LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrew Jeffery <andrew@aj.id.au>
To: linux-mmc@vger.kernel.org
Cc: Andrew Jeffery <andrew@aj.id.au>,
	ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
	joel@jms.id.au, adrian.hunter@intel.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	ryanchen.aspeed@gmail.com
Subject: [PATCH v2 1/2] dt-bindings: mmc: Document Aspeed SD controller
Date: Fri, 12 Jul 2019 13:02:13 +0930	[thread overview]
Message-ID: <20190712033214.24713-2-andrew@aj.id.au> (raw)
In-Reply-To: <20190712033214.24713-1-andrew@aj.id.au>

The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
data bus if only a single slot is enabled.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
In v2:

* Rename to aspeed,sdhci.yaml
* Rename sd-controller compatible
* Add `maxItems: 1` for reg properties
* Move sdhci subnode description to patternProperties
* Drop sdhci compatible requirement
* #address-cells and #size-cells are required
* Prevent additional properties
* Implement explicit ranges in example
* Remove slot property

 .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml

diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
new file mode 100644
index 000000000000..67a691c3348c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED SD/SDIO/eMMC Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Ryan Chen <ryanchen.aspeed@gmail.com>
+
+description: |+
+  The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
+  Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
+  only a single slot is enabled.
+
+  The two slots are supported by a common configuration area. As the SDHCIs for
+  the slots are dependent on the common configuration area, they are described
+  as child nodes.
+
+properties:
+  compatible:
+    enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ]
+  reg:
+    maxItems: 1
+    description: Common configuration registers
+  ranges: true
+  clocks:
+    maxItems: 1
+    description: The SD/SDIO controller clock gate
+
+patternProperties:
+  "^sdhci@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum: [ aspeed,ast2400-sdhci, aspeed,ast2500-sdhci ]
+      reg:
+        maxItems: 1
+        description: The SDHCI registers
+      clocks:
+        maxItems: 1
+        description: The SD bus clock
+      interrupts:
+        maxItems: 1
+        description: The SD interrupt shared between both slots
+    required:
+      - compatible
+      - reg
+      - clocks
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sdc@1e740000 {
+            compatible = "aspeed,ast2500-sd-controller";
+            reg = <0x1e740000 0x100>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x1e740000 0x10000>;
+            clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+
+            sdhci0: sdhci@100 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x100 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+
+            sdhci1: sdhci@200 {
+                    compatible = "aspeed,ast2500-sdhci";
+                    reg = <0x200 0x100>;
+                    interrupts = <26>;
+                    sdhci,auto-cmd12;
+                    clocks = <&syscon ASPEED_CLK_SDIO>;
+            };
+    };
-- 
2.20.1


  reply	other threads:[~2019-07-12  3:32 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-12  3:32 [PATCH v2 0/2] mmc: Add support for the ASPEED " Andrew Jeffery
2019-07-12  3:32 ` Andrew Jeffery [this message]
2019-07-12 13:03   ` [PATCH v2 1/2] dt-bindings: mmc: Document Aspeed " Rob Herring
2019-07-12 13:10   ` Maxime Ripard
2019-07-15  2:30     ` Andrew Jeffery
2019-07-15 13:26       ` Rob Herring
2019-07-15 22:16   ` Rob Herring
2019-07-16  0:36     ` Andrew Jeffery
2019-07-16 14:57       ` Rob Herring
2019-07-17  3:57         ` Andrew Jeffery
2019-07-17 13:43           ` Rob Herring
2019-07-18  1:49             ` Andrew Jeffery
2019-07-12  3:32 ` [PATCH v2 2/2] mmc: Add support for the ASPEED " Andrew Jeffery
2019-07-25 13:18   ` Adrian Hunter
2019-07-26  0:52     ` Andrew Jeffery
2019-07-26  5:56       ` Adrian Hunter
2019-07-26  6:47         ` Andrew Jeffery

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190712033214.24713-2-andrew@aj.id.au \
    --to=andrew@aj.id.au \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=ryanchen.aspeed@gmail.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH v2 1/2] dt-bindings: mmc: Document Aspeed SD controller' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).