Re: [PATCH v3 3/6] i2c: at91: Send bus clear command if SDA is down

[Ludovic Desroches <ludovic.desroches@microchip.com>]

On Wed, Jan 15, 2020 at 01:54:19PM +0200, Codrin Ciubotariu wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> After a transfer timeout, some faulty I2C slave devices might hold down
> the SDA pin. We can generate a bus clear command, hoping that the slave
> might release the pins.
> If the CLEAR command is not supported, we will use gpio recovery, if
> available, to reset the bus.
> 
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

I still have issue to apply it even if the context seems correct.
Sometimes git am is picky... so

Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

> ---
> 
> Changes in v3:
>  - rebased on top of i2c/for-next;
>   - remove unnecessary initializations with false;
>  - replaced SCL with SDA in title and commit message;
>  - updated commit message;
> 
> Changes in v2:
>  - use CLEAR command only if SDA is down; update patch subject to
>    reflect this;
>  - CLEAR command is no longer used for sama5d2, only sam9x60;
> 
>  drivers/i2c/busses/i2c-at91-core.c   |  2 ++
>  drivers/i2c/busses/i2c-at91-master.c | 32 +++++++++++++++++++++++-----
>  drivers/i2c/busses/i2c-at91.h        |  7 +++++-
>  3 files changed, 35 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
> index 3da1a8acecb5..e14edd236108 100644
> --- a/drivers/i2c/busses/i2c-at91-core.c
> +++ b/drivers/i2c/busses/i2c-at91-core.c
> @@ -131,6 +131,7 @@ static struct at91_twi_pdata sama5d2_config = {
>         .has_dig_filtr = true,
>         .has_adv_dig_filtr = true,
>         .has_ana_filtr = true,
> +       .has_clear_cmd = false, /* due to errata, CLEAR cmd is not working */
>  };
> 
>  static struct at91_twi_pdata sam9x60_config = {
> @@ -142,6 +143,7 @@ static struct at91_twi_pdata sam9x60_config = {
>         .has_dig_filtr = true,
>         .has_adv_dig_filtr = true,
>         .has_ana_filtr = true,
> +       .has_clear_cmd = true,
>  };
> 
>  static const struct of_device_id atmel_twi_dt_ids[] = {
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> index 0aba51a7df32..bcc05a8fe826 100644
> --- a/drivers/i2c/busses/i2c-at91-master.c
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -480,7 +480,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
>         unsigned long time_left;
>         bool has_unre_flag = dev->pdata->has_unre_flag;
>         bool has_alt_cmd = dev->pdata->has_alt_cmd;
> -       struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +       bool has_clear_cmd = dev->pdata->has_clear_cmd;
> 
>         /*
>          * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
> @@ -641,10 +641,32 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
>                                AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
>         }
> 
> -       if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
> -               dev_dbg(dev->dev,
> -                       "SDA is down; clear bus using gpio\n");
> -               i2c_recover_bus(&dev->adapter);
> +       /*
> +        * some faulty I2C slave devices might hold SDA down;
> +        * we can send a bus clear command, hoping that the pins will be
> +        * released
> +        */
> +       if (has_clear_cmd) {
> +               if (!(dev->transfer_status & AT91_TWI_SDA)) {
> +                       dev_dbg(dev->dev,
> +                               "SDA is down; sending bus clear command\n");
> +                       if (dev->use_alt_cmd) {
> +                               unsigned int acr;
> +
> +                               acr = at91_twi_read(dev, AT91_TWI_ACR);
> +                               acr &= ~AT91_TWI_ACR_DATAL_MASK;
> +                               at91_twi_write(dev, AT91_TWI_ACR, acr);
> +                       }
> +                       at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_CLEAR);
> +               }
> +       } else {
> +               struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +
> +               if (rinfo->get_sda && !(rinfo->get_sda(&dev->adapter))) {
> +                       dev_dbg(dev->dev,
> +                               "SDA is down; clear bus using gpio\n");
> +                       i2c_recover_bus(&dev->adapter);
> +               }
>         }
> 
>         return ret;
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> index f57a6cab96b4..7e7b4955ca7f 100644
> --- a/drivers/i2c/busses/i2c-at91.h
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -36,6 +36,7 @@
>  #define        AT91_TWI_SVDIS          BIT(5)  /* Slave Transfer Disable */
>  #define        AT91_TWI_QUICK          BIT(6)  /* SMBus quick command */
>  #define        AT91_TWI_SWRST          BIT(7)  /* Software Reset */
> +#define        AT91_TWI_CLEAR          BIT(15) /* Bus clear command */
>  #define        AT91_TWI_ACMEN          BIT(16) /* Alternative Command Mode Enable */
>  #define        AT91_TWI_ACMDIS         BIT(17) /* Alternative Command Mode Disable */
>  #define        AT91_TWI_THRCLR         BIT(24) /* Transmit Holding Register Clear */
> @@ -69,6 +70,8 @@
>  #define        AT91_TWI_NACK           BIT(8)  /* Not Acknowledged */
>  #define        AT91_TWI_EOSACC         BIT(11) /* End Of Slave Access */
>  #define        AT91_TWI_LOCK           BIT(23) /* TWI Lock due to Frame Errors */
> +#define        AT91_TWI_SCL            BIT(24) /* TWI SCL status */
> +#define        AT91_TWI_SDA            BIT(25) /* TWI SDA status */
> 
>  #define        AT91_TWI_INT_MASK \
>         (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK \
> @@ -81,7 +84,8 @@
>  #define        AT91_TWI_THR            0x0034  /* Transmit Holding Register */
> 
>  #define        AT91_TWI_ACR            0x0040  /* Alternative Command Register */
> -#define        AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
> +#define        AT91_TWI_ACR_DATAL_MASK GENMASK(15, 0)
> +#define        AT91_TWI_ACR_DATAL(len) ((len) & AT91_TWI_ACR_DATAL_MASK)
>  #define        AT91_TWI_ACR_DIR        BIT(8)
> 
>  #define AT91_TWI_FILTR         0x0044
> @@ -118,6 +122,7 @@ struct at91_twi_pdata {
>         bool has_dig_filtr;
>         bool has_adv_dig_filtr;
>         bool has_ana_filtr;
> +       bool has_clear_cmd;
>         struct at_dma_slave dma_slave;
>  };
> 
> --
> 2.20.1
>