple gate clock (always gets
CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu".  After
that commit "aclk_vcodec_pre" gets in the way so we need to add
CLK_SET_RATE_PARENT to it too.

[1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com

Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Suggested-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3288.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 45cd2897e586b..c6cd6d28af56f 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -198,7 +198,7 @@ PNAME(mux_hsadcout_p)	= { "hsadc_src", "ext_hsadc" };
 PNAME(mux_edp_24m_p)	= { "ext_edp_24m", "xin24m" };
 PNAME(mux_tspout_p)	= { "cpll", "gpll", "npll", "xin27m" };
 
-PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vepu", "aclk_vdpu" };
+PNAME(mux_aclk_vcodec_pre_p)	= { "aclk_vdpu", "aclk_vepu" };
 PNAME(mux_usbphy480m_p)		= { "sclk_otgphy1_480m", "sclk_otgphy2_480m",
 				    "sclk_otgphy0_480m" };
 PNAME(mux_hsicphy480m_p)	= { "cpll", "gpll", "usbphy480m_src" };
@@ -399,7 +399,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
 			RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK3288_CLKGATE_CON(3), 11, GFLAGS),
-	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, 0,
+	MUXGRF(0, "aclk_vcodec_pre", mux_aclk_vcodec_pre_p, CLK_SET_RATE_PARENT,
 			RK3288_GRF_SOC_CON(0), 7, 1, MFLAGS),
 	GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vcodec_pre", 0,
 		RK3288_CLKGATE_CON(9), 0, GFLAGS),
-- 
2.20.1

[PATCH 4.19 171/276] extcon: arizona: Disable mic detect if running when driver is removed

[Greg Kroah-Hartman]

[ Upstream commit 00053de52231117ddc154042549f2256183ffb86 ]

Microphone detection provides the button detection features on the
Arizona CODECs as such it will be running if the jack is currently
inserted. If the driver is unbound whilst the jack is still inserted
this will cause warnings from the regulator framework as the MICVDD
regulator is put but was never disabled.

Correct this by disabling microphone detection on driver removal and if
the microphone detection was running disable the regulator and put the
runtime reference that was currently held.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-arizona.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index da0e9bc4262fa..9327479c719c2 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1726,6 +1726,16 @@ static int arizona_extcon_remove(struct platform_device *pdev)
 	struct arizona_extcon_info *info = platform_get_drvdata(pdev);
 	struct arizona *arizona = info->arizona;
 	int jack_irq_rise, jack_irq_fall;
+	bool change;
+
+	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				 ARIZONA_MICD_ENA, 0,
+				 &change);
+
+	if (change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put(info->dev);
+	}
 
 	gpiod_put(info->micd_pol_gpio);
 
-- 
2.20.1

[PATCH 4.19 172/276] clk: rockchip: Make rkpwm a critical clock on rk3288

[Greg Kroah-Hartman]

[ Upstream commit dfe7fb21cd9e730230d55a79bc72cf2ece67cdd5 ]

Most rk3288-based boards are derived from the EVB and thus use a PWM
regulator for the logic rail.  However, most rk3288-based boards don't
specify the PWM regulator in their device tree.  We'll deal with that
by making it critical.

NOTE: it's important to make it critical and not just IGNORE_UNUSED
because all PWMs in the system share the same clock.  We don't want
another PWM user to turn the clock on and off and kill the logic rail.

This change is in preparation for actually having the PWMs in the
rk3288 device tree actually point to the proper PWM clock.  Up until
now they've all pointed to the clock for the old IP block and they've
all worked due to the fact that rkpwm was IGNORE_UNUSED and that the
clock rates for both clocks were the same.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/rockchip/clk-rk3288.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index c6cd6d28af56f..64191694ff6e9 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -676,7 +676,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	GATE(PCLK_TZPC, "pclk_tzpc", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 3, GFLAGS),
 	GATE(PCLK_UART2, "pclk_uart2", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 9, GFLAGS),
 	GATE(PCLK_EFUSE256, "pclk_efuse_256", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 10, GFLAGS),
-	GATE(PCLK_RKPWM, "pclk_rkpwm", "pclk_cpu", CLK_IGNORE_UNUSED, RK3288_CLKGATE_CON(11), 11, GFLAGS),
+	GATE(PCLK_RKPWM, "pclk_rkpwm", "pclk_cpu", 0, RK3288_CLKGATE_CON(11), 11, GFLAGS),
 
