LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup
@ 2019-07-17  2:39 Ben Chuang
  2019-07-24  7:19 ` Ulf Hansson
  0 siblings, 1 reply; 5+ messages in thread
From: Ben Chuang @ 2019-07-17  2:39 UTC (permalink / raw)
  To: adrian.hunter, ulf.hansson; +Cc: linux-kernel, linux-mmc, johnsonm, Ben Chuang

The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
setup as part of the internal clock setup as described in 3.2.1 Internal
Clock Setup Sequence of SD Host Controller Simplified Specification
Version 4.20.  This changes the timeouts to the new specification of
150ms for each step and is documented as safe for "prior versions which
do not support PLL Enable."

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
---
 drivers/mmc/host/sdhci.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 59acf8e3331e..fd684d7a5f15 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,15 +1636,11 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
        clk |= SDHCI_CLOCK_INT_EN;
        sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

-       /* Wait max 20 ms */
-       timeout = ktime_add_ms(ktime_get(), 20);
-       while (1) {
-               bool timedout = ktime_after(ktime_get(), timeout);
-
-               clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
-               if (clk & SDHCI_CLOCK_INT_STABLE)
-                       break;
-               if (timedout) {
+       /* Wait max 150 ms */
+       timeout = ktime_add_ms(ktime_get(), 150);
+       while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+               & SDHCI_CLOCK_INT_STABLE)) {
+               if (ktime_after(ktime_get(), timeout)) {
                        pr_err("%s: Internal clock never stabilised.\n",
                               mmc_hostname(host->mmc));
                        sdhci_dumpregs(host);
@@ -1653,8 +1649,27 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
                udelay(10);
        }

+       clk |= SDHCI_CLOCK_PLL_EN;
+       clk &= ~SDHCI_CLOCK_INT_STABLE;
+       sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+       /* Wait max 150 ms */
+       timeout = ktime_add_ms(ktime_get(), 150);
+       while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+               & SDHCI_CLOCK_INT_STABLE)) {
+               if (ktime_after(ktime_get(), timeout)) {
+                       pr_err("%s: PLL clock never stabilised.\n",
+                              mmc_hostname(host->mmc));
+                       sdhci_dumpregs(host);
+                       return;
+               }
+               udelay(10);
+       }
+
        clk |= SDHCI_CLOCK_CARD_EN;
        sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+       mdelay(1);
 }
 EXPORT_SYMBOL_GPL(sdhci_enable_clk);

--
2.22.0

________________________________

Genesys Logic Email Confidentiality Notice:
This mail and any attachments may contain information that is confidential, proprietary, privileged or otherwise protected by law. The mail is intended solely for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this mail, you are not authorized to read, print, copy or disseminate this mail.

If you have received this email in error, please notify us immediately by reply email and immediately delete this message and any attachments from your system. Please be noted that any unauthorized use, dissemination, distribution or copying of this email is strictly prohibited.
________________________________

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup
  2019-07-17  2:39 [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup Ben Chuang
@ 2019-07-24  7:19 ` Ulf Hansson
  2019-07-25  1:47   ` Michael K. Johnson
  2019-07-25 11:15   ` Michael K. Johnson
  0 siblings, 2 replies; 5+ messages in thread
From: Ulf Hansson @ 2019-07-24  7:19 UTC (permalink / raw)
  To: Ben Chuang; +Cc: Adrian Hunter, Linux Kernel Mailing List, linux-mmc, johnsonm

On Wed, 17 Jul 2019 at 04:39, Ben Chuang <ben.chuang@genesyslogic.com.tw> wrote:
>
> The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
> setup as part of the internal clock setup as described in 3.2.1 Internal
> Clock Setup Sequence of SD Host Controller Simplified Specification
> Version 4.20.  This changes the timeouts to the new specification of
> 150ms for each step and is documented as safe for "prior versions which
> do not support PLL Enable."
>
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
> ---
>  drivers/mmc/host/sdhci.c | 33 ++++++++++++++++++++++++---------
>  1 file changed, 24 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 59acf8e3331e..fd684d7a5f15 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1636,15 +1636,11 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>         clk |= SDHCI_CLOCK_INT_EN;
>         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>
> -       /* Wait max 20 ms */
> -       timeout = ktime_add_ms(ktime_get(), 20);
> -       while (1) {
> -               bool timedout = ktime_after(ktime_get(), timeout);
> -
> -               clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> -               if (clk & SDHCI_CLOCK_INT_STABLE)
> -                       break;
> -               if (timedout) {
> +       /* Wait max 150 ms */
> +       timeout = ktime_add_ms(ktime_get(), 150);
> +       while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> +               & SDHCI_CLOCK_INT_STABLE)) {
> +               if (ktime_after(ktime_get(), timeout)) {
>                         pr_err("%s: Internal clock never stabilised.\n",
>                                mmc_hostname(host->mmc));
>                         sdhci_dumpregs(host);
> @@ -1653,8 +1649,27 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>                 udelay(10);

This looks like it could be changed to an usleep_range(), perhaps an
additional change on top?

