LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <kamel.bouhara@bootlin.com>, <wsa@the-dreams.de>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <robh@kernel.org>,
<peda@axentia.se>, <linux@armlinux.org.uk>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: [PATCH v3 2/6] i2c: at91: implement i2c bus recovery
Date: Wed, 15 Jan 2020 13:54:18 +0200 [thread overview]
Message-ID: <20200115115422.17097-3-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200115115422.17097-1-codrin.ciubotariu@microchip.com>
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
Implement i2c bus recovery when slaves devices might hold SDA low.
In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
until the slave release SDA.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
Changes in v3:
- removed unnecessary condition from info print;
- removed unneded declarations;
Changes in v2:
- called i2c_recover_bus() after an error occurs, if SDA is down;
- release gpios if recovery information is incomplete;
drivers/i2c/busses/i2c-at91-master.c | 78 ++++++++++++++++++++++++++++
drivers/i2c/busses/i2c-at91.h | 4 ++
2 files changed, 82 insertions(+)
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 7a862e00b475..0aba51a7df32 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -18,11 +18,13 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/platform_data/dma-atmel.h>
#include <linux/pm_runtime.h>
@@ -478,6 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
unsigned long time_left;
bool has_unre_flag = dev->pdata->has_unre_flag;
bool has_alt_cmd = dev->pdata->has_alt_cmd;
+ struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
/*
* WARNING: the TXCOMP bit in the Status Register is NOT a clear on
@@ -637,6 +640,13 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
at91_twi_write(dev, AT91_TWI_CR,
AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
}
+
+ if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
+ dev_dbg(dev->dev,
+ "SDA is down; clear bus using gpio\n");
+ i2c_recover_bus(&dev->adapter);
+ }
+
return ret;
}
@@ -806,6 +816,70 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
return ret;
}
+static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
+{
+ struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+ pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
+}
+
+static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
+{
+ struct at91_twi_dev *dev = i2c_get_adapdata(adap);
+
+ pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
+}
+
+static int at91_init_twi_recovery_info(struct platform_device *pdev,
+ struct at91_twi_dev *dev)
+{
+ struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
+
+ dev->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
+ dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
+ return PTR_ERR(dev->pinctrl);
+ }
+
+ dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
+ "gpio");
+ rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+ if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
+ GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ if (IS_ERR(rinfo->sda_gpiod) ||
+ IS_ERR(rinfo->scl_gpiod) ||
+ IS_ERR(dev->pinctrl_pins_default) ||
+ IS_ERR(dev->pinctrl_pins_gpio)) {
+ dev_info(&pdev->dev, "recovery information incomplete\n");
+ if (!IS_ERR(rinfo->sda_gpiod)) {
+ gpiod_put(rinfo->sda_gpiod);
+ rinfo->sda_gpiod = NULL;
+ }
+ if (!IS_ERR(rinfo->scl_gpiod)) {
+ gpiod_put(rinfo->scl_gpiod);
+ rinfo->scl_gpiod = NULL;
+ }
+ return -EINVAL;
+ }
+
+ dev_info(&pdev->dev, "using scl, sda for recovery\n");
+
+ rinfo->prepare_recovery = at91_prepare_twi_recovery;
+ rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
+ rinfo->recover_bus = i2c_generic_scl_recovery;
+ dev->adapter.bus_recovery_info = rinfo;
+
+ return 0;
+}
+
int at91_twi_probe_master(struct platform_device *pdev,
u32 phy_addr, struct at91_twi_dev *dev)
{
@@ -838,6 +912,10 @@ int at91_twi_probe_master(struct platform_device *pdev,
"i2c-analog-filter");
at91_calc_twi_clock(dev);
+ rc = at91_init_twi_recovery_info(pdev, dev);
+ if (rc == -EPROBE_DEFER)
+ return rc;
+
dev->adapter.algo = &at91_twi_algorithm;
dev->adapter.quirks = &at91_twi_quirks;
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 977a67bc0f88..f57a6cab96b4 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -151,6 +151,10 @@ struct at91_twi_dev {
u32 fifo_size;
struct at91_twi_dma dma;
bool slave_detected;
+ struct i2c_bus_recovery_info rinfo;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pinctrl_pins_default;
+ struct pinctrl_state *pinctrl_pins_gpio;
#ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
unsigned smr;
struct i2c_client *slave;
--
2.20.1
next prev parent reply other threads:[~2020-01-15 11:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 11:54 [PATCH v3 0/6] i2c bus recovery for Microchip SoCs Codrin Ciubotariu
2020-01-15 11:54 ` [PATCH v3 1/6] dt-bindings: i2c: at91: document optional bus recovery properties Codrin Ciubotariu
2020-01-27 8:49 ` Ludovic Desroches
2020-02-22 11:33 ` Wolfram Sang
2020-01-15 11:54 ` Codrin Ciubotariu [this message]
2020-01-27 8:50 ` [PATCH v3 2/6] i2c: at91: implement i2c bus recovery Ludovic Desroches
2020-02-22 11:33 ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 3/6] i2c: at91: Send bus clear command if SDA is down Codrin Ciubotariu
2020-01-27 8:54 ` Ludovic Desroches
2020-02-22 11:44 ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 4/6] ARM: at91/dt: sama5d3: add i2c gpio pinctrl Codrin Ciubotariu
2020-01-27 8:55 ` Ludovic Desroches
2020-01-15 11:54 ` [PATCH v3 5/6] ARM: at91/dt: sama5d4: " Codrin Ciubotariu
2020-01-27 8:56 ` Ludovic Desroches
2020-01-15 11:54 ` [PATCH v3 6/6] ARM: at91/dt: sama5d2: " Codrin Ciubotariu
2020-01-27 8:57 ` Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115115422.17097-3-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
--subject='Re: [PATCH v3 2/6] i2c: at91: implement i2c bus recovery' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).