 	/* ddrctrl [DDR Controller PHY clock] gates */
 	GATE(0, "nclk_ddrupctl0", "ddrphy", CLK_IGNORE_UNUSED, RK3288_CLKGATE_CON(11), 4, GFLAGS),
@@ -817,6 +817,8 @@ static const char *const rk3288_critical_clocks[] __initconst = {
 	"pclk_pd_pmu",
 	"pclk_pmu_niu",
 	"pmu_hclk_otg0",
+	/* pwm-regulators on some boards, so handoff-critical later */
+	"pclk_rkpwm",
 };
 
 static void __iomem *rk3288_cru_base;
-- 
2.20.1

[PATCH 4.19 173/276] s390: zcrypt: initialize variables before_use

[Greg Kroah-Hartman]

[ Upstream commit 913140e221567b3ecd21b4242257a7e3fa279026 ]

The 'func_code' variable gets printed in debug statements without
a prior initialization in multiple functions, as reported when building
with clang:

drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true
      [-Wsometimes-uninitialized]
        if (mex->outputdatalength < mex->inputdatalength) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here
        trace_s390_zcrypt_rep(mex, func_code, rc,
                                   ^~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false
        if (mex->outputdatalength < mex->inputdatalength) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning
        unsigned int func_code;
                              ^

Add initializations to all affected code paths to shut up the warning
and make the warning output consistent.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/crypto/zcrypt_api.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index e6854127b4343..b2737bfeb8bb6 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -224,6 +224,7 @@ static long zcrypt_rsa_modexpo(struct ica_rsa_modexpo *mex)
 	trace_s390_zcrypt_req(mex, TP_ICARSAMODEXPO);
 
 	if (mex->outputdatalength < mex->inputdatalength) {
+		func_code = 0;
 		rc = -EINVAL;
 		goto out;
 	}
@@ -298,6 +299,7 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt)
 	trace_s390_zcrypt_req(crt, TP_ICARSACRT);
 
 	if (crt->outputdatalength < crt->inputdatalength) {
+		func_code = 0;
 		rc = -EINVAL;
 		goto out;
 	}
@@ -483,6 +485,7 @@ static long zcrypt_send_ep11_cprb(struct ep11_urb *xcrb)
 
 		targets = kcalloc(target_num, sizeof(*targets), GFP_KERNEL);
 		if (!targets) {
+			func_code = 0;
 			rc = -ENOMEM;
 			goto out;
 		}
@@ -490,6 +493,7 @@ static long zcrypt_send_ep11_cprb(struct ep11_urb *xcrb)
 		uptr = (struct ep11_target_dev __force __user *) xcrb->targets;
 		if (copy_from_user(targets, uptr,
 				   target_num * sizeof(*targets))) {
+			func_code = 0;
 			rc = -EFAULT;
 			goto out_free;
 		}
-- 
2.20.1

[PATCH 4.19 174/276] x86/microcode: Fix the ancient deprecated microcode loading method

[Greg Kroah-Hartman]

[ Upstream commit 24613a04ad1c0588c10f4b5403ca60a73d164051 ]

Commit

  2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present")

added the new define UCODE_NEW to denote that an update should happen
only when newer microcode (than installed on the system) has been found.

But it missed adjusting that for the old /dev/cpu/microcode loading
interface. Fix it.

Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Link: https://lkml.kernel.org/r/20190405133010.24249-3-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/microcode/core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index b9bc8a1a584e3..b43ddefd77f45 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -418,8 +418,9 @@ static int do_microcode_update(const void __user *buf, size_t size)
 		if (ustate == UCODE_ERROR) {
 			error = -1;
 			break;
-		} else if (ustate == UCODE_OK)
+		} else if (ustate == UCODE_NEW) {
 			apply_microcode_on_target(cpu);
+		}
 	}
 
 	return error;
-- 
2.20.1

[PATCH 4.19 175/276] s390/mm: silence compiler warning when compiling without CONFIG_PGSTE

[Greg Kroah-Hartman]

[ Upstream commit 81a8f2beb32a5951ecf04385301f50879abc092b ]

If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains:

  CC      arch/s390/mm/pgtable.o
arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not
 used [-Wunused-function]
 static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr)
               ^~~~~~~~~~~~~

Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/pgtable.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index f2cc7da473e4e..ae894ac83fd61 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -410,6 +410,7 @@ static inline pmd_t pmdp_flush_lazy(struct mm_struct *mm,
 	return old;
 }
 