>         }
>
> +       clk |= SDHCI_CLOCK_PLL_EN;
> +       clk &= ~SDHCI_CLOCK_INT_STABLE;
> +       sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +       /* Wait max 150 ms */
> +       timeout = ktime_add_ms(ktime_get(), 150);
> +       while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> +               & SDHCI_CLOCK_INT_STABLE)) {
> +               if (ktime_after(ktime_get(), timeout)) {
> +                       pr_err("%s: PLL clock never stabilised.\n",
> +                              mmc_hostname(host->mmc));
> +                       sdhci_dumpregs(host);
> +                       return;
> +               }
> +               udelay(10);

Ditto.

> +       }
> +
>         clk |= SDHCI_CLOCK_CARD_EN;
>         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +       mdelay(1);

This is new, maybe add a comment and change to usleep_range().

>  }
>  EXPORT_SYMBOL_GPL(sdhci_enable_clk);
>
> --
> 2.22.0
>
> ________________________________
>
> Genesys Logic Email Confidentiality Notice:
> This mail and any attachments may contain information that is confidential, proprietary, privileged or otherwise protected by law. The mail is intended solely for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this mail, you are not authorized to read, print, copy or disseminate this mail.
>
> If you have received this email in error, please notify us immediately by reply email and immediately delete this message and any attachments from your system. Please be noted that any unauthorized use, dissemination, distribution or copying of this email is strictly prohibited.
> ________________________________

If you want me to apply the patch, you have to drop the above notice.

Kind regards
Uffe

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup
  2019-07-24  7:19 ` Ulf Hansson
@ 2019-07-25  1:47   ` Michael K. Johnson
  2019-07-25 11:15   ` Michael K. Johnson
  1 sibling, 0 replies; 5+ messages in thread
From: Michael K. Johnson @ 2019-07-25  1:47 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Ben Chuang, Adrian Hunter, Linux Kernel Mailing List, linux-mmc

On Wed, Jul 24, 2019 at 09:19:30AM +0200, Ulf Hansson wrote:
> > Genesys Logic Email Confidentiality Notice:
> > This mail and any attachments may contain information that is confidential, proprietary, privileged or otherwise protected by law. The mail is intended solely for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this mail, you are not authorized to read, print, copy or disseminate this mail.
> >
> > If you have received this email in error, please notify us immediately by reply email and immediately delete this message and any attachments from your system. Please be noted that any unauthorized use, dissemination, distribution or copying of this email is strictly prohibited.
> > ________________________________
> 
> If you want me to apply the patch, you have to drop the above notice.

Ben is the primary author and can respond on the requested code
changes; I helped break the work apart into the two patches and
did small changes to improve the code.

Ben's SMTP server at Genesys auto-appends the confidentiality
notice without giving him the opportunity to control it.  I have
the patch set co-developed in a shared Git repository without the
automated email addition ever applied, so when Ben works out the
substantial changes, I can send final patches to the list without
the mail-mangling robot getting in the way.  He'll still be the
primary author.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup
  2019-07-24  7:19 ` Ulf Hansson
  2019-07-25  1:47   ` Michael K. Johnson
@ 2019-07-25 11:15   ` Michael K. Johnson
  2019-07-25 11:21     ` Ulf Hansson
  1 sibling, 1 reply; 5+ messages in thread
From: Michael K. Johnson @ 2019-07-25 11:15 UTC (permalink / raw)
  To: Ulf Hansson
  Cc: Ben Chuang, Adrian Hunter, Linux Kernel Mailing List, linux-mmc

(Working around Ben's SMTP server noise, responding on his behalf...)

On Wed, Jul 24, 2019 at 09:19:30AM +0200, Ulf Hansson wrote:
> This looks like it could be changed to an usleep_range(), perhaps an
> additional change on top?
...
> Ditto.

In both cases yes, changed.

> > +       mdelay(1);
> 
> This is new, maybe add a comment and change to usleep_range().

Entirely removed.

New patch attached for any further review, I can re-send the patchset
properly without the notice for merge when you're happy with it.


The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
setup as part of the internal clock setup as described in 3.2.1 Internal
Clock Setup Sequence of SD Host Controller Simplified Specification
Version 4.20.  This changes the timeouts to the new specification of
150ms for each step and is documented as safe for "prior versions which
do not support PLL Enable."

