LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: <t-kristo@ti.com>
Cc: <robh@kernel.org>, <kishon@ti.com>, <nm@ti.com>, <nsekhar@ti.com>,
	<vigneshr@ti.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com>
Subject: [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux
Date: Tue, 3 Mar 2020 12:17:19 +0200	[thread overview]
Message-ID: <20200303101722.26052-4-rogerq@ti.com> (raw)
In-Reply-To: <20200303101722.26052-1-rogerq@ti.com>

From: Kishon Vijay Abraham I <kishon@ti.com>

Add serdes_ln_ctrl node used for selecting SERDES lane mux.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 27 ++++++++++++
 include/dt-bindings/mux/mux-j721e-wiz.h   | 53 +++++++++++++++++++++++
 2 files changed, 80 insertions(+)
 create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index cbaadee5bfdc..c5d54af37e91 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -5,6 +5,8 @@
  * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
  */
 #include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/mux/mux-j721e-wiz.h>
 
 &cbass_main {
 	msmc_ram: sram@70000000 {
@@ -19,6 +21,31 @@
 		};
 	};
 
+	scm_conf: scm-conf@100000 {
+		compatible = "syscon", "simple-mfd", "ti,j721e-system-controller";
+		reg = <0 0x00100000 0 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+				      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+				      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
+				      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+		};
+	};
+
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
 		#address-cells = <2>;
diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
new file mode 100644
index 000000000000..fd1c4ea9fc7f
--- /dev/null
+++ b/include/dt-bindings/mux/mux-j721e-wiz.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for J721E WIZ.
+ */
+
+#ifndef _DT_BINDINGS_J721E_WIZ
+#define _DT_BINDINGS_J721E_WIZ
+
+#define SERDES0_LANE0_QSGMII_LANE1	0x0
+#define SERDES0_LANE0_PCIE0_LANE0	0x1
+#define SERDES0_LANE0_USB3_0_SWAP	0x2
+
+#define SERDES0_LANE1_QSGMII_LANE2	0x0
+#define SERDES0_LANE1_PCIE0_LANE1	0x1
+#define SERDES0_LANE1_USB3_0		0x2
+
+#define SERDES1_LANE0_QSGMII_LANE3	0x0
+#define SERDES1_LANE0_PCIE1_LANE0	0x1
+#define SERDES1_LANE0_USB3_1_SWAP	0x2
+#define SERDES1_LANE0_SGMII_LANE0	0x3
+
+#define SERDES1_LANE1_QSGMII_LANE4	0x0
+#define SERDES1_LANE1_PCIE1_LANE1	0x1
+#define SERDES1_LANE1_USB3_1		0x2
+#define SERDES1_LANE1_SGMII_LANE1	0x3
+
+#define SERDES2_LANE0_PCIE2_LANE0	0x1
+#define SERDES2_LANE0_SGMII_LANE0	0x3
+#define SERDES2_LANE0_USB3_1_SWAP	0x2
+
+#define SERDES2_LANE1_PCIE2_LANE1	0x1
+#define SERDES2_LANE1_USB3_1		0x2
+#define SERDES2_LANE1_SGMII_LANE1	0x3
+
+#define SERDES3_LANE0_PCIE3_LANE0	0x1
+#define SERDES3_LANE0_USB3_0_SWAP	0x2
+
+#define SERDES3_LANE1_PCIE3_LANE1	0x1
+#define SERDES3_LANE1_USB3_0		0x2
+
+#define SERDES4_LANE0_EDP_LANE0		0x0
+#define SERDES4_LANE0_QSGMII_LANE5	0x2
+
+#define SERDES4_LANE1_EDP_LANE1		0x0
+#define SERDES4_LANE1_QSGMII_LANE6	0x2
+
+#define SERDES4_LANE2_EDP_LANE2		0x0
+#define SERDES4_LANE2_QSGMII_LANE7	0x2
+
+#define SERDES4_LANE3_EDP_LANE3		0x0
+#define SERDES4_LANE3_QSGMII_LANE8	0x2
+
+#endif /* _DT_BINDINGS_J721E_WIZ */
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


  parent reply	other threads:[~2020-03-03 10:17 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-03 10:17 [PATCH v2 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Roger Quadros
2020-03-03 10:17 ` [PATCH v2 1/6] dt-bindings: syscon: Add TI's J721E specific compatible string Roger Quadros
2020-03-03 10:17 ` [PATCH v2 2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes Roger Quadros
2020-03-03 10:17 ` Roger Quadros [this message]
2020-03-10 21:09   ` [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux Rob Herring
2020-03-19 11:37     ` Kishon Vijay Abraham I
2020-04-23  7:03       ` Roger Quadros
2020-04-24 20:15       ` Rob Herring
2020-03-03 10:17 ` [PATCH v2 4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX Roger Quadros
2020-03-03 10:17 ` [PATCH v2 5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 Roger Quadros
2020-03-03 10:17 ` [PATCH v2 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200303101722.26052-4-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).