+#ifdef CONFIG_PGSTE
 static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pgd;
@@ -427,6 +428,7 @@ static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr)
 	pmd = pmd_alloc(mm, pud, addr);
 	return pmd;
 }
+#endif
 
 pmd_t pmdp_xchg_direct(struct mm_struct *mm, unsigned long addr,
 		       pmd_t *pmdp, pmd_t new)
-- 
2.20.1

[PATCH 4.19 176/276] s390: cio: fix cio_irb declaration

[Greg Kroah-Hartman]

[ Upstream commit e91012ee855ad9f5ef2ab106a3de51db93fe4d0c ]

clang points out that the declaration of cio_irb does not match the
definition exactly, it is missing the alignment attribute:

../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection]
DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED'
        DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION)     \
        ^
../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION'
        extern __PCPU_ATTRS(sec) __typeof__(type) name;                 \
               ^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
        __percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))     \
                                ^
../drivers/s390/cio/cio.h:118:1: note: previous attribute is here
DECLARE_PER_CPU(struct irb, cio_irb);
^
../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU'
        DECLARE_PER_CPU_SECTION(type, name, "")
        ^
../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION'
        extern __PCPU_ATTRS(sec) __typeof__(type) name
               ^
../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS'
        __percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))     \
                                ^
Use DECLARE_PER_CPU_ALIGNED() here, to make the two match.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/cio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 9811fd8a0c731..92eabbb5f18d4 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -115,7 +115,7 @@ struct subchannel {
 	struct schib_config config;
 } __attribute__ ((aligned(8)));
 
-DECLARE_PER_CPU(struct irb, cio_irb);
+DECLARE_PER_CPU_ALIGNED(struct irb, cio_irb);
 
 #define to_subchannel(n) container_of(n, struct subchannel, dev)
 
-- 
2.20.1

[PATCH 4.19 177/276] selftests: cgroup: fix cleanup path in test_memcg_subtree_control()

[Greg Kroah-Hartman]

[ Upstream commit e14d314c7a489f060d6d691866fef5f131281718 ]

Dan reported, that cleanup path in test_memcg_subtree_control()
triggers a static checker warning:
  ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \
  test_memcg_subtree_control()
  error: uninitialized symbol 'child2'.

Fix this by initializing child2 and parent2 variables and
split the cleanup path into few stages.

Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/cgroup/test_memcontrol.c        | 38 ++++++++++---------
 1 file changed, 21 insertions(+), 17 deletions(-)

diff --git a/tools/testing/selftests/cgroup/test_memcontrol.c b/tools/testing/selftests/cgroup/test_memcontrol.c
index 28d321ba311b4..6f339882a6ca1 100644
--- a/tools/testing/selftests/cgroup/test_memcontrol.c
+++ b/tools/testing/selftests/cgroup/test_memcontrol.c
@@ -26,7 +26,7 @@
  */
 static int test_memcg_subtree_control(const char *root)
 {
-	char *parent, *child, *parent2, *child2;
+	char *parent, *child, *parent2 = NULL, *child2 = NULL;
 	int ret = KSFT_FAIL;
 	char buf[PAGE_SIZE];
 
@@ -34,50 +34,54 @@ static int test_memcg_subtree_control(const char *root)
 	parent = cg_name(root, "memcg_test_0");
 	child = cg_name(root, "memcg_test_0/memcg_test_1");
 	if (!parent || !child)
-		goto cleanup;
+		goto cleanup_free;
 
 	if (cg_create(parent))
-		goto cleanup;
+		goto cleanup_free;
 
 	if (cg_write(parent, "cgroup.subtree_control", "+memory"))
-		goto cleanup;
+		goto cleanup_parent;
 
 	if (cg_create(child))
-		goto cleanup;
+		goto cleanup_parent;
 
 	if (cg_read_strstr(child, "cgroup.controllers", "memory"))
-		goto cleanup;
+		goto cleanup_child;
 
 	/* Create two nested cgroups without enabling memory controller */
 	parent2 = cg_name(root, "memcg_test_1");
 	child2 = cg_name(root, "memcg_test_1/memcg_test_1");
 	if (!parent2 || !child2)
-		goto cleanup;
+		goto cleanup_free2;
 
 	if (cg_create(parent2))
-		goto cleanup;
+		goto cleanup_free2;
 
 	if (cg_create(child2))
-		goto cleanup;
+		goto cleanup_parent2;
 
 	if (cg_read(child2, "cgroup.controllers", buf, sizeof(buf)))
-		goto cleanup;
+		goto cleanup_all;
 
 	if (!cg_read_strstr(child2, "cgroup.controllers", "memory"))
-		goto cleanup;
+		goto cleanup_all;
 
 	ret = KSFT_PASS;
 