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Michael K Johnson <johnsonm@danlj.org>

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 59acf8e3331e..14957578bf2e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1636,8 +1636,8 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 	clk |= SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
-	/* Wait max 20 ms */
-	timeout = ktime_add_ms(ktime_get(), 20);
+	/* Wait max 150 ms */
+	timeout = ktime_add_ms(ktime_get(), 150);
 	while (1) {
 		bool timedout = ktime_after(ktime_get(), timeout);
 
@@ -1650,7 +1650,28 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 			sdhci_dumpregs(host);
 			return;
 		}
-		udelay(10);
+		usleep_range(10,15);
+	}
+
+	clk |= SDHCI_CLOCK_PLL_EN;
+	clk &= ~SDHCI_CLOCK_INT_STABLE;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 150 ms */
+	timeout = ktime_add_ms(ktime_get(), 150);
+	while (1) {
+		bool timedout = ktime_after(ktime_get(), timeout);
+
+		clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+		if (clk & SDHCI_CLOCK_INT_STABLE)
+			break;
+		if (timedout) {
+			pr_err("%s: PLL clock never stabilised.\n",
+			       mmc_hostname(host->mmc));
+			sdhci_dumpregs(host);
+			return;
+		}
+		usleep_range(10,15);
 	}
 
 	clk |= SDHCI_CLOCK_CARD_EN;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 199712e7adbb..72601a4d2e95 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -114,6 +114,7 @@
 #define  SDHCI_DIV_HI_MASK	0x300
 #define  SDHCI_PROG_CLOCK_MODE	0x0020
 #define  SDHCI_CLOCK_CARD_EN	0x0004
+#define  SDHCI_CLOCK_PLL_EN	0x0008
 #define  SDHCI_CLOCK_INT_STABLE	0x0002
 #define  SDHCI_CLOCK_INT_EN	0x0001
 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup
  2019-07-25 11:15   ` Michael K. Johnson
@ 2019-07-25 11:21     ` Ulf Hansson
  0 siblings, 0 replies; 5+ messages in thread
From: Ulf Hansson @ 2019-07-25 11:21 UTC (permalink / raw)
  To: Michael K. Johnson
  Cc: Ben Chuang, Adrian Hunter, Linux Kernel Mailing List, linux-mmc

On Thu, 25 Jul 2019 at 13:15, Michael K. Johnson <johnsonm@danlj.org> wrote:
>
> (Working around Ben's SMTP server noise, responding on his behalf...)
>
> On Wed, Jul 24, 2019 at 09:19:30AM +0200, Ulf Hansson wrote:
> > This looks like it could be changed to an usleep_range(), perhaps an
> > additional change on top?
> ...
> > Ditto.
>
> In both cases yes, changed.
>
> > > +       mdelay(1);
> >
> > This is new, maybe add a comment and change to usleep_range().
>
> Entirely removed.
>
> New patch attached for any further review, I can re-send the patchset
> properly without the notice for merge when you're happy with it.

I need an ack from Adrian, but it's probably best to resend anyway.

Kind regards
Uffe

>
>
> The GL9750 and GL9755 chipsets, and possibly others, require PLL Enable
> setup as part of the internal clock setup as described in 3.2.1 Internal
> Clock Setup Sequence of SD Host Controller Simplified Specification
> Version 4.20.  This changes the timeouts to the new specification of
> 150ms for each step and is documented as safe for "prior versions which
> do not support PLL Enable."
>
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
> Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 59acf8e3331e..14957578bf2e 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1636,8 +1636,8 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>         clk |= SDHCI_CLOCK_INT_EN;
>         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>
> -       /* Wait max 20 ms */
> -       timeout = ktime_add_ms(ktime_get(), 20);
> +       /* Wait max 150 ms */
> +       timeout = ktime_add_ms(ktime_get(), 150);
>         while (1) {
>                 bool timedout = ktime_after(ktime_get(), timeout);
>
> @@ -1650,7 +1650,28 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>                         sdhci_dumpregs(host);
>                         return;
>                 }
> -               udelay(10);
> +               usleep_range(10,15);
> +       }
> +
> +       clk |= SDHCI_CLOCK_PLL_EN;
> +       clk &= ~SDHCI_CLOCK_INT_STABLE;
> +       sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +       /* Wait max 150 ms */
> +       timeout = ktime_add_ms(ktime_get(), 150);
> +       while (1) {
> +               bool timedout = ktime_after(ktime_get(), timeout);
> +
> +               clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +               if (clk & SDHCI_CLOCK_INT_STABLE)
> +                       break;
> +               if (timedout) {
> +                       pr_err("%s: PLL clock never stabilised.\n",
> +                              mmc_hostname(host->mmc));
> +                       sdhci_dumpregs(host);
> +                       return;
> +               }
> +               usleep_range(10,15);
>         }
>
>         clk |= SDHCI_CLOCK_CARD_EN;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 199712e7adbb..72601a4d2e95 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -114,6 +114,7 @@
>  #define  SDHCI_DIV_HI_MASK     0x300
>  #define  SDHCI_PROG_CLOCK_MODE 0x0020
>  #define  SDHCI_CLOCK_CARD_EN   0x0004
> +#define  SDHCI_CLOCK_PLL_EN    0x0008
>  #define  SDHCI_CLOCK_INT_STABLE        0x0002
>  #define  SDHCI_CLOCK_INT_EN    0x0001
>

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-07-25 11:22 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-17  2:39 [PATCH 1/2] mmc: sdhci: Add PLL Enable support to internal clock setup Ben Chuang
2019-07-24  7:19 ` Ulf Hansson
2019-07-25  1:47   ` Michael K. Johnson
2019-07-25 11:15   ` Michael K. Johnson
2019-07-25 11:21     ` Ulf Hansson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).