LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Peter De Schrijver <pdeschrijver@nvidia.com>
To: Dmitry Osipenko <digetx@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Joseph Lo <josephl@nvidia.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	"Prashant Gaikwad" <pgaikwad@nvidia.com>,
	<devicetree@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 1/8] clk: tegra20/30: Add custom EMC clock implementation
Date: Thu, 13 Jun 2019 13:49:45 +0300	[thread overview]
Message-ID: <20190613104945.GJ29894@pdeschrijver-desktop.Nvidia.com> (raw)
In-Reply-To: <20190524172353.29087-2-digetx@gmail.com>

On Fri, May 24, 2019 at 08:23:46PM +0300, Dmitry Osipenko wrote:
> A proper External Memory Controller clock rounding and parent selection
> functionality is required by the EMC drivers. It is not available using
> the generic clock implementation, hence add a custom one. The clock rate
> rounding shall be done by the EMC drivers because they have information
> about available memory timings, so the drivers will have to register a
> callback that will round the requested rate. EMC clock users won't be able
> to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed
> and the callback is set up. The functionality is somewhat similar to the
> clk-emc.c which serves Tegra124+ SoC's, the later HW generations support
> more parent clock sources and the HW configuration and integration with
> the EMC drivers differs a tad from the older gens, hence it's not really
> worth to try to squash everything into a single source file.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/clk/tegra/Makefile          |   2 +
>  drivers/clk/tegra/clk-tegra20-emc.c | 299 ++++++++++++++++++++++++++++
>  drivers/clk/tegra/clk-tegra20.c     |  55 ++---
>  drivers/clk/tegra/clk-tegra30.c     |  38 +++-
>  drivers/clk/tegra/clk.h             |   6 +
>  include/linux/clk/tegra.h           |  14 ++
>  6 files changed, 362 insertions(+), 52 deletions(-)
>  create mode 100644 drivers/clk/tegra/clk-tegra20-emc.c
> 
> diff --git a/drivers/clk/tegra/Makefile b/drivers/clk/tegra/Makefile
> index 4812e45c2214..df966ca06788 100644
> --- a/drivers/clk/tegra/Makefile
> +++ b/drivers/clk/tegra/Makefile
> @@ -17,7 +17,9 @@ obj-y					+= clk-tegra-fixed.o
>  obj-y					+= clk-tegra-super-gen4.o
>  obj-$(CONFIG_TEGRA_CLK_EMC)		+= clk-emc.o
>  obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clk-tegra20.o
> +obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= clk-tegra20-emc.o
>  obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += clk-tegra30.o
> +obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= clk-tegra20-emc.o
>  obj-$(CONFIG_ARCH_TEGRA_114_SOC)	+= clk-tegra114.o
>  obj-$(CONFIG_ARCH_TEGRA_124_SOC)	+= clk-tegra124.o
>  obj-$(CONFIG_TEGRA_CLK_DFLL)		+= clk-tegra124-dfll-fcpu.o
> diff --git a/drivers/clk/tegra/clk-tegra20-emc.c b/drivers/clk/tegra/clk-tegra20-emc.c
> new file mode 100644
> index 000000000000..d971b5425ce3
> --- /dev/null
> +++ b/drivers/clk/tegra/clk-tegra20-emc.c
> @@ -0,0 +1,299 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/bits.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clk/tegra.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +
> +#include "clk.h"
> +
> +#define CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK	GENMASK(7, 0)
> +#define CLK_SOURCE_EMC_2X_CLK_SRC_MASK		GENMASK(31, 30)
> +#define CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT		30
> +
> +#define MC_EMC_SAME_FREQ	BIT(16)
> +#define USE_PLLM_UD		BIT(29)
> +
> +#define EMC_SRC_PLL_M		0
> +#define EMC_SRC_PLL_C		1
> +#define EMC_SRC_PLL_P		2
> +#define EMC_SRC_CLK_M		3
> +
> +static const char * const emc_parent_clk_names[] = {
> +	"pll_m", "pll_c", "pll_p", "clk_m",
> +};
> +
> +struct tegra_clk_emc {
> +	struct clk_hw hw;
> +	void __iomem *reg;
> +	bool mc_same_freq;
> +	bool want_low_jitter;
> +
> +	tegra20_clk_emc_round_cb *round_cb;
> +	void *cb_arg;
> +};
> +
> +static inline struct tegra_clk_emc *to_tegra_clk_emc(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct tegra_clk_emc, hw);
> +}
> +
> +static unsigned long emc_recalc_rate(struct clk_hw *hw,
> +				     unsigned long parent_rate)
> +{
> +	struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> +	u32 val, div;
> +
> +	val = readl_relaxed(emc->reg);
> +	div = val & CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> +
> +	return DIV_ROUND_UP(parent_rate * 2, div + 2);
> +}
> +
> +static u8 emc_get_parent(struct clk_hw *hw)
> +{
> +	struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> +
> +	return readl_relaxed(emc->reg) >> CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +}
> +
> +static int emc_set_parent(struct clk_hw *hw, u8 index)
> +{
> +	struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> +	u32 val, div;
> +
> +	val = readl_relaxed(emc->reg);
> +	val &= ~CLK_SOURCE_EMC_2X_CLK_SRC_MASK;
> +	val |= index << CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +
> +	div = val & CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> +
> +	if (index == EMC_SRC_PLL_M && div == 0 && emc->want_low_jitter)
> +		val |= USE_PLLM_UD;
> +	else
> +		val &= ~USE_PLLM_UD;
> +
> +	if (emc->mc_same_freq)
> +		val |= MC_EMC_SAME_FREQ;
> +	else
> +		val &= ~MC_EMC_SAME_FREQ;
> +
> +	writel_relaxed(val, emc->reg);
> +