-cleanup:
-	cg_destroy(child);
-	cg_destroy(parent);
-	free(parent);
-	free(child);
-
+cleanup_all:
 	cg_destroy(child2);
+cleanup_parent2:
 	cg_destroy(parent2);
+cleanup_free2:
 	free(parent2);
 	free(child2);
+cleanup_child:
+	cg_destroy(child);
+cleanup_parent:
+	cg_destroy(parent);
+cleanup_free:
+	free(parent);
+	free(child);
 
 	return ret;
 }
-- 
2.20.1

[PATCH 4.19 178/276] qmi_wwan: Add quirk for Quectel dynamic config

[Greg Kroah-Hartman]

[ Upstream commit e4bf63482c309287ca84d91770ffa7dcc18e37eb ]

Most, if not all, Quectel devices use dynamic interface numbers, and
users are able to change the USB configuration at will. Matching on for
example interface number is therefore not possible.

Instead, the QMI device can be identified by looking at the interface
class, subclass and protocol (all 0xff), as well as the number of
endpoints. The reason we need to look at the number of endpoints, is
that the diagnostic port interface has the same class, subclass and
protocol as QMI. However, the diagnostic port only has two endpoints,
while QMI has three.

Until now, we have identified the QMI device by combining a match on
class, subclass and protocol, with a call to the function
quectel_diag_detect(). In quectel_diag_detect(), we check if the number
of endpoints matches for known Quectel vendor/product ids.

Adding new vendor/product ids to quectel_diag_detect() is not a good
long-term solution. This commit replaces the function with a quirk, and
applies the quirk to affected Quectel devices that I have been able to
test the change with (EP06, EM12 and EC25). If the quirk is set and the
number of endpoints equal two, we return from qmi_wwan_probe() with
-ENODEV.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 65 ++++++++++++++++++--------------------
 1 file changed, 31 insertions(+), 34 deletions(-)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 366217263d704..d9a6699abe592 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -63,6 +63,7 @@ enum qmi_wwan_flags {
 
 enum qmi_wwan_quirks {
 	QMI_WWAN_QUIRK_DTR = 1 << 0,	/* needs "set DTR" request */
+	QMI_WWAN_QUIRK_QUECTEL_DYNCFG = 1 << 1,	/* check num. endpoints */
 };
 
 struct qmimux_hdr {
@@ -845,6 +846,16 @@ static const struct driver_info	qmi_wwan_info_quirk_dtr = {
 	.data           = QMI_WWAN_QUIRK_DTR,
 };
 
+static const struct driver_info	qmi_wwan_info_quirk_quectel_dyncfg = {
+	.description	= "WWAN/QMI device",
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind		= qmi_wwan_bind,
+	.unbind		= qmi_wwan_unbind,
+	.manage_power	= qmi_wwan_manage_power,
+	.rx_fixup       = qmi_wwan_rx_fixup,
+	.data           = QMI_WWAN_QUIRK_DTR | QMI_WWAN_QUIRK_QUECTEL_DYNCFG,
+};
+
 #define HUAWEI_VENDOR_ID	0x12D1
 
 /* map QMI/wwan function by a fixed interface number */
@@ -865,6 +876,15 @@ static const struct driver_info	qmi_wwan_info_quirk_dtr = {
 #define QMI_GOBI_DEVICE(vend, prod) \
 	QMI_FIXED_INTF(vend, prod, 0)
 
+/* Quectel does not use fixed interface numbers on at least some of their
+ * devices. We need to check the number of endpoints to ensure that we bind to
+ * the correct interface.
+ */
+#define QMI_QUIRK_QUECTEL_DYNCFG(vend, prod) \
+	USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, \
+				      USB_SUBCLASS_VENDOR_SPEC, 0xff), \
+	.driver_info = (unsigned long)&qmi_wwan_info_quirk_quectel_dyncfg
+
 static const struct usb_device_id products[] = {
 	/* 1. CDC ECM like devices match on the control interface */
 	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */
@@ -969,20 +989,9 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
 		.driver_info = (unsigned long)&qmi_wwan_info,
 	},
-	{	/* Quectel EP06/EG06/EM06 */
-		USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x0306,
-					      USB_CLASS_VENDOR_SPEC,
-					      USB_SUBCLASS_VENDOR_SPEC,
-					      0xff),
-		.driver_info	    = (unsigned long)&qmi_wwan_info_quirk_dtr,
-	},
-	{	/* Quectel EG12/EM12 */
-		USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x0512,
-					      USB_CLASS_VENDOR_SPEC,
-					      USB_SUBCLASS_VENDOR_SPEC,
-					      0xff),
-		.driver_info	    = (unsigned long)&qmi_wwan_info_quirk_dtr,
-	},
+	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
+	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
+	{QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
@@ -1283,7 +1292,6 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
 	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
 	{QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)},	/* SIMCom 7100E, 7230E, 7600E ++ */
-	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)},	/* Quectel EC21 Mini PCIe */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)},	/* Quectel EG91 */
 	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
@@ -1363,27 +1371,12 @@ static bool quectel_ec20_detected(struct usb_interface *intf)
 	return false;
 }
 
