LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Mason Yang <masonccyang@mxic.com.tw>
Cc: broonie@kernel.org, marek.vasut@gmail.com,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	bbrezillon@kernel.org, linux-renesas-soc@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org,
	mark.rutland@arm.com, devicetree@vger.kernel.org,
	juliensu@mxic.com.tw, Simon Horman <horms@verge.net.au>,
	miquel.raynal@bootlin.com
Subject: Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
Date: Mon, 3 Jun 2019 14:02:35 +0100	[thread overview]
Message-ID: <20190603130235.GW4797@dell> (raw)
In-Reply-To: <1558423174-10748-2-git-send-email-masonccyang@mxic.com.tw>

On Tue, 21 May 2019, Mason Yang wrote:

> Add a driver for Renesas R-Car Gen3 RPC-IF MFD
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
>  drivers/mfd/Kconfig             |   9 +++
>  drivers/mfd/Makefile            |   1 +
>  drivers/mfd/renesas-rpc.c       | 125 +++++++++++++++++++++++++++++++++++
>  include/linux/mfd/renesas-rpc.h | 141 ++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 276 insertions(+)
>  create mode 100644 drivers/mfd/renesas-rpc.c
>  create mode 100644 include/linux/mfd/renesas-rpc.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 294d956..cdbde79 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1002,6 +1002,15 @@ config MFD_RDC321X
>  	  southbridge which provides access to GPIOs and Watchdog using the
>  	  southbridge PCI device configuration space.
>  
> +config MFD_RENESAS_RPC
> +	tristate "Renesas R-Car Gen3 RPC-IF controller driver"

Please expand these short-forms, either here or in the help.

> +	select MFD_CORE
> +	depends on ARCH_RENESAS
> +	help
> +	  This supports Renesas R-Car Gen3 RPC-IF controller which provides
> +	  either SPI host or HyperFlash.
> +	  You have to select individual components under the corresponding menu.
> +
>  config MFD_RT5033
>  	tristate "Richtek RT5033 Power Management IC"
>  	depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 52b1a90..459eb2f 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -184,6 +184,7 @@ obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO)	+= intel_quark_i2c_gpio.o
>  obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o
>  obj-$(CONFIG_LPC_ICH)		+= lpc_ich.o
>  obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
> +obj-$(CONFIG_MFD_RENESAS_RPC)	+= renesas-rpc.o
>  obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
>  obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
>  obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
> diff --git a/drivers/mfd/renesas-rpc.c b/drivers/mfd/renesas-rpc.c
> new file mode 100644
> index 0000000..c80c8d1
> --- /dev/null
> +++ b/drivers/mfd/renesas-rpc.c
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
> +// Copyright (C) 2019 Macronix International Co., Ltd.
> +//
> +// R-Car Gen3 RPC-IF MFD driver

Expand this.

> +// Author:
> +//	Mason Yang <masonccyang@mxic.com.tw>
> +//

Why do you have blank commented line here?

By the way, is C++ style throughout the new format?

> +#include <linux/clk.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/renesas-rpc.h>
> +#include <linux/reset.h>

Alphabetical.

> +static const struct mfd_cell rpc_hf_ctlr = {
> +	.name = "rpc-hf",
> +};
> +
> +static const struct mfd_cell rpc_spi_ctlr = {
> +	.name = "rpc-spi",
> +};
> +
> +static const struct regmap_range rpc_mfd_volatile_ranges[] = {
> +	regmap_reg_range(RPC_SMRDR0, RPC_SMRDR1),
> +	regmap_reg_range(RPC_SMWDR0, RPC_SMWDR1),
> +	regmap_reg_range(RPC_CMNSR, RPC_CMNSR),
> +};
> +
> +static const struct regmap_access_table rpc_mfd_volatile_table = {
> +	.yes_ranges	= rpc_mfd_volatile_ranges,
> +	.n_yes_ranges	= ARRAY_SIZE(rpc_mfd_volatile_ranges),
> +};
> +
> +static const struct regmap_config rpc_mfd_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.fast_io = true,
> +	.max_register = RPC_PHYOFFSET2,
> +	.volatile_table = &rpc_mfd_volatile_table,
> +};
> +
> +static int rpc_mfd_probe(struct platform_device *pdev)

Remove the "mfd" from the nomenclature.