I think technically you need a fence_udelay(1) here, but in practice
this is probably not needed because you will poll some EMC register for
the frequency completion anyway. Maybe add a comment about this?

> +	return 0;
> +}
> +
> +static int emc_set_rate(struct clk_hw *hw, unsigned long rate,
> +			unsigned long parent_rate)
> +{
> +	struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> +	unsigned int index;
> +	u32 val, div;
> +
> +	div = div_frac_get(rate, parent_rate, 8, 1, 0);
> +
> +	val = readl_relaxed(emc->reg);
> +	val &= ~CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> +	val |= div;
> +
> +	index = val >> CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +
> +	if (index == EMC_SRC_PLL_M && div == 0 && emc->want_low_jitter)
> +		val |= USE_PLLM_UD;
> +	else
> +		val &= ~USE_PLLM_UD;
> +
> +	if (emc->mc_same_freq)
> +		val |= MC_EMC_SAME_FREQ;
> +	else
> +		val &= ~MC_EMC_SAME_FREQ;
> +
> +	writel_relaxed(val, emc->reg);
> +

Same here.

> +	return 0;
> +}
> +
> +static int emc_set_rate_and_parent(struct clk_hw *hw,
> +				   unsigned long rate,
> +				   unsigned long parent_rate,
> +				   u8 index)
> +{
> +	struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> +	u32 val, div;
> +
> +	div = div_frac_get(rate, parent_rate, 8, 1, 0);
> +
> +	val = readl_relaxed(emc->reg);
> +
> +	val &= ~CLK_SOURCE_EMC_2X_CLK_SRC_MASK;
> +	val |= index << CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +
> +	val &= ~CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> +	val |= div;
> +
> +	if (index == EMC_SRC_PLL_M && div == 0 && emc->want_low_jitter)
> +		val |= USE_PLLM_UD;
> +	else
> +		val &= ~USE_PLLM_UD;
> +
> +	if (emc->mc_same_freq)
> +		val |= MC_EMC_SAME_FREQ;
> +	else
> +		val &= ~MC_EMC_SAME_FREQ;
> +
> +	writel_relaxed(val, emc->reg);
> +

And here.

> +	return 0;
> +}

Peter.

  reply	other threads:[~2019-06-13 15:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-24 17:23 [PATCH v3 0/8] memory: tegra: Introduce Tegra30 EMC driver Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 1/8] clk: tegra20/30: Add custom EMC clock implementation Dmitry Osipenko
2019-06-13 10:49   ` Peter De Schrijver [this message]
2019-06-13 12:14     ` Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 2/8] memory: tegra20-emc: Drop setting EMC rate to max on probe Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 3/8] memory: tegra20-emc: Adapt for clock driver changes Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 4/8] memory: tegra20-emc: Include io.h instead of iopoll.h Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 5/8] memory: tegra20-emc: Replace clk_get_sys with devm_clk_get Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 6/8] dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 7/8] memory: tegra: Introduce Tegra30 EMC driver Dmitry Osipenko
2019-05-24 17:23 ` [PATCH v3 8/8] ARM: dts: tegra30: Add External Memory Controller node Dmitry Osipenko
2019-06-11  0:01 ` [PATCH v3 0/8] memory: tegra: Introduce Tegra30 EMC driver Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190613104945.GJ29894@pdeschrijver-desktop.Nvidia.com \
    --to=pdeschrijver@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pgaikwad@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH v3 1/8] clk: tegra20/30: Add custom EMC clock implementation' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).