-static bool quectel_diag_detected(struct usb_interface *intf)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_interface_descriptor intf_desc = intf->cur_altsetting->desc;
-	u16 id_vendor = le16_to_cpu(dev->descriptor.idVendor);
-	u16 id_product = le16_to_cpu(dev->descriptor.idProduct);
-
-	if (id_vendor != 0x2c7c || intf_desc.bNumEndpoints != 2)
-		return false;
-
-	if (id_product == 0x0306 || id_product == 0x0512)
-		return true;
-	else
-		return false;
-}
-
 static int qmi_wwan_probe(struct usb_interface *intf,
 			  const struct usb_device_id *prod)
 {
 	struct usb_device_id *id = (struct usb_device_id *)prod;
 	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
+	const struct driver_info *info;
 
 	/* Workaround to enable dynamic IDs.  This disables usbnet
 	 * blacklisting functionality.  Which, if required, can be
@@ -1417,10 +1410,14 @@ static int qmi_wwan_probe(struct usb_interface *intf,
 	 * we need to match on class/subclass/protocol. These values are
 	 * identical for the diagnostic- and QMI-interface, but bNumEndpoints is
 	 * different. Ignore the current interface if the number of endpoints
-	 * the number for the diag interface (two).
+	 * equals the number for the diag interface (two).
 	 */
-	if (quectel_diag_detected(intf))
-		return -ENODEV;
+	info = (void *)&id->driver_info;
+
+	if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) {
+		if (desc->bNumEndpoints == 2)
+			return -ENODEV;
+	}
 
 	return usbnet_probe(intf, id);
 }
-- 
2.20.1

[PATCH 4.19 179/276] cpufreq: ppc_cbe: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit 233298032803f2802fe99892d0de4ab653bfece4 ]

The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.
./drivers/cpufreq/ppc_cbe_cpufreq.c:89:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 76, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/ppc_cbe_cpufreq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.c b/drivers/cpufreq/ppc_cbe_cpufreq.c
index 41a0f0be3f9ff..8414c3a4ea08c 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.c
@@ -86,6 +86,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
 	    !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
 		pr_info("invalid CBE regs pointers for cpufreq\n");
+		of_node_put(cpu);
 		return -EINVAL;
 	}
 
-- 
2.20.1

[PATCH 4.19 180/276] cpufreq/pasemi: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit a9acc26b75f652f697e02a9febe2ab0da648a571 ]

The call to of_get_cpu_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/cpufreq/pasemi-cpufreq.c:212:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.
./drivers/cpufreq/pasemi-cpufreq.c:220:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 147, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pasemi-cpufreq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c
index 75dfbd2a58ea6..c7710c149de85 100644
--- a/drivers/cpufreq/pasemi-cpufreq.c
+++ b/drivers/cpufreq/pasemi-cpufreq.c
@@ -146,6 +146,7 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
 
+	of_node_put(cpu);
 	if (!cpu)
 		goto out;
 
-- 
2.20.1

[PATCH 4.19 181/276] cpufreq: pmac32: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit 8d10dc28a9ea6e8c02e825dab28699f3c72b02d9 ]

The call to of_find_node_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/cpufreq/pmac32-cpufreq.c:557:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:569:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 552, but without a corresponding object release within this function.
./drivers/cpufreq/pmac32-cpufreq.c:598:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 587, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-pm@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/pmac32-cpufreq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index 61ae06ca008e7..e225edb5c3593 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -552,6 +552,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
 	if (volt_gpio_np)
 		voltage_gpio = read_gpio(volt_gpio_np);
+	of_node_put(volt_gpio_np);
 	if (!voltage_gpio){
 		pr_err("missing cpu-vcore-select gpio\n");
 		return 1;
@@ -588,6 +589,7 @@ static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 	if (volt_gpio_np)
 		voltage_gpio = read_gpio(volt_gpio_np);
 