> +	struct device_node *flash;
> +	const struct mfd_cell *cell;
> +	struct resource *res;
> +	struct rpc_mfd *rpc;
> +	void __iomem *base;
> +
> +	flash = of_get_next_child(pdev->dev.of_node, NULL);
> +	if (!flash) {
> +		dev_warn(&pdev->dev, "no flash node found\n");
> +		return -ENODEV;
> +	}
> +
> +	if (of_device_is_compatible(flash, "jedec,spi-nor")) {
> +		cell = &rpc_spi_ctlr;
> +	} else if (of_device_is_compatible(flash, "cfi-flash")) {
> +		cell = &rpc_hf_ctlr;
> +	} else {
> +		dev_warn(&pdev->dev, "unknown flash type\n");
> +		return -ENODEV;
> +	}

Are there going to be more children coming?

If not, I'd argue that this is not an MFD.

> +	rpc = devm_kzalloc(&pdev->dev, sizeof(*rpc), GFP_KERNEL);
> +	if (!rpc)
> +		return -ENOMEM;
> +
> +	rpc->clk_rpc = devm_clk_get(&pdev->dev, "rpc");
> +	if (IS_ERR(rpc->clk_rpc))
> +		return PTR_ERR(rpc->clk_rpc);
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base,
> +					    &rpc_mfd_regmap_config);
> +	if (IS_ERR(rpc->regmap)) {
> +		dev_err(&pdev->dev,
> +			"failed to init regmap for rpc-mfd, error %ld\n",
> +			PTR_ERR(rpc->regmap));
> +		return PTR_ERR(rpc->regmap);
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
> +	rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(rpc->dirmap))
> +		rpc->dirmap = NULL;
> +
> +	rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +	if (IS_ERR(rpc->rstc))
> +		return PTR_ERR(rpc->rstc);
> +
> +	platform_set_drvdata(pdev, rpc);
> +
> +	return devm_mfd_add_devices(&pdev->dev, -1, cell, 1, NULL, 0, NULL);
> +}
> +
> +static const struct of_device_id rpc_mfd_of_match[] = {
> +	{ .compatible = "renesas,rcar-gen3-rpc", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, rpc_mfd_of_match);
> +
> +static struct platform_driver rpc_mfd_driver = {
> +	.probe = rpc_mfd_probe,
> +	.driver = {
> +		.name =	"rpc-mfd",
> +		.of_match_table = rpc_mfd_of_match,
> +	},
> +};
> +module_platform_driver(rpc_mfd_driver);
> +
> +MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
> +MODULE_DESCRIPTION("Renesas R-Car Gen3 RPC MFD driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/renesas-rpc.h b/include/linux/mfd/renesas-rpc.h
> new file mode 100644
> index 0000000..bc53d02
> --- /dev/null
> +++ b/include/linux/mfd/renesas-rpc.h
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp.
> +// Copyright (C) 2019 Macronix International Co., Ltd.
> +//
> +// R-Car Gen3 RPC-IF MFD driver
> +//
> +// Author:
> +//	Mason Yang <masonccyang@mxic.com.tw>
> +//
> +
> +#ifndef __MFD_RENESAS_RPC_H
> +#define __MFD_RENESAS_RPC_H
> +
> +#define RPC_CMNCR		0x0000	// R/W
> +#define RPC_CMNCR_MD		BIT(31)
> +#define RPC_CMNCR_SFDE		BIT(24) // undocumented bit but must be set
> +#define RPC_CMNCR_MOIIO3(val)	(((val) & 0x3) << 22)
> +#define RPC_CMNCR_MOIIO2(val)	(((val) & 0x3) << 20)
