LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Roger Quadros <rogerq@ti.com>
Cc: yan-liu@ti.com, linux-omap@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Christoph Hellwig <hch@lst.de>,
	Robin Murphy <robin.murphy@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCH] dra7: sata: Fix SATA with CONFIG_ARM_LPAE enabled
Date: Wed, 4 Mar 2020 08:20:57 -0800	[thread overview]
Message-ID: <20200304162057.GV37466@atomide.com> (raw)
In-Reply-To: <20200304090031.30360-1-rogerq@ti.com>

* Roger Quadros <rogerq@ti.com> [200304 09:01]:
> Even though the TRM says that SATA IP has 36 address bits
> wired in the SoC, we see bus errors whenever any address
> greater than 32-bit is given to the controller.
> 
> This happens on dra7-EVM with 4G of RAM with CONFIG_ARM_LPAE=y.
> 
> As a workaround we limit the DMA address range to 32-bits
> for SATA.
> 
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Robin Murphy <robin.murphy@arm.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Reported-by: Yan Liu <yan-liu@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> ---
> 
> NOTE: Currently ARM dma-mapping code doesn't account for devices
> bus_dma_limit. This is fixed in [1].
> 
> [1] https://lkml.org/lkml/2020/2/18/712

So is this dts patch safe to apply without the series above?

And should this dts patch be applied as a fix or can it wait
until the merge window?

Regards,

Tony

>  arch/arm/boot/dts/dra7.dtsi | 25 ++++++++++++++++---------
>  1 file changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index d78b684e7fca..895462c22d1c 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -642,15 +642,22 @@
>  		};
>  
>  		/* OCP2SCP3 */
> -		sata: sata@4a141100 {
> -			compatible = "snps,dwc-ahci";
> -			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
> -			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> -			phys = <&sata_phy>;
> -			phy-names = "sata-phy";
> -			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
> -			ti,hwmods = "sata";
> -			ports-implemented = <0x1>;
> +		sata_aux_bus {
> +			#address-cells = <1>;
> +			#size-cells = <2>;
> +			compatible = "simple-bus";
> +			ranges = <0x0 0x4a140000 0x0 0x1200>;
> +			dma-ranges = <0x0 0x0 0x1 0x00000000>;
> +			sata: sata@4a141100 {
> +				compatible = "snps,dwc-ahci";
> +				reg = <0x0 0x0 0x1100>, <0x1100 0x0 0x7>;
> +				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&sata_phy>;
> +				phy-names = "sata-phy";
> +				clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
> +				ti,hwmods = "sata";
> +				ports-implemented = <0x1>;
> +			};
>  		};
>  
>  		/* OCP2SCP1 */
> -- 
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
> 

  reply	other threads:[~2020-03-04 16:21 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-04  9:00 Roger Quadros
2020-03-04 16:20 ` Tony Lindgren [this message]
2020-03-05 12:05   ` Roger Quadros
2020-03-05 12:30     ` Robin Murphy
2020-03-05 15:16       ` Christoph Hellwig
2020-03-05 16:04 ` Robin Murphy
2020-03-05 16:46   ` Roger Quadros
2020-03-06 15:08     ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200304162057.GV37466@atomide.com \
    --to=tony@atomide.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=rogerq@ti.com \
    --cc=yan-liu@ti.com \
    --subject='Re: [PATCH] dra7: sata: Fix SATA with CONFIG_ARM_LPAE enabled' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).