LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Robert Foss <robert.foss@linaro.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will@kernel.org, shawnguo@kernel.org,
	olof@lixom.net, Anson.Huang@nxp.com, maxime@cerno.tech,
	leonard.crestez@nxp.com, dinguyen@kernel.org,
	marcin.juszkiewicz@linaro.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Loic Poulain <loic.poulain@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Subject: [v1 2/6] arm64: dts: apq8016-sbc: Add CCI/Sensor nodes
Date: Wed, 11 Mar 2020 13:34:57 +0100	[thread overview]
Message-ID: <20200311123501.18202-3-robert.foss@linaro.org> (raw)
In-Reply-To: <20200311123501.18202-1-robert.foss@linaro.org>

From: Loic Poulain <loic.poulain@linaro.org>

Add cci device to msm8916.dtsi.
Add default 96boards camera node for db410c (apq8016-sbc).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 75 +++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 037e26b3f8d5..a3e6982f4f93 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -495,6 +495,81 @@
 		wcnss@a21b000 {
 			status = "okay";
 		};
+
+		camera_vdddo_1v8: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "camera_vdddo";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		camera_vdda_2v8: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "camera_vdda";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+		};
+
+		camera_vddd_1v5: fixedregulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "camera_vddd";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		cci@1b0c000 {
+			status = "ok";
+			i2c-bus@0 {
+				camera_rear@3b {
+					compatible = "ovti,ov5640";
+					reg = <0x3b>;
+
+					enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
+					reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&camera_rear_default>;
+
+					clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+					clock-names = "xclk";
+					clock-frequency = <23880000>;
+
+					vdddo-supply = <&camera_vdddo_1v8>;
+					vdda-supply = <&camera_vdda_2v8>;
+					vddd-supply = <&camera_vddd_1v5>;
+
+					/* No camera mezzanine by default */
+					status = "okay";
+
+					port {
+						ov5640_ep: endpoint {
+							clock-lanes = <1>;
+							data-lanes = <0 2>;
+							remote-endpoint = <&csiphy0_ep>;
+						};
+					};
+				};
+			};
+		};
+
+		camss@1b00000 {
+			status = "ok";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csiphy0_ep: endpoint {
+						clock-lanes = <1>;
+						data-lanes = <0 2>;
+						remote-endpoint = <&ov5640_ep>;
+						status = "okay";
+					};
+				};
+			};
+		};
 	};
 
 	usb2513 {
-- 
2.20.1


  parent reply	other threads:[~2020-03-11 12:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-11 12:34 [v1 0/6] Qualcomm CCI & Camera for db410c & db845c Robert Foss
2020-03-11 12:34 ` [v1 1/6] arm64: dts: msm8916: Add i2c-qcom-cci node Robert Foss
2020-03-12  4:50   ` Bjorn Andersson
2020-03-11 12:34 ` Robert Foss [this message]
2020-03-12  5:03   ` [v1 2/6] arm64: dts: apq8016-sbc: Add CCI/Sensor nodes Bjorn Andersson
2020-03-11 12:34 ` [v1 3/6] arm64: dts: sdm845: Add i2c-qcom-cci node Robert Foss
2020-03-12  5:12   ` Bjorn Andersson
2020-03-11 12:34 ` [v1 4/6] arm64: dts: sdm845-db845c: Add pm_8998 gpio names Robert Foss
2020-03-12  5:13   ` Bjorn Andersson
2020-03-11 12:35 ` [v1 5/6] arm64: dts: sdm845-db845c: Add ov8856 & ov7251 camera nodes Robert Foss
2020-03-12  5:34   ` Bjorn Andersson
2020-03-11 12:35 ` [v1 6/6] arm64: defconfig: Enable QCOM CAMCC, CAMSS and CCI drivers Robert Foss
2020-03-12  5:35   ` Bjorn Andersson
2020-03-17 13:54     ` Robert Foss

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200311123501.18202-3-robert.foss@linaro.org \
    --to=robert.foss@linaro.org \
    --cc=Anson.Huang@nxp.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=marcin.juszkiewicz@linaro.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=olof@lixom.net \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will@kernel.org \
    --subject='Re: [v1 2/6] arm64: dts: apq8016-sbc: Add CCI/Sensor nodes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).