> +#define RPC_CMNCR_MOIIO1(val)	(((val) & 0x3) << 18)
> +#define RPC_CMNCR_MOIIO0(val)	(((val) & 0x3) << 16)
> +#define RPC_CMNCR_MOIIO_HIZ	(RPC_CMNCR_MOIIO0(3) | RPC_CMNCR_MOIIO1(3) | \
> +				 RPC_CMNCR_MOIIO2(3) | RPC_CMNCR_MOIIO3(3))
> +#define RPC_CMNCR_IO3FV(val)	(((val) & 0x3) << 14) // undocumented
> +#define RPC_CMNCR_IO2FV(val)	(((val) & 0x3) << 12) // undocumented
> +#define RPC_CMNCR_IO0FV(val)	(((val) & 0x3) << 8)
> +#define RPC_CMNCR_IOFV_HIZ	(RPC_CMNCR_IO0FV(3) | RPC_CMNCR_IO2FV(3) | \
> +				 RPC_CMNCR_IO3FV(3))
> +#define RPC_CMNCR_BSZ(val)	(((val) & 0x3) << 0)
> +
> +#define RPC_SSLDR		0x0004	// R/W
> +#define RPC_SSLDR_SPNDL(d)	(((d) & 0x7) << 16)
> +#define RPC_SSLDR_SLNDL(d)	(((d) & 0x7) << 8)
> +#define RPC_SSLDR_SCKDL(d)	(((d) & 0x7) << 0)
> +
> +#define RPC_DRCR		0x000C	// R/W
> +#define RPC_DRCR_SSLN		BIT(24)
> +#define RPC_DRCR_RBURST(v)	((((v) - 1) & 0x1F) << 16)
> +#define RPC_DRCR_RCF		BIT(9)
> +#define RPC_DRCR_RBE		BIT(8)
> +#define RPC_DRCR_SSLE		BIT(0)
> +
> +#define RPC_DRCMR		0x0010	// R/W
> +#define RPC_DRCMR_CMD(c)	(((c) & 0xFF) << 16)
> +#define RPC_DRCMR_OCMD(c)	(((c) & 0xFF) << 0)
> +
> +#define RPC_DREAR		0x0014	// R/W
> +#define RPC_DREAR_EAV(c)	(((c) & 0xf) << 16)
> +#define RPC_DREAR_EAC(c)	(((c) & 0x7) << 0)
> +
> +#define RPC_DROPR		0x0018	// R/W
> +
> +#define RPC_DRENR		0x001C	// R/W
> +#define RPC_DRENR_CDB(o)	(u32)((((o) & 0x3) << 30))
> +#define RPC_DRENR_OCDB(o)	(((o) & 0x3) << 28)
> +#define RPC_DRENR_ADB(o)	(((o) & 0x3) << 24)
> +#define RPC_DRENR_OPDB(o)	(((o) & 0x3) << 20)
> +#define RPC_DRENR_DRDB(o)	(((o) & 0x3) << 16)
> +#define RPC_DRENR_DME		BIT(15)
> +#define RPC_DRENR_CDE		BIT(14)
> +#define RPC_DRENR_OCDE		BIT(12)
> +#define RPC_DRENR_ADE(v)	(((v) & 0xF) << 8)
> +#define RPC_DRENR_OPDE(v)	(((v) & 0xF) << 4)
> +
> +#define RPC_SMCR		0x0020	// R/W
> +#define RPC_SMCR_SSLKP		BIT(8)
> +#define RPC_SMCR_SPIRE		BIT(2)
> +#define RPC_SMCR_SPIWE		BIT(1)
> +#define RPC_SMCR_SPIE		BIT(0)
> +
> +#define RPC_SMCMR		0x0024	// R/W
> +#define RPC_SMCMR_CMD(c)	(((c) & 0xFF) << 16)
> +#define RPC_SMCMR_OCMD(c)	(((c) & 0xFF) << 0)
> +
> +#define RPC_SMADR		0x0028	// R/W
> +#define RPC_SMOPR		0x002C	// R/W
> +#define RPC_SMOPR_OPD3(o)	(((o) & 0xFF) << 24)
> +#define RPC_SMOPR_OPD2(o)	(((o) & 0xFF) << 16)
> +#define RPC_SMOPR_OPD1(o)	(((o) & 0xFF) << 8)
> +#define RPC_SMOPR_OPD0(o)	(((o) & 0xFF) << 0)
> +
> +#define RPC_SMENR		0x0030	// R/W
> +#define RPC_SMENR_CDB(o)	(((o) & 0x3) << 30)
> +#define RPC_SMENR_OCDB(o)	(((o) & 0x3) << 28)
> +#define RPC_SMENR_ADB(o)	(((o) & 0x3) << 24)
> +#define RPC_SMENR_OPDB(o)	(((o) & 0x3) << 20)
> +#define RPC_SMENR_SPIDB(o)	(((o) & 0x3) << 16)
> +#define RPC_SMENR_DME		BIT(15)
> +#define RPC_SMENR_CDE		BIT(14)
> +#define RPC_SMENR_OCDE		BIT(12)
> +#define RPC_SMENR_ADE(v)	(((v) & 0xF) << 8)
> +#define RPC_SMENR_OPDE(v)	(((v) & 0xF) << 4)
