LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Raj, Ashok" <ashok.raj@intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: sathyanarayanan.kuppuswamy@linux.intel.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	keith.busch@intel.com, Ashok Raj <ashok.raj@intel.com>
Subject: Re: [PATCH v2 1/5] PCI/ATS: Add PRI support for PCIe VF devices
Date: Thu, 30 May 2019 10:20:55 -0700	[thread overview]
Message-ID: <20190530172055.GB18559@araj-mobl1.jf.intel.com> (raw)
In-Reply-To: <20190530131738.GK28250@google.com>

On Thu, May 30, 2019 at 08:17:38AM -0500, Bjorn Helgaas wrote:
> On Wed, May 29, 2019 at 04:04:27PM -0700, Raj, Ashok wrote:
> > On Wed, May 29, 2019 at 05:57:14PM -0500, Bjorn Helgaas wrote:
> > > On Mon, May 06, 2019 at 10:20:03AM -0700, sathyanarayanan.kuppuswamy@linux.intel.com wrote:
> > > > From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > > > 
> > > > When IOMMU tries to enable PRI for VF device in
> > > > iommu_enable_dev_iotlb(), it always fails because PRI support for PCIe
> > > > VF device is currently broken in PCIE driver. Current implementation
> > > > expects the given PCIe device (PF & VF) to implement PRI capability
> > > > before enabling the PRI support. But this assumption is incorrect. As
> > > > per PCIe spec r4.0, sec 9.3.7.11, all VFs associated with PF can only
> > > > use the Page Request Interface (PRI) of the PF and not implement it.
> > > > Hence we need to create exception for handling the PRI support for PCIe
> > > > VF device.
> > > > 
> > > > Since PRI is shared between PF/VF devices, following rules should apply.
> > > > 
> > > > 1. Enable PRI in VF only if its already enabled in PF.
> > > > 2. When enabling/disabling PRI for VF, instead of configuring the
> > > > registers just increase/decrease the usage count (pri_ref_cnt) of PF.
> > > > 3. Disable PRI in PF only if pr_ref_cnt is zero.
> > > 
> > > s/pr_ref_cnt/pri_ref_cnt/
> > > 
> > > > Cc: Ashok Raj <ashok.raj@intel.com>
> > > > Cc: Keith Busch <keith.busch@intel.com>
> > > > Suggested-by: Ashok Raj <ashok.raj@intel.com>
> > > > Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> > > > ---
> > > >  drivers/pci/ats.c   | 53 +++++++++++++++++++++++++++++++++++++++++++--
> > > >  include/linux/pci.h |  1 +
> > > >  2 files changed, 52 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
> > > > index 97c08146534a..5582e5d83a3f 100644
> > > > --- a/drivers/pci/ats.c
> > > > +++ b/drivers/pci/ats.c
> > > > @@ -181,12 +181,39 @@ int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
> > > >  	u16 control, status;
> > > >  	u32 max_requests;
> > > >  	int pos;
> > > > +	struct pci_dev *pf;
> > > >  
> > > >  	if (WARN_ON(pdev->pri_enabled))
> > > >  		return -EBUSY;
> > > >  
> > > >  	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
> > > > -	if (!pos)
> > > > +
> > > > +	if (pdev->is_virtfn) {
> > > > +		/*
> > > > +		 * Per PCIe r4.0, sec 9.3.7.11, VF must not implement PRI
> > > > +		 * Capability.
> > > > +		 */
> > > > +		if (pos) {
> > > > +			dev_err(&pdev->dev, "VF must not implement PRI");
> > > > +			return -EINVAL;
> > > > +		}
> > > 
> > > This seems gratuitous.  It finds implementation errors, but since we
> > > correctly use the PF here anyway, it doesn't *need* to prevent PRI on
> > > the VF from working.
> > > 
> > > I think you should just have:
> > > 
> > >   if (pdev->is_virtfn) {
> > >     pf = pci_physfn(pdev);
> > >     if (!pf->pri_enabled)
> > >       return -EINVAL;
> > 
> > This would be incorrect. Since if we never did any bind_mm to the PF
> > PRI would not have been enabled. Currently this is done in the IOMMU 
> > driver, and not in the device driver. 
> 
> This is functionally the same as the original patch, only omitting the
> "VF must not implement PRI" check.
> 
> > I suppose we should enable PF capability if its not enabled. Same
> > comment would be applicable for PASID as well.
> 
> Operating on a device other than the one the driver owns opens the
> issue of mutual exclusion and races, so would require careful
> scrutiny.  Are PRI/PASID things that could be *always* enabled for the
> PF at enumeration-time, or do we have to wait until a driver claims
> the VF?  If the latter, are there coordination issues between drivers
> of different VFs?

I suppose that's a reasonably good alternative. You mean we could 
do this when VF's are being created? Otherwise we can do this as its
done today, on demand for all normal PF's. 


Cheers,
Ashok

  reply	other threads:[~2019-05-30 17:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 17:20 [PATCH v2 0/5] Fix PF/VF dependency issues sathyanarayanan.kuppuswamy
2019-05-06 17:20 ` [PATCH v2 1/5] PCI/ATS: Add PRI support for PCIe VF devices sathyanarayanan.kuppuswamy
2019-05-29 22:57   ` Bjorn Helgaas
2019-05-29 23:04     ` Raj, Ashok
2019-05-29 23:24       ` sathyanarayanan kuppuswamy
2019-05-30 13:20         ` Bjorn Helgaas
2019-05-30 13:17       ` Bjorn Helgaas
2019-05-30 17:20         ` Raj, Ashok [this message]
2019-05-30 17:39           ` sathyanarayanan kuppuswamy
2019-05-06 17:20 ` [PATCH v2 2/5] PCI/ATS: Add PASID " sathyanarayanan.kuppuswamy
2019-05-21 23:21   ` sathyanarayanan kuppuswamy
2019-05-29 23:03   ` Bjorn Helgaas
2019-05-06 17:20 ` [PATCH v2 3/5] PCI/ATS: Skip VF ATS initialization if PF does not implement it sathyanarayanan.kuppuswamy
2019-05-06 22:35   ` Elliott, Robert (Servers)
2019-05-30  2:53   ` Bjorn Helgaas
2019-05-06 17:20 ` [PATCH v2 4/5] PCI/ATS: Disable PF/VF ATS service independently sathyanarayanan.kuppuswamy
2019-05-06 17:20 ` [PATCH v2 5/5] PCI: Skip Enhanced Allocation (EA) initalization for VF device sathyanarayanan.kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190530172055.GB18559@araj-mobl1.jf.intel.com \
    --to=ashok.raj@intel.com \
    --cc=helgaas@kernel.org \
    --cc=keith.busch@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --subject='Re: [PATCH v2 1/5] PCI/ATS: Add PRI support for PCIe VF devices' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).