LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com, wens@csie.org,
linux-sunxi@googlegroups.com
Cc: linux-arm-kernel@lists.infradead.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH v4 4/9] ASoC: sun4i-i2s: Reduce quirks for sun8i-h3
Date: Mon, 3 Jun 2019 19:47:30 +0200 [thread overview]
Message-ID: <20190603174735.21002-5-codekipper@gmail.com> (raw)
In-Reply-To: <20190603174735.21002-1-codekipper@gmail.com>
From: Marcus Cooper <codekipper@gmail.com>
We have a number of flags used to identify the functionality
of the IP block found on the sun8i-h3 and later devices. As it
is only neccessary to identify this new block then replace
these flags with just one.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 23 +++++++----------------
1 file changed, 7 insertions(+), 16 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index e2961d8f6e8c..329883750d6f 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -119,10 +119,7 @@
*
* @has_reset: SoC needs reset deasserted.
* @has_slave_select_bit: SoC has a bit to enable slave mode.
- * @has_fmt_set_lrck_period: SoC requires lrclk period to be set.
- * @has_chcfg: tx and rx slot number need to be set.
- * @has_chsel_tx_chen: SoC requires that the tx channels are enabled.
- * @has_chsel_offset: SoC uses offset for selecting dai operational mode.
+ * @is_h3_i2s_based: This block is similiar to what is found on the h3.
* @reg_offset_txdata: offset of the tx fifo.
* @sun4i_i2s_regmap: regmap config to use.
* @mclk_offset: Value by which mclkdiv needs to be adjusted.
@@ -143,10 +140,7 @@
struct sun4i_i2s_quirks {
bool has_reset;
bool has_slave_select_bit;
- bool has_fmt_set_lrck_period;
- bool has_chcfg;
- bool has_chsel_tx_chen;
- bool has_chsel_offset;
+ bool is_h3_i2s_based;
unsigned int reg_offset_txdata; /* TX FIFO */
const struct regmap_config *sun4i_i2s_regmap;
unsigned int mclk_offset;
@@ -340,7 +334,7 @@ static int sun4i_i2s_set_clk_rate(struct snd_soc_dai *dai,
regmap_field_write(i2s->field_clkdiv_mclk_en, 1);
/* Set sync period */
- if (i2s->variant->has_fmt_set_lrck_period)
+ if (i2s->variant->is_h3_i2s_based)
regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT0_REG,
SUN8I_I2S_FMT0_LRCK_PERIOD_MASK,
SUN8I_I2S_FMT0_LRCK_PERIOD(32));
@@ -366,7 +360,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- if (i2s->variant->has_chcfg) {
+ if (i2s->variant->is_h3_i2s_based) {
regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM(channels));
@@ -386,7 +380,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
regmap_field_write(i2s->field_rxchansel,
SUN4I_I2S_CHAN_SEL(params_channels(params)));
- if (i2s->variant->has_chsel_tx_chen)
+ if (i2s->variant->is_h3_i2s_based)
regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
SUN8I_I2S_TX_CHAN_EN_MASK,
SUN8I_I2S_TX_CHAN_EN(channels));
@@ -449,7 +443,7 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL;
}
- if (i2s->variant->has_chsel_offset) {
+ if (i2s->variant->is_h3_i2s_based) {
/*
* offset being set indicates that we're connected to an i2s
* device, however offset is only used on the sun8i block and
@@ -942,10 +936,7 @@ static const struct sun4i_i2s_quirks sun8i_h3_i2s_quirks = {
.mclk_offset = 1,
.bclk_offset = 2,
.fmt_offset = 3,
- .has_fmt_set_lrck_period = true,
- .has_chcfg = true,
- .has_chsel_tx_chen = true,
- .has_chsel_offset = true,
+ .is_h3_i2s_based = true,
.field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
.field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
.field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
--
2.21.0
next prev parent reply other threads:[~2019-06-03 17:47 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 17:47 [PATCH v4 0/9]ASoC: sun4i-i2s: Updates to the driver codekipper
2019-06-03 17:47 ` [PATCH v4 1/9] ASoC: sun4i-i2s: Fix sun8i tx channel offset mask codekipper
2019-06-04 7:34 ` Maxime Ripard
2019-06-04 7:38 ` [linux-sunxi] " Chen-Yu Tsai
2019-06-04 8:15 ` Code Kipper
2019-06-04 14:58 ` Applied "ASoC: sun4i-i2s: Fix sun8i tx channel offset mask" to the asoc tree Mark Brown
2019-06-03 17:47 ` [PATCH v4 2/9] ASoC: sun4i-i2s: Add offset to RX channel select codekipper
2019-06-04 7:36 ` Maxime Ripard
2019-06-04 7:39 ` [linux-sunxi] " Chen-Yu Tsai
2019-06-04 14:58 ` Applied "ASoC: sun4i-i2s: Add offset to RX channel select" to the asoc tree Mark Brown
2019-06-03 17:47 ` [PATCH v4 3/9] ASoC: sun4i-i2s: Add regmap field to sign extend sample codekipper
2019-06-04 7:43 ` Maxime Ripard
2019-06-04 7:53 ` [linux-sunxi] " Chen-Yu Tsai
2019-06-04 11:46 ` Code Kipper
2019-06-03 17:47 ` codekipper [this message]
2019-06-04 7:46 ` [PATCH v4 4/9] ASoC: sun4i-i2s: Reduce quirks for sun8i-h3 Maxime Ripard
2019-06-04 9:33 ` Code Kipper
2019-06-03 17:47 ` [PATCH v4 5/9] ASoC: sun4i-i2s: Add set_tdm_slot functionality codekipper
2019-06-04 7:49 ` Maxime Ripard
2019-06-03 17:47 ` [PATCH v4 6/9] ASoC: sun4i-i2s: Add multi-lane functionality codekipper
2019-06-04 7:58 ` Maxime Ripard
2019-06-04 8:43 ` Code Kipper
2019-06-04 9:02 ` [linux-sunxi] " Christopher Obbard
2019-06-04 9:38 ` Code Kipper
2019-07-30 17:57 ` Jernej Škrabec
2019-07-31 12:29 ` Maxime Ripard
2019-08-01 5:31 ` Jernej Škrabec
2019-08-06 6:22 ` Chen-Yu Tsai
2019-08-12 10:02 ` Maxime Ripard
2019-06-03 17:47 ` [PATCH v4 7/9] ASoC: sun4i-i2s: Add multichannel functionality codekipper
2019-06-03 17:47 ` [PATCH v4 8/9] ASoc: sun4i-i2s: Add 20, 24 and 32 bit support codekipper
2019-06-04 8:19 ` Maxime Ripard
2019-06-03 17:47 ` [PATCH v4 9/9] ASoC: sun4i-i2s: Adjust regmap settings codekipper
2019-06-04 8:21 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190603174735.21002-5-codekipper@gmail.com \
--to=codekipper@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=be17068@iperbole.bo.it \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=wens@csie.org \
--subject='Re: [PATCH v4 4/9] ASoC: sun4i-i2s: Reduce quirks for sun8i-h3' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).