> +#define RPC_SMENR_SPIDE(v)	(((v) & 0xF) << 0)
> +
> +#define RPC_SMRDR0		0x0038	// R
> +#define RPC_SMRDR1		0x003C	// R
> +#define RPC_SMWDR0		0x0040	// W
> +#define RPC_SMWDR1		0x0044	// W
> +
> +#define RPC_CMNSR		0x0048	// R
> +#define RPC_CMNSR_SSLF		BIT(1)
> +#define RPC_CMNSR_TEND		BIT(0)
> +
> +#define RPC_DRDMCR		0x0058	// R/W
> +#define RPC_DRDRENR		0x005C	// R/W
> +
> +#define RPC_SMDMCR		0x0060	// R/W
> +#define RPC_SMDMCR_DMCYC(v)	((((v) - 1) & 0x1F) << 0)
> +
> +#define RPC_SMDRENR		0x0064	// R/W
> +#define RPC_SMDRENR_HYPE	(0x7 << 12)
> +#define RPC_SMDRENR_ADDRE	BIT(8)
> +#define RPC_SMDRENR_OPDRE	BIT(4)
> +#define RPC_SMDRENR_SPIDRE	BIT(0)
> +
> +#define RPC_PHYCNT		0x007C	// R/W
> +#define RPC_PHYCNT_CAL		BIT(31)
> +#define PRC_PHYCNT_OCTA_AA	BIT(22)
> +#define PRC_PHYCNT_OCTA_SA	BIT(23)
> +#define PRC_PHYCNT_EXDS		BIT(21)
> +#define RPC_PHYCNT_OCT		BIT(20)
> +#define RPC_PHYCNT_STRTIM(v)	(((v) & 0x7) << 15)
> +#define RPC_PHYCNT_WBUF2	BIT(4)
> +#define RPC_PHYCNT_WBUF		BIT(2)
> +#define RPC_PHYCNT_PHYMEM(v)	(((v) & 0x3) << 0)
> +
> +#define RPC_PHYOFFSET1		0x0080	// R/W
> +#define RPC_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28)
> +#define RPC_PHYOFFSET2		0x0084	// R/W
> +#define RPC_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8)
> +
> +#define RPC_DIRMAP_SIZE		0x4000000
> +
> +struct rpc_mfd {
> +	struct clk *clk_rpc;
> +	void __iomem *dirmap;
> +	struct regmap *regmap;
> +	struct reset_control *rstc;
> +};
> +
> +#endif // __MFD_RENESAS_RPC_H

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2019-06-03 13:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-21  7:19 [PATCH v13 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver Mason Yang
2019-05-21  7:19 ` [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver Mason Yang
2019-06-03 13:02   ` Lee Jones [this message]
2019-06-04  0:52     ` masonccyang
2019-05-21  7:19 ` [PATCH v13 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver Mason Yang
2019-05-21  7:19 ` [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings Mason Yang
2019-05-22 16:50   ` Sergei Shtylyov
2019-05-23  9:16     ` masonccyang
2019-06-03 13:04     ` Lee Jones
2019-06-03 14:55       ` Sergei Shtylyov
2019-06-06  7:40         ` masonccyang
2019-06-18 12:01           ` Marek Vasut
2019-06-19  7:36             ` masonccyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190603130235.GW4797@dell \
    --to=lee.jones@linaro.org \
    --cc=bbrezillon@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=horms@verge.net.au \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=marek.vasut@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=miquel.raynal@bootlin.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --subject='Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).