+	of_node_put(volt_gpio_np);
 	pvr = mfspr(SPRN_PVR);
 	has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
 
-- 
2.20.1

[PATCH 4.19 182/276] cpufreq: kirkwood: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit 7c468966f05ac9c17bb5948275283d34e6fe0660 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/cpufreq/kirkwood-cpufreq.c:127:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.
./drivers/cpufreq/kirkwood-cpufreq.c:133:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 118, but without a corresponding object release within this function.

and also do some cleanup:
- of_node_put(np);
- np = NULL;
...
of_node_put(np);

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/kirkwood-cpufreq.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index c2dd43f3f5d8a..8d63a6dc8383c 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -124,13 +124,14 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev)
 	priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk");
 	if (IS_ERR(priv.cpu_clk)) {
 		dev_err(priv.dev, "Unable to get cpuclk\n");
-		return PTR_ERR(priv.cpu_clk);
+		err = PTR_ERR(priv.cpu_clk);
+		goto out_node;
 	}
 
 	err = clk_prepare_enable(priv.cpu_clk);
 	if (err) {
 		dev_err(priv.dev, "Unable to prepare cpuclk\n");
-		return err;
+		goto out_node;
 	}
 
 	kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000;
@@ -161,20 +162,22 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev)
 		goto out_ddr;
 	}
 
-	of_node_put(np);
-	np = NULL;
-
 	err = cpufreq_register_driver(&kirkwood_cpufreq_driver);
-	if (!err)
-		return 0;
+	if (err) {
+		dev_err(priv.dev, "Failed to register cpufreq driver\n");
+		goto out_powersave;
+	}
 
-	dev_err(priv.dev, "Failed to register cpufreq driver\n");
+	of_node_put(np);
+	return 0;
 
+out_powersave:
 	clk_disable_unprepare(priv.powersave_clk);
 out_ddr:
 	clk_disable_unprepare(priv.ddr_clk);
 out_cpu:
 	clk_disable_unprepare(priv.cpu_clk);
+out_node:
 	of_node_put(np);
 
 	return err;
-- 
2.20.1

[PATCH 4.19 183/276] block: sed-opal: fix IOC_OPAL_ENABLE_DISABLE_MBR

[Greg Kroah-Hartman]

[ Upstream commit 78bf47353b0041865564deeed257a54f047c2fdc ]

The implementation of IOC_OPAL_ENABLE_DISABLE_MBR handled the value
opal_mbr_data.enable_disable incorrectly: enable_disable is expected
to be one of OPAL_MBR_ENABLE(0) or OPAL_MBR_DISABLE(1). enable_disable
was passed directly to set_mbr_done and set_mbr_enable_disable where
is was interpreted as either OPAL_TRUE(1) or OPAL_FALSE(0). The end
result was that calling IOC_OPAL_ENABLE_DISABLE_MBR with OPAL_MBR_ENABLE
actually disabled the shadow MBR and vice versa.

This patch adds correct conversion from OPAL_MBR_DISABLE/ENABLE to
OPAL_FALSE/TRUE. The change affects existing programs using
IOC_OPAL_ENABLE_DISABLE_MBR but this is typically used only once when
setting up an Opal drive.

Acked-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/sed-opal.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/block/sed-opal.c b/block/sed-opal.c
index e0de4dd448b3c..1196408972937 100644
--- a/block/sed-opal.c
+++ b/block/sed-opal.c
@@ -2095,13 +2095,16 @@ static int opal_erase_locking_range(struct opal_dev *dev,
 static int opal_enable_disable_shadow_mbr(struct opal_dev *dev,
 					  struct opal_mbr_data *opal_mbr)
 {
+	u8 enable_disable = opal_mbr->enable_disable == OPAL_MBR_ENABLE ?
+		OPAL_TRUE : OPAL_FALSE;
+
 	const struct opal_step mbr_steps[] = {
 		{ opal_discovery0, },
 		{ start_admin1LSP_opal_session, &opal_mbr->key },
-		{ set_mbr_done, &opal_mbr->enable_disable },
+		{ set_mbr_done, &enable_disable },
 		{ end_opal_session, },
 		{ start_admin1LSP_opal_session, &opal_mbr->key },
-		{ set_mbr_enable_disable, &opal_mbr->enable_disable },
+		{ set_mbr_enable_disable, &enable_disable },
 		{ end_opal_session, },
 		{ NULL, }
 	};
@@ -2221,7 +2224,7 @@ static int __opal_lock_unlock(struct opal_dev *dev,
 
 static int __opal_set_mbr_done(struct opal_dev *dev, struct opal_key *key)
 {
-	u8 mbr_done_tf = 1;
+	u8 mbr_done_tf = OPAL_TRUE;
 	const struct opal_step mbrdone_step [] = {
 		{ opal_discovery0, },
 		{ start_admin1LSP_opal_session, key },
-- 
2.20.1

