LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <kamel.bouhara@bootlin.com>, <wsa@the-dreams.de>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <robh@kernel.org>,
<peda@axentia.se>, <linux@armlinux.org.uk>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Subject: [PATCH v3 6/6] ARM: at91/dt: sama5d2: add i2c gpio pinctrl
Date: Wed, 15 Jan 2020 13:54:22 +0200 [thread overview]
Message-ID: <20200115115422.17097-7-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200115115422.17097-1-codrin.ciubotariu@microchip.com>
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
Add the i2c gpio pinctrls to support the i2c bus recovery
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[codrin.ciubotariu@microchip.com: removed gpio pull-ups]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
Changes in v3:
- removed gpio pull-ups;
Changes in v2:
- new patch;
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 33 +++++++++++++++++++--
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 33 +++++++++++++++++++--
2 files changed, 60 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index ba7f3e646c26..1c24ac8019ba 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -180,8 +180,11 @@
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -198,8 +201,11 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx0_default>;
+ pinctrl-1 = <&pinctrl_flx0_gpio>;
+ sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
atmel,fifo-size = <16>;
status = "okay";
};
@@ -226,8 +232,11 @@
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
status = "okay";
at24@50 {
@@ -244,18 +253,36 @@
bias-disable;
};
+ pinctrl_flx0_gpio: flx0_gpio {
+ pinmux = <PIN_PB28__GPIO>,
+ <PIN_PB29__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
bias-disable;
};
+ pinctrl_i2c0_gpio: i2c0_gpio {
+ pinmux = <PIN_PD21__GPIO>,
+ <PIN_PD22__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PC6__TWD1>,
<PIN_PC7__TWCK1>;
bias-disable;
};
+ pinctrl_i2c1_gpio: i2c1_gpio {
+ pinmux = <PIN_PC6__GPIO>,
+ <PIN_PC7__GPIO>;
+ bias-disable;
+ };
+
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PA10__GPIO>;
bias-pull-up;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 9d0a7fbea725..055ee53e4773 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -129,8 +129,11 @@
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
i2c-sda-hold-time-ns = <350>;
status = "okay";
@@ -331,8 +334,11 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx4_default>;
+ pinctrl-1 = <&pinctrl_flx4_gpio>;
+ sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
atmel,fifo-size = <16>;
i2c-analog-filter;
i2c-digital-filter;
@@ -343,11 +349,14 @@
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
status = "okay";
at24@54 {
@@ -441,18 +450,36 @@
bias-disable;
};
+ pinctrl_flx4_gpio: flx4_gpio {
+ pinmux = <PIN_PD12__GPIO>,
+ <PIN_PD13__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
bias-disable;
};
+ pinctrl_i2c0_gpio: i2c0_gpio {
+ pinmux = <PIN_PD21__GPIO>,
+ <PIN_PD22__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD4__TWD1>,
<PIN_PD5__TWCK1>;
bias-disable;
};
+ pinctrl_i2c1_gpio: i2c1_gpio {
+ pinmux = <PIN_PD4__GPIO>,
+ <PIN_PD5__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2s0_default: i2s0_default {
pinmux = <PIN_PC1__I2SC0_CK>,
<PIN_PC2__I2SC0_MCK>,
--
2.20.1
next prev parent reply other threads:[~2020-01-15 11:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 11:54 [PATCH v3 0/6] i2c bus recovery for Microchip SoCs Codrin Ciubotariu
2020-01-15 11:54 ` [PATCH v3 1/6] dt-bindings: i2c: at91: document optional bus recovery properties Codrin Ciubotariu
2020-01-27 8:49 ` Ludovic Desroches
2020-02-22 11:33 ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 2/6] i2c: at91: implement i2c bus recovery Codrin Ciubotariu
2020-01-27 8:50 ` Ludovic Desroches
2020-02-22 11:33 ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 3/6] i2c: at91: Send bus clear command if SDA is down Codrin Ciubotariu
2020-01-27 8:54 ` Ludovic Desroches
2020-02-22 11:44 ` Wolfram Sang
2020-01-15 11:54 ` [PATCH v3 4/6] ARM: at91/dt: sama5d3: add i2c gpio pinctrl Codrin Ciubotariu
2020-01-27 8:55 ` Ludovic Desroches
2020-01-15 11:54 ` [PATCH v3 5/6] ARM: at91/dt: sama5d4: " Codrin Ciubotariu
2020-01-27 8:56 ` Ludovic Desroches
2020-01-15 11:54 ` Codrin Ciubotariu [this message]
2020-01-27 8:57 ` [PATCH v3 6/6] ARM: at91/dt: sama5d2: " Ludovic Desroches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115115422.17097-7-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
--subject='Re: [PATCH v3 6/6] ARM: at91/dt: sama5d2: add i2c gpio pinctrl' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).