[PATCH 4.19 184/276] x86/build: Keep local relocations with ld.lld

[Greg Kroah-Hartman]

[ Upstream commit 7c21383f3429dd70da39c0c7f1efa12377a47ab6 ]

The LLVM linker (ld.lld) defaults to removing local relocations, which
causes KASLR boot failures. ld.bfd and ld.gold already handle this
correctly. This adds the explicit instruction "--discard-none" during
the link phase. There is no change in output for ld.bfd and ld.gold,
but ld.lld now produces an image with all the needed relocations.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190404214027.GA7324@beast
Link: https://github.com/ClangBuiltLinux/linux/issues/404
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index ffc823a8312fb..ab2071e40efe3 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -47,7 +47,7 @@ export REALMODE_CFLAGS
 export BITS
 
 ifdef CONFIG_X86_NEED_RELOCS
-        LDFLAGS_vmlinux := --emit-relocs
+        LDFLAGS_vmlinux := --emit-relocs --discard-none
 endif
 
 #
-- 
2.20.1

[PATCH 4.19 185/276] drm/pl111: fix possible object reference leak

[Greg Kroah-Hartman]

[ Upstream commit bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ]

The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/pl111/pl111_versatile.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/pl111/pl111_versatile.c b/drivers/gpu/drm/pl111/pl111_versatile.c
index b9baefdba38a1..1c318ad32a8cd 100644
--- a/drivers/gpu/drm/pl111/pl111_versatile.c
+++ b/drivers/gpu/drm/pl111/pl111_versatile.c
@@ -330,6 +330,7 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 		ret = vexpress_muxfpga_init();
 		if (ret) {
 			dev_err(dev, "unable to initialize muxfpga driver\n");
+			of_node_put(np);
 			return ret;
 		}
 
@@ -337,17 +338,20 @@ int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
 		pdev = of_find_device_by_node(np);
 		if (!pdev) {
 			dev_err(dev, "can't find the sysreg device, deferring\n");
+			of_node_put(np);
 			return -EPROBE_DEFER;
 		}
 		map = dev_get_drvdata(&pdev->dev);
 		if (!map) {
 			dev_err(dev, "sysreg has not yet probed\n");
 			platform_device_put(pdev);
+			of_node_put(np);
 			return -EPROBE_DEFER;
 		}
 	} else {
 		map = syscon_node_to_regmap(np);
 	}
+	of_node_put(np);
 
 	if (IS_ERR(map)) {
 		dev_err(dev, "no Versatile syscon regmap\n");
-- 
2.20.1

[PATCH 4.19 186/276] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion

[Greg Kroah-Hartman]

[ Upstream commit df1d80aee963480c5c2938c64ec0ac3e4a0df2e0 ]

For devices from the SigmaDelta family we need to keep CS low when doing a
conversion, since the device will use the MISO line as a interrupt to
indicate that the conversion is complete.

This is why the driver locks the SPI bus and when the SPI bus is locked
keeps as long as a conversion is going on. The current implementation gets
one small detail wrong though. CS is only de-asserted after the SPI bus is
unlocked. This means it is possible for a different SPI device on the same
bus to send a message which would be wrongfully be addressed to the
SigmaDelta device as well. Make sure that the last SPI transfer that is
done while holding the SPI bus lock de-asserts the CS signal.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <Alexandru.Ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad_sigma_delta.c       | 16 +++++++++++-----
 include/linux/iio/adc/ad_sigma_delta.h |  1 +
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index ae2a5097f4493..25af4c76b57fe 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -62,7 +62,7 @@ int ad_sd_write_reg(struct ad_sigma_delta *sigma_delta, unsigned int reg,
 	struct spi_transfer t = {
 		.tx_buf		= data,
 		.len		= size + 1,
-		.cs_change	= sigma_delta->bus_locked,
+		.cs_change	= sigma_delta->keep_cs_asserted,
 	};
 	struct spi_message m;
 	int ret;
@@ -218,6 +218,7 @@ static int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 
 	spi_bus_lock(sigma_delta->spi->master);
 	sigma_delta->bus_locked = true;
+	sigma_delta->keep_cs_asserted = true;
 	reinit_completion(&sigma_delta->completion);
 
 	ret = ad_sigma_delta_set_mode(sigma_delta, mode);
@@ -235,9 +236,10 @@ static int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
 		ret = 0;
 	}
 out:
+	sigma_delta->keep_cs_asserted = false;
+	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 	sigma_delta->bus_locked = false;
 	spi_bus_unlock(sigma_delta->spi->master);
-	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 
 	return ret;
 }
@@ -289,6 +291,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 
 	spi_bus_lock(sigma_delta->spi->master);
 	sigma_delta->bus_locked = true;
+	sigma_delta->keep_cs_asserted = true;
 	reinit_completion(&sigma_delta->completion);
 
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE);
@@ -298,9 +301,6 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	ret = wait_for_completion_interruptible_timeout(
 			&sigma_delta->completion, HZ);
 
-	sigma_delta->bus_locked = false;
-	spi_bus_unlock(sigma_delta->spi->master);
-
 	if (ret == 0)
 		ret = -EIO;
 	if (ret < 0)
@@ -316,7 +316,10 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 		sigma_delta->irq_dis = true;
 	}
 
+	sigma_delta->keep_cs_asserted = false;
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
+	sigma_delta->bus_locked = false;
+	spi_bus_unlock(sigma_delta->spi->master);
 	mutex_unlock(&indio_dev->mlock);
 
 	if (ret)
@@ -353,6 +356,8 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 
 	spi_bus_lock(sigma_delta->spi->master);
 	sigma_delta->bus_locked = true;
+	sigma_delta->keep_cs_asserted = true;
+
 	ret = ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_CONTINUOUS);
 	if (ret)
 		goto err_unlock;
@@ -381,6 +386,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
 		sigma_delta->irq_dis = true;
 	}
 
+	sigma_delta->keep_cs_asserted = false;
 	ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
 
 	sigma_delta->bus_locked = false;
diff --git a/include/linux/iio/adc/ad_sigma_delta.h b/include/linux/iio/adc/ad_sigma_delta.h
index 730ead1a46df6..57c122ae54523 100644
--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -66,6 +66,7 @@ struct ad_sigma_delta {
 	bool			irq_dis;
 
 	bool			bus_locked;
+	bool			keep_cs_asserted;
 
 	uint8_t			comm;
 
-- 
2.20.1

[PATCH 4.19 187/276] iio: hmc5843: fix potential NULL pointer dereferences

[Greg Kroah-Hartman]

[ Upstream commit 536cc27deade8f1ec3c1beefa60d5fbe0f6fcb28 ]

devm_regmap_init_i2c may fail and return NULL. The fix returns
the error when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/magnetometer/hmc5843_i2c.c | 7 ++++++-
 drivers/iio/magnetometer/hmc5843_spi.c | 7 ++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c
index 3de7f4426ac40..86abba5827a25 100644
--- a/drivers/iio/magnetometer/hmc5843_i2c.c
+++ b/drivers/iio/magnetometer/hmc5843_i2c.c
@@ -58,8 +58,13 @@ static const struct regmap_config hmc5843_i2c_regmap_config = {
 static int hmc5843_i2c_probe(struct i2c_client *cli,
 			     const struct i2c_device_id *id)
 {
+	struct regmap *regmap = devm_regmap_init_i2c(cli,
+			&hmc5843_i2c_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
 	return hmc5843_common_probe(&cli->dev,
-			devm_regmap_init_i2c(cli, &hmc5843_i2c_regmap_config),
+			regmap,
 			id->driver_data, id->name);
 }
 
diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c
index 535f03a70d630..79b2b707f90e7 100644
--- a/drivers/iio/magnetometer/hmc5843_spi.c
+++ b/drivers/iio/magnetometer/hmc5843_spi.c
@@ -58,6 +58,7 @@ static const struct regmap_config hmc5843_spi_regmap_config = {
 static int hmc5843_spi_probe(struct spi_device *spi)
 {
 	int ret;
+	struct regmap *regmap;
 	const struct spi_device_id *id = spi_get_device_id(spi);
 
 	spi->mode = SPI_MODE_3;
@@ -67,8 +68,12 @@ stati